xilinx/ll_temac: Move the Xilinx drivers

Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.

CC: John Williams <john.williams@petalogix.com>
CC: "David H. Lynch Jr." <dhlii@dlasys.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 1330 insertions, 0 deletions

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
new file mode 100644
index 000000000000..8018d7d045b0
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -0,0 +1,1330 @@
+/*
+ * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
+ *
+ * This is a new flat driver which is based on the original emac_lite
+ * driver from John Williams <john.williams@petalogix.com>.
+ *
+ * 2007-2009 (c) Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/interrupt.h>
+
+#define DRIVER_NAME "xilinx_emaclite"
+
+/* Register offsets for the EmacLite Core */
+#define XEL_TXBUFF_OFFSET 	0x0		/* Transmit Buffer */
+#define XEL_MDIOADDR_OFFSET	0x07E4		/* MDIO Address Register */
+#define XEL_MDIOWR_OFFSET	0x07E8		/* MDIO Write Data Register */
+#define XEL_MDIORD_OFFSET	0x07EC		/* MDIO Read Data Register */
+#define XEL_MDIOCTRL_OFFSET	0x07F0		/* MDIO Control Register */
+#define XEL_GIER_OFFSET		0x07F8		/* GIE Register */
+#define XEL_TSR_OFFSET		0x07FC		/* Tx status */
+#define XEL_TPLR_OFFSET		0x07F4		/* Tx packet length */
+
+#define XEL_RXBUFF_OFFSET	0x1000		/* Receive Buffer */
+#define XEL_RPLR_OFFSET		0x100C		/* Rx packet length */
+#define XEL_RSR_OFFSET		0x17FC		/* Rx status */
+
+#define XEL_BUFFER_OFFSET	0x0800		/* Next Tx/Rx buffer's offset */
+
+/* MDIO Address Register Bit Masks */
+#define XEL_MDIOADDR_REGADR_MASK  0x0000001F	/* Register Address */
+#define XEL_MDIOADDR_PHYADR_MASK  0x000003E0	/* PHY Address */
+#define XEL_MDIOADDR_PHYADR_SHIFT 5
+#define XEL_MDIOADDR_OP_MASK	  0x00000400	/* RD/WR Operation */
+
+/* MDIO Write Data Register Bit Masks */
+#define XEL_MDIOWR_WRDATA_MASK	  0x0000FFFF	/* Data to be Written */
+
+/* MDIO Read Data Register Bit Masks */
+#define XEL_MDIORD_RDDATA_MASK	  0x0000FFFF	/* Data to be Read */
+
+/* MDIO Control Register Bit Masks */
+#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001	/* MDIO Status Mask */
+#define XEL_MDIOCTRL_MDIOEN_MASK  0x00000008	/* MDIO Enable */
+
+/* Global Interrupt Enable Register (GIER) Bit Masks */
+#define XEL_GIER_GIE_MASK	0x80000000 	/* Global Enable */
+
+/* Transmit Status Register (TSR) Bit Masks */
+#define XEL_TSR_XMIT_BUSY_MASK	 0x00000001 	/* Tx complete */
+#define XEL_TSR_PROGRAM_MASK	 0x00000002 	/* Program the MAC address */
+#define XEL_TSR_XMIT_IE_MASK	 0x00000008 	/* Tx interrupt enable bit */
+#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 	/* Buffer is active, SW bit
+						 * only. This is not documented
+						 * in the HW spec */
+
+/* Define for programming the MAC address into the EmacLite */
+#define XEL_TSR_PROG_MAC_ADDR	(XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
+
+/* Receive Status Register (RSR) */
+#define XEL_RSR_RECV_DONE_MASK	0x00000001 	/* Rx complete */
+#define XEL_RSR_RECV_IE_MASK	0x00000008 	/* Rx interrupt enable bit */
+
+/* Transmit Packet Length Register (TPLR) */
+#define XEL_TPLR_LENGTH_MASK	0x0000FFFF 	/* Tx packet length */
+
+/* Receive Packet Length Register (RPLR) */
+#define XEL_RPLR_LENGTH_MASK	0x0000FFFF 	/* Rx packet length */
+
+#define XEL_HEADER_OFFSET	12 		/* Offset to length field */
+#define XEL_HEADER_SHIFT	16 		/* Shift value for length */
+
+/* General Ethernet Definitions */
+#define XEL_ARP_PACKET_SIZE		28 	/* Max ARP packet size */
+#define XEL_HEADER_IP_LENGTH_OFFSET	16 	/* IP Length Offset */
+
+
+
+#define TX_TIMEOUT		(60*HZ)		/* Tx timeout is 60 seconds. */
+#define ALIGNMENT		4
+
+/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+
+/**
+ * struct net_local - Our private per device data
+ * @ndev:		instance of the network device
+ * @tx_ping_pong:	indicates whether Tx Pong buffer is configured in HW
+ * @rx_ping_pong:	indicates whether Rx Pong buffer is configured in HW
+ * @next_tx_buf_to_use:	next Tx buffer to write to
+ * @next_rx_buf_to_use:	next Rx buffer to read from
+ * @base_addr:		base address of the Emaclite device
+ * @reset_lock:		lock used for synchronization
+ * @deferred_skb:	holds an skb (for transmission at a later time) when the
+ *			Tx buffer is not free
+ * @phy_dev:		pointer to the PHY device
+ * @phy_node:		pointer to the PHY device node
+ * @mii_bus:		pointer to the MII bus
+ * @mdio_irqs:		IRQs table for MDIO bus
+ * @last_link:		last link status
+ * @has_mdio:		indicates whether MDIO is included in the HW
+ */
+struct net_local {
+
+	struct net_device *ndev;
+
+	bool tx_ping_pong;
+	bool rx_ping_pong;
+	u32 next_tx_buf_to_use;
+	u32 next_rx_buf_to_use;
+	void __iomem *base_addr;
+
+	spinlock_t reset_lock;
+	struct sk_buff *deferred_skb;
+
+	struct phy_device *phy_dev;
+	struct device_node *phy_node;
+
+	struct mii_bus *mii_bus;
+	int mdio_irqs[PHY_MAX_ADDR];
+
+	int last_link;
+	bool has_mdio;
+};
+
+
+/*************************/
+/* EmacLite driver calls */
+/*************************/
+
+/**
+ * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device
+ * @drvdata:	Pointer to the Emaclite device private data
+ *
+ * This function enables the Tx and Rx interrupts for the Emaclite device along
+ * with the Global Interrupt Enable.
+ */
+static void xemaclite_enable_interrupts(struct net_local *drvdata)
+{
+	u32 reg_data;
+
+	/* Enable the Tx interrupts for the first Buffer */
+	reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
+	out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
+		 reg_data | XEL_TSR_XMIT_IE_MASK);
+
+	/* Enable the Tx interrupts for the second Buffer if
+	 * configured in HW */
+	if (drvdata->tx_ping_pong != 0) {
+		reg_data = in_be32(drvdata->base_addr +
+				   XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+			 XEL_TSR_OFFSET,
+			 reg_data | XEL_TSR_XMIT_IE_MASK);
+	}
+
+	/* Enable the Rx interrupts for the first buffer */
+	out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
+		 XEL_RSR_RECV_IE_MASK);
+
+	/* Enable the Rx interrupts for the second Buffer if
+	 * configured in HW */
+	if (drvdata->rx_ping_pong != 0) {
+		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+			 XEL_RSR_OFFSET,
+			 XEL_RSR_RECV_IE_MASK);
+	}
+
+	/* Enable the Global Interrupt Enable */
+	out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+}
+
+/**
+ * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device
+ * @drvdata:	Pointer to the Emaclite device private data
+ *
+ * This function disables the Tx and Rx interrupts for the Emaclite device,
+ * along with the Global Interrupt Enable.
+ */
+static void xemaclite_disable_interrupts(struct net_local *drvdata)
+{
+	u32 reg_data;
+
+	/* Disable the Global Interrupt Enable */
+	out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+
+	/* Disable the Tx interrupts for the first buffer */
+	reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
+	out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
+		 reg_data & (~XEL_TSR_XMIT_IE_MASK));
+
+	/* Disable the Tx interrupts for the second Buffer
+	 * if configured in HW */
+	if (drvdata->tx_ping_pong != 0) {
+		reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+				   XEL_TSR_OFFSET);
+		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+			 XEL_TSR_OFFSET,
+			 reg_data & (~XEL_TSR_XMIT_IE_MASK));
+	}
+
+	/* Disable the Rx interrupts for the first buffer */
+	reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
+	out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
+		 reg_data & (~XEL_RSR_RECV_IE_MASK));
+
+	/* Disable the Rx interrupts for the second buffer
+	 * if configured in HW */
+	if (drvdata->rx_ping_pong != 0) {
+
+		reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+				   XEL_RSR_OFFSET);
+		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+			 XEL_RSR_OFFSET,
+			 reg_data & (~XEL_RSR_RECV_IE_MASK));
+	}
+}
+
+/**
+ * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address
+ * @src_ptr:	Void pointer to the 16-bit aligned source address
+ * @dest_ptr:	Pointer to the 32-bit aligned destination address
+ * @length:	Number bytes to write from source to destination
+ *
+ * This function writes data from a 16-bit aligned buffer to a 32-bit aligned
+ * address in the EmacLite device.
+ */
+static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
+				    unsigned length)
+{
+	u32 align_buffer;
+	u32 *to_u32_ptr;
+	u16 *from_u16_ptr, *to_u16_ptr;
+
+	to_u32_ptr = dest_ptr;
+	from_u16_ptr = src_ptr;
+	align_buffer = 0;
+
+	for (; length > 3; length -= 4) {
+		to_u16_ptr = (u16 *)&align_buffer;
+		*to_u16_ptr++ = *from_u16_ptr++;
+		*to_u16_ptr++ = *from_u16_ptr++;
+
+		/* Output a word */
+		*to_u32_ptr++ = align_buffer;
+	}
+	if (length) {
+		u8 *from_u8_ptr, *to_u8_ptr;
+
+		/* Set up to output the remaining data */
+		align_buffer = 0;
+		to_u8_ptr = (u8 *) &align_buffer;
+		from_u8_ptr = (u8 *) from_u16_ptr;
+
+		/* Output the remaining data */
+		for (; length > 0; length--)
+			*to_u8_ptr++ = *from_u8_ptr++;
+
+		*to_u32_ptr = align_buffer;
+	}
+}
+
+/**
+ * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer
+ * @src_ptr:	Pointer to the 32-bit aligned source address
+ * @dest_ptr:	Pointer to the 16-bit aligned destination address
+ * @length:	Number bytes to read from source to destination
+ *
+ * This function reads data from a 32-bit aligned address in the EmacLite device
+ * to a 16-bit aligned buffer.
+ */
+static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
+				   unsigned length)
+{
+	u16 *to_u16_ptr, *from_u16_ptr;
+	u32 *from_u32_ptr;
+	u32 align_buffer;
+
+	from_u32_ptr = src_ptr;
+	to_u16_ptr = (u16 *) dest_ptr;
+
+	for (; length > 3; length -= 4) {
+		/* Copy each word into the temporary buffer */
+		align_buffer = *from_u32_ptr++;
+		from_u16_ptr = (u16 *)&align_buffer;
+
+		/* Read data from source */
+		*to_u16_ptr++ = *from_u16_ptr++;
+		*to_u16_ptr++ = *from_u16_ptr++;
+	}
+
+	if (length) {
+		u8 *to_u8_ptr, *from_u8_ptr;
+
+		/* Set up to read the remaining data */
+		to_u8_ptr = (u8 *) to_u16_ptr;
+		align_buffer = *from_u32_ptr++;
+		from_u8_ptr = (u8 *) &align_buffer;
+
+		/* Read the remaining data */
+		for (; length > 0; length--)
+			*to_u8_ptr = *from_u8_ptr;
+	}
+}
+
+/**
+ * xemaclite_send_data - Send an Ethernet frame
+ * @drvdata:	Pointer to the Emaclite device private data
+ * @data:	Pointer to the data to be sent
+ * @byte_count:	Total frame size, including header
+ *
+ * This function checks if the Tx buffer of the Emaclite device is free to send
+ * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it
+ * returns an error.
+ *
+ * Return:	0 upon success or -1 if the buffer(s) are full.
+ *
+ * Note:	The maximum Tx packet size can not be more than Ethernet header
+ *		(14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS.
+ */
+static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
+			       unsigned int byte_count)
+{
+	u32 reg_data;
+	void __iomem *addr;
+
+	/* Determine the expected Tx buffer address */
+	addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
+
+	/* If the length is too large, truncate it */
+	if (byte_count > ETH_FRAME_LEN)
+		byte_count = ETH_FRAME_LEN;
+
+	/* Check if the expected buffer is available */
+	reg_data = in_be32(addr + XEL_TSR_OFFSET);
+	if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
+	     XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
+
+		/* Switch to next buffer if configured */
+		if (drvdata->tx_ping_pong != 0)
+			drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
+	} else if (drvdata->tx_ping_pong != 0) {
+		/* If the expected buffer is full, try the other buffer,
+		 * if it is configured in HW */
+
+		addr = (void __iomem __force *)((u32 __force)addr ^
+						 XEL_BUFFER_OFFSET);
+		reg_data = in_be32(addr + XEL_TSR_OFFSET);
+
+		if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
+		     XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
+			return -1; /* Buffers were full, return failure */
+	} else
+		return -1; /* Buffer was full, return failure */
+
+	/* Write the frame to the buffer */
+	xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+
+	out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
+
+	/* Update the Tx Status Register to indicate that there is a
+	 * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
+	 * is used by the interrupt handler to check whether a frame
+	 * has been transmitted */
+	reg_data = in_be32(addr + XEL_TSR_OFFSET);
+	reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
+	out_be32(addr + XEL_TSR_OFFSET, reg_data);
+
+	return 0;
+}
+
+/**
+ * xemaclite_recv_data - Receive a frame
+ * @drvdata:	Pointer to the Emaclite device private data
+ * @data:	Address where the data is to be received
+ *
+ * This function is intended to be called from the interrupt context or
+ * with a wrapper which waits for the receive frame to be available.
+ *
+ * Return:	Total number of bytes received
+ */
+static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
+{
+	void __iomem *addr;
+	u16 length, proto_type;
+	u32 reg_data;
+
+	/* Determine the expected buffer address */
+	addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);
+
+	/* Verify which buffer has valid data */
+	reg_data = in_be32(addr + XEL_RSR_OFFSET);
+
+	if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+		if (drvdata->rx_ping_pong != 0)
+			drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET;
+	} else {
+		/* The instance is out of sync, try other buffer if other
+		 * buffer is configured, return 0 otherwise. If the instance is
+		 * out of sync, do not update the 'next_rx_buf_to_use' since it
+		 * will correct on subsequent calls */
+		if (drvdata->rx_ping_pong != 0)
+			addr = (void __iomem __force *)((u32 __force)addr ^
+							 XEL_BUFFER_OFFSET);
+		else
+			return 0;	/* No data was available */
+
+		/* Verify that buffer has valid data */
+		reg_data = in_be32(addr + XEL_RSR_OFFSET);
+		if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
+		     XEL_RSR_RECV_DONE_MASK)
+			return 0;	/* No data was available */
+	}
+
+	/* Get the protocol type of the ethernet frame that arrived */
+	proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
+			XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
+			XEL_RPLR_LENGTH_MASK);
+
+	/* Check if received ethernet frame is a raw ethernet frame
+	 * or an IP packet or an ARP packet */
+	if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+
+		if (proto_type == ETH_P_IP) {
+			length = ((ntohl(in_be32(addr +
+					XEL_HEADER_IP_LENGTH_OFFSET +
+					XEL_RXBUFF_OFFSET)) >>
+					XEL_HEADER_SHIFT) &
+					XEL_RPLR_LENGTH_MASK);
+			length += ETH_HLEN + ETH_FCS_LEN;
+
+		} else if (proto_type == ETH_P_ARP)
+			length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
+		else
+			/* Field contains type other than IP or ARP, use max
+			 * frame size and let user parse it */
+			length = ETH_FRAME_LEN + ETH_FCS_LEN;
+	} else
+		/* Use the length in the frame, plus the header and trailer */
+		length = proto_type + ETH_HLEN + ETH_FCS_LEN;
+
+	/* Read from the EmacLite device */
+	xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+				data, length);
+
+	/* Acknowledge the frame */
+	reg_data = in_be32(addr + XEL_RSR_OFFSET);
+	reg_data &= ~XEL_RSR_RECV_DONE_MASK;
+	out_be32(addr + XEL_RSR_OFFSET, reg_data);
+
+	return length;
+}
+
+/**
+ * xemaclite_update_address - Update the MAC address in the device
+ * @drvdata:	Pointer to the Emaclite device private data
+ * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value)
+ *
+ * Tx must be idle and Rx should be idle for deterministic results.
+ * It is recommended that this function should be called after the
+ * initialization and before transmission of any packets from the device.
+ * The MAC address can be programmed using any of the two transmit
+ * buffers (if configured).
+ */
+static void xemaclite_update_address(struct net_local *drvdata,
+				     u8 *address_ptr)
+{
+	void __iomem *addr;
+	u32 reg_data;
+
+	/* Determine the expected Tx buffer address */
+	addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
+
+	xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+
+	out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
+
+	/* Update the MAC address in the EmacLite */
+	reg_data = in_be32(addr + XEL_TSR_OFFSET);
+	out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
+
+	/* Wait for EmacLite to finish with the MAC address update */
+	while ((in_be32(addr + XEL_TSR_OFFSET) &
+		XEL_TSR_PROG_MAC_ADDR) != 0)
+		;
+}
+
+/**
+ * xemaclite_set_mac_address - Set the MAC address for this device
+ * @dev:	Pointer to the network device instance
+ * @addr:	Void pointer to the sockaddr structure
+ *
+ * This function copies the HW address from the sockaddr strucutre to the
+ * net_device structure and updates the address in HW.
+ *
+ * Return:	Error if the net device is busy or 0 if the addr is set
+ *		successfully
+ */
+static int xemaclite_set_mac_address(struct net_device *dev, void *address)
+{
+	struct net_local *lp = netdev_priv(dev);
+	struct sockaddr *addr = address;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	xemaclite_update_address(lp, dev->dev_addr);
+	return 0;
+}
+
+/**
+ * xemaclite_tx_timeout - Callback for Tx Timeout
+ * @dev:	Pointer to the network device
+ *
+ * This function is called when Tx time out occurs for Emaclite device.
+ */
+static void xemaclite_tx_timeout(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n",
+		TX_TIMEOUT * 1000UL / HZ);
+
+	dev->stats.tx_errors++;
+
+	/* Reset the device */
+	spin_lock_irqsave(&lp->reset_lock, flags);
+
+	/* Shouldn't really be necessary, but shouldn't hurt */
+	netif_stop_queue(dev);
+
+	xemaclite_disable_interrupts(lp);
+	xemaclite_enable_interrupts(lp);
+
+	if (lp->deferred_skb) {
+		dev_kfree_skb(lp->deferred_skb);
+		lp->deferred_skb = NULL;
+		dev->stats.tx_errors++;
+	}
+
+	/* To exclude tx timeout */
+	dev->trans_start = jiffies; /* prevent tx timeout */
+
+	/* We're all ready to go. Start the queue */
+	netif_wake_queue(dev);
+	spin_unlock_irqrestore(&lp->reset_lock, flags);
+}
+
+/**********************/
+/* Interrupt Handlers */
+/**********************/
+
+/**
+ * xemaclite_tx_handler - Interrupt handler for frames sent
+ * @dev:	Pointer to the network device
+ *
+ * This function updates the number of packets transmitted and handles the
+ * deferred skb, if there is one.
+ */
+static void xemaclite_tx_handler(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+
+	dev->stats.tx_packets++;
+	if (lp->deferred_skb) {
+		if (xemaclite_send_data(lp,
+					(u8 *) lp->deferred_skb->data,
+					lp->deferred_skb->len) != 0)
+			return;
+		else {
+			dev->stats.tx_bytes += lp->deferred_skb->len;
+			dev_kfree_skb_irq(lp->deferred_skb);
+			lp->deferred_skb = NULL;
+			dev->trans_start = jiffies; /* prevent tx timeout */
+			netif_wake_queue(dev);
+		}
+	}
+}
+
+/**
+ * xemaclite_rx_handler- Interrupt handler for frames received
+ * @dev:	Pointer to the network device
+ *
+ * This function allocates memory for a socket buffer, fills it with data
+ * received and hands it over to the TCP/IP stack.
+ */
+static void xemaclite_rx_handler(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	struct sk_buff *skb;
+	unsigned int align;
+	u32 len;
+
+	len = ETH_FRAME_LEN + ETH_FCS_LEN;
+	skb = dev_alloc_skb(len + ALIGNMENT);
+	if (!skb) {
+		/* Couldn't get memory. */
+		dev->stats.rx_dropped++;
+		dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n");
+		return;
+	}
+
+	/*
+	 * A new skb should have the data halfword aligned, but this code is
+	 * here just in case that isn't true. Calculate how many
+	 * bytes we should reserve to get the data to start on a word
+	 * boundary */
+	align = BUFFER_ALIGN(skb->data);
+	if (align)
+		skb_reserve(skb, align);
+
+	skb_reserve(skb, 2);
+
+	len = xemaclite_recv_data(lp, (u8 *) skb->data);
+
+	if (!len) {
+		dev->stats.rx_errors++;
+		dev_kfree_skb_irq(skb);
+		return;
+	}
+
+	skb_put(skb, len);	/* Tell the skb how much data we got */
+
+	skb->protocol = eth_type_trans(skb, dev);
+	skb_checksum_none_assert(skb);
+
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += len;
+
+	if (!skb_defer_rx_timestamp(skb))
+		netif_rx(skb);	/* Send the packet upstream */
+}
+
+/**
+ * xemaclite_interrupt - Interrupt handler for this driver
+ * @irq:	Irq of the Emaclite device
+ * @dev_id:	Void pointer to the network device instance used as callback
+ *		reference
+ *
+ * This function handles the Tx and Rx interrupts of the EmacLite device.
+ */
+static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
+{
+	bool tx_complete = 0;
+	struct net_device *dev = dev_id;
+	struct net_local *lp = netdev_priv(dev);
+	void __iomem *base_addr = lp->base_addr;
+	u32 tx_status;
+
+	/* Check if there is Rx Data available */
+	if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
+			(in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
+			 & XEL_RSR_RECV_DONE_MASK))
+
+		xemaclite_rx_handler(dev);
+
+	/* Check if the Transmission for the first buffer is completed */
+	tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
+	if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
+		(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
+
+		tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
+		out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
+
+		tx_complete = 1;
+	}
+
+	/* Check if the Transmission for the second buffer is completed */
+	tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+	if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
+		(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
+
+		tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
+		out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
+			 tx_status);
+
+		tx_complete = 1;
+	}
+
+	/* If there was a Tx interrupt, call the Tx Handler */
+	if (tx_complete != 0)
+		xemaclite_tx_handler(dev);
+
+	return IRQ_HANDLED;
+}
+
+/**********************/
+/* MDIO Bus functions */
+/**********************/
+
+/**
+ * xemaclite_mdio_wait - Wait for the MDIO to be ready to use
+ * @lp:		Pointer to the Emaclite device private data
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request.
+ *
+ * Return:	0 for success or ETIMEDOUT for a timeout
+ */
+
+static int xemaclite_mdio_wait(struct net_local *lp)
+{
+	long end = jiffies + 2;
+
+	/* wait for the MDIO interface to not be busy or timeout
+	   after some time.
+	*/
+	while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
+			XEL_MDIOCTRL_MDIOSTS_MASK) {
+		if (end - jiffies <= 0) {
+			WARN_ON(1);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+	return 0;
+}
+
+/**
+ * xemaclite_mdio_read - Read from a given MII management register
+ * @bus:	the mii_bus struct
+ * @phy_id:	the phy address
+ * @reg:	register number to read from
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request and then writes the phy address to the MDIO Address register
+ * and reads data from MDIO Read Data register, when its available.
+ *
+ * Return:	Value read from the MII management register
+ */
+static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct net_local *lp = bus->priv;
+	u32 ctrl_reg;
+	u32 rc;
+
+	if (xemaclite_mdio_wait(lp))
+		return -ETIMEDOUT;
+
+	/* Write the PHY address, register number and set the OP bit in the
+	 * MDIO Address register. Set the Status bit in the MDIO Control
+	 * register to start a MDIO read transaction.
+	 */
+	ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+	out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
+		 XEL_MDIOADDR_OP_MASK |
+		 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
+	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+		 ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+	if (xemaclite_mdio_wait(lp))
+		return -ETIMEDOUT;
+
+	rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
+
+	dev_dbg(&lp->ndev->dev,
+		"xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
+		phy_id, reg, rc);
+
+	return rc;
+}
+
+/**
+ * xemaclite_mdio_write - Write to a given MII management register
+ * @bus:	the mii_bus struct
+ * @phy_id:	the phy address
+ * @reg:	register number to write to
+ * @val:	value to write to the register number specified by reg
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request and then writes the val to the MDIO Write Data register.
+ */
+static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+				u16 val)
+{
+	struct net_local *lp = bus->priv;
+	u32 ctrl_reg;
+
+	dev_dbg(&lp->ndev->dev,
+		"xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+		phy_id, reg, val);
+
+	if (xemaclite_mdio_wait(lp))
+		return -ETIMEDOUT;
+
+	/* Write the PHY address, register number and clear the OP bit in the
+	 * MDIO Address register and then write the value into the MDIO Write
+	 * Data register. Finally, set the Status bit in the MDIO Control
+	 * register to start a MDIO write transaction.
+	 */
+	ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+	out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
+		 ~XEL_MDIOADDR_OP_MASK &
+		 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
+	out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
+	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+		 ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+	return 0;
+}
+
+/**
+ * xemaclite_mdio_reset - Reset the mdio bus.
+ * @bus:	Pointer to the MII bus
+ *
+ * This function is required(?) as per Documentation/networking/phy.txt.
+ * There is no reset in this device; this function always returns 0.
+ */
+static int xemaclite_mdio_reset(struct mii_bus *bus)
+{
+	return 0;
+}
+
+/**
+ * xemaclite_mdio_setup - Register mii_bus for the Emaclite device
+ * @lp:		Pointer to the Emaclite device private data
+ * @ofdev:	Pointer to OF device structure
+ *
+ * This function enables MDIO bus in the Emaclite device and registers a
+ * mii_bus.
+ *
+ * Return:	0 upon success or a negative error upon failure
+ */
+static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
+{
+	struct mii_bus *bus;
+	int rc;
+	struct resource res;
+	struct device_node *np = of_get_parent(lp->phy_node);
+
+	/* Don't register the MDIO bus if the phy_node or its parent node
+	 * can't be found.
+	 */
+	if (!np)
+		return -ENODEV;
+
+	/* Enable the MDIO bus by asserting the enable bit in MDIO Control
+	 * register.
+	 */
+	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+		 XEL_MDIOCTRL_MDIOEN_MASK);
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return -ENOMEM;
+
+	of_address_to_resource(np, 0, &res);
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+		 (unsigned long long)res.start);
+	bus->priv = lp;
+	bus->name = "Xilinx Emaclite MDIO";
+	bus->read = xemaclite_mdio_read;
+	bus->write = xemaclite_mdio_write;
+	bus->reset = xemaclite_mdio_reset;
+	bus->parent = dev;
+	bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+	lp->mii_bus = bus;
+
+	rc = of_mdiobus_register(bus, np);
+	if (rc)
+		goto err_register;
+
+	return 0;
+
+err_register:
+	mdiobus_free(bus);
+	return rc;
+}
+
+/**
+ * xemaclite_adjust_link - Link state callback for the Emaclite device
+ * @ndev: pointer to net_device struct
+ *
+ * There's nothing in the Emaclite device to be configured when the link
+ * state changes. We just print the status.
+ */
+void xemaclite_adjust_link(struct net_device *ndev)
+{
+	struct net_local *lp = netdev_priv(ndev);
+	struct phy_device *phy = lp->phy_dev;
+	int link_state;
+
+	/* hash together the state values to decide if something has changed */
+	link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+	if (lp->last_link != link_state) {
+		lp->last_link = link_state;
+		phy_print_status(phy);
+	}
+}
+
+/**
+ * xemaclite_open - Open the network device
+ * @dev:	Pointer to the network device
+ *
+ * This function sets the MAC address, requests an IRQ and enables interrupts
+ * for the Emaclite device and starts the Tx queue.
+ * It also connects to the phy device, if MDIO is included in Emaclite device.
+ */
+static int xemaclite_open(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	int retval;
+
+	/* Just to be safe, stop the device first */
+	xemaclite_disable_interrupts(lp);
+
+	if (lp->phy_node) {
+		u32 bmcr;
+
+		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+					     xemaclite_adjust_link, 0,
+					     PHY_INTERFACE_MODE_MII);
+		if (!lp->phy_dev) {
+			dev_err(&lp->ndev->dev, "of_phy_connect() failed\n");
+			return -ENODEV;
+		}
+
+		/* EmacLite doesn't support giga-bit speeds */
+		lp->phy_dev->supported &= (PHY_BASIC_FEATURES);
+		lp->phy_dev->advertising = lp->phy_dev->supported;
+
+		/* Don't advertise 1000BASE-T Full/Half duplex speeds */
+		phy_write(lp->phy_dev, MII_CTRL1000, 0);
+
+		/* Advertise only 10 and 100mbps full/half duplex speeds */
+		phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL);
+
+		/* Restart auto negotiation */
+		bmcr = phy_read(lp->phy_dev, MII_BMCR);
+		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+		phy_write(lp->phy_dev, MII_BMCR, bmcr);
+
+		phy_start(lp->phy_dev);
+	}
+
+	/* Set the MAC address each time opened */
+	xemaclite_update_address(lp, dev->dev_addr);
+
+	/* Grab the IRQ */
+	retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev);
+	if (retval) {
+		dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n",
+			dev->irq);
+		if (lp->phy_dev)
+			phy_disconnect(lp->phy_dev);
+		lp->phy_dev = NULL;
+
+		return retval;
+	}
+
+	/* Enable Interrupts */
+	xemaclite_enable_interrupts(lp);
+
+	/* We're ready to go */
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+/**
+ * xemaclite_close - Close the network device
+ * @dev:	Pointer to the network device
+ *
+ * This function stops the Tx queue, disables interrupts and frees the IRQ for
+ * the Emaclite device.
+ * It also disconnects the phy device associated with the Emaclite device.
+ */
+static int xemaclite_close(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+
+	netif_stop_queue(dev);
+	xemaclite_disable_interrupts(lp);
+	free_irq(dev->irq, dev);
+
+	if (lp->phy_dev)
+		phy_disconnect(lp->phy_dev);
+	lp->phy_dev = NULL;
+
+	return 0;
+}
+
+/**
+ * xemaclite_send - Transmit a frame
+ * @orig_skb:	Pointer to the socket buffer to be transmitted
+ * @dev:	Pointer to the network device
+ *
+ * This function checks if the Tx buffer of the Emaclite device is free to send
+ * data. If so, it fills the Tx buffer with data from socket buffer data,
+ * updates the stats and frees the socket buffer. The Tx completion is signaled
+ * by an interrupt. If the Tx buffer isn't free, then the socket buffer is
+ * deferred and the Tx queue is stopped so that the deferred socket buffer can
+ * be transmitted when the Emaclite device is free to transmit data.
+ *
+ * Return:	0, always.
+ */
+static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	struct sk_buff *new_skb;
+	unsigned int len;
+	unsigned long flags;
+
+	len = orig_skb->len;
+
+	new_skb = orig_skb;
+
+	spin_lock_irqsave(&lp->reset_lock, flags);
+	if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+		/* If the Emaclite Tx buffer is busy, stop the Tx queue and
+		 * defer the skb for transmission during the ISR, after the
+		 * current transmission is complete */
+		netif_stop_queue(dev);
+		lp->deferred_skb = new_skb;
+		/* Take the time stamp now, since we can't do this in an ISR. */
+		skb_tx_timestamp(new_skb);
+		spin_unlock_irqrestore(&lp->reset_lock, flags);
+		return 0;
+	}
+	spin_unlock_irqrestore(&lp->reset_lock, flags);
+
+	skb_tx_timestamp(new_skb);
+
+	dev->stats.tx_bytes += len;
+	dev_kfree_skb(new_skb);
+
+	return 0;
+}
+
+/**
+ * xemaclite_remove_ndev - Free the network device
+ * @ndev:	Pointer to the network device to be freed
+ *
+ * This function un maps the IO region of the Emaclite device and frees the net
+ * device.
+ */
+static void xemaclite_remove_ndev(struct net_device *ndev)
+{
+	if (ndev) {
+		struct net_local *lp = netdev_priv(ndev);
+
+		if (lp->base_addr)
+			iounmap((void __iomem __force *) (lp->base_addr));
+		free_netdev(ndev);
+	}
+}
+
+/**
+ * get_bool - Get a parameter from the OF device
+ * @ofdev:	Pointer to OF device structure
+ * @s:		Property to be retrieved
+ *
+ * This function looks for a property in the device node and returns the value
+ * of the property if its found or 0 if the property is not found.
+ *
+ * Return:	Value of the parameter if the parameter is found, or 0 otherwise
+ */
+static bool get_bool(struct platform_device *ofdev, const char *s)
+{
+	u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
+
+	if (p) {
+		return (bool)*p;
+	} else {
+		dev_warn(&ofdev->dev, "Parameter %s not found,"
+			"defaulting to false\n", s);
+		return 0;
+	}
+}
+
+static struct net_device_ops xemaclite_netdev_ops;
+
+/**
+ * xemaclite_of_probe - Probe method for the Emaclite device.
+ * @ofdev:	Pointer to OF device structure
+ * @match:	Pointer to the structure used for matching a device
+ *
+ * This function probes for the Emaclite device in the device tree.
+ * It initializes the driver data structure and the hardware, sets the MAC
+ * address and registers the network device.
+ * It also registers a mii_bus for the Emaclite device, if MDIO is included
+ * in the device.
+ *
+ * Return:	0, if the driver is bound to the Emaclite device, or
+ *		a negative error if there is failure.
+ */
+static int __devinit xemaclite_of_probe(struct platform_device *ofdev)
+{
+	struct resource r_irq; /* Interrupt resources */
+	struct resource r_mem; /* IO mem resources */
+	struct net_device *ndev = NULL;
+	struct net_local *lp = NULL;
+	struct device *dev = &ofdev->dev;
+	const void *mac_address;
+
+	int rc = 0;
+
+	dev_info(dev, "Device Tree Probing\n");
+
+	/* Get iospace for the device */
+	rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
+	if (rc) {
+		dev_err(dev, "invalid address\n");
+		return rc;
+	}
+
+	/* Get IRQ for the device */
+	rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
+	if (rc == NO_IRQ) {
+		dev_err(dev, "no IRQ found\n");
+		return rc;
+	}
+
+	/* Create an ethernet device instance */
+	ndev = alloc_etherdev(sizeof(struct net_local));
+	if (!ndev) {
+		dev_err(dev, "Could not allocate network device\n");
+		return -ENOMEM;
+	}
+
+	dev_set_drvdata(dev, ndev);
+	SET_NETDEV_DEV(ndev, &ofdev->dev);
+
+	ndev->irq = r_irq.start;
+	ndev->mem_start = r_mem.start;
+	ndev->mem_end = r_mem.end;
+
+	lp = netdev_priv(ndev);
+	lp->ndev = ndev;
+
+	if (!request_mem_region(ndev->mem_start,
+				ndev->mem_end - ndev->mem_start + 1,
+				DRIVER_NAME)) {
+		dev_err(dev, "Couldn't lock memory region at %p\n",
+			(void *)ndev->mem_start);
+		rc = -EBUSY;
+		goto error2;
+	}
+
+	/* Get the virtual base address for the device */
+	lp->base_addr = ioremap(r_mem.start, resource_size(&r_mem));
+	if (NULL == lp->base_addr) {
+		dev_err(dev, "EmacLite: Could not allocate iomem\n");
+		rc = -EIO;
+		goto error1;
+	}
+
+	spin_lock_init(&lp->reset_lock);
+	lp->next_tx_buf_to_use = 0x0;
+	lp->next_rx_buf_to_use = 0x0;
+	lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong");
+	lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong");
+	mac_address = of_get_mac_address(ofdev->dev.of_node);
+
+	if (mac_address)
+		/* Set the MAC address. */
+		memcpy(ndev->dev_addr, mac_address, 6);
+	else
+		dev_warn(dev, "No MAC address found\n");
+
+	/* Clear the Tx CSR's in case this is a restart */
+	out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
+	out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
+
+	/* Set the MAC address in the EmacLite device */
+	xemaclite_update_address(lp, ndev->dev_addr);
+
+	lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0);
+	rc = xemaclite_mdio_setup(lp, &ofdev->dev);
+	if (rc)
+		dev_warn(&ofdev->dev, "error registering MDIO bus\n");
+
+	dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr);
+
+	ndev->netdev_ops = &xemaclite_netdev_ops;
+	ndev->flags &= ~IFF_MULTICAST;
+	ndev->watchdog_timeo = TX_TIMEOUT;
+
+	/* Finally, register the device */
+	rc = register_netdev(ndev);
+	if (rc) {
+		dev_err(dev,
+			"Cannot register network device, aborting\n");
+		goto error1;
+	}
+
+	dev_info(dev,
+		 "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n",
+		 (unsigned int __force)ndev->mem_start,
+		 (unsigned int __force)lp->base_addr, ndev->irq);
+	return 0;
+
+error1:
+	release_mem_region(ndev->mem_start, resource_size(&r_mem));
+
+error2:
+	xemaclite_remove_ndev(ndev);
+	return rc;
+}
+
+/**
+ * xemaclite_of_remove - Unbind the driver from the Emaclite device.
+ * @of_dev:	Pointer to OF device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees any resources allocated to
+ * the device.
+ *
+ * Return:	0, always.
+ */
+static int __devexit xemaclite_of_remove(struct platform_device *of_dev)
+{
+	struct device *dev = &of_dev->dev;
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	struct net_local *lp = netdev_priv(ndev);
+
+	/* Un-register the mii_bus, if configured */
+	if (lp->has_mdio) {
+		mdiobus_unregister(lp->mii_bus);
+		kfree(lp->mii_bus->irq);
+		mdiobus_free(lp->mii_bus);
+		lp->mii_bus = NULL;
+	}
+
+	unregister_netdev(ndev);
+
+	if (lp->phy_node)
+		of_node_put(lp->phy_node);
+	lp->phy_node = NULL;
+
+	release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1);
+
+	xemaclite_remove_ndev(ndev);
+	dev_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+xemaclite_poll_controller(struct net_device *ndev)
+{
+	disable_irq(ndev->irq);
+	xemaclite_interrupt(ndev->irq, ndev);
+	enable_irq(ndev->irq);
+}
+#endif
+
+static struct net_device_ops xemaclite_netdev_ops = {
+	.ndo_open		= xemaclite_open,
+	.ndo_stop		= xemaclite_close,
+	.ndo_start_xmit		= xemaclite_send,
+	.ndo_set_mac_address	= xemaclite_set_mac_address,
+	.ndo_tx_timeout		= xemaclite_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller = xemaclite_poll_controller,
+#endif
+};
+
+/* Match table for OF platform binding */
+static struct of_device_id xemaclite_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,opb-ethernetlite-1.01.a", },
+	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
+	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, xemaclite_of_match);
+
+static struct platform_driver xemaclite_of_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = xemaclite_of_match,
+	},
+	.probe		= xemaclite_of_probe,
+	.remove		= __devexit_p(xemaclite_of_remove),
+};
+
+/**
+ * xgpiopss_init - Initial driver registration call
+ *
+ * Return:	0 upon success, or a negative error upon failure.
+ */
+static int __init xemaclite_init(void)
+{
+	/* No kernel boot options used, we just need to register the driver */
+	return platform_driver_register(&xemaclite_of_driver);
+}
+
+/**
+ * xemaclite_cleanup - Driver un-registration call
+ */
+static void __exit xemaclite_cleanup(void)
+{
+	platform_driver_unregister(&xemaclite_of_driver);
+}
+
+module_init(xemaclite_init);
+module_exit(xemaclite_cleanup);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver");
+MODULE_LICENSE("GPL");