ixgbe: add support functions to access thermal data

Some 82599 adapters contain thermal data that we can get to via
an i2c interface.  These functions provide support to get at that
data.  A following patch will export this data.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 171 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index e59888163a17..6c6c66eace6c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3604,3 +3604,174 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
 	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 }
+
+static const u8 ixgbe_emc_temp_data[4] = {
+	IXGBE_EMC_INTERNAL_DATA,
+	IXGBE_EMC_DIODE1_DATA,
+	IXGBE_EMC_DIODE2_DATA,
+	IXGBE_EMC_DIODE3_DATA
+};
+static const u8 ixgbe_emc_therm_limit[4] = {
+	IXGBE_EMC_INTERNAL_THERM_LIMIT,
+	IXGBE_EMC_DIODE1_THERM_LIMIT,
+	IXGBE_EMC_DIODE2_THERM_LIMIT,
+	IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  ixgbe_get_ets_data - Extracts the ETS bit data
+ *  @hw: pointer to hardware structure
+ *  @ets_cfg: extected ETS data
+ *  @ets_offset: offset of ETS data
+ *
+ *  Returns error code.
+ **/
+static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg,
+			      u16 *ets_offset)
+{
+	s32 status = 0;
+
+	status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset);
+	if (status)
+		goto out;
+
+	if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg);
+	if (status)
+		goto out;
+
+	if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  num_sensors;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	/* Only support thermal sensors attached to 82599 physical port 0 */
+	if ((hw->mac.type != ixgbe_mac_82599EB) ||
+	     (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+	if (status)
+		goto out;
+
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		u8  sensor_index;
+		u8  sensor_location;
+
+		status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+					     &ets_sensor);
+		if (status)
+			goto out;
+
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+
+		if (sensor_location != 0) {
+			status = hw->phy.ops.read_i2c_byte(hw,
+					ixgbe_emc_temp_data[sensor_index],
+					IXGBE_I2C_THERMAL_SENSOR_ADDR,
+					&data->sensor[i].temp);
+			if (status)
+				goto out;
+		}
+	}
+out:
+	return status;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  low_thresh_delta;
+	u8  num_sensors;
+	u8  therm_limit;
+	u8  i;
+	struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+	/* Only support thermal sensors attached to 82599 physical port 0 */
+	if ((hw->mac.type != ixgbe_mac_82599EB) ||
+	    (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+		status = IXGBE_NOT_IMPLEMENTED;
+		goto out;
+	}
+
+	status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+	if (status)
+		goto out;
+
+	low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+			     IXGBE_ETS_LTHRES_DELTA_SHIFT);
+	num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > IXGBE_MAX_SENSORS)
+		num_sensors = IXGBE_MAX_SENSORS;
+
+	for (i = 0; i < num_sensors; i++) {
+		u8  sensor_index;
+		u8  sensor_location;
+
+		hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
+		sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+				IXGBE_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+				   IXGBE_ETS_DATA_LOC_SHIFT);
+		therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+		hw->phy.ops.write_i2c_byte(hw,
+			ixgbe_emc_therm_limit[sensor_index],
+			IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+		if (sensor_location == 0)
+			continue;
+
+		data->sensor[i].location = sensor_location;
+		data->sensor[i].caution_thresh = therm_limit;
+		data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta;
+	}
+out:
+	return status;
+}
+