summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ezchip
diff options
context:
space:
mode:
authorNoam Camus <noamc@ezchip.com>2015-06-23 11:43:53 +0300
committerDavid S. Miller <davem@davemloft.net>2015-06-23 07:16:25 -0700
commit0dd0770936363ecd4d49192782bceccb882d3a24 (patch)
tree4fabeeacedeacafb30910a5fc4609e7cd0e7dcbf /drivers/net/ethernet/ezchip
parent55dd27536671511317d80478904e4510ed1162a1 (diff)
downloadblackbird-op-linux-0dd0770936363ecd4d49192782bceccb882d3a24.tar.gz
blackbird-op-linux-0dd0770936363ecd4d49192782bceccb882d3a24.zip
NET: Add ezchip ethernet driver
Simple LAN device for debug or management purposes. Device supports interrupts for RX and TX(completion). Device does not have DMA ability. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Tal Zilcer <talz@ezchip.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/ezchip')
-rw-r--r--drivers/net/ethernet/ezchip/Kconfig26
-rw-r--r--drivers/net/ethernet/ezchip/Makefile1
-rw-r--r--drivers/net/ethernet/ezchip/nps_enet.c658
-rw-r--r--drivers/net/ethernet/ezchip/nps_enet.h336
4 files changed, 1021 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig
new file mode 100644
index 000000000000..48ecbc8aaaea
--- /dev/null
+++ b/drivers/net/ethernet/ezchip/Kconfig
@@ -0,0 +1,26 @@
+#
+# EZchip network device configuration
+#
+
+config NET_VENDOR_EZCHIP
+ bool "EZchip devices"
+ default y
+ ---help---
+ If you have a network (Ethernet) device belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about EZchip devices. If you say Y, you will be asked for
+ your specific device in the following questions.
+
+if NET_VENDOR_EZCHIP
+
+config EZCHIP_NPS_MANAGEMENT_ENET
+ tristate "EZchip NPS management enet support"
+ depends on OF_IRQ && OF_NET
+ ---help---
+ Simple LAN device for debug or management purposes.
+ Device supports interrupts for RX and TX(completion).
+ Device does not have DMA ability.
+
+endif
diff --git a/drivers/net/ethernet/ezchip/Makefile b/drivers/net/ethernet/ezchip/Makefile
new file mode 100644
index 000000000000..e490176a8137
--- /dev/null
+++ b/drivers/net/ethernet/ezchip/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_EZCHIP_NPS_MANAGEMENT_ENET) += nps_enet.o
diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
new file mode 100644
index 000000000000..24a85b292007
--- /dev/null
+++ b/drivers/net/ethernet/ezchip/nps_enet.c
@@ -0,0 +1,658 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include "nps_enet.h"
+
+#define DRV_NAME "nps_mgt_enet"
+
+static void nps_enet_clean_rx_fifo(struct net_device *ndev, u32 frame_len)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ u32 i, len = DIV_ROUND_UP(frame_len, sizeof(u32));
+
+ /* Empty Rx FIFO buffer by reading all words */
+ for (i = 0; i < len; i++)
+ nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+}
+
+static void nps_enet_read_rx_fifo(struct net_device *ndev,
+ unsigned char *dst, u32 length)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ s32 i, last = length & (sizeof(u32) - 1);
+ u32 *reg = (u32 *)dst, len = length / sizeof(u32);
+ bool dst_is_aligned = IS_ALIGNED((unsigned long)dst, sizeof(u32));
+
+ /* In case dst is not aligned we need an intermediate buffer */
+ if (dst_is_aligned)
+ for (i = 0; i < len; i++, reg++)
+ *reg = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+ else { /* !dst_is_aligned */
+ for (i = 0; i < len; i++, reg++) {
+ u32 buf =
+ nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+
+ /* to accommodate word-unaligned address of "reg"
+ * we have to do memcpy_toio() instead of simple "=".
+ */
+ memcpy_toio((void __iomem *)reg, &buf, sizeof(buf));
+ }
+ }
+
+ /* copy last bytes (if any) */
+ if (last) {
+ u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF);
+
+ memcpy_toio((void __iomem *)reg, &buf, last);
+ }
+}
+
+static u32 nps_enet_rx_handler(struct net_device *ndev)
+{
+ u32 frame_len, err = 0;
+ u32 work_done = 0;
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct sk_buff *skb;
+ struct nps_enet_rx_ctl rx_ctrl;
+
+ rx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL);
+ frame_len = rx_ctrl.nr;
+
+ /* Check if we got RX */
+ if (!rx_ctrl.cr)
+ return work_done;
+
+ /* If we got here there is a work for us */
+ work_done++;
+
+ /* Check Rx error */
+ if (rx_ctrl.er) {
+ ndev->stats.rx_errors++;
+ err = 1;
+ }
+
+ /* Check Rx CRC error */
+ if (rx_ctrl.crc) {
+ ndev->stats.rx_crc_errors++;
+ ndev->stats.rx_dropped++;
+ err = 1;
+ }
+
+ /* Check Frame length Min 64b */
+ if (unlikely(frame_len < ETH_ZLEN)) {
+ ndev->stats.rx_length_errors++;
+ ndev->stats.rx_dropped++;
+ err = 1;
+ }
+
+ if (err)
+ goto rx_irq_clean;
+
+ /* Skb allocation */
+ skb = netdev_alloc_skb_ip_align(ndev, frame_len);
+ if (unlikely(!skb)) {
+ ndev->stats.rx_errors++;
+ ndev->stats.rx_dropped++;
+ goto rx_irq_clean;
+ }
+
+ /* Copy frame from Rx fifo into the skb */
+ nps_enet_read_rx_fifo(ndev, skb->data, frame_len);
+
+ skb_put(skb, frame_len);
+ skb->protocol = eth_type_trans(skb, ndev);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += frame_len;
+ netif_receive_skb(skb);
+
+ goto rx_irq_frame_done;
+
+rx_irq_clean:
+ /* Clean Rx fifo */
+ nps_enet_clean_rx_fifo(ndev, frame_len);
+
+rx_irq_frame_done:
+ /* Ack Rx ctrl register */
+ nps_enet_reg_set(priv, NPS_ENET_REG_RX_CTL, 0);
+
+ return work_done;
+}
+
+static void nps_enet_tx_handler(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_tx_ctl tx_ctrl;
+
+ tx_ctrl.value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL);
+
+ /* Check if we got TX */
+ if (!priv->tx_packet_sent || tx_ctrl.ct)
+ return;
+
+ /* Check Tx transmit error */
+ if (unlikely(tx_ctrl.et)) {
+ ndev->stats.tx_errors++;
+ } else {
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += tx_ctrl.nt;
+ }
+
+ if (priv->tx_skb) {
+ dev_kfree_skb(priv->tx_skb);
+ priv->tx_skb = NULL;
+ }
+
+ priv->tx_packet_sent = false;
+
+ if (netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+}
+
+/**
+ * nps_enet_poll - NAPI poll handler.
+ * @napi: Pointer to napi_struct structure.
+ * @budget: How many frames to process on one call.
+ *
+ * returns: Number of processed frames
+ */
+static int nps_enet_poll(struct napi_struct *napi, int budget)
+{
+ struct net_device *ndev = napi->dev;
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_buf_int_enable buf_int_enable;
+ u32 work_done;
+
+ buf_int_enable.rx_rdy = NPS_ENET_ENABLE;
+ buf_int_enable.tx_done = NPS_ENET_ENABLE;
+ nps_enet_tx_handler(ndev);
+ work_done = nps_enet_rx_handler(ndev);
+ if (work_done < budget) {
+ napi_complete(napi);
+ nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE,
+ buf_int_enable.value);
+ }
+
+ return work_done;
+}
+
+/**
+ * nps_enet_irq_handler - Global interrupt handler for ENET.
+ * @irq: irq number.
+ * @dev_instance: device instance.
+ *
+ * returns: IRQ_HANDLED for all cases.
+ *
+ * EZchip ENET has 2 interrupt causes, and depending on bits raised in
+ * CTRL registers we may tell what is a reason for interrupt to fire up.
+ * We got one for RX and the other for TX (completion).
+ */
+static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance)
+{
+ struct net_device *ndev = dev_instance;
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_buf_int_cause buf_int_cause;
+
+ buf_int_cause.value =
+ nps_enet_reg_get(priv, NPS_ENET_REG_BUF_INT_CAUSE);
+
+ if (buf_int_cause.tx_done || buf_int_cause.rx_rdy)
+ if (likely(napi_schedule_prep(&priv->napi))) {
+ nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
+ __napi_schedule(&priv->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void nps_enet_set_hw_mac_address(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_ge_mac_cfg_1 ge_mac_cfg_1;
+ struct nps_enet_ge_mac_cfg_2 *ge_mac_cfg_2 = &priv->ge_mac_cfg_2;
+
+ /* set MAC address in HW */
+ ge_mac_cfg_1.octet_0 = ndev->dev_addr[0];
+ ge_mac_cfg_1.octet_1 = ndev->dev_addr[1];
+ ge_mac_cfg_1.octet_2 = ndev->dev_addr[2];
+ ge_mac_cfg_1.octet_3 = ndev->dev_addr[3];
+ ge_mac_cfg_2->octet_4 = ndev->dev_addr[4];
+ ge_mac_cfg_2->octet_5 = ndev->dev_addr[5];
+
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_1,
+ ge_mac_cfg_1.value);
+
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2,
+ ge_mac_cfg_2->value);
+}
+
+/**
+ * nps_enet_hw_reset - Reset the network device.
+ * @ndev: Pointer to the network device.
+ *
+ * This function reset the PCS and TX fifo.
+ * The programming model is to set the relevant reset bits
+ * wait for some time for this to propagate and then unset
+ * the reset bits. This way we ensure that reset procedure
+ * is done successfully by device.
+ */
+static void nps_enet_hw_reset(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_ge_rst ge_rst;
+ struct nps_enet_phase_fifo_ctl phase_fifo_ctl;
+
+ ge_rst.value = 0;
+ phase_fifo_ctl.value = 0;
+ /* Pcs reset sequence*/
+ ge_rst.gmac_0 = NPS_ENET_ENABLE;
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst.value);
+ usleep_range(10, 20);
+ ge_rst.value = 0;
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst.value);
+
+ /* Tx fifo reset sequence */
+ phase_fifo_ctl.rst = NPS_ENET_ENABLE;
+ phase_fifo_ctl.init = NPS_ENET_ENABLE;
+ nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL,
+ phase_fifo_ctl.value);
+ usleep_range(10, 20);
+ phase_fifo_ctl.value = 0;
+ nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL,
+ phase_fifo_ctl.value);
+}
+
+static void nps_enet_hw_enable_control(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_ge_mac_cfg_0 ge_mac_cfg_0;
+ struct nps_enet_buf_int_enable buf_int_enable;
+ struct nps_enet_ge_mac_cfg_2 *ge_mac_cfg_2 = &priv->ge_mac_cfg_2;
+ struct nps_enet_ge_mac_cfg_3 *ge_mac_cfg_3 = &priv->ge_mac_cfg_3;
+ s32 max_frame_length;
+
+ ge_mac_cfg_0.value = 0;
+ buf_int_enable.value = 0;
+ /* Enable Rx and Tx statistics */
+ ge_mac_cfg_2->stat_en = NPS_ENET_GE_MAC_CFG_2_STAT_EN;
+
+ /* Discard packets with different MAC address */
+ ge_mac_cfg_2->disc_da = NPS_ENET_ENABLE;
+
+ /* Discard multicast packets */
+ ge_mac_cfg_2->disc_mc = NPS_ENET_ENABLE;
+
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2,
+ ge_mac_cfg_2->value);
+
+ /* Discard Packets bigger than max frame length */
+ max_frame_length = ETH_HLEN + ndev->mtu + ETH_FCS_LEN;
+ if (max_frame_length <= NPS_ENET_MAX_FRAME_LENGTH) {
+ ge_mac_cfg_3->max_len = max_frame_length;
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_3,
+ ge_mac_cfg_3->value);
+ }
+
+ /* Enable interrupts */
+ buf_int_enable.rx_rdy = NPS_ENET_ENABLE;
+ buf_int_enable.tx_done = NPS_ENET_ENABLE;
+ nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE,
+ buf_int_enable.value);
+
+ /* Write device MAC address to HW */
+ nps_enet_set_hw_mac_address(ndev);
+
+ /* Rx and Tx HW features */
+ ge_mac_cfg_0.tx_pad_en = NPS_ENET_ENABLE;
+ ge_mac_cfg_0.tx_crc_en = NPS_ENET_ENABLE;
+ ge_mac_cfg_0.rx_crc_strip = NPS_ENET_ENABLE;
+
+ /* IFG configuration */
+ ge_mac_cfg_0.rx_ifg = NPS_ENET_GE_MAC_CFG_0_RX_IFG;
+ ge_mac_cfg_0.tx_ifg = NPS_ENET_GE_MAC_CFG_0_TX_IFG;
+
+ /* preamble configuration */
+ ge_mac_cfg_0.rx_pr_check_en = NPS_ENET_ENABLE;
+ ge_mac_cfg_0.tx_pr_len = NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN;
+
+ /* enable flow control frames */
+ ge_mac_cfg_0.tx_fc_en = NPS_ENET_ENABLE;
+ ge_mac_cfg_0.rx_fc_en = NPS_ENET_ENABLE;
+ ge_mac_cfg_0.tx_fc_retr = NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR;
+
+ /* Enable Rx and Tx */
+ ge_mac_cfg_0.rx_en = NPS_ENET_ENABLE;
+ ge_mac_cfg_0.tx_en = NPS_ENET_ENABLE;
+
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0,
+ ge_mac_cfg_0.value);
+}
+
+static void nps_enet_hw_disable_control(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+
+ /* Disable interrupts */
+ nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
+
+ /* Disable Rx and Tx */
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, 0);
+}
+
+static void nps_enet_send_frame(struct net_device *ndev,
+ struct sk_buff *skb)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_tx_ctl tx_ctrl;
+ short length = skb->len;
+ u32 i, len = DIV_ROUND_UP(length, sizeof(u32));
+ u32 *src = (u32 *)virt_to_phys(skb->data);
+ bool src_is_aligned = IS_ALIGNED((unsigned long)src, sizeof(u32));
+
+ tx_ctrl.value = 0;
+ /* In case src is not aligned we need an intermediate buffer */
+ if (src_is_aligned)
+ for (i = 0; i < len; i++, src++)
+ nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, *src);
+ else { /* !src_is_aligned */
+ for (i = 0; i < len; i++, src++) {
+ u32 buf;
+
+ /* to accommodate word-unaligned address of "src"
+ * we have to do memcpy_fromio() instead of simple "="
+ */
+ memcpy_fromio(&buf, (void __iomem *)src, sizeof(buf));
+ nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, buf);
+ }
+ }
+ /* Write the length of the Frame */
+ tx_ctrl.nt = length;
+
+ /* Indicate SW is done */
+ priv->tx_packet_sent = true;
+ tx_ctrl.ct = NPS_ENET_ENABLE;
+
+ /* Send Frame */
+ nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl.value);
+}
+
+/**
+ * nps_enet_set_mac_address - Set the MAC address for this device.
+ * @ndev: Pointer to net_device structure.
+ * @p: 6 byte Address to be written as MAC address.
+ *
+ * This function copies the HW address from the sockaddr structure to the
+ * net_device structure and updates the address in HW.
+ *
+ * returns: -EBUSY if the net device is busy or 0 if the address is set
+ * successfully.
+ */
+static s32 nps_enet_set_mac_address(struct net_device *ndev, void *p)
+{
+ struct sockaddr *addr = p;
+ s32 res;
+
+ if (netif_running(ndev))
+ return -EBUSY;
+
+ res = eth_mac_addr(ndev, p);
+ if (!res) {
+ ether_addr_copy(ndev->dev_addr, addr->sa_data);
+ nps_enet_set_hw_mac_address(ndev);
+ }
+
+ return res;
+}
+
+/**
+ * nps_enet_set_rx_mode - Change the receive filtering mode.
+ * @ndev: Pointer to the network device.
+ *
+ * This function enables/disables promiscuous mode
+ */
+static void nps_enet_set_rx_mode(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ struct nps_enet_ge_mac_cfg_2 ge_mac_cfg_2;
+
+ ge_mac_cfg_2.value = priv->ge_mac_cfg_2.value;
+
+ if (ndev->flags & IFF_PROMISC) {
+ ge_mac_cfg_2.disc_da = NPS_ENET_DISABLE;
+ ge_mac_cfg_2.disc_mc = NPS_ENET_DISABLE;
+ } else {
+ ge_mac_cfg_2.disc_da = NPS_ENET_ENABLE;
+ ge_mac_cfg_2.disc_mc = NPS_ENET_ENABLE;
+ }
+
+ nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, ge_mac_cfg_2.value);
+}
+
+/**
+ * nps_enet_open - Open the network device.
+ * @ndev: Pointer to the network device.
+ *
+ * returns: 0, on success or non-zero error value on failure.
+ *
+ * This function sets the MAC address, requests and enables an IRQ
+ * for the ENET device and starts the Tx queue.
+ */
+static s32 nps_enet_open(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+ s32 err;
+
+ /* Reset private variables */
+ priv->tx_packet_sent = false;
+ priv->ge_mac_cfg_2.value = 0;
+ priv->ge_mac_cfg_3.value = 0;
+
+ /* ge_mac_cfg_3 default values */
+ priv->ge_mac_cfg_3.rx_ifg_th = NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH;
+ priv->ge_mac_cfg_3.max_len = NPS_ENET_GE_MAC_CFG_3_MAX_LEN;
+
+ /* Disable HW device */
+ nps_enet_hw_disable_control(ndev);
+
+ /* irq Rx allocation */
+ err = request_irq(priv->irq, nps_enet_irq_handler,
+ 0, "enet-rx-tx", ndev);
+ if (err)
+ return err;
+
+ napi_enable(&priv->napi);
+
+ /* Enable HW device */
+ nps_enet_hw_reset(ndev);
+ nps_enet_hw_enable_control(ndev);
+
+ netif_start_queue(ndev);
+
+ return 0;
+}
+
+/**
+ * nps_enet_stop - Close the network device.
+ * @ndev: Pointer to the network device.
+ *
+ * This function stops the Tx queue, disables interrupts for the ENET device.
+ */
+static s32 nps_enet_stop(struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+
+ napi_disable(&priv->napi);
+ netif_stop_queue(ndev);
+ nps_enet_hw_disable_control(ndev);
+ free_irq(priv->irq, ndev);
+
+ return 0;
+}
+
+/**
+ * nps_enet_start_xmit - Starts the data transmission.
+ * @skb: sk_buff pointer that contains data to be Transmitted.
+ * @ndev: Pointer to net_device structure.
+ *
+ * returns: NETDEV_TX_OK, on success
+ * NETDEV_TX_BUSY, if any of the descriptors are not free.
+ *
+ * This function is invoked from upper layers to initiate transmission.
+ */
+static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
+{
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+
+ /* This driver handles one frame at a time */
+ netif_stop_queue(ndev);
+
+ nps_enet_send_frame(ndev, skb);
+
+ priv->tx_skb = skb;
+
+ return NETDEV_TX_OK;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void nps_enet_poll_controller(struct net_device *ndev)
+{
+ disable_irq(ndev->irq);
+ nps_enet_irq_handler(ndev->irq, ndev);
+ enable_irq(ndev->irq);
+}
+#endif
+
+static const struct net_device_ops nps_netdev_ops = {
+ .ndo_open = nps_enet_open,
+ .ndo_stop = nps_enet_stop,
+ .ndo_start_xmit = nps_enet_start_xmit,
+ .ndo_set_mac_address = nps_enet_set_mac_address,
+ .ndo_set_rx_mode = nps_enet_set_rx_mode,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = nps_enet_poll_controller,
+#endif
+};
+
+static s32 nps_enet_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct net_device *ndev;
+ struct nps_enet_priv *priv;
+ s32 err = 0;
+ const char *mac_addr;
+ struct resource *res_regs;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ ndev = alloc_etherdev(sizeof(struct nps_enet_priv));
+ if (!ndev)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ndev);
+ SET_NETDEV_DEV(ndev, dev);
+ priv = netdev_priv(ndev);
+
+ /* The EZ NET specific entries in the device structure. */
+ ndev->netdev_ops = &nps_netdev_ops;
+ ndev->watchdog_timeo = (400 * HZ / 1000);
+ /* FIXME :: no multicast support yet */
+ ndev->flags &= ~IFF_MULTICAST;
+
+ res_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs_base = devm_ioremap_resource(dev, res_regs);
+ if (IS_ERR(priv->regs_base)) {
+ err = PTR_ERR(priv->regs_base);
+ goto out_netdev;
+ }
+ dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base);
+
+ /* set kernel MAC address to dev */
+ mac_addr = of_get_mac_address(dev->of_node);
+ if (mac_addr)
+ ether_addr_copy(ndev->dev_addr, mac_addr);
+ else
+ eth_hw_addr_random(ndev);
+
+ /* Get IRQ number */
+ priv->irq = platform_get_irq(pdev, 0);
+ if (!priv->irq) {
+ dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
+ err = -ENODEV;
+ goto out_netdev;
+ }
+
+ netif_napi_add(ndev, &priv->napi, nps_enet_poll,
+ NPS_ENET_NAPI_POLL_WEIGHT);
+
+ /* Register the driver. Should be the last thing in probe */
+ err = register_netdev(ndev);
+ if (err) {
+ dev_err(dev, "Failed to register ndev for %s, err = 0x%08x\n",
+ ndev->name, (s32)err);
+ goto out_netif_api;
+ }
+
+ dev_info(dev, "(rx/tx=%d)\n", priv->irq);
+ return 0;
+
+out_netif_api:
+ netif_napi_del(&priv->napi);
+out_netdev:
+ if (err)
+ free_netdev(ndev);
+
+ return err;
+}
+
+static s32 nps_enet_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct nps_enet_priv *priv = netdev_priv(ndev);
+
+ unregister_netdev(ndev);
+ free_netdev(ndev);
+ netif_napi_del(&priv->napi);
+
+ return 0;
+}
+
+static const struct of_device_id nps_enet_dt_ids[] = {
+ { .compatible = "ezchip,nps-mgt-enet" },
+ { /* Sentinel */ }
+};
+
+static struct platform_driver nps_enet_driver = {
+ .probe = nps_enet_probe,
+ .remove = nps_enet_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = nps_enet_dt_ids,
+ },
+};
+
+module_platform_driver(nps_enet_driver);
+
+MODULE_AUTHOR("EZchip Semiconductor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/ezchip/nps_enet.h b/drivers/net/ethernet/ezchip/nps_enet.h
new file mode 100644
index 000000000000..fc45c9daa1c2
--- /dev/null
+++ b/drivers/net/ethernet/ezchip/nps_enet.h
@@ -0,0 +1,336 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#ifndef _NPS_ENET_H
+#define _NPS_ENET_H
+
+/* default values */
+#define NPS_ENET_NAPI_POLL_WEIGHT 0x2
+#define NPS_ENET_MAX_FRAME_LENGTH 0x3FFF
+#define NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR 0x7
+#define NPS_ENET_GE_MAC_CFG_0_RX_IFG 0x5
+#define NPS_ENET_GE_MAC_CFG_0_TX_IFG 0xC
+#define NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN 0x7
+#define NPS_ENET_GE_MAC_CFG_2_STAT_EN 0x3
+#define NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH 0x14
+#define NPS_ENET_GE_MAC_CFG_3_MAX_LEN 0x3FFC
+#define NPS_ENET_ENABLE 1
+#define NPS_ENET_DISABLE 0
+
+/* register definitions */
+#define NPS_ENET_REG_TX_CTL 0x800
+#define NPS_ENET_REG_TX_BUF 0x808
+#define NPS_ENET_REG_RX_CTL 0x810
+#define NPS_ENET_REG_RX_BUF 0x818
+#define NPS_ENET_REG_BUF_INT_ENABLE 0x8C0
+#define NPS_ENET_REG_BUF_INT_CAUSE 0x8C4
+#define NPS_ENET_REG_GE_MAC_CFG_0 0x1000
+#define NPS_ENET_REG_GE_MAC_CFG_1 0x1004
+#define NPS_ENET_REG_GE_MAC_CFG_2 0x1008
+#define NPS_ENET_REG_GE_MAC_CFG_3 0x100C
+#define NPS_ENET_REG_GE_RST 0x1400
+#define NPS_ENET_REG_PHASE_FIFO_CTL 0x1404
+
+/* Tx control register */
+struct nps_enet_tx_ctl {
+ union {
+ /* ct: SW sets to indicate frame ready in Tx buffer for
+ * transmission. HW resets to when transmission done
+ * et: Transmit error
+ * nt: Length in bytes of Tx frame loaded to Tx buffer
+ */
+ struct {
+ u32
+ __reserved_1:16,
+ ct:1,
+ et:1,
+ __reserved_2:3,
+ nt:11;
+ };
+
+ u32 value;
+ };
+};
+
+/* Rx control register */
+struct nps_enet_rx_ctl {
+ union {
+ /* cr: HW sets to indicate frame ready in Rx buffer.
+ * SW resets to indicate host read received frame
+ * and new frames can be written to Rx buffer
+ * er: Rx error indication
+ * crc: Rx CRC error indication
+ * nr: Length in bytes of Rx frame loaded by MAC to Rx buffer
+ */
+ struct {
+ u32
+ __reserved_1:16,
+ cr:1,
+ er:1,
+ crc:1,
+ __reserved_2:2,
+ nr:11;
+ };
+
+ u32 value;
+ };
+};
+
+/* Interrupt enable for data buffer events register */
+struct nps_enet_buf_int_enable {
+ union {
+ /* tx_done: Interrupt generation in the case when new frame
+ * is ready in Rx buffer
+ * rx_rdy: Interrupt generation in the case when current frame
+ * was read from TX buffer
+ */
+ struct {
+ u32
+ __reserved:30,
+ tx_done:1,
+ rx_rdy:1;
+ };
+
+ u32 value;
+ };
+};
+
+/* Interrupt cause for data buffer events register */
+struct nps_enet_buf_int_cause {
+ union {
+ /* tx_done: Interrupt in the case when current frame was
+ * read from TX buffer.
+ * rx_rdy: Interrupt in the case when new frame is ready
+ * in RX buffer.
+ */
+ struct {
+ u32
+ __reserved:30,
+ tx_done:1,
+ rx_rdy:1;
+ };
+
+ u32 value;
+ };
+};
+
+/* Gbps Eth MAC Configuration 0 register */
+struct nps_enet_ge_mac_cfg_0 {
+ union {
+ /* tx_pr_len: Transmit preamble length in bytes
+ * tx_ifg_nib: Tx idle pattern
+ * nib_mode: Nibble (4-bit) Mode
+ * rx_pr_check_en: Receive preamble Check Enable
+ * tx_ifg: Transmit inter-Frame Gap
+ * rx_ifg: Receive inter-Frame Gap
+ * tx_fc_retr: Transmit Flow Control Retransmit Mode
+ * rx_length_check_en: Receive Length Check Enable
+ * rx_crc_ignore: Results of the CRC check are ignored
+ * rx_crc_strip: MAC strips the CRC from received frames
+ * rx_fc_en: Receive Flow Control Enable
+ * tx_crc_en: Transmit CRC Enabled
+ * tx_pad_en: Transmit Padding Enable
+ * tx_cf_en: Transmit Flow Control Enable
+ * tx_en: Transmit Enable
+ * rx_en: Receive Enable
+ */
+ struct {
+ u32
+ tx_pr_len:4,
+ tx_ifg_nib:4,
+ nib_mode:1,
+ rx_pr_check_en:1,
+ tx_ifg:6,
+ rx_ifg:4,
+ tx_fc_retr:3,
+ rx_length_check_en:1,
+ rx_crc_ignore:1,
+ rx_crc_strip:1,
+ rx_fc_en:1,
+ tx_crc_en:1,
+ tx_pad_en:1,
+ tx_fc_en:1,
+ tx_en:1,
+ rx_en:1;
+ };
+
+ u32 value;
+ };
+};
+
+/* Gbps Eth MAC Configuration 1 register */
+struct nps_enet_ge_mac_cfg_1 {
+ union {
+ /* octet_3: MAC address octet 3
+ * octet_2: MAC address octet 2
+ * octet_1: MAC address octet 1
+ * octet_0: MAC address octet 0
+ */
+ struct {
+ u32
+ octet_3:8,
+ octet_2:8,
+ octet_1:8,
+ octet_0:8;
+ };
+
+ u32 value;
+ };
+};
+
+/* Gbps Eth MAC Configuration 2 register */
+struct nps_enet_ge_mac_cfg_2 {
+ union {
+ /* transmit_flush_en: MAC flush enable
+ * stat_en: RMON statistics interface enable
+ * disc_da: Discard frames with DA different
+ * from MAC address
+ * disc_bc: Discard broadcast frames
+ * disc_mc: Discard multicast frames
+ * octet_5: MAC address octet 5
+ * octet_4: MAC address octet 4
+ */
+ struct {
+ u32
+ transmit_flush_en:1,
+ __reserved_1:5,
+ stat_en:2,
+ __reserved_2:1,
+ disc_da:1,
+ disc_bc:1,
+ disc_mc:1,
+ __reserved_3:4,
+ octet_5:8,
+ octet_4:8;
+ };
+
+ u32 value;
+ };
+};
+
+/* Gbps Eth MAC Configuration 3 register */
+struct nps_enet_ge_mac_cfg_3 {
+ union {
+ /* ext_oob_cbfc_sel: Selects one of the 4 profiles for
+ * extended OOB in-flow-control indication
+ * max_len: Maximum receive frame length in bytes
+ * tx_cbfc_en: Enable transmission of class-based
+ * flow control packets
+ * rx_ifg_th: Threshold for IFG status reporting via OOB
+ * cf_timeout: Configurable time to decrement FC counters
+ * cf_drop: Drop control frames
+ * redirect_cbfc_sel: Selects one of CBFC redirect profiles
+ * rx_cbfc_redir_en: Enable Rx class-based flow
+ * control redirect
+ * rx_cbfc_en: Enable Rx class-based flow control
+ * tm_hd_mode: TM header mode
+ */
+ struct {
+ u32
+ ext_oob_cbfc_sel:2,
+ max_len:14,
+ tx_cbfc_en:1,
+ rx_ifg_th:5,
+ cf_timeout:4,
+ cf_drop:1,
+ redirect_cbfc_sel:2,
+ rx_cbfc_redir_en:1,
+ rx_cbfc_en:1,
+ tm_hd_mode:1;
+ };
+
+ u32 value;
+ };
+};
+
+/* GE MAC, PCS reset control register */
+struct nps_enet_ge_rst {
+ union {
+ /* gmac_0: GE MAC reset
+ * spcs_0: SGMII PCS reset
+ */
+ struct {
+ u32
+ __reserved_1:23,
+ gmac_0:1,
+ __reserved_2:7,
+ spcs_0:1;
+ };
+
+ u32 value;
+ };
+};
+
+/* Tx phase sync FIFO control register */
+struct nps_enet_phase_fifo_ctl {
+ union {
+ /* init: initialize serdes TX phase sync FIFO pointers
+ * rst: reset serdes TX phase sync FIFO
+ */
+ struct {
+ u32
+ __reserved:30,
+ init:1,
+ rst:1;
+ };
+
+ u32 value;
+ };
+};
+
+/**
+ * struct nps_enet_priv - Storage of ENET's private information.
+ * @regs_base: Base address of ENET memory-mapped control registers.
+ * @irq: For RX/TX IRQ number.
+ * @tx_packet_sent: SW indication if frame is being sent.
+ * @tx_skb: socket buffer of sent frame.
+ * @napi: Structure for NAPI.
+ */
+struct nps_enet_priv {
+ void __iomem *regs_base;
+ s32 irq;
+ bool tx_packet_sent;
+ struct sk_buff *tx_skb;
+ struct napi_struct napi;
+ struct nps_enet_ge_mac_cfg_2 ge_mac_cfg_2;
+ struct nps_enet_ge_mac_cfg_3 ge_mac_cfg_3;
+};
+
+/**
+ * nps_reg_set - Sets ENET register with provided value.
+ * @priv: Pointer to EZchip ENET private data structure.
+ * @reg: Register offset from base address.
+ * @value: Value to set in register.
+ */
+static inline void nps_enet_reg_set(struct nps_enet_priv *priv,
+ s32 reg, s32 value)
+{
+ iowrite32be(value, priv->regs_base + reg);
+}
+
+/**
+ * nps_reg_get - Gets value of specified ENET register.
+ * @priv: Pointer to EZchip ENET private data structure.
+ * @reg: Register offset from base address.
+ *
+ * returns: Value of requested register.
+ */
+static inline u32 nps_enet_reg_get(struct nps_enet_priv *priv, s32 reg)
+{
+ return ioread32be(priv->regs_base + reg);
+}
+
+#endif /* _NPS_ENET_H */
OpenPOWER on IntegriCloud