Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

22 files changed, 23601 insertions, 0 deletions

diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig
new file mode 100644
index 000000000000..37940279ded8
--- /dev/null
+++ b/drivers/net/ethernet/dec/Kconfig
@@ -0,0 +1,37 @@
+#
+# Digital Equipment Inc network device configuration
+#
+
+config NET_VENDOR_DEC
+	bool "Digital Equipment devices"
+	default y
+	depends on PCI || EISA || CARDBUS
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about DEC cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_DEC
+
+config EWRK3
+	tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+	depends on ISA
+	select CRC32
+	---help---
+	  This driver supports the DE203, DE204 and DE205 network (Ethernet)
+	  cards. If this is for you, say Y and read
+	  <file:Documentation/networking/ewrk3.txt> in the kernel source as
+	  well as the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ewrk3.
+
+source "drivers/net/ethernet/dec/tulip/Kconfig"
+
+endif # NET_VENDOR_DEC
diff --git a/drivers/net/ethernet/dec/Makefile b/drivers/net/ethernet/dec/Makefile
new file mode 100644
index 000000000000..1b01ed8d42c8
--- /dev/null
+++ b/drivers/net/ethernet/dec/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Digital Equipment Inc. network device drivers.
+#
+
+obj-$(CONFIG_EWRK3) += ewrk3.o
+obj-$(CONFIG_NET_TULIP) += tulip/
diff --git a/drivers/net/ethernet/dec/ewrk3.c b/drivers/net/ethernet/dec/ewrk3.c
new file mode 100644
index 000000000000..f9df5e4d0341
--- /dev/null
+++ b/drivers/net/ethernet/dec/ewrk3.c
@@ -0,0 +1,1959 @@
+/*  ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux.
+
+   Written 1994 by David C. Davies.
+
+   Copyright 1994 Digital Equipment Corporation.
+
+   This software may be used and distributed according to the terms of
+   the GNU General Public License, incorporated herein by reference.
+
+   This driver is written for the Digital Equipment Corporation series
+   of EtherWORKS ethernet cards:
+
+   DE203 Turbo (BNC)
+   DE204 Turbo (TP)
+   DE205 Turbo (TP BNC)
+
+   The driver has been tested on a relatively busy  network using the DE205
+   card and benchmarked with 'ttcp': it transferred 16M  of data at 975kB/s
+   (7.8Mb/s) to a DECstation 5000/200.
+
+   The author may be reached at davies@maniac.ultranet.com.
+
+   =========================================================================
+   This driver has been written  substantially  from scratch, although  its
+   inheritance of style and stack interface from 'depca.c' and in turn from
+   Donald Becker's 'lance.c' should be obvious.
+
+   The  DE203/4/5 boards  all  use a new proprietary   chip in place of the
+   LANCE chip used in prior cards  (DEPCA, DE100, DE200/1/2, DE210, DE422).
+   Use the depca.c driver in the standard distribution  for the LANCE based
+   cards from DIGITAL; this driver will not work with them.
+
+   The DE203/4/5 cards have 2  main modes: shared memory  and I/O only. I/O
+   only makes  all the card accesses through  I/O transactions and  no high
+   (shared)  memory is used. This  mode provides a >48% performance penalty
+   and  is deprecated in this  driver,  although allowed to provide initial
+   setup when hardstrapped.
+
+   The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is
+   no point in using any mode other than the 2kB  mode - their performances
+   are virtually identical, although the driver has  been tested in the 2kB
+   and 32kB modes. I would suggest you uncomment the line:
+
+   FORCE_2K_MODE;
+
+   to allow the driver to configure the card as a  2kB card at your current
+   base  address, thus leaving more  room to clutter  your  system box with
+   other memory hungry boards.
+
+   As many ISA  and EISA cards  can be supported  under this driver  as you
+   wish, limited primarily  by the available IRQ lines,  rather than by the
+   available I/O addresses  (24 ISA,  16 EISA).   I have  checked different
+   configurations of  multiple  depca cards and  ewrk3 cards  and have  not
+   found a problem yet (provided you have at least depca.c v0.38) ...
+
+   The board IRQ setting   must be at  an unused  IRQ which is  auto-probed
+   using  Donald  Becker's autoprobe  routines.   All  these cards   are at
+   {5,10,11,15}.
+
+   No 16MB memory  limitation should exist with this  driver as DMA is  not
+   used and the common memory area is in low memory on the network card (my
+   current system has 20MB and I've not had problems yet).
+
+   The ability to load  this driver as a  loadable module has been included
+   and used  extensively during the  driver development (to save those long
+   reboot sequences). To utilise this ability, you have to do 8 things:
+
+   0) have a copy of the loadable modules code installed on your system.
+   1) copy ewrk3.c from the  /linux/drivers/net directory to your favourite
+   temporary directory.
+   2) edit the  source code near  line 1898 to reflect  the I/O address and
+   IRQ you're using.
+   3) compile  ewrk3.c, but include -DMODULE in  the command line to ensure
+   that the correct bits are compiled (see end of source code).
+   4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
+   kernel with the ewrk3 configuration turned off and reboot.
+   5) insmod ewrk3.o
+   [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
+   [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards]
+   6) run the net startup bits for your new eth?? interface manually
+   (usually /etc/rc.inet[12] at boot time).
+   7) enjoy!
+
+   Note that autoprobing is not allowed in loadable modules - the system is
+   already up and running and you're messing with interrupts.
+
+   To unload a module, turn off the associated interface
+   'ifconfig eth?? down' then 'rmmod ewrk3'.
+
+   Promiscuous   mode has been  turned  off  in this driver,   but  all the
+   multicast  address bits  have been   turned on. This  improved the  send
+   performance on a busy network by about 13%.
+
+   Ioctl's have now been provided (primarily because  I wanted to grab some
+   packet size statistics). They  are patterned after 'plipconfig.c' from a
+   suggestion by Alan Cox.  Using these  ioctls, you can enable promiscuous
+   mode, add/delete multicast  addresses, change the hardware address,  get
+   packet size distribution statistics and muck around with the control and
+   status register. I'll add others if and when the need arises.
+
+   TO DO:
+   ------
+
+
+   Revision History
+   ----------------
+
+   Version   Date        Description
+
+   0.1     26-aug-94   Initial writing. ALPHA code release.
+   0.11    31-aug-94   Fixed: 2k mode memory base calc.,
+   LeMAC version calc.,
+   IRQ vector assignments during autoprobe.
+   0.12    31-aug-94   Tested working on LeMAC2 (DE20[345]-AC) card.
+   Fixed up MCA hash table algorithm.
+   0.20     4-sep-94   Added IOCTL functionality.
+   0.21    14-sep-94   Added I/O mode.
+   0.21axp 15-sep-94   Special version for ALPHA AXP Linux V1.0.
+   0.22    16-sep-94   Added more IOCTLs & tidied up.
+   0.23    21-sep-94   Added transmit cut through.
+   0.24    31-oct-94   Added uid checks in some ioctls.
+   0.30     1-nov-94   BETA code release.
+   0.31     5-dec-94   Added check/allocate region code.
+   0.32    16-jan-95   Broadcast packet fix.
+   0.33    10-Feb-95   Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+   0.40    27-Dec-95   Rationalise MODULE and autoprobe code.
+   Rewrite for portability & updated.
+   ALPHA support from <jestabro@amt.tay1.dec.com>
+   Added verify_area() calls in ewrk3_ioctl() from
+   suggestion by <heiko@colossus.escape.de>.
+   Add new multicasting code.
+   0.41    20-Jan-96   Fix IRQ set up problem reported by
+   <kenneth@bbs.sas.ntu.ac.sg>.
+   0.42    22-Apr-96   Fix alloc_device() bug <jari@markkus2.fimr.fi>
+   0.43    16-Aug-96   Update alloc_device() to conform to de4x5.c
+   0.44    08-Nov-01   use library crc32 functions <Matt_Domsch@dell.com>
+   0.45    19-Jul-02   fix unaligned access on alpha <martin@bruli.net>
+   0.46    10-Oct-02   Multiple NIC support when module <akropel1@rochester.rr.com>
+   0.47    18-Oct-02   ethtool support <akropel1@rochester.rr.com>
+   0.48    18-Oct-02   cli/sti removal for 2.5 <vda@port.imtp.ilyichevsk.odessa.ua>
+   ioctl locking, signature search cleanup <akropel1@rochester.rr.com>
+
+   =========================================================================
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+#include <linux/ctype.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#include "ewrk3.h"
+
+#define DRV_NAME	"ewrk3"
+#define DRV_VERSION	"0.48"
+
+static char version[] __initdata =
+DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n";
+
+#ifdef EWRK3_DEBUG
+static int ewrk3_debug = EWRK3_DEBUG;
+#else
+static int ewrk3_debug = 1;
+#endif
+
+#define EWRK3_NDA 0xffe0	/* No Device Address */
+
+#define PROBE_LENGTH    32
+#define ETH_PROM_SIG    0xAA5500FFUL
+
+#ifndef EWRK3_SIGNATURE
+#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""}
+#define EWRK3_STRLEN 8
+#endif
+
+#ifndef EWRK3_RAM_BASE_ADDRESSES
+#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000}
+#endif
+
+/*
+   ** Sets up the I/O area for the autoprobe.
+ */
+#define EWRK3_IO_BASE 0x100	/* Start address for probe search */
+#define EWRK3_IOP_INC 0x20	/* I/O address increment */
+#define EWRK3_TOTAL_SIZE 0x20	/* required I/O address length */
+
+#ifndef MAX_NUM_EWRK3S
+#define MAX_NUM_EWRK3S 21
+#endif
+
+#ifndef EWRK3_EISA_IO_PORTS
+#define EWRK3_EISA_IO_PORTS 0x0c00	/* I/O port base address, slot 0 */
+#endif
+
+#ifndef MAX_EISA_SLOTS
+#define MAX_EISA_SLOTS 16
+#define EISA_SLOT_INC 0x1000
+#endif
+
+#define QUEUE_PKT_TIMEOUT (1*HZ)	/* Jiffies */
+
+/*
+   ** EtherWORKS 3 shared memory window sizes
+ */
+#define IO_ONLY         0x00
+#define SHMEM_2K        0x800
+#define SHMEM_32K       0x8000
+#define SHMEM_64K       0x10000
+
+/*
+   ** EtherWORKS 3 IRQ ENABLE/DISABLE
+ */
+#define ENABLE_IRQs { \
+  icr |= lp->irq_mask;\
+  outb(icr, EWRK3_ICR);                     /* Enable the IRQs */\
+}
+
+#define DISABLE_IRQs { \
+  icr = inb(EWRK3_ICR);\
+  icr &= ~lp->irq_mask;\
+  outb(icr, EWRK3_ICR);                     /* Disable the IRQs */\
+}
+
+/*
+   ** EtherWORKS 3 START/STOP
+ */
+#define START_EWRK3 { \
+  csr = inb(EWRK3_CSR);\
+  csr &= ~(CSR_TXD|CSR_RXD);\
+  outb(csr, EWRK3_CSR);                     /* Enable the TX and/or RX */\
+}
+
+#define STOP_EWRK3 { \
+  csr = (CSR_TXD|CSR_RXD);\
+  outb(csr, EWRK3_CSR);                     /* Disable the TX and/or RX */\
+}
+
+/*
+   ** The EtherWORKS 3 private structure
+ */
+#define EWRK3_PKT_STAT_SZ 16
+#define EWRK3_PKT_BIN_SZ  128	/* Should be >=100 unless you
+				   increase EWRK3_PKT_STAT_SZ */
+
+struct ewrk3_stats {
+	u32 bins[EWRK3_PKT_STAT_SZ];
+	u32 unicast;
+	u32 multicast;
+	u32 broadcast;
+	u32 excessive_collisions;
+	u32 tx_underruns;
+	u32 excessive_underruns;
+};
+
+struct ewrk3_private {
+	char adapter_name[80];	/* Name exported to /proc/ioports */
+	u_long shmem_base;	/* Shared memory start address */
+	void __iomem *shmem;
+	u_long shmem_length;	/* Shared memory window length */
+	struct ewrk3_stats pktStats; /* Private stats counters */
+	u_char irq_mask;	/* Adapter IRQ mask bits */
+	u_char mPage;		/* Maximum 2kB Page number */
+	u_char lemac;		/* Chip rev. level */
+	u_char hard_strapped;	/* Don't allow a full open */
+	u_char txc;		/* Transmit cut through */
+	void __iomem *mctbl;	/* Pointer to the multicast table */
+	u_char led_mask;	/* Used to reserve LED access for ethtool */
+	spinlock_t hw_lock;
+};
+
+/*
+   ** Force the EtherWORKS 3 card to be in 2kB MODE
+ */
+#define FORCE_2K_MODE { \
+  shmem_length = SHMEM_2K;\
+  outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\
+}
+
+/*
+   ** Public Functions
+ */
+static int ewrk3_open(struct net_device *dev);
+static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t ewrk3_interrupt(int irq, void *dev_id);
+static int ewrk3_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops ethtool_ops_203;
+static const struct ethtool_ops ethtool_ops;
+
+/*
+   ** Private functions
+ */
+static int ewrk3_hw_init(struct net_device *dev, u_long iobase);
+static void ewrk3_init(struct net_device *dev);
+static int ewrk3_rx(struct net_device *dev);
+static int ewrk3_tx(struct net_device *dev);
+static void ewrk3_timeout(struct net_device *dev);
+
+static void EthwrkSignature(char *name, char *eeprom_image);
+static int DevicePresent(u_long iobase);
+static void SetMulticastFilter(struct net_device *dev);
+static int EISA_signature(char *name, s32 eisa_id);
+
+static int Read_EEPROM(u_long iobase, u_char eaddr);
+static int Write_EEPROM(short data, u_long iobase, u_char eaddr);
+static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType);
+
+static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq);
+static int isa_probe(struct net_device *dev, u_long iobase);
+static int eisa_probe(struct net_device *dev, u_long iobase);
+
+static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12};
+
+static char name[EWRK3_STRLEN + 1];
+static int num_ewrks3s;
+
+/*
+   ** Miscellaneous defines...
+ */
+#define INIT_EWRK3 {\
+    outb(EEPROM_INIT, EWRK3_IOPR);\
+    mdelay(1);\
+}
+
+#ifndef MODULE
+struct net_device * __init ewrk3_probe(int unit)
+{
+	struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private));
+	int err;
+
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	if (unit >= 0) {
+		sprintf(dev->name, "eth%d", unit);
+		netdev_boot_setup_check(dev);
+	}
+
+	err = ewrk3_probe1(dev, dev->base_addr, dev->irq);
+	if (err)
+		goto out;
+	return dev;
+out:
+	free_netdev(dev);
+	return ERR_PTR(err);
+
+}
+#endif
+
+static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq)
+{
+	int err;
+
+	dev->base_addr = iobase;
+	dev->irq = irq;
+
+	/* Address PROM pattern */
+	err = isa_probe(dev, iobase);
+	if (err != 0)
+		err = eisa_probe(dev, iobase);
+
+	if (err)
+		return err;
+
+	err = register_netdev(dev);
+	if (err)
+		release_region(dev->base_addr, EWRK3_TOTAL_SIZE);
+
+	return err;
+}
+
+static const struct net_device_ops ewrk3_netdev_ops = {
+	.ndo_open		= ewrk3_open,
+	.ndo_start_xmit		= ewrk3_queue_pkt,
+	.ndo_stop		= ewrk3_close,
+	.ndo_set_rx_mode	= set_multicast_list,
+	.ndo_do_ioctl		= ewrk3_ioctl,
+	.ndo_tx_timeout		= ewrk3_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int __init
+ewrk3_hw_init(struct net_device *dev, u_long iobase)
+{
+	struct ewrk3_private *lp;
+	int i, status = 0;
+	u_long mem_start, shmem_length;
+	u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0;
+	u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0;
+
+	/*
+	** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot.
+	** This also disables the EISA_ENABLE bit in the EISA Control Register.
+	 */
+	if (iobase > 0x400)
+		eisa_cr = inb(EISA_CR);
+	INIT_EWRK3;
+
+	nicsr = inb(EWRK3_CSR);
+
+	icr = inb(EWRK3_ICR);
+	icr &= 0x70;
+	outb(icr, EWRK3_ICR);	/* Disable all the IRQs */
+
+	if (nicsr != (CSR_TXD | CSR_RXD))
+		return -ENXIO;
+
+	/* Check that the EEPROM is alive and well and not living on Pluto... */
+	for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) {
+		union {
+			short val;
+			char c[2];
+		} tmp;
+
+		tmp.val = (short) Read_EEPROM(iobase, (i >> 1));
+		eeprom_image[i] = tmp.c[0];
+		eeprom_image[i + 1] = tmp.c[1];
+		chksum += eeprom_image[i] + eeprom_image[i + 1];
+	}
+
+	if (chksum != 0) {	/* Bad EEPROM Data! */
+		printk("%s: Device has a bad on-board EEPROM.\n", dev->name);
+		return -ENXIO;
+	}
+
+	EthwrkSignature(name, eeprom_image);
+	if (*name == '\0')
+		return -ENXIO;
+
+	dev->base_addr = iobase;
+
+	if (iobase > 0x400) {
+		outb(eisa_cr, EISA_CR);		/* Rewrite the EISA CR */
+	}
+	lemac = eeprom_image[EEPROM_CHIPVER];
+	cmr = inb(EWRK3_CMR);
+
+	if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) ||
+	    ((lemac == LeMAC2) && !(cmr & CMR_HS))) {
+		printk("%s: %s at %#4lx", dev->name, name, iobase);
+		hard_strapped = 1;
+	} else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) {
+		/* EISA slot address */
+		printk("%s: %s at %#4lx (EISA slot %ld)",
+		       dev->name, name, iobase, ((iobase >> 12) & 0x0f));
+	} else {	/* ISA port address */
+		printk("%s: %s at %#4lx", dev->name, name, iobase);
+	}
+
+	printk(", h/w address ");
+	if (lemac != LeMAC2)
+		DevicePresent(iobase);	/* need after EWRK3_INIT */
+	status = get_hw_addr(dev, eeprom_image, lemac);
+	printk("%pM\n", dev->dev_addr);
+
+	if (status) {
+		printk("      which has an EEPROM CRC error.\n");
+		return -ENXIO;
+	}
+
+	if (lemac == LeMAC2) {	/* Special LeMAC2 CMR things */
+		cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS);
+		if (eeprom_image[EEPROM_MISC0] & READ_AHEAD)
+			cmr |= CMR_RA;
+		if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND)
+			cmr |= CMR_WB;
+		if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL)
+			cmr |= CMR_POLARITY;
+		if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK)
+			cmr |= CMR_LINK;
+		if (eeprom_image[EEPROM_MISC0] & _0WS_ENA)
+			cmr |= CMR_0WS;
+	}
+	if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM)
+		cmr |= CMR_DRAM;
+	outb(cmr, EWRK3_CMR);
+
+	cr = inb(EWRK3_CR);	/* Set up the Control Register */
+	cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD;
+	if (cr & SETUP_APD)
+		cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS;
+	cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS;
+	cr |= eeprom_image[EEPROM_MISC0] & ENA_16;
+	outb(cr, EWRK3_CR);
+
+	/*
+	** Determine the base address and window length for the EWRK3
+	** RAM from the memory base register.
+	*/
+	mem_start = inb(EWRK3_MBR);
+	shmem_length = 0;
+	if (mem_start != 0) {
+		if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) {
+			mem_start *= SHMEM_64K;
+			shmem_length = SHMEM_64K;
+		} else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) {
+			mem_start *= SHMEM_32K;
+			shmem_length = SHMEM_32K;
+		} else if ((mem_start >= 0x40) && (mem_start <= 0xff)) {
+			mem_start = mem_start * SHMEM_2K + 0x80000;
+			shmem_length = SHMEM_2K;
+		} else {
+			return -ENXIO;
+		}
+	}
+	/*
+	** See the top of this source code for comments about
+	** uncommenting this line.
+	*/
+/*          FORCE_2K_MODE; */
+
+	if (hard_strapped) {
+		printk("      is hard strapped.\n");
+	} else if (mem_start) {
+		printk("      has a %dk RAM window", (int) (shmem_length >> 10));
+		printk(" at 0x%.5lx", mem_start);
+	} else {
+		printk("      is in I/O only mode");
+	}
+
+	lp = netdev_priv(dev);
+	lp->shmem_base = mem_start;
+	lp->shmem = ioremap(mem_start, shmem_length);
+	if (!lp->shmem)
+		return -ENOMEM;
+	lp->shmem_length = shmem_length;
+	lp->lemac = lemac;
+	lp->hard_strapped = hard_strapped;
+	lp->led_mask = CR_LED;
+	spin_lock_init(&lp->hw_lock);
+
+	lp->mPage = 64;
+	if (cmr & CMR_DRAM)
+		lp->mPage <<= 1;	/* 2 DRAMS on module */
+
+	sprintf(lp->adapter_name, "%s (%s)", name, dev->name);
+
+	lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM;
+
+	if (!hard_strapped) {
+		/*
+		** Enable EWRK3 board interrupts for autoprobing
+		*/
+		icr |= ICR_IE;	/* Enable interrupts */
+		outb(icr, EWRK3_ICR);
+
+		/* The DMA channel may be passed in on this parameter. */
+		dev->dma = 0;
+
+		/* To auto-IRQ we enable the initialization-done and DMA err,
+		   interrupts. For now we will always get a DMA error. */
+		if (dev->irq < 2) {
+#ifndef MODULE
+			u_char irqnum;
+			unsigned long irq_mask;
+
+
+			irq_mask = probe_irq_on();
+
+			/*
+			** Trigger a TNE interrupt.
+			*/
+			icr |= ICR_TNEM;
+			outb(1, EWRK3_TDQ);	/* Write to the TX done queue */
+			outb(icr, EWRK3_ICR);	/* Unmask the TXD interrupt */
+
+			irqnum = irq[((icr & IRQ_SEL) >> 4)];
+
+			mdelay(20);
+			dev->irq = probe_irq_off(irq_mask);
+			if ((dev->irq) && (irqnum == dev->irq)) {
+				printk(" and uses IRQ%d.\n", dev->irq);
+			} else {
+				if (!dev->irq) {
+					printk(" and failed to detect IRQ line.\n");
+				} else if ((irqnum == 1) && (lemac == LeMAC2)) {
+					printk(" and an illegal IRQ line detected.\n");
+				} else {
+					printk(", but incorrect IRQ line detected.\n");
+				}
+				iounmap(lp->shmem);
+				return -ENXIO;
+			}
+
+			DISABLE_IRQs;	/* Mask all interrupts */
+
+#endif				/* MODULE */
+		} else {
+			printk(" and requires IRQ%d.\n", dev->irq);
+		}
+	}
+
+	if (ewrk3_debug > 1) {
+		printk(version);
+	}
+	/* The EWRK3-specific entries in the device structure. */
+	dev->netdev_ops = &ewrk3_netdev_ops;
+	if (lp->adapter_name[4] == '3')
+		SET_ETHTOOL_OPS(dev, &ethtool_ops_203);
+	else
+		SET_ETHTOOL_OPS(dev, &ethtool_ops);
+	dev->watchdog_timeo = QUEUE_PKT_TIMEOUT;
+
+	dev->mem_start = 0;
+
+	return 0;
+}
+
+
+static int ewrk3_open(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+	int status = 0;
+	u_char icr, csr;
+
+	/*
+	   ** Stop the TX and RX...
+	 */
+	STOP_EWRK3;
+
+	if (!lp->hard_strapped) {
+		if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) {
+			printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq);
+			status = -EAGAIN;
+		} else {
+
+			/*
+			   ** Re-initialize the EWRK3...
+			 */
+			ewrk3_init(dev);
+
+			if (ewrk3_debug > 1) {
+				printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq);
+				printk("  physical address: %pM\n", dev->dev_addr);
+				if (lp->shmem_length == 0) {
+					printk("  no shared memory, I/O only mode\n");
+				} else {
+					printk("  start of shared memory: 0x%08lx\n", lp->shmem_base);
+					printk("  window length: 0x%04lx\n", lp->shmem_length);
+				}
+				printk("  # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1));
+				printk("  csr:  0x%02x\n", inb(EWRK3_CSR));
+				printk("  cr:   0x%02x\n", inb(EWRK3_CR));
+				printk("  icr:  0x%02x\n", inb(EWRK3_ICR));
+				printk("  cmr:  0x%02x\n", inb(EWRK3_CMR));
+				printk("  fmqc: 0x%02x\n", inb(EWRK3_FMQC));
+			}
+			netif_start_queue(dev);
+			/*
+			   ** Unmask EWRK3 board interrupts
+			 */
+			icr = inb(EWRK3_ICR);
+			ENABLE_IRQs;
+
+		}
+	} else {
+		printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name);
+		printk(KERN_ERR "      Run the 'ewrk3setup' utility or remove the hard straps.\n");
+		return -EINVAL;
+	}
+
+	return status;
+}
+
+/*
+   ** Initialize the EtherWORKS 3 operating conditions
+ */
+static void ewrk3_init(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_char csr, page;
+	u_long iobase = dev->base_addr;
+	int i;
+
+	/*
+	   ** Enable any multicasts
+	 */
+	set_multicast_list(dev);
+
+	/*
+	** Set hardware MAC address. Address is initialized from the EEPROM
+	** during startup but may have since been changed by the user.
+	*/
+	for (i=0; i<ETH_ALEN; i++)
+		outb(dev->dev_addr[i], EWRK3_PAR0 + i);
+
+	/*
+	   ** Clean out any remaining entries in all the queues here
+	 */
+	while (inb(EWRK3_TQ));
+	while (inb(EWRK3_TDQ));
+	while (inb(EWRK3_RQ));
+	while (inb(EWRK3_FMQ));
+
+	/*
+	   ** Write a clean free memory queue
+	 */
+	for (page = 1; page < lp->mPage; page++) {	/* Write the free page numbers */
+		outb(page, EWRK3_FMQ);	/* to the Free Memory Queue */
+	}
+
+	START_EWRK3;		/* Enable the TX and/or RX */
+}
+
+/*
+ *  Transmit timeout
+ */
+
+static void ewrk3_timeout(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_char icr, csr;
+	u_long iobase = dev->base_addr;
+
+	if (!lp->hard_strapped)
+	{
+		printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n",
+		       dev->name, inb(EWRK3_CSR));
+
+		/*
+		   ** Mask all board interrupts
+		 */
+		DISABLE_IRQs;
+
+		/*
+		   ** Stop the TX and RX...
+		 */
+		STOP_EWRK3;
+
+		ewrk3_init(dev);
+
+		/*
+		   ** Unmask EWRK3 board interrupts
+		 */
+		ENABLE_IRQs;
+
+		dev->trans_start = jiffies; /* prevent tx timeout */
+		netif_wake_queue(dev);
+	}
+}
+
+/*
+   ** Writes a socket buffer to the free page queue
+ */
+static netdev_tx_t ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+	void __iomem *buf = NULL;
+	u_char icr;
+	u_char page;
+
+	spin_lock_irq (&lp->hw_lock);
+	DISABLE_IRQs;
+
+	/* if no resources available, exit, request packet be queued */
+	if (inb (EWRK3_FMQC) == 0) {
+		printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n",
+			dev->name);
+		printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n",
+			dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR),
+			inb (EWRK3_FMQC));
+		goto err_out;
+	}
+
+	/*
+	 ** Get a free page from the FMQ
+	 */
+	if ((page = inb (EWRK3_FMQ)) >= lp->mPage) {
+		printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n",
+		     (u_char) page);
+		goto err_out;
+	}
+
+
+	/*
+	 ** Set up shared memory window and pointer into the window
+	 */
+	if (lp->shmem_length == IO_ONLY) {
+		outb (page, EWRK3_IOPR);
+	} else if (lp->shmem_length == SHMEM_2K) {
+		buf = lp->shmem;
+		outb (page, EWRK3_MPR);
+	} else if (lp->shmem_length == SHMEM_32K) {
+		buf = (((short) page << 11) & 0x7800) + lp->shmem;
+		outb ((page >> 4), EWRK3_MPR);
+	} else if (lp->shmem_length == SHMEM_64K) {
+		buf = (((short) page << 11) & 0xf800) + lp->shmem;
+		outb ((page >> 5), EWRK3_MPR);
+	} else {
+		printk (KERN_ERR "%s: Oops - your private data area is hosed!\n",
+			dev->name);
+		BUG ();
+	}
+
+	/*
+	 ** Set up the buffer control structures and copy the data from
+	 ** the socket buffer to the shared memory .
+	 */
+	if (lp->shmem_length == IO_ONLY) {
+		int i;
+		u_char *p = skb->data;
+		outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA);
+		outb ((char) (skb->len & 0xff), EWRK3_DATA);
+		outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA);
+		outb ((char) 0x04, EWRK3_DATA);
+		for (i = 0; i < skb->len; i++) {
+			outb (*p++, EWRK3_DATA);
+		}
+		outb (page, EWRK3_TQ);	/* Start sending pkt */
+	} else {
+		writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf);	/* ctrl byte */
+		buf += 1;
+		writeb ((char) (skb->len & 0xff), buf);	/* length (16 bit xfer) */
+		buf += 1;
+		if (lp->txc) {
+			writeb(((skb->len >> 8) & 0xff) | XCT, buf);
+			buf += 1;
+			writeb (0x04, buf);	/* index byte */
+			buf += 1;
+			writeb (0x00, (buf + skb->len));	/* Write the XCT flag */
+			memcpy_toio (buf, skb->data, PRELOAD);	/* Write PRELOAD bytes */
+			outb (page, EWRK3_TQ);	/* Start sending pkt */
+			memcpy_toio (buf + PRELOAD,
+					 skb->data + PRELOAD,
+					 skb->len - PRELOAD);
+			writeb (0xff, (buf + skb->len));	/* Write the XCT flag */
+		} else {
+			writeb ((skb->len >> 8) & 0xff, buf);
+			buf += 1;
+			writeb (0x04, buf);	/* index byte */
+			buf += 1;
+			memcpy_toio (buf, skb->data, skb->len);	/* Write data bytes */
+			outb (page, EWRK3_TQ);	/* Start sending pkt */
+		}
+	}
+
+	ENABLE_IRQs;
+	spin_unlock_irq (&lp->hw_lock);
+
+	dev->stats.tx_bytes += skb->len;
+	dev_kfree_skb (skb);
+
+	/* Check for free resources: stop Tx queue if there are none */
+	if (inb (EWRK3_FMQC) == 0)
+		netif_stop_queue (dev);
+
+	return NETDEV_TX_OK;
+
+err_out:
+	ENABLE_IRQs;
+	spin_unlock_irq (&lp->hw_lock);
+	return NETDEV_TX_BUSY;
+}
+
+/*
+   ** The EWRK3 interrupt handler.
+ */
+static irqreturn_t ewrk3_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct ewrk3_private *lp;
+	u_long iobase;
+	u_char icr, cr, csr;
+
+	lp = netdev_priv(dev);
+	iobase = dev->base_addr;
+
+	/* get the interrupt information */
+	csr = inb(EWRK3_CSR);
+
+	/*
+	 ** Mask the EWRK3 board interrupts and turn on the LED
+	 */
+	spin_lock(&lp->hw_lock);
+	DISABLE_IRQs;
+
+	cr = inb(EWRK3_CR);
+	cr |= lp->led_mask;
+	outb(cr, EWRK3_CR);
+
+	if (csr & CSR_RNE)	/* Rx interrupt (packet[s] arrived) */
+		ewrk3_rx(dev);
+
+	if (csr & CSR_TNE)	/* Tx interrupt (packet sent) */
+		ewrk3_tx(dev);
+
+	/*
+	 ** Now deal with the TX/RX disable flags. These are set when there
+	 ** are no more resources. If resources free up then enable these
+	 ** interrupts, otherwise mask them - failure to do this will result
+	 ** in the system hanging in an interrupt loop.
+	 */
+	if (inb(EWRK3_FMQC)) {	/* any resources available? */
+		lp->irq_mask |= ICR_TXDM | ICR_RXDM;	/* enable the interrupt source */
+		csr &= ~(CSR_TXD | CSR_RXD);	/* ensure restart of a stalled TX or RX */
+		outb(csr, EWRK3_CSR);
+		netif_wake_queue(dev);
+	} else {
+		lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM);		/* disable the interrupt source */
+	}
+
+	/* Unmask the EWRK3 board interrupts and turn off the LED */
+	cr &= ~(lp->led_mask);
+	outb(cr, EWRK3_CR);
+	ENABLE_IRQs;
+	spin_unlock(&lp->hw_lock);
+	return IRQ_HANDLED;
+}
+
+/* Called with lp->hw_lock held */
+static int ewrk3_rx(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+	int i, status = 0;
+	u_char page;
+	void __iomem *buf = NULL;
+
+	while (inb(EWRK3_RQC) && !status) {	/* Whilst there's incoming data */
+		if ((page = inb(EWRK3_RQ)) < lp->mPage) {	/* Get next entry's buffer page */
+			/*
+			   ** Set up shared memory window and pointer into the window
+			 */
+			if (lp->shmem_length == IO_ONLY) {
+				outb(page, EWRK3_IOPR);
+			} else if (lp->shmem_length == SHMEM_2K) {
+				buf = lp->shmem;
+				outb(page, EWRK3_MPR);
+			} else if (lp->shmem_length == SHMEM_32K) {
+				buf = (((short) page << 11) & 0x7800) + lp->shmem;
+				outb((page >> 4), EWRK3_MPR);
+			} else if (lp->shmem_length == SHMEM_64K) {
+				buf = (((short) page << 11) & 0xf800) + lp->shmem;
+				outb((page >> 5), EWRK3_MPR);
+			} else {
+				status = -1;
+				printk("%s: Oops - your private data area is hosed!\n", dev->name);
+			}
+
+			if (!status) {
+				char rx_status;
+				int pkt_len;
+
+				if (lp->shmem_length == IO_ONLY) {
+					rx_status = inb(EWRK3_DATA);
+					pkt_len = inb(EWRK3_DATA);
+					pkt_len |= ((u_short) inb(EWRK3_DATA) << 8);
+				} else {
+					rx_status = readb(buf);
+					buf += 1;
+					pkt_len = readw(buf);
+					buf += 3;
+				}
+
+				if (!(rx_status & R_ROK)) {	/* There was an error. */
+					dev->stats.rx_errors++;	/* Update the error stats. */
+					if (rx_status & R_DBE)
+						dev->stats.rx_frame_errors++;
+					if (rx_status & R_CRC)
+						dev->stats.rx_crc_errors++;
+					if (rx_status & R_PLL)
+						dev->stats.rx_fifo_errors++;
+				} else {
+					struct sk_buff *skb;
+
+					if ((skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+						unsigned char *p;
+						skb_reserve(skb, 2);	/* Align to 16 bytes */
+						p = skb_put(skb, pkt_len);
+
+						if (lp->shmem_length == IO_ONLY) {
+							*p = inb(EWRK3_DATA);	/* dummy read */
+							for (i = 0; i < pkt_len; i++) {
+								*p++ = inb(EWRK3_DATA);
+							}
+						} else {
+							memcpy_fromio(p, buf, pkt_len);
+						}
+
+						for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) {
+							if (pkt_len < i * EWRK3_PKT_BIN_SZ) {
+								lp->pktStats.bins[i]++;
+								i = EWRK3_PKT_STAT_SZ;
+							}
+						}
+						p = skb->data;	/* Look at the dest addr */
+						if (is_multicast_ether_addr(p)) {
+							if (is_broadcast_ether_addr(p)) {
+								lp->pktStats.broadcast++;
+							} else {
+								lp->pktStats.multicast++;
+							}
+						} else if (compare_ether_addr(p, dev->dev_addr) == 0) {
+							lp->pktStats.unicast++;
+						}
+						lp->pktStats.bins[0]++;		/* Duplicates stats.rx_packets */
+						if (lp->pktStats.bins[0] == 0) {	/* Reset counters */
+							memset(&lp->pktStats, 0, sizeof(lp->pktStats));
+						}
+						/*
+						   ** Notify the upper protocol layers that there is another
+						   ** packet to handle
+						 */
+						skb->protocol = eth_type_trans(skb, dev);
+						netif_rx(skb);
+
+						/*
+						   ** Update stats
+						 */
+						dev->stats.rx_packets++;
+						dev->stats.rx_bytes += pkt_len;
+					} else {
+						printk("%s: Insufficient memory; nuking packet.\n", dev->name);
+						dev->stats.rx_dropped++;		/* Really, deferred. */
+						break;
+					}
+				}
+			}
+			/*
+			   ** Return the received buffer to the free memory queue
+			 */
+			outb(page, EWRK3_FMQ);
+		} else {
+			printk("ewrk3_rx(): Illegal page number, page %d\n", page);
+			printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC));
+		}
+	}
+	return status;
+}
+
+/*
+** Buffer sent - check for TX buffer errors.
+** Called with lp->hw_lock held
+*/
+static int ewrk3_tx(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+	u_char tx_status;
+
+	while ((tx_status = inb(EWRK3_TDQ)) > 0) {	/* Whilst there's old buffers */
+		if (tx_status & T_VSTS) {	/* The status is valid */
+			if (tx_status & T_TXE) {
+				dev->stats.tx_errors++;
+				if (tx_status & T_NCL)
+					dev->stats.tx_carrier_errors++;
+				if (tx_status & T_LCL)
+					dev->stats.tx_window_errors++;
+				if (tx_status & T_CTU) {
+					if ((tx_status & T_COLL) ^ T_XUR) {
+						lp->pktStats.tx_underruns++;
+					} else {
+						lp->pktStats.excessive_underruns++;
+					}
+				} else if (tx_status & T_COLL) {
+					if ((tx_status & T_COLL) ^ T_XCOLL) {
+						dev->stats.collisions++;
+					} else {
+						lp->pktStats.excessive_collisions++;
+					}
+				}
+			} else {
+				dev->stats.tx_packets++;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int ewrk3_close(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+	u_char icr, csr;
+
+	netif_stop_queue(dev);
+
+	if (ewrk3_debug > 1) {
+		printk("%s: Shutting down ethercard, status was %2.2x.\n",
+		       dev->name, inb(EWRK3_CSR));
+	}
+	/*
+	   ** We stop the EWRK3 here... mask interrupts and stop TX & RX
+	 */
+	DISABLE_IRQs;
+
+	STOP_EWRK3;
+
+	/*
+	   ** Clean out the TX and RX queues here (note that one entry
+	   ** may get added to either the TXD or RX queues if the TX or RX
+	   ** just starts processing a packet before the STOP_EWRK3 command
+	   ** is received. This will be flushed in the ewrk3_open() call).
+	 */
+	while (inb(EWRK3_TQ));
+	while (inb(EWRK3_TDQ));
+	while (inb(EWRK3_RQ));
+
+	if (!lp->hard_strapped) {
+		free_irq(dev->irq, dev);
+	}
+	return 0;
+}
+
+/*
+   ** Set or clear the multicast filter for this adapter.
+ */
+static void set_multicast_list(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+	u_char csr;
+
+	csr = inb(EWRK3_CSR);
+
+	if (lp->shmem_length == IO_ONLY) {
+		lp->mctbl = NULL;
+	} else {
+		lp->mctbl = lp->shmem + PAGE0_HTE;
+	}
+
+	csr &= ~(CSR_PME | CSR_MCE);
+	if (dev->flags & IFF_PROMISC) {		/* set promiscuous mode */
+		csr |= CSR_PME;
+		outb(csr, EWRK3_CSR);
+	} else {
+		SetMulticastFilter(dev);
+		csr |= CSR_MCE;
+		outb(csr, EWRK3_CSR);
+	}
+}
+
+/*
+   ** Calculate the hash code and update the logical address filter
+   ** from a list of ethernet multicast addresses.
+   ** Little endian crc one liner from Matt Thomas, DEC.
+   **
+   ** Note that when clearing the table, the broadcast bit must remain asserted
+   ** to receive broadcast messages.
+ */
+static void SetMulticastFilter(struct net_device *dev)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+	u_long iobase = dev->base_addr;
+	int i;
+	char bit, byte;
+	short __iomem *p = lp->mctbl;
+	u16 hashcode;
+	u32 crc;
+
+	spin_lock_irq(&lp->hw_lock);
+
+	if (lp->shmem_length == IO_ONLY) {
+		outb(0, EWRK3_IOPR);
+		outw(PAGE0_HTE, EWRK3_PIR1);
+	} else {
+		outb(0, EWRK3_MPR);
+	}
+
+	if (dev->flags & IFF_ALLMULTI) {
+		for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
+			if (lp->shmem_length == IO_ONLY) {
+				outb(0xff, EWRK3_DATA);
+			} else {	/* memset didn't work here */
+				writew(0xffff, p);
+				p++;
+				i++;
+			}
+		}
+	} else {
+		/* Clear table except for broadcast bit */
+		if (lp->shmem_length == IO_ONLY) {
+			for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) {
+				outb(0x00, EWRK3_DATA);
+			}
+			outb(0x80, EWRK3_DATA);
+			i++;	/* insert the broadcast bit */
+			for (; i < (HASH_TABLE_LEN >> 3); i++) {
+				outb(0x00, EWRK3_DATA);
+			}
+		} else {
+			memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3);
+			writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1);
+		}
+
+		/* Update table */
+		netdev_for_each_mc_addr(ha, dev) {
+			crc = ether_crc_le(ETH_ALEN, ha->addr);
+			hashcode = crc & ((1 << 9) - 1);	/* hashcode is 9 LSb of CRC */
+
+			byte = hashcode >> 3;	/* bit[3-8] -> byte in filter */
+			bit = 1 << (hashcode & 0x07);	/* bit[0-2] -> bit in byte */
+
+			if (lp->shmem_length == IO_ONLY) {
+				u_char tmp;
+
+				outw(PAGE0_HTE + byte, EWRK3_PIR1);
+				tmp = inb(EWRK3_DATA);
+				tmp |= bit;
+				outw(PAGE0_HTE + byte, EWRK3_PIR1);
+				outb(tmp, EWRK3_DATA);
+			} else {
+				writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte);
+			}
+		}
+	}
+
+	spin_unlock_irq(&lp->hw_lock);
+}
+
+/*
+   ** ISA bus I/O device probe
+ */
+static int __init isa_probe(struct net_device *dev, u_long ioaddr)
+{
+	int i = num_ewrks3s, maxSlots;
+	int ret = -ENODEV;
+
+	u_long iobase;
+
+	if (ioaddr >= 0x400)
+		goto out;
+
+	if (ioaddr == 0) {	/* Autoprobing */
+		iobase = EWRK3_IO_BASE;		/* Get the first slot address */
+		maxSlots = 24;
+	} else {		/* Probe a specific location */
+		iobase = ioaddr;
+		maxSlots = i + 1;
+	}
+
+	for (; (i < maxSlots) && (dev != NULL);
+	     iobase += EWRK3_IOP_INC, i++)
+	{
+		if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) {
+			if (DevicePresent(iobase) == 0) {
+				int irq = dev->irq;
+				ret = ewrk3_hw_init(dev, iobase);
+				if (!ret)
+					break;
+				dev->irq = irq;
+			}
+			release_region(iobase, EWRK3_TOTAL_SIZE);
+		}
+	}
+ out:
+
+	return ret;
+}
+
+/*
+   ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually
+   ** the motherboard.
+ */
+static int __init eisa_probe(struct net_device *dev, u_long ioaddr)
+{
+	int i, maxSlots;
+	u_long iobase;
+	int ret = -ENODEV;
+
+	if (ioaddr < 0x1000)
+		goto out;
+
+	iobase = ioaddr;
+	i = (ioaddr >> 12);
+	maxSlots = i + 1;
+
+	for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) {
+		if (EISA_signature(name, EISA_ID) == 0) {
+			if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) &&
+			    DevicePresent(iobase) == 0) {
+				int irq = dev->irq;
+				ret = ewrk3_hw_init(dev, iobase);
+				if (!ret)
+					break;
+				dev->irq = irq;
+			}
+			release_region(iobase, EWRK3_TOTAL_SIZE);
+		}
+	}
+
+ out:
+	return ret;
+}
+
+
+/*
+   ** Read the EWRK3 EEPROM using this routine
+ */
+static int Read_EEPROM(u_long iobase, u_char eaddr)
+{
+	int i;
+
+	outb((eaddr & 0x3f), EWRK3_PIR1);	/* set up 6 bits of address info */
+	outb(EEPROM_RD, EWRK3_IOPR);	/* issue read command */
+	for (i = 0; i < 5000; i++)
+		inb(EWRK3_CSR);	/* wait 1msec */
+
+	return inw(EWRK3_EPROM1);	/* 16 bits data return */
+}
+
+/*
+   ** Write the EWRK3 EEPROM using this routine
+ */
+static int Write_EEPROM(short data, u_long iobase, u_char eaddr)
+{
+	int i;
+
+	outb(EEPROM_WR_EN, EWRK3_IOPR);		/* issue write enable command */
+	for (i = 0; i < 5000; i++)
+		inb(EWRK3_CSR);	/* wait 1msec */
+	outw(data, EWRK3_EPROM1);	/* write data to register */
+	outb((eaddr & 0x3f), EWRK3_PIR1);	/* set up 6 bits of address info */
+	outb(EEPROM_WR, EWRK3_IOPR);	/* issue write command */
+	for (i = 0; i < 75000; i++)
+		inb(EWRK3_CSR);	/* wait 15msec */
+	outb(EEPROM_WR_DIS, EWRK3_IOPR);	/* issue write disable command */
+	for (i = 0; i < 5000; i++)
+		inb(EWRK3_CSR);	/* wait 1msec */
+
+	return 0;
+}
+
+/*
+   ** Look for a particular board name in the on-board EEPROM.
+ */
+static void __init EthwrkSignature(char *name, char *eeprom_image)
+{
+	int i;
+	char *signatures[] = EWRK3_SIGNATURE;
+
+	for (i=0; *signatures[i] != '\0'; i++)
+		if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) )
+			break;
+
+	if (*signatures[i] != '\0') {
+		memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN);
+		name[EWRK3_STRLEN] = '\0';
+	} else
+		name[0] = '\0';
+}
+
+/*
+   ** Look for a special sequence in the Ethernet station address PROM that
+   ** is common across all EWRK3 products.
+   **
+   ** Search the Ethernet address ROM for the signature. Since the ROM address
+   ** counter can start at an arbitrary point, the search must include the entire
+   ** probe sequence length plus the (length_of_the_signature - 1).
+   ** Stop the search IMMEDIATELY after the signature is found so that the
+   ** PROM address counter is correctly positioned at the start of the
+   ** ethernet address for later read out.
+ */
+
+static int __init DevicePresent(u_long iobase)
+{
+	union {
+		struct {
+			u32 a;
+			u32 b;
+		} llsig;
+		char Sig[sizeof(u32) << 1];
+	}
+	dev;
+	short sigLength;
+	char data;
+	int i, j, status = 0;
+
+	dev.llsig.a = ETH_PROM_SIG;
+	dev.llsig.b = ETH_PROM_SIG;
+	sigLength = sizeof(u32) << 1;
+
+	for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) {
+		data = inb(EWRK3_APROM);
+		if (dev.Sig[j] == data) {	/* track signature */
+			j++;
+		} else {	/* lost signature; begin search again */
+			if (data == dev.Sig[0]) {
+				j = 1;
+			} else {
+				j = 0;
+			}
+		}
+	}
+
+	if (j != sigLength) {
+		status = -ENODEV;	/* search failed */
+	}
+	return status;
+}
+
+static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType)
+{
+	int i, j, k;
+	u_short chksum;
+	u_char crc, lfsr, sd, status = 0;
+	u_long iobase = dev->base_addr;
+	u16 tmp;
+
+	if (chipType == LeMAC2) {
+		for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) {
+			sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j];
+			outb(dev->dev_addr[j], EWRK3_PAR0 + j);
+			for (k = 0; k < 8; k++, sd >>= 1) {
+				lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7;
+				crc = (crc >> 1) + lfsr;
+			}
+		}
+		if (crc != eeprom_image[EEPROM_PA_CRC])
+			status = -1;
+	} else {
+		for (i = 0, k = 0; i < ETH_ALEN;) {
+			k <<= 1;
+			if (k > 0xffff)
+				k -= 0xffff;
+
+			k += (u_char) (tmp = inb(EWRK3_APROM));
+			dev->dev_addr[i] = (u_char) tmp;
+			outb(dev->dev_addr[i], EWRK3_PAR0 + i);
+			i++;
+			k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8);
+			dev->dev_addr[i] = (u_char) tmp;
+			outb(dev->dev_addr[i], EWRK3_PAR0 + i);
+			i++;
+
+			if (k > 0xffff)
+				k -= 0xffff;
+		}
+		if (k == 0xffff)
+			k = 0;
+		chksum = inb(EWRK3_APROM);
+		chksum |= (inb(EWRK3_APROM) << 8);
+		if (k != chksum)
+			status = -1;
+	}
+
+	return status;
+}
+
+/*
+   ** Look for a particular board name in the EISA configuration space
+ */
+static int __init EISA_signature(char *name, s32 eisa_id)
+{
+	u_long i;
+	char *signatures[] = EWRK3_SIGNATURE;
+	char ManCode[EWRK3_STRLEN];
+	union {
+		s32 ID;
+		char Id[4];
+	} Eisa;
+	int status = 0;
+
+	*name = '\0';
+	for (i = 0; i < 4; i++) {
+		Eisa.Id[i] = inb(eisa_id + i);
+	}
+
+	ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40);
+	ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40);
+	ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30);
+	ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30);
+	ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30);
+	ManCode[5] = '\0';
+
+	for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) {
+		if (strstr(ManCode, signatures[i]) != NULL) {
+			strcpy(name, ManCode);
+			status = 1;
+		}
+	}
+
+	return status;		/* return the device name string */
+}
+
+static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	sprintf(info->fw_version, "%d", fwrev);
+	strcpy(info->bus_info, "N/A");
+	info->eedump_len = EEPROM_MAX;
+}
+
+static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	unsigned long iobase = dev->base_addr;
+	u8 cr = inb(EWRK3_CR);
+
+	switch (lp->adapter_name[4]) {
+	case '3': /* DE203 */
+		ecmd->supported = SUPPORTED_BNC;
+		ecmd->port = PORT_BNC;
+		break;
+
+	case '4': /* DE204 */
+		ecmd->supported = SUPPORTED_TP;
+		ecmd->port = PORT_TP;
+		break;
+
+	case '5': /* DE205 */
+		ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI;
+		ecmd->autoneg = !(cr & CR_APD);
+		/*
+		** Port is only valid if autoneg is disabled
+		** and even then we don't know if AUI is jumpered.
+		*/
+		if (!ecmd->autoneg)
+			ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP;
+		break;
+	}
+
+	ecmd->supported |= SUPPORTED_10baseT_Half;
+	ethtool_cmd_speed_set(ecmd, SPEED_10);
+	ecmd->duplex = DUPLEX_HALF;
+	return 0;
+}
+
+static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	unsigned long iobase = dev->base_addr;
+	unsigned long flags;
+	u8 cr;
+
+	/* DE205 is the only card with anything to set */
+	if (lp->adapter_name[4] != '5')
+		return -EOPNOTSUPP;
+
+	/* Sanity-check parameters */
+	if (ecmd->speed != SPEED_10)
+		return -EINVAL;
+	if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC)
+		return -EINVAL; /* AUI is not software-selectable */
+	if (ecmd->transceiver != XCVR_INTERNAL)
+		return -EINVAL;
+	if (ecmd->duplex != DUPLEX_HALF)
+		return -EINVAL;
+	if (ecmd->phy_address != 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&lp->hw_lock, flags);
+	cr = inb(EWRK3_CR);
+
+	/* If Autoneg is set, change to Auto Port mode */
+	/* Otherwise, disable Auto Port and set port explicitly */
+	if (ecmd->autoneg) {
+		cr &= ~CR_APD;
+	} else {
+		cr |= CR_APD;
+		if (ecmd->port == PORT_TP)
+			cr &= ~CR_PSEL;		/* Force TP */
+		else
+			cr |= CR_PSEL;		/* Force BNC */
+	}
+
+	/* Commit the changes */
+	outb(cr, EWRK3_CR);
+	spin_unlock_irqrestore(&lp->hw_lock, flags);
+	return 0;
+}
+
+static u32 ewrk3_get_link(struct net_device *dev)
+{
+	unsigned long iobase = dev->base_addr;
+	u8 cmr = inb(EWRK3_CMR);
+	/* DE203 has BNC only and link status does not apply */
+	/* On DE204 this is always valid since TP is the only port. */
+	/* On DE205 this reflects TP status even if BNC or AUI is selected. */
+	return !(cmr & CMR_LINK);
+}
+
+static int ewrk3_set_phys_id(struct net_device *dev,
+			     enum ethtool_phys_id_state state)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	unsigned long iobase = dev->base_addr;
+	u8 cr;
+
+	spin_lock_irq(&lp->hw_lock);
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* Prevent ISR from twiddling the LED */
+		lp->led_mask = 0;
+		spin_unlock_irq(&lp->hw_lock);
+		return 2;	/* cycle on/off twice per second */
+
+	case ETHTOOL_ID_ON:
+		cr = inb(EWRK3_CR);
+		outb(cr | CR_LED, EWRK3_CR);
+		break;
+
+	case ETHTOOL_ID_OFF:
+		cr = inb(EWRK3_CR);
+		outb(cr & ~CR_LED, EWRK3_CR);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		lp->led_mask = CR_LED;
+		cr = inb(EWRK3_CR);
+		outb(cr & ~CR_LED, EWRK3_CR);
+	}
+	spin_unlock_irq(&lp->hw_lock);
+
+	return 0;
+}
+
+static const struct ethtool_ops ethtool_ops_203 = {
+	.get_drvinfo = ewrk3_get_drvinfo,
+	.get_settings = ewrk3_get_settings,
+	.set_settings = ewrk3_set_settings,
+	.set_phys_id = ewrk3_set_phys_id,
+};
+
+static const struct ethtool_ops ethtool_ops = {
+	.get_drvinfo = ewrk3_get_drvinfo,
+	.get_settings = ewrk3_get_settings,
+	.set_settings = ewrk3_set_settings,
+	.get_link = ewrk3_get_link,
+	.set_phys_id = ewrk3_set_phys_id,
+};
+
+/*
+   ** Perform IOCTL call functions here. Some are privileged operations and the
+   ** effective uid is checked in those cases.
+ */
+static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct ewrk3_private *lp = netdev_priv(dev);
+	struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru;
+	u_long iobase = dev->base_addr;
+	int i, j, status = 0;
+	u_char csr;
+	unsigned long flags;
+	union ewrk3_addr {
+		u_char addr[HASH_TABLE_LEN * ETH_ALEN];
+		u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1];
+	};
+
+	union ewrk3_addr *tmp;
+
+	/* All we handle are private IOCTLs */
+	if (cmd != EWRK3IOCTL)
+		return -EOPNOTSUPP;
+
+	tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL);
+	if(tmp==NULL)
+		return -ENOMEM;
+
+	switch (ioc->cmd) {
+	case EWRK3_GET_HWADDR:	/* Get the hardware address */
+		for (i = 0; i < ETH_ALEN; i++) {
+			tmp->addr[i] = dev->dev_addr[i];
+		}
+		ioc->len = ETH_ALEN;
+		if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+			status = -EFAULT;
+		break;
+
+	case EWRK3_SET_HWADDR:	/* Set the hardware address */
+		if (capable(CAP_NET_ADMIN)) {
+			spin_lock_irqsave(&lp->hw_lock, flags);
+			csr = inb(EWRK3_CSR);
+			csr |= (CSR_TXD | CSR_RXD);
+			outb(csr, EWRK3_CSR);	/* Disable the TX and RX */
+			spin_unlock_irqrestore(&lp->hw_lock, flags);
+
+			if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) {
+				status = -EFAULT;
+				break;
+			}
+			spin_lock_irqsave(&lp->hw_lock, flags);
+			for (i = 0; i < ETH_ALEN; i++) {
+				dev->dev_addr[i] = tmp->addr[i];
+				outb(tmp->addr[i], EWRK3_PAR0 + i);
+			}
+
+			csr = inb(EWRK3_CSR);
+			csr &= ~(CSR_TXD | CSR_RXD);	/* Enable the TX and RX */
+			outb(csr, EWRK3_CSR);
+			spin_unlock_irqrestore(&lp->hw_lock, flags);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_SET_PROM:	/* Set Promiscuous Mode */
+		if (capable(CAP_NET_ADMIN)) {
+			spin_lock_irqsave(&lp->hw_lock, flags);
+			csr = inb(EWRK3_CSR);
+			csr |= CSR_PME;
+			csr &= ~CSR_MCE;
+			outb(csr, EWRK3_CSR);
+			spin_unlock_irqrestore(&lp->hw_lock, flags);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_CLR_PROM:	/* Clear Promiscuous Mode */
+		if (capable(CAP_NET_ADMIN)) {
+			spin_lock_irqsave(&lp->hw_lock, flags);
+			csr = inb(EWRK3_CSR);
+			csr &= ~CSR_PME;
+			outb(csr, EWRK3_CSR);
+			spin_unlock_irqrestore(&lp->hw_lock, flags);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_GET_MCA:	/* Get the multicast address table */
+		spin_lock_irqsave(&lp->hw_lock, flags);
+		if (lp->shmem_length == IO_ONLY) {
+			outb(0, EWRK3_IOPR);
+			outw(PAGE0_HTE, EWRK3_PIR1);
+			for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
+				tmp->addr[i] = inb(EWRK3_DATA);
+			}
+		} else {
+			outb(0, EWRK3_MPR);
+			memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3));
+		}
+		spin_unlock_irqrestore(&lp->hw_lock, flags);
+
+		ioc->len = (HASH_TABLE_LEN >> 3);
+		if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+			status = -EFAULT;
+
+		break;
+	case EWRK3_SET_MCA:	/* Set a multicast address */
+		if (capable(CAP_NET_ADMIN)) {
+			if (ioc->len > HASH_TABLE_LEN) {
+				status = -EINVAL;
+				break;
+			}
+			if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) {
+				status = -EFAULT;
+				break;
+			}
+			set_multicast_list(dev);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_CLR_MCA:	/* Clear all multicast addresses */
+		if (capable(CAP_NET_ADMIN)) {
+			set_multicast_list(dev);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_MCA_EN:	/* Enable multicast addressing */
+		if (capable(CAP_NET_ADMIN)) {
+			spin_lock_irqsave(&lp->hw_lock, flags);
+			csr = inb(EWRK3_CSR);
+			csr |= CSR_MCE;
+			csr &= ~CSR_PME;
+			outb(csr, EWRK3_CSR);
+			spin_unlock_irqrestore(&lp->hw_lock, flags);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_GET_STATS: { /* Get the driver statistics */
+		struct ewrk3_stats *tmp_stats =
+        		kmalloc(sizeof(lp->pktStats), GFP_KERNEL);
+		if (!tmp_stats) {
+			status = -ENOMEM;
+			break;
+		}
+
+		spin_lock_irqsave(&lp->hw_lock, flags);
+		memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats));
+		spin_unlock_irqrestore(&lp->hw_lock, flags);
+
+		ioc->len = sizeof(lp->pktStats);
+		if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats)))
+    			status = -EFAULT;
+		kfree(tmp_stats);
+		break;
+	}
+	case EWRK3_CLR_STATS:	/* Zero out the driver statistics */
+		if (capable(CAP_NET_ADMIN)) {
+			spin_lock_irqsave(&lp->hw_lock, flags);
+			memset(&lp->pktStats, 0, sizeof(lp->pktStats));
+			spin_unlock_irqrestore(&lp->hw_lock,flags);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_GET_CSR:	/* Get the CSR Register contents */
+		tmp->addr[0] = inb(EWRK3_CSR);
+		ioc->len = 1;
+		if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+			status = -EFAULT;
+		break;
+	case EWRK3_SET_CSR:	/* Set the CSR Register contents */
+		if (capable(CAP_NET_ADMIN)) {
+			if (copy_from_user(tmp->addr, ioc->data, 1)) {
+				status = -EFAULT;
+				break;
+			}
+			outb(tmp->addr[0], EWRK3_CSR);
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_GET_EEPROM:	/* Get the EEPROM contents */
+		if (capable(CAP_NET_ADMIN)) {
+			for (i = 0; i < (EEPROM_MAX >> 1); i++) {
+				tmp->val[i] = (short) Read_EEPROM(iobase, i);
+			}
+			i = EEPROM_MAX;
+			tmp->addr[i++] = inb(EWRK3_CMR);		/* Config/Management Reg. */
+			for (j = 0; j < ETH_ALEN; j++) {
+				tmp->addr[i++] = inb(EWRK3_PAR0 + j);
+			}
+			ioc->len = EEPROM_MAX + 1 + ETH_ALEN;
+			if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+				status = -EFAULT;
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_SET_EEPROM:	/* Set the EEPROM contents */
+		if (capable(CAP_NET_ADMIN)) {
+			if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) {
+				status = -EFAULT;
+				break;
+			}
+			for (i = 0; i < (EEPROM_MAX >> 1); i++) {
+				Write_EEPROM(tmp->val[i], iobase, i);
+			}
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_GET_CMR:	/* Get the CMR Register contents */
+		tmp->addr[0] = inb(EWRK3_CMR);
+		ioc->len = 1;
+		if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+			status = -EFAULT;
+		break;
+	case EWRK3_SET_TX_CUT_THRU:	/* Set TX cut through mode */
+		if (capable(CAP_NET_ADMIN)) {
+			lp->txc = 1;
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	case EWRK3_CLR_TX_CUT_THRU:	/* Clear TX cut through mode */
+		if (capable(CAP_NET_ADMIN)) {
+			lp->txc = 0;
+		} else {
+			status = -EPERM;
+		}
+
+		break;
+	default:
+		status = -EOPNOTSUPP;
+	}
+	kfree(tmp);
+	return status;
+}
+
+#ifdef MODULE
+static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S];
+static int ndevs;
+static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, };
+
+/* '21' below should really be 'MAX_NUM_EWRK3S' */
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)");
+MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)");
+
+static __exit void ewrk3_exit_module(void)
+{
+	int i;
+
+	for( i=0; i<ndevs; i++ ) {
+		struct net_device *dev = ewrk3_devs[i];
+		struct ewrk3_private *lp = netdev_priv(dev);
+		ewrk3_devs[i] = NULL;
+		unregister_netdev(dev);
+		release_region(dev->base_addr, EWRK3_TOTAL_SIZE);
+		iounmap(lp->shmem);
+		free_netdev(dev);
+	}
+}
+
+static __init int ewrk3_init_module(void)
+{
+	int i=0;
+
+	while( io[i] && irq[i] ) {
+		struct net_device *dev
+			= alloc_etherdev(sizeof(struct ewrk3_private));
+
+		if (!dev)
+			break;
+
+		if (ewrk3_probe1(dev, io[i], irq[i]) != 0) {
+			free_netdev(dev);
+			break;
+		}
+
+		ewrk3_devs[ndevs++] = dev;
+		i++;
+	}
+
+	return ndevs ? 0 : -EIO;
+}
+
+
+/* Hack for breakage in new module stuff */
+module_exit(ewrk3_exit_module);
+module_init(ewrk3_init_module);
+#endif				/* MODULE */
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/dec/ewrk3.h b/drivers/net/ethernet/dec/ewrk3.h
new file mode 100644
index 000000000000..8e0ee906567b
--- /dev/null
+++ b/drivers/net/ethernet/dec/ewrk3.h
@@ -0,0 +1,322 @@
+/*
+    Written 1994 by David C. Davies.
+
+    Copyright 1994 Digital Equipment Corporation.
+
+    This software may be used and distributed according to  the terms of the
+    GNU General Public License, incorporated herein by reference.
+
+    The author may    be  reached as davies@wanton.lkg.dec.com  or   Digital
+    Equipment Corporation, 550 King Street, Littleton MA 01460.
+
+    =========================================================================
+*/
+
+/*
+** I/O Address Register Map
+*/
+#define EWRK3_CSR    iobase+0x00   /* Control and Status Register */
+#define EWRK3_CR     iobase+0x01   /* Control Register */
+#define EWRK3_ICR    iobase+0x02   /* Interrupt Control Register */
+#define EWRK3_TSR    iobase+0x03   /* Transmit Status Register */
+#define EWRK3_RSVD1  iobase+0x04   /* RESERVED */
+#define EWRK3_RSVD2  iobase+0x05   /* RESERVED */
+#define EWRK3_FMQ    iobase+0x06   /* Free Memory Queue */
+#define EWRK3_FMQC   iobase+0x07   /* Free Memory Queue Counter */
+#define EWRK3_RQ     iobase+0x08   /* Receive Queue */
+#define EWRK3_RQC    iobase+0x09   /* Receive Queue Counter */
+#define EWRK3_TQ     iobase+0x0a   /* Transmit Queue */
+#define EWRK3_TQC    iobase+0x0b   /* Transmit Queue Counter */
+#define EWRK3_TDQ    iobase+0x0c   /* Transmit Done Queue */
+#define EWRK3_TDQC   iobase+0x0d   /* Transmit Done Queue Counter */
+#define EWRK3_PIR1   iobase+0x0e   /* Page Index Register 1 */
+#define EWRK3_PIR2   iobase+0x0f   /* Page Index Register 2 */
+#define EWRK3_DATA   iobase+0x10   /* Data Register */
+#define EWRK3_IOPR   iobase+0x11   /* I/O Page Register */
+#define EWRK3_IOBR   iobase+0x12   /* I/O Base Register */
+#define EWRK3_MPR    iobase+0x13   /* Memory Page Register */
+#define EWRK3_MBR    iobase+0x14   /* Memory Base Register */
+#define EWRK3_APROM  iobase+0x15   /* Address PROM */
+#define EWRK3_EPROM1 iobase+0x16   /* EEPROM Data Register 1 */
+#define EWRK3_EPROM2 iobase+0x17   /* EEPROM Data Register 2 */
+#define EWRK3_PAR0   iobase+0x18   /* Physical Address Register 0 */
+#define EWRK3_PAR1   iobase+0x19   /* Physical Address Register 1 */
+#define EWRK3_PAR2   iobase+0x1a   /* Physical Address Register 2 */
+#define EWRK3_PAR3   iobase+0x1b   /* Physical Address Register 3 */
+#define EWRK3_PAR4   iobase+0x1c   /* Physical Address Register 4 */
+#define EWRK3_PAR5   iobase+0x1d   /* Physical Address Register 5 */
+#define EWRK3_CMR    iobase+0x1e   /* Configuration/Management Register */
+
+/*
+** Control Page Map
+*/
+#define PAGE0_FMQ     0x000         /* Free Memory Queue */
+#define PAGE0_RQ      0x080         /* Receive Queue */
+#define PAGE0_TQ      0x100         /* Transmit Queue */
+#define PAGE0_TDQ     0x180         /* Transmit Done Queue */
+#define PAGE0_HTE     0x200         /* Hash Table Entries */
+#define PAGE0_RSVD    0x240         /* RESERVED */
+#define PAGE0_USRD    0x600         /* User Data */
+
+/*
+** Control and Status Register bit definitions (EWRK3_CSR)
+*/
+#define CSR_RA		0x80	    /* Runt Accept */
+#define CSR_PME		0x40	    /* Promiscuous Mode Enable */
+#define CSR_MCE		0x20	    /* Multicast Enable */
+#define CSR_TNE		0x08	    /* TX Done Queue Not Empty */
+#define CSR_RNE		0x04	    /* RX Queue Not Empty */
+#define CSR_TXD		0x02	    /* TX Disable */
+#define CSR_RXD		0x01	    /* RX Disable */
+
+/*
+** Control Register bit definitions (EWRK3_CR)
+*/
+#define CR_APD		0x80	/* Auto Port Disable */
+#define CR_PSEL		0x40	/* Port Select (0->TP port) */
+#define CR_LBCK		0x20	/* LoopBaCK enable */
+#define CR_FDUP		0x10	/* Full DUPlex enable */
+#define CR_FBUS		0x08	/* Fast BUS enable (ISA clk > 8.33MHz) */
+#define CR_EN_16	0x04	/* ENable 16 bit memory accesses */
+#define CR_LED		0x02	/* LED (1-> turn on) */
+
+/*
+** Interrupt Control Register bit definitions (EWRK3_ICR)
+*/
+#define ICR_IE		0x80	/* Interrupt Enable */
+#define ICR_IS		0x60	/* Interrupt Selected */
+#define ICR_TNEM	0x08	/* TNE Mask (0->mask) */
+#define ICR_RNEM	0x04	/* RNE Mask (0->mask) */
+#define ICR_TXDM	0x02	/* TXD Mask (0->mask) */
+#define ICR_RXDM	0x01	/* RXD Mask (0->mask) */
+
+/*
+** Transmit Status Register bit definitions (EWRK3_TSR)
+*/
+#define TSR_NCL		0x80	/* No Carrier Loopback */
+#define TSR_ID		0x40	/* Initially Deferred */
+#define TSR_LCL		0x20	/* Late CoLlision */
+#define TSR_ECL		0x10	/* Excessive CoLlisions */
+#define TSR_RCNTR	0x0f	/* Retries CouNTeR */
+
+/*
+** I/O Page Register bit definitions (EWRK3_IOPR)
+*/
+#define EEPROM_INIT	0xc0	/* EEPROM INIT command */
+#define EEPROM_WR_EN	0xc8	/* EEPROM WRITE ENABLE command */
+#define EEPROM_WR	0xd0	/* EEPROM WRITE command */
+#define EEPROM_WR_DIS	0xd8	/* EEPROM WRITE DISABLE command */
+#define EEPROM_RD	0xe0	/* EEPROM READ command */
+
+/*
+** I/O Base Register bit definitions (EWRK3_IOBR)
+*/
+#define EISA_REGS_EN	0x20	/* Enable EISA ID and Control Registers */
+#define EISA_IOB        0x1f	/* Compare bits for I/O Base Address */
+
+/*
+** I/O Configuration/Management Register bit definitions (EWRK3_CMR)
+*/
+#define CMR_RA          0x80    /* Read Ahead */
+#define CMR_WB          0x40    /* Write Behind */
+#define CMR_LINK        0x20	/* 0->TP */
+#define CMR_POLARITY    0x10	/* Informational */
+#define CMR_NO_EEPROM	0x0c	/* NO_EEPROM<1:0> pin status */
+#define CMR_HS          0x08	/* Hard Strapped pin status (LeMAC2) */
+#define CMR_PNP         0x04    /* Plug 'n Play */
+#define CMR_DRAM        0x02	/* 0-> 1DRAM, 1-> 2 DRAM on board */
+#define CMR_0WS         0x01    /* Zero Wait State */
+
+/*
+** MAC Receive Status Register bit definitions
+*/
+
+#define R_ROK     	0x80 	/* Receive OK summary */
+#define R_IAM     	0x10 	/* Individual Address Match */
+#define R_MCM     	0x08 	/* MultiCast Match */
+#define R_DBE     	0x04 	/* Dribble Bit Error */
+#define R_CRC     	0x02 	/* CRC error */
+#define R_PLL     	0x01 	/* Phase Lock Lost */
+
+/*
+** MAC Transmit Control Register bit definitions
+*/
+
+#define TCR_SQEE    	0x40 	/* SQE Enable - look for heartbeat  */
+#define TCR_SED     	0x20 	/* Stop when Error Detected */
+#define TCR_QMODE     	0x10 	/* Q_MODE */
+#define TCR_LAB         0x08 	/* Less Aggressive Backoff */
+#define TCR_PAD     	0x04 	/* PAD Runt Packets */
+#define TCR_IFC     	0x02 	/* Insert Frame Check */
+#define TCR_ISA     	0x01 	/* Insert Source Address */
+
+/*
+** MAC Transmit Status Register bit definitions
+*/
+
+#define T_VSTS    	0x80 	/* Valid STatuS */
+#define T_CTU     	0x40 	/* Cut Through Used */
+#define T_SQE     	0x20 	/* Signal Quality Error */
+#define T_NCL     	0x10 	/* No Carrier Loopback */
+#define T_LCL           0x08 	/* Late Collision */
+#define T_ID      	0x04 	/* Initially Deferred */
+#define T_COLL     	0x03 	/* COLLision status */
+#define T_XCOLL         0x03    /* Excessive Collisions */
+#define T_MCOLL         0x02    /* Multiple Collisions */
+#define T_OCOLL         0x01    /* One Collision */
+#define T_NOCOLL        0x00    /* No Collisions */
+#define T_XUR           0x03    /* Excessive Underruns */
+#define T_TXE           0x7f    /* TX Errors */
+
+/*
+** EISA Configuration Register bit definitions
+*/
+
+#define EISA_ID       iobase + 0x0c80  /* EISA ID Registers */
+#define EISA_ID0      iobase + 0x0c80  /* EISA ID Register 0 */
+#define EISA_ID1      iobase + 0x0c81  /* EISA ID Register 1 */
+#define EISA_ID2      iobase + 0x0c82  /* EISA ID Register 2 */
+#define EISA_ID3      iobase + 0x0c83  /* EISA ID Register 3 */
+#define EISA_CR       iobase + 0x0c84  /* EISA Control Register */
+
+/*
+** EEPROM BYTES
+*/
+#define EEPROM_MEMB     0x00
+#define EEPROM_IOB      0x01
+#define EEPROM_EISA_ID0 0x02
+#define EEPROM_EISA_ID1 0x03
+#define EEPROM_EISA_ID2 0x04
+#define EEPROM_EISA_ID3 0x05
+#define EEPROM_MISC0    0x06
+#define EEPROM_MISC1    0x07
+#define EEPROM_PNAME7   0x08
+#define EEPROM_PNAME6   0x09
+#define EEPROM_PNAME5   0x0a
+#define EEPROM_PNAME4   0x0b
+#define EEPROM_PNAME3   0x0c
+#define EEPROM_PNAME2   0x0d
+#define EEPROM_PNAME1   0x0e
+#define EEPROM_PNAME0   0x0f
+#define EEPROM_SWFLAGS  0x10
+#define EEPROM_HWCAT    0x11
+#define EEPROM_NETMAN2  0x12
+#define EEPROM_REVLVL   0x13
+#define EEPROM_NETMAN0  0x14
+#define EEPROM_NETMAN1  0x15
+#define EEPROM_CHIPVER  0x16
+#define EEPROM_SETUP    0x17
+#define EEPROM_PADDR0   0x18
+#define EEPROM_PADDR1   0x19
+#define EEPROM_PADDR2   0x1a
+#define EEPROM_PADDR3   0x1b
+#define EEPROM_PADDR4   0x1c
+#define EEPROM_PADDR5   0x1d
+#define EEPROM_PA_CRC   0x1e
+#define EEPROM_CHKSUM   0x1f
+
+/*
+** EEPROM bytes for checksumming
+*/
+#define EEPROM_MAX      32             /* bytes */
+
+/*
+** EEPROM MISCELLANEOUS FLAGS
+*/
+#define RBE_SHADOW	0x0100	/* Remote Boot Enable Shadow */
+#define READ_AHEAD      0x0080  /* Read Ahead feature */
+#define IRQ_SEL2        0x0070  /* IRQ line selection (LeMAC2) */
+#define IRQ_SEL         0x0060  /* IRQ line selection */
+#define FAST_BUS        0x0008  /* ISA Bus speeds > 8.33MHz */
+#define ENA_16          0x0004  /* Enables 16 bit memory transfers */
+#define WRITE_BEHIND    0x0002  /* Write Behind feature */
+#define _0WS_ENA        0x0001  /* Zero Wait State Enable */
+
+/*
+** EEPROM NETWORK MANAGEMENT FLAGS
+*/
+#define NETMAN_POL      0x04    /* Polarity defeat */
+#define NETMAN_LINK     0x02    /* Link defeat */
+#define NETMAN_CCE      0x01    /* Custom Counters Enable */
+
+/*
+** EEPROM SW FLAGS
+*/
+#define SW_SQE		0x10	/* Signal Quality Error */
+#define SW_LAB		0x08	/* Less Aggressive Backoff */
+#define SW_INIT		0x04	/* Initialized */
+#define SW_TIMEOUT     	0x02	/* 0:2.5 mins, 1: 30 secs */
+#define SW_REMOTE      	0x01    /* Remote Boot Enable -> 1 */
+
+/*
+** EEPROM SETUP FLAGS
+*/
+#define SETUP_APD	0x80	/* AutoPort Disable */
+#define SETUP_PS	0x40	/* Port Select */
+#define SETUP_MP	0x20	/* MultiPort */
+#define SETUP_1TP	0x10	/* 1 port, TP */
+#define SETUP_1COAX	0x00	/* 1 port, Coax */
+#define SETUP_DRAM	0x02	/* Number of DRAMS on board */
+
+/*
+** EEPROM MANAGEMENT FLAGS
+*/
+#define MGMT_CCE	0x01	/* Custom Counters Enable */
+
+/*
+** EEPROM VERSIONS
+*/
+#define LeMAC           0x11
+#define LeMAC2          0x12
+
+/*
+** Miscellaneous
+*/
+
+#define EEPROM_WAIT_TIME 1000    /* Number of microseconds */
+#define EISA_EN         0x0001   /* Enable EISA bus buffers */
+
+#define HASH_TABLE_LEN   512     /* Bits */
+
+#define XCT 0x80                 /* Transmit Cut Through */
+#define PRELOAD 16               /* 4 long words */
+
+#define MASK_INTERRUPTS   1
+#define UNMASK_INTERRUPTS 0
+
+#define EEPROM_OFFSET(a) ((u_short)((u_long)(a)))
+
+/*
+** Include the IOCTL stuff
+*/
+#include <linux/sockios.h>
+
+#define	EWRK3IOCTL	SIOCDEVPRIVATE
+
+struct ewrk3_ioctl {
+	unsigned short cmd;                /* Command to run */
+	unsigned short len;                /* Length of the data buffer */
+	unsigned char  __user *data;       /* Pointer to the data buffer */
+};
+
+/*
+** Recognised commands for the driver
+*/
+#define EWRK3_GET_HWADDR	0x01 /* Get the hardware address */
+#define EWRK3_SET_HWADDR	0x02 /* Get the hardware address */
+#define EWRK3_SET_PROM  	0x03 /* Set Promiscuous Mode */
+#define EWRK3_CLR_PROM  	0x04 /* Clear Promiscuous Mode */
+#define EWRK3_SAY_BOO	        0x05 /* Say "Boo!" to the kernel log file */
+#define EWRK3_GET_MCA   	0x06 /* Get a multicast address */
+#define EWRK3_SET_MCA   	0x07 /* Set a multicast address */
+#define EWRK3_CLR_MCA    	0x08 /* Clear a multicast address */
+#define EWRK3_MCA_EN    	0x09 /* Enable a multicast address group */
+#define EWRK3_GET_STATS  	0x0a /* Get the driver statistics */
+#define EWRK3_CLR_STATS 	0x0b /* Zero out the driver statistics */
+#define EWRK3_GET_CSR   	0x0c /* Get the CSR Register contents */
+#define EWRK3_SET_CSR   	0x0d /* Set the CSR Register contents */
+#define EWRK3_GET_EEPROM   	0x0e /* Get the EEPROM contents */
+#define EWRK3_SET_EEPROM	0x0f /* Set the EEPROM contents */
+#define EWRK3_GET_CMR   	0x10 /* Get the CMR Register contents */
+#define EWRK3_CLR_TX_CUT_THRU  	0x11 /* Clear the TX cut through mode */
+#define EWRK3_SET_TX_CUT_THRU	0x12 /* Set the TX cut through mode */
diff --git a/drivers/net/ethernet/dec/tulip/21142.c b/drivers/net/ethernet/dec/tulip/21142.c
new file mode 100644
index 000000000000..25b8deedbef8
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/21142.c
@@ -0,0 +1,257 @@
+/*
+	drivers/net/tulip/21142.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
+	Hardware Reference Manual" is currently available at :
+	http://developer.intel.com/design/network/manuals/278074.htm
+
+	Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+#include <linux/delay.h>
+#include "tulip.h"
+
+
+static u16 t21142_csr13[] = { 0x0001, 0x0009, 0x0009, 0x0000, 0x0001, };
+u16 t21142_csr14[] =	    { 0xFFFF, 0x0705, 0x0705, 0x0000, 0x7F3D, };
+static u16 t21142_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
+
+
+/* Handle the 21143 uniquely: do autoselect with NWay, not the EEPROM list
+   of available transceivers.  */
+void t21142_media_task(struct work_struct *work)
+{
+	struct tulip_private *tp =
+		container_of(work, struct tulip_private, media_work);
+	struct net_device *dev = tp->dev;
+	void __iomem *ioaddr = tp->base_addr;
+	int csr12 = ioread32(ioaddr + CSR12);
+	int next_tick = 60*HZ;
+	int new_csr6 = 0;
+	int csr14 = ioread32(ioaddr + CSR14);
+
+	/* CSR12[LS10,LS100] are not reliable during autonegotiation */
+	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+		csr12 |= 6;
+	if (tulip_debug > 2)
+		dev_info(&dev->dev, "21143 negotiation status %08x, %s\n",
+			 csr12, medianame[dev->if_port]);
+	if (tulip_media_cap[dev->if_port] & MediaIsMII) {
+		if (tulip_check_duplex(dev) < 0) {
+			netif_carrier_off(dev);
+			next_tick = 3*HZ;
+		} else {
+			netif_carrier_on(dev);
+			next_tick = 60*HZ;
+		}
+	} else if (tp->nwayset) {
+		/* Don't screw up a negotiated session! */
+		if (tulip_debug > 1)
+			dev_info(&dev->dev,
+				 "Using NWay-set %s media, csr12 %08x\n",
+				 medianame[dev->if_port], csr12);
+	} else if (tp->medialock) {
+			;
+	} else if (dev->if_port == 3) {
+		if (csr12 & 2) {	/* No 100mbps link beat, revert to 10mbps. */
+			if (tulip_debug > 1)
+				dev_info(&dev->dev,
+					 "No 21143 100baseTx link beat, %08x, trying NWay\n",
+					 csr12);
+			t21142_start_nway(dev);
+			next_tick = 3*HZ;
+		}
+	} else if ((csr12 & 0x7000) != 0x5000) {
+		/* Negotiation failed.  Search media types. */
+		if (tulip_debug > 1)
+			dev_info(&dev->dev,
+				 "21143 negotiation failed, status %08x\n",
+				 csr12);
+		if (!(csr12 & 4)) {		/* 10mbps link beat good. */
+			new_csr6 = 0x82420000;
+			dev->if_port = 0;
+			iowrite32(0, ioaddr + CSR13);
+			iowrite32(0x0003FFFF, ioaddr + CSR14);
+			iowrite16(t21142_csr15[dev->if_port], ioaddr + CSR15);
+			iowrite32(t21142_csr13[dev->if_port], ioaddr + CSR13);
+		} else {
+			/* Select 100mbps port to check for link beat. */
+			new_csr6 = 0x83860000;
+			dev->if_port = 3;
+			iowrite32(0, ioaddr + CSR13);
+			iowrite32(0x0003FFFF, ioaddr + CSR14);
+			iowrite16(8, ioaddr + CSR15);
+			iowrite32(1, ioaddr + CSR13);
+		}
+		if (tulip_debug > 1)
+			dev_info(&dev->dev, "Testing new 21143 media %s\n",
+				 medianame[dev->if_port]);
+		if (new_csr6 != (tp->csr6 & ~0x00D5)) {
+			tp->csr6 &= 0x00D5;
+			tp->csr6 |= new_csr6;
+			iowrite32(0x0301, ioaddr + CSR12);
+			tulip_restart_rxtx(tp);
+		}
+		next_tick = 3*HZ;
+	}
+
+	/* mod_timer synchronizes us with potential add_timer calls
+	 * from interrupts.
+	 */
+	mod_timer(&tp->timer, RUN_AT(next_tick));
+}
+
+
+void t21142_start_nway(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int csr14 = ((tp->sym_advertise & 0x0780) << 9)  |
+		((tp->sym_advertise & 0x0020) << 1) | 0xffbf;
+
+	dev->if_port = 0;
+	tp->nway = tp->mediasense = 1;
+	tp->nwayset = tp->lpar = 0;
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "Restarting 21143 autonegotiation, csr14=%08x\n",
+			   csr14);
+	iowrite32(0x0001, ioaddr + CSR13);
+	udelay(100);
+	iowrite32(csr14, ioaddr + CSR14);
+	tp->csr6 = 0x82420000 | (tp->sym_advertise & 0x0040 ? FullDuplex : 0);
+	iowrite32(tp->csr6, ioaddr + CSR6);
+	if (tp->mtable  &&  tp->mtable->csr15dir) {
+		iowrite32(tp->mtable->csr15dir, ioaddr + CSR15);
+		iowrite32(tp->mtable->csr15val, ioaddr + CSR15);
+	} else
+		iowrite16(0x0008, ioaddr + CSR15);
+	iowrite32(0x1301, ioaddr + CSR12); 		/* Trigger NWAY. */
+}
+
+
+
+void t21142_lnk_change(struct net_device *dev, int csr5)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int csr12 = ioread32(ioaddr + CSR12);
+	int csr14 = ioread32(ioaddr + CSR14);
+
+	/* CSR12[LS10,LS100] are not reliable during autonegotiation */
+	if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+		csr12 |= 6;
+	if (tulip_debug > 1)
+		dev_info(&dev->dev,
+			 "21143 link status interrupt %08x, CSR5 %x, %08x\n",
+			 csr12, csr5, csr14);
+
+	/* If NWay finished and we have a negotiated partner capability. */
+	if (tp->nway  &&  !tp->nwayset  &&  (csr12 & 0x7000) == 0x5000) {
+		int setup_done = 0;
+		int negotiated = tp->sym_advertise & (csr12 >> 16);
+		tp->lpar = csr12 >> 16;
+		tp->nwayset = 1;
+		/* If partner cannot negotiate, it is 10Mbps Half Duplex */
+		if (!(csr12 & 0x8000))		dev->if_port = 0;
+		else if (negotiated & 0x0100)	dev->if_port = 5;
+		else if (negotiated & 0x0080)	dev->if_port = 3;
+		else if (negotiated & 0x0040)	dev->if_port = 4;
+		else if (negotiated & 0x0020)	dev->if_port = 0;
+		else {
+			tp->nwayset = 0;
+			if ((csr12 & 2) == 0  &&  (tp->sym_advertise & 0x0180))
+				dev->if_port = 3;
+		}
+		tp->full_duplex = (tulip_media_cap[dev->if_port] & MediaAlwaysFD) ? 1:0;
+
+		if (tulip_debug > 1) {
+			if (tp->nwayset)
+				dev_info(&dev->dev,
+					 "Switching to %s based on link negotiation %04x & %04x = %04x\n",
+					 medianame[dev->if_port],
+					 tp->sym_advertise, tp->lpar,
+					 negotiated);
+			else
+				dev_info(&dev->dev,
+					 "Autonegotiation failed, using %s, link beat status %04x\n",
+					 medianame[dev->if_port], csr12);
+		}
+
+		if (tp->mtable) {
+			int i;
+			for (i = 0; i < tp->mtable->leafcount; i++)
+				if (tp->mtable->mleaf[i].media == dev->if_port) {
+					int startup = ! ((tp->chip_id == DC21143 && (tp->revision == 48 || tp->revision == 65)));
+					tp->cur_index = i;
+					tulip_select_media(dev, startup);
+					setup_done = 1;
+					break;
+				}
+		}
+		if ( ! setup_done) {
+			tp->csr6 = (dev->if_port & 1 ? 0x838E0000 : 0x82420000) | (tp->csr6 & 0x20ff);
+			if (tp->full_duplex)
+				tp->csr6 |= 0x0200;
+			iowrite32(1, ioaddr + CSR13);
+		}
+#if 0							/* Restart shouldn't be needed. */
+		iowrite32(tp->csr6 | RxOn, ioaddr + CSR6);
+		if (tulip_debug > 2)
+			netdev_dbg(dev, " Restarting Tx and Rx, CSR5 is %08x\n",
+				   ioread32(ioaddr + CSR5));
+#endif
+		tulip_start_rxtx(tp);
+		if (tulip_debug > 2)
+			netdev_dbg(dev, " Setting CSR6 %08x/%x CSR12 %08x\n",
+				   tp->csr6, ioread32(ioaddr + CSR6),
+				   ioread32(ioaddr + CSR12));
+	} else if ((tp->nwayset  &&  (csr5 & 0x08000000) &&
+		    (dev->if_port == 3  ||  dev->if_port == 5) &&
+		    (csr12 & 2) == 2) ||
+		   (tp->nway && (csr5 & (TPLnkFail)))) {
+		/* Link blew? Maybe restart NWay. */
+		del_timer_sync(&tp->timer);
+		t21142_start_nway(dev);
+		tp->timer.expires = RUN_AT(3*HZ);
+		add_timer(&tp->timer);
+	} else if (dev->if_port == 3  ||  dev->if_port == 5) {
+		if (tulip_debug > 1)
+			dev_info(&dev->dev, "21143 %s link beat %s\n",
+				 medianame[dev->if_port],
+				 (csr12 & 2) ? "failed" : "good");
+		if ((csr12 & 2)  &&  ! tp->medialock) {
+			del_timer_sync(&tp->timer);
+			t21142_start_nway(dev);
+			tp->timer.expires = RUN_AT(3*HZ);
+			add_timer(&tp->timer);
+		} else if (dev->if_port == 5)
+			iowrite32(csr14 & ~0x080, ioaddr + CSR14);
+	} else if (dev->if_port == 0  ||  dev->if_port == 4) {
+		if ((csr12 & 4) == 0)
+			dev_info(&dev->dev, "21143 10baseT link beat good\n");
+	} else if (!(csr12 & 4)) {		/* 10mbps link beat good. */
+		if (tulip_debug)
+			dev_info(&dev->dev, "21143 10mbps sensed media\n");
+		dev->if_port = 0;
+	} else if (tp->nwayset) {
+		if (tulip_debug)
+			dev_info(&dev->dev, "21143 using NWay-set %s, csr6 %08x\n",
+				 medianame[dev->if_port], tp->csr6);
+	} else {		/* 100mbps link beat good. */
+		if (tulip_debug)
+			dev_info(&dev->dev, "21143 100baseTx sensed media\n");
+		dev->if_port = 3;
+		tp->csr6 = 0x838E0000 | (tp->csr6 & 0x20ff);
+		iowrite32(0x0003FF7F, ioaddr + CSR14);
+		iowrite32(0x0301, ioaddr + CSR12);
+		tulip_restart_rxtx(tp);
+	}
+}
+
+
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
new file mode 100644
index 000000000000..1203be0436e2
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -0,0 +1,172 @@
+#
+# Tulip family network device configuration
+#
+
+config NET_TULIP
+	bool "DEC - Tulip devices"
+	depends on (PCI || EISA || CARDBUS)
+	---help---
+	  This selects the "Tulip" family of EISA/PCI network cards.
+
+if NET_TULIP
+
+config DE2104X
+	tristate "Early DECchip Tulip (dc2104x) PCI support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is developed for the SMC EtherPower series Ethernet
+	  cards and also works with cards based on the DECchip
+	  21040 (Tulip series) chips.  Some LinkSys PCI cards are
+	  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
+	  (smc9332dst), you can also try the driver for "Generic DECchip"
+	  cards, below.  However, most people with a network card of this type
+	  will say Y here.) Do read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called de2104x.
+
+config DE2104X_DSL
+	int "Descriptor Skip Length in 32 bit longwords"
+	depends on DE2104X
+	range 0 31
+	default 0
+	---help---
+	  Setting this value allows to align ring buffer descriptors into their
+	  own cache lines. Value of 4 corresponds to the typical 32 byte line
+	  (the descriptor is 16 bytes). This is necessary on systems that lack
+	  cache coherence, an example is PowerMac 5500. Otherwise 0 is safe.
+	  Default is 0, and range is 0 to 31.
+
+config TULIP
+	tristate "DECchip Tulip (dc2114x) PCI support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is developed for the SMC EtherPower series Ethernet
+	  cards and also works with cards based on the DECchip 
+	  21140 (Tulip series) chips.  Some LinkSys PCI cards are
+	  of this type.  (If your card is NOT SMC EtherPower 10/100 PCI
+	  (smc9332dst), you can also try the driver for "Generic DECchip"
+	  cards, above.  However, most people with a network card of this type
+	  will say Y here.) Do read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called tulip.
+
+config TULIP_MWI
+	bool "New bus configuration (EXPERIMENTAL)"
+	depends on TULIP && EXPERIMENTAL
+	---help---
+	  This configures your Tulip card specifically for the card and
+	  system cache line size type you are using.
+
+	  This is experimental code, not yet tested on many boards.
+
+	  If unsure, say N.
+
+config TULIP_MMIO
+	bool "Use PCI shared mem for NIC registers"
+	depends on TULIP
+	---help---
+	  Use PCI shared memory for the NIC registers, rather than going through
+	  the Tulip's PIO (programmed I/O ports).  Faster, but could produce
+	  obscure bugs if your mainboard has memory controller timing issues.
+	  If in doubt, say N.
+
+config TULIP_NAPI
+	bool "Use RX polling (NAPI)"
+	depends on TULIP
+	---help---
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  If in doubt, say N.
+
+config TULIP_NAPI_HW_MITIGATION
+	bool "Use Interrupt Mitigation"
+	depends on TULIP_NAPI
+	---help---
+	  Use HW to reduce RX interrupts. Not strictly necessary since NAPI
+	  reduces RX interrupts by itself. Interrupt mitigation reduces RX
+	  interrupts even at low levels of traffic at the cost of a small
+	  latency.
+
+	  If in doubt, say Y.
+
+config TULIP_DM910X
+	def_bool y
+	depends on TULIP && SPARC
+
+config DE4X5
+	tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
+	depends on (PCI || EISA)
+	select CRC32
+	---help---
+	  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
+	  These include the DE425, DE434, DE435, DE450 and DE500 models.  If
+	  you have a network card of this type, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. More specific
+	  information is contained in
+	  <file:Documentation/networking/de4x5.txt>.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called de4x5.
+
+config WINBOND_840
+	tristate "Winbond W89c840 Ethernet support"
+	depends on PCI
+	select CRC32
+	select NET_CORE
+	select MII
+	---help---
+	  This driver is for the Winbond W89c840 chip.  It also works with 
+	  the TX9882 chip on the Compex RL100-ATX board.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/drivers.html>.
+
+config DM9102
+	tristate "Davicom DM910x/DM980x support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
+	  Davicom (<http://www.davicom.com.tw/>).  If you have such a network
+	  (Ethernet) card, say Y.  Some information is contained in the file
+	  <file:Documentation/networking/dmfe.txt>.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called dmfe.
+
+config ULI526X
+	tristate "ULi M526x controller support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
+	  (<http://www.nvidia.com/page/uli_drivers.html>).
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called uli526x.
+	  
+config PCMCIA_XIRCOM
+	tristate "Xircom CardBus support"
+	depends on CARDBUS
+	---help---
+	  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
+	  It should work with most DEC 21*4*-based chips/ethercards, as well
+	  as with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
+	  ASIX.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called xircom_cb.  If unsure, say N.
+
+endif # NET_TULIP
diff --git a/drivers/net/ethernet/dec/tulip/Makefile b/drivers/net/ethernet/dec/tulip/Makefile
new file mode 100644
index 000000000000..5e8be38b45bb
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the Linux "Tulip" family network device drivers.
+#
+
+ccflags-$(CONFIG_NET_TULIP)	:= -DDEBUG
+
+obj-$(CONFIG_PCMCIA_XIRCOM)	+= xircom_cb.o
+obj-$(CONFIG_DM9102)		+= dmfe.o
+obj-$(CONFIG_WINBOND_840)	+= winbond-840.o
+obj-$(CONFIG_DE2104X)		+= de2104x.o
+obj-$(CONFIG_TULIP)		+= tulip.o
+obj-$(CONFIG_DE4X5)		+= de4x5.o
+obj-$(CONFIG_ULI526X)		+= uli526x.o
+
+# Declare multi-part drivers.
+
+tulip-objs			:= eeprom.o interrupt.o media.o \
+				   timer.o tulip_core.o		\
+				   21142.o pnic.o pnic2.o
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
new file mode 100644
index 000000000000..1427739d9a51
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -0,0 +1,2215 @@
+/* de2104x.c: A Linux PCI Ethernet driver for Intel/Digital 21040/1 chips. */
+/*
+	Copyright 2001,2003 Jeff Garzik <jgarzik@pobox.com>
+
+	Copyright 1994, 1995 Digital Equipment Corporation.	    [de4x5.c]
+	Written/copyright 1994-2001 by Donald Becker.		    [tulip.c]
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	See the file COPYING in this distribution for more information.
+
+	TODO, in rough priority order:
+	* Support forcing media type with a module parameter,
+	  like dl2k.c/sundance.c
+	* Constants (module parms?) for Rx work limit
+	* Complete reset on PciErr
+	* Jumbo frames / dev->change_mtu
+	* Adjust Rx FIFO threshold and Max Rx DMA burst on Rx FIFO error
+	* Adjust Tx FIFO threshold and Max Tx DMA burst on Tx FIFO error
+	* Implement Tx software interrupt mitigation via
+	  Tx descriptor bit
+
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME		"de2104x"
+#define DRV_VERSION		"0.7"
+#define DRV_RELDATE		"Mar 17, 2004"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/compiler.h>
+#include <linux/rtnetlink.h>
+#include <linux/crc32.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+/* These identify the driver base version and may not be removed. */
+static char version[] =
+"PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")";
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Intel/Digital 21040/1 series PCI Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = -1;
+module_param (debug, int, 0);
+MODULE_PARM_DESC (debug, "de2104x bitmapped message enable number");
+
+/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+        defined(CONFIG_SPARC) || defined(__ia64__) ||		   \
+        defined(__sh__) || defined(__mips__)
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak = 100;
+#endif
+module_param (rx_copybreak, int, 0);
+MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copied");
+
+#define DE_DEF_MSG_ENABLE	(NETIF_MSG_DRV		| \
+				 NETIF_MSG_PROBE 	| \
+				 NETIF_MSG_LINK		| \
+				 NETIF_MSG_IFDOWN	| \
+				 NETIF_MSG_IFUP		| \
+				 NETIF_MSG_RX_ERR	| \
+				 NETIF_MSG_TX_ERR)
+
+/* Descriptor skip length in 32 bit longwords. */
+#ifndef CONFIG_DE2104X_DSL
+#define DSL			0
+#else
+#define DSL			CONFIG_DE2104X_DSL
+#endif
+
+#define DE_RX_RING_SIZE		64
+#define DE_TX_RING_SIZE		64
+#define DE_RING_BYTES		\
+		((sizeof(struct de_desc) * DE_RX_RING_SIZE) +	\
+		(sizeof(struct de_desc) * DE_TX_RING_SIZE))
+#define NEXT_TX(N)		(((N) + 1) & (DE_TX_RING_SIZE - 1))
+#define NEXT_RX(N)		(((N) + 1) & (DE_RX_RING_SIZE - 1))
+#define TX_BUFFS_AVAIL(CP)					\
+	(((CP)->tx_tail <= (CP)->tx_head) ?			\
+	  (CP)->tx_tail + (DE_TX_RING_SIZE - 1) - (CP)->tx_head :	\
+	  (CP)->tx_tail - (CP)->tx_head - 1)
+
+#define PKT_BUF_SZ		1536	/* Size of each temporary Rx buffer.*/
+#define RX_OFFSET		2
+
+#define DE_SETUP_SKB		((struct sk_buff *) 1)
+#define DE_DUMMY_SKB		((struct sk_buff *) 2)
+#define DE_SETUP_FRAME_WORDS	96
+#define DE_EEPROM_WORDS		256
+#define DE_EEPROM_SIZE		(DE_EEPROM_WORDS * sizeof(u16))
+#define DE_MAX_MEDIA		5
+
+#define DE_MEDIA_TP_AUTO	0
+#define DE_MEDIA_BNC		1
+#define DE_MEDIA_AUI		2
+#define DE_MEDIA_TP		3
+#define DE_MEDIA_TP_FD		4
+#define DE_MEDIA_INVALID	DE_MAX_MEDIA
+#define DE_MEDIA_FIRST		0
+#define DE_MEDIA_LAST		(DE_MAX_MEDIA - 1)
+#define DE_AUI_BNC		(SUPPORTED_AUI | SUPPORTED_BNC)
+
+#define DE_TIMER_LINK		(60 * HZ)
+#define DE_TIMER_NO_LINK	(5 * HZ)
+
+#define DE_NUM_REGS		16
+#define DE_REGS_SIZE		(DE_NUM_REGS * sizeof(u32))
+#define DE_REGS_VER		1
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT		(6*HZ)
+
+/* This is a mysterious value that can be written to CSR11 in the 21040 (only)
+   to support a pre-NWay full-duplex signaling mechanism using short frames.
+   No one knows what it should be, but if left at its default value some
+   10base2(!) packets trigger a full-duplex-request interrupt. */
+#define FULL_DUPLEX_MAGIC	0x6969
+
+enum {
+	/* NIC registers */
+	BusMode			= 0x00,
+	TxPoll			= 0x08,
+	RxPoll			= 0x10,
+	RxRingAddr		= 0x18,
+	TxRingAddr		= 0x20,
+	MacStatus		= 0x28,
+	MacMode			= 0x30,
+	IntrMask		= 0x38,
+	RxMissed		= 0x40,
+	ROMCmd			= 0x48,
+	CSR11			= 0x58,
+	SIAStatus		= 0x60,
+	CSR13			= 0x68,
+	CSR14			= 0x70,
+	CSR15			= 0x78,
+	PCIPM			= 0x40,
+
+	/* BusMode bits */
+	CmdReset		= (1 << 0),
+	CacheAlign16		= 0x00008000,
+	BurstLen4		= 0x00000400,
+	DescSkipLen		= (DSL << 2),
+
+	/* Rx/TxPoll bits */
+	NormalTxPoll		= (1 << 0),
+	NormalRxPoll		= (1 << 0),
+
+	/* Tx/Rx descriptor status bits */
+	DescOwn			= (1 << 31),
+	RxError			= (1 << 15),
+	RxErrLong		= (1 << 7),
+	RxErrCRC		= (1 << 1),
+	RxErrFIFO		= (1 << 0),
+	RxErrRunt		= (1 << 11),
+	RxErrFrame		= (1 << 14),
+	RingEnd			= (1 << 25),
+	FirstFrag		= (1 << 29),
+	LastFrag		= (1 << 30),
+	TxError			= (1 << 15),
+	TxFIFOUnder		= (1 << 1),
+	TxLinkFail		= (1 << 2) | (1 << 10) | (1 << 11),
+	TxMaxCol		= (1 << 8),
+	TxOWC			= (1 << 9),
+	TxJabber		= (1 << 14),
+	SetupFrame		= (1 << 27),
+	TxSwInt			= (1 << 31),
+
+	/* MacStatus bits */
+	IntrOK			= (1 << 16),
+	IntrErr			= (1 << 15),
+	RxIntr			= (1 << 6),
+	RxEmpty			= (1 << 7),
+	TxIntr			= (1 << 0),
+	TxEmpty			= (1 << 2),
+	PciErr			= (1 << 13),
+	TxState			= (1 << 22) | (1 << 21) | (1 << 20),
+	RxState			= (1 << 19) | (1 << 18) | (1 << 17),
+	LinkFail		= (1 << 12),
+	LinkPass		= (1 << 4),
+	RxStopped		= (1 << 8),
+	TxStopped		= (1 << 1),
+
+	/* MacMode bits */
+	TxEnable		= (1 << 13),
+	RxEnable		= (1 << 1),
+	RxTx			= TxEnable | RxEnable,
+	FullDuplex		= (1 << 9),
+	AcceptAllMulticast	= (1 << 7),
+	AcceptAllPhys		= (1 << 6),
+	BOCnt			= (1 << 5),
+	MacModeClear		= (1<<12) | (1<<11) | (1<<10) | (1<<8) | (1<<3) |
+				  RxTx | BOCnt | AcceptAllPhys | AcceptAllMulticast,
+
+	/* ROMCmd bits */
+	EE_SHIFT_CLK		= 0x02,	/* EEPROM shift clock. */
+	EE_CS			= 0x01,	/* EEPROM chip select. */
+	EE_DATA_WRITE		= 0x04,	/* Data from the Tulip to EEPROM. */
+	EE_WRITE_0		= 0x01,
+	EE_WRITE_1		= 0x05,
+	EE_DATA_READ		= 0x08,	/* Data from the EEPROM chip. */
+	EE_ENB			= (0x4800 | EE_CS),
+
+	/* The EEPROM commands include the alway-set leading bit. */
+	EE_READ_CMD		= 6,
+
+	/* RxMissed bits */
+	RxMissedOver		= (1 << 16),
+	RxMissedMask		= 0xffff,
+
+	/* SROM-related bits */
+	SROMC0InfoLeaf		= 27,
+	MediaBlockMask		= 0x3f,
+	MediaCustomCSRs		= (1 << 6),
+
+	/* PCIPM bits */
+	PM_Sleep		= (1 << 31),
+	PM_Snooze		= (1 << 30),
+	PM_Mask			= PM_Sleep | PM_Snooze,
+
+	/* SIAStatus bits */
+	NWayState		= (1 << 14) | (1 << 13) | (1 << 12),
+	NWayRestart		= (1 << 12),
+	NonselPortActive	= (1 << 9),
+	SelPortActive		= (1 << 8),
+	LinkFailStatus		= (1 << 2),
+	NetCxnErr		= (1 << 1),
+};
+
+static const u32 de_intr_mask =
+	IntrOK | IntrErr | RxIntr | RxEmpty | TxIntr | TxEmpty |
+	LinkPass | LinkFail | PciErr;
+
+/*
+ * Set the programmable burst length to 4 longwords for all:
+ * DMA errors result without these values. Cache align 16 long.
+ */
+static const u32 de_bus_mode = CacheAlign16 | BurstLen4 | DescSkipLen;
+
+struct de_srom_media_block {
+	u8			opts;
+	u16			csr13;
+	u16			csr14;
+	u16			csr15;
+} __packed;
+
+struct de_srom_info_leaf {
+	u16			default_media;
+	u8			n_blocks;
+	u8			unused;
+} __packed;
+
+struct de_desc {
+	__le32			opts1;
+	__le32			opts2;
+	__le32			addr1;
+	__le32			addr2;
+#if DSL
+	__le32			skip[DSL];
+#endif
+};
+
+struct media_info {
+	u16			type;	/* DE_MEDIA_xxx */
+	u16			csr13;
+	u16			csr14;
+	u16			csr15;
+};
+
+struct ring_info {
+	struct sk_buff		*skb;
+	dma_addr_t		mapping;
+};
+
+struct de_private {
+	unsigned		tx_head;
+	unsigned		tx_tail;
+	unsigned		rx_tail;
+
+	void			__iomem *regs;
+	struct net_device	*dev;
+	spinlock_t		lock;
+
+	struct de_desc		*rx_ring;
+	struct de_desc		*tx_ring;
+	struct ring_info	tx_skb[DE_TX_RING_SIZE];
+	struct ring_info	rx_skb[DE_RX_RING_SIZE];
+	unsigned		rx_buf_sz;
+	dma_addr_t		ring_dma;
+
+	u32			msg_enable;
+
+	struct net_device_stats net_stats;
+
+	struct pci_dev		*pdev;
+
+	u16			setup_frame[DE_SETUP_FRAME_WORDS];
+
+	u32			media_type;
+	u32			media_supported;
+	u32			media_advertise;
+	struct media_info	media[DE_MAX_MEDIA];
+	struct timer_list	media_timer;
+
+	u8			*ee_data;
+	unsigned		board_idx;
+	unsigned		de21040 : 1;
+	unsigned		media_lock : 1;
+};
+
+
+static void de_set_rx_mode (struct net_device *dev);
+static void de_tx (struct de_private *de);
+static void de_clean_rings (struct de_private *de);
+static void de_media_interrupt (struct de_private *de, u32 status);
+static void de21040_media_timer (unsigned long data);
+static void de21041_media_timer (unsigned long data);
+static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media);
+
+
+static DEFINE_PCI_DEVICE_TABLE(de_pci_tbl) = {
+	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, de_pci_tbl);
+
+static const char * const media_name[DE_MAX_MEDIA] = {
+	"10baseT auto",
+	"BNC",
+	"AUI",
+	"10baseT-HD",
+	"10baseT-FD"
+};
+
+/* 21040 transceiver register settings:
+ * TP AUTO(unused), BNC(unused), AUI, TP, TP FD*/
+static u16 t21040_csr13[] = { 0, 0, 0x8F09, 0x8F01, 0x8F01, };
+static u16 t21040_csr14[] = { 0, 0, 0x0705, 0xFFFF, 0xFFFD, };
+static u16 t21040_csr15[] = { 0, 0, 0x0006, 0x0000, 0x0000, };
+
+/* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/
+static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, };
+static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, };
+/* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */
+static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x7F3F, 0x7F3D, };
+static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };
+
+
+#define dr32(reg)	ioread32(de->regs + (reg))
+#define dw32(reg, val)	iowrite32((val), de->regs + (reg))
+
+
+static void de_rx_err_acct (struct de_private *de, unsigned rx_tail,
+			    u32 status, u32 len)
+{
+	netif_dbg(de, rx_err, de->dev,
+		  "rx err, slot %d status 0x%x len %d\n",
+		  rx_tail, status, len);
+
+	if ((status & 0x38000300) != 0x0300) {
+		/* Ingore earlier buffers. */
+		if ((status & 0xffff) != 0x7fff) {
+			netif_warn(de, rx_err, de->dev,
+				   "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+				   status);
+			de->net_stats.rx_length_errors++;
+		}
+	} else if (status & RxError) {
+		/* There was a fatal error. */
+		de->net_stats.rx_errors++; /* end of a packet.*/
+		if (status & 0x0890) de->net_stats.rx_length_errors++;
+		if (status & RxErrCRC) de->net_stats.rx_crc_errors++;
+		if (status & RxErrFIFO) de->net_stats.rx_fifo_errors++;
+	}
+}
+
+static void de_rx (struct de_private *de)
+{
+	unsigned rx_tail = de->rx_tail;
+	unsigned rx_work = DE_RX_RING_SIZE;
+	unsigned drop = 0;
+	int rc;
+
+	while (--rx_work) {
+		u32 status, len;
+		dma_addr_t mapping;
+		struct sk_buff *skb, *copy_skb;
+		unsigned copying_skb, buflen;
+
+		skb = de->rx_skb[rx_tail].skb;
+		BUG_ON(!skb);
+		rmb();
+		status = le32_to_cpu(de->rx_ring[rx_tail].opts1);
+		if (status & DescOwn)
+			break;
+
+		len = ((status >> 16) & 0x7ff) - 4;
+		mapping = de->rx_skb[rx_tail].mapping;
+
+		if (unlikely(drop)) {
+			de->net_stats.rx_dropped++;
+			goto rx_next;
+		}
+
+		if (unlikely((status & 0x38008300) != 0x0300)) {
+			de_rx_err_acct(de, rx_tail, status, len);
+			goto rx_next;
+		}
+
+		copying_skb = (len <= rx_copybreak);
+
+		netif_dbg(de, rx_status, de->dev,
+			  "rx slot %d status 0x%x len %d copying? %d\n",
+			  rx_tail, status, len, copying_skb);
+
+		buflen = copying_skb ? (len + RX_OFFSET) : de->rx_buf_sz;
+		copy_skb = dev_alloc_skb (buflen);
+		if (unlikely(!copy_skb)) {
+			de->net_stats.rx_dropped++;
+			drop = 1;
+			rx_work = 100;
+			goto rx_next;
+		}
+
+		if (!copying_skb) {
+			pci_unmap_single(de->pdev, mapping,
+					 buflen, PCI_DMA_FROMDEVICE);
+			skb_put(skb, len);
+
+			mapping =
+			de->rx_skb[rx_tail].mapping =
+				pci_map_single(de->pdev, copy_skb->data,
+					       buflen, PCI_DMA_FROMDEVICE);
+			de->rx_skb[rx_tail].skb = copy_skb;
+		} else {
+			pci_dma_sync_single_for_cpu(de->pdev, mapping, len, PCI_DMA_FROMDEVICE);
+			skb_reserve(copy_skb, RX_OFFSET);
+			skb_copy_from_linear_data(skb, skb_put(copy_skb, len),
+						  len);
+			pci_dma_sync_single_for_device(de->pdev, mapping, len, PCI_DMA_FROMDEVICE);
+
+			/* We'll reuse the original ring buffer. */
+			skb = copy_skb;
+		}
+
+		skb->protocol = eth_type_trans (skb, de->dev);
+
+		de->net_stats.rx_packets++;
+		de->net_stats.rx_bytes += skb->len;
+		rc = netif_rx (skb);
+		if (rc == NET_RX_DROP)
+			drop = 1;
+
+rx_next:
+		if (rx_tail == (DE_RX_RING_SIZE - 1))
+			de->rx_ring[rx_tail].opts2 =
+				cpu_to_le32(RingEnd | de->rx_buf_sz);
+		else
+			de->rx_ring[rx_tail].opts2 = cpu_to_le32(de->rx_buf_sz);
+		de->rx_ring[rx_tail].addr1 = cpu_to_le32(mapping);
+		wmb();
+		de->rx_ring[rx_tail].opts1 = cpu_to_le32(DescOwn);
+		rx_tail = NEXT_RX(rx_tail);
+	}
+
+	if (!rx_work)
+		netdev_warn(de->dev, "rx work limit reached\n");
+
+	de->rx_tail = rx_tail;
+}
+
+static irqreturn_t de_interrupt (int irq, void *dev_instance)
+{
+	struct net_device *dev = dev_instance;
+	struct de_private *de = netdev_priv(dev);
+	u32 status;
+
+	status = dr32(MacStatus);
+	if ((!(status & (IntrOK|IntrErr))) || (status == 0xFFFF))
+		return IRQ_NONE;
+
+	netif_dbg(de, intr, dev, "intr, status %08x mode %08x desc %u/%u/%u\n",
+		  status, dr32(MacMode),
+		  de->rx_tail, de->tx_head, de->tx_tail);
+
+	dw32(MacStatus, status);
+
+	if (status & (RxIntr | RxEmpty)) {
+		de_rx(de);
+		if (status & RxEmpty)
+			dw32(RxPoll, NormalRxPoll);
+	}
+
+	spin_lock(&de->lock);
+
+	if (status & (TxIntr | TxEmpty))
+		de_tx(de);
+
+	if (status & (LinkPass | LinkFail))
+		de_media_interrupt(de, status);
+
+	spin_unlock(&de->lock);
+
+	if (status & PciErr) {
+		u16 pci_status;
+
+		pci_read_config_word(de->pdev, PCI_STATUS, &pci_status);
+		pci_write_config_word(de->pdev, PCI_STATUS, pci_status);
+		netdev_err(de->dev,
+			   "PCI bus error, status=%08x, PCI status=%04x\n",
+			   status, pci_status);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void de_tx (struct de_private *de)
+{
+	unsigned tx_head = de->tx_head;
+	unsigned tx_tail = de->tx_tail;
+
+	while (tx_tail != tx_head) {
+		struct sk_buff *skb;
+		u32 status;
+
+		rmb();
+		status = le32_to_cpu(de->tx_ring[tx_tail].opts1);
+		if (status & DescOwn)
+			break;
+
+		skb = de->tx_skb[tx_tail].skb;
+		BUG_ON(!skb);
+		if (unlikely(skb == DE_DUMMY_SKB))
+			goto next;
+
+		if (unlikely(skb == DE_SETUP_SKB)) {
+			pci_unmap_single(de->pdev, de->tx_skb[tx_tail].mapping,
+					 sizeof(de->setup_frame), PCI_DMA_TODEVICE);
+			goto next;
+		}
+
+		pci_unmap_single(de->pdev, de->tx_skb[tx_tail].mapping,
+				 skb->len, PCI_DMA_TODEVICE);
+
+		if (status & LastFrag) {
+			if (status & TxError) {
+				netif_dbg(de, tx_err, de->dev,
+					  "tx err, status 0x%x\n",
+					  status);
+				de->net_stats.tx_errors++;
+				if (status & TxOWC)
+					de->net_stats.tx_window_errors++;
+				if (status & TxMaxCol)
+					de->net_stats.tx_aborted_errors++;
+				if (status & TxLinkFail)
+					de->net_stats.tx_carrier_errors++;
+				if (status & TxFIFOUnder)
+					de->net_stats.tx_fifo_errors++;
+			} else {
+				de->net_stats.tx_packets++;
+				de->net_stats.tx_bytes += skb->len;
+				netif_dbg(de, tx_done, de->dev,
+					  "tx done, slot %d\n", tx_tail);
+			}
+			dev_kfree_skb_irq(skb);
+		}
+
+next:
+		de->tx_skb[tx_tail].skb = NULL;
+
+		tx_tail = NEXT_TX(tx_tail);
+	}
+
+	de->tx_tail = tx_tail;
+
+	if (netif_queue_stopped(de->dev) && (TX_BUFFS_AVAIL(de) > (DE_TX_RING_SIZE / 4)))
+		netif_wake_queue(de->dev);
+}
+
+static netdev_tx_t de_start_xmit (struct sk_buff *skb,
+					struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	unsigned int entry, tx_free;
+	u32 mapping, len, flags = FirstFrag | LastFrag;
+	struct de_desc *txd;
+
+	spin_lock_irq(&de->lock);
+
+	tx_free = TX_BUFFS_AVAIL(de);
+	if (tx_free == 0) {
+		netif_stop_queue(dev);
+		spin_unlock_irq(&de->lock);
+		return NETDEV_TX_BUSY;
+	}
+	tx_free--;
+
+	entry = de->tx_head;
+
+	txd = &de->tx_ring[entry];
+
+	len = skb->len;
+	mapping = pci_map_single(de->pdev, skb->data, len, PCI_DMA_TODEVICE);
+	if (entry == (DE_TX_RING_SIZE - 1))
+		flags |= RingEnd;
+	if (!tx_free || (tx_free == (DE_TX_RING_SIZE / 2)))
+		flags |= TxSwInt;
+	flags |= len;
+	txd->opts2 = cpu_to_le32(flags);
+	txd->addr1 = cpu_to_le32(mapping);
+
+	de->tx_skb[entry].skb = skb;
+	de->tx_skb[entry].mapping = mapping;
+	wmb();
+
+	txd->opts1 = cpu_to_le32(DescOwn);
+	wmb();
+
+	de->tx_head = NEXT_TX(entry);
+	netif_dbg(de, tx_queued, dev, "tx queued, slot %d, skblen %d\n",
+		  entry, skb->len);
+
+	if (tx_free == 0)
+		netif_stop_queue(dev);
+
+	spin_unlock_irq(&de->lock);
+
+	/* Trigger an immediate transmit demand. */
+	dw32(TxPoll, NormalTxPoll);
+
+	return NETDEV_TX_OK;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+   Note that we only use exclusion around actually queueing the
+   new frame, not around filling de->setup_frame.  This is non-deterministic
+   when re-entered but still correct. */
+
+#undef set_bit_le
+#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0)
+
+static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	u16 hash_table[32];
+	struct netdev_hw_addr *ha;
+	int i;
+	u16 *eaddrs;
+
+	memset(hash_table, 0, sizeof(hash_table));
+	set_bit_le(255, hash_table); 			/* Broadcast entry */
+	/* This should work on big-endian machines as well. */
+	netdev_for_each_mc_addr(ha, dev) {
+		int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff;
+
+		set_bit_le(index, hash_table);
+	}
+
+	for (i = 0; i < 32; i++) {
+		*setup_frm++ = hash_table[i];
+		*setup_frm++ = hash_table[i];
+	}
+	setup_frm = &de->setup_frame[13*6];
+
+	/* Fill the final entry with our physical address. */
+	eaddrs = (u16 *)dev->dev_addr;
+	*setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+	*setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+	*setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+}
+
+static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+	u16 *eaddrs;
+
+	/* We have <= 14 addresses so we can use the wonderful
+	   16 address perfect filtering of the Tulip. */
+	netdev_for_each_mc_addr(ha, dev) {
+		eaddrs = (u16 *) ha->addr;
+		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+	}
+	/* Fill the unused entries with the broadcast address. */
+	memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
+	setup_frm = &de->setup_frame[15*6];
+
+	/* Fill the final entry with our physical address. */
+	eaddrs = (u16 *)dev->dev_addr;
+	*setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+	*setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+	*setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+}
+
+
+static void __de_set_rx_mode (struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	u32 macmode;
+	unsigned int entry;
+	u32 mapping;
+	struct de_desc *txd;
+	struct de_desc *dummy_txd = NULL;
+
+	macmode = dr32(MacMode) & ~(AcceptAllMulticast | AcceptAllPhys);
+
+	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
+		macmode |= AcceptAllMulticast | AcceptAllPhys;
+		goto out;
+	}
+
+	if ((netdev_mc_count(dev) > 1000) || (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter well -- accept all multicasts. */
+		macmode |= AcceptAllMulticast;
+		goto out;
+	}
+
+	/* Note that only the low-address shortword of setup_frame is valid!
+	   The values are doubled for big-endian architectures. */
+	if (netdev_mc_count(dev) > 14)	/* Must use a multicast hash table. */
+		build_setup_frame_hash (de->setup_frame, dev);
+	else
+		build_setup_frame_perfect (de->setup_frame, dev);
+
+	/*
+	 * Now add this frame to the Tx list.
+	 */
+
+	entry = de->tx_head;
+
+	/* Avoid a chip errata by prefixing a dummy entry. */
+	if (entry != 0) {
+		de->tx_skb[entry].skb = DE_DUMMY_SKB;
+
+		dummy_txd = &de->tx_ring[entry];
+		dummy_txd->opts2 = (entry == (DE_TX_RING_SIZE - 1)) ?
+				   cpu_to_le32(RingEnd) : 0;
+		dummy_txd->addr1 = 0;
+
+		/* Must set DescOwned later to avoid race with chip */
+
+		entry = NEXT_TX(entry);
+	}
+
+	de->tx_skb[entry].skb = DE_SETUP_SKB;
+	de->tx_skb[entry].mapping = mapping =
+	    pci_map_single (de->pdev, de->setup_frame,
+			    sizeof (de->setup_frame), PCI_DMA_TODEVICE);
+
+	/* Put the setup frame on the Tx list. */
+	txd = &de->tx_ring[entry];
+	if (entry == (DE_TX_RING_SIZE - 1))
+		txd->opts2 = cpu_to_le32(SetupFrame | RingEnd | sizeof (de->setup_frame));
+	else
+		txd->opts2 = cpu_to_le32(SetupFrame | sizeof (de->setup_frame));
+	txd->addr1 = cpu_to_le32(mapping);
+	wmb();
+
+	txd->opts1 = cpu_to_le32(DescOwn);
+	wmb();
+
+	if (dummy_txd) {
+		dummy_txd->opts1 = cpu_to_le32(DescOwn);
+		wmb();
+	}
+
+	de->tx_head = NEXT_TX(entry);
+
+	if (TX_BUFFS_AVAIL(de) == 0)
+		netif_stop_queue(dev);
+
+	/* Trigger an immediate transmit demand. */
+	dw32(TxPoll, NormalTxPoll);
+
+out:
+	if (macmode != dr32(MacMode))
+		dw32(MacMode, macmode);
+}
+
+static void de_set_rx_mode (struct net_device *dev)
+{
+	unsigned long flags;
+	struct de_private *de = netdev_priv(dev);
+
+	spin_lock_irqsave (&de->lock, flags);
+	__de_set_rx_mode(dev);
+	spin_unlock_irqrestore (&de->lock, flags);
+}
+
+static inline void de_rx_missed(struct de_private *de, u32 rx_missed)
+{
+	if (unlikely(rx_missed & RxMissedOver))
+		de->net_stats.rx_missed_errors += RxMissedMask;
+	else
+		de->net_stats.rx_missed_errors += (rx_missed & RxMissedMask);
+}
+
+static void __de_get_stats(struct de_private *de)
+{
+	u32 tmp = dr32(RxMissed); /* self-clearing */
+
+	de_rx_missed(de, tmp);
+}
+
+static struct net_device_stats *de_get_stats(struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	/* The chip only need report frame silently dropped. */
+	spin_lock_irq(&de->lock);
+ 	if (netif_running(dev) && netif_device_present(dev))
+ 		__de_get_stats(de);
+	spin_unlock_irq(&de->lock);
+
+	return &de->net_stats;
+}
+
+static inline int de_is_running (struct de_private *de)
+{
+	return (dr32(MacStatus) & (RxState | TxState)) ? 1 : 0;
+}
+
+static void de_stop_rxtx (struct de_private *de)
+{
+	u32 macmode;
+	unsigned int i = 1300/100;
+
+	macmode = dr32(MacMode);
+	if (macmode & RxTx) {
+		dw32(MacMode, macmode & ~RxTx);
+		dr32(MacMode);
+	}
+
+	/* wait until in-flight frame completes.
+	 * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
+	 * Typically expect this loop to end in < 50 us on 100BT.
+	 */
+	while (--i) {
+		if (!de_is_running(de))
+			return;
+		udelay(100);
+	}
+
+	netdev_warn(de->dev, "timeout expired, stopping DMA\n");
+}
+
+static inline void de_start_rxtx (struct de_private *de)
+{
+	u32 macmode;
+
+	macmode = dr32(MacMode);
+	if ((macmode & RxTx) != RxTx) {
+		dw32(MacMode, macmode | RxTx);
+		dr32(MacMode);
+	}
+}
+
+static void de_stop_hw (struct de_private *de)
+{
+
+	udelay(5);
+	dw32(IntrMask, 0);
+
+	de_stop_rxtx(de);
+
+	dw32(MacStatus, dr32(MacStatus));
+
+	udelay(10);
+
+	de->rx_tail = 0;
+	de->tx_head = de->tx_tail = 0;
+}
+
+static void de_link_up(struct de_private *de)
+{
+	if (!netif_carrier_ok(de->dev)) {
+		netif_carrier_on(de->dev);
+		netif_info(de, link, de->dev, "link up, media %s\n",
+			   media_name[de->media_type]);
+	}
+}
+
+static void de_link_down(struct de_private *de)
+{
+	if (netif_carrier_ok(de->dev)) {
+		netif_carrier_off(de->dev);
+		netif_info(de, link, de->dev, "link down\n");
+	}
+}
+
+static void de_set_media (struct de_private *de)
+{
+	unsigned media = de->media_type;
+	u32 macmode = dr32(MacMode);
+
+	if (de_is_running(de))
+		netdev_warn(de->dev, "chip is running while changing media!\n");
+
+	if (de->de21040)
+		dw32(CSR11, FULL_DUPLEX_MAGIC);
+	dw32(CSR13, 0); /* Reset phy */
+	dw32(CSR14, de->media[media].csr14);
+	dw32(CSR15, de->media[media].csr15);
+	dw32(CSR13, de->media[media].csr13);
+
+	/* must delay 10ms before writing to other registers,
+	 * especially CSR6
+	 */
+	mdelay(10);
+
+	if (media == DE_MEDIA_TP_FD)
+		macmode |= FullDuplex;
+	else
+		macmode &= ~FullDuplex;
+
+	netif_info(de, link, de->dev, "set link %s\n", media_name[media]);
+	netif_info(de, hw, de->dev, "mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n",
+		   dr32(MacMode), dr32(SIAStatus),
+		   dr32(CSR13), dr32(CSR14), dr32(CSR15));
+	netif_info(de, hw, de->dev, "set mode 0x%x, set sia 0x%x,0x%x,0x%x\n",
+		   macmode, de->media[media].csr13,
+		   de->media[media].csr14, de->media[media].csr15);
+	if (macmode != dr32(MacMode))
+		dw32(MacMode, macmode);
+}
+
+static void de_next_media (struct de_private *de, const u32 *media,
+			   unsigned int n_media)
+{
+	unsigned int i;
+
+	for (i = 0; i < n_media; i++) {
+		if (de_ok_to_advertise(de, media[i])) {
+			de->media_type = media[i];
+			return;
+		}
+	}
+}
+
+static void de21040_media_timer (unsigned long data)
+{
+	struct de_private *de = (struct de_private *) data;
+	struct net_device *dev = de->dev;
+	u32 status = dr32(SIAStatus);
+	unsigned int carrier;
+	unsigned long flags;
+
+	carrier = (status & NetCxnErr) ? 0 : 1;
+
+	if (carrier) {
+		if (de->media_type != DE_MEDIA_AUI && (status & LinkFailStatus))
+			goto no_link_yet;
+
+		de->media_timer.expires = jiffies + DE_TIMER_LINK;
+		add_timer(&de->media_timer);
+		if (!netif_carrier_ok(dev))
+			de_link_up(de);
+		else
+			netif_info(de, timer, dev, "%s link ok, status %x\n",
+				   media_name[de->media_type], status);
+		return;
+	}
+
+	de_link_down(de);
+
+	if (de->media_lock)
+		return;
+
+	if (de->media_type == DE_MEDIA_AUI) {
+		static const u32 next_state = DE_MEDIA_TP;
+		de_next_media(de, &next_state, 1);
+	} else {
+		static const u32 next_state = DE_MEDIA_AUI;
+		de_next_media(de, &next_state, 1);
+	}
+
+	spin_lock_irqsave(&de->lock, flags);
+	de_stop_rxtx(de);
+	spin_unlock_irqrestore(&de->lock, flags);
+	de_set_media(de);
+	de_start_rxtx(de);
+
+no_link_yet:
+	de->media_timer.expires = jiffies + DE_TIMER_NO_LINK;
+	add_timer(&de->media_timer);
+
+	netif_info(de, timer, dev, "no link, trying media %s, status %x\n",
+		   media_name[de->media_type], status);
+}
+
+static unsigned int de_ok_to_advertise (struct de_private *de, u32 new_media)
+{
+	switch (new_media) {
+	case DE_MEDIA_TP_AUTO:
+		if (!(de->media_advertise & ADVERTISED_Autoneg))
+			return 0;
+		if (!(de->media_advertise & (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full)))
+			return 0;
+		break;
+	case DE_MEDIA_BNC:
+		if (!(de->media_advertise & ADVERTISED_BNC))
+			return 0;
+		break;
+	case DE_MEDIA_AUI:
+		if (!(de->media_advertise & ADVERTISED_AUI))
+			return 0;
+		break;
+	case DE_MEDIA_TP:
+		if (!(de->media_advertise & ADVERTISED_10baseT_Half))
+			return 0;
+		break;
+	case DE_MEDIA_TP_FD:
+		if (!(de->media_advertise & ADVERTISED_10baseT_Full))
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+
+static void de21041_media_timer (unsigned long data)
+{
+	struct de_private *de = (struct de_private *) data;
+	struct net_device *dev = de->dev;
+	u32 status = dr32(SIAStatus);
+	unsigned int carrier;
+	unsigned long flags;
+
+	/* clear port active bits */
+	dw32(SIAStatus, NonselPortActive | SelPortActive);
+
+	carrier = (status & NetCxnErr) ? 0 : 1;
+
+	if (carrier) {
+		if ((de->media_type == DE_MEDIA_TP_AUTO ||
+		     de->media_type == DE_MEDIA_TP ||
+		     de->media_type == DE_MEDIA_TP_FD) &&
+		    (status & LinkFailStatus))
+			goto no_link_yet;
+
+		de->media_timer.expires = jiffies + DE_TIMER_LINK;
+		add_timer(&de->media_timer);
+		if (!netif_carrier_ok(dev))
+			de_link_up(de);
+		else
+			netif_info(de, timer, dev,
+				   "%s link ok, mode %x status %x\n",
+				   media_name[de->media_type],
+				   dr32(MacMode), status);
+		return;
+	}
+
+	de_link_down(de);
+
+	/* if media type locked, don't switch media */
+	if (de->media_lock)
+		goto set_media;
+
+	/* if activity detected, use that as hint for new media type */
+	if (status & NonselPortActive) {
+		unsigned int have_media = 1;
+
+		/* if AUI/BNC selected, then activity is on TP port */
+		if (de->media_type == DE_MEDIA_AUI ||
+		    de->media_type == DE_MEDIA_BNC) {
+			if (de_ok_to_advertise(de, DE_MEDIA_TP_AUTO))
+				de->media_type = DE_MEDIA_TP_AUTO;
+			else
+				have_media = 0;
+		}
+
+		/* TP selected.  If there is only TP and BNC, then it's BNC */
+		else if (((de->media_supported & DE_AUI_BNC) == SUPPORTED_BNC) &&
+			 de_ok_to_advertise(de, DE_MEDIA_BNC))
+			de->media_type = DE_MEDIA_BNC;
+
+		/* TP selected.  If there is only TP and AUI, then it's AUI */
+		else if (((de->media_supported & DE_AUI_BNC) == SUPPORTED_AUI) &&
+			 de_ok_to_advertise(de, DE_MEDIA_AUI))
+			de->media_type = DE_MEDIA_AUI;
+
+		/* otherwise, ignore the hint */
+		else
+			have_media = 0;
+
+		if (have_media)
+			goto set_media;
+	}
+
+	/*
+	 * Absent or ambiguous activity hint, move to next advertised
+	 * media state.  If de->media_type is left unchanged, this
+	 * simply resets the PHY and reloads the current media settings.
+	 */
+	if (de->media_type == DE_MEDIA_AUI) {
+		static const u32 next_states[] = {
+			DE_MEDIA_BNC, DE_MEDIA_TP_AUTO
+		};
+		de_next_media(de, next_states, ARRAY_SIZE(next_states));
+	} else if (de->media_type == DE_MEDIA_BNC) {
+		static const u32 next_states[] = {
+			DE_MEDIA_TP_AUTO, DE_MEDIA_AUI
+		};
+		de_next_media(de, next_states, ARRAY_SIZE(next_states));
+	} else {
+		static const u32 next_states[] = {
+			DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO
+		};
+		de_next_media(de, next_states, ARRAY_SIZE(next_states));
+	}
+
+set_media:
+	spin_lock_irqsave(&de->lock, flags);
+	de_stop_rxtx(de);
+	spin_unlock_irqrestore(&de->lock, flags);
+	de_set_media(de);
+	de_start_rxtx(de);
+
+no_link_yet:
+	de->media_timer.expires = jiffies + DE_TIMER_NO_LINK;
+	add_timer(&de->media_timer);
+
+	netif_info(de, timer, dev, "no link, trying media %s, status %x\n",
+		   media_name[de->media_type], status);
+}
+
+static void de_media_interrupt (struct de_private *de, u32 status)
+{
+	if (status & LinkPass) {
+		/* Ignore if current media is AUI or BNC and we can't use TP */
+		if ((de->media_type == DE_MEDIA_AUI ||
+		     de->media_type == DE_MEDIA_BNC) &&
+		    (de->media_lock ||
+		     !de_ok_to_advertise(de, DE_MEDIA_TP_AUTO)))
+			return;
+		/* If current media is not TP, change it to TP */
+		if ((de->media_type == DE_MEDIA_AUI ||
+		     de->media_type == DE_MEDIA_BNC)) {
+			de->media_type = DE_MEDIA_TP_AUTO;
+			de_stop_rxtx(de);
+			de_set_media(de);
+			de_start_rxtx(de);
+		}
+		de_link_up(de);
+		mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK);
+		return;
+	}
+
+	BUG_ON(!(status & LinkFail));
+	/* Mark the link as down only if current media is TP */
+	if (netif_carrier_ok(de->dev) && de->media_type != DE_MEDIA_AUI &&
+	    de->media_type != DE_MEDIA_BNC) {
+		de_link_down(de);
+		mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK);
+	}
+}
+
+static int de_reset_mac (struct de_private *de)
+{
+	u32 status, tmp;
+
+	/*
+	 * Reset MAC.  de4x5.c and tulip.c examined for "advice"
+	 * in this area.
+	 */
+
+	if (dr32(BusMode) == 0xffffffff)
+		return -EBUSY;
+
+	/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
+	dw32 (BusMode, CmdReset);
+	mdelay (1);
+
+	dw32 (BusMode, de_bus_mode);
+	mdelay (1);
+
+	for (tmp = 0; tmp < 5; tmp++) {
+		dr32 (BusMode);
+		mdelay (1);
+	}
+
+	mdelay (1);
+
+	status = dr32(MacStatus);
+	if (status & (RxState | TxState))
+		return -EBUSY;
+	if (status == 0xffffffff)
+		return -ENODEV;
+	return 0;
+}
+
+static void de_adapter_wake (struct de_private *de)
+{
+	u32 pmctl;
+
+	if (de->de21040)
+		return;
+
+	pci_read_config_dword(de->pdev, PCIPM, &pmctl);
+	if (pmctl & PM_Mask) {
+		pmctl &= ~PM_Mask;
+		pci_write_config_dword(de->pdev, PCIPM, pmctl);
+
+		/* de4x5.c delays, so we do too */
+		msleep(10);
+	}
+}
+
+static void de_adapter_sleep (struct de_private *de)
+{
+	u32 pmctl;
+
+	if (de->de21040)
+		return;
+
+	dw32(CSR13, 0); /* Reset phy */
+	pci_read_config_dword(de->pdev, PCIPM, &pmctl);
+	pmctl |= PM_Sleep;
+	pci_write_config_dword(de->pdev, PCIPM, pmctl);
+}
+
+static int de_init_hw (struct de_private *de)
+{
+	struct net_device *dev = de->dev;
+	u32 macmode;
+	int rc;
+
+	de_adapter_wake(de);
+
+	macmode = dr32(MacMode) & ~MacModeClear;
+
+	rc = de_reset_mac(de);
+	if (rc)
+		return rc;
+
+	de_set_media(de); /* reset phy */
+
+	dw32(RxRingAddr, de->ring_dma);
+	dw32(TxRingAddr, de->ring_dma + (sizeof(struct de_desc) * DE_RX_RING_SIZE));
+
+	dw32(MacMode, RxTx | macmode);
+
+	dr32(RxMissed); /* self-clearing */
+
+	dw32(IntrMask, de_intr_mask);
+
+	de_set_rx_mode(dev);
+
+	return 0;
+}
+
+static int de_refill_rx (struct de_private *de)
+{
+	unsigned i;
+
+	for (i = 0; i < DE_RX_RING_SIZE; i++) {
+		struct sk_buff *skb;
+
+		skb = dev_alloc_skb(de->rx_buf_sz);
+		if (!skb)
+			goto err_out;
+
+		skb->dev = de->dev;
+
+		de->rx_skb[i].mapping = pci_map_single(de->pdev,
+			skb->data, de->rx_buf_sz, PCI_DMA_FROMDEVICE);
+		de->rx_skb[i].skb = skb;
+
+		de->rx_ring[i].opts1 = cpu_to_le32(DescOwn);
+		if (i == (DE_RX_RING_SIZE - 1))
+			de->rx_ring[i].opts2 =
+				cpu_to_le32(RingEnd | de->rx_buf_sz);
+		else
+			de->rx_ring[i].opts2 = cpu_to_le32(de->rx_buf_sz);
+		de->rx_ring[i].addr1 = cpu_to_le32(de->rx_skb[i].mapping);
+		de->rx_ring[i].addr2 = 0;
+	}
+
+	return 0;
+
+err_out:
+	de_clean_rings(de);
+	return -ENOMEM;
+}
+
+static int de_init_rings (struct de_private *de)
+{
+	memset(de->tx_ring, 0, sizeof(struct de_desc) * DE_TX_RING_SIZE);
+	de->tx_ring[DE_TX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd);
+
+	de->rx_tail = 0;
+	de->tx_head = de->tx_tail = 0;
+
+	return de_refill_rx (de);
+}
+
+static int de_alloc_rings (struct de_private *de)
+{
+	de->rx_ring = pci_alloc_consistent(de->pdev, DE_RING_BYTES, &de->ring_dma);
+	if (!de->rx_ring)
+		return -ENOMEM;
+	de->tx_ring = &de->rx_ring[DE_RX_RING_SIZE];
+	return de_init_rings(de);
+}
+
+static void de_clean_rings (struct de_private *de)
+{
+	unsigned i;
+
+	memset(de->rx_ring, 0, sizeof(struct de_desc) * DE_RX_RING_SIZE);
+	de->rx_ring[DE_RX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd);
+	wmb();
+	memset(de->tx_ring, 0, sizeof(struct de_desc) * DE_TX_RING_SIZE);
+	de->tx_ring[DE_TX_RING_SIZE - 1].opts2 = cpu_to_le32(RingEnd);
+	wmb();
+
+	for (i = 0; i < DE_RX_RING_SIZE; i++) {
+		if (de->rx_skb[i].skb) {
+			pci_unmap_single(de->pdev, de->rx_skb[i].mapping,
+					 de->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(de->rx_skb[i].skb);
+		}
+	}
+
+	for (i = 0; i < DE_TX_RING_SIZE; i++) {
+		struct sk_buff *skb = de->tx_skb[i].skb;
+		if ((skb) && (skb != DE_DUMMY_SKB)) {
+			if (skb != DE_SETUP_SKB) {
+				de->net_stats.tx_dropped++;
+				pci_unmap_single(de->pdev,
+					de->tx_skb[i].mapping,
+					skb->len, PCI_DMA_TODEVICE);
+				dev_kfree_skb(skb);
+			} else {
+				pci_unmap_single(de->pdev,
+					de->tx_skb[i].mapping,
+					sizeof(de->setup_frame),
+					PCI_DMA_TODEVICE);
+			}
+		}
+	}
+
+	memset(&de->rx_skb, 0, sizeof(struct ring_info) * DE_RX_RING_SIZE);
+	memset(&de->tx_skb, 0, sizeof(struct ring_info) * DE_TX_RING_SIZE);
+}
+
+static void de_free_rings (struct de_private *de)
+{
+	de_clean_rings(de);
+	pci_free_consistent(de->pdev, DE_RING_BYTES, de->rx_ring, de->ring_dma);
+	de->rx_ring = NULL;
+	de->tx_ring = NULL;
+}
+
+static int de_open (struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	int rc;
+
+	netif_dbg(de, ifup, dev, "enabling interface\n");
+
+	de->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+
+	rc = de_alloc_rings(de);
+	if (rc) {
+		netdev_err(dev, "ring allocation failure, err=%d\n", rc);
+		return rc;
+	}
+
+	dw32(IntrMask, 0);
+
+	rc = request_irq(dev->irq, de_interrupt, IRQF_SHARED, dev->name, dev);
+	if (rc) {
+		netdev_err(dev, "IRQ %d request failure, err=%d\n",
+			   dev->irq, rc);
+		goto err_out_free;
+	}
+
+	rc = de_init_hw(de);
+	if (rc) {
+		netdev_err(dev, "h/w init failure, err=%d\n", rc);
+		goto err_out_free_irq;
+	}
+
+	netif_start_queue(dev);
+	mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK);
+
+	return 0;
+
+err_out_free_irq:
+	free_irq(dev->irq, dev);
+err_out_free:
+	de_free_rings(de);
+	return rc;
+}
+
+static int de_close (struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	unsigned long flags;
+
+	netif_dbg(de, ifdown, dev, "disabling interface\n");
+
+	del_timer_sync(&de->media_timer);
+
+	spin_lock_irqsave(&de->lock, flags);
+	de_stop_hw(de);
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+	spin_unlock_irqrestore(&de->lock, flags);
+
+	free_irq(dev->irq, dev);
+
+	de_free_rings(de);
+	de_adapter_sleep(de);
+	return 0;
+}
+
+static void de_tx_timeout (struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	netdev_dbg(dev, "NIC status %08x mode %08x sia %08x desc %u/%u/%u\n",
+		   dr32(MacStatus), dr32(MacMode), dr32(SIAStatus),
+		   de->rx_tail, de->tx_head, de->tx_tail);
+
+	del_timer_sync(&de->media_timer);
+
+	disable_irq(dev->irq);
+	spin_lock_irq(&de->lock);
+
+	de_stop_hw(de);
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+
+	spin_unlock_irq(&de->lock);
+	enable_irq(dev->irq);
+
+	/* Update the error counts. */
+	__de_get_stats(de);
+
+	synchronize_irq(dev->irq);
+	de_clean_rings(de);
+
+	de_init_rings(de);
+
+	de_init_hw(de);
+
+	netif_wake_queue(dev);
+}
+
+static void __de_get_regs(struct de_private *de, u8 *buf)
+{
+	int i;
+	u32 *rbuf = (u32 *)buf;
+
+	/* read all CSRs */
+	for (i = 0; i < DE_NUM_REGS; i++)
+		rbuf[i] = dr32(i * 8);
+
+	/* handle self-clearing RxMissed counter, CSR8 */
+	de_rx_missed(de, rbuf[8]);
+}
+
+static int __de_get_settings(struct de_private *de, struct ethtool_cmd *ecmd)
+{
+	ecmd->supported = de->media_supported;
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->phy_address = 0;
+	ecmd->advertising = de->media_advertise;
+
+	switch (de->media_type) {
+	case DE_MEDIA_AUI:
+		ecmd->port = PORT_AUI;
+		break;
+	case DE_MEDIA_BNC:
+		ecmd->port = PORT_BNC;
+		break;
+	default:
+		ecmd->port = PORT_TP;
+		break;
+	}
+
+	ethtool_cmd_speed_set(ecmd, 10);
+
+	if (dr32(MacMode) & FullDuplex)
+		ecmd->duplex = DUPLEX_FULL;
+	else
+		ecmd->duplex = DUPLEX_HALF;
+
+	if (de->media_lock)
+		ecmd->autoneg = AUTONEG_DISABLE;
+	else
+		ecmd->autoneg = AUTONEG_ENABLE;
+
+	/* ignore maxtxpkt, maxrxpkt for now */
+
+	return 0;
+}
+
+static int __de_set_settings(struct de_private *de, struct ethtool_cmd *ecmd)
+{
+	u32 new_media;
+	unsigned int media_lock;
+
+	if (ethtool_cmd_speed(ecmd) != 10)
+		return -EINVAL;
+	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
+		return -EINVAL;
+	if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI && ecmd->port != PORT_BNC)
+		return -EINVAL;
+	if (de->de21040 && ecmd->port == PORT_BNC)
+		return -EINVAL;
+	if (ecmd->transceiver != XCVR_INTERNAL)
+		return -EINVAL;
+	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
+		return -EINVAL;
+	if (ecmd->advertising & ~de->media_supported)
+		return -EINVAL;
+	if (ecmd->autoneg == AUTONEG_ENABLE &&
+	    (!(ecmd->advertising & ADVERTISED_Autoneg)))
+		return -EINVAL;
+
+	switch (ecmd->port) {
+	case PORT_AUI:
+		new_media = DE_MEDIA_AUI;
+		if (!(ecmd->advertising & ADVERTISED_AUI))
+			return -EINVAL;
+		break;
+	case PORT_BNC:
+		new_media = DE_MEDIA_BNC;
+		if (!(ecmd->advertising & ADVERTISED_BNC))
+			return -EINVAL;
+		break;
+	default:
+		if (ecmd->autoneg == AUTONEG_ENABLE)
+			new_media = DE_MEDIA_TP_AUTO;
+		else if (ecmd->duplex == DUPLEX_FULL)
+			new_media = DE_MEDIA_TP_FD;
+		else
+			new_media = DE_MEDIA_TP;
+		if (!(ecmd->advertising & ADVERTISED_TP))
+			return -EINVAL;
+		if (!(ecmd->advertising & (ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half)))
+			return -EINVAL;
+		break;
+	}
+
+	media_lock = (ecmd->autoneg == AUTONEG_ENABLE) ? 0 : 1;
+
+	if ((new_media == de->media_type) &&
+	    (media_lock == de->media_lock) &&
+	    (ecmd->advertising == de->media_advertise))
+		return 0; /* nothing to change */
+
+	de_link_down(de);
+	mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK);
+	de_stop_rxtx(de);
+
+	de->media_type = new_media;
+	de->media_lock = media_lock;
+	de->media_advertise = ecmd->advertising;
+	de_set_media(de);
+	if (netif_running(de->dev))
+		de_start_rxtx(de);
+
+	return 0;
+}
+
+static void de_get_drvinfo (struct net_device *dev,struct ethtool_drvinfo *info)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	strcpy (info->driver, DRV_NAME);
+	strcpy (info->version, DRV_VERSION);
+	strcpy (info->bus_info, pci_name(de->pdev));
+	info->eedump_len = DE_EEPROM_SIZE;
+}
+
+static int de_get_regs_len(struct net_device *dev)
+{
+	return DE_REGS_SIZE;
+}
+
+static int de_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct de_private *de = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&de->lock);
+	rc = __de_get_settings(de, ecmd);
+	spin_unlock_irq(&de->lock);
+
+	return rc;
+}
+
+static int de_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+	struct de_private *de = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&de->lock);
+	rc = __de_set_settings(de, ecmd);
+	spin_unlock_irq(&de->lock);
+
+	return rc;
+}
+
+static u32 de_get_msglevel(struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	return de->msg_enable;
+}
+
+static void de_set_msglevel(struct net_device *dev, u32 msglvl)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	de->msg_enable = msglvl;
+}
+
+static int de_get_eeprom(struct net_device *dev,
+			 struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	if (!de->ee_data)
+		return -EOPNOTSUPP;
+	if ((eeprom->offset != 0) || (eeprom->magic != 0) ||
+	    (eeprom->len != DE_EEPROM_SIZE))
+		return -EINVAL;
+	memcpy(data, de->ee_data, eeprom->len);
+
+	return 0;
+}
+
+static int de_nway_reset(struct net_device *dev)
+{
+	struct de_private *de = netdev_priv(dev);
+	u32 status;
+
+	if (de->media_type != DE_MEDIA_TP_AUTO)
+		return -EINVAL;
+	if (netif_carrier_ok(de->dev))
+		de_link_down(de);
+
+	status = dr32(SIAStatus);
+	dw32(SIAStatus, (status & ~NWayState) | NWayRestart);
+	netif_info(de, link, dev, "link nway restart, status %x,%x\n",
+		   status, dr32(SIAStatus));
+	return 0;
+}
+
+static void de_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+			void *data)
+{
+	struct de_private *de = netdev_priv(dev);
+
+	regs->version = (DE_REGS_VER << 2) | de->de21040;
+
+	spin_lock_irq(&de->lock);
+	__de_get_regs(de, data);
+	spin_unlock_irq(&de->lock);
+}
+
+static const struct ethtool_ops de_ethtool_ops = {
+	.get_link		= ethtool_op_get_link,
+	.get_drvinfo		= de_get_drvinfo,
+	.get_regs_len		= de_get_regs_len,
+	.get_settings		= de_get_settings,
+	.set_settings		= de_set_settings,
+	.get_msglevel		= de_get_msglevel,
+	.set_msglevel		= de_set_msglevel,
+	.get_eeprom		= de_get_eeprom,
+	.nway_reset		= de_nway_reset,
+	.get_regs		= de_get_regs,
+};
+
+static void __devinit de21040_get_mac_address (struct de_private *de)
+{
+	unsigned i;
+
+	dw32 (ROMCmd, 0);	/* Reset the pointer with a dummy write. */
+	udelay(5);
+
+	for (i = 0; i < 6; i++) {
+		int value, boguscnt = 100000;
+		do {
+			value = dr32(ROMCmd);
+			rmb();
+		} while (value < 0 && --boguscnt > 0);
+		de->dev->dev_addr[i] = value;
+		udelay(1);
+		if (boguscnt <= 0)
+			pr_warn("timeout reading 21040 MAC address byte %u\n",
+				i);
+	}
+}
+
+static void __devinit de21040_get_media_info(struct de_private *de)
+{
+	unsigned int i;
+
+	de->media_type = DE_MEDIA_TP;
+	de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Full |
+			       SUPPORTED_10baseT_Half | SUPPORTED_AUI;
+	de->media_advertise = de->media_supported;
+
+	for (i = 0; i < DE_MAX_MEDIA; i++) {
+		switch (i) {
+		case DE_MEDIA_AUI:
+		case DE_MEDIA_TP:
+		case DE_MEDIA_TP_FD:
+			de->media[i].type = i;
+			de->media[i].csr13 = t21040_csr13[i];
+			de->media[i].csr14 = t21040_csr14[i];
+			de->media[i].csr15 = t21040_csr15[i];
+			break;
+		default:
+			de->media[i].type = DE_MEDIA_INVALID;
+			break;
+		}
+	}
+}
+
+/* Note: this routine returns extra data bits for size detection. */
+static unsigned __devinit tulip_read_eeprom(void __iomem *regs, int location, int addr_len)
+{
+	int i;
+	unsigned retval = 0;
+	void __iomem *ee_addr = regs + ROMCmd;
+	int read_cmd = location | (EE_READ_CMD << addr_len);
+
+	writel(EE_ENB & ~EE_CS, ee_addr);
+	writel(EE_ENB, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 4 + addr_len; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+		writel(EE_ENB | dataval, ee_addr);
+		readl(ee_addr);
+		writel(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+		readl(ee_addr);
+		retval = (retval << 1) | ((readl(ee_addr) & EE_DATA_READ) ? 1 : 0);
+	}
+	writel(EE_ENB, ee_addr);
+	readl(ee_addr);
+
+	for (i = 16; i > 0; i--) {
+		writel(EE_ENB | EE_SHIFT_CLK, ee_addr);
+		readl(ee_addr);
+		retval = (retval << 1) | ((readl(ee_addr) & EE_DATA_READ) ? 1 : 0);
+		writel(EE_ENB, ee_addr);
+		readl(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	writel(EE_ENB & ~EE_CS, ee_addr);
+	return retval;
+}
+
+static void __devinit de21041_get_srom_info (struct de_private *de)
+{
+	unsigned i, sa_offset = 0, ofs;
+	u8 ee_data[DE_EEPROM_SIZE + 6] = {};
+	unsigned ee_addr_size = tulip_read_eeprom(de->regs, 0xff, 8) & 0x40000 ? 8 : 6;
+	struct de_srom_info_leaf *il;
+	void *bufp;
+
+	/* download entire eeprom */
+	for (i = 0; i < DE_EEPROM_WORDS; i++)
+		((__le16 *)ee_data)[i] =
+			cpu_to_le16(tulip_read_eeprom(de->regs, i, ee_addr_size));
+
+	/* DEC now has a specification but early board makers
+	   just put the address in the first EEPROM locations. */
+	/* This does  memcmp(eedata, eedata+16, 8) */
+
+#ifndef CONFIG_MIPS_COBALT
+
+	for (i = 0; i < 8; i ++)
+		if (ee_data[i] != ee_data[16+i])
+			sa_offset = 20;
+
+#endif
+
+	/* store MAC address */
+	for (i = 0; i < 6; i ++)
+		de->dev->dev_addr[i] = ee_data[i + sa_offset];
+
+	/* get offset of controller 0 info leaf.  ignore 2nd byte. */
+	ofs = ee_data[SROMC0InfoLeaf];
+	if (ofs >= (sizeof(ee_data) - sizeof(struct de_srom_info_leaf) - sizeof(struct de_srom_media_block)))
+		goto bad_srom;
+
+	/* get pointer to info leaf */
+	il = (struct de_srom_info_leaf *) &ee_data[ofs];
+
+	/* paranoia checks */
+	if (il->n_blocks == 0)
+		goto bad_srom;
+	if ((sizeof(ee_data) - ofs) <
+	    (sizeof(struct de_srom_info_leaf) + (sizeof(struct de_srom_media_block) * il->n_blocks)))
+		goto bad_srom;
+
+	/* get default media type */
+	switch (get_unaligned(&il->default_media)) {
+	case 0x0001:  de->media_type = DE_MEDIA_BNC; break;
+	case 0x0002:  de->media_type = DE_MEDIA_AUI; break;
+	case 0x0204:  de->media_type = DE_MEDIA_TP_FD; break;
+	default: de->media_type = DE_MEDIA_TP_AUTO; break;
+	}
+
+	if (netif_msg_probe(de))
+		pr_info("de%d: SROM leaf offset %u, default media %s\n",
+		       de->board_idx, ofs, media_name[de->media_type]);
+
+	/* init SIA register values to defaults */
+	for (i = 0; i < DE_MAX_MEDIA; i++) {
+		de->media[i].type = DE_MEDIA_INVALID;
+		de->media[i].csr13 = 0xffff;
+		de->media[i].csr14 = 0xffff;
+		de->media[i].csr15 = 0xffff;
+	}
+
+	/* parse media blocks to see what medias are supported,
+	 * and if any custom CSR values are provided
+	 */
+	bufp = ((void *)il) + sizeof(*il);
+	for (i = 0; i < il->n_blocks; i++) {
+		struct de_srom_media_block *ib = bufp;
+		unsigned idx;
+
+		/* index based on media type in media block */
+		switch(ib->opts & MediaBlockMask) {
+		case 0: /* 10baseT */
+			de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half
+					  | SUPPORTED_Autoneg;
+			idx = DE_MEDIA_TP;
+			de->media[DE_MEDIA_TP_AUTO].type = DE_MEDIA_TP_AUTO;
+			break;
+		case 1: /* BNC */
+			de->media_supported |= SUPPORTED_BNC;
+			idx = DE_MEDIA_BNC;
+			break;
+		case 2: /* AUI */
+			de->media_supported |= SUPPORTED_AUI;
+			idx = DE_MEDIA_AUI;
+			break;
+		case 4: /* 10baseT-FD */
+			de->media_supported |= SUPPORTED_TP | SUPPORTED_10baseT_Full
+					  | SUPPORTED_Autoneg;
+			idx = DE_MEDIA_TP_FD;
+			de->media[DE_MEDIA_TP_AUTO].type = DE_MEDIA_TP_AUTO;
+			break;
+		default:
+			goto bad_srom;
+		}
+
+		de->media[idx].type = idx;
+
+		if (netif_msg_probe(de))
+			pr_info("de%d:   media block #%u: %s",
+				de->board_idx, i,
+				media_name[de->media[idx].type]);
+
+		bufp += sizeof (ib->opts);
+
+		if (ib->opts & MediaCustomCSRs) {
+			de->media[idx].csr13 = get_unaligned(&ib->csr13);
+			de->media[idx].csr14 = get_unaligned(&ib->csr14);
+			de->media[idx].csr15 = get_unaligned(&ib->csr15);
+			bufp += sizeof(ib->csr13) + sizeof(ib->csr14) +
+				sizeof(ib->csr15);
+
+			if (netif_msg_probe(de))
+				pr_cont(" (%x,%x,%x)\n",
+					de->media[idx].csr13,
+					de->media[idx].csr14,
+					de->media[idx].csr15);
+
+		} else {
+			if (netif_msg_probe(de))
+				pr_cont("\n");
+		}
+
+		if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE - 3]))
+			break;
+	}
+
+	de->media_advertise = de->media_supported;
+
+fill_defaults:
+	/* fill in defaults, for cases where custom CSRs not used */
+	for (i = 0; i < DE_MAX_MEDIA; i++) {
+		if (de->media[i].csr13 == 0xffff)
+			de->media[i].csr13 = t21041_csr13[i];
+		if (de->media[i].csr14 == 0xffff) {
+			/* autonegotiation is broken at least on some chip
+			   revisions - rev. 0x21 works, 0x11 does not */
+			if (de->pdev->revision < 0x20)
+				de->media[i].csr14 = t21041_csr14_brk[i];
+			else
+				de->media[i].csr14 = t21041_csr14[i];
+		}
+		if (de->media[i].csr15 == 0xffff)
+			de->media[i].csr15 = t21041_csr15[i];
+	}
+
+	de->ee_data = kmemdup(&ee_data[0], DE_EEPROM_SIZE, GFP_KERNEL);
+
+	return;
+
+bad_srom:
+	/* for error cases, it's ok to assume we support all these */
+	for (i = 0; i < DE_MAX_MEDIA; i++)
+		de->media[i].type = i;
+	de->media_supported =
+		SUPPORTED_10baseT_Half |
+		SUPPORTED_10baseT_Full |
+		SUPPORTED_Autoneg |
+		SUPPORTED_TP |
+		SUPPORTED_AUI |
+		SUPPORTED_BNC;
+	goto fill_defaults;
+}
+
+static const struct net_device_ops de_netdev_ops = {
+	.ndo_open		= de_open,
+	.ndo_stop		= de_close,
+	.ndo_set_rx_mode	= de_set_rx_mode,
+	.ndo_start_xmit		= de_start_xmit,
+	.ndo_get_stats		= de_get_stats,
+	.ndo_tx_timeout 	= de_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int __devinit de_init_one (struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct de_private *de;
+	int rc;
+	void __iomem *regs;
+	unsigned long pciaddr;
+	static int board_idx = -1;
+
+	board_idx++;
+
+#ifndef MODULE
+	if (board_idx == 0)
+		pr_info("%s\n", version);
+#endif
+
+	/* allocate a new ethernet device structure, and fill in defaults */
+	dev = alloc_etherdev(sizeof(struct de_private));
+	if (!dev)
+		return -ENOMEM;
+
+	dev->netdev_ops = &de_netdev_ops;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	dev->ethtool_ops = &de_ethtool_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	de = netdev_priv(dev);
+	de->de21040 = ent->driver_data == 0 ? 1 : 0;
+	de->pdev = pdev;
+	de->dev = dev;
+	de->msg_enable = (debug < 0 ? DE_DEF_MSG_ENABLE : debug);
+	de->board_idx = board_idx;
+	spin_lock_init (&de->lock);
+	init_timer(&de->media_timer);
+	if (de->de21040)
+		de->media_timer.function = de21040_media_timer;
+	else
+		de->media_timer.function = de21041_media_timer;
+	de->media_timer.data = (unsigned long) de;
+
+	netif_carrier_off(dev);
+
+	/* wake up device, assign resources */
+	rc = pci_enable_device(pdev);
+	if (rc)
+		goto err_out_free;
+
+	/* reserve PCI resources to ensure driver atomicity */
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out_disable;
+
+	/* check for invalid IRQ value */
+	if (pdev->irq < 2) {
+		rc = -EIO;
+		pr_err("invalid irq (%d) for pci dev %s\n",
+		       pdev->irq, pci_name(pdev));
+		goto err_out_res;
+	}
+
+	dev->irq = pdev->irq;
+
+	/* obtain and check validity of PCI I/O address */
+	pciaddr = pci_resource_start(pdev, 1);
+	if (!pciaddr) {
+		rc = -EIO;
+		pr_err("no MMIO resource for pci dev %s\n", pci_name(pdev));
+		goto err_out_res;
+	}
+	if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) {
+		rc = -EIO;
+		pr_err("MMIO resource (%llx) too small on pci dev %s\n",
+		       (unsigned long long)pci_resource_len(pdev, 1),
+		       pci_name(pdev));
+		goto err_out_res;
+	}
+
+	/* remap CSR registers */
+	regs = ioremap_nocache(pciaddr, DE_REGS_SIZE);
+	if (!regs) {
+		rc = -EIO;
+		pr_err("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
+		       (unsigned long long)pci_resource_len(pdev, 1),
+		       pciaddr, pci_name(pdev));
+		goto err_out_res;
+	}
+	dev->base_addr = (unsigned long) regs;
+	de->regs = regs;
+
+	de_adapter_wake(de);
+
+	/* make sure hardware is not running */
+	rc = de_reset_mac(de);
+	if (rc) {
+		pr_err("Cannot reset MAC, pci dev %s\n", pci_name(pdev));
+		goto err_out_iomap;
+	}
+
+	/* get MAC address, initialize default media type and
+	 * get list of supported media
+	 */
+	if (de->de21040) {
+		de21040_get_mac_address(de);
+		de21040_get_media_info(de);
+	} else {
+		de21041_get_srom_info(de);
+	}
+
+	/* register new network interface with kernel */
+	rc = register_netdev(dev);
+	if (rc)
+		goto err_out_iomap;
+
+	/* print info about board and interface just registered */
+	netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+		    de->de21040 ? "21040" : "21041",
+		    dev->base_addr,
+		    dev->dev_addr,
+		    dev->irq);
+
+	pci_set_drvdata(pdev, dev);
+
+	/* enable busmastering */
+	pci_set_master(pdev);
+
+	/* put adapter to sleep */
+	de_adapter_sleep(de);
+
+	return 0;
+
+err_out_iomap:
+	kfree(de->ee_data);
+	iounmap(regs);
+err_out_res:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_free:
+	free_netdev(dev);
+	return rc;
+}
+
+static void __devexit de_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct de_private *de = netdev_priv(dev);
+
+	BUG_ON(!dev);
+	unregister_netdev(dev);
+	kfree(de->ee_data);
+	iounmap(de->regs);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+}
+
+#ifdef CONFIG_PM
+
+static int de_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct de_private *de = netdev_priv(dev);
+
+	rtnl_lock();
+	if (netif_running (dev)) {
+		del_timer_sync(&de->media_timer);
+
+		disable_irq(dev->irq);
+		spin_lock_irq(&de->lock);
+
+		de_stop_hw(de);
+		netif_stop_queue(dev);
+		netif_device_detach(dev);
+		netif_carrier_off(dev);
+
+		spin_unlock_irq(&de->lock);
+		enable_irq(dev->irq);
+
+		/* Update the error counts. */
+		__de_get_stats(de);
+
+		synchronize_irq(dev->irq);
+		de_clean_rings(de);
+
+		de_adapter_sleep(de);
+		pci_disable_device(pdev);
+	} else {
+		netif_device_detach(dev);
+	}
+	rtnl_unlock();
+	return 0;
+}
+
+static int de_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct de_private *de = netdev_priv(dev);
+	int retval = 0;
+
+	rtnl_lock();
+	if (netif_device_present(dev))
+		goto out;
+	if (!netif_running(dev))
+		goto out_attach;
+	if ((retval = pci_enable_device(pdev))) {
+		netdev_err(dev, "pci_enable_device failed in resume\n");
+		goto out;
+	}
+	pci_set_master(pdev);
+	de_init_rings(de);
+	de_init_hw(de);
+out_attach:
+	netif_device_attach(dev);
+out:
+	rtnl_unlock();
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver de_driver = {
+	.name		= DRV_NAME,
+	.id_table	= de_pci_tbl,
+	.probe		= de_init_one,
+	.remove		= __devexit_p(de_remove_one),
+#ifdef CONFIG_PM
+	.suspend	= de_suspend,
+	.resume		= de_resume,
+#endif
+};
+
+static int __init de_init (void)
+{
+#ifdef MODULE
+	pr_info("%s\n", version);
+#endif
+	return pci_register_driver(&de_driver);
+}
+
+static void __exit de_exit (void)
+{
+	pci_unregister_driver (&de_driver);
+}
+
+module_init(de_init);
+module_exit(de_exit);
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
new file mode 100644
index 000000000000..871bcaa7068d
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -0,0 +1,5599 @@
+/*  de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500
+             ethernet driver for Linux.
+
+    Copyright 1994, 1995 Digital Equipment Corporation.
+
+    Testing resources for this driver have been made available
+    in part by NASA Ames Research Center (mjacob@nas.nasa.gov).
+
+    The author may be reached at davies@maniac.ultranet.com.
+
+    This program is free software; you can redistribute  it and/or modify it
+    under  the terms of  the GNU General  Public License as published by the
+    Free Software Foundation;  either version 2 of the  License, or (at your
+    option) any later version.
+
+    THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
+    WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+    NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
+    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+    NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+    USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+    ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+    THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+    You should have received a copy of the  GNU General Public License along
+    with this program; if not, write  to the Free Software Foundation, Inc.,
+    675 Mass Ave, Cambridge, MA 02139, USA.
+
+    Originally,   this  driver  was    written  for the  Digital   Equipment
+    Corporation series of EtherWORKS ethernet cards:
+
+        DE425 TP/COAX EISA
+	DE434 TP PCI
+	DE435 TP/COAX/AUI PCI
+	DE450 TP/COAX/AUI PCI
+	DE500 10/100 PCI Fasternet
+
+    but it  will  now attempt  to  support all  cards which   conform to the
+    Digital Semiconductor   SROM   Specification.    The  driver   currently
+    recognises the following chips:
+
+        DC21040  (no SROM)
+	DC21041[A]
+	DC21140[A]
+	DC21142
+	DC21143
+
+    So far the driver is known to work with the following cards:
+
+        KINGSTON
+	Linksys
+	ZNYX342
+	SMC8432
+	SMC9332 (w/new SROM)
+	ZNYX31[45]
+	ZNYX346 10/100 4 port (can act as a 10/100 bridge!)
+
+    The driver has been tested on a relatively busy network using the DE425,
+    DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred
+    16M of data to a DECstation 5000/200 as follows:
+
+                TCP           UDP
+             TX     RX     TX     RX
+    DE425   1030k  997k   1170k  1128k
+    DE434   1063k  995k   1170k  1125k
+    DE435   1063k  995k   1170k  1125k
+    DE500   1063k  998k   1170k  1125k  in 10Mb/s mode
+
+    All  values are typical (in   kBytes/sec) from a  sample  of 4 for  each
+    measurement. Their error is +/-20k on a quiet (private) network and also
+    depend on what load the CPU has.
+
+    =========================================================================
+    This driver  has been written substantially  from  scratch, although its
+    inheritance of style and stack interface from 'ewrk3.c' and in turn from
+    Donald Becker's 'lance.c' should be obvious. With the module autoload of
+    every  usable DECchip board,  I  pinched Donald's 'next_module' field to
+    link my modules together.
+
+    Up to 15 EISA cards can be supported under this driver, limited primarily
+    by the available IRQ lines.  I have  checked different configurations of
+    multiple depca, EtherWORKS 3 cards and de4x5 cards and  have not found a
+    problem yet (provided you have at least depca.c v0.38) ...
+
+    PCI support has been added  to allow the driver  to work with the DE434,
+    DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due
+    to the differences in the EISA and PCI CSR address offsets from the base
+    address.
+
+    The ability to load this  driver as a loadable  module has been included
+    and used extensively  during the driver development  (to save those long
+    reboot sequences).  Loadable module support  under PCI and EISA has been
+    achieved by letting the driver autoprobe as if it were compiled into the
+    kernel. Do make sure  you're not sharing  interrupts with anything  that
+    cannot accommodate  interrupt  sharing!
+
+    To utilise this ability, you have to do 8 things:
+
+    0) have a copy of the loadable modules code installed on your system.
+    1) copy de4x5.c from the  /linux/drivers/net directory to your favourite
+    temporary directory.
+    2) for fixed  autoprobes (not  recommended),  edit the source code  near
+    line 5594 to reflect the I/O address  you're using, or assign these when
+    loading by:
+
+                   insmod de4x5 io=0xghh           where g = bus number
+		                                        hh = device number
+
+       NB: autoprobing for modules is now supported by default. You may just
+           use:
+
+                   insmod de4x5
+
+           to load all available boards. For a specific board, still use
+	   the 'io=?' above.
+    3) compile  de4x5.c, but include -DMODULE in  the command line to ensure
+    that the correct bits are compiled (see end of source code).
+    4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
+    kernel with the de4x5 configuration turned off and reboot.
+    5) insmod de4x5 [io=0xghh]
+    6) run the net startup bits for your new eth?? interface(s) manually
+    (usually /etc/rc.inet[12] at boot time).
+    7) enjoy!
+
+    To unload a module, turn off the associated interface(s)
+    'ifconfig eth?? down' then 'rmmod de4x5'.
+
+    Automedia detection is included so that in  principal you can disconnect
+    from, e.g.  TP, reconnect  to BNC  and  things will still work  (after a
+    pause whilst the   driver figures out   where its media went).  My tests
+    using ping showed that it appears to work....
+
+    By  default,  the driver will  now   autodetect any  DECchip based card.
+    Should you have a need to restrict the driver to DIGITAL only cards, you
+    can compile with a  DEC_ONLY define, or if  loading as a module, use the
+    'dec_only=1'  parameter.
+
+    I've changed the timing routines to  use the kernel timer and scheduling
+    functions  so that the  hangs  and other assorted problems that occurred
+    while autosensing the  media  should be gone.  A  bonus  for the DC21040
+    auto  media sense algorithm is  that it can now  use one that is more in
+    line with the  rest (the DC21040  chip doesn't  have a hardware  timer).
+    The downside is the 1 'jiffies' (10ms) resolution.
+
+    IEEE 802.3u MII interface code has  been added in anticipation that some
+    products may use it in the future.
+
+    The SMC9332 card  has a non-compliant SROM  which needs fixing -  I have
+    patched this  driver to detect it  because the SROM format used complies
+    to a previous DEC-STD format.
+
+    I have removed the buffer copies needed for receive on Intels.  I cannot
+    remove them for   Alphas since  the  Tulip hardware   only does longword
+    aligned  DMA transfers  and  the  Alphas get   alignment traps with  non
+    longword aligned data copies (which makes them really slow). No comment.
+
+    I  have added SROM decoding  routines to make this  driver work with any
+    card that  supports the Digital  Semiconductor SROM spec. This will help
+    all  cards running the dc2114x  series chips in particular.  Cards using
+    the dc2104x  chips should run correctly with  the basic  driver.  I'm in
+    debt to <mjacob@feral.com> for the  testing and feedback that helped get
+    this feature working.  So far we have  tested KINGSTON, SMC8432, SMC9332
+    (with the latest SROM complying  with the SROM spec  V3: their first was
+    broken), ZNYX342  and  LinkSys. ZYNX314 (dual  21041  MAC) and  ZNYX 315
+    (quad 21041 MAC)  cards also  appear  to work despite their  incorrectly
+    wired IRQs.
+
+    I have added a temporary fix for interrupt problems when some SCSI cards
+    share the same interrupt as the DECchip based  cards. The problem occurs
+    because  the SCSI card wants to  grab the interrupt  as a fast interrupt
+    (runs the   service routine with interrupts turned   off) vs.  this card
+    which really needs to run the service routine with interrupts turned on.
+    This driver will  now   add the interrupt service   routine  as  a  fast
+    interrupt if it   is bounced from the   slow interrupt.  THIS IS NOT   A
+    RECOMMENDED WAY TO RUN THE DRIVER  and has been done  for a limited time
+    until  people   sort  out their  compatibility    issues and the  kernel
+    interrupt  service code  is  fixed.   YOU  SHOULD SEPARATE OUT  THE FAST
+    INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not
+    run on the same interrupt. PCMCIA/CardBus is another can of worms...
+
+    Finally, I think  I have really  fixed  the module  loading problem with
+    more than one DECchip based  card.  As a  side effect, I don't mess with
+    the  device structure any  more which means that  if more than 1 card in
+    2.0.x is    installed (4  in   2.1.x),  the  user   will have   to  edit
+    linux/drivers/net/Space.c  to make room for  them. Hence, module loading
+    is  the preferred way to use   this driver, since  it  doesn't have this
+    limitation.
+
+    Where SROM media  detection is used and  full duplex is specified in the
+    SROM,  the feature is  ignored unless  lp->params.fdx  is set at compile
+    time  OR during  a   module load  (insmod  de4x5   args='eth??:fdx' [see
+    below]).  This is because there  is no way  to automatically detect full
+    duplex   links  except through   autonegotiation.    When I  include the
+    autonegotiation feature in  the SROM autoconf  code, this detection will
+    occur automatically for that case.
+
+    Command  line arguments are  now  allowed, similar  to passing arguments
+    through LILO. This will allow a per adapter board  set up of full duplex
+    and media. The only lexical constraints  are: the board name (dev->name)
+    appears in the list before its  parameters.  The list of parameters ends
+    either at the end of the parameter list or with another board name.  The
+    following parameters are allowed:
+
+            fdx        for full duplex
+	    autosense  to set the media/speed; with the following
+	               sub-parameters:
+		       TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
+
+    Case sensitivity is important  for  the sub-parameters. They *must*   be
+    upper case. Examples:
+
+        insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
+
+    For a compiled in driver, at or above line 548, place e.g.
+	#define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
+
+    Yes,  I know full duplex isn't  permissible on BNC  or AUI; they're just
+    examples. By default, full duplex is turned off and  AUTO is the default
+    autosense setting.  In reality, I expect only  the full duplex option to
+    be used. Note the use of single quotes in the two examples above and the
+    lack of commas to separate items. ALSO, you must get the requested media
+    correct in relation to what the adapter SROM says it has. There's no way
+    to  determine this in  advance other than by  trial and error and common
+    sense, e.g. call a BNC connectored port 'BNC', not '10Mb'.
+
+    Changed the bus probing.  EISA used to be  done first,  followed by PCI.
+    Most people probably don't even know  what a de425 is today and the EISA
+    probe has messed  up some SCSI cards  in the past,  so now PCI is always
+    probed  first  followed by  EISA if  a) the architecture allows EISA and
+    either  b) there have been no PCI cards detected or  c) an EISA probe is
+    forced by  the user.  To force  a probe  include  "force_eisa"  in  your
+    insmod "args" line;  for built-in kernels either change the driver to do
+    this  automatically  or include  #define DE4X5_FORCE_EISA  on or  before
+    line 1040 in the driver.
+
+    TO DO:
+    ------
+
+    Revision History
+    ----------------
+
+    Version   Date        Description
+
+      0.1     17-Nov-94   Initial writing. ALPHA code release.
+      0.2     13-Jan-95   Added PCI support for DE435's.
+      0.21    19-Jan-95   Added auto media detection.
+      0.22    10-Feb-95   Fix interrupt handler call <chris@cosy.sbg.ac.at>.
+                          Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+			  Add request/release_region code.
+			  Add loadable modules support for PCI.
+			  Clean up loadable modules support.
+      0.23    28-Feb-95   Added DC21041 and DC21140 support.
+                          Fix missed frame counter value and initialisation.
+			  Fixed EISA probe.
+      0.24    11-Apr-95   Change delay routine to use <linux/udelay>.
+                          Change TX_BUFFS_AVAIL macro.
+			  Change media autodetection to allow manual setting.
+			  Completed DE500 (DC21140) support.
+      0.241   18-Apr-95   Interim release without DE500 Autosense Algorithm.
+      0.242   10-May-95   Minor changes.
+      0.30    12-Jun-95   Timer fix for DC21140.
+                          Portability changes.
+			  Add ALPHA changes from <jestabro@ant.tay1.dec.com>.
+			  Add DE500 semi automatic autosense.
+			  Add Link Fail interrupt TP failure detection.
+			  Add timer based link change detection.
+			  Plugged a memory leak in de4x5_queue_pkt().
+      0.31    13-Jun-95   Fixed PCI stuff for 1.3.1.
+      0.32    26-Jun-95   Added verify_area() calls in de4x5_ioctl() from a
+                          suggestion by <heiko@colossus.escape.de>.
+      0.33     8-Aug-95   Add shared interrupt support (not released yet).
+      0.331   21-Aug-95   Fix de4x5_open() with fast CPUs.
+                          Fix de4x5_interrupt().
+                          Fix dc21140_autoconf() mess.
+			  No shared interrupt support.
+      0.332   11-Sep-95   Added MII management interface routines.
+      0.40     5-Mar-96   Fix setup frame timeout <maartenb@hpkuipc.cern.ch>.
+                          Add kernel timer code (h/w is too flaky).
+			  Add MII based PHY autosense.
+			  Add new multicasting code.
+			  Add new autosense algorithms for media/mode
+			  selection using kernel scheduling/timing.
+			  Re-formatted.
+			  Made changes suggested by <jeff@router.patch.net>:
+			    Change driver to detect all DECchip based cards
+			    with DEC_ONLY restriction a special case.
+			    Changed driver to autoprobe as a module. No irq
+			    checking is done now - assume BIOS is good!
+			  Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp>
+      0.41    21-Mar-96   Don't check for get_hw_addr checksum unless DEC card
+                          only <niles@axp745gsfc.nasa.gov>
+			  Fix for multiple PCI cards reported by <jos@xos.nl>
+			  Duh, put the IRQF_SHARED flag into request_interrupt().
+			  Fix SMC ethernet address in enet_det[].
+			  Print chip name instead of "UNKNOWN" during boot.
+      0.42    26-Apr-96   Fix MII write TA bit error.
+                          Fix bug in dc21040 and dc21041 autosense code.
+			  Remove buffer copies on receive for Intels.
+			  Change sk_buff handling during media disconnects to
+			   eliminate DUP packets.
+			  Add dynamic TX thresholding.
+			  Change all chips to use perfect multicast filtering.
+			  Fix alloc_device() bug <jari@markkus2.fimr.fi>
+      0.43   21-Jun-96    Fix unconnected media TX retry bug.
+                          Add Accton to the list of broken cards.
+			  Fix TX under-run bug for non DC21140 chips.
+			  Fix boot command probe bug in alloc_device() as
+			   reported by <koen.gadeyne@barco.com> and
+			   <orava@nether.tky.hut.fi>.
+			  Add cache locks to prevent a race condition as
+			   reported by <csd@microplex.com> and
+			   <baba@beckman.uiuc.edu>.
+			  Upgraded alloc_device() code.
+      0.431  28-Jun-96    Fix potential bug in queue_pkt() from discussion
+                          with <csd@microplex.com>
+      0.44   13-Aug-96    Fix RX overflow bug in 2114[023] chips.
+                          Fix EISA probe bugs reported by <os2@kpi.kharkov.ua>
+			  and <michael@compurex.com>.
+      0.441   9-Sep-96    Change dc21041_autoconf() to probe quiet BNC media
+                           with a loopback packet.
+      0.442   9-Sep-96    Include AUI in dc21041 media printout. Bug reported
+                           by <bhat@mundook.cs.mu.OZ.AU>
+      0.45    8-Dec-96    Include endian functions for PPC use, from work
+                           by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>.
+      0.451  28-Dec-96    Added fix to allow autoprobe for modules after
+                           suggestion from <mjacob@feral.com>.
+      0.5    30-Jan-97    Added SROM decoding functions.
+                          Updated debug flags.
+			  Fix sleep/wakeup calls for PCI cards, bug reported
+			   by <cross@gweep.lkg.dec.com>.
+			  Added multi-MAC, one SROM feature from discussion
+			   with <mjacob@feral.com>.
+			  Added full module autoprobe capability.
+			  Added attempt to use an SMC9332 with broken SROM.
+			  Added fix for ZYNX multi-mac cards that didn't
+			   get their IRQs wired correctly.
+      0.51   13-Feb-97    Added endian fixes for the SROM accesses from
+			   <paubert@iram.es>
+			  Fix init_connection() to remove extra device reset.
+			  Fix MAC/PHY reset ordering in dc21140m_autoconf().
+			  Fix initialisation problem with lp->timeout in
+			   typeX_infoblock() from <paubert@iram.es>.
+			  Fix MII PHY reset problem from work done by
+			   <paubert@iram.es>.
+      0.52   26-Apr-97    Some changes may not credit the right people -
+                           a disk crash meant I lost some mail.
+			  Change RX interrupt routine to drop rather than
+			   defer packets to avoid hang reported by
+			   <g.thomas@opengroup.org>.
+			  Fix srom_exec() to return for COMPACT and type 1
+			   infoblocks.
+			  Added DC21142 and DC21143 functions.
+			  Added byte counters from <phil@tazenda.demon.co.uk>
+			  Added IRQF_DISABLED temporary fix from
+			   <mjacob@feral.com>.
+      0.53   12-Nov-97    Fix the *_probe() to include 'eth??' name during
+                           module load: bug reported by
+			   <Piete.Brooks@cl.cam.ac.uk>
+			  Fix multi-MAC, one SROM, to work with 2114x chips:
+			   bug reported by <cmetz@inner.net>.
+			  Make above search independent of BIOS device scan
+			   direction.
+			  Completed DC2114[23] autosense functions.
+      0.531  21-Dec-97    Fix DE500-XA 100Mb/s bug reported by
+                           <robin@intercore.com
+			  Fix type1_infoblock() bug introduced in 0.53, from
+			   problem reports by
+			   <parmee@postecss.ncrfran.france.ncr.com> and
+			   <jo@ice.dillingen.baynet.de>.
+			  Added argument list to set up each board from either
+			   a module's command line or a compiled in #define.
+			  Added generic MII PHY functionality to deal with
+			   newer PHY chips.
+			  Fix the mess in 2.1.67.
+      0.532   5-Jan-98    Fix bug in mii_get_phy() reported by
+                           <redhat@cococo.net>.
+                          Fix bug in pci_probe() for 64 bit systems reported
+			   by <belliott@accessone.com>.
+      0.533   9-Jan-98    Fix more 64 bit bugs reported by <jal@cs.brown.edu>.
+      0.534  24-Jan-98    Fix last (?) endian bug from <geert@linux-m68k.org>
+      0.535  21-Feb-98    Fix Ethernet Address PROM reset bug for DC21040.
+      0.536  21-Mar-98    Change pci_probe() to use the pci_dev structure.
+			  **Incompatible with 2.0.x from here.**
+      0.540   5-Jul-98    Atomicize assertion of dev->interrupt for SMP
+                           from <lma@varesearch.com>
+			  Add TP, AUI and BNC cases to 21140m_autoconf() for
+			   case where a 21140 under SROM control uses, e.g. AUI
+			   from problem report by <delchini@lpnp09.in2p3.fr>
+			  Add MII parallel detection to 2114x_autoconf() for
+			   case where no autonegotiation partner exists from
+			   problem report by <mlapsley@ndirect.co.uk>.
+			  Add ability to force connection type directly even
+			   when using SROM control from problem report by
+			   <earl@exis.net>.
+			  Updated the PCI interface to conform with the latest
+			   version. I hope nothing is broken...
+          		  Add TX done interrupt modification from suggestion
+			   by <Austin.Donnelly@cl.cam.ac.uk>.
+			  Fix is_anc_capable() bug reported by
+			   <Austin.Donnelly@cl.cam.ac.uk>.
+			  Fix type[13]_infoblock() bug: during MII search, PHY
+			   lp->rst not run because lp->ibn not initialised -
+			   from report & fix by <paubert@iram.es>.
+			  Fix probe bug with EISA & PCI cards present from
+                           report by <eirik@netcom.com>.
+      0.541  24-Aug-98    Fix compiler problems associated with i386-string
+                           ops from multiple bug reports and temporary fix
+			   from <paubert@iram.es>.
+			  Fix pci_probe() to correctly emulate the old
+			   pcibios_find_class() function.
+			  Add an_exception() for old ZYNX346 and fix compile
+			   warning on PPC & SPARC, from <ecd@skynet.be>.
+			  Fix lastPCI to correctly work with compiled in
+			   kernels and modules from bug report by
+			   <Zlatko.Calusic@CARNet.hr> et al.
+      0.542  15-Sep-98    Fix dc2114x_autoconf() to stop multiple messages
+                           when media is unconnected.
+			  Change dev->interrupt to lp->interrupt to ensure
+			   alignment for Alpha's and avoid their unaligned
+			   access traps. This flag is merely for log messages:
+			   should do something more definitive though...
+      0.543  30-Dec-98    Add SMP spin locking.
+      0.544   8-May-99    Fix for buggy SROM in Motorola embedded boards using
+                           a 21143 by <mmporter@home.com>.
+			  Change PCI/EISA bus probing order.
+      0.545  28-Nov-99    Further Moto SROM bug fix from
+                           <mporter@eng.mcd.mot.com>
+                          Remove double checking for DEBUG_RX in de4x5_dbg_rx()
+			   from report by <geert@linux-m68k.org>
+      0.546  22-Feb-01    Fixes Alpha XP1000 oops.  The srom_search function
+                           was causing a page fault when initializing the
+                           variable 'pb', on a non de4x5 PCI device, in this
+                           case a PCI bridge (DEC chip 21152). The value of
+                           'pb' is now only initialized if a de4x5 chip is
+                           present.
+                           <france@handhelds.org>
+      0.547  08-Nov-01    Use library crc32 functions by <Matt_Domsch@dell.com>
+      0.548  30-Aug-03    Big 2.6 cleanup. Ported to PCI/EISA probing and
+                           generic DMA APIs. Fixed DE425 support on Alpha.
+			   <maz@wild-wind.fr.eu.org>
+    =========================================================================
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/eisa.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/moduleparam.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <asm/uaccess.h>
+#ifdef CONFIG_PPC_PMAC
+#include <asm/machdep.h>
+#endif /* CONFIG_PPC_PMAC */
+
+#include "de4x5.h"
+
+static const char version[] __devinitconst =
+	KERN_INFO "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n";
+
+#define c_char const char
+
+/*
+** MII Information
+*/
+struct phy_table {
+    int reset;              /* Hard reset required?                         */
+    int id;                 /* IEEE OUI                                     */
+    int ta;                 /* One cycle TA time - 802.3u is confusing here */
+    struct {                /* Non autonegotiation (parallel) speed det.    */
+	int reg;
+	int mask;
+	int value;
+    } spd;
+};
+
+struct mii_phy {
+    int reset;              /* Hard reset required?                      */
+    int id;                 /* IEEE OUI                                  */
+    int ta;                 /* One cycle TA time                         */
+    struct {                /* Non autonegotiation (parallel) speed det. */
+	int reg;
+	int mask;
+	int value;
+    } spd;
+    int addr;               /* MII address for the PHY                   */
+    u_char  *gep;           /* Start of GEP sequence block in SROM       */
+    u_char  *rst;           /* Start of reset sequence in SROM           */
+    u_int mc;               /* Media Capabilities                        */
+    u_int ana;              /* NWay Advertisement                        */
+    u_int fdx;              /* Full DupleX capabilities for each media   */
+    u_int ttm;              /* Transmit Threshold Mode for each media    */
+    u_int mci;              /* 21142 MII Connector Interrupt info        */
+};
+
+#define DE4X5_MAX_PHY 8     /* Allow up to 8 attached PHY devices per board */
+
+struct sia_phy {
+    u_char mc;              /* Media Code                                */
+    u_char ext;             /* csr13-15 valid when set                   */
+    int csr13;              /* SIA Connectivity Register                 */
+    int csr14;              /* SIA TX/RX Register                        */
+    int csr15;              /* SIA General Register                      */
+    int gepc;               /* SIA GEP Control Information               */
+    int gep;                /* SIA GEP Data                              */
+};
+
+/*
+** Define the know universe of PHY devices that can be
+** recognised by this driver.
+*/
+static struct phy_table phy_info[] = {
+    {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}},       /* National TX      */
+    {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}},       /* Broadcom T4      */
+    {0, SEEQ_T4    , 1, {0x12, 0x10, 0x10}},       /* SEEQ T4          */
+    {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}},       /* Cypress T4       */
+    {0, 0x7810     , 1, {0x14, 0x0800, 0x0800}}    /* Level One LTX970 */
+};
+
+/*
+** These GENERIC values assumes that the PHY devices follow 802.3u and
+** allow parallel detection to set the link partner ability register.
+** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported.
+*/
+#define GENERIC_REG   0x05      /* Autoneg. Link Partner Advertisement Reg. */
+#define GENERIC_MASK  MII_ANLPA_100M /* All 100Mb/s Technologies            */
+#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4       */
+
+/*
+** Define special SROM detection cases
+*/
+static c_char enet_det[][ETH_ALEN] = {
+    {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00},
+    {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00}
+};
+
+#define SMC    1
+#define ACCTON 2
+
+/*
+** SROM Repair definitions. If a broken SROM is detected a card may
+** use this information to help figure out what to do. This is a
+** "stab in the dark" and so far for SMC9332's only.
+*/
+static c_char srom_repair_info[][100] = {
+    {0x00,0x1e,0x00,0x00,0x00,0x08,             /* SMC9332 */
+     0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02,
+     0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50,
+     0x00,0x18,}
+};
+
+
+#ifdef DE4X5_DEBUG
+static int de4x5_debug = DE4X5_DEBUG;
+#else
+/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/
+static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION);
+#endif
+
+/*
+** Allow per adapter set up. For modules this is simply a command line
+** parameter, e.g.:
+** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
+**
+** For a compiled in driver, place e.g.
+**     #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP"
+** here
+*/
+#ifdef DE4X5_PARM
+static char *args = DE4X5_PARM;
+#else
+static char *args;
+#endif
+
+struct parameters {
+    bool fdx;
+    int autosense;
+};
+
+#define DE4X5_AUTOSENSE_MS 250      /* msec autosense tick (DE500) */
+
+#define DE4X5_NDA 0xffe0            /* No Device (I/O) Address */
+
+/*
+** Ethernet PROM defines
+*/
+#define PROBE_LENGTH    32
+#define ETH_PROM_SIG    0xAA5500FFUL
+
+/*
+** Ethernet Info
+*/
+#define PKT_BUF_SZ	1536            /* Buffer size for each Tx/Rx buffer */
+#define IEEE802_3_SZ    1518            /* Packet + CRC */
+#define MAX_PKT_SZ   	1514            /* Maximum ethernet packet length */
+#define MAX_DAT_SZ   	1500            /* Maximum ethernet data length */
+#define MIN_DAT_SZ   	1               /* Minimum ethernet data length */
+#define PKT_HDR_LEN     14              /* Addresses and data length info */
+#define FAKE_FRAME_LEN  (MAX_PKT_SZ + 1)
+#define QUEUE_PKT_TIMEOUT (3*HZ)        /* 3 second timeout */
+
+
+/*
+** EISA bus defines
+*/
+#define DE4X5_EISA_IO_PORTS   0x0c00    /* I/O port base address, slot 0 */
+#define DE4X5_EISA_TOTAL_SIZE 0x100     /* I/O address extent */
+
+#define EISA_ALLOWED_IRQ_LIST  {5, 9, 10, 11}
+
+#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"}
+#define DE4X5_NAME_LENGTH 8
+
+static c_char *de4x5_signatures[] = DE4X5_SIGNATURE;
+
+/*
+** Ethernet PROM defines for DC21040
+*/
+#define PROBE_LENGTH    32
+#define ETH_PROM_SIG    0xAA5500FFUL
+
+/*
+** PCI Bus defines
+*/
+#define PCI_MAX_BUS_NUM      8
+#define DE4X5_PCI_TOTAL_SIZE 0x80       /* I/O address extent */
+#define DE4X5_CLASS_CODE     0x00020000 /* Network controller, Ethernet */
+
+/*
+** Memory Alignment. Each descriptor is 4 longwords long. To force a
+** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
+** DESC_ALIGN. ALIGN aligns the start address of the private memory area
+** and hence the RX descriptor ring's first entry.
+*/
+#define DE4X5_ALIGN4      ((u_long)4 - 1)     /* 1 longword align */
+#define DE4X5_ALIGN8      ((u_long)8 - 1)     /* 2 longword align */
+#define DE4X5_ALIGN16     ((u_long)16 - 1)    /* 4 longword align */
+#define DE4X5_ALIGN32     ((u_long)32 - 1)    /* 8 longword align */
+#define DE4X5_ALIGN64     ((u_long)64 - 1)    /* 16 longword align */
+#define DE4X5_ALIGN128    ((u_long)128 - 1)   /* 32 longword align */
+
+#define DE4X5_ALIGN         DE4X5_ALIGN32           /* Keep the DC21040 happy... */
+#define DE4X5_CACHE_ALIGN   CAL_16LONG
+#define DESC_SKIP_LEN DSL_0             /* Must agree with DESC_ALIGN */
+/*#define DESC_ALIGN    u32 dummy[4];  / * Must agree with DESC_SKIP_LEN */
+#define DESC_ALIGN
+
+#ifndef DEC_ONLY                        /* See README.de4x5 for using this */
+static int dec_only;
+#else
+static int dec_only = 1;
+#endif
+
+/*
+** DE4X5 IRQ ENABLE/DISABLE
+*/
+#define ENABLE_IRQs { \
+    imr |= lp->irq_en;\
+    outl(imr, DE4X5_IMR);               /* Enable the IRQs */\
+}
+
+#define DISABLE_IRQs {\
+    imr = inl(DE4X5_IMR);\
+    imr &= ~lp->irq_en;\
+    outl(imr, DE4X5_IMR);               /* Disable the IRQs */\
+}
+
+#define UNMASK_IRQs {\
+    imr |= lp->irq_mask;\
+    outl(imr, DE4X5_IMR);               /* Unmask the IRQs */\
+}
+
+#define MASK_IRQs {\
+    imr = inl(DE4X5_IMR);\
+    imr &= ~lp->irq_mask;\
+    outl(imr, DE4X5_IMR);               /* Mask the IRQs */\
+}
+
+/*
+** DE4X5 START/STOP
+*/
+#define START_DE4X5 {\
+    omr = inl(DE4X5_OMR);\
+    omr |= OMR_ST | OMR_SR;\
+    outl(omr, DE4X5_OMR);               /* Enable the TX and/or RX */\
+}
+
+#define STOP_DE4X5 {\
+    omr = inl(DE4X5_OMR);\
+    omr &= ~(OMR_ST|OMR_SR);\
+    outl(omr, DE4X5_OMR);               /* Disable the TX and/or RX */ \
+}
+
+/*
+** DE4X5 SIA RESET
+*/
+#define RESET_SIA outl(0, DE4X5_SICR);  /* Reset SIA connectivity regs */
+
+/*
+** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS)
+*/
+#define DE4X5_AUTOSENSE_MS  250
+
+/*
+** SROM Structure
+*/
+struct de4x5_srom {
+    char sub_vendor_id[2];
+    char sub_system_id[2];
+    char reserved[12];
+    char id_block_crc;
+    char reserved2;
+    char version;
+    char num_controllers;
+    char ieee_addr[6];
+    char info[100];
+    short chksum;
+};
+#define SUB_VENDOR_ID 0x500a
+
+/*
+** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous
+** and have sizes of both a power of 2 and a multiple of 4.
+** A size of 256 bytes for each buffer could be chosen because over 90% of
+** all packets in our network are <256 bytes long and 64 longword alignment
+** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX
+** descriptors are needed for machines with an ALPHA CPU.
+*/
+#define NUM_RX_DESC 8                   /* Number of RX descriptors   */
+#define NUM_TX_DESC 32                  /* Number of TX descriptors   */
+#define RX_BUFF_SZ  1536                /* Power of 2 for kmalloc and */
+                                        /* Multiple of 4 for DC21040  */
+                                        /* Allows 512 byte alignment  */
+struct de4x5_desc {
+    volatile __le32 status;
+    __le32 des1;
+    __le32 buf;
+    __le32 next;
+    DESC_ALIGN
+};
+
+/*
+** The DE4X5 private structure
+*/
+#define DE4X5_PKT_STAT_SZ 16
+#define DE4X5_PKT_BIN_SZ  128            /* Should be >=100 unless you
+                                            increase DE4X5_PKT_STAT_SZ */
+
+struct pkt_stats {
+	u_int bins[DE4X5_PKT_STAT_SZ];      /* Private stats counters       */
+	u_int unicast;
+	u_int multicast;
+	u_int broadcast;
+	u_int excessive_collisions;
+	u_int tx_underruns;
+	u_int excessive_underruns;
+	u_int rx_runt_frames;
+	u_int rx_collision;
+	u_int rx_dribble;
+	u_int rx_overflow;
+};
+
+struct de4x5_private {
+    char adapter_name[80];                  /* Adapter name                 */
+    u_long interrupt;                       /* Aligned ISR flag             */
+    struct de4x5_desc *rx_ring;		    /* RX descriptor ring           */
+    struct de4x5_desc *tx_ring;		    /* TX descriptor ring           */
+    struct sk_buff *tx_skb[NUM_TX_DESC];    /* TX skb for freeing when sent */
+    struct sk_buff *rx_skb[NUM_RX_DESC];    /* RX skb's                     */
+    int rx_new, rx_old;                     /* RX descriptor ring pointers  */
+    int tx_new, tx_old;                     /* TX descriptor ring pointers  */
+    char setup_frame[SETUP_FRAME_LEN];      /* Holds MCA and PA info.       */
+    char frame[64];                         /* Min sized packet for loopback*/
+    spinlock_t lock;                        /* Adapter specific spinlock    */
+    struct net_device_stats stats;          /* Public stats                 */
+    struct pkt_stats pktStats;	            /* Private stats counters	    */
+    char rxRingSize;
+    char txRingSize;
+    int  bus;                               /* EISA or PCI                  */
+    int  bus_num;                           /* PCI Bus number               */
+    int  device;                            /* Device number on PCI bus     */
+    int  state;                             /* Adapter OPENED or CLOSED     */
+    int  chipset;                           /* DC21040, DC21041 or DC21140  */
+    s32  irq_mask;                          /* Interrupt Mask (Enable) bits */
+    s32  irq_en;                            /* Summary interrupt bits       */
+    int  media;                             /* Media (eg TP), mode (eg 100B)*/
+    int  c_media;                           /* Remember the last media conn */
+    bool fdx;                               /* media full duplex flag       */
+    int  linkOK;                            /* Link is OK                   */
+    int  autosense;                         /* Allow/disallow autosensing   */
+    bool tx_enable;                         /* Enable descriptor polling    */
+    int  setup_f;                           /* Setup frame filtering type   */
+    int  local_state;                       /* State within a 'media' state */
+    struct mii_phy phy[DE4X5_MAX_PHY];      /* List of attached PHY devices */
+    struct sia_phy sia;                     /* SIA PHY Information          */
+    int  active;                            /* Index to active PHY device   */
+    int  mii_cnt;                           /* Number of attached PHY's     */
+    int  timeout;                           /* Scheduling counter           */
+    struct timer_list timer;                /* Timer info for kernel        */
+    int tmp;                                /* Temporary global per card    */
+    struct {
+	u_long lock;                        /* Lock the cache accesses      */
+	s32 csr0;                           /* Saved Bus Mode Register      */
+	s32 csr6;                           /* Saved Operating Mode Reg.    */
+	s32 csr7;                           /* Saved IRQ Mask Register      */
+	s32 gep;                            /* Saved General Purpose Reg.   */
+	s32 gepc;                           /* Control info for GEP         */
+	s32 csr13;                          /* Saved SIA Connectivity Reg.  */
+	s32 csr14;                          /* Saved SIA TX/RX Register     */
+	s32 csr15;                          /* Saved SIA General Register   */
+	int save_cnt;                       /* Flag if state already saved  */
+	struct sk_buff_head queue;          /* Save the (re-ordered) skb's  */
+    } cache;
+    struct de4x5_srom srom;                 /* A copy of the SROM           */
+    int cfrv;				    /* Card CFRV copy */
+    int rx_ovf;                             /* Check for 'RX overflow' tag  */
+    bool useSROM;                           /* For non-DEC card use SROM    */
+    bool useMII;                            /* Infoblock using the MII      */
+    int asBitValid;                         /* Autosense bits in GEP?       */
+    int asPolarity;                         /* 0 => asserted high           */
+    int asBit;                              /* Autosense bit number in GEP  */
+    int defMedium;                          /* SROM default medium          */
+    int tcount;                             /* Last infoblock number        */
+    int infoblock_init;                     /* Initialised this infoblock?  */
+    int infoleaf_offset;                    /* SROM infoleaf for controller */
+    s32 infoblock_csr6;                     /* csr6 value in SROM infoblock */
+    int infoblock_media;                    /* infoblock media              */
+    int (*infoleaf_fn)(struct net_device *);    /* Pointer to infoleaf function */
+    u_char *rst;                            /* Pointer to Type 5 reset info */
+    u_char  ibn;                            /* Infoblock number             */
+    struct parameters params;               /* Command line/ #defined params */
+    struct device *gendev;	            /* Generic device */
+    dma_addr_t dma_rings;		    /* DMA handle for rings	    */
+    int dma_size;			    /* Size of the DMA area	    */
+    char *rx_bufs;			    /* rx bufs on alpha, sparc, ... */
+};
+
+/*
+** To get around certain poxy cards that don't provide an SROM
+** for the second and more DECchip, I have to key off the first
+** chip's address. I'll assume there's not a bad SROM iff:
+**
+**      o the chipset is the same
+**      o the bus number is the same and > 0
+**      o the sum of all the returned hw address bytes is 0 or 0x5fa
+**
+** Also have to save the irq for those cards whose hardware designers
+** can't follow the PCI to PCI Bridge Architecture spec.
+*/
+static struct {
+    int chipset;
+    int bus;
+    int irq;
+    u_char addr[ETH_ALEN];
+} last = {0,};
+
+/*
+** The transmit ring full condition is described by the tx_old and tx_new
+** pointers by:
+**    tx_old            = tx_new    Empty ring
+**    tx_old            = tx_new+1  Full ring
+**    tx_old+txRingSize = tx_new+1  Full ring  (wrapped condition)
+*/
+#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
+			lp->tx_old+lp->txRingSize-lp->tx_new-1:\
+			lp->tx_old               -lp->tx_new-1)
+
+#define TX_PKT_PENDING (lp->tx_old != lp->tx_new)
+
+/*
+** Public Functions
+*/
+static int     de4x5_open(struct net_device *dev);
+static netdev_tx_t de4x5_queue_pkt(struct sk_buff *skb,
+					 struct net_device *dev);
+static irqreturn_t de4x5_interrupt(int irq, void *dev_id);
+static int     de4x5_close(struct net_device *dev);
+static struct  net_device_stats *de4x5_get_stats(struct net_device *dev);
+static void    de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len);
+static void    set_multicast_list(struct net_device *dev);
+static int     de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+
+/*
+** Private functions
+*/
+static int     de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev);
+static int     de4x5_init(struct net_device *dev);
+static int     de4x5_sw_reset(struct net_device *dev);
+static int     de4x5_rx(struct net_device *dev);
+static int     de4x5_tx(struct net_device *dev);
+static void    de4x5_ast(struct net_device *dev);
+static int     de4x5_txur(struct net_device *dev);
+static int     de4x5_rx_ovfc(struct net_device *dev);
+
+static int     autoconf_media(struct net_device *dev);
+static void    create_packet(struct net_device *dev, char *frame, int len);
+static void    load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb);
+static int     dc21040_autoconf(struct net_device *dev);
+static int     dc21041_autoconf(struct net_device *dev);
+static int     dc21140m_autoconf(struct net_device *dev);
+static int     dc2114x_autoconf(struct net_device *dev);
+static int     srom_autoconf(struct net_device *dev);
+static int     de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *));
+static int     dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int));
+static int     test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec);
+static int     test_for_100Mb(struct net_device *dev, int msec);
+static int     wait_for_link(struct net_device *dev);
+static int     test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec);
+static int     is_spd_100(struct net_device *dev);
+static int     is_100_up(struct net_device *dev);
+static int     is_10_up(struct net_device *dev);
+static int     is_anc_capable(struct net_device *dev);
+static int     ping_media(struct net_device *dev, int msec);
+static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len);
+static void    de4x5_free_rx_buffs(struct net_device *dev);
+static void    de4x5_free_tx_buffs(struct net_device *dev);
+static void    de4x5_save_skbs(struct net_device *dev);
+static void    de4x5_rst_desc_ring(struct net_device *dev);
+static void    de4x5_cache_state(struct net_device *dev, int flag);
+static void    de4x5_put_cache(struct net_device *dev, struct sk_buff *skb);
+static void    de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb);
+static struct  sk_buff *de4x5_get_cache(struct net_device *dev);
+static void    de4x5_setup_intr(struct net_device *dev);
+static void    de4x5_init_connection(struct net_device *dev);
+static int     de4x5_reset_phy(struct net_device *dev);
+static void    reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr);
+static int     test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec);
+static int     test_tp(struct net_device *dev, s32 msec);
+static int     EISA_signature(char *name, struct device *device);
+static int     PCI_signature(char *name, struct de4x5_private *lp);
+static void    DevicePresent(struct net_device *dev, u_long iobase);
+static void    enet_addr_rst(u_long aprom_addr);
+static int     de4x5_bad_srom(struct de4x5_private *lp);
+static short   srom_rd(u_long address, u_char offset);
+static void    srom_latch(u_int command, u_long address);
+static void    srom_command(u_int command, u_long address);
+static void    srom_address(u_int command, u_long address, u_char offset);
+static short   srom_data(u_int command, u_long address);
+/*static void    srom_busy(u_int command, u_long address);*/
+static void    sendto_srom(u_int command, u_long addr);
+static int     getfrom_srom(u_long addr);
+static int     srom_map_media(struct net_device *dev);
+static int     srom_infoleaf_info(struct net_device *dev);
+static void    srom_init(struct net_device *dev);
+static void    srom_exec(struct net_device *dev, u_char *p);
+static int     mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr);
+static void    mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr);
+static int     mii_rdata(u_long ioaddr);
+static void    mii_wdata(int data, int len, u_long ioaddr);
+static void    mii_ta(u_long rw, u_long ioaddr);
+static int     mii_swap(int data, int len);
+static void    mii_address(u_char addr, u_long ioaddr);
+static void    sendto_mii(u32 command, int data, u_long ioaddr);
+static int     getfrom_mii(u32 command, u_long ioaddr);
+static int     mii_get_oui(u_char phyaddr, u_long ioaddr);
+static int     mii_get_phy(struct net_device *dev);
+static void    SetMulticastFilter(struct net_device *dev);
+static int     get_hw_addr(struct net_device *dev);
+static void    srom_repair(struct net_device *dev, int card);
+static int     test_bad_enet(struct net_device *dev, int status);
+static int     an_exception(struct de4x5_private *lp);
+static char    *build_setup_frame(struct net_device *dev, int mode);
+static void    disable_ast(struct net_device *dev);
+static long    de4x5_switch_mac_port(struct net_device *dev);
+static int     gep_rd(struct net_device *dev);
+static void    gep_wr(s32 data, struct net_device *dev);
+static void    yawn(struct net_device *dev, int state);
+static void    de4x5_parse_params(struct net_device *dev);
+static void    de4x5_dbg_open(struct net_device *dev);
+static void    de4x5_dbg_mii(struct net_device *dev, int k);
+static void    de4x5_dbg_media(struct net_device *dev);
+static void    de4x5_dbg_srom(struct de4x5_srom *p);
+static void    de4x5_dbg_rx(struct sk_buff *skb, int len);
+static int     de4x5_strncmp(char *a, char *b, int n);
+static int     dc21041_infoleaf(struct net_device *dev);
+static int     dc21140_infoleaf(struct net_device *dev);
+static int     dc21142_infoleaf(struct net_device *dev);
+static int     dc21143_infoleaf(struct net_device *dev);
+static int     type0_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int     type1_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int     type2_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int     type3_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int     type4_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int     type5_infoblock(struct net_device *dev, u_char count, u_char *p);
+static int     compact_infoblock(struct net_device *dev, u_char count, u_char *p);
+
+/*
+** Note now that module autoprobing is allowed under EISA and PCI. The
+** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes
+** to "do the right thing".
+*/
+
+static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED        */
+
+module_param(io, int, 0);
+module_param(de4x5_debug, int, 0);
+module_param(dec_only, int, 0);
+module_param(args, charp, 0);
+
+MODULE_PARM_DESC(io, "de4x5 I/O base address");
+MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask");
+MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)");
+MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details");
+MODULE_LICENSE("GPL");
+
+/*
+** List the SROM infoleaf functions and chipsets
+*/
+struct InfoLeaf {
+    int chipset;
+    int (*fn)(struct net_device *);
+};
+static struct InfoLeaf infoleaf_array[] = {
+    {DC21041, dc21041_infoleaf},
+    {DC21140, dc21140_infoleaf},
+    {DC21142, dc21142_infoleaf},
+    {DC21143, dc21143_infoleaf}
+};
+#define INFOLEAF_SIZE ARRAY_SIZE(infoleaf_array)
+
+/*
+** List the SROM info block functions
+*/
+static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = {
+    type0_infoblock,
+    type1_infoblock,
+    type2_infoblock,
+    type3_infoblock,
+    type4_infoblock,
+    type5_infoblock,
+    compact_infoblock
+};
+
+#define COMPACT (ARRAY_SIZE(dc_infoblock) - 1)
+
+/*
+** Miscellaneous defines...
+*/
+#define RESET_DE4X5 {\
+    int i;\
+    i=inl(DE4X5_BMR);\
+    mdelay(1);\
+    outl(i | BMR_SWR, DE4X5_BMR);\
+    mdelay(1);\
+    outl(i, DE4X5_BMR);\
+    mdelay(1);\
+    for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\
+    mdelay(1);\
+}
+
+#define PHY_HARD_RESET {\
+    outl(GEP_HRST, DE4X5_GEP);           /* Hard RESET the PHY dev. */\
+    mdelay(1);                           /* Assert for 1ms */\
+    outl(0x00, DE4X5_GEP);\
+    mdelay(2);                           /* Wait for 2ms */\
+}
+
+static const struct net_device_ops de4x5_netdev_ops = {
+    .ndo_open		= de4x5_open,
+    .ndo_stop		= de4x5_close,
+    .ndo_start_xmit	= de4x5_queue_pkt,
+    .ndo_get_stats	= de4x5_get_stats,
+    .ndo_set_rx_mode	= set_multicast_list,
+    .ndo_do_ioctl	= de4x5_ioctl,
+    .ndo_change_mtu	= eth_change_mtu,
+    .ndo_set_mac_address= eth_mac_addr,
+    .ndo_validate_addr	= eth_validate_addr,
+};
+
+
+static int __devinit
+de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
+{
+    char name[DE4X5_NAME_LENGTH + 1];
+    struct de4x5_private *lp = netdev_priv(dev);
+    struct pci_dev *pdev = NULL;
+    int i, status=0;
+
+    dev_set_drvdata(gendev, dev);
+
+    /* Ensure we're not sleeping */
+    if (lp->bus == EISA) {
+	outb(WAKEUP, PCI_CFPM);
+    } else {
+	pdev = to_pci_dev (gendev);
+	pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
+    }
+    mdelay(10);
+
+    RESET_DE4X5;
+
+    if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) {
+	return -ENXIO;                       /* Hardware could not reset */
+    }
+
+    /*
+    ** Now find out what kind of DC21040/DC21041/DC21140 board we have.
+    */
+    lp->useSROM = false;
+    if (lp->bus == PCI) {
+	PCI_signature(name, lp);
+    } else {
+	EISA_signature(name, gendev);
+    }
+
+    if (*name == '\0') {                     /* Not found a board signature */
+	return -ENXIO;
+    }
+
+    dev->base_addr = iobase;
+    printk ("%s: %s at 0x%04lx", dev_name(gendev), name, iobase);
+
+    status = get_hw_addr(dev);
+    printk(", h/w address %pM\n", dev->dev_addr);
+
+    if (status != 0) {
+	printk("      which has an Ethernet PROM CRC error.\n");
+	return -ENXIO;
+    } else {
+	skb_queue_head_init(&lp->cache.queue);
+	lp->cache.gepc = GEP_INIT;
+	lp->asBit = GEP_SLNK;
+	lp->asPolarity = GEP_SLNK;
+	lp->asBitValid = ~0;
+	lp->timeout = -1;
+	lp->gendev = gendev;
+	spin_lock_init(&lp->lock);
+	init_timer(&lp->timer);
+	lp->timer.function = (void (*)(unsigned long))de4x5_ast;
+	lp->timer.data = (unsigned long)dev;
+	de4x5_parse_params(dev);
+
+	/*
+	** Choose correct autosensing in case someone messed up
+	*/
+        lp->autosense = lp->params.autosense;
+        if (lp->chipset != DC21140) {
+            if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) {
+                lp->params.autosense = TP;
+            }
+            if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) {
+                lp->params.autosense = BNC;
+            }
+        }
+	lp->fdx = lp->params.fdx;
+	sprintf(lp->adapter_name,"%s (%s)", name, dev_name(gendev));
+
+	lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
+#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
+	lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
+#endif
+	lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
+					 &lp->dma_rings, GFP_ATOMIC);
+	if (lp->rx_ring == NULL) {
+	    return -ENOMEM;
+	}
+
+	lp->tx_ring = lp->rx_ring + NUM_RX_DESC;
+
+	/*
+	** Set up the RX descriptor ring (Intels)
+	** Allocate contiguous receive buffers, long word aligned (Alphas)
+	*/
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
+	for (i=0; i<NUM_RX_DESC; i++) {
+	    lp->rx_ring[i].status = 0;
+	    lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
+	    lp->rx_ring[i].buf = 0;
+	    lp->rx_ring[i].next = 0;
+	    lp->rx_skb[i] = (struct sk_buff *) 1;     /* Dummy entry */
+	}
+
+#else
+	{
+		dma_addr_t dma_rx_bufs;
+
+		dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC)
+		      	* sizeof(struct de4x5_desc);
+		dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN;
+		lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC
+		      	+ NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN);
+		for (i=0; i<NUM_RX_DESC; i++) {
+	    		lp->rx_ring[i].status = 0;
+	    		lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
+	    		lp->rx_ring[i].buf =
+				cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ);
+	    		lp->rx_ring[i].next = 0;
+	    		lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */
+		}
+
+	}
+#endif
+
+	barrier();
+
+	lp->rxRingSize = NUM_RX_DESC;
+	lp->txRingSize = NUM_TX_DESC;
+
+	/* Write the end of list marker to the descriptor lists */
+	lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER);
+	lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER);
+
+	/* Tell the adapter where the TX/RX rings are located. */
+	outl(lp->dma_rings, DE4X5_RRBA);
+	outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
+	     DE4X5_TRBA);
+
+	/* Initialise the IRQ mask and Enable/Disable */
+	lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM;
+	lp->irq_en   = IMR_NIM | IMR_AIM;
+
+	/* Create a loopback packet frame for later media probing */
+	create_packet(dev, lp->frame, sizeof(lp->frame));
+
+	/* Check if the RX overflow bug needs testing for */
+	i = lp->cfrv & 0x000000fe;
+	if ((lp->chipset == DC21140) && (i == 0x20)) {
+	    lp->rx_ovf = 1;
+	}
+
+	/* Initialise the SROM pointers if possible */
+	if (lp->useSROM) {
+	    lp->state = INITIALISED;
+	    if (srom_infoleaf_info(dev)) {
+	        dma_free_coherent (gendev, lp->dma_size,
+			       lp->rx_ring, lp->dma_rings);
+		return -ENXIO;
+	    }
+	    srom_init(dev);
+	}
+
+	lp->state = CLOSED;
+
+	/*
+	** Check for an MII interface
+	*/
+	if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) {
+	    mii_get_phy(dev);
+	}
+
+	printk("      and requires IRQ%d (provided by %s).\n", dev->irq,
+	       ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
+    }
+
+    if (de4x5_debug & DEBUG_VERSION) {
+	printk(version);
+    }
+
+    /* The DE4X5-specific entries in the device structure. */
+    SET_NETDEV_DEV(dev, gendev);
+    dev->netdev_ops = &de4x5_netdev_ops;
+    dev->mem_start = 0;
+
+    /* Fill in the generic fields of the device structure. */
+    if ((status = register_netdev (dev))) {
+	    dma_free_coherent (gendev, lp->dma_size,
+			       lp->rx_ring, lp->dma_rings);
+	    return status;
+    }
+
+    /* Let the adapter sleep to save power */
+    yawn(dev, SLEEP);
+
+    return status;
+}
+
+
+static int
+de4x5_open(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int i, status = 0;
+    s32 omr;
+
+    /* Allocate the RX buffers */
+    for (i=0; i<lp->rxRingSize; i++) {
+	if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) {
+	    de4x5_free_rx_buffs(dev);
+	    return -EAGAIN;
+	}
+    }
+
+    /*
+    ** Wake up the adapter
+    */
+    yawn(dev, WAKEUP);
+
+    /*
+    ** Re-initialize the DE4X5...
+    */
+    status = de4x5_init(dev);
+    spin_lock_init(&lp->lock);
+    lp->state = OPEN;
+    de4x5_dbg_open(dev);
+
+    if (request_irq(dev->irq, de4x5_interrupt, IRQF_SHARED,
+		                                     lp->adapter_name, dev)) {
+	printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq);
+	if (request_irq(dev->irq, de4x5_interrupt, IRQF_DISABLED | IRQF_SHARED,
+			                             lp->adapter_name, dev)) {
+	    printk("\n              Cannot get IRQ- reconfigure your hardware.\n");
+	    disable_ast(dev);
+	    de4x5_free_rx_buffs(dev);
+	    de4x5_free_tx_buffs(dev);
+	    yawn(dev, SLEEP);
+	    lp->state = CLOSED;
+	    return -EAGAIN;
+	} else {
+	    printk("\n              Succeeded, but you should reconfigure your hardware to avoid this.\n");
+	    printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n");
+	}
+    }
+
+    lp->interrupt = UNMASK_INTERRUPTS;
+    dev->trans_start = jiffies; /* prevent tx timeout */
+
+    START_DE4X5;
+
+    de4x5_setup_intr(dev);
+
+    if (de4x5_debug & DEBUG_OPEN) {
+	printk("\tsts:  0x%08x\n", inl(DE4X5_STS));
+	printk("\tbmr:  0x%08x\n", inl(DE4X5_BMR));
+	printk("\timr:  0x%08x\n", inl(DE4X5_IMR));
+	printk("\tomr:  0x%08x\n", inl(DE4X5_OMR));
+	printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR));
+	printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR));
+	printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR));
+	printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR));
+    }
+
+    return status;
+}
+
+/*
+** Initialize the DE4X5 operating conditions. NB: a chip problem with the
+** DC21140 requires using perfect filtering mode for that chip. Since I can't
+** see why I'd want > 14 multicast addresses, I have changed all chips to use
+** the perfect filtering mode. Keep the DMA burst length at 8: there seems
+** to be data corruption problems if it is larger (UDP errors seen from a
+** ttcp source).
+*/
+static int
+de4x5_init(struct net_device *dev)
+{
+    /* Lock out other processes whilst setting up the hardware */
+    netif_stop_queue(dev);
+
+    de4x5_sw_reset(dev);
+
+    /* Autoconfigure the connected port */
+    autoconf_media(dev);
+
+    return 0;
+}
+
+static int
+de4x5_sw_reset(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int i, j, status = 0;
+    s32 bmr, omr;
+
+    /* Select the MII or SRL port now and RESET the MAC */
+    if (!lp->useSROM) {
+	if (lp->phy[lp->active].id != 0) {
+	    lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD;
+	} else {
+	    lp->infoblock_csr6 = OMR_SDP | OMR_TTM;
+	}
+	de4x5_switch_mac_port(dev);
+    }
+
+    /*
+    ** Set the programmable burst length to 8 longwords for all the DC21140
+    ** Fasternet chips and 4 longwords for all others: DMA errors result
+    ** without these values. Cache align 16 long.
+    */
+    bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN;
+    bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0);
+    outl(bmr, DE4X5_BMR);
+
+    omr = inl(DE4X5_OMR) & ~OMR_PR;             /* Turn off promiscuous mode */
+    if (lp->chipset == DC21140) {
+	omr |= (OMR_SDP | OMR_SB);
+    }
+    lp->setup_f = PERFECT;
+    outl(lp->dma_rings, DE4X5_RRBA);
+    outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
+	 DE4X5_TRBA);
+
+    lp->rx_new = lp->rx_old = 0;
+    lp->tx_new = lp->tx_old = 0;
+
+    for (i = 0; i < lp->rxRingSize; i++) {
+	lp->rx_ring[i].status = cpu_to_le32(R_OWN);
+    }
+
+    for (i = 0; i < lp->txRingSize; i++) {
+	lp->tx_ring[i].status = cpu_to_le32(0);
+    }
+
+    barrier();
+
+    /* Build the setup frame depending on filtering mode */
+    SetMulticastFilter(dev);
+
+    load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1);
+    outl(omr|OMR_ST, DE4X5_OMR);
+
+    /* Poll for setup frame completion (adapter interrupts are disabled now) */
+
+    for (j=0, i=0;(i<500) && (j==0);i++) {       /* Up to 500ms delay */
+	mdelay(1);
+	if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
+    }
+    outl(omr, DE4X5_OMR);                        /* Stop everything! */
+
+    if (j == 0) {
+	printk("%s: Setup frame timed out, status %08x\n", dev->name,
+	       inl(DE4X5_STS));
+	status = -EIO;
+    }
+
+    lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+    lp->tx_old = lp->tx_new;
+
+    return status;
+}
+
+/*
+** Writes a socket buffer address to the next available transmit descriptor.
+*/
+static netdev_tx_t
+de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    u_long flags = 0;
+
+    netif_stop_queue(dev);
+    if (!lp->tx_enable)                   /* Cannot send for now */
+	return NETDEV_TX_LOCKED;
+
+    /*
+    ** Clean out the TX ring asynchronously to interrupts - sometimes the
+    ** interrupts are lost by delayed descriptor status updates relative to
+    ** the irq assertion, especially with a busy PCI bus.
+    */
+    spin_lock_irqsave(&lp->lock, flags);
+    de4x5_tx(dev);
+    spin_unlock_irqrestore(&lp->lock, flags);
+
+    /* Test if cache is already locked - requeue skb if so */
+    if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt)
+	return NETDEV_TX_LOCKED;
+
+    /* Transmit descriptor ring full or stale skb */
+    if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) {
+	if (lp->interrupt) {
+	    de4x5_putb_cache(dev, skb);          /* Requeue the buffer */
+	} else {
+	    de4x5_put_cache(dev, skb);
+	}
+	if (de4x5_debug & DEBUG_TX) {
+	    printk("%s: transmit busy, lost media or stale skb found:\n  STS:%08x\n  tbusy:%d\n  IMR:%08x\n  OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO");
+	}
+    } else if (skb->len > 0) {
+	/* If we already have stuff queued locally, use that first */
+	if (!skb_queue_empty(&lp->cache.queue) && !lp->interrupt) {
+	    de4x5_put_cache(dev, skb);
+	    skb = de4x5_get_cache(dev);
+	}
+
+	while (skb && !netif_queue_stopped(dev) &&
+	       (u_long) lp->tx_skb[lp->tx_new] <= 1) {
+	    spin_lock_irqsave(&lp->lock, flags);
+	    netif_stop_queue(dev);
+	    load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb);
+ 	    lp->stats.tx_bytes += skb->len;
+	    outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */
+
+	    lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+
+	    if (TX_BUFFS_AVAIL) {
+		netif_start_queue(dev);         /* Another pkt may be queued */
+	    }
+	    skb = de4x5_get_cache(dev);
+	    spin_unlock_irqrestore(&lp->lock, flags);
+	}
+	if (skb) de4x5_putb_cache(dev, skb);
+    }
+
+    lp->cache.lock = 0;
+
+    return NETDEV_TX_OK;
+}
+
+/*
+** The DE4X5 interrupt handler.
+**
+** I/O Read/Writes through intermediate PCI bridges are never 'posted',
+** so that the asserted interrupt always has some real data to work with -
+** if these I/O accesses are ever changed to memory accesses, ensure the
+** STS write is read immediately to complete the transaction if the adapter
+** is not on bus 0. Lost interrupts can still occur when the PCI bus load
+** is high and descriptor status bits cannot be set before the associated
+** interrupt is asserted and this routine entered.
+*/
+static irqreturn_t
+de4x5_interrupt(int irq, void *dev_id)
+{
+    struct net_device *dev = dev_id;
+    struct de4x5_private *lp;
+    s32 imr, omr, sts, limit;
+    u_long iobase;
+    unsigned int handled = 0;
+
+    lp = netdev_priv(dev);
+    spin_lock(&lp->lock);
+    iobase = dev->base_addr;
+
+    DISABLE_IRQs;                        /* Ensure non re-entrancy */
+
+    if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt))
+	printk("%s: Re-entering the interrupt handler.\n", dev->name);
+
+    synchronize_irq(dev->irq);
+
+    for (limit=0; limit<8; limit++) {
+	sts = inl(DE4X5_STS);            /* Read IRQ status */
+	outl(sts, DE4X5_STS);            /* Reset the board interrupts */
+
+	if (!(sts & lp->irq_mask)) break;/* All done */
+	handled = 1;
+
+	if (sts & (STS_RI | STS_RU))     /* Rx interrupt (packet[s] arrived) */
+	  de4x5_rx(dev);
+
+	if (sts & (STS_TI | STS_TU))     /* Tx interrupt (packet sent) */
+	  de4x5_tx(dev);
+
+	if (sts & STS_LNF) {             /* TP Link has failed */
+	    lp->irq_mask &= ~IMR_LFM;
+	}
+
+	if (sts & STS_UNF) {             /* Transmit underrun */
+	    de4x5_txur(dev);
+	}
+
+	if (sts & STS_SE) {              /* Bus Error */
+	    STOP_DE4X5;
+	    printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n",
+		   dev->name, sts);
+	    spin_unlock(&lp->lock);
+	    return IRQ_HANDLED;
+	}
+    }
+
+    /* Load the TX ring with any locally stored packets */
+    if (!test_and_set_bit(0, (void *)&lp->cache.lock)) {
+	while (!skb_queue_empty(&lp->cache.queue) && !netif_queue_stopped(dev) && lp->tx_enable) {
+	    de4x5_queue_pkt(de4x5_get_cache(dev), dev);
+	}
+	lp->cache.lock = 0;
+    }
+
+    lp->interrupt = UNMASK_INTERRUPTS;
+    ENABLE_IRQs;
+    spin_unlock(&lp->lock);
+
+    return IRQ_RETVAL(handled);
+}
+
+static int
+de4x5_rx(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int entry;
+    s32 status;
+
+    for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0;
+	                                                    entry=lp->rx_new) {
+	status = (s32)le32_to_cpu(lp->rx_ring[entry].status);
+
+	if (lp->rx_ovf) {
+	    if (inl(DE4X5_MFC) & MFC_FOCM) {
+		de4x5_rx_ovfc(dev);
+		break;
+	    }
+	}
+
+	if (status & RD_FS) {                 /* Remember the start of frame */
+	    lp->rx_old = entry;
+	}
+
+	if (status & RD_LS) {                 /* Valid frame status */
+	    if (lp->tx_enable) lp->linkOK++;
+	    if (status & RD_ES) {	      /* There was an error. */
+		lp->stats.rx_errors++;        /* Update the error stats. */
+		if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++;
+		if (status & RD_CE)           lp->stats.rx_crc_errors++;
+		if (status & RD_OF)           lp->stats.rx_fifo_errors++;
+		if (status & RD_TL)           lp->stats.rx_length_errors++;
+		if (status & RD_RF)           lp->pktStats.rx_runt_frames++;
+		if (status & RD_CS)           lp->pktStats.rx_collision++;
+		if (status & RD_DB)           lp->pktStats.rx_dribble++;
+		if (status & RD_OF)           lp->pktStats.rx_overflow++;
+	    } else {                          /* A valid frame received */
+		struct sk_buff *skb;
+		short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status)
+					                            >> 16) - 4;
+
+		if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) {
+		    printk("%s: Insufficient memory; nuking packet.\n",
+			                                            dev->name);
+		    lp->stats.rx_dropped++;
+		} else {
+		    de4x5_dbg_rx(skb, pkt_len);
+
+		    /* Push up the protocol stack */
+		    skb->protocol=eth_type_trans(skb,dev);
+		    de4x5_local_stats(dev, skb->data, pkt_len);
+		    netif_rx(skb);
+
+		    /* Update stats */
+		    lp->stats.rx_packets++;
+ 		    lp->stats.rx_bytes += pkt_len;
+		}
+	    }
+
+	    /* Change buffer ownership for this frame, back to the adapter */
+	    for (;lp->rx_old!=entry;lp->rx_old=(lp->rx_old + 1)%lp->rxRingSize) {
+		lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN);
+		barrier();
+	    }
+	    lp->rx_ring[entry].status = cpu_to_le32(R_OWN);
+	    barrier();
+	}
+
+	/*
+	** Update entry information
+	*/
+	lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize;
+    }
+
+    return 0;
+}
+
+static inline void
+de4x5_free_tx_buff(struct de4x5_private *lp, int entry)
+{
+    dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf),
+		     le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1,
+		     DMA_TO_DEVICE);
+    if ((u_long) lp->tx_skb[entry] > 1)
+	dev_kfree_skb_irq(lp->tx_skb[entry]);
+    lp->tx_skb[entry] = NULL;
+}
+
+/*
+** Buffer sent - check for TX buffer errors.
+*/
+static int
+de4x5_tx(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int entry;
+    s32 status;
+
+    for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
+	status = (s32)le32_to_cpu(lp->tx_ring[entry].status);
+	if (status < 0) {                     /* Buffer not sent yet */
+	    break;
+	} else if (status != 0x7fffffff) {    /* Not setup frame */
+	    if (status & TD_ES) {             /* An error happened */
+		lp->stats.tx_errors++;
+		if (status & TD_NC) lp->stats.tx_carrier_errors++;
+		if (status & TD_LC) lp->stats.tx_window_errors++;
+		if (status & TD_UF) lp->stats.tx_fifo_errors++;
+		if (status & TD_EC) lp->pktStats.excessive_collisions++;
+		if (status & TD_DE) lp->stats.tx_aborted_errors++;
+
+		if (TX_PKT_PENDING) {
+		    outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */
+		}
+	    } else {                      /* Packet sent */
+		lp->stats.tx_packets++;
+		if (lp->tx_enable) lp->linkOK++;
+	    }
+	    /* Update the collision counter */
+	    lp->stats.collisions += ((status & TD_EC) ? 16 :
+				                      ((status & TD_CC) >> 3));
+
+	    /* Free the buffer. */
+	    if (lp->tx_skb[entry] != NULL)
+	    	de4x5_free_tx_buff(lp, entry);
+	}
+
+	/* Update all the pointers */
+	lp->tx_old = (lp->tx_old + 1) % lp->txRingSize;
+    }
+
+    /* Any resources available? */
+    if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) {
+	if (lp->interrupt)
+	    netif_wake_queue(dev);
+	else
+	    netif_start_queue(dev);
+    }
+
+    return 0;
+}
+
+static void
+de4x5_ast(struct net_device *dev)
+{
+	struct de4x5_private *lp = netdev_priv(dev);
+	int next_tick = DE4X5_AUTOSENSE_MS;
+	int dt;
+
+	if (lp->useSROM)
+		next_tick = srom_autoconf(dev);
+	else if (lp->chipset == DC21140)
+		next_tick = dc21140m_autoconf(dev);
+	else if (lp->chipset == DC21041)
+		next_tick = dc21041_autoconf(dev);
+	else if (lp->chipset == DC21040)
+		next_tick = dc21040_autoconf(dev);
+	lp->linkOK = 0;
+
+	dt = (next_tick * HZ) / 1000;
+
+	if (!dt)
+		dt = 1;
+
+	mod_timer(&lp->timer, jiffies + dt);
+}
+
+static int
+de4x5_txur(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int omr;
+
+    omr = inl(DE4X5_OMR);
+    if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) {
+	omr &= ~(OMR_ST|OMR_SR);
+	outl(omr, DE4X5_OMR);
+	while (inl(DE4X5_STS) & STS_TS);
+	if ((omr & OMR_TR) < OMR_TR) {
+	    omr += 0x4000;
+	} else {
+	    omr |= OMR_SF;
+	}
+	outl(omr | OMR_ST | OMR_SR, DE4X5_OMR);
+    }
+
+    return 0;
+}
+
+static int
+de4x5_rx_ovfc(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int omr;
+
+    omr = inl(DE4X5_OMR);
+    outl(omr & ~OMR_SR, DE4X5_OMR);
+    while (inl(DE4X5_STS) & STS_RS);
+
+    for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) {
+	lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN);
+	lp->rx_new = (lp->rx_new + 1) % lp->rxRingSize;
+    }
+
+    outl(omr, DE4X5_OMR);
+
+    return 0;
+}
+
+static int
+de4x5_close(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 imr, omr;
+
+    disable_ast(dev);
+
+    netif_stop_queue(dev);
+
+    if (de4x5_debug & DEBUG_CLOSE) {
+	printk("%s: Shutting down ethercard, status was %8.8x.\n",
+	       dev->name, inl(DE4X5_STS));
+    }
+
+    /*
+    ** We stop the DE4X5 here... mask interrupts and stop TX & RX
+    */
+    DISABLE_IRQs;
+    STOP_DE4X5;
+
+    /* Free the associated irq */
+    free_irq(dev->irq, dev);
+    lp->state = CLOSED;
+
+    /* Free any socket buffers */
+    de4x5_free_rx_buffs(dev);
+    de4x5_free_tx_buffs(dev);
+
+    /* Put the adapter to sleep to save power */
+    yawn(dev, SLEEP);
+
+    return 0;
+}
+
+static struct net_device_stats *
+de4x5_get_stats(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR));
+
+    return &lp->stats;
+}
+
+static void
+de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i;
+
+    for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) {
+        if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) {
+	    lp->pktStats.bins[i]++;
+	    i = DE4X5_PKT_STAT_SZ;
+	}
+    }
+    if (is_multicast_ether_addr(buf)) {
+        if (is_broadcast_ether_addr(buf)) {
+	    lp->pktStats.broadcast++;
+	} else {
+	    lp->pktStats.multicast++;
+	}
+    } else if (compare_ether_addr(buf, dev->dev_addr) == 0) {
+        lp->pktStats.unicast++;
+    }
+
+    lp->pktStats.bins[0]++;       /* Duplicates stats.rx_packets */
+    if (lp->pktStats.bins[0] == 0) { /* Reset counters */
+        memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
+    }
+}
+
+/*
+** Removes the TD_IC flag from previous descriptor to improve TX performance.
+** If the flag is changed on a descriptor that is being read by the hardware,
+** I assume PCI transaction ordering will mean you are either successful or
+** just miss asserting the change to the hardware. Anyway you're messing with
+** a descriptor you don't own, but this shouldn't kill the chip provided
+** the descriptor register is read only to the hardware.
+*/
+static void
+load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1);
+    dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE);
+
+    lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma);
+    lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER);
+    lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags);
+    lp->tx_skb[lp->tx_new] = skb;
+    lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC);
+    barrier();
+
+    lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN);
+    barrier();
+}
+
+/*
+** Set or clear the multicast filter for this adaptor.
+*/
+static void
+set_multicast_list(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    /* First, double check that the adapter is open */
+    if (lp->state == OPEN) {
+	if (dev->flags & IFF_PROMISC) {         /* set promiscuous mode */
+	    u32 omr;
+	    omr = inl(DE4X5_OMR);
+	    omr |= OMR_PR;
+	    outl(omr, DE4X5_OMR);
+	} else {
+	    SetMulticastFilter(dev);
+	    load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
+			                                SETUP_FRAME_LEN, (struct sk_buff *)1);
+
+	    lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+	    outl(POLL_DEMAND, DE4X5_TPD);       /* Start the TX */
+	    dev->trans_start = jiffies; /* prevent tx timeout */
+	}
+    }
+}
+
+/*
+** Calculate the hash code and update the logical address filter
+** from a list of ethernet multicast addresses.
+** Little endian crc one liner from Matt Thomas, DEC.
+*/
+static void
+SetMulticastFilter(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    struct netdev_hw_addr *ha;
+    u_long iobase = dev->base_addr;
+    int i, bit, byte;
+    u16 hashcode;
+    u32 omr, crc;
+    char *pa;
+    unsigned char *addrs;
+
+    omr = inl(DE4X5_OMR);
+    omr &= ~(OMR_PR | OMR_PM);
+    pa = build_setup_frame(dev, ALL);        /* Build the basic frame */
+
+    if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 14)) {
+	omr |= OMR_PM;                       /* Pass all multicasts */
+    } else if (lp->setup_f == HASH_PERF) {   /* Hash Filtering */
+	netdev_for_each_mc_addr(ha, dev) {
+		crc = ether_crc_le(ETH_ALEN, ha->addr);
+		hashcode = crc & HASH_BITS;  /* hashcode is 9 LSb of CRC */
+
+		byte = hashcode >> 3;        /* bit[3-8] -> byte in filter */
+		bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */
+
+		byte <<= 1;                  /* calc offset into setup frame */
+		if (byte & 0x02) {
+		    byte -= 1;
+		}
+		lp->setup_frame[byte] |= bit;
+	}
+    } else {                                 /* Perfect filtering */
+	netdev_for_each_mc_addr(ha, dev) {
+	    addrs = ha->addr;
+	    for (i=0; i<ETH_ALEN; i++) {
+		*(pa + (i&1)) = *addrs++;
+		if (i & 0x01) pa += 4;
+	    }
+	}
+    }
+    outl(omr, DE4X5_OMR);
+}
+
+#ifdef CONFIG_EISA
+
+static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST;
+
+static int __init de4x5_eisa_probe (struct device *gendev)
+{
+	struct eisa_device *edev;
+	u_long iobase;
+	u_char irq, regval;
+	u_short vendor;
+	u32 cfid;
+	int status, device;
+	struct net_device *dev;
+	struct de4x5_private *lp;
+
+	edev = to_eisa_device (gendev);
+	iobase = edev->base_addr;
+
+	if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5"))
+		return -EBUSY;
+
+	if (!request_region (iobase + DE4X5_EISA_IO_PORTS,
+			     DE4X5_EISA_TOTAL_SIZE, "de4x5")) {
+		status = -EBUSY;
+		goto release_reg_1;
+	}
+
+	if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
+		status = -ENOMEM;
+		goto release_reg_2;
+	}
+	lp = netdev_priv(dev);
+
+	cfid = (u32) inl(PCI_CFID);
+	lp->cfrv = (u_short) inl(PCI_CFRV);
+	device = (cfid >> 8) & 0x00ffff00;
+	vendor = (u_short) cfid;
+
+	/* Read the EISA Configuration Registers */
+	regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT);
+#ifdef CONFIG_ALPHA
+	/* Looks like the Jensen firmware (rev 2.2) doesn't really
+	 * care about the EISA configuration, and thus doesn't
+	 * configure the PLX bridge properly. Oh well... Simply mimic
+	 * the EISA config file to sort it out. */
+
+	/* EISA REG1: Assert DecChip 21040 HW Reset */
+	outb (ER1_IAM | 1, EISA_REG1);
+	mdelay (1);
+
+        /* EISA REG1: Deassert DecChip 21040 HW Reset */
+	outb (ER1_IAM, EISA_REG1);
+	mdelay (1);
+
+	/* EISA REG3: R/W Burst Transfer Enable */
+	outb (ER3_BWE | ER3_BRE, EISA_REG3);
+
+	/* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */
+	outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0);
+#endif
+	irq = de4x5_irq[(regval >> 1) & 0x03];
+
+	if (is_DC2114x) {
+	    device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+	}
+	lp->chipset = device;
+	lp->bus = EISA;
+
+	/* Write the PCI Configuration Registers */
+	outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS);
+	outl(0x00006000, PCI_CFLT);
+	outl(iobase, PCI_CBIO);
+
+	DevicePresent(dev, EISA_APROM);
+
+	dev->irq = irq;
+
+	if (!(status = de4x5_hw_init (dev, iobase, gendev))) {
+		return 0;
+	}
+
+	free_netdev (dev);
+ release_reg_2:
+	release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
+ release_reg_1:
+	release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
+
+	return status;
+}
+
+static int __devexit de4x5_eisa_remove (struct device *device)
+{
+	struct net_device *dev;
+	u_long iobase;
+
+	dev = dev_get_drvdata(device);
+	iobase = dev->base_addr;
+
+	unregister_netdev (dev);
+	free_netdev (dev);
+	release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE);
+	release_region (iobase, DE4X5_EISA_TOTAL_SIZE);
+
+	return 0;
+}
+
+static struct eisa_device_id de4x5_eisa_ids[] = {
+        { "DEC4250", 0 },	/* 0 is the board name index... */
+        { "" }
+};
+MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
+
+static struct eisa_driver de4x5_eisa_driver = {
+        .id_table = de4x5_eisa_ids,
+        .driver   = {
+                .name    = "de4x5",
+                .probe   = de4x5_eisa_probe,
+                .remove  = __devexit_p (de4x5_eisa_remove),
+        }
+};
+MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
+#endif
+
+#ifdef CONFIG_PCI
+
+/*
+** This function searches the current bus (which is >0) for a DECchip with an
+** SROM, so that in multiport cards that have one SROM shared between multiple
+** DECchips, we can find the base SROM irrespective of the BIOS scan direction.
+** For single port cards this is a time waster...
+*/
+static void __devinit
+srom_search(struct net_device *dev, struct pci_dev *pdev)
+{
+    u_char pb;
+    u_short vendor, status;
+    u_int irq = 0, device;
+    u_long iobase = 0;                     /* Clear upper 32 bits in Alphas */
+    int i, j;
+    struct de4x5_private *lp = netdev_priv(dev);
+    struct list_head *walk;
+
+    list_for_each(walk, &pdev->bus_list) {
+	struct pci_dev *this_dev = pci_dev_b(walk);
+
+	/* Skip the pci_bus list entry */
+	if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue;
+
+	vendor = this_dev->vendor;
+	device = this_dev->device << 8;
+	if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue;
+
+	/* Get the chip configuration revision register */
+	pb = this_dev->bus->number;
+
+	/* Set the device number information */
+	lp->device = PCI_SLOT(this_dev->devfn);
+	lp->bus_num = pb;
+
+	/* Set the chipset information */
+	if (is_DC2114x) {
+	    device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
+		      ? DC21142 : DC21143);
+	}
+	lp->chipset = device;
+
+	/* Get the board I/O address (64 bits on sparc64) */
+	iobase = pci_resource_start(this_dev, 0);
+
+	/* Fetch the IRQ to be used */
+	irq = this_dev->irq;
+	if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue;
+
+	/* Check if I/O accesses are enabled */
+	pci_read_config_word(this_dev, PCI_COMMAND, &status);
+	if (!(status & PCI_COMMAND_IO)) continue;
+
+	/* Search for a valid SROM attached to this DECchip */
+	DevicePresent(dev, DE4X5_APROM);
+	for (j=0, i=0; i<ETH_ALEN; i++) {
+	    j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i);
+	}
+	if (j != 0 && j != 6 * 0xff) {
+	    last.chipset = device;
+	    last.bus = pb;
+	    last.irq = irq;
+	    for (i=0; i<ETH_ALEN; i++) {
+		last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i);
+	    }
+	    return;
+	}
+    }
+}
+
+/*
+** PCI bus I/O device probe
+** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not
+** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be
+** enabled by the user first in the set up utility. Hence we just check for
+** enabled features and silently ignore the card if they're not.
+**
+** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering
+** bit. Here, check for I/O accesses and then set BM. If you put the card in
+** a non BM slot, you're on your own (and complain to the PC vendor that your
+** PC doesn't conform to the PCI standard)!
+**
+** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x
+** kernels use the V0.535[n] drivers.
+*/
+
+static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	u_char pb, pbus = 0, dev_num, dnum = 0, timer;
+	u_short vendor, status;
+	u_int irq = 0, device;
+	u_long iobase = 0;	/* Clear upper 32 bits in Alphas */
+	int error;
+	struct net_device *dev;
+	struct de4x5_private *lp;
+
+	dev_num = PCI_SLOT(pdev->devfn);
+	pb = pdev->bus->number;
+
+	if (io) { /* probe a single PCI device */
+		pbus = (u_short)(io >> 8);
+		dnum = (u_short)(io & 0xff);
+		if ((pbus != pb) || (dnum != dev_num))
+			return -ENODEV;
+	}
+
+	vendor = pdev->vendor;
+	device = pdev->device << 8;
+	if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x))
+		return -ENODEV;
+
+	/* Ok, the device seems to be for us. */
+	if ((error = pci_enable_device (pdev)))
+		return error;
+
+	if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) {
+		error = -ENOMEM;
+		goto disable_dev;
+	}
+
+	lp = netdev_priv(dev);
+	lp->bus = PCI;
+	lp->bus_num = 0;
+
+	/* Search for an SROM on this bus */
+	if (lp->bus_num != pb) {
+	    lp->bus_num = pb;
+	    srom_search(dev, pdev);
+	}
+
+	/* Get the chip configuration revision register */
+	lp->cfrv = pdev->revision;
+
+	/* Set the device number information */
+	lp->device = dev_num;
+	lp->bus_num = pb;
+
+	/* Set the chipset information */
+	if (is_DC2114x) {
+	    device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+	}
+	lp->chipset = device;
+
+	/* Get the board I/O address (64 bits on sparc64) */
+	iobase = pci_resource_start(pdev, 0);
+
+	/* Fetch the IRQ to be used */
+	irq = pdev->irq;
+	if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) {
+		error = -ENODEV;
+		goto free_dev;
+	}
+
+	/* Check if I/O accesses and Bus Mastering are enabled */
+	pci_read_config_word(pdev, PCI_COMMAND, &status);
+#ifdef __powerpc__
+	if (!(status & PCI_COMMAND_IO)) {
+	    status |= PCI_COMMAND_IO;
+	    pci_write_config_word(pdev, PCI_COMMAND, status);
+	    pci_read_config_word(pdev, PCI_COMMAND, &status);
+	}
+#endif /* __powerpc__ */
+	if (!(status & PCI_COMMAND_IO)) {
+		error = -ENODEV;
+		goto free_dev;
+	}
+
+	if (!(status & PCI_COMMAND_MASTER)) {
+	    status |= PCI_COMMAND_MASTER;
+	    pci_write_config_word(pdev, PCI_COMMAND, status);
+	    pci_read_config_word(pdev, PCI_COMMAND, &status);
+	}
+	if (!(status & PCI_COMMAND_MASTER)) {
+		error = -ENODEV;
+		goto free_dev;
+	}
+
+	/* Check the latency timer for values >= 0x60 */
+	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer);
+	if (timer < 0x60) {
+	    pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60);
+	}
+
+	DevicePresent(dev, DE4X5_APROM);
+
+	if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) {
+		error = -EBUSY;
+		goto free_dev;
+	}
+
+	dev->irq = irq;
+
+	if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) {
+		goto release;
+	}
+
+	return 0;
+
+ release:
+	release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
+ free_dev:
+	free_netdev (dev);
+ disable_dev:
+	pci_disable_device (pdev);
+	return error;
+}
+
+static void __devexit de4x5_pci_remove (struct pci_dev *pdev)
+{
+	struct net_device *dev;
+	u_long iobase;
+
+	dev = dev_get_drvdata(&pdev->dev);
+	iobase = dev->base_addr;
+
+	unregister_netdev (dev);
+	free_netdev (dev);
+	release_region (iobase, DE4X5_PCI_TOTAL_SIZE);
+	pci_disable_device (pdev);
+}
+
+static struct pci_device_id de4x5_pci_tbl[] = {
+        { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+        { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS,
+          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+        { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+        { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+        { },
+};
+
+static struct pci_driver de4x5_pci_driver = {
+        .name           = "de4x5",
+        .id_table       = de4x5_pci_tbl,
+        .probe          = de4x5_pci_probe,
+	.remove         = __devexit_p (de4x5_pci_remove),
+};
+
+#endif
+
+/*
+** Auto configure the media here rather than setting the port at compile
+** time. This routine is called by de4x5_init() and when a loss of media is
+** detected (excessive collisions, loss of carrier, no carrier or link fail
+** [TP] or no recent receive activity) to check whether the user has been
+** sneaky and changed the port on us.
+*/
+static int
+autoconf_media(struct net_device *dev)
+{
+	struct de4x5_private *lp = netdev_priv(dev);
+	u_long iobase = dev->base_addr;
+
+	disable_ast(dev);
+
+	lp->c_media = AUTO;                     /* Bogus last media */
+	inl(DE4X5_MFC);                         /* Zero the lost frames counter */
+	lp->media = INIT;
+	lp->tcount = 0;
+
+	de4x5_ast(dev);
+
+	return lp->media;
+}
+
+/*
+** Autoconfigure the media when using the DC21040. AUI cannot be distinguished
+** from BNC as the port has a jumper to set thick or thin wire. When set for
+** BNC, the BNC port will indicate activity if it's not terminated correctly.
+** The only way to test for that is to place a loopback packet onto the
+** network and watch for errors. Since we're messing with the interrupt mask
+** register, disable the board interrupts and do not allow any more packets to
+** be queued to the hardware. Re-enable everything only when the media is
+** found.
+** I may have to "age out" locally queued packets so that the higher layer
+** timeouts don't effectively duplicate packets on the network.
+*/
+static int
+dc21040_autoconf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+    s32 imr;
+
+    switch (lp->media) {
+    case INIT:
+	DISABLE_IRQs;
+	lp->tx_enable = false;
+	lp->timeout = -1;
+	de4x5_save_skbs(dev);
+	if ((lp->autosense == AUTO) || (lp->autosense == TP)) {
+	    lp->media = TP;
+	} else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) {
+	    lp->media = BNC_AUI;
+	} else if (lp->autosense == EXT_SIA) {
+	    lp->media = EXT_SIA;
+	} else {
+	    lp->media = NC;
+	}
+	lp->local_state = 0;
+	next_tick = dc21040_autoconf(dev);
+	break;
+
+    case TP:
+	next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI,
+		                                         TP_SUSPECT, test_tp);
+	break;
+
+    case TP_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf);
+	break;
+
+    case BNC:
+    case AUI:
+    case BNC_AUI:
+	next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA,
+		                                  BNC_AUI_SUSPECT, ping_media);
+	break;
+
+    case BNC_AUI_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf);
+	break;
+
+    case EXT_SIA:
+	next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000,
+		                              NC, EXT_SIA_SUSPECT, ping_media);
+	break;
+
+    case EXT_SIA_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf);
+	break;
+
+    case NC:
+	/* default to TP for all */
+	reset_init_sia(dev, 0x8f01, 0xffff, 0x0000);
+	if (lp->media != lp->c_media) {
+	    de4x5_dbg_media(dev);
+	    lp->c_media = lp->media;
+	}
+	lp->media = INIT;
+	lp->tx_enable = false;
+	break;
+    }
+
+    return next_tick;
+}
+
+static int
+dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout,
+	      int next_state, int suspect_state,
+	      int (*fn)(struct net_device *, int))
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int next_tick = DE4X5_AUTOSENSE_MS;
+    int linkBad;
+
+    switch (lp->local_state) {
+    case 0:
+	reset_init_sia(dev, csr13, csr14, csr15);
+	lp->local_state++;
+	next_tick = 500;
+	break;
+
+    case 1:
+	if (!lp->tx_enable) {
+	    linkBad = fn(dev, timeout);
+	    if (linkBad < 0) {
+		next_tick = linkBad & ~TIMER_CB;
+	    } else {
+		if (linkBad && (lp->autosense == AUTO)) {
+		    lp->local_state = 0;
+		    lp->media = next_state;
+		} else {
+		    de4x5_init_connection(dev);
+		}
+	    }
+	} else if (!lp->linkOK && (lp->autosense == AUTO)) {
+	    lp->media = suspect_state;
+	    next_tick = 3000;
+	}
+	break;
+    }
+
+    return next_tick;
+}
+
+static int
+de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state,
+		      int (*fn)(struct net_device *, int),
+		      int (*asfn)(struct net_device *))
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int next_tick = DE4X5_AUTOSENSE_MS;
+    int linkBad;
+
+    switch (lp->local_state) {
+    case 1:
+	if (lp->linkOK) {
+	    lp->media = prev_state;
+	} else {
+	    lp->local_state++;
+	    next_tick = asfn(dev);
+	}
+	break;
+
+    case 2:
+	linkBad = fn(dev, timeout);
+	if (linkBad < 0) {
+	    next_tick = linkBad & ~TIMER_CB;
+	} else if (!linkBad) {
+	    lp->local_state--;
+	    lp->media = prev_state;
+	} else {
+	    lp->media = INIT;
+	    lp->tcount++;
+	}
+    }
+
+    return next_tick;
+}
+
+/*
+** Autoconfigure the media when using the DC21041. AUI needs to be tested
+** before BNC, because the BNC port will indicate activity if it's not
+** terminated correctly. The only way to test for that is to place a loopback
+** packet onto the network and watch for errors. Since we're messing with
+** the interrupt mask register, disable the board interrupts and do not allow
+** any more packets to be queued to the hardware. Re-enable everything only
+** when the media is found.
+*/
+static int
+dc21041_autoconf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 sts, irqs, irq_mask, imr, omr;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+
+    switch (lp->media) {
+    case INIT:
+	DISABLE_IRQs;
+	lp->tx_enable = false;
+	lp->timeout = -1;
+	de4x5_save_skbs(dev);          /* Save non transmitted skb's */
+	if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) {
+	    lp->media = TP;            /* On chip auto negotiation is broken */
+	} else if (lp->autosense == TP) {
+	    lp->media = TP;
+	} else if (lp->autosense == BNC) {
+	    lp->media = BNC;
+	} else if (lp->autosense == AUI) {
+	    lp->media = AUI;
+	} else {
+	    lp->media = NC;
+	}
+	lp->local_state = 0;
+	next_tick = dc21041_autoconf(dev);
+	break;
+
+    case TP_NW:
+	if (lp->timeout < 0) {
+	    omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */
+	    outl(omr | OMR_FDX, DE4X5_OMR);
+	}
+	irqs = STS_LNF | STS_LNP;
+	irq_mask = IMR_LFM | IMR_LPM;
+	sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400);
+	if (sts < 0) {
+	    next_tick = sts & ~TIMER_CB;
+	} else {
+	    if (sts & STS_LNP) {
+		lp->media = ANS;
+	    } else {
+		lp->media = AUI;
+	    }
+	    next_tick = dc21041_autoconf(dev);
+	}
+	break;
+
+    case ANS:
+	if (!lp->tx_enable) {
+	    irqs = STS_LNP;
+	    irq_mask = IMR_LPM;
+	    sts = test_ans(dev, irqs, irq_mask, 3000);
+	    if (sts < 0) {
+		next_tick = sts & ~TIMER_CB;
+	    } else {
+		if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
+		    lp->media = TP;
+		    next_tick = dc21041_autoconf(dev);
+		} else {
+		    lp->local_state = 1;
+		    de4x5_init_connection(dev);
+		}
+	    }
+	} else if (!lp->linkOK && (lp->autosense == AUTO)) {
+	    lp->media = ANS_SUSPECT;
+	    next_tick = 3000;
+	}
+	break;
+
+    case ANS_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf);
+	break;
+
+    case TP:
+	if (!lp->tx_enable) {
+	    if (lp->timeout < 0) {
+		omr = inl(DE4X5_OMR);          /* Set up half duplex for TP */
+		outl(omr & ~OMR_FDX, DE4X5_OMR);
+	    }
+	    irqs = STS_LNF | STS_LNP;
+	    irq_mask = IMR_LFM | IMR_LPM;
+	    sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400);
+	    if (sts < 0) {
+		next_tick = sts & ~TIMER_CB;
+	    } else {
+		if (!(sts & STS_LNP) && (lp->autosense == AUTO)) {
+		    if (inl(DE4X5_SISR) & SISR_NRA) {
+			lp->media = AUI;       /* Non selected port activity */
+		    } else {
+			lp->media = BNC;
+		    }
+		    next_tick = dc21041_autoconf(dev);
+		} else {
+		    lp->local_state = 1;
+		    de4x5_init_connection(dev);
+		}
+	    }
+	} else if (!lp->linkOK && (lp->autosense == AUTO)) {
+	    lp->media = TP_SUSPECT;
+	    next_tick = 3000;
+	}
+	break;
+
+    case TP_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf);
+	break;
+
+    case AUI:
+	if (!lp->tx_enable) {
+	    if (lp->timeout < 0) {
+		omr = inl(DE4X5_OMR);          /* Set up half duplex for AUI */
+		outl(omr & ~OMR_FDX, DE4X5_OMR);
+	    }
+	    irqs = 0;
+	    irq_mask = 0;
+	    sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000);
+	    if (sts < 0) {
+		next_tick = sts & ~TIMER_CB;
+	    } else {
+		if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
+		    lp->media = BNC;
+		    next_tick = dc21041_autoconf(dev);
+		} else {
+		    lp->local_state = 1;
+		    de4x5_init_connection(dev);
+		}
+	    }
+	} else if (!lp->linkOK && (lp->autosense == AUTO)) {
+	    lp->media = AUI_SUSPECT;
+	    next_tick = 3000;
+	}
+	break;
+
+    case AUI_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf);
+	break;
+
+    case BNC:
+	switch (lp->local_state) {
+	case 0:
+	    if (lp->timeout < 0) {
+		omr = inl(DE4X5_OMR);          /* Set up half duplex for BNC */
+		outl(omr & ~OMR_FDX, DE4X5_OMR);
+	    }
+	    irqs = 0;
+	    irq_mask = 0;
+	    sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000);
+	    if (sts < 0) {
+		next_tick = sts & ~TIMER_CB;
+	    } else {
+		lp->local_state++;             /* Ensure media connected */
+		next_tick = dc21041_autoconf(dev);
+	    }
+	    break;
+
+	case 1:
+	    if (!lp->tx_enable) {
+		if ((sts = ping_media(dev, 3000)) < 0) {
+		    next_tick = sts & ~TIMER_CB;
+		} else {
+		    if (sts) {
+			lp->local_state = 0;
+			lp->media = NC;
+		    } else {
+			de4x5_init_connection(dev);
+		    }
+		}
+	    } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+		lp->media = BNC_SUSPECT;
+		next_tick = 3000;
+	    }
+	    break;
+	}
+	break;
+
+    case BNC_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf);
+	break;
+
+    case NC:
+	omr = inl(DE4X5_OMR);    /* Set up full duplex for the autonegotiate */
+	outl(omr | OMR_FDX, DE4X5_OMR);
+	reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */
+	if (lp->media != lp->c_media) {
+	    de4x5_dbg_media(dev);
+	    lp->c_media = lp->media;
+	}
+	lp->media = INIT;
+	lp->tx_enable = false;
+	break;
+    }
+
+    return next_tick;
+}
+
+/*
+** Some autonegotiation chips are broken in that they do not return the
+** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement
+** register, except at the first power up negotiation.
+*/
+static int
+dc21140m_autoconf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int ana, anlpa, cap, cr, slnk, sr;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+    u_long imr, omr, iobase = dev->base_addr;
+
+    switch(lp->media) {
+    case INIT:
+        if (lp->timeout < 0) {
+	    DISABLE_IRQs;
+	    lp->tx_enable = false;
+	    lp->linkOK = 0;
+	    de4x5_save_skbs(dev);          /* Save non transmitted skb's */
+	}
+	if ((next_tick = de4x5_reset_phy(dev)) < 0) {
+	    next_tick &= ~TIMER_CB;
+	} else {
+	    if (lp->useSROM) {
+		if (srom_map_media(dev) < 0) {
+		    lp->tcount++;
+		    return next_tick;
+		}
+		srom_exec(dev, lp->phy[lp->active].gep);
+		if (lp->infoblock_media == ANS) {
+		    ana = lp->phy[lp->active].ana | MII_ANA_CSMA;
+		    mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+		}
+	    } else {
+		lp->tmp = MII_SR_ASSC;     /* Fake out the MII speed set */
+		SET_10Mb;
+		if (lp->autosense == _100Mb) {
+		    lp->media = _100Mb;
+		} else if (lp->autosense == _10Mb) {
+		    lp->media = _10Mb;
+		} else if ((lp->autosense == AUTO) &&
+			            ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
+		    ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
+		    ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
+		    mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+		    lp->media = ANS;
+		} else if (lp->autosense == AUTO) {
+		    lp->media = SPD_DET;
+		} else if (is_spd_100(dev) && is_100_up(dev)) {
+		    lp->media = _100Mb;
+		} else {
+		    lp->media = NC;
+		}
+	    }
+	    lp->local_state = 0;
+	    next_tick = dc21140m_autoconf(dev);
+	}
+	break;
+
+    case ANS:
+	switch (lp->local_state) {
+	case 0:
+	    if (lp->timeout < 0) {
+		mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
+	    }
+	    cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
+	    if (cr < 0) {
+		next_tick = cr & ~TIMER_CB;
+	    } else {
+		if (cr) {
+		    lp->local_state = 0;
+		    lp->media = SPD_DET;
+		} else {
+		    lp->local_state++;
+		}
+		next_tick = dc21140m_autoconf(dev);
+	    }
+	    break;
+
+	case 1:
+	    if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) {
+		next_tick = sr & ~TIMER_CB;
+	    } else {
+		lp->media = SPD_DET;
+		lp->local_state = 0;
+		if (sr) {                         /* Success! */
+		    lp->tmp = MII_SR_ASSC;
+		    anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
+		    ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+		    if (!(anlpa & MII_ANLPA_RF) &&
+			 (cap = anlpa & MII_ANLPA_TAF & ana)) {
+			if (cap & MII_ANA_100M) {
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
+			    lp->media = _100Mb;
+			} else if (cap & MII_ANA_10M) {
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
+
+			    lp->media = _10Mb;
+			}
+		    }
+		}                       /* Auto Negotiation failed to finish */
+		next_tick = dc21140m_autoconf(dev);
+	    }                           /* Auto Negotiation failed to start */
+	    break;
+	}
+	break;
+
+    case SPD_DET:                              /* Choose 10Mb/s or 100Mb/s */
+        if (lp->timeout < 0) {
+	    lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS :
+		                                  (~gep_rd(dev) & GEP_LNP));
+	    SET_100Mb_PDET;
+	}
+        if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
+	    next_tick = slnk & ~TIMER_CB;
+	} else {
+	    if (is_spd_100(dev) && is_100_up(dev)) {
+		lp->media = _100Mb;
+	    } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) {
+		lp->media = _10Mb;
+	    } else {
+		lp->media = NC;
+	    }
+	    next_tick = dc21140m_autoconf(dev);
+	}
+	break;
+
+    case _100Mb:                               /* Set 100Mb/s */
+        next_tick = 3000;
+	if (!lp->tx_enable) {
+	    SET_100Mb;
+	    de4x5_init_connection(dev);
+	} else {
+	    if (!lp->linkOK && (lp->autosense == AUTO)) {
+		if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
+		    lp->media = INIT;
+		    lp->tcount++;
+		    next_tick = DE4X5_AUTOSENSE_MS;
+		}
+	    }
+	}
+	break;
+
+    case BNC:
+    case AUI:
+    case _10Mb:                                /* Set 10Mb/s */
+        next_tick = 3000;
+	if (!lp->tx_enable) {
+	    SET_10Mb;
+	    de4x5_init_connection(dev);
+	} else {
+	    if (!lp->linkOK && (lp->autosense == AUTO)) {
+		if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
+		    lp->media = INIT;
+		    lp->tcount++;
+		    next_tick = DE4X5_AUTOSENSE_MS;
+		}
+	    }
+	}
+	break;
+
+    case NC:
+        if (lp->media != lp->c_media) {
+	    de4x5_dbg_media(dev);
+	    lp->c_media = lp->media;
+	}
+	lp->media = INIT;
+	lp->tx_enable = false;
+	break;
+    }
+
+    return next_tick;
+}
+
+/*
+** This routine may be merged into dc21140m_autoconf() sometime as I'm
+** changing how I figure out the media - but trying to keep it backwards
+** compatible with the de500-xa and de500-aa.
+** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock
+** functions and set during de4x5_mac_port() and/or de4x5_reset_phy().
+** This routine just has to figure out whether 10Mb/s or 100Mb/s is
+** active.
+** When autonegotiation is working, the ANS part searches the SROM for
+** the highest common speed (TP) link that both can run and if that can
+** be full duplex. That infoblock is executed and then the link speed set.
+**
+** Only _10Mb and _100Mb are tested here.
+*/
+static int
+dc2114x_autoconf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+
+    switch (lp->media) {
+    case INIT:
+        if (lp->timeout < 0) {
+	    DISABLE_IRQs;
+	    lp->tx_enable = false;
+	    lp->linkOK = 0;
+            lp->timeout = -1;
+	    de4x5_save_skbs(dev);            /* Save non transmitted skb's */
+	    if (lp->params.autosense & ~AUTO) {
+		srom_map_media(dev);         /* Fixed media requested      */
+		if (lp->media != lp->params.autosense) {
+		    lp->tcount++;
+		    lp->media = INIT;
+		    return next_tick;
+		}
+		lp->media = INIT;
+	    }
+	}
+	if ((next_tick = de4x5_reset_phy(dev)) < 0) {
+	    next_tick &= ~TIMER_CB;
+	} else {
+	    if (lp->autosense == _100Mb) {
+		lp->media = _100Mb;
+	    } else if (lp->autosense == _10Mb) {
+		lp->media = _10Mb;
+	    } else if (lp->autosense == TP) {
+		lp->media = TP;
+	    } else if (lp->autosense == BNC) {
+		lp->media = BNC;
+	    } else if (lp->autosense == AUI) {
+		lp->media = AUI;
+	    } else {
+		lp->media = SPD_DET;
+		if ((lp->infoblock_media == ANS) &&
+		                    ((sr=is_anc_capable(dev)) & MII_SR_ANC)) {
+		    ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA);
+		    ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM);
+		    mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+		    lp->media = ANS;
+		}
+	    }
+	    lp->local_state = 0;
+	    next_tick = dc2114x_autoconf(dev);
+        }
+	break;
+
+    case ANS:
+	switch (lp->local_state) {
+	case 0:
+	    if (lp->timeout < 0) {
+		mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
+	    }
+	    cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
+	    if (cr < 0) {
+		next_tick = cr & ~TIMER_CB;
+	    } else {
+		if (cr) {
+		    lp->local_state = 0;
+		    lp->media = SPD_DET;
+		} else {
+		    lp->local_state++;
+		}
+		next_tick = dc2114x_autoconf(dev);
+	    }
+	    break;
+
+	case 1:
+	    sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000);
+	    if (sr < 0) {
+		next_tick = sr & ~TIMER_CB;
+	    } else {
+		lp->media = SPD_DET;
+		lp->local_state = 0;
+		if (sr) {                         /* Success! */
+		    lp->tmp = MII_SR_ASSC;
+		    anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII);
+		    ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII);
+		    if (!(anlpa & MII_ANLPA_RF) &&
+			 (cap = anlpa & MII_ANLPA_TAF & ana)) {
+			if (cap & MII_ANA_100M) {
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
+			    lp->media = _100Mb;
+			} else if (cap & MII_ANA_10M) {
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
+			    lp->media = _10Mb;
+			}
+		    }
+		}                       /* Auto Negotiation failed to finish */
+		next_tick = dc2114x_autoconf(dev);
+	    }                           /* Auto Negotiation failed to start  */
+	    break;
+	}
+	break;
+
+    case AUI:
+	if (!lp->tx_enable) {
+	    if (lp->timeout < 0) {
+		omr = inl(DE4X5_OMR);   /* Set up half duplex for AUI        */
+		outl(omr & ~OMR_FDX, DE4X5_OMR);
+	    }
+	    irqs = 0;
+	    irq_mask = 0;
+	    sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
+	    if (sts < 0) {
+		next_tick = sts & ~TIMER_CB;
+	    } else {
+		if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) {
+		    lp->media = BNC;
+		    next_tick = dc2114x_autoconf(dev);
+		} else {
+		    lp->local_state = 1;
+		    de4x5_init_connection(dev);
+		}
+	    }
+	} else if (!lp->linkOK && (lp->autosense == AUTO)) {
+	    lp->media = AUI_SUSPECT;
+	    next_tick = 3000;
+	}
+	break;
+
+    case AUI_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf);
+	break;
+
+    case BNC:
+	switch (lp->local_state) {
+	case 0:
+	    if (lp->timeout < 0) {
+		omr = inl(DE4X5_OMR);          /* Set up half duplex for BNC */
+		outl(omr & ~OMR_FDX, DE4X5_OMR);
+	    }
+	    irqs = 0;
+	    irq_mask = 0;
+	    sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000);
+	    if (sts < 0) {
+		next_tick = sts & ~TIMER_CB;
+	    } else {
+		lp->local_state++;             /* Ensure media connected */
+		next_tick = dc2114x_autoconf(dev);
+	    }
+	    break;
+
+	case 1:
+	    if (!lp->tx_enable) {
+		if ((sts = ping_media(dev, 3000)) < 0) {
+		    next_tick = sts & ~TIMER_CB;
+		} else {
+		    if (sts) {
+			lp->local_state = 0;
+			lp->tcount++;
+			lp->media = INIT;
+		    } else {
+			de4x5_init_connection(dev);
+		    }
+		}
+	    } else if (!lp->linkOK && (lp->autosense == AUTO)) {
+		lp->media = BNC_SUSPECT;
+		next_tick = 3000;
+	    }
+	    break;
+	}
+	break;
+
+    case BNC_SUSPECT:
+	next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf);
+	break;
+
+    case SPD_DET:                              /* Choose 10Mb/s or 100Mb/s */
+	  if (srom_map_media(dev) < 0) {
+	      lp->tcount++;
+	      lp->media = INIT;
+	      return next_tick;
+	  }
+	  if (lp->media == _100Mb) {
+	      if ((slnk = test_for_100Mb(dev, 6500)) < 0) {
+		  lp->media = SPD_DET;
+		  return slnk & ~TIMER_CB;
+	      }
+	  } else {
+	      if (wait_for_link(dev) < 0) {
+		  lp->media = SPD_DET;
+		  return PDET_LINK_WAIT;
+	      }
+	  }
+	  if (lp->media == ANS) {           /* Do MII parallel detection */
+	      if (is_spd_100(dev)) {
+		  lp->media = _100Mb;
+	      } else {
+		  lp->media = _10Mb;
+	      }
+	      next_tick = dc2114x_autoconf(dev);
+	  } else if (((lp->media == _100Mb) && is_100_up(dev)) ||
+		     (((lp->media == _10Mb) || (lp->media == TP) ||
+		       (lp->media == BNC)   || (lp->media == AUI)) &&
+		      is_10_up(dev))) {
+	      next_tick = dc2114x_autoconf(dev);
+	  } else {
+	      lp->tcount++;
+	      lp->media = INIT;
+	  }
+	  break;
+
+    case _10Mb:
+        next_tick = 3000;
+	if (!lp->tx_enable) {
+	    SET_10Mb;
+	    de4x5_init_connection(dev);
+	} else {
+	    if (!lp->linkOK && (lp->autosense == AUTO)) {
+		if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) {
+		    lp->media = INIT;
+		    lp->tcount++;
+		    next_tick = DE4X5_AUTOSENSE_MS;
+		}
+	    }
+	}
+	break;
+
+    case _100Mb:
+        next_tick = 3000;
+	if (!lp->tx_enable) {
+	    SET_100Mb;
+	    de4x5_init_connection(dev);
+	} else {
+	    if (!lp->linkOK && (lp->autosense == AUTO)) {
+		if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) {
+		    lp->media = INIT;
+		    lp->tcount++;
+		    next_tick = DE4X5_AUTOSENSE_MS;
+		}
+	    }
+	}
+	break;
+
+    default:
+	lp->tcount++;
+printk("Huh?: media:%02x\n", lp->media);
+	lp->media = INIT;
+	break;
+    }
+
+    return next_tick;
+}
+
+static int
+srom_autoconf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    return lp->infoleaf_fn(dev);
+}
+
+/*
+** This mapping keeps the original media codes and FDX flag unchanged.
+** While it isn't strictly necessary, it helps me for the moment...
+** The early return avoids a media state / SROM media space clash.
+*/
+static int
+srom_map_media(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    lp->fdx = false;
+    if (lp->infoblock_media == lp->media)
+      return 0;
+
+    switch(lp->infoblock_media) {
+      case SROM_10BASETF:
+	if (!lp->params.fdx) return -1;
+	lp->fdx = true;
+      case SROM_10BASET:
+	if (lp->params.fdx && !lp->fdx) return -1;
+	if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) {
+	    lp->media = _10Mb;
+	} else {
+	    lp->media = TP;
+	}
+	break;
+
+      case SROM_10BASE2:
+	lp->media = BNC;
+	break;
+
+      case SROM_10BASE5:
+	lp->media = AUI;
+	break;
+
+      case SROM_100BASETF:
+        if (!lp->params.fdx) return -1;
+	lp->fdx = true;
+      case SROM_100BASET:
+	if (lp->params.fdx && !lp->fdx) return -1;
+	lp->media = _100Mb;
+	break;
+
+      case SROM_100BASET4:
+	lp->media = _100Mb;
+	break;
+
+      case SROM_100BASEFF:
+	if (!lp->params.fdx) return -1;
+	lp->fdx = true;
+      case SROM_100BASEF:
+	if (lp->params.fdx && !lp->fdx) return -1;
+	lp->media = _100Mb;
+	break;
+
+      case ANS:
+	lp->media = ANS;
+	lp->fdx = lp->params.fdx;
+	break;
+
+      default:
+	printk("%s: Bad media code [%d] detected in SROM!\n", dev->name,
+	                                                  lp->infoblock_media);
+	return -1;
+	break;
+    }
+
+    return 0;
+}
+
+static void
+de4x5_init_connection(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    u_long flags = 0;
+
+    if (lp->media != lp->c_media) {
+        de4x5_dbg_media(dev);
+	lp->c_media = lp->media;          /* Stop scrolling media messages */
+    }
+
+    spin_lock_irqsave(&lp->lock, flags);
+    de4x5_rst_desc_ring(dev);
+    de4x5_setup_intr(dev);
+    lp->tx_enable = true;
+    spin_unlock_irqrestore(&lp->lock, flags);
+    outl(POLL_DEMAND, DE4X5_TPD);
+
+    netif_wake_queue(dev);
+}
+
+/*
+** General PHY reset function. Some MII devices don't reset correctly
+** since their MII address pins can float at voltages that are dependent
+** on the signal pin use. Do a double reset to ensure a reset.
+*/
+static int
+de4x5_reset_phy(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int next_tick = 0;
+
+    if ((lp->useSROM) || (lp->phy[lp->active].id)) {
+	if (lp->timeout < 0) {
+	    if (lp->useSROM) {
+		if (lp->phy[lp->active].rst) {
+		    srom_exec(dev, lp->phy[lp->active].rst);
+		    srom_exec(dev, lp->phy[lp->active].rst);
+		} else if (lp->rst) {          /* Type 5 infoblock reset */
+		    srom_exec(dev, lp->rst);
+		    srom_exec(dev, lp->rst);
+		}
+	    } else {
+		PHY_HARD_RESET;
+	    }
+	    if (lp->useMII) {
+	        mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
+            }
+        }
+	if (lp->useMII) {
+	    next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500);
+	}
+    } else if (lp->chipset == DC21140) {
+	PHY_HARD_RESET;
+    }
+
+    return next_tick;
+}
+
+static int
+test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 sts, csr12;
+
+    if (lp->timeout < 0) {
+	lp->timeout = msec/100;
+	if (!lp->useSROM) {      /* Already done if by SROM, else dc2104[01] */
+	    reset_init_sia(dev, csr13, csr14, csr15);
+	}
+
+	/* set up the interrupt mask */
+	outl(irq_mask, DE4X5_IMR);
+
+	/* clear all pending interrupts */
+	sts = inl(DE4X5_STS);
+	outl(sts, DE4X5_STS);
+
+	/* clear csr12 NRA and SRA bits */
+	if ((lp->chipset == DC21041) || lp->useSROM) {
+	    csr12 = inl(DE4X5_SISR);
+	    outl(csr12, DE4X5_SISR);
+	}
+    }
+
+    sts = inl(DE4X5_STS) & ~TIMER_CB;
+
+    if (!(sts & irqs) && --lp->timeout) {
+	sts = 100 | TIMER_CB;
+    } else {
+	lp->timeout = -1;
+    }
+
+    return sts;
+}
+
+static int
+test_tp(struct net_device *dev, s32 msec)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int sisr;
+
+    if (lp->timeout < 0) {
+	lp->timeout = msec/100;
+    }
+
+    sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR);
+
+    if (sisr && --lp->timeout) {
+	sisr = 100 | TIMER_CB;
+    } else {
+	lp->timeout = -1;
+    }
+
+    return sisr;
+}
+
+/*
+** Samples the 100Mb Link State Signal. The sample interval is important
+** because too fast a rate can give erroneous results and confuse the
+** speed sense algorithm.
+*/
+#define SAMPLE_INTERVAL 500  /* ms */
+#define SAMPLE_DELAY    2000 /* ms */
+static int
+test_for_100Mb(struct net_device *dev, int msec)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK);
+
+    if (lp->timeout < 0) {
+	if ((msec/SAMPLE_INTERVAL) <= 0) return 0;
+	if (msec > SAMPLE_DELAY) {
+	    lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL;
+	    gep = SAMPLE_DELAY | TIMER_CB;
+	    return gep;
+	} else {
+	    lp->timeout = msec/SAMPLE_INTERVAL;
+	}
+    }
+
+    if (lp->phy[lp->active].id || lp->useSROM) {
+	gep = is_100_up(dev) | is_spd_100(dev);
+    } else {
+	gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP));
+    }
+    if (!(gep & ret) && --lp->timeout) {
+	gep = SAMPLE_INTERVAL | TIMER_CB;
+    } else {
+	lp->timeout = -1;
+    }
+
+    return gep;
+}
+
+static int
+wait_for_link(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    if (lp->timeout < 0) {
+	lp->timeout = 1;
+    }
+
+    if (lp->timeout--) {
+	return TIMER_CB;
+    } else {
+	lp->timeout = -1;
+    }
+
+    return 0;
+}
+
+/*
+**
+**
+*/
+static int
+test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int test;
+    u_long iobase = dev->base_addr;
+
+    if (lp->timeout < 0) {
+	lp->timeout = msec/100;
+    }
+
+    reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
+    test = (reg ^ (pol ? ~0 : 0)) & mask;
+
+    if (test && --lp->timeout) {
+	reg = 100 | TIMER_CB;
+    } else {
+	lp->timeout = -1;
+    }
+
+    return reg;
+}
+
+static int
+is_spd_100(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int spd;
+
+    if (lp->useMII) {
+	spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII);
+	spd = ~(spd ^ lp->phy[lp->active].spd.value);
+	spd &= lp->phy[lp->active].spd.mask;
+    } else if (!lp->useSROM) {                      /* de500-xa */
+	spd = ((~gep_rd(dev)) & GEP_SLNK);
+    } else {
+	if ((lp->ibn == 2) || !lp->asBitValid)
+	    return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0;
+
+	spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) |
+	          (lp->linkOK & ~lp->asBitValid);
+    }
+
+    return spd;
+}
+
+static int
+is_100_up(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if (lp->useMII) {
+	/* Double read for sticky bits & temporary drops */
+	mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
+	return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS;
+    } else if (!lp->useSROM) {                       /* de500-xa */
+	return (~gep_rd(dev)) & GEP_SLNK;
+    } else {
+	if ((lp->ibn == 2) || !lp->asBitValid)
+	    return (lp->chipset == DC21143) ? (~inl(DE4X5_SISR)&SISR_LS100) : 0;
+
+        return (lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
+		(lp->linkOK & ~lp->asBitValid);
+    }
+}
+
+static int
+is_10_up(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if (lp->useMII) {
+	/* Double read for sticky bits & temporary drops */
+	mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
+	return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS;
+    } else if (!lp->useSROM) {                       /* de500-xa */
+	return (~gep_rd(dev)) & GEP_LNP;
+    } else {
+	if ((lp->ibn == 2) || !lp->asBitValid)
+	    return ((lp->chipset & ~0x00ff) == DC2114x) ?
+		    (~inl(DE4X5_SISR)&SISR_LS10):
+		    0;
+
+	return	(lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) |
+		(lp->linkOK & ~lp->asBitValid);
+    }
+}
+
+static int
+is_anc_capable(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
+	return mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);
+    } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+	return (inl(DE4X5_SISR) & SISR_LPN) >> 12;
+    } else {
+	return 0;
+    }
+}
+
+/*
+** Send a packet onto the media and watch for send errors that indicate the
+** media is bad or unconnected.
+*/
+static int
+ping_media(struct net_device *dev, int msec)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int sisr;
+
+    if (lp->timeout < 0) {
+	lp->timeout = msec/100;
+
+	lp->tmp = lp->tx_new;                /* Remember the ring position */
+	load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1);
+	lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+	outl(POLL_DEMAND, DE4X5_TPD);
+    }
+
+    sisr = inl(DE4X5_SISR);
+
+    if ((!(sisr & SISR_NCR)) &&
+	((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) &&
+	 (--lp->timeout)) {
+	sisr = 100 | TIMER_CB;
+    } else {
+	if ((!(sisr & SISR_NCR)) &&
+	    !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) &&
+	    lp->timeout) {
+	    sisr = 0;
+	} else {
+	    sisr = 1;
+	}
+	lp->timeout = -1;
+    }
+
+    return sisr;
+}
+
+/*
+** This function does 2 things: on Intels it kmalloc's another buffer to
+** replace the one about to be passed up. On Alpha's it kmallocs a buffer
+** into which the packet is copied.
+*/
+static struct sk_buff *
+de4x5_alloc_rx_buff(struct net_device *dev, int index, int len)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    struct sk_buff *p;
+
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
+    struct sk_buff *ret;
+    u_long i=0, tmp;
+
+    p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2);
+    if (!p) return NULL;
+
+    tmp = virt_to_bus(p->data);
+    i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp;
+    skb_reserve(p, i);
+    lp->rx_ring[index].buf = cpu_to_le32(tmp + i);
+
+    ret = lp->rx_skb[index];
+    lp->rx_skb[index] = p;
+
+    if ((u_long) ret > 1) {
+	skb_put(ret, len);
+    }
+
+    return ret;
+
+#else
+    if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */
+
+    p = dev_alloc_skb(len + 2);
+    if (!p) return NULL;
+
+    skb_reserve(p, 2);	                               /* Align */
+    if (index < lp->rx_old) {                          /* Wrapped buffer */
+	short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ;
+	memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen);
+	memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen);
+    } else {                                           /* Linear buffer */
+	memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len);
+    }
+
+    return p;
+#endif
+}
+
+static void
+de4x5_free_rx_buffs(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i;
+
+    for (i=0; i<lp->rxRingSize; i++) {
+	if ((u_long) lp->rx_skb[i] > 1) {
+	    dev_kfree_skb(lp->rx_skb[i]);
+	}
+	lp->rx_ring[i].status = 0;
+	lp->rx_skb[i] = (struct sk_buff *)1;    /* Dummy entry */
+    }
+}
+
+static void
+de4x5_free_tx_buffs(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i;
+
+    for (i=0; i<lp->txRingSize; i++) {
+	if (lp->tx_skb[i])
+	    de4x5_free_tx_buff(lp, i);
+	lp->tx_ring[i].status = 0;
+    }
+
+    /* Unload the locally queued packets */
+    __skb_queue_purge(&lp->cache.queue);
+}
+
+/*
+** When a user pulls a connection, the DECchip can end up in a
+** 'running - waiting for end of transmission' state. This means that we
+** have to perform a chip soft reset to ensure that we can synchronize
+** the hardware and software and make any media probes using a loopback
+** packet meaningful.
+*/
+static void
+de4x5_save_skbs(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 omr;
+
+    if (!lp->cache.save_cnt) {
+	STOP_DE4X5;
+	de4x5_tx(dev);                          /* Flush any sent skb's */
+	de4x5_free_tx_buffs(dev);
+	de4x5_cache_state(dev, DE4X5_SAVE_STATE);
+	de4x5_sw_reset(dev);
+	de4x5_cache_state(dev, DE4X5_RESTORE_STATE);
+	lp->cache.save_cnt++;
+	START_DE4X5;
+    }
+}
+
+static void
+de4x5_rst_desc_ring(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int i;
+    s32 omr;
+
+    if (lp->cache.save_cnt) {
+	STOP_DE4X5;
+	outl(lp->dma_rings, DE4X5_RRBA);
+	outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc),
+	     DE4X5_TRBA);
+
+	lp->rx_new = lp->rx_old = 0;
+	lp->tx_new = lp->tx_old = 0;
+
+	for (i = 0; i < lp->rxRingSize; i++) {
+	    lp->rx_ring[i].status = cpu_to_le32(R_OWN);
+	}
+
+	for (i = 0; i < lp->txRingSize; i++) {
+	    lp->tx_ring[i].status = cpu_to_le32(0);
+	}
+
+	barrier();
+	lp->cache.save_cnt--;
+	START_DE4X5;
+    }
+}
+
+static void
+de4x5_cache_state(struct net_device *dev, int flag)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    switch(flag) {
+      case DE4X5_SAVE_STATE:
+	lp->cache.csr0 = inl(DE4X5_BMR);
+	lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR));
+	lp->cache.csr7 = inl(DE4X5_IMR);
+	break;
+
+      case DE4X5_RESTORE_STATE:
+	outl(lp->cache.csr0, DE4X5_BMR);
+	outl(lp->cache.csr6, DE4X5_OMR);
+	outl(lp->cache.csr7, DE4X5_IMR);
+	if (lp->chipset == DC21140) {
+	    gep_wr(lp->cache.gepc, dev);
+	    gep_wr(lp->cache.gep, dev);
+	} else {
+	    reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14,
+			                                      lp->cache.csr15);
+	}
+	break;
+    }
+}
+
+static void
+de4x5_put_cache(struct net_device *dev, struct sk_buff *skb)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    __skb_queue_tail(&lp->cache.queue, skb);
+}
+
+static void
+de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    __skb_queue_head(&lp->cache.queue, skb);
+}
+
+static struct sk_buff *
+de4x5_get_cache(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    return __skb_dequeue(&lp->cache.queue);
+}
+
+/*
+** Check the Auto Negotiation State. Return OK when a link pass interrupt
+** is received and the auto-negotiation status is NWAY OK.
+*/
+static int
+test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 sts, ans;
+
+    if (lp->timeout < 0) {
+	lp->timeout = msec/100;
+	outl(irq_mask, DE4X5_IMR);
+
+	/* clear all pending interrupts */
+	sts = inl(DE4X5_STS);
+	outl(sts, DE4X5_STS);
+    }
+
+    ans = inl(DE4X5_SISR) & SISR_ANS;
+    sts = inl(DE4X5_STS) & ~TIMER_CB;
+
+    if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) {
+	sts = 100 | TIMER_CB;
+    } else {
+	lp->timeout = -1;
+    }
+
+    return sts;
+}
+
+static void
+de4x5_setup_intr(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 imr, sts;
+
+    if (inl(DE4X5_OMR) & OMR_SR) {   /* Only unmask if TX/RX is enabled */
+	imr = 0;
+	UNMASK_IRQs;
+	sts = inl(DE4X5_STS);        /* Reset any pending (stale) interrupts */
+	outl(sts, DE4X5_STS);
+	ENABLE_IRQs;
+    }
+}
+
+/*
+**
+*/
+static void
+reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    RESET_SIA;
+    if (lp->useSROM) {
+	if (lp->ibn == 3) {
+	    srom_exec(dev, lp->phy[lp->active].rst);
+	    srom_exec(dev, lp->phy[lp->active].gep);
+	    outl(1, DE4X5_SICR);
+	    return;
+	} else {
+	    csr15 = lp->cache.csr15;
+	    csr14 = lp->cache.csr14;
+	    csr13 = lp->cache.csr13;
+	    outl(csr15 | lp->cache.gepc, DE4X5_SIGR);
+	    outl(csr15 | lp->cache.gep, DE4X5_SIGR);
+	}
+    } else {
+	outl(csr15, DE4X5_SIGR);
+    }
+    outl(csr14, DE4X5_STRR);
+    outl(csr13, DE4X5_SICR);
+
+    mdelay(10);
+}
+
+/*
+** Create a loopback ethernet packet
+*/
+static void
+create_packet(struct net_device *dev, char *frame, int len)
+{
+    int i;
+    char *buf = frame;
+
+    for (i=0; i<ETH_ALEN; i++) {             /* Use this source address */
+	*buf++ = dev->dev_addr[i];
+    }
+    for (i=0; i<ETH_ALEN; i++) {             /* Use this destination address */
+	*buf++ = dev->dev_addr[i];
+    }
+
+    *buf++ = 0;                              /* Packet length (2 bytes) */
+    *buf++ = 1;
+}
+
+/*
+** Look for a particular board name in the EISA configuration space
+*/
+static int
+EISA_signature(char *name, struct device *device)
+{
+    int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
+    struct eisa_device *edev;
+
+    *name = '\0';
+    edev = to_eisa_device (device);
+    i = edev->id.driver_data;
+
+    if (i >= 0 && i < siglen) {
+	    strcpy (name, de4x5_signatures[i]);
+	    status = 1;
+    }
+
+    return status;                         /* return the device name string */
+}
+
+/*
+** Look for a particular board name in the PCI configuration space
+*/
+static int
+PCI_signature(char *name, struct de4x5_private *lp)
+{
+    int i, status = 0, siglen = ARRAY_SIZE(de4x5_signatures);
+
+    if (lp->chipset == DC21040) {
+	strcpy(name, "DE434/5");
+	return status;
+    } else {                           /* Search for a DEC name in the SROM */
+	int tmp = *((char *)&lp->srom + 19) * 3;
+	strncpy(name, (char *)&lp->srom + 26 + tmp, 8);
+    }
+    name[8] = '\0';
+    for (i=0; i<siglen; i++) {
+	if (strstr(name,de4x5_signatures[i])!=NULL) break;
+    }
+    if (i == siglen) {
+	if (dec_only) {
+	    *name = '\0';
+	} else {                        /* Use chip name to avoid confusion */
+	    strcpy(name, (((lp->chipset == DC21040) ? "DC21040" :
+			   ((lp->chipset == DC21041) ? "DC21041" :
+			    ((lp->chipset == DC21140) ? "DC21140" :
+			     ((lp->chipset == DC21142) ? "DC21142" :
+			      ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN"
+			     )))))));
+	}
+	if (lp->chipset != DC21041) {
+	    lp->useSROM = true;             /* card is not recognisably DEC */
+	}
+    } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+	lp->useSROM = true;
+    }
+
+    return status;
+}
+
+/*
+** Set up the Ethernet PROM counter to the start of the Ethernet address on
+** the DC21040, else  read the SROM for the other chips.
+** The SROM may not be present in a multi-MAC card, so first read the
+** MAC address and check for a bad address. If there is a bad one then exit
+** immediately with the prior srom contents intact (the h/w address will
+** be fixed up later).
+*/
+static void
+DevicePresent(struct net_device *dev, u_long aprom_addr)
+{
+    int i, j=0;
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    if (lp->chipset == DC21040) {
+	if (lp->bus == EISA) {
+	    enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */
+	} else {
+	    outl(0, aprom_addr);       /* Reset Ethernet Address ROM Pointer */
+	}
+    } else {                           /* Read new srom */
+	u_short tmp;
+	__le16 *p = (__le16 *)((char *)&lp->srom + SROM_HWADD);
+	for (i=0; i<(ETH_ALEN>>1); i++) {
+	    tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i);
+	    j += tmp;	/* for check for 0:0:0:0:0:0 or ff:ff:ff:ff:ff:ff */
+	    *p = cpu_to_le16(tmp);
+	}
+	if (j == 0 || j == 3 * 0xffff) {
+		/* could get 0 only from all-0 and 3 * 0xffff only from all-1 */
+		return;
+	}
+
+	p = (__le16 *)&lp->srom;
+	for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) {
+	    tmp = srom_rd(aprom_addr, i);
+	    *p++ = cpu_to_le16(tmp);
+	}
+	de4x5_dbg_srom((struct de4x5_srom *)&lp->srom);
+    }
+}
+
+/*
+** Since the write on the Enet PROM register doesn't seem to reset the PROM
+** pointer correctly (at least on my DE425 EISA card), this routine should do
+** it...from depca.c.
+*/
+static void
+enet_addr_rst(u_long aprom_addr)
+{
+    union {
+	struct {
+	    u32 a;
+	    u32 b;
+	} llsig;
+	char Sig[sizeof(u32) << 1];
+    } dev;
+    short sigLength=0;
+    s8 data;
+    int i, j;
+
+    dev.llsig.a = ETH_PROM_SIG;
+    dev.llsig.b = ETH_PROM_SIG;
+    sigLength = sizeof(u32) << 1;
+
+    for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
+	data = inb(aprom_addr);
+	if (dev.Sig[j] == data) {    /* track signature */
+	    j++;
+	} else {                     /* lost signature; begin search again */
+	    if (data == dev.Sig[0]) {  /* rare case.... */
+		j=1;
+	    } else {
+		j=0;
+	    }
+	}
+    }
+}
+
+/*
+** For the bad status case and no SROM, then add one to the previous
+** address. However, need to add one backwards in case we have 0xff
+** as one or more of the bytes. Only the last 3 bytes should be checked
+** as the first three are invariant - assigned to an organisation.
+*/
+static int
+get_hw_addr(struct net_device *dev)
+{
+    u_long iobase = dev->base_addr;
+    int broken, i, k, tmp, status = 0;
+    u_short j,chksum;
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    broken = de4x5_bad_srom(lp);
+
+    for (i=0,k=0,j=0;j<3;j++) {
+	k <<= 1;
+	if (k > 0xffff) k-=0xffff;
+
+	if (lp->bus == PCI) {
+	    if (lp->chipset == DC21040) {
+		while ((tmp = inl(DE4X5_APROM)) < 0);
+		k += (u_char) tmp;
+		dev->dev_addr[i++] = (u_char) tmp;
+		while ((tmp = inl(DE4X5_APROM)) < 0);
+		k += (u_short) (tmp << 8);
+		dev->dev_addr[i++] = (u_char) tmp;
+	    } else if (!broken) {
+		dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
+		dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++;
+	    } else if ((broken == SMC) || (broken == ACCTON)) {
+		dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
+		dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++;
+	    }
+	} else {
+	    k += (u_char) (tmp = inb(EISA_APROM));
+	    dev->dev_addr[i++] = (u_char) tmp;
+	    k += (u_short) ((tmp = inb(EISA_APROM)) << 8);
+	    dev->dev_addr[i++] = (u_char) tmp;
+	}
+
+	if (k > 0xffff) k-=0xffff;
+    }
+    if (k == 0xffff) k=0;
+
+    if (lp->bus == PCI) {
+	if (lp->chipset == DC21040) {
+	    while ((tmp = inl(DE4X5_APROM)) < 0);
+	    chksum = (u_char) tmp;
+	    while ((tmp = inl(DE4X5_APROM)) < 0);
+	    chksum |= (u_short) (tmp << 8);
+	    if ((k != chksum) && (dec_only)) status = -1;
+	}
+    } else {
+	chksum = (u_char) inb(EISA_APROM);
+	chksum |= (u_short) (inb(EISA_APROM) << 8);
+	if ((k != chksum) && (dec_only)) status = -1;
+    }
+
+    /* If possible, try to fix a broken card - SMC only so far */
+    srom_repair(dev, broken);
+
+#ifdef CONFIG_PPC_PMAC
+    /*
+    ** If the address starts with 00 a0, we have to bit-reverse
+    ** each byte of the address.
+    */
+    if ( machine_is(powermac) &&
+	 (dev->dev_addr[0] == 0) &&
+	 (dev->dev_addr[1] == 0xa0) )
+    {
+	    for (i = 0; i < ETH_ALEN; ++i)
+	    {
+		    int x = dev->dev_addr[i];
+		    x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4);
+		    x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2);
+		    dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1);
+	    }
+    }
+#endif /* CONFIG_PPC_PMAC */
+
+    /* Test for a bad enet address */
+    status = test_bad_enet(dev, status);
+
+    return status;
+}
+
+/*
+** Test for enet addresses in the first 32 bytes. The built-in strncmp
+** didn't seem to work here...?
+*/
+static int
+de4x5_bad_srom(struct de4x5_private *lp)
+{
+    int i, status = 0;
+
+    for (i = 0; i < ARRAY_SIZE(enet_det); i++) {
+	if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) &&
+	    !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) {
+	    if (i == 0) {
+		status = SMC;
+	    } else if (i == 1) {
+		status = ACCTON;
+	    }
+	    break;
+	}
+    }
+
+    return status;
+}
+
+static int
+de4x5_strncmp(char *a, char *b, int n)
+{
+    int ret=0;
+
+    for (;n && !ret; n--) {
+	ret = *a++ - *b++;
+    }
+
+    return ret;
+}
+
+static void
+srom_repair(struct net_device *dev, int card)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    switch(card) {
+      case SMC:
+	memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom));
+	memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN);
+	memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100);
+	lp->useSROM = true;
+	break;
+    }
+}
+
+/*
+** Assume that the irq's do not follow the PCI spec - this is seems
+** to be true so far (2 for 2).
+*/
+static int
+test_bad_enet(struct net_device *dev, int status)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i, tmp;
+
+    for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i];
+    if ((tmp == 0) || (tmp == 0x5fa)) {
+	if ((lp->chipset == last.chipset) &&
+	    (lp->bus_num == last.bus) && (lp->bus_num > 0)) {
+	    for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i];
+	    for (i=ETH_ALEN-1; i>2; --i) {
+		dev->dev_addr[i] += 1;
+		if (dev->dev_addr[i] != 0) break;
+	    }
+	    for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
+	    if (!an_exception(lp)) {
+		dev->irq = last.irq;
+	    }
+
+	    status = 0;
+	}
+    } else if (!status) {
+	last.chipset = lp->chipset;
+	last.bus = lp->bus_num;
+	last.irq = dev->irq;
+	for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i];
+    }
+
+    return status;
+}
+
+/*
+** List of board exceptions with correctly wired IRQs
+*/
+static int
+an_exception(struct de4x5_private *lp)
+{
+    if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) &&
+	(*(u_short *)lp->srom.sub_system_id == 0x95e0)) {
+	return -1;
+    }
+
+    return 0;
+}
+
+/*
+** SROM Read
+*/
+static short
+srom_rd(u_long addr, u_char offset)
+{
+    sendto_srom(SROM_RD | SROM_SR, addr);
+
+    srom_latch(SROM_RD | SROM_SR | DT_CS, addr);
+    srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr);
+    srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset);
+
+    return srom_data(SROM_RD | SROM_SR | DT_CS, addr);
+}
+
+static void
+srom_latch(u_int command, u_long addr)
+{
+    sendto_srom(command, addr);
+    sendto_srom(command | DT_CLK, addr);
+    sendto_srom(command, addr);
+}
+
+static void
+srom_command(u_int command, u_long addr)
+{
+    srom_latch(command, addr);
+    srom_latch(command, addr);
+    srom_latch((command & 0x0000ff00) | DT_CS, addr);
+}
+
+static void
+srom_address(u_int command, u_long addr, u_char offset)
+{
+    int i, a;
+
+    a = offset << 2;
+    for (i=0; i<6; i++, a <<= 1) {
+	srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr);
+    }
+    udelay(1);
+
+    i = (getfrom_srom(addr) >> 3) & 0x01;
+}
+
+static short
+srom_data(u_int command, u_long addr)
+{
+    int i;
+    short word = 0;
+    s32 tmp;
+
+    for (i=0; i<16; i++) {
+	sendto_srom(command  | DT_CLK, addr);
+	tmp = getfrom_srom(addr);
+	sendto_srom(command, addr);
+
+	word = (word << 1) | ((tmp >> 3) & 0x01);
+    }
+
+    sendto_srom(command & 0x0000ff00, addr);
+
+    return word;
+}
+
+/*
+static void
+srom_busy(u_int command, u_long addr)
+{
+   sendto_srom((command & 0x0000ff00) | DT_CS, addr);
+
+   while (!((getfrom_srom(addr) >> 3) & 0x01)) {
+       mdelay(1);
+   }
+
+   sendto_srom(command & 0x0000ff00, addr);
+}
+*/
+
+static void
+sendto_srom(u_int command, u_long addr)
+{
+    outl(command, addr);
+    udelay(1);
+}
+
+static int
+getfrom_srom(u_long addr)
+{
+    s32 tmp;
+
+    tmp = inl(addr);
+    udelay(1);
+
+    return tmp;
+}
+
+static int
+srom_infoleaf_info(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i, count;
+    u_char *p;
+
+    /* Find the infoleaf decoder function that matches this chipset */
+    for (i=0; i<INFOLEAF_SIZE; i++) {
+	if (lp->chipset == infoleaf_array[i].chipset) break;
+    }
+    if (i == INFOLEAF_SIZE) {
+	lp->useSROM = false;
+	printk("%s: Cannot find correct chipset for SROM decoding!\n",
+	                                                          dev->name);
+	return -ENXIO;
+    }
+
+    lp->infoleaf_fn = infoleaf_array[i].fn;
+
+    /* Find the information offset that this function should use */
+    count = *((u_char *)&lp->srom + 19);
+    p  = (u_char *)&lp->srom + 26;
+
+    if (count > 1) {
+	for (i=count; i; --i, p+=3) {
+	    if (lp->device == *p) break;
+	}
+	if (i == 0) {
+	    lp->useSROM = false;
+	    printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
+	                                               dev->name, lp->device);
+	    return -ENXIO;
+	}
+    }
+
+	lp->infoleaf_offset = get_unaligned_le16(p + 1);
+
+    return 0;
+}
+
+/*
+** This routine loads any type 1 or 3 MII info into the mii device
+** struct and executes any type 5 code to reset PHY devices for this
+** controller.
+** The info for the MII devices will be valid since the index used
+** will follow the discovery process from MII address 1-31 then 0.
+*/
+static void
+srom_init(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+    u_char count;
+
+    p+=2;
+    if (lp->chipset == DC21140) {
+	lp->cache.gepc = (*p++ | GEP_CTRL);
+	gep_wr(lp->cache.gepc, dev);
+    }
+
+    /* Block count */
+    count = *p++;
+
+    /* Jump the infoblocks to find types */
+    for (;count; --count) {
+	if (*p < 128) {
+	    p += COMPACT_LEN;
+	} else if (*(p+1) == 5) {
+	    type5_infoblock(dev, 1, p);
+	    p += ((*p & BLOCK_LEN) + 1);
+	} else if (*(p+1) == 4) {
+	    p += ((*p & BLOCK_LEN) + 1);
+	} else if (*(p+1) == 3) {
+	    type3_infoblock(dev, 1, p);
+	    p += ((*p & BLOCK_LEN) + 1);
+	} else if (*(p+1) == 2) {
+	    p += ((*p & BLOCK_LEN) + 1);
+	} else if (*(p+1) == 1) {
+	    type1_infoblock(dev, 1, p);
+	    p += ((*p & BLOCK_LEN) + 1);
+	} else {
+	    p += ((*p & BLOCK_LEN) + 1);
+	}
+    }
+}
+
+/*
+** A generic routine that writes GEP control, data and reset information
+** to the GEP register (21140) or csr15 GEP portion (2114[23]).
+*/
+static void
+srom_exec(struct net_device *dev, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    u_char count = (p ? *p++ : 0);
+    u_short *w = (u_short *)p;
+
+    if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return;
+
+    if (lp->chipset != DC21140) RESET_SIA;
+
+    while (count--) {
+	gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ?
+		                                   *p++ : get_unaligned_le16(w++)), dev);
+	mdelay(2);                          /* 2ms per action */
+    }
+
+    if (lp->chipset != DC21140) {
+	outl(lp->cache.csr14, DE4X5_STRR);
+	outl(lp->cache.csr13, DE4X5_SICR);
+    }
+}
+
+/*
+** Basically this function is a NOP since it will never be called,
+** unless I implement the DC21041 SROM functions. There's no need
+** since the existing code will be satisfactory for all boards.
+*/
+static int
+dc21041_infoleaf(struct net_device *dev)
+{
+    return DE4X5_AUTOSENSE_MS;
+}
+
+static int
+dc21140_infoleaf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char count = 0;
+    u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+
+    /* Read the connection type */
+    p+=2;
+
+    /* GEP control */
+    lp->cache.gepc = (*p++ | GEP_CTRL);
+
+    /* Block count */
+    count = *p++;
+
+    /* Recursively figure out the info blocks */
+    if (*p < 128) {
+	next_tick = dc_infoblock[COMPACT](dev, count, p);
+    } else {
+	next_tick = dc_infoblock[*(p+1)](dev, count, p);
+    }
+
+    if (lp->tcount == count) {
+	lp->media = NC;
+        if (lp->media != lp->c_media) {
+	    de4x5_dbg_media(dev);
+	    lp->c_media = lp->media;
+	}
+	lp->media = INIT;
+	lp->tcount = 0;
+	lp->tx_enable = false;
+    }
+
+    return next_tick & ~TIMER_CB;
+}
+
+static int
+dc21142_infoleaf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char count = 0;
+    u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+
+    /* Read the connection type */
+    p+=2;
+
+    /* Block count */
+    count = *p++;
+
+    /* Recursively figure out the info blocks */
+    if (*p < 128) {
+	next_tick = dc_infoblock[COMPACT](dev, count, p);
+    } else {
+	next_tick = dc_infoblock[*(p+1)](dev, count, p);
+    }
+
+    if (lp->tcount == count) {
+	lp->media = NC;
+        if (lp->media != lp->c_media) {
+	    de4x5_dbg_media(dev);
+	    lp->c_media = lp->media;
+	}
+	lp->media = INIT;
+	lp->tcount = 0;
+	lp->tx_enable = false;
+    }
+
+    return next_tick & ~TIMER_CB;
+}
+
+static int
+dc21143_infoleaf(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char count = 0;
+    u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset;
+    int next_tick = DE4X5_AUTOSENSE_MS;
+
+    /* Read the connection type */
+    p+=2;
+
+    /* Block count */
+    count = *p++;
+
+    /* Recursively figure out the info blocks */
+    if (*p < 128) {
+	next_tick = dc_infoblock[COMPACT](dev, count, p);
+    } else {
+	next_tick = dc_infoblock[*(p+1)](dev, count, p);
+    }
+    if (lp->tcount == count) {
+	lp->media = NC;
+        if (lp->media != lp->c_media) {
+	    de4x5_dbg_media(dev);
+	    lp->c_media = lp->media;
+	}
+	lp->media = INIT;
+	lp->tcount = 0;
+	lp->tx_enable = false;
+    }
+
+    return next_tick & ~TIMER_CB;
+}
+
+/*
+** The compact infoblock is only designed for DC21140[A] chips, so
+** we'll reuse the dc21140m_autoconf function. Non MII media only.
+*/
+static int
+compact_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char flags, csr6;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+COMPACT_LEN) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN);
+	} else {
+	    return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN);
+	}
+    }
+
+    if ((lp->media == INIT) && (lp->timeout < 0)) {
+        lp->ibn = COMPACT;
+        lp->active = 0;
+	gep_wr(lp->cache.gepc, dev);
+	lp->infoblock_media = (*p++) & COMPACT_MC;
+	lp->cache.gep = *p++;
+	csr6 = *p++;
+	flags = *p++;
+
+	lp->asBitValid = (flags & 0x80) ? 0 : -1;
+	lp->defMedium = (flags & 0x40) ? -1 : 0;
+	lp->asBit = 1 << ((csr6 >> 1) & 0x07);
+	lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
+	lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
+	lp->useMII = false;
+
+	de4x5_switch_mac_port(dev);
+    }
+
+    return dc21140m_autoconf(dev);
+}
+
+/*
+** This block describes non MII media for the DC21140[A] only.
+*/
+static int
+type0_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+len) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+len);
+	} else {
+	    return dc_infoblock[*(p+len+1)](dev, count, p+len);
+	}
+    }
+
+    if ((lp->media == INIT) && (lp->timeout < 0)) {
+        lp->ibn = 0;
+        lp->active = 0;
+        gep_wr(lp->cache.gepc, dev);
+	p+=2;
+	lp->infoblock_media = (*p++) & BLOCK0_MC;
+	lp->cache.gep = *p++;
+	csr6 = *p++;
+	flags = *p++;
+
+	lp->asBitValid = (flags & 0x80) ? 0 : -1;
+	lp->defMedium = (flags & 0x40) ? -1 : 0;
+	lp->asBit = 1 << ((csr6 >> 1) & 0x07);
+	lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
+	lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
+	lp->useMII = false;
+
+	de4x5_switch_mac_port(dev);
+    }
+
+    return dc21140m_autoconf(dev);
+}
+
+/* These functions are under construction! */
+
+static int
+type1_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char len = (*p & BLOCK_LEN)+1;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+len) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+len);
+	} else {
+	    return dc_infoblock[*(p+len+1)](dev, count, p+len);
+	}
+    }
+
+    p += 2;
+    if (lp->state == INITIALISED) {
+        lp->ibn = 1;
+	lp->active = *p++;
+	lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1);
+	lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1);
+	lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].ttm = get_unaligned_le16(p);
+	return 0;
+    } else if ((lp->media == INIT) && (lp->timeout < 0)) {
+        lp->ibn = 1;
+        lp->active = *p;
+	lp->infoblock_csr6 = OMR_MII_100;
+	lp->useMII = true;
+	lp->infoblock_media = ANS;
+
+	de4x5_switch_mac_port(dev);
+    }
+
+    return dc21140m_autoconf(dev);
+}
+
+static int
+type2_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char len = (*p & BLOCK_LEN)+1;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+len) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+len);
+	} else {
+	    return dc_infoblock[*(p+len+1)](dev, count, p+len);
+	}
+    }
+
+    if ((lp->media == INIT) && (lp->timeout < 0)) {
+        lp->ibn = 2;
+        lp->active = 0;
+	p += 2;
+	lp->infoblock_media = (*p) & MEDIA_CODE;
+
+        if ((*p++) & EXT_FIELD) {
+	    lp->cache.csr13 = get_unaligned_le16(p); p += 2;
+	    lp->cache.csr14 = get_unaligned_le16(p); p += 2;
+	    lp->cache.csr15 = get_unaligned_le16(p); p += 2;
+	} else {
+	    lp->cache.csr13 = CSR13;
+	    lp->cache.csr14 = CSR14;
+	    lp->cache.csr15 = CSR15;
+	}
+        lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
+        lp->cache.gep  = ((s32)(get_unaligned_le16(p)) << 16);
+	lp->infoblock_csr6 = OMR_SIA;
+	lp->useMII = false;
+
+	de4x5_switch_mac_port(dev);
+    }
+
+    return dc2114x_autoconf(dev);
+}
+
+static int
+type3_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char len = (*p & BLOCK_LEN)+1;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+len) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+len);
+	} else {
+	    return dc_infoblock[*(p+len+1)](dev, count, p+len);
+	}
+    }
+
+    p += 2;
+    if (lp->state == INITIALISED) {
+        lp->ibn = 3;
+        lp->active = *p++;
+	if (MOTO_SROM_BUG) lp->active = 0;
+	lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
+	lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
+	lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
+	lp->phy[lp->active].mci = *p;
+	return 0;
+    } else if ((lp->media == INIT) && (lp->timeout < 0)) {
+        lp->ibn = 3;
+	lp->active = *p;
+	if (MOTO_SROM_BUG) lp->active = 0;
+	lp->infoblock_csr6 = OMR_MII_100;
+	lp->useMII = true;
+	lp->infoblock_media = ANS;
+
+	de4x5_switch_mac_port(dev);
+    }
+
+    return dc2114x_autoconf(dev);
+}
+
+static int
+type4_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char flags, csr6, len = (*p & BLOCK_LEN)+1;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+len) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+len);
+	} else {
+	    return dc_infoblock[*(p+len+1)](dev, count, p+len);
+	}
+    }
+
+    if ((lp->media == INIT) && (lp->timeout < 0)) {
+        lp->ibn = 4;
+        lp->active = 0;
+	p+=2;
+	lp->infoblock_media = (*p++) & MEDIA_CODE;
+        lp->cache.csr13 = CSR13;              /* Hard coded defaults */
+	lp->cache.csr14 = CSR14;
+	lp->cache.csr15 = CSR15;
+        lp->cache.gepc = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
+        lp->cache.gep  = ((s32)(get_unaligned_le16(p)) << 16); p += 2;
+	csr6 = *p++;
+	flags = *p++;
+
+	lp->asBitValid = (flags & 0x80) ? 0 : -1;
+	lp->defMedium = (flags & 0x40) ? -1 : 0;
+	lp->asBit = 1 << ((csr6 >> 1) & 0x07);
+	lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
+	lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
+	lp->useMII = false;
+
+	de4x5_switch_mac_port(dev);
+    }
+
+    return dc2114x_autoconf(dev);
+}
+
+/*
+** This block type provides information for resetting external devices
+** (chips) through the General Purpose Register.
+*/
+static int
+type5_infoblock(struct net_device *dev, u_char count, u_char *p)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_char len = (*p & BLOCK_LEN)+1;
+
+    /* Recursively figure out the info blocks */
+    if (--count > lp->tcount) {
+	if (*(p+len) < 128) {
+	    return dc_infoblock[COMPACT](dev, count, p+len);
+	} else {
+	    return dc_infoblock[*(p+len+1)](dev, count, p+len);
+	}
+    }
+
+    /* Must be initializing to run this code */
+    if ((lp->state == INITIALISED) || (lp->media == INIT)) {
+	p+=2;
+        lp->rst = p;
+        srom_exec(dev, lp->rst);
+    }
+
+    return DE4X5_AUTOSENSE_MS;
+}
+
+/*
+** MII Read/Write
+*/
+
+static int
+mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr)
+{
+    mii_wdata(MII_PREAMBLE,  2, ioaddr);   /* Start of 34 bit preamble...    */
+    mii_wdata(MII_PREAMBLE, 32, ioaddr);   /* ...continued                   */
+    mii_wdata(MII_STRD, 4, ioaddr);        /* SFD and Read operation         */
+    mii_address(phyaddr, ioaddr);          /* PHY address to be accessed     */
+    mii_address(phyreg, ioaddr);           /* PHY Register to read           */
+    mii_ta(MII_STRD, ioaddr);              /* Turn around time - 2 MDC       */
+
+    return mii_rdata(ioaddr);              /* Read data                      */
+}
+
+static void
+mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr)
+{
+    mii_wdata(MII_PREAMBLE,  2, ioaddr);   /* Start of 34 bit preamble...    */
+    mii_wdata(MII_PREAMBLE, 32, ioaddr);   /* ...continued                   */
+    mii_wdata(MII_STWR, 4, ioaddr);        /* SFD and Write operation        */
+    mii_address(phyaddr, ioaddr);          /* PHY address to be accessed     */
+    mii_address(phyreg, ioaddr);           /* PHY Register to write          */
+    mii_ta(MII_STWR, ioaddr);              /* Turn around time - 2 MDC       */
+    data = mii_swap(data, 16);             /* Swap data bit ordering         */
+    mii_wdata(data, 16, ioaddr);           /* Write data                     */
+}
+
+static int
+mii_rdata(u_long ioaddr)
+{
+    int i;
+    s32 tmp = 0;
+
+    for (i=0; i<16; i++) {
+	tmp <<= 1;
+	tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr);
+    }
+
+    return tmp;
+}
+
+static void
+mii_wdata(int data, int len, u_long ioaddr)
+{
+    int i;
+
+    for (i=0; i<len; i++) {
+	sendto_mii(MII_MWR | MII_WR, data, ioaddr);
+	data >>= 1;
+    }
+}
+
+static void
+mii_address(u_char addr, u_long ioaddr)
+{
+    int i;
+
+    addr = mii_swap(addr, 5);
+    for (i=0; i<5; i++) {
+	sendto_mii(MII_MWR | MII_WR, addr, ioaddr);
+	addr >>= 1;
+    }
+}
+
+static void
+mii_ta(u_long rw, u_long ioaddr)
+{
+    if (rw == MII_STWR) {
+	sendto_mii(MII_MWR | MII_WR, 1, ioaddr);
+	sendto_mii(MII_MWR | MII_WR, 0, ioaddr);
+    } else {
+	getfrom_mii(MII_MRD | MII_RD, ioaddr);        /* Tri-state MDIO */
+    }
+}
+
+static int
+mii_swap(int data, int len)
+{
+    int i, tmp = 0;
+
+    for (i=0; i<len; i++) {
+	tmp <<= 1;
+	tmp |= (data & 1);
+	data >>= 1;
+    }
+
+    return tmp;
+}
+
+static void
+sendto_mii(u32 command, int data, u_long ioaddr)
+{
+    u32 j;
+
+    j = (data & 1) << 17;
+    outl(command | j, ioaddr);
+    udelay(1);
+    outl(command | MII_MDC | j, ioaddr);
+    udelay(1);
+}
+
+static int
+getfrom_mii(u32 command, u_long ioaddr)
+{
+    outl(command, ioaddr);
+    udelay(1);
+    outl(command | MII_MDC, ioaddr);
+    udelay(1);
+
+    return (inl(ioaddr) >> 19) & 1;
+}
+
+/*
+** Here's 3 ways to calculate the OUI from the ID registers.
+*/
+static int
+mii_get_oui(u_char phyaddr, u_long ioaddr)
+{
+/*
+    union {
+	u_short reg;
+	u_char breg[2];
+    } a;
+    int i, r2, r3, ret=0;*/
+    int r2, r3;
+
+    /* Read r2 and r3 */
+    r2 = mii_rd(MII_ID0, phyaddr, ioaddr);
+    r3 = mii_rd(MII_ID1, phyaddr, ioaddr);
+                                                /* SEEQ and Cypress way * /
+    / * Shuffle r2 and r3 * /
+    a.reg=0;
+    r3 = ((r3>>10)|(r2<<6))&0x0ff;
+    r2 = ((r2>>2)&0x3fff);
+
+    / * Bit reverse r3 * /
+    for (i=0;i<8;i++) {
+	ret<<=1;
+	ret |= (r3&1);
+	r3>>=1;
+    }
+
+    / * Bit reverse r2 * /
+    for (i=0;i<16;i++) {
+	a.reg<<=1;
+	a.reg |= (r2&1);
+	r2>>=1;
+    }
+
+    / * Swap r2 bytes * /
+    i=a.breg[0];
+    a.breg[0]=a.breg[1];
+    a.breg[1]=i;
+
+    return (a.reg<<8)|ret; */                 /* SEEQ and Cypress way */
+/*    return (r2<<6)|(u_int)(r3>>10); */      /* NATIONAL and BROADCOM way */
+    return r2;                                  /* (I did it) My way */
+}
+
+/*
+** The SROM spec forces us to search addresses [1-31 0]. Bummer.
+*/
+static int
+mii_get_phy(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    int i, j, k, n, limit=ARRAY_SIZE(phy_info);
+    int id;
+
+    lp->active = 0;
+    lp->useMII = true;
+
+    /* Search the MII address space for possible PHY devices */
+    for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
+	lp->phy[lp->active].addr = i;
+	if (i==0) n++;                             /* Count cycles */
+	while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */
+	id = mii_get_oui(i, DE4X5_MII);
+	if ((id == 0) || (id == 65535)) continue;  /* Valid ID? */
+	for (j=0; j<limit; j++) {                  /* Search PHY table */
+	    if (id != phy_info[j].id) continue;    /* ID match? */
+	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
+	    if (k < DE4X5_MAX_PHY) {
+		memcpy((char *)&lp->phy[k],
+		       (char *)&phy_info[j], sizeof(struct phy_table));
+		lp->phy[k].addr = i;
+		lp->mii_cnt++;
+		lp->active++;
+	    } else {
+		goto purgatory;                    /* Stop the search */
+	    }
+	    break;
+	}
+	if ((j == limit) && (i < DE4X5_MAX_MII)) {
+	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
+	    lp->phy[k].addr = i;
+	    lp->phy[k].id = id;
+	    lp->phy[k].spd.reg = GENERIC_REG;      /* ANLPA register         */
+	    lp->phy[k].spd.mask = GENERIC_MASK;    /* 100Mb/s technologies   */
+	    lp->phy[k].spd.value = GENERIC_VALUE;  /* TX & T4, H/F Duplex    */
+	    lp->mii_cnt++;
+	    lp->active++;
+	    printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
+	    j = de4x5_debug;
+	    de4x5_debug |= DEBUG_MII;
+	    de4x5_dbg_mii(dev, k);
+	    de4x5_debug = j;
+	    printk("\n");
+	}
+    }
+  purgatory:
+    lp->active = 0;
+    if (lp->phy[0].id) {                           /* Reset the PHY devices */
+	for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
+	    mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
+	    while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
+
+	    de4x5_dbg_mii(dev, k);
+	}
+    }
+    if (!lp->mii_cnt) lp->useMII = false;
+
+    return lp->mii_cnt;
+}
+
+static char *
+build_setup_frame(struct net_device *dev, int mode)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i;
+    char *pa = lp->setup_frame;
+
+    /* Initialise the setup frame */
+    if (mode == ALL) {
+	memset(lp->setup_frame, 0, SETUP_FRAME_LEN);
+    }
+
+    if (lp->setup_f == HASH_PERF) {
+	for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) {
+	    *(pa + i) = dev->dev_addr[i];                 /* Host address */
+	    if (i & 0x01) pa += 2;
+	}
+	*(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80;
+    } else {
+	for (i=0; i<ETH_ALEN; i++) { /* Host address */
+	    *(pa + (i&1)) = dev->dev_addr[i];
+	    if (i & 0x01) pa += 4;
+	}
+	for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */
+	    *(pa + (i&1)) = (char) 0xff;
+	    if (i & 0x01) pa += 4;
+	}
+    }
+
+    return pa;                     /* Points to the next entry */
+}
+
+static void
+disable_ast(struct net_device *dev)
+{
+	struct de4x5_private *lp = netdev_priv(dev);
+	del_timer_sync(&lp->timer);
+}
+
+static long
+de4x5_switch_mac_port(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+    s32 omr;
+
+    STOP_DE4X5;
+
+    /* Assert the OMR_PS bit in CSR6 */
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR |
+			                                             OMR_FDX));
+    omr |= lp->infoblock_csr6;
+    if (omr & OMR_PS) omr |= OMR_HBD;
+    outl(omr, DE4X5_OMR);
+
+    /* Soft Reset */
+    RESET_DE4X5;
+
+    /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */
+    if (lp->chipset == DC21140) {
+	gep_wr(lp->cache.gepc, dev);
+	gep_wr(lp->cache.gep, dev);
+    } else if ((lp->chipset & ~0x0ff) == DC2114x) {
+	reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15);
+    }
+
+    /* Restore CSR6 */
+    outl(omr, DE4X5_OMR);
+
+    /* Reset CSR8 */
+    inl(DE4X5_MFC);
+
+    return omr;
+}
+
+static void
+gep_wr(s32 data, struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if (lp->chipset == DC21140) {
+	outl(data, DE4X5_GEP);
+    } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+	outl((data<<16) | lp->cache.csr15, DE4X5_SIGR);
+    }
+}
+
+static int
+gep_rd(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if (lp->chipset == DC21140) {
+	return inl(DE4X5_GEP);
+    } else if ((lp->chipset & ~0x00ff) == DC2114x) {
+	return inl(DE4X5_SIGR) & 0x000fffff;
+    }
+
+    return 0;
+}
+
+static void
+yawn(struct net_device *dev, int state)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return;
+
+    if(lp->bus == EISA) {
+	switch(state) {
+	  case WAKEUP:
+	    outb(WAKEUP, PCI_CFPM);
+	    mdelay(10);
+	    break;
+
+	  case SNOOZE:
+	    outb(SNOOZE, PCI_CFPM);
+	    break;
+
+	  case SLEEP:
+	    outl(0, DE4X5_SICR);
+	    outb(SLEEP, PCI_CFPM);
+	    break;
+	}
+    } else {
+	struct pci_dev *pdev = to_pci_dev (lp->gendev);
+	switch(state) {
+	  case WAKEUP:
+	    pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP);
+	    mdelay(10);
+	    break;
+
+	  case SNOOZE:
+	    pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE);
+	    break;
+
+	  case SLEEP:
+	    outl(0, DE4X5_SICR);
+	    pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP);
+	    break;
+	}
+    }
+}
+
+static void
+de4x5_parse_params(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    char *p, *q, t;
+
+    lp->params.fdx = 0;
+    lp->params.autosense = AUTO;
+
+    if (args == NULL) return;
+
+    if ((p = strstr(args, dev->name))) {
+	if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p);
+	t = *q;
+	*q = '\0';
+
+	if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1;
+
+	if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) {
+	    if (strstr(p, "TP")) {
+		lp->params.autosense = TP;
+	    } else if (strstr(p, "TP_NW")) {
+		lp->params.autosense = TP_NW;
+	    } else if (strstr(p, "BNC")) {
+		lp->params.autosense = BNC;
+	    } else if (strstr(p, "AUI")) {
+		lp->params.autosense = AUI;
+	    } else if (strstr(p, "BNC_AUI")) {
+		lp->params.autosense = BNC;
+	    } else if (strstr(p, "10Mb")) {
+		lp->params.autosense = _10Mb;
+	    } else if (strstr(p, "100Mb")) {
+		lp->params.autosense = _100Mb;
+	    } else if (strstr(p, "AUTO")) {
+		lp->params.autosense = AUTO;
+	    }
+	}
+	*q = t;
+    }
+}
+
+static void
+de4x5_dbg_open(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    int i;
+
+    if (de4x5_debug & DEBUG_OPEN) {
+	printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq);
+	printk("\tphysical address: ");
+	for (i=0;i<6;i++) {
+	    printk("%2.2x:",(short)dev->dev_addr[i]);
+	}
+	printk("\n");
+	printk("Descriptor head addresses:\n");
+	printk("\t0x%8.8lx  0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring);
+	printk("Descriptor addresses:\nRX: ");
+	for (i=0;i<lp->rxRingSize-1;i++){
+	    if (i < 3) {
+		printk("0x%8.8lx  ",(u_long)&lp->rx_ring[i].status);
+	    }
+	}
+	printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status);
+	printk("TX: ");
+	for (i=0;i<lp->txRingSize-1;i++){
+	    if (i < 3) {
+		printk("0x%8.8lx  ", (u_long)&lp->tx_ring[i].status);
+	    }
+	}
+	printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status);
+	printk("Descriptor buffers:\nRX: ");
+	for (i=0;i<lp->rxRingSize-1;i++){
+	    if (i < 3) {
+		printk("0x%8.8x  ",le32_to_cpu(lp->rx_ring[i].buf));
+	    }
+	}
+	printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf));
+	printk("TX: ");
+	for (i=0;i<lp->txRingSize-1;i++){
+	    if (i < 3) {
+		printk("0x%8.8x  ", le32_to_cpu(lp->tx_ring[i].buf));
+	    }
+	}
+	printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf));
+	printk("Ring size:\nRX: %d\nTX: %d\n",
+	       (short)lp->rxRingSize,
+	       (short)lp->txRingSize);
+    }
+}
+
+static void
+de4x5_dbg_mii(struct net_device *dev, int k)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    u_long iobase = dev->base_addr;
+
+    if (de4x5_debug & DEBUG_MII) {
+	printk("\nMII device address: %d\n", lp->phy[k].addr);
+	printk("MII CR:  %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII));
+	printk("MII SR:  %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII));
+	printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII));
+	printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII));
+	if (lp->phy[k].id != BROADCOM_T4) {
+	    printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII));
+	    printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII));
+	}
+	printk("MII 16:  %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII));
+	if (lp->phy[k].id != BROADCOM_T4) {
+	    printk("MII 17:  %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII));
+	    printk("MII 18:  %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII));
+	} else {
+	    printk("MII 20:  %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII));
+	}
+    }
+}
+
+static void
+de4x5_dbg_media(struct net_device *dev)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+
+    if (lp->media != lp->c_media) {
+	if (de4x5_debug & DEBUG_MEDIA) {
+	    printk("%s: media is %s%s\n", dev->name,
+		   (lp->media == NC  ? "unconnected, link down or incompatible connection" :
+		    (lp->media == TP  ? "TP" :
+		     (lp->media == ANS ? "TP/Nway" :
+		      (lp->media == BNC ? "BNC" :
+		       (lp->media == AUI ? "AUI" :
+			(lp->media == BNC_AUI ? "BNC/AUI" :
+			 (lp->media == EXT_SIA ? "EXT SIA" :
+			  (lp->media == _100Mb  ? "100Mb/s" :
+			   (lp->media == _10Mb   ? "10Mb/s" :
+			    "???"
+			    ))))))))), (lp->fdx?" full duplex.":"."));
+	}
+	lp->c_media = lp->media;
+    }
+}
+
+static void
+de4x5_dbg_srom(struct de4x5_srom *p)
+{
+    int i;
+
+    if (de4x5_debug & DEBUG_SROM) {
+	printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id));
+	printk("Sub-system ID:        %04x\n", *((u_short *)p->sub_system_id));
+	printk("ID Block CRC:         %02x\n", (u_char)(p->id_block_crc));
+	printk("SROM version:         %02x\n", (u_char)(p->version));
+	printk("# controllers:        %02x\n", (u_char)(p->num_controllers));
+
+	printk("Hardware Address:     %pM\n", p->ieee_addr);
+	printk("CRC checksum:         %04x\n", (u_short)(p->chksum));
+	for (i=0; i<64; i++) {
+	    printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i));
+	}
+    }
+}
+
+static void
+de4x5_dbg_rx(struct sk_buff *skb, int len)
+{
+    int i, j;
+
+    if (de4x5_debug & DEBUG_RX) {
+	printk("R: %pM <- %pM len/SAP:%02x%02x [%d]\n",
+	       skb->data, &skb->data[6],
+	       (u_char)skb->data[12],
+	       (u_char)skb->data[13],
+	       len);
+	for (j=0; len>0;j+=16, len-=16) {
+	  printk("    %03x: ",j);
+	  for (i=0; i<16 && i<len; i++) {
+	    printk("%02x ",(u_char)skb->data[i+j]);
+	  }
+	  printk("\n");
+	}
+    }
+}
+
+/*
+** Perform IOCTL call functions here. Some are privileged operations and the
+** effective uid is checked in those cases. In the normal course of events
+** this function is only used for my testing.
+*/
+static int
+de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+    struct de4x5_private *lp = netdev_priv(dev);
+    struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru;
+    u_long iobase = dev->base_addr;
+    int i, j, status = 0;
+    s32 omr;
+    union {
+	u8  addr[144];
+	u16 sval[72];
+	u32 lval[36];
+    } tmp;
+    u_long flags = 0;
+
+    switch(ioc->cmd) {
+    case DE4X5_GET_HWADDR:           /* Get the hardware address */
+	ioc->len = ETH_ALEN;
+	for (i=0; i<ETH_ALEN; i++) {
+	    tmp.addr[i] = dev->dev_addr[i];
+	}
+	if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
+	break;
+
+    case DE4X5_SET_HWADDR:           /* Set the hardware address */
+	if (!capable(CAP_NET_ADMIN)) return -EPERM;
+	if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT;
+	if (netif_queue_stopped(dev))
+		return -EBUSY;
+	netif_stop_queue(dev);
+	for (i=0; i<ETH_ALEN; i++) {
+	    dev->dev_addr[i] = tmp.addr[i];
+	}
+	build_setup_frame(dev, PHYS_ADDR_ONLY);
+	/* Set up the descriptor and give ownership to the card */
+	load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET |
+		                                       SETUP_FRAME_LEN, (struct sk_buff *)1);
+	lp->tx_new = (lp->tx_new + 1) % lp->txRingSize;
+	outl(POLL_DEMAND, DE4X5_TPD);                /* Start the TX */
+	netif_wake_queue(dev);                      /* Unlock the TX ring */
+	break;
+
+    case DE4X5_SAY_BOO:              /* Say "Boo!" to the kernel log file */
+	if (!capable(CAP_NET_ADMIN)) return -EPERM;
+	printk("%s: Boo!\n", dev->name);
+	break;
+
+    case DE4X5_MCA_EN:               /* Enable pass all multicast addressing */
+	if (!capable(CAP_NET_ADMIN)) return -EPERM;
+	omr = inl(DE4X5_OMR);
+	omr |= OMR_PM;
+	outl(omr, DE4X5_OMR);
+	break;
+
+    case DE4X5_GET_STATS:            /* Get the driver statistics */
+    {
+        struct pkt_stats statbuf;
+	ioc->len = sizeof(statbuf);
+	spin_lock_irqsave(&lp->lock, flags);
+	memcpy(&statbuf, &lp->pktStats, ioc->len);
+	spin_unlock_irqrestore(&lp->lock, flags);
+	if (copy_to_user(ioc->data, &statbuf, ioc->len))
+		return -EFAULT;
+	break;
+    }
+    case DE4X5_CLR_STATS:            /* Zero out the driver statistics */
+	if (!capable(CAP_NET_ADMIN)) return -EPERM;
+	spin_lock_irqsave(&lp->lock, flags);
+	memset(&lp->pktStats, 0, sizeof(lp->pktStats));
+	spin_unlock_irqrestore(&lp->lock, flags);
+	break;
+
+    case DE4X5_GET_OMR:              /* Get the OMR Register contents */
+	tmp.addr[0] = inl(DE4X5_OMR);
+	if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT;
+	break;
+
+    case DE4X5_SET_OMR:              /* Set the OMR Register contents */
+	if (!capable(CAP_NET_ADMIN)) return -EPERM;
+	if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT;
+	outl(tmp.addr[0], DE4X5_OMR);
+	break;
+
+    case DE4X5_GET_REG:              /* Get the DE4X5 Registers */
+	j = 0;
+	tmp.lval[0] = inl(DE4X5_STS); j+=4;
+	tmp.lval[1] = inl(DE4X5_BMR); j+=4;
+	tmp.lval[2] = inl(DE4X5_IMR); j+=4;
+	tmp.lval[3] = inl(DE4X5_OMR); j+=4;
+	tmp.lval[4] = inl(DE4X5_SISR); j+=4;
+	tmp.lval[5] = inl(DE4X5_SICR); j+=4;
+	tmp.lval[6] = inl(DE4X5_STRR); j+=4;
+	tmp.lval[7] = inl(DE4X5_SIGR); j+=4;
+	ioc->len = j;
+	if (copy_to_user(ioc->data, tmp.lval, ioc->len))
+		return -EFAULT;
+	break;
+
+#define DE4X5_DUMP              0x0f /* Dump the DE4X5 Status */
+/*
+      case DE4X5_DUMP:
+	j = 0;
+	tmp.addr[j++] = dev->irq;
+	for (i=0; i<ETH_ALEN; i++) {
+	    tmp.addr[j++] = dev->dev_addr[i];
+	}
+	tmp.addr[j++] = lp->rxRingSize;
+	tmp.lval[j>>2] = (long)lp->rx_ring; j+=4;
+	tmp.lval[j>>2] = (long)lp->tx_ring; j+=4;
+
+	for (i=0;i<lp->rxRingSize-1;i++){
+	    if (i < 3) {
+		tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
+	    }
+	}
+	tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4;
+	for (i=0;i<lp->txRingSize-1;i++){
+	    if (i < 3) {
+		tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
+	    }
+	}
+	tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4;
+
+	for (i=0;i<lp->rxRingSize-1;i++){
+	    if (i < 3) {
+		tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
+	    }
+	}
+	tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4;
+	for (i=0;i<lp->txRingSize-1;i++){
+	    if (i < 3) {
+		tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
+	    }
+	}
+	tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4;
+
+	for (i=0;i<lp->rxRingSize;i++){
+	    tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4;
+	}
+	for (i=0;i<lp->txRingSize;i++){
+	    tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4;
+	}
+
+	tmp.lval[j>>2] = inl(DE4X5_BMR);  j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_TPD);  j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_RPD);  j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_STS);  j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_OMR);  j+=4;
+	tmp.lval[j>>2] = inl(DE4X5_IMR);  j+=4;
+	tmp.lval[j>>2] = lp->chipset; j+=4;
+	if (lp->chipset == DC21140) {
+	    tmp.lval[j>>2] = gep_rd(dev);  j+=4;
+	} else {
+	    tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4;
+	    tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4;
+	    tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4;
+	    tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4;
+	}
+	tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4;
+	if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) {
+	    tmp.lval[j>>2] = lp->active; j+=4;
+	    tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    if (lp->phy[lp->active].id != BROADCOM_T4) {
+		tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+		tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    }
+	    tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    if (lp->phy[lp->active].id != BROADCOM_T4) {
+		tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+		tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    } else {
+		tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4;
+	    }
+	}
+
+	tmp.addr[j++] = lp->txRingSize;
+	tmp.addr[j++] = netif_queue_stopped(dev);
+
+	ioc->len = j;
+	if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT;
+	break;
+
+*/
+    default:
+	return -EOPNOTSUPP;
+    }
+
+    return status;
+}
+
+static int __init de4x5_module_init (void)
+{
+	int err = 0;
+
+#ifdef CONFIG_PCI
+	err = pci_register_driver(&de4x5_pci_driver);
+#endif
+#ifdef CONFIG_EISA
+	err |= eisa_driver_register (&de4x5_eisa_driver);
+#endif
+
+	return err;
+}
+
+static void __exit de4x5_module_exit (void)
+{
+#ifdef CONFIG_PCI
+	pci_unregister_driver (&de4x5_pci_driver);
+#endif
+#ifdef CONFIG_EISA
+	eisa_driver_unregister (&de4x5_eisa_driver);
+#endif
+}
+
+module_init (de4x5_module_init);
+module_exit (de4x5_module_exit);
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.h b/drivers/net/ethernet/dec/tulip/de4x5.h
new file mode 100644
index 000000000000..ec756eba397b
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/de4x5.h
@@ -0,0 +1,1017 @@
+/*
+    Copyright 1994 Digital Equipment Corporation.
+
+    This software may be used and distributed according to  the terms of the
+    GNU General Public License, incorporated herein by reference.
+
+    The author may    be  reached as davies@wanton.lkg.dec.com  or   Digital
+    Equipment Corporation, 550 King Street, Littleton MA 01460.
+
+    =========================================================================
+*/
+
+/*
+** DC21040 CSR<1..15> Register Address Map
+*/
+#define DE4X5_BMR    iobase+(0x000 << lp->bus)  /* Bus Mode Register */
+#define DE4X5_TPD    iobase+(0x008 << lp->bus)  /* Transmit Poll Demand Reg */
+#define DE4X5_RPD    iobase+(0x010 << lp->bus)  /* Receive Poll Demand Reg */
+#define DE4X5_RRBA   iobase+(0x018 << lp->bus)  /* RX Ring Base Address Reg */
+#define DE4X5_TRBA   iobase+(0x020 << lp->bus)  /* TX Ring Base Address Reg */
+#define DE4X5_STS    iobase+(0x028 << lp->bus)  /* Status Register */
+#define DE4X5_OMR    iobase+(0x030 << lp->bus)  /* Operation Mode Register */
+#define DE4X5_IMR    iobase+(0x038 << lp->bus)  /* Interrupt Mask Register */
+#define DE4X5_MFC    iobase+(0x040 << lp->bus)  /* Missed Frame Counter */
+#define DE4X5_APROM  iobase+(0x048 << lp->bus)  /* Ethernet Address PROM */
+#define DE4X5_BROM   iobase+(0x048 << lp->bus)  /* Boot ROM Register */
+#define DE4X5_SROM   iobase+(0x048 << lp->bus)  /* Serial ROM Register */
+#define DE4X5_MII    iobase+(0x048 << lp->bus)  /* MII Interface Register */
+#define DE4X5_DDR    iobase+(0x050 << lp->bus)  /* Data Diagnostic Register */
+#define DE4X5_FDR    iobase+(0x058 << lp->bus)  /* Full Duplex Register */
+#define DE4X5_GPT    iobase+(0x058 << lp->bus)  /* General Purpose Timer Reg.*/
+#define DE4X5_GEP    iobase+(0x060 << lp->bus)  /* General Purpose Register */
+#define DE4X5_SISR   iobase+(0x060 << lp->bus)  /* SIA Status Register */
+#define DE4X5_SICR   iobase+(0x068 << lp->bus)  /* SIA Connectivity Register */
+#define DE4X5_STRR   iobase+(0x070 << lp->bus)  /* SIA TX/RX Register */
+#define DE4X5_SIGR   iobase+(0x078 << lp->bus)  /* SIA General Register */
+
+/*
+** EISA Register Address Map
+*/
+#define EISA_ID      iobase+0x0c80   /* EISA ID Registers */
+#define EISA_ID0     iobase+0x0c80   /* EISA ID Register 0 */
+#define EISA_ID1     iobase+0x0c81   /* EISA ID Register 1 */
+#define EISA_ID2     iobase+0x0c82   /* EISA ID Register 2 */
+#define EISA_ID3     iobase+0x0c83   /* EISA ID Register 3 */
+#define EISA_CR      iobase+0x0c84   /* EISA Control Register */
+#define EISA_REG0    iobase+0x0c88   /* EISA Configuration Register 0 */
+#define EISA_REG1    iobase+0x0c89   /* EISA Configuration Register 1 */
+#define EISA_REG2    iobase+0x0c8a   /* EISA Configuration Register 2 */
+#define EISA_REG3    iobase+0x0c8f   /* EISA Configuration Register 3 */
+#define EISA_APROM   iobase+0x0c90   /* Ethernet Address PROM */
+
+/*
+** PCI/EISA Configuration Registers Address Map
+*/
+#define PCI_CFID     iobase+0x0008   /* PCI Configuration ID Register */
+#define PCI_CFCS     iobase+0x000c   /* PCI Command/Status Register */
+#define PCI_CFRV     iobase+0x0018   /* PCI Revision Register */
+#define PCI_CFLT     iobase+0x001c   /* PCI Latency Timer Register */
+#define PCI_CBIO     iobase+0x0028   /* PCI Base I/O Register */
+#define PCI_CBMA     iobase+0x002c   /* PCI Base Memory Address Register */
+#define PCI_CBER     iobase+0x0030   /* PCI Expansion ROM Base Address Reg. */
+#define PCI_CFIT     iobase+0x003c   /* PCI Configuration Interrupt Register */
+#define PCI_CFDA     iobase+0x0040   /* PCI Driver Area Register */
+#define PCI_CFDD     iobase+0x0041   /* PCI Driver Dependent Area Register */
+#define PCI_CFPM     iobase+0x0043   /* PCI Power Management Area Register */
+
+/*
+** EISA Configuration Register 0 bit definitions
+*/
+#define ER0_BSW       0x80           /* EISA Bus Slave Width, 1: 32 bits */
+#define ER0_BMW       0x40           /* EISA Bus Master Width, 1: 32 bits */
+#define ER0_EPT       0x20           /* EISA PREEMPT Time, 0: 23 BCLKs */
+#define ER0_ISTS      0x10           /* Interrupt Status (X) */
+#define ER0_LI        0x08           /* Latch Interrupts */
+#define ER0_INTL      0x06           /* INTerrupt Level */
+#define ER0_INTT      0x01           /* INTerrupt Type, 0: Level, 1: Edge */
+
+/*
+** EISA Configuration Register 1 bit definitions
+*/
+#define ER1_IAM       0xe0           /* ISA Address Mode */
+#define ER1_IAE       0x10           /* ISA Addressing Enable */
+#define ER1_UPIN      0x0f           /* User Pins */
+
+/*
+** EISA Configuration Register 2 bit definitions
+*/
+#define ER2_BRS       0xc0           /* Boot ROM Size */
+#define ER2_BRA       0x3c           /* Boot ROM Address <16:13> */
+
+/*
+** EISA Configuration Register 3 bit definitions
+*/
+#define ER3_BWE       0x40           /* Burst Write Enable */
+#define ER3_BRE       0x04           /* Burst Read Enable */
+#define ER3_LSR       0x02           /* Local Software Reset */
+
+/*
+** PCI Configuration ID Register (PCI_CFID). The Device IDs are left
+** shifted 8 bits to allow detection of DC21142 and DC21143 variants with
+** the configuration revision register step number.
+*/
+#define CFID_DID    0xff00           /* Device ID */
+#define CFID_VID    0x00ff           /* Vendor ID */
+#define DC21040_DID 0x0200           /* Unique Device ID # */
+#define DC21040_VID 0x1011           /* DC21040 Manufacturer */
+#define DC21041_DID 0x1400           /* Unique Device ID # */
+#define DC21041_VID 0x1011           /* DC21041 Manufacturer */
+#define DC21140_DID 0x0900           /* Unique Device ID # */
+#define DC21140_VID 0x1011           /* DC21140 Manufacturer */
+#define DC2114x_DID 0x1900           /* Unique Device ID # */
+#define DC2114x_VID 0x1011           /* DC2114[23] Manufacturer */
+
+/*
+** Chipset defines
+*/
+#define DC21040     DC21040_DID
+#define DC21041     DC21041_DID
+#define DC21140     DC21140_DID
+#define DC2114x     DC2114x_DID
+#define DC21142     (DC2114x_DID | 0x0010)
+#define DC21143     (DC2114x_DID | 0x0030)
+#define DC2114x_BRK 0x0020           /* CFRV break between DC21142 & DC21143 */
+
+#define is_DC21040 ((vendor == DC21040_VID) && (device == DC21040_DID))
+#define is_DC21041 ((vendor == DC21041_VID) && (device == DC21041_DID))
+#define is_DC21140 ((vendor == DC21140_VID) && (device == DC21140_DID))
+#define is_DC2114x ((vendor == DC2114x_VID) && (device == DC2114x_DID))
+#define is_DC21142 ((vendor == DC2114x_VID) && (device == DC21142))
+#define is_DC21143 ((vendor == DC2114x_VID) && (device == DC21143))
+
+/*
+** PCI Configuration Command/Status Register (PCI_CFCS)
+*/
+#define CFCS_DPE    0x80000000       /* Detected Parity Error (S) */
+#define CFCS_SSE    0x40000000       /* Signal System Error   (S) */
+#define CFCS_RMA    0x20000000       /* Receive Master Abort  (S) */
+#define CFCS_RTA    0x10000000       /* Receive Target Abort  (S) */
+#define CFCS_DST    0x06000000       /* DEVSEL Timing         (S) */
+#define CFCS_DPR    0x01000000       /* Data Parity Report    (S) */
+#define CFCS_FBB    0x00800000       /* Fast Back-To-Back     (S) */
+#define CFCS_SEE    0x00000100       /* System Error Enable   (C) */
+#define CFCS_PER    0x00000040       /* Parity Error Response (C) */
+#define CFCS_MO     0x00000004       /* Master Operation      (C) */
+#define CFCS_MSA    0x00000002       /* Memory Space Access   (C) */
+#define CFCS_IOSA   0x00000001       /* I/O Space Access      (C) */
+
+/*
+** PCI Configuration Revision Register (PCI_CFRV)
+*/
+#define CFRV_BC     0xff000000       /* Base Class */
+#define CFRV_SC     0x00ff0000       /* Subclass */
+#define CFRV_RN     0x000000f0       /* Revision Number */
+#define CFRV_SN     0x0000000f       /* Step Number */
+#define BASE_CLASS  0x02000000       /* Indicates Network Controller */
+#define SUB_CLASS   0x00000000       /* Indicates Ethernet Controller */
+#define STEP_NUMBER 0x00000020       /* Increments for future chips */
+#define REV_NUMBER  0x00000003       /* 0x00, 0x01, 0x02, 0x03: Rev in Step */
+#define CFRV_MASK   0xffff0000       /* Register mask */
+
+/*
+** PCI Configuration Latency Timer Register (PCI_CFLT)
+*/
+#define CFLT_BC     0x0000ff00       /* Latency Timer bits */
+
+/*
+** PCI Configuration Base I/O Address Register (PCI_CBIO)
+*/
+#define CBIO_MASK   -128             /* Base I/O Address Mask */
+#define CBIO_IOSI   0x00000001       /* I/O Space Indicator (RO, value is 1) */
+
+/*
+** PCI Configuration Card Information Structure Register (PCI_CCIS)
+*/
+#define CCIS_ROMI   0xf0000000       /* ROM Image */
+#define CCIS_ASO    0x0ffffff8       /* Address Space Offset */
+#define CCIS_ASI    0x00000007       /* Address Space Indicator */
+
+/*
+** PCI Configuration Subsystem ID Register (PCI_SSID)
+*/
+#define SSID_SSID   0xffff0000       /* Subsystem ID */
+#define SSID_SVID   0x0000ffff       /* Subsystem Vendor ID */
+
+/*
+** PCI Configuration Expansion ROM Base Address Register (PCI_CBER)
+*/
+#define CBER_MASK   0xfffffc00       /* Expansion ROM Base Address Mask */
+#define CBER_ROME   0x00000001       /* ROM Enable */
+
+/*
+** PCI Configuration Interrupt Register (PCI_CFIT)
+*/
+#define CFIT_MXLT   0xff000000       /* MAX_LAT Value (0.25us periods) */
+#define CFIT_MNGT   0x00ff0000       /* MIN_GNT Value (0.25us periods) */
+#define CFIT_IRQP   0x0000ff00       /* Interrupt Pin */
+#define CFIT_IRQL   0x000000ff       /* Interrupt Line */
+
+/*
+** PCI Configuration Power Management Area Register (PCI_CFPM)
+*/
+#define SLEEP       0x80             /* Power Saving Sleep Mode */
+#define SNOOZE      0x40             /* Power Saving Snooze Mode */
+#define WAKEUP      0x00             /* Power Saving Wakeup */
+
+#define PCI_CFDA_DSU 0x41            /* 8 bit Configuration Space Address */
+#define PCI_CFDA_PSM 0x43            /* 8 bit Configuration Space Address */
+
+/*
+** DC21040 Bus Mode Register (DE4X5_BMR)
+*/
+#define BMR_RML    0x00200000       /* [Memory] Read Multiple */
+#define BMR_DBO    0x00100000       /* Descriptor Byte Ordering (Endian) */
+#define BMR_TAP    0x000e0000       /* Transmit Automatic Polling */
+#define BMR_DAS    0x00010000       /* Diagnostic Address Space */
+#define BMR_CAL    0x0000c000       /* Cache Alignment */
+#define BMR_PBL    0x00003f00       /* Programmable Burst Length */
+#define BMR_BLE    0x00000080       /* Big/Little Endian */
+#define BMR_DSL    0x0000007c       /* Descriptor Skip Length */
+#define BMR_BAR    0x00000002       /* Bus ARbitration */
+#define BMR_SWR    0x00000001       /* Software Reset */
+
+                                    /* Timings here are for 10BASE-T/AUI only*/
+#define TAP_NOPOLL 0x00000000       /* No automatic polling */
+#define TAP_200US  0x00020000       /* TX automatic polling every 200us */
+#define TAP_800US  0x00040000       /* TX automatic polling every 800us */
+#define TAP_1_6MS  0x00060000       /* TX automatic polling every 1.6ms */
+#define TAP_12_8US 0x00080000       /* TX automatic polling every 12.8us */
+#define TAP_25_6US 0x000a0000       /* TX automatic polling every 25.6us */
+#define TAP_51_2US 0x000c0000       /* TX automatic polling every 51.2us */
+#define TAP_102_4US 0x000e0000      /* TX automatic polling every 102.4us */
+
+#define CAL_NOUSE  0x00000000       /* Not used */
+#define CAL_8LONG  0x00004000       /* 8-longword alignment */
+#define CAL_16LONG 0x00008000       /* 16-longword alignment */
+#define CAL_32LONG 0x0000c000       /* 32-longword alignment */
+
+#define PBL_0      0x00000000       /*  DMA burst length = amount in RX FIFO */
+#define PBL_1      0x00000100       /*  1 longword  DMA burst length */
+#define PBL_2      0x00000200       /*  2 longwords DMA burst length */
+#define PBL_4      0x00000400       /*  4 longwords DMA burst length */
+#define PBL_8      0x00000800       /*  8 longwords DMA burst length */
+#define PBL_16     0x00001000       /* 16 longwords DMA burst length */
+#define PBL_32     0x00002000       /* 32 longwords DMA burst length */
+
+#define DSL_0      0x00000000       /*  0 longword  / descriptor */
+#define DSL_1      0x00000004       /*  1 longword  / descriptor */
+#define DSL_2      0x00000008       /*  2 longwords / descriptor */
+#define DSL_4      0x00000010       /*  4 longwords / descriptor */
+#define DSL_8      0x00000020       /*  8 longwords / descriptor */
+#define DSL_16     0x00000040       /* 16 longwords / descriptor */
+#define DSL_32     0x00000080       /* 32 longwords / descriptor */
+
+/*
+** DC21040 Transmit Poll Demand Register (DE4X5_TPD)
+*/
+#define TPD        0x00000001       /* Transmit Poll Demand */
+
+/*
+** DC21040 Receive Poll Demand Register (DE4X5_RPD)
+*/
+#define RPD        0x00000001       /* Receive Poll Demand */
+
+/*
+** DC21040 Receive Ring Base Address Register (DE4X5_RRBA)
+*/
+#define RRBA       0xfffffffc       /* RX Descriptor List Start Address */
+
+/*
+** DC21040 Transmit Ring Base Address Register (DE4X5_TRBA)
+*/
+#define TRBA       0xfffffffc       /* TX Descriptor List Start Address */
+
+/*
+** Status Register (DE4X5_STS)
+*/
+#define STS_GPI    0x04000000       /* General Purpose Port Interrupt */
+#define STS_BE     0x03800000       /* Bus Error Bits */
+#define STS_TS     0x00700000       /* Transmit Process State */
+#define STS_RS     0x000e0000       /* Receive Process State */
+#define STS_NIS    0x00010000       /* Normal Interrupt Summary */
+#define STS_AIS    0x00008000       /* Abnormal Interrupt Summary */
+#define STS_ER     0x00004000       /* Early Receive */
+#define STS_FBE    0x00002000       /* Fatal Bus Error */
+#define STS_SE     0x00002000       /* System Error */
+#define STS_LNF    0x00001000       /* Link Fail */
+#define STS_FD     0x00000800       /* Full-Duplex Short Frame Received */
+#define STS_TM     0x00000800       /* Timer Expired (DC21041) */
+#define STS_ETI    0x00000400       /* Early Transmit Interrupt */
+#define STS_AT     0x00000400       /* AUI/TP Pin */
+#define STS_RWT    0x00000200       /* Receive Watchdog Time-Out */
+#define STS_RPS    0x00000100       /* Receive Process Stopped */
+#define STS_RU     0x00000080       /* Receive Buffer Unavailable */
+#define STS_RI     0x00000040       /* Receive Interrupt */
+#define STS_UNF    0x00000020       /* Transmit Underflow */
+#define STS_LNP    0x00000010       /* Link Pass */
+#define STS_ANC    0x00000010       /* Autonegotiation Complete */
+#define STS_TJT    0x00000008       /* Transmit Jabber Time-Out */
+#define STS_TU     0x00000004       /* Transmit Buffer Unavailable */
+#define STS_TPS    0x00000002       /* Transmit Process Stopped */
+#define STS_TI     0x00000001       /* Transmit Interrupt */
+
+#define EB_PAR     0x00000000       /* Parity Error */
+#define EB_MA      0x00800000       /* Master Abort */
+#define EB_TA      0x01000000       /* Target Abort */
+#define EB_RES0    0x01800000       /* Reserved */
+#define EB_RES1    0x02000000       /* Reserved */
+
+#define TS_STOP    0x00000000       /* Stopped */
+#define TS_FTD     0x00100000       /* Fetch Transmit Descriptor */
+#define TS_WEOT    0x00200000       /* Wait for End Of Transmission */
+#define TS_QDAT    0x00300000       /* Queue skb data into TX FIFO */
+#define TS_RES     0x00400000       /* Reserved */
+#define TS_SPKT    0x00500000       /* Setup Packet */
+#define TS_SUSP    0x00600000       /* Suspended */
+#define TS_CLTD    0x00700000       /* Close Transmit Descriptor */
+
+#define RS_STOP    0x00000000       /* Stopped */
+#define RS_FRD     0x00020000       /* Fetch Receive Descriptor */
+#define RS_CEOR    0x00040000       /* Check for End of Receive Packet */
+#define RS_WFRP    0x00060000       /* Wait for Receive Packet */
+#define RS_SUSP    0x00080000       /* Suspended */
+#define RS_CLRD    0x000a0000       /* Close Receive Descriptor */
+#define RS_FLUSH   0x000c0000       /* Flush RX FIFO */
+#define RS_QRFS    0x000e0000       /* Queue RX FIFO into RX Skb */
+
+#define INT_CANCEL 0x0001ffff       /* For zeroing all interrupt sources */
+
+/*
+** Operation Mode Register (DE4X5_OMR)
+*/
+#define OMR_SC     0x80000000       /* Special Capture Effect Enable */
+#define OMR_RA     0x40000000       /* Receive All */
+#define OMR_SDP    0x02000000       /* SD Polarity - MUST BE ASSERTED */
+#define OMR_SCR    0x01000000       /* Scrambler Mode */
+#define OMR_PCS    0x00800000       /* PCS Function */
+#define OMR_TTM    0x00400000       /* Transmit Threshold Mode */
+#define OMR_SF     0x00200000       /* Store and Forward */
+#define OMR_HBD    0x00080000       /* HeartBeat Disable */
+#define OMR_PS     0x00040000       /* Port Select */
+#define OMR_CA     0x00020000       /* Capture Effect Enable */
+#define OMR_BP     0x00010000       /* Back Pressure */
+#define OMR_TR     0x0000c000       /* Threshold Control Bits */
+#define OMR_ST     0x00002000       /* Start/Stop Transmission Command */
+#define OMR_FC     0x00001000       /* Force Collision Mode */
+#define OMR_OM     0x00000c00       /* Operating Mode */
+#define OMR_FDX    0x00000200       /* Full Duplex Mode */
+#define OMR_FKD    0x00000100       /* Flaky Oscillator Disable */
+#define OMR_PM     0x00000080       /* Pass All Multicast */
+#define OMR_PR     0x00000040       /* Promiscuous Mode */
+#define OMR_SB     0x00000020       /* Start/Stop Backoff Counter */
+#define OMR_IF     0x00000010       /* Inverse Filtering */
+#define OMR_PB     0x00000008       /* Pass Bad Frames */
+#define OMR_HO     0x00000004       /* Hash Only Filtering Mode */
+#define OMR_SR     0x00000002       /* Start/Stop Receive */
+#define OMR_HP     0x00000001       /* Hash/Perfect Receive Filtering Mode */
+
+#define TR_72      0x00000000       /* Threshold set to 72 (128) bytes */
+#define TR_96      0x00004000       /* Threshold set to 96 (256) bytes */
+#define TR_128     0x00008000       /* Threshold set to 128 (512) bytes */
+#define TR_160     0x0000c000       /* Threshold set to 160 (1024) bytes */
+
+#define OMR_DEF     (OMR_SDP)
+#define OMR_SIA     (OMR_SDP | OMR_TTM)
+#define OMR_SYM     (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS)
+#define OMR_MII_10  (OMR_SDP | OMR_TTM | OMR_PS)
+#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS)
+
+/*
+** DC21040 Interrupt Mask Register (DE4X5_IMR)
+*/
+#define IMR_GPM    0x04000000       /* General Purpose Port Mask */
+#define IMR_NIM    0x00010000       /* Normal Interrupt Summary Mask */
+#define IMR_AIM    0x00008000       /* Abnormal Interrupt Summary Mask */
+#define IMR_ERM    0x00004000       /* Early Receive Mask */
+#define IMR_FBM    0x00002000       /* Fatal Bus Error Mask */
+#define IMR_SEM    0x00002000       /* System Error Mask */
+#define IMR_LFM    0x00001000       /* Link Fail Mask */
+#define IMR_FDM    0x00000800       /* Full-Duplex (Short Frame) Mask */
+#define IMR_TMM    0x00000800       /* Timer Expired Mask (DC21041) */
+#define IMR_ETM    0x00000400       /* Early Transmit Interrupt Mask */
+#define IMR_ATM    0x00000400       /* AUI/TP Switch Mask */
+#define IMR_RWM    0x00000200       /* Receive Watchdog Time-Out Mask */
+#define IMR_RSM    0x00000100       /* Receive Stopped Mask */
+#define IMR_RUM    0x00000080       /* Receive Buffer Unavailable Mask */
+#define IMR_RIM    0x00000040       /* Receive Interrupt Mask */
+#define IMR_UNM    0x00000020       /* Underflow Interrupt Mask */
+#define IMR_ANM    0x00000010       /* Autonegotiation Complete Mask */
+#define IMR_LPM    0x00000010       /* Link Pass */
+#define IMR_TJM    0x00000008       /* Transmit Time-Out Jabber Mask */
+#define IMR_TUM    0x00000004       /* Transmit Buffer Unavailable Mask */
+#define IMR_TSM    0x00000002       /* Transmission Stopped Mask */
+#define IMR_TIM    0x00000001       /* Transmit Interrupt Mask */
+
+/*
+** Missed Frames and FIFO Overflow Counters (DE4X5_MFC)
+*/
+#define MFC_FOCO   0x10000000       /* FIFO Overflow Counter Overflow Bit */
+#define MFC_FOC    0x0ffe0000       /* FIFO Overflow Counter Bits */
+#define MFC_OVFL   0x00010000       /* Missed Frames Counter Overflow Bit */
+#define MFC_CNTR   0x0000ffff       /* Missed Frames Counter Bits */
+#define MFC_FOCM   0x1ffe0000       /* FIFO Overflow Counter Mask */
+
+/*
+** DC21040 Ethernet Address PROM (DE4X5_APROM)
+*/
+#define APROM_DN   0x80000000       /* Data Not Valid */
+#define APROM_DT   0x000000ff       /* Address Byte */
+
+/*
+** DC21041 Boot/Ethernet Address ROM (DE4X5_BROM)
+*/
+#define BROM_MODE 0x00008000       /* MODE_1: 0,  MODE_0: 1  (read only) */
+#define BROM_RD   0x00004000       /* Read from Boot ROM */
+#define BROM_WR   0x00002000       /* Write to Boot ROM */
+#define BROM_BR   0x00001000       /* Select Boot ROM when set */
+#define BROM_SR   0x00000800       /* Select Serial ROM when set */
+#define BROM_REG  0x00000400       /* External Register Select */
+#define BROM_DT   0x000000ff       /* Data Byte */
+
+/*
+** DC21041 Serial/Ethernet Address ROM (DE4X5_SROM, DE4X5_MII)
+*/
+#define MII_MDI   0x00080000       /* MII Management Data In */
+#define MII_MDO   0x00060000       /* MII Management Mode/Data Out */
+#define MII_MRD   0x00040000       /* MII Management Define Read Mode */
+#define MII_MWR   0x00000000       /* MII Management Define Write Mode */
+#define MII_MDT   0x00020000       /* MII Management Data Out */
+#define MII_MDC   0x00010000       /* MII Management Clock */
+#define MII_RD    0x00004000       /* Read from MII */
+#define MII_WR    0x00002000       /* Write to MII */
+#define MII_SEL   0x00000800       /* Select MII when RESET */
+
+#define SROM_MODE 0x00008000       /* MODE_1: 0,  MODE_0: 1  (read only) */
+#define SROM_RD   0x00004000       /* Read from Boot ROM */
+#define SROM_WR   0x00002000       /* Write to Boot ROM */
+#define SROM_BR   0x00001000       /* Select Boot ROM when set */
+#define SROM_SR   0x00000800       /* Select Serial ROM when set */
+#define SROM_REG  0x00000400       /* External Register Select */
+#define SROM_DT   0x000000ff       /* Data Byte */
+
+#define DT_OUT    0x00000008       /* Serial Data Out */
+#define DT_IN     0x00000004       /* Serial Data In */
+#define DT_CLK    0x00000002       /* Serial ROM Clock */
+#define DT_CS     0x00000001       /* Serial ROM Chip Select */
+
+#define MII_PREAMBLE 0xffffffff    /* MII Management Preamble */
+#define MII_TEST     0xaaaaaaaa    /* MII Test Signal */
+#define MII_STRD     0x06          /* Start of Frame+Op Code: use low nibble */
+#define MII_STWR     0x0a          /* Start of Frame+Op Code: use low nibble */
+
+#define MII_CR       0x00          /* MII Management Control Register */
+#define MII_SR       0x01          /* MII Management Status Register */
+#define MII_ID0      0x02          /* PHY Identifier Register 0 */
+#define MII_ID1      0x03          /* PHY Identifier Register 1 */
+#define MII_ANA      0x04          /* Auto Negotiation Advertisement */
+#define MII_ANLPA    0x05          /* Auto Negotiation Link Partner Ability */
+#define MII_ANE      0x06          /* Auto Negotiation Expansion */
+#define MII_ANP      0x07          /* Auto Negotiation Next Page TX */
+
+#define DE4X5_MAX_MII 32           /* Maximum address of MII PHY devices */
+
+/*
+** MII Management Control Register
+*/
+#define MII_CR_RST  0x8000         /* RESET the PHY chip */
+#define MII_CR_LPBK 0x4000         /* Loopback enable */
+#define MII_CR_SPD  0x2000         /* 0: 10Mb/s; 1: 100Mb/s */
+#define MII_CR_10   0x0000         /* Set 10Mb/s */
+#define MII_CR_100  0x2000         /* Set 100Mb/s */
+#define MII_CR_ASSE 0x1000         /* Auto Speed Select Enable */
+#define MII_CR_PD   0x0800         /* Power Down */
+#define MII_CR_ISOL 0x0400         /* Isolate Mode */
+#define MII_CR_RAN  0x0200         /* Restart Auto Negotiation */
+#define MII_CR_FDM  0x0100         /* Full Duplex Mode */
+#define MII_CR_CTE  0x0080         /* Collision Test Enable */
+
+/*
+** MII Management Status Register
+*/
+#define MII_SR_T4C  0x8000         /* 100BASE-T4 capable */
+#define MII_SR_TXFD 0x4000         /* 100BASE-TX Full Duplex capable */
+#define MII_SR_TXHD 0x2000         /* 100BASE-TX Half Duplex capable */
+#define MII_SR_TFD  0x1000         /* 10BASE-T Full Duplex capable */
+#define MII_SR_THD  0x0800         /* 10BASE-T Half Duplex capable */
+#define MII_SR_ASSC 0x0020         /* Auto Speed Selection Complete*/
+#define MII_SR_RFD  0x0010         /* Remote Fault Detected */
+#define MII_SR_ANC  0x0008         /* Auto Negotiation capable */
+#define MII_SR_LKS  0x0004         /* Link Status */
+#define MII_SR_JABD 0x0002         /* Jabber Detect */
+#define MII_SR_XC   0x0001         /* Extended Capabilities */
+
+/*
+** MII Management Auto Negotiation Advertisement Register
+*/
+#define MII_ANA_TAF  0x03e0        /* Technology Ability Field */
+#define MII_ANA_T4AM 0x0200        /* T4 Technology Ability Mask */
+#define MII_ANA_TXAM 0x0180        /* TX Technology Ability Mask */
+#define MII_ANA_FDAM 0x0140        /* Full Duplex Technology Ability Mask */
+#define MII_ANA_HDAM 0x02a0        /* Half Duplex Technology Ability Mask */
+#define MII_ANA_100M 0x0380        /* 100Mb Technology Ability Mask */
+#define MII_ANA_10M  0x0060        /* 10Mb Technology Ability Mask */
+#define MII_ANA_CSMA 0x0001        /* CSMA-CD Capable */
+
+/*
+** MII Management Auto Negotiation Remote End Register
+*/
+#define MII_ANLPA_NP   0x8000      /* Next Page (Enable) */
+#define MII_ANLPA_ACK  0x4000      /* Remote Acknowledge */
+#define MII_ANLPA_RF   0x2000      /* Remote Fault */
+#define MII_ANLPA_TAF  0x03e0      /* Technology Ability Field */
+#define MII_ANLPA_T4AM 0x0200      /* T4 Technology Ability Mask */
+#define MII_ANLPA_TXAM 0x0180      /* TX Technology Ability Mask */
+#define MII_ANLPA_FDAM 0x0140      /* Full Duplex Technology Ability Mask */
+#define MII_ANLPA_HDAM 0x02a0      /* Half Duplex Technology Ability Mask */
+#define MII_ANLPA_100M 0x0380      /* 100Mb Technology Ability Mask */
+#define MII_ANLPA_10M  0x0060      /* 10Mb Technology Ability Mask */
+#define MII_ANLPA_CSMA 0x0001      /* CSMA-CD Capable */
+
+/*
+** SROM Media Definitions (ABG SROM Section)
+*/
+#define MEDIA_NWAY     0x0080      /* Nway (Auto Negotiation) on PHY */
+#define MEDIA_MII      0x0040      /* MII Present on the adapter */
+#define MEDIA_FIBRE    0x0008      /* Fibre Media present */
+#define MEDIA_AUI      0x0004      /* AUI Media present */
+#define MEDIA_TP       0x0002      /* TP Media present */
+#define MEDIA_BNC      0x0001      /* BNC Media present */
+
+/*
+** SROM Definitions (Digital Semiconductor Format)
+*/
+#define SROM_SSVID     0x0000      /* Sub-system Vendor ID offset */
+#define SROM_SSID      0x0002      /* Sub-system ID offset */
+#define SROM_CISPL     0x0004      /* CardBus CIS Pointer low offset */
+#define SROM_CISPH     0x0006      /* CardBus CIS Pointer high offset */
+#define SROM_IDCRC     0x0010      /* ID Block CRC offset*/
+#define SROM_RSVD2     0x0011      /* ID Reserved 2 offset */
+#define SROM_SFV       0x0012      /* SROM Format Version offset */
+#define SROM_CCNT      0x0013      /* Controller Count offset */
+#define SROM_HWADD     0x0014      /* Hardware Address offset */
+#define SROM_MRSVD     0x007c      /* Manufacturer Reserved offset*/
+#define SROM_CRC       0x007e      /* SROM CRC offset */
+
+/*
+** SROM Media Connection Definitions
+*/
+#define SROM_10BT      0x0000      /*  10BASE-T half duplex */
+#define SROM_10BTN     0x0100      /*  10BASE-T with Nway */
+#define SROM_10BTF     0x0204      /*  10BASE-T full duplex */
+#define SROM_10BTNLP   0x0400      /*  10BASE-T without Link Pass test */
+#define SROM_10B2      0x0001      /*  10BASE-2 (BNC) */
+#define SROM_10B5      0x0002      /*  10BASE-5 (AUI) */
+#define SROM_100BTH    0x0003      /*  100BASE-T half duplex */
+#define SROM_100BTF    0x0205      /*  100BASE-T full duplex */
+#define SROM_100BT4    0x0006      /*  100BASE-T4 */
+#define SROM_100BFX    0x0007      /*  100BASE-FX half duplex (Fiber) */
+#define SROM_M10BT     0x0009      /*  MII 10BASE-T half duplex */
+#define SROM_M10BTF    0x020a      /*  MII 10BASE-T full duplex */
+#define SROM_M100BT    0x000d      /*  MII 100BASE-T half duplex */
+#define SROM_M100BTF   0x020e      /*  MII 100BASE-T full duplex */
+#define SROM_M100BT4   0x000f      /*  MII 100BASE-T4 */
+#define SROM_M100BF    0x0010      /*  MII 100BASE-FX half duplex */
+#define SROM_M100BFF   0x0211      /*  MII 100BASE-FX full duplex */
+#define SROM_PDA       0x0800      /*  Powerup & Dynamic Autosense */
+#define SROM_PAO       0x8800      /*  Powerup Autosense Only */
+#define SROM_NSMI      0xffff      /*  No Selected Media Information */
+
+/*
+** SROM Media Definitions
+*/
+#define SROM_10BASET   0x0000      /*  10BASE-T half duplex */
+#define SROM_10BASE2   0x0001      /*  10BASE-2 (BNC) */
+#define SROM_10BASE5   0x0002      /*  10BASE-5 (AUI) */
+#define SROM_100BASET  0x0003      /*  100BASE-T half duplex */
+#define SROM_10BASETF  0x0004      /*  10BASE-T full duplex */
+#define SROM_100BASETF 0x0005      /*  100BASE-T full duplex */
+#define SROM_100BASET4 0x0006      /*  100BASE-T4 */
+#define SROM_100BASEF  0x0007      /*  100BASE-FX half duplex */
+#define SROM_100BASEFF 0x0008      /*  100BASE-FX full duplex */
+
+#define BLOCK_LEN      0x7f        /* Extended blocks length mask */
+#define EXT_FIELD      0x40        /* Extended blocks extension field bit */
+#define MEDIA_CODE     0x3f        /* Extended blocks media code mask */
+
+/*
+** SROM Compact Format Block Masks
+*/
+#define COMPACT_FI      0x80       /* Format Indicator */
+#define COMPACT_LEN     0x04       /* Length */
+#define COMPACT_MC      0x3f       /* Media Code */
+
+/*
+** SROM Extended Format Block Type 0 Masks
+*/
+#define BLOCK0_FI      0x80        /* Format Indicator */
+#define BLOCK0_MCS     0x80        /* Media Code byte Sign */
+#define BLOCK0_MC      0x3f        /* Media Code */
+
+/*
+** DC21040 Full Duplex Register (DE4X5_FDR)
+*/
+#define FDR_FDACV  0x0000ffff      /* Full Duplex Auto Configuration Value */
+
+/*
+** DC21041 General Purpose Timer Register (DE4X5_GPT)
+*/
+#define GPT_CON  0x00010000        /* One shot: 0,  Continuous: 1 */
+#define GPT_VAL  0x0000ffff        /* Timer Value */
+
+/*
+** DC21140 General Purpose Register (DE4X5_GEP) (hardware dependent bits)
+*/
+/* Valid ONLY for DE500 hardware */
+#define GEP_LNP  0x00000080        /* Link Pass               (input)        */
+#define GEP_SLNK 0x00000040        /* SYM LINK                (input)        */
+#define GEP_SDET 0x00000020        /* Signal Detect           (input)        */
+#define GEP_HRST 0x00000010        /* Hard RESET (to PHY)     (output)       */
+#define GEP_FDXD 0x00000008        /* Full Duplex Disable     (output)       */
+#define GEP_PHYL 0x00000004        /* PHY Loopback            (output)       */
+#define GEP_FLED 0x00000002        /* Force Activity LED on   (output)       */
+#define GEP_MODE 0x00000001        /* 0: 10Mb/s,  1: 100Mb/s                 */
+#define GEP_INIT 0x0000011f        /* Setup inputs (0) and outputs (1)       */
+#define GEP_CTRL 0x00000100        /* GEP control bit                        */
+
+/*
+** SIA Register Defaults
+*/
+#define CSR13 0x00000001
+#define CSR14 0x0003ff7f           /* Autonegotiation disabled               */
+#define CSR15 0x00000008
+
+/*
+** SIA Status Register (DE4X5_SISR)
+*/
+#define SISR_LPC   0xffff0000      /* Link Partner's Code Word               */
+#define SISR_LPN   0x00008000      /* Link Partner Negotiable                */
+#define SISR_ANS   0x00007000      /* Auto Negotiation Arbitration State     */
+#define SISR_NSN   0x00000800      /* Non Stable NLPs Detected (DC21041)     */
+#define SISR_TRF   0x00000800      /* Transmit Remote Fault                  */
+#define SISR_NSND  0x00000400      /* Non Stable NLPs Detected (DC21142)     */
+#define SISR_ANR_FDS 0x00000400    /* Auto Negotiate Restart/Full Duplex Sel.*/
+#define SISR_TRA   0x00000200      /* 10BASE-T Receive Port Activity         */
+#define SISR_NRA   0x00000200      /* Non Selected Port Receive Activity     */
+#define SISR_ARA   0x00000100      /* AUI Receive Port Activity              */
+#define SISR_SRA   0x00000100      /* Selected Port Receive Activity         */
+#define SISR_DAO   0x00000080      /* PLL All One                            */
+#define SISR_DAZ   0x00000040      /* PLL All Zero                           */
+#define SISR_DSP   0x00000020      /* PLL Self-Test Pass                     */
+#define SISR_DSD   0x00000010      /* PLL Self-Test Done                     */
+#define SISR_APS   0x00000008      /* Auto Polarity State                    */
+#define SISR_LKF   0x00000004      /* Link Fail Status                       */
+#define SISR_LS10  0x00000004      /* 10Mb/s Link Fail Status                */
+#define SISR_NCR   0x00000002      /* Network Connection Error               */
+#define SISR_LS100 0x00000002      /* 100Mb/s Link Fail Status               */
+#define SISR_PAUI  0x00000001      /* AUI_TP Indication                      */
+#define SISR_MRA   0x00000001      /* MII Receive Port Activity              */
+
+#define ANS_NDIS   0x00000000      /* Nway disable                           */
+#define ANS_TDIS   0x00001000      /* Transmit Disable                       */
+#define ANS_ADET   0x00002000      /* Ability Detect                         */
+#define ANS_ACK    0x00003000      /* Acknowledge                            */
+#define ANS_CACK   0x00004000      /* Complete Acknowledge                   */
+#define ANS_NWOK   0x00005000      /* Nway OK - FLP Link Good                */
+#define ANS_LCHK   0x00006000      /* Link Check                             */
+
+#define SISR_RST   0x00000301      /* CSR12 reset                            */
+#define SISR_ANR   0x00001301      /* Autonegotiation restart                */
+
+/*
+** SIA Connectivity Register (DE4X5_SICR)
+*/
+#define SICR_SDM   0xffff0000       /* SIA Diagnostics Mode */
+#define SICR_OE57  0x00008000       /* Output Enable 5 6 7 */
+#define SICR_OE24  0x00004000       /* Output Enable 2 4 */
+#define SICR_OE13  0x00002000       /* Output Enable 1 3 */
+#define SICR_IE    0x00001000       /* Input Enable */
+#define SICR_EXT   0x00000000       /* SIA MUX Select External SIA Mode */
+#define SICR_D_SIA 0x00000400       /* SIA MUX Select Diagnostics - SIA Sigs */
+#define SICR_DPLL  0x00000800       /* SIA MUX Select Diagnostics - DPLL Sigs*/
+#define SICR_APLL  0x00000a00       /* SIA MUX Select Diagnostics - DPLL Sigs*/
+#define SICR_D_RxM 0x00000c00       /* SIA MUX Select Diagnostics - RxM Sigs */
+#define SICR_M_RxM 0x00000d00       /* SIA MUX Select Diagnostics - RxM Sigs */
+#define SICR_LNKT  0x00000e00       /* SIA MUX Select Diagnostics - Link Test*/
+#define SICR_SEL   0x00000f00       /* SIA MUX Select AUI or TP with LEDs */
+#define SICR_ASE   0x00000080       /* APLL Start Enable*/
+#define SICR_SIM   0x00000040       /* Serial Interface Input Multiplexer */
+#define SICR_ENI   0x00000020       /* Encoder Input Multiplexer */
+#define SICR_EDP   0x00000010       /* SIA PLL External Input Enable */
+#define SICR_AUI   0x00000008       /* 10Base-T (0) or AUI (1) */
+#define SICR_CAC   0x00000004       /* CSR Auto Configuration */
+#define SICR_PS    0x00000002       /* Pin AUI/TP Selection */
+#define SICR_SRL   0x00000001       /* SIA Reset */
+#define SIA_RESET  0x00000000       /* SIA Reset Value */
+
+/*
+** SIA Transmit and Receive Register (DE4X5_STRR)
+*/
+#define STRR_TAS   0x00008000       /* 10Base-T/AUI Autosensing Enable */
+#define STRR_SPP   0x00004000       /* Set Polarity Plus */
+#define STRR_APE   0x00002000       /* Auto Polarity Enable */
+#define STRR_LTE   0x00001000       /* Link Test Enable */
+#define STRR_SQE   0x00000800       /* Signal Quality Enable */
+#define STRR_CLD   0x00000400       /* Collision Detect Enable */
+#define STRR_CSQ   0x00000200       /* Collision Squelch Enable */
+#define STRR_RSQ   0x00000100       /* Receive Squelch Enable */
+#define STRR_ANE   0x00000080       /* Auto Negotiate Enable */
+#define STRR_HDE   0x00000040       /* Half Duplex Enable */
+#define STRR_CPEN  0x00000030       /* Compensation Enable */
+#define STRR_LSE   0x00000008       /* Link Pulse Send Enable */
+#define STRR_DREN  0x00000004       /* Driver Enable */
+#define STRR_LBK   0x00000002       /* Loopback Enable */
+#define STRR_ECEN  0x00000001       /* Encoder Enable */
+#define STRR_RESET 0xffffffff       /* Reset value for STRR */
+
+/*
+** SIA General Register (DE4X5_SIGR)
+*/
+#define SIGR_RMI   0x40000000       /* Receive Match Interrupt */
+#define SIGR_GI1   0x20000000       /* General Port Interrupt 1 */
+#define SIGR_GI0   0x10000000       /* General Port Interrupt 0 */
+#define SIGR_CWE   0x08000000       /* Control Write Enable */
+#define SIGR_RME   0x04000000       /* Receive Match Enable */
+#define SIGR_GEI1  0x02000000       /* GEP Interrupt Enable on Port 1 */
+#define SIGR_GEI0  0x01000000       /* GEP Interrupt Enable on Port 0 */
+#define SIGR_LGS3  0x00800000       /* LED/GEP3 Select */
+#define SIGR_LGS2  0x00400000       /* LED/GEP2 Select */
+#define SIGR_LGS1  0x00200000       /* LED/GEP1 Select */
+#define SIGR_LGS0  0x00100000       /* LED/GEP0 Select */
+#define SIGR_MD    0x000f0000       /* General Purpose Mode and Data */
+#define SIGR_LV2   0x00008000       /* General Purpose LED2 value */
+#define SIGR_LE2   0x00004000       /* General Purpose LED2 enable */
+#define SIGR_FRL   0x00002000       /* Force Receiver Low */
+#define SIGR_DPST  0x00001000       /* PLL Self Test Start */
+#define SIGR_LSD   0x00000800       /* LED Stretch Disable */
+#define SIGR_FLF   0x00000400       /* Force Link Fail */
+#define SIGR_FUSQ  0x00000200       /* Force Unsquelch */
+#define SIGR_TSCK  0x00000100       /* Test Clock */
+#define SIGR_LV1   0x00000080       /* General Purpose LED1 value */
+#define SIGR_LE1   0x00000040       /* General Purpose LED1 enable */
+#define SIGR_RWR   0x00000020       /* Receive Watchdog Release */
+#define SIGR_RWD   0x00000010       /* Receive Watchdog Disable */
+#define SIGR_ABM   0x00000008       /* BNC: 0,  AUI:1 */
+#define SIGR_JCK   0x00000004       /* Jabber Clock */
+#define SIGR_HUJ   0x00000002       /* Host Unjab */
+#define SIGR_JBD   0x00000001       /* Jabber Disable */
+#define SIGR_RESET 0xffff0000       /* Reset value for SIGR */
+
+/*
+** Receive Descriptor Bit Summary
+*/
+#define R_OWN      0x80000000       /* Own Bit */
+#define RD_FF      0x40000000       /* Filtering Fail */
+#define RD_FL      0x3fff0000       /* Frame Length */
+#define RD_ES      0x00008000       /* Error Summary */
+#define RD_LE      0x00004000       /* Length Error */
+#define RD_DT      0x00003000       /* Data Type */
+#define RD_RF      0x00000800       /* Runt Frame */
+#define RD_MF      0x00000400       /* Multicast Frame */
+#define RD_FS      0x00000200       /* First Descriptor */
+#define RD_LS      0x00000100       /* Last Descriptor */
+#define RD_TL      0x00000080       /* Frame Too Long */
+#define RD_CS      0x00000040       /* Collision Seen */
+#define RD_FT      0x00000020       /* Frame Type */
+#define RD_RJ      0x00000010       /* Receive Watchdog */
+#define RD_RE      0x00000008       /* Report on MII Error */
+#define RD_DB      0x00000004       /* Dribbling Bit */
+#define RD_CE      0x00000002       /* CRC Error */
+#define RD_OF      0x00000001       /* Overflow */
+
+#define RD_RER     0x02000000       /* Receive End Of Ring */
+#define RD_RCH     0x01000000       /* Second Address Chained */
+#define RD_RBS2    0x003ff800       /* Buffer 2 Size */
+#define RD_RBS1    0x000007ff       /* Buffer 1 Size */
+
+/*
+** Transmit Descriptor Bit Summary
+*/
+#define T_OWN      0x80000000       /* Own Bit */
+#define TD_ES      0x00008000       /* Error Summary */
+#define TD_TO      0x00004000       /* Transmit Jabber Time-Out */
+#define TD_LO      0x00000800       /* Loss Of Carrier */
+#define TD_NC      0x00000400       /* No Carrier */
+#define TD_LC      0x00000200       /* Late Collision */
+#define TD_EC      0x00000100       /* Excessive Collisions */
+#define TD_HF      0x00000080       /* Heartbeat Fail */
+#define TD_CC      0x00000078       /* Collision Counter */
+#define TD_LF      0x00000004       /* Link Fail */
+#define TD_UF      0x00000002       /* Underflow Error */
+#define TD_DE      0x00000001       /* Deferred */
+
+#define TD_IC      0x80000000       /* Interrupt On Completion */
+#define TD_LS      0x40000000       /* Last Segment */
+#define TD_FS      0x20000000       /* First Segment */
+#define TD_FT1     0x10000000       /* Filtering Type */
+#define TD_SET     0x08000000       /* Setup Packet */
+#define TD_AC      0x04000000       /* Add CRC Disable */
+#define TD_TER     0x02000000       /* Transmit End Of Ring */
+#define TD_TCH     0x01000000       /* Second Address Chained */
+#define TD_DPD     0x00800000       /* Disabled Padding */
+#define TD_FT0     0x00400000       /* Filtering Type */
+#define TD_TBS2    0x003ff800       /* Buffer 2 Size */
+#define TD_TBS1    0x000007ff       /* Buffer 1 Size */
+
+#define PERFECT_F  0x00000000
+#define HASH_F     TD_FT0
+#define INVERSE_F  TD_FT1
+#define HASH_O_F   (TD_FT1 | TD_F0)
+
+/*
+** Media / mode state machine definitions
+** User selectable:
+*/
+#define TP              0x0040     /* 10Base-T (now equiv to _10Mb)        */
+#define TP_NW           0x0002     /* 10Base-T with Nway                   */
+#define BNC             0x0004     /* Thinwire                             */
+#define AUI             0x0008     /* Thickwire                            */
+#define BNC_AUI         0x0010     /* BNC/AUI on DC21040 indistinguishable */
+#define _10Mb           0x0040     /* 10Mb/s Ethernet                      */
+#define _100Mb          0x0080     /* 100Mb/s Ethernet                     */
+#define AUTO            0x4000     /* Auto sense the media or speed        */
+
+/*
+** Internal states
+*/
+#define NC              0x0000     /* No Connection                        */
+#define ANS             0x0020     /* Intermediate AutoNegotiation State   */
+#define SPD_DET         0x0100     /* Parallel speed detection             */
+#define INIT            0x0200     /* Initial state                        */
+#define EXT_SIA         0x0400     /* External SIA for motherboard chip    */
+#define ANS_SUSPECT     0x0802     /* Suspect the ANS (TP) port is down    */
+#define TP_SUSPECT      0x0803     /* Suspect the TP port is down          */
+#define BNC_AUI_SUSPECT 0x0804     /* Suspect the BNC or AUI port is down  */
+#define EXT_SIA_SUSPECT 0x0805     /* Suspect the EXT SIA port is down     */
+#define BNC_SUSPECT     0x0806     /* Suspect the BNC port is down         */
+#define AUI_SUSPECT     0x0807     /* Suspect the AUI port is down         */
+#define MII             0x1000     /* MII on the 21143                     */
+
+#define TIMER_CB        0x80000000 /* Timer callback detection             */
+
+/*
+** DE4X5 DEBUG Options
+*/
+#define DEBUG_NONE      0x0000     /* No DEBUG messages */
+#define DEBUG_VERSION   0x0001     /* Print version message */
+#define DEBUG_MEDIA     0x0002     /* Print media messages */
+#define DEBUG_TX        0x0004     /* Print TX (queue_pkt) messages */
+#define DEBUG_RX        0x0008     /* Print RX (de4x5_rx) messages */
+#define DEBUG_SROM      0x0010     /* Print SROM messages */
+#define DEBUG_MII       0x0020     /* Print MII messages */
+#define DEBUG_OPEN      0x0040     /* Print de4x5_open() messages */
+#define DEBUG_CLOSE     0x0080     /* Print de4x5_close() messages */
+#define DEBUG_PCICFG    0x0100
+#define DEBUG_ALL       0x01ff
+
+/*
+** Miscellaneous
+*/
+#define PCI  0
+#define EISA 1
+
+#define HASH_TABLE_LEN   512       /* Bits */
+#define HASH_BITS        0x01ff    /* 9 LS bits */
+
+#define SETUP_FRAME_LEN  192       /* Bytes */
+#define IMPERF_PA_OFFSET 156       /* Bytes */
+
+#define POLL_DEMAND          1
+
+#define LOST_MEDIA_THRESHOLD 3
+
+#define MASK_INTERRUPTS      1
+#define UNMASK_INTERRUPTS    0
+
+#define DE4X5_STRLEN         8
+
+#define DE4X5_INIT           0     /* Initialisation time */
+#define DE4X5_RUN            1     /* Run time */
+
+#define DE4X5_SAVE_STATE     0
+#define DE4X5_RESTORE_STATE  1
+
+/*
+** Address Filtering Modes
+*/
+#define PERFECT              0     /* 16 perfect physical addresses */
+#define HASH_PERF            1     /* 1 perfect, 512 multicast addresses */
+#define PERFECT_REJ          2     /* Reject 16 perfect physical addresses */
+#define ALL_HASH             3     /* Hashes all physical & multicast addrs */
+
+#define ALL                  0     /* Clear out all the setup frame */
+#define PHYS_ADDR_ONLY       1     /* Update the physical address only */
+
+/*
+** Adapter state
+*/
+#define INITIALISED          0     /* After h/w initialised and mem alloc'd */
+#define CLOSED               1     /* Ready for opening */
+#define OPEN                 2     /* Running */
+
+/*
+** Various wait times
+*/
+#define PDET_LINK_WAIT    1200    /* msecs to wait for link detect bits     */
+#define ANS_FINISH_WAIT   1000    /* msecs to wait for link detect bits     */
+
+/*
+** IEEE OUIs for various PHY vendor/chip combos - Reg 2 values only. Since
+** the vendors seem split 50-50 on how to calculate the OUI register values
+** anyway, just reading Reg2 seems reasonable for now [see de4x5_get_oui()].
+*/
+#define NATIONAL_TX 0x2000
+#define BROADCOM_T4 0x03e0
+#define SEEQ_T4     0x0016
+#define CYPRESS_T4  0x0014
+
+/*
+** Speed Selection stuff
+*/
+#define SET_10Mb {\
+  if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
+    omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
+    if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
+      mii_wr(MII_CR_10|(lp->fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
+    }\
+    omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\
+    outl(omr, DE4X5_OMR);\
+    if (!lp->useSROM) lp->cache.gep = 0;\
+  } else if (lp->useSROM && !lp->useMII) {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\
+  } else {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\
+    lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\
+    gep_wr(lp->cache.gep, dev);\
+  }\
+}
+
+#define SET_100Mb {\
+  if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
+    int fdx=0;\
+    if (lp->phy[lp->active].id == NATIONAL_TX) {\
+        mii_wr(mii_rd(0x18, lp->phy[lp->active].addr, DE4X5_MII) & ~0x2000,\
+                      0x18, lp->phy[lp->active].addr, DE4X5_MII);\
+    }\
+    omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
+    sr = mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);\
+    if (!(sr & MII_ANA_T4AM) && lp->fdx) fdx=1;\
+    if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
+      mii_wr(MII_CR_100|(fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
+    }\
+    if (fdx) omr |= OMR_FDX;\
+    outl(omr, DE4X5_OMR);\
+    if (!lp->useSROM) lp->cache.gep = 0;\
+  } else if (lp->useSROM && !lp->useMII) {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
+  } else {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    omr |= (lp->fdx ? OMR_FDX : 0);\
+    outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
+    lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\
+    gep_wr(lp->cache.gep, dev);\
+  }\
+}
+
+/* FIX ME so I don't jam 10Mb networks */
+#define SET_100Mb_PDET {\
+  if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
+    mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
+    omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    outl(omr, DE4X5_OMR);\
+  } else if (lp->useSROM && !lp->useMII) {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    outl(omr, DE4X5_OMR);\
+  } else {\
+    omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
+    outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\
+    lp->cache.gep = (GEP_FDXD | GEP_MODE);\
+    gep_wr(lp->cache.gep, dev);\
+  }\
+}
+
+/*
+** Include the IOCTL stuff
+*/
+#include <linux/sockios.h>
+
+struct de4x5_ioctl {
+	unsigned short cmd;                /* Command to run */
+	unsigned short len;                /* Length of the data buffer */
+	unsigned char  __user *data;       /* Pointer to the data buffer */
+};
+
+/*
+** Recognised commands for the driver
+*/
+#define DE4X5_GET_HWADDR	0x01 /* Get the hardware address */
+#define DE4X5_SET_HWADDR	0x02 /* Set the hardware address */
+/* 0x03 and 0x04 were used before and are obsoleted now. Don't use them. */
+#define DE4X5_SAY_BOO	        0x05 /* Say "Boo!" to the kernel log file */
+#define DE4X5_GET_MCA   	0x06 /* Get a multicast address */
+#define DE4X5_SET_MCA   	0x07 /* Set a multicast address */
+#define DE4X5_CLR_MCA    	0x08 /* Clear a multicast address */
+#define DE4X5_MCA_EN    	0x09 /* Enable a multicast address group */
+#define DE4X5_GET_STATS  	0x0a /* Get the driver statistics */
+#define DE4X5_CLR_STATS 	0x0b /* Zero out the driver statistics */
+#define DE4X5_GET_OMR           0x0c /* Get the OMR Register contents */
+#define DE4X5_SET_OMR           0x0d /* Set the OMR Register contents */
+#define DE4X5_GET_REG           0x0e /* Get the DE4X5 Registers */
+
+#define MOTO_SROM_BUG    (lp->active == 8 && (get_unaligned_le32(dev->dev_addr) & 0x00ffffff) == 0x3e0008)
diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
new file mode 100644
index 000000000000..17b11ee1745a
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -0,0 +1,2253 @@
+/*
+    A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast
+    ethernet driver for Linux.
+    Copyright (C) 1997  Sten Wang
+
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License
+    as published by the Free Software Foundation; either version 2
+    of the License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    DAVICOM Web-Site: www.davicom.com.tw
+
+    Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw
+    Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu>
+
+    (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
+
+    Marcelo Tosatti <marcelo@conectiva.com.br> :
+    Made it compile in 2.3 (device to net_device)
+
+    Alan Cox <alan@lxorguk.ukuu.org.uk> :
+    Cleaned up for kernel merge.
+    Removed the back compatibility support
+    Reformatted, fixing spelling etc as I went
+    Removed IRQ 0-15 assumption
+
+    Jeff Garzik <jgarzik@pobox.com> :
+    Updated to use new PCI driver API.
+    Resource usage cleanups.
+    Report driver version to user.
+
+    Tobias Ringstrom <tori@unhappy.mine.nu> :
+    Cleaned up and added SMP safety.  Thanks go to Jeff Garzik,
+    Andrew Morton and Frank Davis for the SMP safety fixes.
+
+    Vojtech Pavlik <vojtech@suse.cz> :
+    Cleaned up pointer arithmetics.
+    Fixed a lot of 64bit issues.
+    Cleaned up printk()s a bit.
+    Fixed some obvious big endian problems.
+
+    Tobias Ringstrom <tori@unhappy.mine.nu> :
+    Use time_after for jiffies calculation.  Added ethtool
+    support.  Updated PCI resource allocation.  Do not
+    forget to unmap PCI mapped skbs.
+
+    Alan Cox <alan@lxorguk.ukuu.org.uk>
+    Added new PCI identifiers provided by Clear Zhang at ALi
+    for their 1563 ethernet device.
+
+    TODO
+
+    Check on 64 bit boxes.
+    Check and fix on big endian boxes.
+
+    Test and make sure PCI latency is now correct for all cases.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"dmfe"
+#define DRV_VERSION	"1.36.4"
+#define DRV_RELDATE	"2002-01-17"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_TULIP_DM910X
+#include <linux/of.h>
+#endif
+
+
+/* Board/System/Debug information/definition ---------------- */
+#define PCI_DM9132_ID   0x91321282      /* Davicom DM9132 ID */
+#define PCI_DM9102_ID   0x91021282      /* Davicom DM9102 ID */
+#define PCI_DM9100_ID   0x91001282      /* Davicom DM9100 ID */
+#define PCI_DM9009_ID   0x90091282      /* Davicom DM9009 ID */
+
+#define DM9102_IO_SIZE  0x80
+#define DM9102A_IO_SIZE 0x100
+#define TX_MAX_SEND_CNT 0x1             /* Maximum tx packet per time */
+#define TX_DESC_CNT     0x10            /* Allocated Tx descriptors */
+#define RX_DESC_CNT     0x20            /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2)	/* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3)	/* TX wakeup count */
+#define DESC_ALL_CNT    (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC    0x600
+#define RX_ALLOC_SIZE   0x620
+#define DM910X_RESET    1
+#define CR0_DEFAULT     0x00E00000      /* TX & RX burst mode */
+#define CR6_DEFAULT     0x00080000      /* HD */
+#define CR7_DEFAULT     0x180c1
+#define CR15_DEFAULT    0x06            /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK  0x4302          /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define DMFE_MAX_MULTICAST 14
+#define RX_COPY_SIZE	100
+#define MAX_CHECK_PACKET 0x8000
+#define DM9801_NOISE_FLOOR 8
+#define DM9802_NOISE_FLOOR 5
+
+#define DMFE_WOL_LINKCHANGE	0x20000000
+#define DMFE_WOL_SAMPLEPACKET	0x10000000
+#define DMFE_WOL_MAGICPACKET	0x08000000
+
+
+#define DMFE_10MHF      0
+#define DMFE_100MHF     1
+#define DMFE_10MFD      4
+#define DMFE_100MFD     5
+#define DMFE_AUTO       8
+#define DMFE_1M_HPNA    0x10
+
+#define DMFE_TXTH_72	0x400000	/* TX TH 72 byte */
+#define DMFE_TXTH_96	0x404000	/* TX TH 96 byte */
+#define DMFE_TXTH_128	0x0000		/* TX TH 128 byte */
+#define DMFE_TXTH_256	0x4000		/* TX TH 256 byte */
+#define DMFE_TXTH_512	0x8000		/* TX TH 512 byte */
+#define DMFE_TXTH_1K	0xC000		/* TX TH 1K  byte */
+
+#define DMFE_TIMER_WUT  (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define DMFE_TX_TIMEOUT ((3*HZ)/2)	/* tx packet time-out time 1.5 s" */
+#define DMFE_TX_KICK 	(HZ/2)	/* tx packet Kick-out time 0.5 s" */
+
+#define DMFE_DBUG(dbug_now, msg, value)			\
+	do {						\
+		if (dmfe_debug || (dbug_now))		\
+			pr_err("%s %lx\n",		\
+			       (msg), (long) (value));	\
+	} while (0)
+
+#define SHOW_MEDIA_TYPE(mode)				\
+	pr_info("Change Speed to %sMhz %s duplex\n" ,	\
+		(mode & 1) ? "100":"10",		\
+		(mode & 4) ? "full":"half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ   0x4800
+#define CR9_SRCS        0x1
+#define CR9_SRCLK       0x2
+#define CR9_CRDOUT      0x8
+#define SROM_DATA_0     0x0
+#define SROM_DATA_1     0x4
+#define PHY_DATA_1      0x20000
+#define PHY_DATA_0      0x00000
+#define MDCLKH          0x10000
+
+#define PHY_POWER_DOWN	0x800
+
+#define SROM_V41_CODE   0x14
+
+#define SROM_CLK_WRITE(data, ioaddr) \
+	outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+	udelay(5); \
+	outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \
+	udelay(5); \
+	outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \
+	udelay(5);
+
+#define __CHK_IO_SIZE(pci_id, dev_rev) \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
+	DM9102A_IO_SIZE: DM9102_IO_SIZE)
+
+#define CHK_IO_SIZE(pci_dev) \
+	(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+	(pci_dev)->revision))
+
+/* Sten Check */
+#define DEVICE net_device
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+        __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+        char *tx_buf_ptr;               /* Data for us */
+        struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
+
+struct rx_desc {
+	__le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+	struct sk_buff *rx_skb_ptr;	/* Data for us */
+	struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
+
+struct dmfe_board_info {
+	u32 chip_id;			/* Chip vendor/Device ID */
+	u8 chip_revision;		/* Chip revision */
+	struct DEVICE *next_dev;	/* next device */
+	struct pci_dev *pdev;		/* PCI device */
+	spinlock_t lock;
+
+	long ioaddr;			/* I/O base address */
+	u32 cr0_data;
+	u32 cr5_data;
+	u32 cr6_data;
+	u32 cr7_data;
+	u32 cr15_data;
+
+	/* pointer for memory physical address */
+	dma_addr_t buf_pool_dma_ptr;	/* Tx buffer pool memory */
+	dma_addr_t buf_pool_dma_start;	/* Tx buffer pool align dword */
+	dma_addr_t desc_pool_dma_ptr;	/* descriptor pool memory */
+	dma_addr_t first_tx_desc_dma;
+	dma_addr_t first_rx_desc_dma;
+
+	/* descriptor pointer */
+	unsigned char *buf_pool_ptr;	/* Tx buffer pool memory */
+	unsigned char *buf_pool_start;	/* Tx buffer pool align dword */
+	unsigned char *desc_pool_ptr;	/* descriptor pool memory */
+	struct tx_desc *first_tx_desc;
+	struct tx_desc *tx_insert_ptr;
+	struct tx_desc *tx_remove_ptr;
+	struct rx_desc *first_rx_desc;
+	struct rx_desc *rx_insert_ptr;
+	struct rx_desc *rx_ready_ptr;	/* packet come pointer */
+	unsigned long tx_packet_cnt;	/* transmitted packet count */
+	unsigned long tx_queue_cnt;	/* wait to send packet count */
+	unsigned long rx_avail_cnt;	/* available rx descriptor count */
+	unsigned long interval_rx_cnt;	/* rx packet count a callback time */
+
+	u16 HPNA_command;		/* For HPNA register 16 */
+	u16 HPNA_timer;			/* For HPNA remote device check */
+	u16 dbug_cnt;
+	u16 NIC_capability;		/* NIC media capability */
+	u16 PHY_reg4;			/* Saved Phyxcer register 4 value */
+
+	u8 HPNA_present;		/* 0:none, 1:DM9801, 2:DM9802 */
+	u8 chip_type;			/* Keep DM9102A chip type */
+	u8 media_mode;			/* user specify media mode */
+	u8 op_mode;			/* real work media mode */
+	u8 phy_addr;
+	u8 wait_reset;			/* Hardware failed, need to reset */
+	u8 dm910x_chk_mode;		/* Operating mode check */
+	u8 first_in_callback;		/* Flag to record state */
+	u8 wol_mode;			/* user WOL settings */
+	struct timer_list timer;
+
+	/* Driver defined statistic counter */
+	unsigned long tx_fifo_underrun;
+	unsigned long tx_loss_carrier;
+	unsigned long tx_no_carrier;
+	unsigned long tx_late_collision;
+	unsigned long tx_excessive_collision;
+	unsigned long tx_jabber_timeout;
+	unsigned long reset_count;
+	unsigned long reset_cr8;
+	unsigned long reset_fatal;
+	unsigned long reset_TXtimeout;
+
+	/* NIC SROM data */
+	unsigned char srom[128];
+};
+
+enum dmfe_offsets {
+	DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+	DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+	DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+	DCR15 = 0x78
+};
+
+enum dmfe_CR6_bits {
+	CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+	CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+	CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration ----------------------------- */
+static int __devinitdata printed_version;
+static const char version[] __devinitconst =
+	"Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
+
+static int dmfe_debug;
+static unsigned char dmfe_media_mode = DMFE_AUTO;
+static u32 dmfe_cr6_user_set;
+
+/* For module input parameter */
+static int debug;
+static u32 cr6set;
+static unsigned char mode = 8;
+static u8 chkmode = 1;
+static u8 HPNA_mode;		/* Default: Low Power/High Speed */
+static u8 HPNA_rx_cmd;		/* Default: Disable Rx remote command */
+static u8 HPNA_tx_cmd;		/* Default: Don't issue remote command */
+static u8 HPNA_NoiseFloor;	/* Default: HPNA NoiseFloor */
+static u8 SF_mode;		/* Special Function: 1:VLAN, 2:RX Flow Control
+				   4: TX pause packet */
+
+
+/* function declaration ------------------------------------- */
+static int dmfe_open(struct DEVICE *);
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *);
+static int dmfe_stop(struct DEVICE *);
+static void dmfe_set_filter_mode(struct DEVICE *);
+static const struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long ,int);
+static irqreturn_t dmfe_interrupt(int , void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_dmfe (struct net_device *dev);
+#endif
+static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long);
+static void allocate_rx_buffer(struct dmfe_board_info *);
+static void update_cr6(u32, unsigned long);
+static void send_filter_frame(struct DEVICE *);
+static void dm9132_id_table(struct DEVICE *);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_write_1bit(unsigned long, u32);
+static u16 phy_read_1bit(unsigned long);
+static u8 dmfe_sense_speed(struct dmfe_board_info *);
+static void dmfe_process_mode(struct dmfe_board_info *);
+static void dmfe_timer(unsigned long);
+static inline u32 cal_CRC(unsigned char *, unsigned int, u8);
+static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *);
+static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *);
+static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *);
+static void dmfe_dynamic_reset(struct DEVICE *);
+static void dmfe_free_rxbuffer(struct dmfe_board_info *);
+static void dmfe_init_dm910x(struct DEVICE *);
+static void dmfe_parse_srom(struct dmfe_board_info *);
+static void dmfe_program_DM9801(struct dmfe_board_info *, int);
+static void dmfe_program_DM9802(struct dmfe_board_info *);
+static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * );
+static void dmfe_set_phyxcer(struct dmfe_board_info *);
+
+/* DM910X network board routine ---------------------------- */
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open 		= dmfe_open,
+	.ndo_stop		= dmfe_stop,
+	.ndo_start_xmit		= dmfe_start_xmit,
+	.ndo_set_rx_mode	= dmfe_set_filter_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_dmfe,
+#endif
+};
+
+/*
+ *	Search DM910X board ,allocate space and register it
+ */
+
+static int __devinit dmfe_init_one (struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	struct dmfe_board_info *db;	/* board information structure */
+	struct net_device *dev;
+	u32 pci_pmr;
+	int i, err;
+
+	DMFE_DBUG(0, "dmfe_init_one()", 0);
+
+	if (!printed_version++)
+		pr_info("%s\n", version);
+
+	/*
+	 *	SPARC on-board DM910x chips should be handled by the main
+	 *	tulip driver, except for early DM9100s.
+	 */
+#ifdef CONFIG_TULIP_DM910X
+	if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) ||
+	    ent->driver_data == PCI_DM9102_ID) {
+		struct device_node *dp = pci_device_to_OF_node(pdev);
+
+		if (dp && of_get_property(dp, "local-mac-address", NULL)) {
+			pr_info("skipping on-board DM910x (use tulip)\n");
+			return -ENODEV;
+		}
+	}
+#endif
+
+	/* Init network device */
+	dev = alloc_etherdev(sizeof(*db));
+	if (dev == NULL)
+		return -ENOMEM;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		pr_warn("32-bit PCI DMA not available\n");
+		err = -ENODEV;
+		goto err_out_free;
+	}
+
+	/* Enable Master/IO access, Disable memory access */
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_out_free;
+
+	if (!pci_resource_start(pdev, 0)) {
+		pr_err("I/O base is zero\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
+		pr_err("Allocated I/O size too small\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+#if 0	/* pci_{enable_device,set_master} sets minimum latency for us now */
+
+	/* Set Latency Timer 80h */
+	/* FIXME: setting values > 32 breaks some SiS 559x stuff.
+	   Need a PCI quirk.. */
+
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80);
+#endif
+
+	if (pci_request_regions(pdev, DRV_NAME)) {
+		pr_err("Failed to request PCI regions\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	/* Init system & device */
+	db = netdev_priv(dev);
+
+	/* Allocate Tx/Rx descriptor memory */
+	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
+			DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+	if (!db->desc_pool_ptr)
+		goto err_out_res;
+
+	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
+			TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+	if (!db->buf_pool_ptr)
+		goto err_out_free_desc;
+
+	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+	db->buf_pool_start = db->buf_pool_ptr;
+	db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+	db->chip_id = ent->driver_data;
+	db->ioaddr = pci_resource_start(pdev, 0);
+	db->chip_revision = pdev->revision;
+	db->wol_mode = 0;
+
+	db->pdev = pdev;
+
+	dev->base_addr = db->ioaddr;
+	dev->irq = pdev->irq;
+	pci_set_drvdata(pdev, dev);
+	dev->netdev_ops = &netdev_ops;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	netif_carrier_off(dev);
+	spin_lock_init(&db->lock);
+
+	pci_read_config_dword(pdev, 0x50, &pci_pmr);
+	pci_pmr &= 0x70000;
+	if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
+		db->chip_type = 1;	/* DM9102A E3 */
+	else
+		db->chip_type = 0;
+
+	/* read 64 word srom data */
+	for (i = 0; i < 64; i++)
+		((__le16 *) db->srom)[i] =
+			cpu_to_le16(read_srom_word(db->ioaddr, i));
+
+	/* Set Node address */
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = db->srom[20 + i];
+
+	err = register_netdev (dev);
+	if (err)
+		goto err_out_free_buf;
+
+	dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n",
+		 ent->driver_data >> 16,
+		 pci_name(pdev), dev->dev_addr, dev->irq);
+
+	pci_set_master(pdev);
+
+	return 0;
+
+err_out_free_buf:
+	pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+			    db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_free_desc:
+	pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+			    db->desc_pool_ptr, db->desc_pool_dma_ptr);
+err_out_res:
+	pci_release_regions(pdev);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_free:
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+
+	return err;
+}
+
+
+static void __devexit dmfe_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	DMFE_DBUG(0, "dmfe_remove_one()", 0);
+
+ 	if (dev) {
+
+		unregister_netdev(dev);
+
+		pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+					DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ 					db->desc_pool_dma_ptr);
+		pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+					db->buf_pool_ptr, db->buf_pool_dma_ptr);
+		pci_release_regions(pdev);
+		free_netdev(dev);	/* free board information */
+
+		pci_set_drvdata(pdev, NULL);
+	}
+
+	DMFE_DBUG(0, "dmfe_remove_one() exit", 0);
+}
+
+
+/*
+ *	Open the interface.
+ *	The interface is opened whenever "ifconfig" actives it.
+ */
+
+static int dmfe_open(struct DEVICE *dev)
+{
+	int ret;
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	DMFE_DBUG(0, "dmfe_open", 0);
+
+	ret = request_irq(dev->irq, dmfe_interrupt,
+			  IRQF_SHARED, dev->name, dev);
+	if (ret)
+		return ret;
+
+	/* system variable init */
+	db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set;
+	db->tx_packet_cnt = 0;
+	db->tx_queue_cnt = 0;
+	db->rx_avail_cnt = 0;
+	db->wait_reset = 0;
+
+	db->first_in_callback = 0;
+	db->NIC_capability = 0xf;	/* All capability*/
+	db->PHY_reg4 = 0x1e0;
+
+	/* CR6 operation mode decision */
+	if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
+		(db->chip_revision >= 0x30) ) {
+    		db->cr6_data |= DMFE_TXTH_256;
+		db->cr0_data = CR0_DEFAULT;
+		db->dm910x_chk_mode=4;		/* Enter the normal mode */
+ 	} else {
+		db->cr6_data |= CR6_SFT;	/* Store & Forward mode */
+		db->cr0_data = 0;
+		db->dm910x_chk_mode = 1;	/* Enter the check mode */
+	}
+
+	/* Initialize DM910X board */
+	dmfe_init_dm910x(dev);
+
+	/* Active System Interface */
+	netif_wake_queue(dev);
+
+	/* set and active a timer process */
+	init_timer(&db->timer);
+	db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
+	db->timer.data = (unsigned long)dev;
+	db->timer.function = dmfe_timer;
+	add_timer(&db->timer);
+
+	return 0;
+}
+
+
+/*	Initialize DM910X board
+ *	Reset DM910X board
+ *	Initialize TX/Rx descriptor chain structure
+ *	Send the set-up frame
+ *	Enable Tx/Rx machine
+ */
+
+static void dmfe_init_dm910x(struct DEVICE *dev)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = db->ioaddr;
+
+	DMFE_DBUG(0, "dmfe_init_dm910x()", 0);
+
+	/* Reset DM910x MAC controller */
+	outl(DM910X_RESET, ioaddr + DCR0);	/* RESET MAC */
+	udelay(100);
+	outl(db->cr0_data, ioaddr + DCR0);
+	udelay(5);
+
+	/* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */
+	db->phy_addr = 1;
+
+	/* Parser SROM and media mode */
+	dmfe_parse_srom(db);
+	db->media_mode = dmfe_media_mode;
+
+	/* RESET Phyxcer Chip by GPR port bit 7 */
+	outl(0x180, ioaddr + DCR12);		/* Let bit 7 output port */
+	if (db->chip_id == PCI_DM9009_ID) {
+		outl(0x80, ioaddr + DCR12);	/* Issue RESET signal */
+		mdelay(300);			/* Delay 300 ms */
+	}
+	outl(0x0, ioaddr + DCR12);	/* Clear RESET signal */
+
+	/* Process Phyxcer Media Mode */
+	if ( !(db->media_mode & 0x10) )	/* Force 1M mode */
+		dmfe_set_phyxcer(db);
+
+	/* Media Mode Process */
+	if ( !(db->media_mode & DMFE_AUTO) )
+		db->op_mode = db->media_mode; 	/* Force Mode */
+
+	/* Initialize Transmit/Receive decriptor and CR3/4 */
+	dmfe_descriptor_init(db, ioaddr);
+
+	/* Init CR6 to program DM910x operation */
+	update_cr6(db->cr6_data, ioaddr);
+
+	/* Send setup frame */
+	if (db->chip_id == PCI_DM9132_ID)
+		dm9132_id_table(dev);	/* DM9132 */
+	else
+		send_filter_frame(dev);	/* DM9102/DM9102A */
+
+	/* Init CR7, interrupt active bit */
+	db->cr7_data = CR7_DEFAULT;
+	outl(db->cr7_data, ioaddr + DCR7);
+
+	/* Init CR15, Tx jabber and Rx watchdog timer */
+	outl(db->cr15_data, ioaddr + DCR15);
+
+	/* Enable DM910X Tx/Rx function */
+	db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000;
+	update_cr6(db->cr6_data, ioaddr);
+}
+
+
+/*
+ *	Hardware start transmission.
+ *	Send a packet to media from the upper layer.
+ */
+
+static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
+					 struct DEVICE *dev)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+	struct tx_desc *txptr;
+	unsigned long flags;
+
+	DMFE_DBUG(0, "dmfe_start_xmit", 0);
+
+	/* Too large packet check */
+	if (skb->len > MAX_PACKET_SIZE) {
+		pr_err("big packet = %d\n", (u16)skb->len);
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	/* Resource flag check */
+	netif_stop_queue(dev);
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* No Tx resource check, it never happen nromally */
+	if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) {
+		spin_unlock_irqrestore(&db->lock, flags);
+		pr_err("No Tx resource %ld\n", db->tx_queue_cnt);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Disable NIC interrupt */
+	outl(0, dev->base_addr + DCR7);
+
+	/* transmit this packet */
+	txptr = db->tx_insert_ptr;
+	skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len);
+	txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
+
+	/* Point to next transmit free descriptor */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+
+	/* Transmit Packet Process */
+	if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) {
+		txptr->tdes0 = cpu_to_le32(0x80000000);	/* Set owner bit */
+		db->tx_packet_cnt++;			/* Ready to send */
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+		dev->trans_start = jiffies;		/* saved time stamp */
+	} else {
+		db->tx_queue_cnt++;			/* queue TX packet */
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+	}
+
+	/* Tx resource check */
+	if ( db->tx_queue_cnt < TX_FREE_DESC_CNT )
+		netif_wake_queue(dev);
+
+	/* Restore CR7 to enable interrupt */
+	spin_unlock_irqrestore(&db->lock, flags);
+	outl(db->cr7_data, dev->base_addr + DCR7);
+
+	/* free this SKB */
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ *	Stop the interface.
+ *	The interface is stopped when it is brought.
+ */
+
+static int dmfe_stop(struct DEVICE *dev)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+
+	DMFE_DBUG(0, "dmfe_stop", 0);
+
+	/* disable system */
+	netif_stop_queue(dev);
+
+	/* deleted timer */
+	del_timer_sync(&db->timer);
+
+	/* Reset & stop DM910X board */
+	outl(DM910X_RESET, ioaddr + DCR0);
+	udelay(5);
+	phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+	/* free interrupt */
+	free_irq(dev->irq, dev);
+
+	/* free allocated rx buffer */
+	dmfe_free_rxbuffer(db);
+
+#if 0
+	/* show statistic counter */
+	printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+	       db->tx_fifo_underrun, db->tx_excessive_collision,
+	       db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+	       db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+	       db->reset_fatal, db->reset_TXtimeout);
+#endif
+
+	return 0;
+}
+
+
+/*
+ *	DM9102 insterrupt handler
+ *	receive the packet to upper layer, free the transmitted packet
+ */
+
+static irqreturn_t dmfe_interrupt(int irq, void *dev_id)
+{
+	struct DEVICE *dev = dev_id;
+	struct dmfe_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+	unsigned long flags;
+
+	DMFE_DBUG(0, "dmfe_interrupt()", 0);
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* Got DM910X status */
+	db->cr5_data = inl(ioaddr + DCR5);
+	outl(db->cr5_data, ioaddr + DCR5);
+	if ( !(db->cr5_data & 0xc1) ) {
+		spin_unlock_irqrestore(&db->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	/* Disable all interrupt in CR7 to solve the interrupt edge problem */
+	outl(0, ioaddr + DCR7);
+
+	/* Check system status */
+	if (db->cr5_data & 0x2000) {
+		/* system bus error happen */
+		DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
+		db->reset_fatal++;
+		db->wait_reset = 1;	/* Need to RESET */
+		spin_unlock_irqrestore(&db->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	 /* Received the coming packet */
+	if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+		dmfe_rx_packet(dev, db);
+
+	/* reallocate rx descriptor buffer */
+	if (db->rx_avail_cnt<RX_DESC_CNT)
+		allocate_rx_buffer(db);
+
+	/* Free the transmitted descriptor */
+	if ( db->cr5_data & 0x01)
+		dmfe_free_tx_pkt(dev, db);
+
+	/* Mode Check */
+	if (db->dm910x_chk_mode & 0x2) {
+		db->dm910x_chk_mode = 0x4;
+		db->cr6_data |= 0x100;
+		update_cr6(db->cr6_data, db->ioaddr);
+	}
+
+	/* Restore CR7 to enable interrupt mask */
+	outl(db->cr7_data, ioaddr + DCR7);
+
+	spin_unlock_irqrestore(&db->lock, flags);
+	return IRQ_HANDLED;
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void poll_dmfe (struct net_device *dev)
+{
+	/* disable_irq here is not very nice, but with the lockless
+	   interrupt handler we have no other choice. */
+	disable_irq(dev->irq);
+	dmfe_interrupt (dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+/*
+ *	Free TX resource after TX complete
+ */
+
+static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db)
+{
+	struct tx_desc *txptr;
+	unsigned long ioaddr = dev->base_addr;
+	u32 tdes0;
+
+	txptr = db->tx_remove_ptr;
+	while(db->tx_packet_cnt) {
+		tdes0 = le32_to_cpu(txptr->tdes0);
+		if (tdes0 & 0x80000000)
+			break;
+
+		/* A packet sent completed */
+		db->tx_packet_cnt--;
+		dev->stats.tx_packets++;
+
+		/* Transmit statistic counter */
+		if ( tdes0 != 0x7fffffff ) {
+			dev->stats.collisions += (tdes0 >> 3) & 0xf;
+			dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+			if (tdes0 & TDES0_ERR_MASK) {
+				dev->stats.tx_errors++;
+
+				if (tdes0 & 0x0002) {	/* UnderRun */
+					db->tx_fifo_underrun++;
+					if ( !(db->cr6_data & CR6_SFT) ) {
+						db->cr6_data = db->cr6_data | CR6_SFT;
+						update_cr6(db->cr6_data, db->ioaddr);
+					}
+				}
+				if (tdes0 & 0x0100)
+					db->tx_excessive_collision++;
+				if (tdes0 & 0x0200)
+					db->tx_late_collision++;
+				if (tdes0 & 0x0400)
+					db->tx_no_carrier++;
+				if (tdes0 & 0x0800)
+					db->tx_loss_carrier++;
+				if (tdes0 & 0x4000)
+					db->tx_jabber_timeout++;
+			}
+		}
+
+    		txptr = txptr->next_tx_desc;
+	}/* End of while */
+
+	/* Update TX remove pointer to next */
+	db->tx_remove_ptr = txptr;
+
+	/* Send the Tx packet in queue */
+	if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) {
+		txptr->tdes0 = cpu_to_le32(0x80000000);	/* Set owner bit */
+		db->tx_packet_cnt++;			/* Ready to send */
+		db->tx_queue_cnt--;
+		outl(0x1, ioaddr + DCR1);		/* Issue Tx polling */
+		dev->trans_start = jiffies;		/* saved time stamp */
+	}
+
+	/* Resource available check */
+	if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT )
+		netif_wake_queue(dev);	/* Active upper layer, send again */
+}
+
+
+/*
+ *	Calculate the CRC valude of the Rx packet
+ *	flag = 	1 : return the reverse CRC (for the received packet CRC)
+ *		0 : return the normal CRC (for Hash Table index)
+ */
+
+static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag)
+{
+	u32 crc = crc32(~0, Data, Len);
+	if (flag) crc = ~crc;
+	return crc;
+}
+
+
+/*
+ *	Receive the come packet and pass to upper layer
+ */
+
+static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db)
+{
+	struct rx_desc *rxptr;
+	struct sk_buff *skb, *newskb;
+	int rxlen;
+	u32 rdes0;
+
+	rxptr = db->rx_ready_ptr;
+
+	while(db->rx_avail_cnt) {
+		rdes0 = le32_to_cpu(rxptr->rdes0);
+		if (rdes0 & 0x80000000)	/* packet owner check */
+			break;
+
+		db->rx_avail_cnt--;
+		db->interval_rx_cnt++;
+
+		pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2),
+				 RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+
+		if ( (rdes0 & 0x300) != 0x300) {
+			/* A packet without First/Last flag */
+			/* reuse this SKB */
+			DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+			dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+		} else {
+			/* A packet with First/Last flag */
+			rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
+
+			/* error summary bit check */
+			if (rdes0 & 0x8000) {
+				/* This is a error packet */
+				dev->stats.rx_errors++;
+				if (rdes0 & 1)
+					dev->stats.rx_fifo_errors++;
+				if (rdes0 & 2)
+					dev->stats.rx_crc_errors++;
+				if (rdes0 & 0x80)
+					dev->stats.rx_length_errors++;
+			}
+
+			if ( !(rdes0 & 0x8000) ||
+				((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+				skb = rxptr->rx_skb_ptr;
+
+				/* Received Packet CRC check need or not */
+				if ( (db->dm910x_chk_mode & 1) &&
+					(cal_CRC(skb->data, rxlen, 1) !=
+					(*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */
+					/* Found a error received packet */
+					dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+					db->dm910x_chk_mode = 3;
+				} else {
+					/* Good packet, send to upper layer */
+					/* Shorst packet used new SKB */
+					if ((rxlen < RX_COPY_SIZE) &&
+						((newskb = dev_alloc_skb(rxlen + 2))
+						!= NULL)) {
+
+						skb = newskb;
+						/* size less than COPY_SIZE, allocate a rxlen SKB */
+						skb_reserve(skb, 2); /* 16byte align */
+						skb_copy_from_linear_data(rxptr->rx_skb_ptr,
+							  skb_put(skb, rxlen),
+									  rxlen);
+						dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+					} else
+						skb_put(skb, rxlen);
+
+					skb->protocol = eth_type_trans(skb, dev);
+					netif_rx(skb);
+					dev->stats.rx_packets++;
+					dev->stats.rx_bytes += rxlen;
+				}
+			} else {
+				/* Reuse SKB buffer when the packet is error */
+				DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+				dmfe_reuse_skb(db, rxptr->rx_skb_ptr);
+			}
+		}
+
+		rxptr = rxptr->next_rx_desc;
+	}
+
+	db->rx_ready_ptr = rxptr;
+}
+
+/*
+ * Set DM910X multicast address
+ */
+
+static void dmfe_set_filter_mode(struct DEVICE * dev)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+	unsigned long flags;
+	int mc_count = netdev_mc_count(dev);
+
+	DMFE_DBUG(0, "dmfe_set_filter_mode()", 0);
+	spin_lock_irqsave(&db->lock, flags);
+
+	if (dev->flags & IFF_PROMISC) {
+		DMFE_DBUG(0, "Enable PROM Mode", 0);
+		db->cr6_data |= CR6_PM | CR6_PBF;
+		update_cr6(db->cr6_data, db->ioaddr);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) {
+		DMFE_DBUG(0, "Pass all multicast address", mc_count);
+		db->cr6_data &= ~(CR6_PM | CR6_PBF);
+		db->cr6_data |= CR6_PAM;
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	DMFE_DBUG(0, "Set multicast address", mc_count);
+	if (db->chip_id == PCI_DM9132_ID)
+		dm9132_id_table(dev);	/* DM9132 */
+	else
+		send_filter_frame(dev);	/* DM9102/DM9102A */
+	spin_unlock_irqrestore(&db->lock, flags);
+}
+
+/*
+ * 	Ethtool interace
+ */
+
+static void dmfe_ethtool_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct dmfe_board_info *np = netdev_priv(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	if (np->pdev)
+		strcpy(info->bus_info, pci_name(np->pdev));
+	else
+		sprintf(info->bus_info, "EISA 0x%lx %d",
+			dev->base_addr, dev->irq);
+}
+
+static int dmfe_ethtool_set_wol(struct net_device *dev,
+				struct ethtool_wolinfo *wolinfo)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+		   		WAKE_ARP | WAKE_MAGICSECURE))
+		   return -EOPNOTSUPP;
+
+	db->wol_mode = wolinfo->wolopts;
+	return 0;
+}
+
+static void dmfe_ethtool_get_wol(struct net_device *dev,
+				 struct ethtool_wolinfo *wolinfo)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = db->wol_mode;
+}
+
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= dmfe_ethtool_get_drvinfo,
+	.get_link               = ethtool_op_get_link,
+	.set_wol		= dmfe_ethtool_set_wol,
+	.get_wol		= dmfe_ethtool_get_wol,
+};
+
+/*
+ *	A periodic timer routine
+ *	Dynamic media sense, allocate Rx buffer...
+ */
+
+static void dmfe_timer(unsigned long data)
+{
+	u32 tmp_cr8;
+	unsigned char tmp_cr12;
+	struct DEVICE *dev = (struct DEVICE *) data;
+	struct dmfe_board_info *db = netdev_priv(dev);
+ 	unsigned long flags;
+
+	int link_ok, link_ok_phy;
+
+	DMFE_DBUG(0, "dmfe_timer()", 0);
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* Media mode process when Link OK before enter this route */
+	if (db->first_in_callback == 0) {
+		db->first_in_callback = 1;
+		if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) {
+			db->cr6_data &= ~0x40000;
+			update_cr6(db->cr6_data, db->ioaddr);
+			phy_write(db->ioaddr,
+				  db->phy_addr, 0, 0x1000, db->chip_id);
+			db->cr6_data |= 0x40000;
+			update_cr6(db->cr6_data, db->ioaddr);
+			db->timer.expires = DMFE_TIMER_WUT + HZ * 2;
+			add_timer(&db->timer);
+			spin_unlock_irqrestore(&db->lock, flags);
+			return;
+		}
+	}
+
+
+	/* Operating Mode Check */
+	if ( (db->dm910x_chk_mode & 0x1) &&
+		(dev->stats.rx_packets > MAX_CHECK_PACKET) )
+		db->dm910x_chk_mode = 0x4;
+
+	/* Dynamic reset DM910X : system error or transmit time-out */
+	tmp_cr8 = inl(db->ioaddr + DCR8);
+	if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+		db->reset_cr8++;
+		db->wait_reset = 1;
+	}
+	db->interval_rx_cnt = 0;
+
+	/* TX polling kick monitor */
+	if ( db->tx_packet_cnt &&
+	     time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) {
+		outl(0x1, dev->base_addr + DCR1);   /* Tx polling again */
+
+		/* TX Timeout */
+		if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) {
+			db->reset_TXtimeout++;
+			db->wait_reset = 1;
+			dev_warn(&dev->dev, "Tx timeout - resetting\n");
+		}
+	}
+
+	if (db->wait_reset) {
+		DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
+		db->reset_count++;
+		dmfe_dynamic_reset(dev);
+		db->first_in_callback = 0;
+		db->timer.expires = DMFE_TIMER_WUT;
+		add_timer(&db->timer);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	/* Link status check, Dynamic media type change */
+	if (db->chip_id == PCI_DM9132_ID)
+		tmp_cr12 = inb(db->ioaddr + DCR9 + 3);	/* DM9132 */
+	else
+		tmp_cr12 = inb(db->ioaddr + DCR12);	/* DM9102/DM9102A */
+
+	if ( ((db->chip_id == PCI_DM9102_ID) &&
+		(db->chip_revision == 0x30)) ||
+		((db->chip_id == PCI_DM9132_ID) &&
+		(db->chip_revision == 0x10)) ) {
+		/* DM9102A Chip */
+		if (tmp_cr12 & 2)
+			link_ok = 0;
+		else
+			link_ok = 1;
+	}
+	else
+		/*0x43 is used instead of 0x3 because bit 6 should represent
+			link status of external PHY */
+		link_ok = (tmp_cr12 & 0x43) ? 1 : 0;
+
+
+	/* If chip reports that link is failed it could be because external
+		PHY link status pin is not connected correctly to chip
+		To be sure ask PHY too.
+	*/
+
+	/* need a dummy read because of PHY's register latch*/
+	phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id);
+	link_ok_phy = (phy_read (db->ioaddr,
+		       db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0;
+
+	if (link_ok_phy != link_ok) {
+		DMFE_DBUG (0, "PHY and chip report different link status", 0);
+		link_ok = link_ok | link_ok_phy;
+ 	}
+
+	if ( !link_ok && netif_carrier_ok(dev)) {
+		/* Link Failed */
+		DMFE_DBUG(0, "Link Failed", tmp_cr12);
+		netif_carrier_off(dev);
+
+		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
+		/* AUTO or force 1M Homerun/Longrun don't need */
+		if ( !(db->media_mode & 0x38) )
+			phy_write(db->ioaddr, db->phy_addr,
+				  0, 0x1000, db->chip_id);
+
+		/* AUTO mode, if INT phyxcer link failed, select EXT device */
+		if (db->media_mode & DMFE_AUTO) {
+			/* 10/100M link failed, used 1M Home-Net */
+			db->cr6_data|=0x00040000;	/* bit18=1, MII */
+			db->cr6_data&=~0x00000200;	/* bit9=0, HD mode */
+			update_cr6(db->cr6_data, db->ioaddr);
+		}
+	} else if (!netif_carrier_ok(dev)) {
+
+		DMFE_DBUG(0, "Link link OK", tmp_cr12);
+
+		/* Auto Sense Speed */
+		if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) {
+			netif_carrier_on(dev);
+			SHOW_MEDIA_TYPE(db->op_mode);
+		}
+
+		dmfe_process_mode(db);
+	}
+
+	/* HPNA remote command check */
+	if (db->HPNA_command & 0xf00) {
+		db->HPNA_timer--;
+		if (!db->HPNA_timer)
+			dmfe_HPNA_remote_cmd_chk(db);
+	}
+
+	/* Timer active again */
+	db->timer.expires = DMFE_TIMER_WUT;
+	add_timer(&db->timer);
+	spin_unlock_irqrestore(&db->lock, flags);
+}
+
+
+/*
+ *	Dynamic reset the DM910X board
+ *	Stop DM910X board
+ *	Free Tx/Rx allocated memory
+ *	Reset DM910X board
+ *	Re-initialize DM910X board
+ */
+
+static void dmfe_dynamic_reset(struct DEVICE *dev)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+
+	DMFE_DBUG(0, "dmfe_dynamic_reset()", 0);
+
+	/* Sopt MAC controller */
+	db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
+	update_cr6(db->cr6_data, dev->base_addr);
+	outl(0, dev->base_addr + DCR7);		/* Disable Interrupt */
+	outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+	/* Disable upper layer interface */
+	netif_stop_queue(dev);
+
+	/* Free Rx Allocate buffer */
+	dmfe_free_rxbuffer(db);
+
+	/* system variable init */
+	db->tx_packet_cnt = 0;
+	db->tx_queue_cnt = 0;
+	db->rx_avail_cnt = 0;
+	netif_carrier_off(dev);
+	db->wait_reset = 0;
+
+	/* Re-initialize DM910X board */
+	dmfe_init_dm910x(dev);
+
+	/* Restart upper layer interface */
+	netif_wake_queue(dev);
+}
+
+
+/*
+ *	free all allocated rx buffer
+ */
+
+static void dmfe_free_rxbuffer(struct dmfe_board_info * db)
+{
+	DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0);
+
+	/* free allocated rx buffer */
+	while (db->rx_avail_cnt) {
+		dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+		db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+		db->rx_avail_cnt--;
+	}
+}
+
+
+/*
+ *	Reuse the SK buffer
+ */
+
+static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb)
+{
+	struct rx_desc *rxptr = db->rx_insert_ptr;
+
+	if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+		rxptr->rx_skb_ptr = skb;
+		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev,
+			    skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		wmb();
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+		db->rx_avail_cnt++;
+		db->rx_insert_ptr = rxptr->next_rx_desc;
+	} else
+		DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
+}
+
+
+/*
+ *	Initialize transmit/Receive descriptor
+ *	Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr)
+{
+	struct tx_desc *tmp_tx;
+	struct rx_desc *tmp_rx;
+	unsigned char *tmp_buf;
+	dma_addr_t tmp_tx_dma, tmp_rx_dma;
+	dma_addr_t tmp_buf_dma;
+	int i;
+
+	DMFE_DBUG(0, "dmfe_descriptor_init()", 0);
+
+	/* tx descriptor start pointer */
+	db->tx_insert_ptr = db->first_tx_desc;
+	db->tx_remove_ptr = db->first_tx_desc;
+	outl(db->first_tx_desc_dma, ioaddr + DCR4);     /* TX DESC address */
+
+	/* rx descriptor start pointer */
+	db->first_rx_desc = (void *)db->first_tx_desc +
+			sizeof(struct tx_desc) * TX_DESC_CNT;
+
+	db->first_rx_desc_dma =  db->first_tx_desc_dma +
+			sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->rx_insert_ptr = db->first_rx_desc;
+	db->rx_ready_ptr = db->first_rx_desc;
+	outl(db->first_rx_desc_dma, ioaddr + DCR3);	/* RX DESC address */
+
+	/* Init Transmit chain */
+	tmp_buf = db->buf_pool_start;
+	tmp_buf_dma = db->buf_pool_dma_start;
+	tmp_tx_dma = db->first_tx_desc_dma;
+	for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+		tmp_tx->tx_buf_ptr = tmp_buf;
+		tmp_tx->tdes0 = cpu_to_le32(0);
+		tmp_tx->tdes1 = cpu_to_le32(0x81000000);	/* IC, chain */
+		tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+		tmp_tx_dma += sizeof(struct tx_desc);
+		tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+		tmp_tx->next_tx_desc = tmp_tx + 1;
+		tmp_buf = tmp_buf + TX_BUF_ALLOC;
+		tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+	}
+	(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+	tmp_tx->next_tx_desc = db->first_tx_desc;
+
+	 /* Init Receive descriptor chain */
+	tmp_rx_dma=db->first_rx_desc_dma;
+	for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+		tmp_rx->rdes0 = cpu_to_le32(0);
+		tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+		tmp_rx_dma += sizeof(struct rx_desc);
+		tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+		tmp_rx->next_rx_desc = tmp_rx + 1;
+	}
+	(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+	tmp_rx->next_rx_desc = db->first_rx_desc;
+
+	/* pre-allocate Rx buffer */
+	allocate_rx_buffer(db);
+}
+
+
+/*
+ *	Update CR6 value
+ *	Firstly stop DM910X , then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+	u32 cr6_tmp;
+
+	cr6_tmp = cr6_data & ~0x2002;           /* stop Tx/Rx */
+	outl(cr6_tmp, ioaddr + DCR6);
+	udelay(5);
+	outl(cr6_data, ioaddr + DCR6);
+	udelay(5);
+}
+
+
+/*
+ *	Send a setup frame for DM9132
+ *	This setup frame initialize DM910X address filter mode
+*/
+
+static void dm9132_id_table(struct DEVICE *dev)
+{
+	struct netdev_hw_addr *ha;
+	u16 * addrptr;
+	unsigned long ioaddr = dev->base_addr+0xc0;		/* ID Table */
+	u32 hash_val;
+	u16 i, hash_table[4];
+
+	DMFE_DBUG(0, "dm9132_id_table()", 0);
+
+	/* Node address */
+	addrptr = (u16 *) dev->dev_addr;
+	outw(addrptr[0], ioaddr);
+	ioaddr += 4;
+	outw(addrptr[1], ioaddr);
+	ioaddr += 4;
+	outw(addrptr[2], ioaddr);
+	ioaddr += 4;
+
+	/* Clear Hash Table */
+	memset(hash_table, 0, sizeof(hash_table));
+
+	/* broadcast address */
+	hash_table[3] = 0x8000;
+
+	/* the multicast address in Hash Table : 64 bits */
+	netdev_for_each_mc_addr(ha, dev) {
+		hash_val = cal_CRC((char *) ha->addr, 6, 0) & 0x3f;
+		hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16);
+	}
+
+	/* Write the hash table to MAC MD table */
+	for (i = 0; i < 4; i++, ioaddr += 4)
+		outw(hash_table[i], ioaddr);
+}
+
+
+/*
+ *	Send a setup frame for DM9102/DM9102A
+ *	This setup frame initialize DM910X address filter mode
+ */
+
+static void send_filter_frame(struct DEVICE *dev)
+{
+	struct dmfe_board_info *db = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+	struct tx_desc *txptr;
+	u16 * addrptr;
+	u32 * suptr;
+	int i;
+
+	DMFE_DBUG(0, "send_filter_frame()", 0);
+
+	txptr = db->tx_insert_ptr;
+	suptr = (u32 *) txptr->tx_buf_ptr;
+
+	/* Node address */
+	addrptr = (u16 *) dev->dev_addr;
+	*suptr++ = addrptr[0];
+	*suptr++ = addrptr[1];
+	*suptr++ = addrptr[2];
+
+	/* broadcast address */
+	*suptr++ = 0xffff;
+	*suptr++ = 0xffff;
+	*suptr++ = 0xffff;
+
+	/* fit the multicast address */
+	netdev_for_each_mc_addr(ha, dev) {
+		addrptr = (u16 *) ha->addr;
+		*suptr++ = addrptr[0];
+		*suptr++ = addrptr[1];
+		*suptr++ = addrptr[2];
+	}
+
+	for (i = netdev_mc_count(dev); i < 14; i++) {
+		*suptr++ = 0xffff;
+		*suptr++ = 0xffff;
+		*suptr++ = 0xffff;
+	}
+
+	/* prepare the setup frame */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+	txptr->tdes1 = cpu_to_le32(0x890000c0);
+
+	/* Resource Check and Send the setup packet */
+	if (!db->tx_packet_cnt) {
+		/* Resource Empty */
+		db->tx_packet_cnt++;
+		txptr->tdes0 = cpu_to_le32(0x80000000);
+		update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+		update_cr6(db->cr6_data, dev->base_addr);
+		dev->trans_start = jiffies;
+	} else
+		db->tx_queue_cnt++;	/* Put in TX queue */
+}
+
+
+/*
+ *	Allocate rx buffer,
+ *	As possible as allocate maxiumn Rx buffer
+ */
+
+static void allocate_rx_buffer(struct dmfe_board_info *db)
+{
+	struct rx_desc *rxptr;
+	struct sk_buff *skb;
+
+	rxptr = db->rx_insert_ptr;
+
+	while(db->rx_avail_cnt < RX_DESC_CNT) {
+		if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+			break;
+		rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data,
+				    RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		wmb();
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+		rxptr = rxptr->next_rx_desc;
+		db->rx_avail_cnt++;
+	}
+
+	db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ *	Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+	int i;
+	u16 srom_data = 0;
+	long cr9_ioaddr = ioaddr + DCR9;
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	/* Send the Read Command 110b */
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+	/* Send the offset */
+	for (i = 5; i >= 0; i--) {
+		srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+		SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+	}
+
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	for (i = 16; i > 0; i--) {
+		outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+		udelay(5);
+		srom_data = (srom_data << 1) |
+				((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+		outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+		udelay(5);
+	}
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	return srom_data;
+}
+
+
+/*
+ *	Auto sense the media mode
+ */
+
+static u8 dmfe_sense_speed(struct dmfe_board_info * db)
+{
+	u8 ErrFlag = 0;
+	u16 phy_mode;
+
+	/* CR6 bit18=0, select 10/100M */
+	update_cr6( (db->cr6_data & ~0x40000), db->ioaddr);
+
+	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+
+	if ( (phy_mode & 0x24) == 0x24 ) {
+		if (db->chip_id == PCI_DM9132_ID)	/* DM9132 */
+			phy_mode = phy_read(db->ioaddr,
+				    db->phy_addr, 7, db->chip_id) & 0xf000;
+		else 				/* DM9102/DM9102A */
+			phy_mode = phy_read(db->ioaddr,
+				    db->phy_addr, 17, db->chip_id) & 0xf000;
+		switch (phy_mode) {
+		case 0x1000: db->op_mode = DMFE_10MHF; break;
+		case 0x2000: db->op_mode = DMFE_10MFD; break;
+		case 0x4000: db->op_mode = DMFE_100MHF; break;
+		case 0x8000: db->op_mode = DMFE_100MFD; break;
+		default: db->op_mode = DMFE_10MHF;
+			ErrFlag = 1;
+			break;
+		}
+	} else {
+		db->op_mode = DMFE_10MHF;
+		DMFE_DBUG(0, "Link Failed :", phy_mode);
+		ErrFlag = 1;
+	}
+
+	return ErrFlag;
+}
+
+
+/*
+ *	Set 10/100 phyxcer capability
+ *	AUTO mode : phyxcer register4 is NIC capability
+ *	Force mode: phyxcer register4 is the force media
+ */
+
+static void dmfe_set_phyxcer(struct dmfe_board_info *db)
+{
+	u16 phy_reg;
+
+	/* Select 10/100M phyxcer */
+	db->cr6_data &= ~0x40000;
+	update_cr6(db->cr6_data, db->ioaddr);
+
+	/* DM9009 Chip: Phyxcer reg18 bit12=0 */
+	if (db->chip_id == PCI_DM9009_ID) {
+		phy_reg = phy_read(db->ioaddr,
+				   db->phy_addr, 18, db->chip_id) & ~0x1000;
+
+		phy_write(db->ioaddr,
+			  db->phy_addr, 18, phy_reg, db->chip_id);
+	}
+
+	/* Phyxcer capability setting */
+	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+	if (db->media_mode & DMFE_AUTO) {
+		/* AUTO Mode */
+		phy_reg |= db->PHY_reg4;
+	} else {
+		/* Force Mode */
+		switch(db->media_mode) {
+		case DMFE_10MHF: phy_reg |= 0x20; break;
+		case DMFE_10MFD: phy_reg |= 0x40; break;
+		case DMFE_100MHF: phy_reg |= 0x80; break;
+		case DMFE_100MFD: phy_reg |= 0x100; break;
+		}
+		if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61;
+	}
+
+  	/* Write new capability to Phyxcer Reg4 */
+	if ( !(phy_reg & 0x01e0)) {
+		phy_reg|=db->PHY_reg4;
+		db->media_mode|=DMFE_AUTO;
+	}
+	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ 	/* Restart Auto-Negotiation */
+	if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+		phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id);
+	if ( !db->chip_type )
+		phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+}
+
+
+/*
+ *	Process op-mode
+ *	AUTO mode : PHY controller in Auto-negotiation Mode
+ *	Force mode: PHY controller in force mode with HUB
+ *			N-way force capability with SWITCH
+ */
+
+static void dmfe_process_mode(struct dmfe_board_info *db)
+{
+	u16 phy_reg;
+
+	/* Full Duplex Mode Check */
+	if (db->op_mode & 0x4)
+		db->cr6_data |= CR6_FDM;	/* Set Full Duplex Bit */
+	else
+		db->cr6_data &= ~CR6_FDM;	/* Clear Full Duplex Bit */
+
+	/* Transciver Selection */
+	if (db->op_mode & 0x10)		/* 1M HomePNA */
+		db->cr6_data |= 0x40000;/* External MII select */
+	else
+		db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */
+
+	update_cr6(db->cr6_data, db->ioaddr);
+
+	/* 10/100M phyxcer force mode need */
+	if ( !(db->media_mode & 0x18)) {
+		/* Forece Mode */
+		phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+		if ( !(phy_reg & 0x1) ) {
+			/* parter without N-Way capability */
+			phy_reg = 0x0;
+			switch(db->op_mode) {
+			case DMFE_10MHF: phy_reg = 0x0; break;
+			case DMFE_10MFD: phy_reg = 0x100; break;
+			case DMFE_100MHF: phy_reg = 0x2000; break;
+			case DMFE_100MFD: phy_reg = 0x2100; break;
+			}
+			phy_write(db->ioaddr,
+				  db->phy_addr, 0, phy_reg, db->chip_id);
+       			if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) )
+				mdelay(20);
+			phy_write(db->ioaddr,
+				  db->phy_addr, 0, phy_reg, db->chip_id);
+		}
+	}
+}
+
+
+/*
+ *	Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+		      u16 phy_data, u32 chip_id)
+{
+	u16 i;
+	unsigned long ioaddr;
+
+	if (chip_id == PCI_DM9132_ID) {
+		ioaddr = iobase + 0x80 + offset * 4;
+		outw(phy_data, ioaddr);
+	} else {
+		/* DM9102/DM9102A Chip */
+		ioaddr = iobase + DCR9;
+
+		/* Send 33 synchronization clock to Phy controller */
+		for (i = 0; i < 35; i++)
+			phy_write_1bit(ioaddr, PHY_DATA_1);
+
+		/* Send start command(01) to Phy */
+		phy_write_1bit(ioaddr, PHY_DATA_0);
+		phy_write_1bit(ioaddr, PHY_DATA_1);
+
+		/* Send write command(01) to Phy */
+		phy_write_1bit(ioaddr, PHY_DATA_0);
+		phy_write_1bit(ioaddr, PHY_DATA_1);
+
+		/* Send Phy address */
+		for (i = 0x10; i > 0; i = i >> 1)
+			phy_write_1bit(ioaddr,
+				       phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+
+		/* Send register address */
+		for (i = 0x10; i > 0; i = i >> 1)
+			phy_write_1bit(ioaddr,
+				       offset & i ? PHY_DATA_1 : PHY_DATA_0);
+
+		/* written trasnition */
+		phy_write_1bit(ioaddr, PHY_DATA_1);
+		phy_write_1bit(ioaddr, PHY_DATA_0);
+
+		/* Write a word data to PHY controller */
+		for ( i = 0x8000; i > 0; i >>= 1)
+			phy_write_1bit(ioaddr,
+				       phy_data & i ? PHY_DATA_1 : PHY_DATA_0);
+	}
+}
+
+
+/*
+ *	Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+	int i;
+	u16 phy_data;
+	unsigned long ioaddr;
+
+	if (chip_id == PCI_DM9132_ID) {
+		/* DM9132 Chip */
+		ioaddr = iobase + 0x80 + offset * 4;
+		phy_data = inw(ioaddr);
+	} else {
+		/* DM9102/DM9102A Chip */
+		ioaddr = iobase + DCR9;
+
+		/* Send 33 synchronization clock to Phy controller */
+		for (i = 0; i < 35; i++)
+			phy_write_1bit(ioaddr, PHY_DATA_1);
+
+		/* Send start command(01) to Phy */
+		phy_write_1bit(ioaddr, PHY_DATA_0);
+		phy_write_1bit(ioaddr, PHY_DATA_1);
+
+		/* Send read command(10) to Phy */
+		phy_write_1bit(ioaddr, PHY_DATA_1);
+		phy_write_1bit(ioaddr, PHY_DATA_0);
+
+		/* Send Phy address */
+		for (i = 0x10; i > 0; i = i >> 1)
+			phy_write_1bit(ioaddr,
+				       phy_addr & i ? PHY_DATA_1 : PHY_DATA_0);
+
+		/* Send register address */
+		for (i = 0x10; i > 0; i = i >> 1)
+			phy_write_1bit(ioaddr,
+				       offset & i ? PHY_DATA_1 : PHY_DATA_0);
+
+		/* Skip transition state */
+		phy_read_1bit(ioaddr);
+
+		/* read 16bit data */
+		for (phy_data = 0, i = 0; i < 16; i++) {
+			phy_data <<= 1;
+			phy_data |= phy_read_1bit(ioaddr);
+		}
+	}
+
+	return phy_data;
+}
+
+
+/*
+ *	Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data)
+{
+	outl(phy_data, ioaddr);			/* MII Clock Low */
+	udelay(1);
+	outl(phy_data | MDCLKH, ioaddr);	/* MII Clock High */
+	udelay(1);
+	outl(phy_data, ioaddr);			/* MII Clock Low */
+	udelay(1);
+}
+
+
+/*
+ *	Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr)
+{
+	u16 phy_data;
+
+	outl(0x50000, ioaddr);
+	udelay(1);
+	phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+	outl(0x40000, ioaddr);
+	udelay(1);
+
+	return phy_data;
+}
+
+
+/*
+ *	Parser SROM and media mode
+ */
+
+static void dmfe_parse_srom(struct dmfe_board_info * db)
+{
+	char * srom = db->srom;
+	int dmfe_mode, tmp_reg;
+
+	DMFE_DBUG(0, "dmfe_parse_srom() ", 0);
+
+	/* Init CR15 */
+	db->cr15_data = CR15_DEFAULT;
+
+	/* Check SROM Version */
+	if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) {
+		/* SROM V4.01 */
+		/* Get NIC support media mode */
+		db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34));
+		db->PHY_reg4 = 0;
+		for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) {
+			switch( db->NIC_capability & tmp_reg ) {
+			case 0x1: db->PHY_reg4 |= 0x0020; break;
+			case 0x2: db->PHY_reg4 |= 0x0040; break;
+			case 0x4: db->PHY_reg4 |= 0x0080; break;
+			case 0x8: db->PHY_reg4 |= 0x0100; break;
+			}
+		}
+
+		/* Media Mode Force or not check */
+		dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) &
+			     le32_to_cpup((__le32 *) (srom + 36)));
+		switch(dmfe_mode) {
+		case 0x4: dmfe_media_mode = DMFE_100MHF; break;	/* 100MHF */
+		case 0x2: dmfe_media_mode = DMFE_10MFD; break;	/* 10MFD */
+		case 0x8: dmfe_media_mode = DMFE_100MFD; break;	/* 100MFD */
+		case 0x100:
+		case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */
+		}
+
+		/* Special Function setting */
+		/* VLAN function */
+		if ( (SF_mode & 0x1) || (srom[43] & 0x80) )
+			db->cr15_data |= 0x40;
+
+		/* Flow Control */
+		if ( (SF_mode & 0x2) || (srom[40] & 0x1) )
+			db->cr15_data |= 0x400;
+
+		/* TX pause packet */
+		if ( (SF_mode & 0x4) || (srom[40] & 0xe) )
+			db->cr15_data |= 0x9800;
+	}
+
+	/* Parse HPNA parameter */
+	db->HPNA_command = 1;
+
+	/* Accept remote command or not */
+	if (HPNA_rx_cmd == 0)
+		db->HPNA_command |= 0x8000;
+
+	 /* Issue remote command & operation mode */
+	if (HPNA_tx_cmd == 1)
+		switch(HPNA_mode) {	/* Issue Remote Command */
+		case 0: db->HPNA_command |= 0x0904; break;
+		case 1: db->HPNA_command |= 0x0a00; break;
+		case 2: db->HPNA_command |= 0x0506; break;
+		case 3: db->HPNA_command |= 0x0602; break;
+		}
+	else
+		switch(HPNA_mode) {	/* Don't Issue */
+		case 0: db->HPNA_command |= 0x0004; break;
+		case 1: db->HPNA_command |= 0x0000; break;
+		case 2: db->HPNA_command |= 0x0006; break;
+		case 3: db->HPNA_command |= 0x0002; break;
+		}
+
+	/* Check DM9801 or DM9802 present or not */
+	db->HPNA_present = 0;
+	update_cr6(db->cr6_data|0x40000, db->ioaddr);
+	tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id);
+	if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) {
+		/* DM9801 or DM9802 present */
+		db->HPNA_timer = 8;
+		if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) {
+			/* DM9801 HomeRun */
+			db->HPNA_present = 1;
+			dmfe_program_DM9801(db, tmp_reg);
+		} else {
+			/* DM9802 LongRun */
+			db->HPNA_present = 2;
+			dmfe_program_DM9802(db);
+		}
+	}
+
+}
+
+
+/*
+ *	Init HomeRun DM9801
+ */
+
+static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev)
+{
+	uint reg17, reg25;
+
+	if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR;
+	switch(HPNA_rev) {
+	case 0xb900: /* DM9801 E3 */
+		db->HPNA_command |= 0x1000;
+		reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id);
+		reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000;
+		reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+		break;
+	case 0xb901: /* DM9801 E4 */
+		reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+		reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor;
+		reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+		reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3;
+		break;
+	case 0xb902: /* DM9801 E5 */
+	case 0xb903: /* DM9801 E6 */
+	default:
+		db->HPNA_command |= 0x1000;
+		reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+		reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5;
+		reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id);
+		reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor;
+		break;
+	}
+	phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+	phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id);
+	phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id);
+}
+
+
+/*
+ *	Init HomeRun DM9802
+ */
+
+static void dmfe_program_DM9802(struct dmfe_board_info * db)
+{
+	uint phy_reg;
+
+	if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR;
+	phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id);
+	phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id);
+	phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor;
+	phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id);
+}
+
+
+/*
+ *	Check remote HPNA power and speed status. If not correct,
+ *	issue command again.
+*/
+
+static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db)
+{
+	uint phy_reg;
+
+	/* Got remote device status */
+	phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60;
+	switch(phy_reg) {
+	case 0x00: phy_reg = 0x0a00;break; /* LP/LS */
+	case 0x20: phy_reg = 0x0900;break; /* LP/HS */
+	case 0x40: phy_reg = 0x0600;break; /* HP/LS */
+	case 0x60: phy_reg = 0x0500;break; /* HP/HS */
+	}
+
+	/* Check remote device status match our setting ot not */
+	if ( phy_reg != (db->HPNA_command & 0x0f00) ) {
+		phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command,
+			  db->chip_id);
+		db->HPNA_timer=8;
+	} else
+		db->HPNA_timer=600;	/* Match, every 10 minutes, check */
+}
+
+
+
+static DEFINE_PCI_DEVICE_TABLE(dmfe_pci_tbl) = {
+	{ 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID },
+	{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID },
+	{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID },
+	{ 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl);
+
+
+#ifdef CONFIG_PM
+static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pci_dev);
+	struct dmfe_board_info *db = netdev_priv(dev);
+	u32 tmp;
+
+	/* Disable upper layer interface */
+	netif_device_detach(dev);
+
+	/* Disable Tx/Rx */
+	db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);
+	update_cr6(db->cr6_data, dev->base_addr);
+
+	/* Disable Interrupt */
+	outl(0, dev->base_addr + DCR7);
+	outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+	/* Fre RX buffers */
+	dmfe_free_rxbuffer(db);
+
+	/* Enable WOL */
+	pci_read_config_dword(pci_dev, 0x40, &tmp);
+	tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET);
+
+	if (db->wol_mode & WAKE_PHY)
+		tmp |= DMFE_WOL_LINKCHANGE;
+	if (db->wol_mode & WAKE_MAGIC)
+		tmp |= DMFE_WOL_MAGICPACKET;
+
+	pci_write_config_dword(pci_dev, 0x40, tmp);
+
+	pci_enable_wake(pci_dev, PCI_D3hot, 1);
+	pci_enable_wake(pci_dev, PCI_D3cold, 1);
+
+	/* Power down device*/
+	pci_save_state(pci_dev);
+	pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state));
+
+	return 0;
+}
+
+static int dmfe_resume(struct pci_dev *pci_dev)
+{
+	struct net_device *dev = pci_get_drvdata(pci_dev);
+	u32 tmp;
+
+	pci_set_power_state(pci_dev, PCI_D0);
+	pci_restore_state(pci_dev);
+
+	/* Re-initialize DM910X board */
+	dmfe_init_dm910x(dev);
+
+	/* Disable WOL */
+	pci_read_config_dword(pci_dev, 0x40, &tmp);
+
+	tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET);
+	pci_write_config_dword(pci_dev, 0x40, tmp);
+
+	pci_enable_wake(pci_dev, PCI_D3hot, 0);
+	pci_enable_wake(pci_dev, PCI_D3cold, 0);
+
+	/* Restart upper layer interface */
+	netif_device_attach(dev);
+
+	return 0;
+}
+#else
+#define dmfe_suspend NULL
+#define dmfe_resume NULL
+#endif
+
+static struct pci_driver dmfe_driver = {
+	.name		= "dmfe",
+	.id_table	= dmfe_pci_tbl,
+	.probe		= dmfe_init_one,
+	.remove		= __devexit_p(dmfe_remove_one),
+	.suspend        = dmfe_suspend,
+	.resume         = dmfe_resume
+};
+
+MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw");
+MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(debug, int, 0);
+module_param(mode, byte, 0);
+module_param(cr6set, int, 0);
+module_param(chkmode, byte, 0);
+module_param(HPNA_mode, byte, 0);
+module_param(HPNA_rx_cmd, byte, 0);
+module_param(HPNA_tx_cmd, byte, 0);
+module_param(HPNA_NoiseFloor, byte, 0);
+module_param(SF_mode, byte, 0);
+MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "Davicom DM9xxx: "
+		"Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function "
+		"(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)");
+
+/*	Description:
+ *	when user used insmod to add module, system invoked init_module()
+ *	to initialize and register.
+ */
+
+static int __init dmfe_init_module(void)
+{
+	int rc;
+
+	pr_info("%s\n", version);
+	printed_version = 1;
+
+	DMFE_DBUG(0, "init_module() ", debug);
+
+	if (debug)
+		dmfe_debug = debug;	/* set debug flag */
+	if (cr6set)
+		dmfe_cr6_user_set = cr6set;
+
+ 	switch(mode) {
+   	case DMFE_10MHF:
+	case DMFE_100MHF:
+	case DMFE_10MFD:
+	case DMFE_100MFD:
+	case DMFE_1M_HPNA:
+		dmfe_media_mode = mode;
+		break;
+	default:dmfe_media_mode = DMFE_AUTO;
+		break;
+	}
+
+	if (HPNA_mode > 4)
+		HPNA_mode = 0;		/* Default: LP/HS */
+	if (HPNA_rx_cmd > 1)
+		HPNA_rx_cmd = 0;	/* Default: Ignored remote cmd */
+	if (HPNA_tx_cmd > 1)
+		HPNA_tx_cmd = 0;	/* Default: Don't issue remote cmd */
+	if (HPNA_NoiseFloor > 15)
+		HPNA_NoiseFloor = 0;
+
+	rc = pci_register_driver(&dmfe_driver);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+
+/*
+ *	Description:
+ *	when user used rmmod to delete module, system invoked clean_module()
+ *	to un-register all registered services.
+ */
+
+static void __exit dmfe_cleanup_module(void)
+{
+	DMFE_DBUG(0, "dmfe_clean_module() ", debug);
+	pci_unregister_driver(&dmfe_driver);
+}
+
+module_init(dmfe_init_module);
+module_exit(dmfe_cleanup_module);
diff --git a/drivers/net/ethernet/dec/tulip/eeprom.c b/drivers/net/ethernet/dec/tulip/eeprom.c
new file mode 100644
index 000000000000..14d5b611783d
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/eeprom.c
@@ -0,0 +1,383 @@
+/*
+	drivers/net/tulip/eeprom.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please submit bug reports to http://bugzilla.kernel.org/.
+*/
+
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include "tulip.h"
+#include <linux/init.h>
+#include <asm/unaligned.h>
+
+
+
+/* Serial EEPROM section. */
+/* The main routine to parse the very complicated SROM structure.
+   Search www.digital.com for "21X4 SROM" to get details.
+   This code is very complex, and will require changes to support
+   additional cards, so I'll be verbose about what is going on.
+   */
+
+/* Known cards that have old-style EEPROMs. */
+static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
+  {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c,
+			  0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }},
+  {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f,
+			   0x0000, 0x009E, /* 10baseT */
+			   0x0004, 0x009E, /* 10baseT-FD */
+			   0x0903, 0x006D, /* 100baseTx */
+			   0x0905, 0x006D, /* 100baseTx-FD */ }},
+  {"Cogent EM100", 0, 0, 0x92, { 0x1e00, 0x0000, 0x0800, 0x063f,
+				 0x0107, 0x8021, /* 100baseFx */
+				 0x0108, 0x8021, /* 100baseFx-FD */
+				 0x0100, 0x009E, /* 10baseT */
+				 0x0104, 0x009E, /* 10baseT-FD */
+				 0x0103, 0x006D, /* 100baseTx */
+				 0x0105, 0x006D, /* 100baseTx-FD */ }},
+  {"Maxtech NX-110", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x0513,
+				   0x1001, 0x009E, /* 10base2, CSR12 0x10*/
+				   0x0000, 0x009E, /* 10baseT */
+				   0x0004, 0x009E, /* 10baseT-FD */
+				   0x0303, 0x006D, /* 100baseTx, CSR12 0x03 */
+				   0x0305, 0x006D, /* 100baseTx-FD CSR12 0x03 */}},
+  {"Accton EN1207", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x051F,
+				  0x1B01, 0x0000, /* 10base2,   CSR12 0x1B */
+				  0x0B00, 0x009E, /* 10baseT,   CSR12 0x0B */
+				  0x0B04, 0x009E, /* 10baseT-FD,CSR12 0x0B */
+				  0x1B03, 0x006D, /* 100baseTx, CSR12 0x1B */
+				  0x1B05, 0x006D, /* 100baseTx-FD CSR12 0x1B */
+   }},
+  {"NetWinder", 0x00, 0x10, 0x57,
+	/* Default media = MII
+	 * MII block, reset sequence (3) = 0x0821 0x0000 0x0001, capabilities 0x01e1
+	 */
+	{ 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
+  },
+  {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset	*/
+					 0x0000, /* 0 == high offset, 0 == gap		*/
+					 0x0800, /* Default Autoselect			*/
+					 0x8001, /* 1 leaf, extended type, bogus len	*/
+					 0x0003, /* Type 3 (MII), PHY #0		*/
+					 0x0400, /* 0 init instr, 4 reset instr		*/
+					 0x0801, /* Set control mode, GP0 output	*/
+					 0x0000, /* Drive GP0 Low (RST is active low)	*/
+					 0x0800, /* control mode, GP0 input (undriven)	*/
+					 0x0000, /* clear control mode			*/
+					 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX	*/
+					 0x01e0, /* Advertise all above			*/
+					 0x5000, /* FDX all above			*/
+					 0x1800, /* Set fast TTM in 100bt modes		*/
+					 0x0000, /* PHY cannot be unplugged		*/
+  }},
+  {NULL}};
+
+
+static const char *block_name[] __devinitdata = {
+	"21140 non-MII",
+	"21140 MII PHY",
+	"21142 Serial PHY",
+	"21142 MII PHY",
+	"21143 SYM PHY",
+	"21143 reset method"
+};
+
+
+/**
+ * tulip_build_fake_mediatable - Build a fake mediatable entry.
+ * @tp: Ptr to the tulip private data.
+ *
+ * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
+ * srom and can not be handled under the fixup routine.  These cards
+ * still need a valid mediatable entry for correct csr12 setup and
+ * mii handling.
+ *
+ * Since this is currently a parisc-linux specific function, the
+ * #ifdef __hppa__ should completely optimize this function away for
+ * non-parisc hardware.
+ */
+static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
+{
+#ifdef CONFIG_GSC
+	if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) {
+		static unsigned char leafdata[] =
+			{ 0x01,       /* phy number */
+			  0x02,       /* gpr setup sequence length */
+			  0x02, 0x00, /* gpr setup sequence */
+			  0x02,       /* phy reset sequence length */
+			  0x01, 0x00, /* phy reset sequence */
+			  0x00, 0x78, /* media capabilities */
+			  0x00, 0xe0, /* nway advertisement */
+			  0x00, 0x05, /* fdx bit map */
+			  0x00, 0x06  /* ttm bit map */
+			};
+
+		tp->mtable = kmalloc(sizeof(struct mediatable) +
+				     sizeof(struct medialeaf), GFP_KERNEL);
+
+		if (tp->mtable == NULL)
+			return; /* Horrible, impossible failure. */
+
+		tp->mtable->defaultmedia = 0x800;
+		tp->mtable->leafcount = 1;
+		tp->mtable->csr12dir = 0x3f; /* inputs on bit7 for hsc-pci, bit6 for pci-fx */
+		tp->mtable->has_nonmii = 0;
+		tp->mtable->has_reset = 0;
+		tp->mtable->has_mii = 1;
+		tp->mtable->csr15dir = tp->mtable->csr15val = 0;
+		tp->mtable->mleaf[0].type = 1;
+		tp->mtable->mleaf[0].media = 11;
+		tp->mtable->mleaf[0].leafdata = &leafdata[0];
+		tp->flags |= HAS_PHY_IRQ;
+		tp->csr12_shadow = -1;
+	}
+#endif
+}
+
+void __devinit tulip_parse_eeprom(struct net_device *dev)
+{
+	/*
+	  dev is not registered at this point, so logging messages can't
+	  use dev_<level> or netdev_<level> but dev->name is good via a
+	  hack in the caller
+	*/
+
+	/* The last media info list parsed, for multiport boards.  */
+	static struct mediatable *last_mediatable;
+	static unsigned char *last_ee_data;
+	static int controller_index;
+	struct tulip_private *tp = netdev_priv(dev);
+	unsigned char *ee_data = tp->eeprom;
+	int i;
+
+	tp->mtable = NULL;
+	/* Detect an old-style (SA only) EEPROM layout:
+	   memcmp(eedata, eedata+16, 8). */
+	for (i = 0; i < 8; i ++)
+		if (ee_data[i] != ee_data[16+i])
+			break;
+	if (i >= 8) {
+		if (ee_data[0] == 0xff) {
+			if (last_mediatable) {
+				controller_index++;
+				pr_info("%s: Controller %d of multiport board\n",
+					dev->name, controller_index);
+				tp->mtable = last_mediatable;
+				ee_data = last_ee_data;
+				goto subsequent_board;
+			} else
+				pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+					dev->name);
+			return;
+		}
+	  /* Do a fix-up based on the vendor half of the station address prefix. */
+	  for (i = 0; eeprom_fixups[i].name; i++) {
+		  if (dev->dev_addr[0] == eeprom_fixups[i].addr0 &&
+		      dev->dev_addr[1] == eeprom_fixups[i].addr1 &&
+		      dev->dev_addr[2] == eeprom_fixups[i].addr2) {
+		  if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55)
+			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
+		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
+				 sizeof(eeprom_fixups[i].newtable));
+		  pr_info("%s: Old format EEPROM on '%s' board.  Using substitute media control info\n",
+			  dev->name, eeprom_fixups[i].name);
+		  break;
+		}
+	  }
+	  if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
+		  pr_info("%s: Old style EEPROM with no media selection information\n",
+			  dev->name);
+		return;
+	  }
+	}
+
+	controller_index = 0;
+	if (ee_data[19] > 1) {		/* Multiport board. */
+		last_ee_data = ee_data;
+	}
+subsequent_board:
+
+	if (ee_data[27] == 0) {		/* No valid media table. */
+		tulip_build_fake_mediatable(tp);
+	} else {
+		unsigned char *p = (void *)ee_data + ee_data[27];
+		unsigned char csr12dir = 0;
+		int count, new_advertise = 0;
+		struct mediatable *mtable;
+		u16 media = get_u16(p);
+
+		p += 2;
+		if (tp->flags & CSR12_IN_SROM)
+			csr12dir = *p++;
+		count = *p++;
+
+	        /* there is no phy information, don't even try to build mtable */
+	        if (count == 0) {
+			if (tulip_debug > 0)
+				pr_warn("%s: no phy info, aborting mtable build\n",
+					dev->name);
+		        return;
+		}
+
+		mtable = kmalloc(sizeof(struct mediatable) +
+				 count * sizeof(struct medialeaf),
+				 GFP_KERNEL);
+		if (mtable == NULL)
+			return;				/* Horrible, impossible failure. */
+		last_mediatable = tp->mtable = mtable;
+		mtable->defaultmedia = media;
+		mtable->leafcount = count;
+		mtable->csr12dir = csr12dir;
+		mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
+		mtable->csr15dir = mtable->csr15val = 0;
+
+		pr_info("%s: EEPROM default media type %s\n",
+			dev->name,
+			media & 0x0800 ? "Autosense"
+				       : medianame[media & MEDIA_MASK]);
+		for (i = 0; i < count; i++) {
+			struct medialeaf *leaf = &mtable->mleaf[i];
+
+			if ((p[0] & 0x80) == 0) { /* 21140 Compact block. */
+				leaf->type = 0;
+				leaf->media = p[0] & 0x3f;
+				leaf->leafdata = p;
+				if ((p[2] & 0x61) == 0x01)	/* Bogus, but Znyx boards do it. */
+					mtable->has_mii = 1;
+				p += 4;
+			} else {
+				leaf->type = p[1];
+				if (p[1] == 0x05) {
+					mtable->has_reset = i;
+					leaf->media = p[2] & 0x0f;
+				} else if (tp->chip_id == DM910X && p[1] == 0x80) {
+					/* Hack to ignore Davicom delay period block */
+					mtable->leafcount--;
+					count--;
+					i--;
+					leaf->leafdata = p + 2;
+					p += (p[0] & 0x3f) + 1;
+					continue;
+				} else if (p[1] & 1) {
+					int gpr_len, reset_len;
+
+					mtable->has_mii = 1;
+					leaf->media = 11;
+					gpr_len=p[3]*2;
+					reset_len=p[4+gpr_len]*2;
+					new_advertise |= get_u16(&p[7+gpr_len+reset_len]);
+				} else {
+					mtable->has_nonmii = 1;
+					leaf->media = p[2] & MEDIA_MASK;
+					/* Davicom's media number for 100BaseTX is strange */
+					if (tp->chip_id == DM910X && leaf->media == 1)
+						leaf->media = 3;
+					switch (leaf->media) {
+					case 0: new_advertise |= 0x0020; break;
+					case 4: new_advertise |= 0x0040; break;
+					case 3: new_advertise |= 0x0080; break;
+					case 5: new_advertise |= 0x0100; break;
+					case 6: new_advertise |= 0x0200; break;
+					}
+					if (p[1] == 2  &&  leaf->media == 0) {
+						if (p[2] & 0x40) {
+							u32 base15 = get_unaligned((u16*)&p[7]);
+							mtable->csr15dir =
+								(get_unaligned((u16*)&p[9])<<16) + base15;
+							mtable->csr15val =
+								(get_unaligned((u16*)&p[11])<<16) + base15;
+						} else {
+							mtable->csr15dir = get_unaligned((u16*)&p[3])<<16;
+							mtable->csr15val = get_unaligned((u16*)&p[5])<<16;
+						}
+					}
+				}
+				leaf->leafdata = p + 2;
+				p += (p[0] & 0x3f) + 1;
+			}
+			if (tulip_debug > 1  &&  leaf->media == 11) {
+				unsigned char *bp = leaf->leafdata;
+				pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+					dev->name,
+					bp[0], bp[1], bp[2 + bp[1]*2],
+					bp[5 + bp[2 + bp[1]*2]*2],
+					bp[4 + bp[2 + bp[1]*2]*2]);
+			}
+			pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+				dev->name,
+				i, medianame[leaf->media & 15], leaf->media,
+				leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+				leaf->type);
+		}
+		if (new_advertise)
+			tp->sym_advertise = new_advertise;
+	}
+}
+/* Reading a serial EEPROM is a "bit" grungy, but we work our way through:->.*/
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x02	/* EEPROM shift clock. */
+#define EE_CS		0x01	/* EEPROM chip select. */
+#define EE_DATA_WRITE	0x04	/* Data from the Tulip to EEPROM. */
+#define EE_WRITE_0	0x01
+#define EE_WRITE_1	0x05
+#define EE_DATA_READ	0x08	/* Data from the EEPROM chip. */
+#define EE_ENB		(0x4800 | EE_CS)
+
+/* Delay between EEPROM clock transitions.
+   Even at 33Mhz current PCI implementations don't overrun the EEPROM clock.
+   We add a bus turn-around to insure that this remains true. */
+#define eeprom_delay()	ioread32(ee_addr)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_READ_CMD		(6)
+
+/* Note: this routine returns extra data bits for size detection. */
+int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
+{
+	int i;
+	unsigned retval = 0;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ee_addr = tp->base_addr + CSR9;
+	int read_cmd = location | (EE_READ_CMD << addr_len);
+
+	/* If location is past the end of what we can address, don't
+	 * read some other location (ie truncate). Just return zero.
+	 */
+	if (location > (1 << addr_len) - 1)
+		return 0;
+
+	iowrite32(EE_ENB & ~EE_CS, ee_addr);
+	iowrite32(EE_ENB, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 4 + addr_len; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+		iowrite32(EE_ENB | dataval, ee_addr);
+		eeprom_delay();
+		iowrite32(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay();
+		retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
+	}
+	iowrite32(EE_ENB, ee_addr);
+	eeprom_delay();
+
+	for (i = 16; i > 0; i--) {
+		iowrite32(EE_ENB | EE_SHIFT_CLK, ee_addr);
+		eeprom_delay();
+		retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
+		iowrite32(EE_ENB, ee_addr);
+		eeprom_delay();
+	}
+
+	/* Terminate the EEPROM access. */
+	iowrite32(EE_ENB & ~EE_CS, ee_addr);
+	return (tp->flags & HAS_SWAPPED_SEEPROM) ? swab16(retval) : retval;
+}
+
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
new file mode 100644
index 000000000000..4fb8c8c0a420
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -0,0 +1,808 @@
+/*
+	drivers/net/tulip/interrupt.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+        Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+#include <linux/pci.h>
+#include "tulip.h"
+#include <linux/etherdevice.h>
+
+int tulip_rx_copybreak;
+unsigned int tulip_max_interrupt_work;
+
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+#define MIT_SIZE 15
+#define MIT_TABLE 15 /* We use 0 or max */
+
+static unsigned int mit_table[MIT_SIZE+1] =
+{
+        /*  CRS11 21143 hardware Mitigation Control Interrupt
+            We use only RX mitigation we other techniques for
+            TX intr. mitigation.
+
+           31    Cycle Size (timer control)
+           30:27 TX timer in 16 * Cycle size
+           26:24 TX No pkts before Int.
+           23:20 RX timer in Cycle size
+           19:17 RX No pkts before Int.
+           16       Continues Mode (CM)
+        */
+
+        0x0,             /* IM disabled */
+        0x80150000,      /* RX time = 1, RX pkts = 2, CM = 1 */
+        0x80150000,
+        0x80270000,
+        0x80370000,
+        0x80490000,
+        0x80590000,
+        0x80690000,
+        0x807B0000,
+        0x808B0000,
+        0x809D0000,
+        0x80AD0000,
+        0x80BD0000,
+        0x80CF0000,
+        0x80DF0000,
+//       0x80FF0000      /* RX time = 16, RX pkts = 7, CM = 1 */
+        0x80F10000      /* RX time = 16, RX pkts = 0, CM = 1 */
+};
+#endif
+
+
+int tulip_refill_rx(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int entry;
+	int refilled = 0;
+
+	/* Refill the Rx ring buffers. */
+	for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) {
+		entry = tp->dirty_rx % RX_RING_SIZE;
+		if (tp->rx_buffers[entry].skb == NULL) {
+			struct sk_buff *skb;
+			dma_addr_t mapping;
+
+			skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ);
+			if (skb == NULL)
+				break;
+
+			mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
+						 PCI_DMA_FROMDEVICE);
+			tp->rx_buffers[entry].mapping = mapping;
+
+			skb->dev = dev;			/* Mark as being used by this device. */
+			tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
+			refilled++;
+		}
+		tp->rx_ring[entry].status = cpu_to_le32(DescOwned);
+	}
+	if(tp->chip_id == LC82C168) {
+		if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) {
+			/* Rx stopped due to out of buffers,
+			 * restart it
+			 */
+			iowrite32(0x01, tp->base_addr + CSR2);
+		}
+	}
+	return refilled;
+}
+
+#ifdef CONFIG_TULIP_NAPI
+
+void oom_timer(unsigned long data)
+{
+        struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	napi_schedule(&tp->napi);
+}
+
+int tulip_poll(struct napi_struct *napi, int budget)
+{
+	struct tulip_private *tp = container_of(napi, struct tulip_private, napi);
+	struct net_device *dev = tp->dev;
+	int entry = tp->cur_rx % RX_RING_SIZE;
+	int work_done = 0;
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+	int received = 0;
+#endif
+
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+
+/* that one buffer is needed for mit activation; or might be a
+   bug in the ring buffer code; check later -- JHS*/
+
+        if (budget >=RX_RING_SIZE) budget--;
+#endif
+
+	if (tulip_debug > 4)
+		netdev_dbg(dev, " In tulip_rx(), entry %d %08x\n",
+			   entry, tp->rx_ring[entry].status);
+
+       do {
+		if (ioread32(tp->base_addr + CSR5) == 0xffffffff) {
+			netdev_dbg(dev, " In tulip_poll(), hardware disappeared\n");
+			break;
+		}
+               /* Acknowledge current RX interrupt sources. */
+               iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5);
+
+
+               /* If we own the next entry, it is a new packet. Send it up. */
+               while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
+                       s32 status = le32_to_cpu(tp->rx_ring[entry].status);
+		       short pkt_len;
+
+                       if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx)
+                               break;
+
+		       if (tulip_debug > 5)
+				netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+					   entry, status);
+
+		       if (++work_done >= budget)
+                               goto not_done;
+
+		       /*
+			* Omit the four octet CRC from the length.
+			* (May not be considered valid until we have
+			* checked status for RxLengthOver2047 bits)
+			*/
+		       pkt_len = ((status >> 16) & 0x7ff) - 4;
+
+		       /*
+			* Maximum pkt_len is 1518 (1514 + vlan header)
+			* Anything higher than this is always invalid
+			* regardless of RxLengthOver2047 bits
+			*/
+
+		       if ((status & (RxLengthOver2047 |
+				      RxDescCRCError |
+				      RxDescCollisionSeen |
+				      RxDescRunt |
+				      RxDescDescErr |
+				      RxWholePkt)) != RxWholePkt ||
+			   pkt_len > 1518) {
+			       if ((status & (RxLengthOver2047 |
+					      RxWholePkt)) != RxWholePkt) {
+                                /* Ingore earlier buffers. */
+                                       if ((status & 0xffff) != 0x7fff) {
+                                               if (tulip_debug > 1)
+                                                       dev_warn(&dev->dev,
+								"Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+								status);
+						dev->stats.rx_length_errors++;
+					}
+			       } else {
+                                /* There was a fatal error. */
+				       if (tulip_debug > 2)
+						netdev_dbg(dev, "Receive error, Rx status %08x\n",
+							   status);
+					dev->stats.rx_errors++; /* end of a packet.*/
+					if (pkt_len > 1518 ||
+					    (status & RxDescRunt))
+						dev->stats.rx_length_errors++;
+
+					if (status & 0x0004)
+						dev->stats.rx_frame_errors++;
+					if (status & 0x0002)
+						dev->stats.rx_crc_errors++;
+					if (status & 0x0001)
+						dev->stats.rx_fifo_errors++;
+                               }
+                       } else {
+                               struct sk_buff *skb;
+
+                               /* Check if the packet is long enough to accept without copying
+                                  to a minimally-sized skbuff. */
+                               if (pkt_len < tulip_rx_copybreak &&
+                                   (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+                                       skb_reserve(skb, 2);    /* 16 byte align the IP header */
+                                       pci_dma_sync_single_for_cpu(tp->pdev,
+								   tp->rx_buffers[entry].mapping,
+								   pkt_len, PCI_DMA_FROMDEVICE);
+#if ! defined(__alpha__)
+                                       skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
+                                                        pkt_len);
+                                       skb_put(skb, pkt_len);
+#else
+                                       memcpy(skb_put(skb, pkt_len),
+                                              tp->rx_buffers[entry].skb->data,
+                                              pkt_len);
+#endif
+                                       pci_dma_sync_single_for_device(tp->pdev,
+								      tp->rx_buffers[entry].mapping,
+								      pkt_len, PCI_DMA_FROMDEVICE);
+                               } else {        /* Pass up the skb already on the Rx ring. */
+                                       char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
+                                                            pkt_len);
+
+#ifndef final_version
+                                       if (tp->rx_buffers[entry].mapping !=
+                                           le32_to_cpu(tp->rx_ring[entry].buffer1)) {
+                                               dev_err(&dev->dev,
+						       "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n",
+						       le32_to_cpu(tp->rx_ring[entry].buffer1),
+						       (unsigned long long)tp->rx_buffers[entry].mapping,
+						       skb->head, temp);
+                                       }
+#endif
+
+                                       pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
+                                                        PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+
+                                       tp->rx_buffers[entry].skb = NULL;
+                                       tp->rx_buffers[entry].mapping = 0;
+                               }
+                               skb->protocol = eth_type_trans(skb, dev);
+
+                               netif_receive_skb(skb);
+
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
+                       }
+#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+		       received++;
+#endif
+
+                       entry = (++tp->cur_rx) % RX_RING_SIZE;
+                       if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4)
+                               tulip_refill_rx(dev);
+
+                }
+
+               /* New ack strategy... irq does not ack Rx any longer
+                  hopefully this helps */
+
+               /* Really bad things can happen here... If new packet arrives
+                * and an irq arrives (tx or just due to occasionally unset
+                * mask), it will be acked by irq handler, but new thread
+                * is not scheduled. It is major hole in design.
+                * No idea how to fix this if "playing with fire" will fail
+                * tomorrow (night 011029). If it will not fail, we won
+                * finally: amount of IO did not increase at all. */
+       } while ((ioread32(tp->base_addr + CSR5) & RxIntr));
+
+ #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION
+
+          /* We use this simplistic scheme for IM. It's proven by
+             real life installations. We can have IM enabled
+            continuesly but this would cause unnecessary latency.
+            Unfortunely we can't use all the NET_RX_* feedback here.
+            This would turn on IM for devices that is not contributing
+            to backlog congestion with unnecessary latency.
+
+             We monitor the device RX-ring and have:
+
+             HW Interrupt Mitigation either ON or OFF.
+
+            ON:  More then 1 pkt received (per intr.) OR we are dropping
+             OFF: Only 1 pkt received
+
+             Note. We only use min and max (0, 15) settings from mit_table */
+
+
+          if( tp->flags &  HAS_INTR_MITIGATION) {
+                 if( received > 1 ) {
+                         if( ! tp->mit_on ) {
+                                 tp->mit_on = 1;
+                                 iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11);
+                         }
+                  }
+                 else {
+                         if( tp->mit_on ) {
+                                 tp->mit_on = 0;
+                                 iowrite32(0, tp->base_addr + CSR11);
+                         }
+                  }
+          }
+
+#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */
+
+         tulip_refill_rx(dev);
+
+         /* If RX ring is not full we are out of memory. */
+         if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+		 goto oom;
+
+         /* Remove us from polling list and enable RX intr. */
+
+         napi_complete(napi);
+         iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7);
+
+         /* The last op happens after poll completion. Which means the following:
+          * 1. it can race with disabling irqs in irq handler
+          * 2. it can race with dise/enabling irqs in other poll threads
+          * 3. if an irq raised after beginning loop, it will be immediately
+          *    triggered here.
+          *
+          * Summarizing: the logic results in some redundant irqs both
+          * due to races in masking and due to too late acking of already
+          * processed irqs. But it must not result in losing events.
+          */
+
+         return work_done;
+
+ not_done:
+         if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 ||
+             tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+                 tulip_refill_rx(dev);
+
+         if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL)
+		 goto oom;
+
+         return work_done;
+
+ oom:    /* Executed with RX ints disabled */
+
+         /* Start timer, stop polling, but do not enable rx interrupts. */
+         mod_timer(&tp->oom_timer, jiffies+1);
+
+         /* Think: timer_pending() was an explicit signature of bug.
+          * Timer can be pending now but fired and completed
+          * before we did napi_complete(). See? We would lose it. */
+
+         /* remove ourselves from the polling list */
+         napi_complete(napi);
+
+         return work_done;
+}
+
+#else /* CONFIG_TULIP_NAPI */
+
+static int tulip_rx(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int entry = tp->cur_rx % RX_RING_SIZE;
+	int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx;
+	int received = 0;
+
+	if (tulip_debug > 4)
+		netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+			   entry, tp->rx_ring[entry].status);
+	/* If we own the next entry, it is a new packet. Send it up. */
+	while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) {
+		s32 status = le32_to_cpu(tp->rx_ring[entry].status);
+		short pkt_len;
+
+		if (tulip_debug > 5)
+			netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n",
+				   entry, status);
+		if (--rx_work_limit < 0)
+			break;
+
+		/*
+		  Omit the four octet CRC from the length.
+		  (May not be considered valid until we have
+		  checked status for RxLengthOver2047 bits)
+		*/
+		pkt_len = ((status >> 16) & 0x7ff) - 4;
+		/*
+		  Maximum pkt_len is 1518 (1514 + vlan header)
+		  Anything higher than this is always invalid
+		  regardless of RxLengthOver2047 bits
+		*/
+
+		if ((status & (RxLengthOver2047 |
+			       RxDescCRCError |
+			       RxDescCollisionSeen |
+			       RxDescRunt |
+			       RxDescDescErr |
+			       RxWholePkt))        != RxWholePkt ||
+		    pkt_len > 1518) {
+			if ((status & (RxLengthOver2047 |
+			     RxWholePkt))         != RxWholePkt) {
+				/* Ingore earlier buffers. */
+				if ((status & 0xffff) != 0x7fff) {
+					if (tulip_debug > 1)
+						netdev_warn(dev,
+							    "Oversized Ethernet frame spanned multiple buffers, status %08x!\n",
+							    status);
+					dev->stats.rx_length_errors++;
+				}
+			} else {
+				/* There was a fatal error. */
+				if (tulip_debug > 2)
+					netdev_dbg(dev, "Receive error, Rx status %08x\n",
+						   status);
+				dev->stats.rx_errors++; /* end of a packet.*/
+				if (pkt_len > 1518 ||
+				    (status & RxDescRunt))
+					dev->stats.rx_length_errors++;
+				if (status & 0x0004)
+					dev->stats.rx_frame_errors++;
+				if (status & 0x0002)
+					dev->stats.rx_crc_errors++;
+				if (status & 0x0001)
+					dev->stats.rx_fifo_errors++;
+			}
+		} else {
+			struct sk_buff *skb;
+
+			/* Check if the packet is long enough to accept without copying
+			   to a minimally-sized skbuff. */
+			if (pkt_len < tulip_rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+				skb_reserve(skb, 2);	/* 16 byte align the IP header */
+				pci_dma_sync_single_for_cpu(tp->pdev,
+							    tp->rx_buffers[entry].mapping,
+							    pkt_len, PCI_DMA_FROMDEVICE);
+#if ! defined(__alpha__)
+				skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
+						 pkt_len);
+				skb_put(skb, pkt_len);
+#else
+				memcpy(skb_put(skb, pkt_len),
+				       tp->rx_buffers[entry].skb->data,
+				       pkt_len);
+#endif
+				pci_dma_sync_single_for_device(tp->pdev,
+							       tp->rx_buffers[entry].mapping,
+							       pkt_len, PCI_DMA_FROMDEVICE);
+			} else { 	/* Pass up the skb already on the Rx ring. */
+				char *temp = skb_put(skb = tp->rx_buffers[entry].skb,
+						     pkt_len);
+
+#ifndef final_version
+				if (tp->rx_buffers[entry].mapping !=
+				    le32_to_cpu(tp->rx_ring[entry].buffer1)) {
+					dev_err(&dev->dev,
+						"Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n",
+						le32_to_cpu(tp->rx_ring[entry].buffer1),
+						(long long)tp->rx_buffers[entry].mapping,
+						skb->head, temp);
+				}
+#endif
+
+				pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
+						 PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+
+				tp->rx_buffers[entry].skb = NULL;
+				tp->rx_buffers[entry].mapping = 0;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+
+			netif_rx(skb);
+
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
+		}
+		received++;
+		entry = (++tp->cur_rx) % RX_RING_SIZE;
+	}
+	return received;
+}
+#endif  /* CONFIG_TULIP_NAPI */
+
+static inline unsigned int phy_interrupt (struct net_device *dev)
+{
+#ifdef __hppa__
+	struct tulip_private *tp = netdev_priv(dev);
+	int csr12 = ioread32(tp->base_addr + CSR12) & 0xff;
+
+	if (csr12 != tp->csr12_shadow) {
+		/* ack interrupt */
+		iowrite32(csr12 | 0x02, tp->base_addr + CSR12);
+		tp->csr12_shadow = csr12;
+		/* do link change stuff */
+		spin_lock(&tp->lock);
+		tulip_check_duplex(dev);
+		spin_unlock(&tp->lock);
+		/* clear irq ack bit */
+		iowrite32(csr12 & ~0x02, tp->base_addr + CSR12);
+
+		return 1;
+	}
+#endif
+
+	return 0;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+irqreturn_t tulip_interrupt(int irq, void *dev_instance)
+{
+	struct net_device *dev = (struct net_device *)dev_instance;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int csr5;
+	int missed;
+	int rx = 0;
+	int tx = 0;
+	int oi = 0;
+	int maxrx = RX_RING_SIZE;
+	int maxtx = TX_RING_SIZE;
+	int maxoi = TX_RING_SIZE;
+#ifdef CONFIG_TULIP_NAPI
+	int rxd = 0;
+#else
+	int entry;
+#endif
+	unsigned int work_count = tulip_max_interrupt_work;
+	unsigned int handled = 0;
+
+	/* Let's see whether the interrupt really is for us */
+	csr5 = ioread32(ioaddr + CSR5);
+
+        if (tp->flags & HAS_PHY_IRQ)
+	        handled = phy_interrupt (dev);
+
+	if ((csr5 & (NormalIntr|AbnormalIntr)) == 0)
+		return IRQ_RETVAL(handled);
+
+	tp->nir++;
+
+	do {
+
+#ifdef CONFIG_TULIP_NAPI
+
+		if (!rxd && (csr5 & (RxIntr | RxNoBuf))) {
+			rxd++;
+			/* Mask RX intrs and add the device to poll list. */
+			iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7);
+			napi_schedule(&tp->napi);
+
+			if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass)))
+                               break;
+		}
+
+               /* Acknowledge the interrupt sources we handle here ASAP
+                  the poll function does Rx and RxNoBuf acking */
+
+		iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5);
+
+#else
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5);
+
+
+		if (csr5 & (RxIntr | RxNoBuf)) {
+				rx += tulip_rx(dev);
+			tulip_refill_rx(dev);
+		}
+
+#endif /*  CONFIG_TULIP_NAPI */
+
+		if (tulip_debug > 4)
+			netdev_dbg(dev, "interrupt  csr5=%#8.8x new csr5=%#8.8x\n",
+				   csr5, ioread32(ioaddr + CSR5));
+
+
+		if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) {
+			unsigned int dirty_tx;
+
+			spin_lock(&tp->lock);
+
+			for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0;
+				 dirty_tx++) {
+				int entry = dirty_tx % TX_RING_SIZE;
+				int status = le32_to_cpu(tp->tx_ring[entry].status);
+
+				if (status < 0)
+					break;			/* It still has not been Txed */
+
+				/* Check for Rx filter setup frames. */
+				if (tp->tx_buffers[entry].skb == NULL) {
+					/* test because dummy frames not mapped */
+					if (tp->tx_buffers[entry].mapping)
+						pci_unmap_single(tp->pdev,
+							 tp->tx_buffers[entry].mapping,
+							 sizeof(tp->setup_frame),
+							 PCI_DMA_TODEVICE);
+					continue;
+				}
+
+				if (status & 0x8000) {
+					/* There was an major error, log it. */
+#ifndef final_version
+					if (tulip_debug > 1)
+						netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+							   status);
+#endif
+					dev->stats.tx_errors++;
+					if (status & 0x4104)
+						dev->stats.tx_aborted_errors++;
+					if (status & 0x0C00)
+						dev->stats.tx_carrier_errors++;
+					if (status & 0x0200)
+						dev->stats.tx_window_errors++;
+					if (status & 0x0002)
+						dev->stats.tx_fifo_errors++;
+					if ((status & 0x0080) && tp->full_duplex == 0)
+						dev->stats.tx_heartbeat_errors++;
+				} else {
+					dev->stats.tx_bytes +=
+						tp->tx_buffers[entry].skb->len;
+					dev->stats.collisions += (status >> 3) & 15;
+					dev->stats.tx_packets++;
+				}
+
+				pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
+						 tp->tx_buffers[entry].skb->len,
+						 PCI_DMA_TODEVICE);
+
+				/* Free the original skb. */
+				dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
+				tp->tx_buffers[entry].skb = NULL;
+				tp->tx_buffers[entry].mapping = 0;
+				tx++;
+			}
+
+#ifndef final_version
+			if (tp->cur_tx - dirty_tx > TX_RING_SIZE) {
+				dev_err(&dev->dev,
+					"Out-of-sync dirty pointer, %d vs. %d\n",
+					dirty_tx, tp->cur_tx);
+				dirty_tx += TX_RING_SIZE;
+			}
+#endif
+
+			if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2)
+				netif_wake_queue(dev);
+
+			tp->dirty_tx = dirty_tx;
+			if (csr5 & TxDied) {
+				if (tulip_debug > 2)
+					dev_warn(&dev->dev,
+						 "The transmitter stopped.  CSR5 is %x, CSR6 %x, new CSR6 %x\n",
+						 csr5, ioread32(ioaddr + CSR6),
+						 tp->csr6);
+				tulip_restart_rxtx(tp);
+			}
+			spin_unlock(&tp->lock);
+		}
+
+		/* Log errors. */
+		if (csr5 & AbnormalIntr) {	/* Abnormal error summary bit. */
+			if (csr5 == 0xffffffff)
+				break;
+			if (csr5 & TxJabber)
+				dev->stats.tx_errors++;
+			if (csr5 & TxFIFOUnderflow) {
+				if ((tp->csr6 & 0xC000) != 0xC000)
+					tp->csr6 += 0x4000;	/* Bump up the Tx threshold */
+				else
+					tp->csr6 |= 0x00200000;  /* Store-n-forward. */
+				/* Restart the transmit process. */
+				tulip_restart_rxtx(tp);
+				iowrite32(0, ioaddr + CSR1);
+			}
+			if (csr5 & (RxDied | RxNoBuf)) {
+				if (tp->flags & COMET_MAC_ADDR) {
+					iowrite32(tp->mc_filter[0], ioaddr + 0xAC);
+					iowrite32(tp->mc_filter[1], ioaddr + 0xB0);
+				}
+			}
+			if (csr5 & RxDied) {		/* Missed a Rx frame. */
+				dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+				dev->stats.rx_errors++;
+				tulip_start_rxtx(tp);
+			}
+			/*
+			 * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this
+			 * call is ever done under the spinlock
+			 */
+			if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) {
+				if (tp->link_change)
+					(tp->link_change)(dev, csr5);
+			}
+			if (csr5 & SystemError) {
+				int error = (csr5 >> 23) & 7;
+				/* oops, we hit a PCI error.  The code produced corresponds
+				 * to the reason:
+				 *  0 - parity error
+				 *  1 - master abort
+				 *  2 - target abort
+				 * Note that on parity error, we should do a software reset
+				 * of the chip to get it back into a sane state (according
+				 * to the 21142/3 docs that is).
+				 *   -- rmk
+				 */
+				dev_err(&dev->dev,
+					"(%lu) System Error occurred (%d)\n",
+					tp->nir, error);
+			}
+			/* Clear all error sources, included undocumented ones! */
+			iowrite32(0x0800f7ba, ioaddr + CSR5);
+			oi++;
+		}
+		if (csr5 & TimerInt) {
+
+			if (tulip_debug > 2)
+				dev_err(&dev->dev,
+					"Re-enabling interrupts, %08x\n",
+					csr5);
+			iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+			tp->ttimer = 0;
+			oi++;
+		}
+		if (tx > maxtx || rx > maxrx || oi > maxoi) {
+			if (tulip_debug > 1)
+				dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n",
+					 csr5, tp->nir, tx, rx, oi);
+
+                       /* Acknowledge all interrupt sources. */
+                        iowrite32(0x8001ffff, ioaddr + CSR5);
+                        if (tp->flags & HAS_INTR_MITIGATION) {
+                     /* Josip Loncaric at ICASE did extensive experimentation
+			to develop a good interrupt mitigation setting.*/
+                                iowrite32(0x8b240000, ioaddr + CSR11);
+                        } else if (tp->chip_id == LC82C168) {
+				/* the LC82C168 doesn't have a hw timer.*/
+				iowrite32(0x00, ioaddr + CSR7);
+				mod_timer(&tp->timer, RUN_AT(HZ/50));
+			} else {
+                          /* Mask all interrupting sources, set timer to
+				re-enable. */
+                                iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7);
+                                iowrite32(0x0012, ioaddr + CSR11);
+                        }
+			break;
+		}
+
+		work_count--;
+		if (work_count == 0)
+			break;
+
+		csr5 = ioread32(ioaddr + CSR5);
+
+#ifdef CONFIG_TULIP_NAPI
+		if (rxd)
+			csr5 &= ~RxPollInt;
+	} while ((csr5 & (TxNoBuf |
+			  TxDied |
+			  TxIntr |
+			  TimerInt |
+			  /* Abnormal intr. */
+			  RxDied |
+			  TxFIFOUnderflow |
+			  TxJabber |
+			  TPLnkFail |
+			  SystemError )) != 0);
+#else
+	} while ((csr5 & (NormalIntr|AbnormalIntr)) != 0);
+
+	tulip_refill_rx(dev);
+
+	/* check if the card is in suspend mode */
+	entry = tp->dirty_rx % RX_RING_SIZE;
+	if (tp->rx_buffers[entry].skb == NULL) {
+		if (tulip_debug > 1)
+			dev_warn(&dev->dev,
+				 "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n",
+				 tp->nir, tp->cur_rx, tp->ttimer, rx);
+		if (tp->chip_id == LC82C168) {
+			iowrite32(0x00, ioaddr + CSR7);
+			mod_timer(&tp->timer, RUN_AT(HZ/50));
+		} else {
+			if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) {
+				if (tulip_debug > 1)
+					dev_warn(&dev->dev,
+						 "in rx suspend mode: (%lu) set timer\n",
+						 tp->nir);
+				iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt,
+					ioaddr + CSR7);
+				iowrite32(TimerInt, ioaddr + CSR5);
+				iowrite32(12, ioaddr + CSR11);
+				tp->ttimer = 1;
+			}
+		}
+	}
+#endif /* CONFIG_TULIP_NAPI */
+
+	if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
+		dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
+	}
+
+	if (tulip_debug > 4)
+		netdev_dbg(dev, "exiting interrupt, csr5=%#04x\n",
+			   ioread32(ioaddr + CSR5));
+
+	return IRQ_HANDLED;
+}
diff --git a/drivers/net/ethernet/dec/tulip/media.c b/drivers/net/ethernet/dec/tulip/media.c
new file mode 100644
index 000000000000..beeb17b52ad4
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/media.c
@@ -0,0 +1,553 @@
+/*
+	drivers/net/tulip/media.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "tulip.h"
+
+
+/* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+   "overclocking" issues or future 66Mhz PCI. */
+#define mdio_delay() ioread32(mdio_addr)
+
+/* Read and write the MII registers using software-generated serial
+   MDIO protocol.  It is just different enough from the EEPROM protocol
+   to not share code.  The maxium data clock rate is 2.5 Mhz. */
+#define MDIO_SHIFT_CLK		0x10000
+#define MDIO_DATA_WRITE0	0x00000
+#define MDIO_DATA_WRITE1	0x20000
+#define MDIO_ENB		0x00000 /* Ignore the 0x02000 databook setting. */
+#define MDIO_ENB_IN		0x40000
+#define MDIO_DATA_READ		0x80000
+
+static const unsigned char comet_miireg2offset[32] = {
+	0xB4, 0xB8, 0xBC, 0xC0,  0xC4, 0xC8, 0xCC, 0,  0,0,0,0,  0,0,0,0,
+	0,0xD0,0,0,  0,0,0,0,  0,0,0,0, 0, 0xD4, 0xD8, 0xDC, };
+
+
+/* MII transceiver control section.
+   Read and write the MII registers using software-generated serial
+   MDIO protocol.
+   See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions")
+   or DP83840A data sheet for more details.
+   */
+
+int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int i;
+	int read_cmd = (0xf6 << 10) | ((phy_id & 0x1f) << 5) | location;
+	int retval = 0;
+	void __iomem *ioaddr = tp->base_addr;
+	void __iomem *mdio_addr = ioaddr + CSR9;
+	unsigned long flags;
+
+	if (location & ~0x1f)
+		return 0xffff;
+
+	if (tp->chip_id == COMET  &&  phy_id == 30) {
+		if (comet_miireg2offset[location])
+			return ioread32(ioaddr + comet_miireg2offset[location]);
+		return 0xffff;
+	}
+
+	spin_lock_irqsave(&tp->mii_lock, flags);
+	if (tp->chip_id == LC82C168) {
+		iowrite32(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0);
+		ioread32(ioaddr + 0xA0);
+		ioread32(ioaddr + 0xA0);
+		for (i = 1000; i >= 0; --i) {
+			barrier();
+			if ( ! ((retval = ioread32(ioaddr + 0xA0)) & 0x80000000))
+				break;
+		}
+		spin_unlock_irqrestore(&tp->mii_lock, flags);
+		return retval & 0xffff;
+	}
+
+	/* Establish sync by sending at least 32 logic ones. */
+	for (i = 32; i >= 0; i--) {
+		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
+		mdio_delay();
+		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
+
+		iowrite32(MDIO_ENB | dataval, mdio_addr);
+		mdio_delay();
+		iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		iowrite32(MDIO_ENB_IN, mdio_addr);
+		mdio_delay();
+		retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+		iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+
+	spin_unlock_irqrestore(&tp->mii_lock, flags);
+	return (retval>>1) & 0xffff;
+}
+
+void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int i;
+	int cmd = (0x5002 << 16) | ((phy_id & 0x1f) << 23) | (location<<18) | (val & 0xffff);
+	void __iomem *ioaddr = tp->base_addr;
+	void __iomem *mdio_addr = ioaddr + CSR9;
+	unsigned long flags;
+
+	if (location & ~0x1f)
+		return;
+
+	if (tp->chip_id == COMET && phy_id == 30) {
+		if (comet_miireg2offset[location])
+			iowrite32(val, ioaddr + comet_miireg2offset[location]);
+		return;
+	}
+
+	spin_lock_irqsave(&tp->mii_lock, flags);
+	if (tp->chip_id == LC82C168) {
+		iowrite32(cmd, ioaddr + 0xA0);
+		for (i = 1000; i >= 0; --i) {
+			barrier();
+			if ( ! (ioread32(ioaddr + 0xA0) & 0x80000000))
+				break;
+		}
+		spin_unlock_irqrestore(&tp->mii_lock, flags);
+		return;
+	}
+
+	/* Establish sync by sending 32 logic ones. */
+	for (i = 32; i >= 0; i--) {
+		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
+		mdio_delay();
+		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
+		iowrite32(MDIO_ENB | dataval, mdio_addr);
+		mdio_delay();
+		iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		iowrite32(MDIO_ENB_IN, mdio_addr);
+		mdio_delay();
+		iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+		mdio_delay();
+	}
+
+	spin_unlock_irqrestore(&tp->mii_lock, flags);
+}
+
+
+/* Set up the transceiver control registers for the selected media type. */
+void tulip_select_media(struct net_device *dev, int startup)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	struct mediatable *mtable = tp->mtable;
+	u32 new_csr6;
+	int i;
+
+	if (mtable) {
+		struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index];
+		unsigned char *p = mleaf->leafdata;
+		switch (mleaf->type) {
+		case 0:					/* 21140 non-MII xcvr. */
+			if (tulip_debug > 1)
+				netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n",
+					   p[1]);
+			dev->if_port = p[0];
+			if (startup)
+				iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
+			iowrite32(p[1], ioaddr + CSR12);
+			new_csr6 = 0x02000000 | ((p[2] & 0x71) << 18);
+			break;
+		case 2: case 4: {
+			u16 setup[5];
+			u32 csr13val, csr14val, csr15dir, csr15val;
+			for (i = 0; i < 5; i++)
+				setup[i] = get_u16(&p[i*2 + 1]);
+
+			dev->if_port = p[0] & MEDIA_MASK;
+			if (tulip_media_cap[dev->if_port] & MediaAlwaysFD)
+				tp->full_duplex = 1;
+
+			if (startup && mtable->has_reset) {
+				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
+				unsigned char *rst = rleaf->leafdata;
+				if (tulip_debug > 1)
+					netdev_dbg(dev, "Resetting the transceiver\n");
+				for (i = 0; i < rst[0]; i++)
+					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
+			}
+			if (tulip_debug > 1)
+				netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n",
+					   medianame[dev->if_port],
+					   setup[0], setup[1]);
+			if (p[0] & 0x40) {	/* SIA (CSR13-15) setup values are provided. */
+				csr13val = setup[0];
+				csr14val = setup[1];
+				csr15dir = (setup[3]<<16) | setup[2];
+				csr15val = (setup[4]<<16) | setup[2];
+				iowrite32(0, ioaddr + CSR13);
+				iowrite32(csr14val, ioaddr + CSR14);
+				iowrite32(csr15dir, ioaddr + CSR15);	/* Direction */
+				iowrite32(csr15val, ioaddr + CSR15);	/* Data */
+				iowrite32(csr13val, ioaddr + CSR13);
+			} else {
+				csr13val = 1;
+				csr14val = 0;
+				csr15dir = (setup[0]<<16) | 0x0008;
+				csr15val = (setup[1]<<16) | 0x0008;
+				if (dev->if_port <= 4)
+					csr14val = t21142_csr14[dev->if_port];
+				if (startup) {
+					iowrite32(0, ioaddr + CSR13);
+					iowrite32(csr14val, ioaddr + CSR14);
+				}
+				iowrite32(csr15dir, ioaddr + CSR15);	/* Direction */
+				iowrite32(csr15val, ioaddr + CSR15);	/* Data */
+				if (startup) iowrite32(csr13val, ioaddr + CSR13);
+			}
+			if (tulip_debug > 1)
+				netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n",
+					   csr15dir, csr15val);
+			if (mleaf->type == 4)
+				new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
+			else
+				new_csr6 = 0x82420000;
+			break;
+		}
+		case 1: case 3: {
+			int phy_num = p[0];
+			int init_length = p[1];
+			u16 *misc_info, tmp_info;
+
+			dev->if_port = 11;
+			new_csr6 = 0x020E0000;
+			if (mleaf->type == 3) {	/* 21142 */
+				u16 *init_sequence = (u16*)(p+2);
+				u16 *reset_sequence = &((u16*)(p+3))[init_length];
+				int reset_length = p[2 + init_length*2];
+				misc_info = reset_sequence + reset_length;
+				if (startup) {
+					int timeout = 10;	/* max 1 ms */
+					for (i = 0; i < reset_length; i++)
+						iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
+
+					/* flush posted writes */
+					ioread32(ioaddr + CSR15);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					udelay(500);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						udelay(100);
+				}
+				for (i = 0; i < init_length; i++)
+					iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
+
+				ioread32(ioaddr + CSR15);	/* flush posted writes */
+			} else {
+				u8 *init_sequence = p + 2;
+				u8 *reset_sequence = p + 3 + init_length;
+				int reset_length = p[2 + init_length];
+				misc_info = (u16*)(reset_sequence + reset_length);
+				if (startup) {
+					int timeout = 10;	/* max 1 ms */
+					iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
+					for (i = 0; i < reset_length; i++)
+						iowrite32(reset_sequence[i], ioaddr + CSR12);
+
+					/* flush posted writes */
+					ioread32(ioaddr + CSR12);
+
+					/* Sect 3.10.3 in DP83840A.pdf (p39) */
+					udelay(500);
+
+					/* Section 4.2 in DP83840A.pdf (p43) */
+					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
+					while (timeout-- &&
+						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
+						udelay(100);
+				}
+				for (i = 0; i < init_length; i++)
+					iowrite32(init_sequence[i], ioaddr + CSR12);
+
+				ioread32(ioaddr + CSR12);	/* flush posted writes */
+			}
+
+			tmp_info = get_u16(&misc_info[1]);
+			if (tmp_info)
+				tp->advertising[phy_num] = tmp_info | 1;
+			if (tmp_info && startup < 2) {
+				if (tp->mii_advertise == 0)
+					tp->mii_advertise = tp->advertising[phy_num];
+				if (tulip_debug > 1)
+					netdev_dbg(dev, " Advertising %04x on MII %d\n",
+						   tp->mii_advertise,
+						   tp->phys[phy_num]);
+				tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
+			}
+			break;
+		}
+		case 5: case 6: {
+			u16 setup[5];
+
+			new_csr6 = 0; /* FIXME */
+
+			for (i = 0; i < 5; i++)
+				setup[i] = get_u16(&p[i*2 + 1]);
+
+			if (startup && mtable->has_reset) {
+				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
+				unsigned char *rst = rleaf->leafdata;
+				if (tulip_debug > 1)
+					netdev_dbg(dev, "Resetting the transceiver\n");
+				for (i = 0; i < rst[0]; i++)
+					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
+			}
+
+			break;
+		}
+		default:
+			netdev_dbg(dev, " Invalid media table selection %d\n",
+				   mleaf->type);
+			new_csr6 = 0x020E0000;
+		}
+		if (tulip_debug > 1)
+			netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n",
+				   medianame[dev->if_port],
+				   ioread32(ioaddr + CSR12) & 0xff);
+	} else if (tp->chip_id == LC82C168) {
+		if (startup && ! tp->medialock)
+			dev->if_port = tp->mii_cnt ? 11 : 0;
+		if (tulip_debug > 1)
+			netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n",
+				   ioread32(ioaddr + 0xB8),
+				   medianame[dev->if_port]);
+		if (tp->mii_cnt) {
+			new_csr6 = 0x810C0000;
+			iowrite32(0x0001, ioaddr + CSR15);
+			iowrite32(0x0201B07A, ioaddr + 0xB8);
+		} else if (startup) {
+			/* Start with 10mbps to do autonegotiation. */
+			iowrite32(0x32, ioaddr + CSR12);
+			new_csr6 = 0x00420000;
+			iowrite32(0x0001B078, ioaddr + 0xB8);
+			iowrite32(0x0201B078, ioaddr + 0xB8);
+		} else if (dev->if_port == 3  ||  dev->if_port == 5) {
+			iowrite32(0x33, ioaddr + CSR12);
+			new_csr6 = 0x01860000;
+			/* Trigger autonegotiation. */
+			iowrite32(startup ? 0x0201F868 : 0x0001F868, ioaddr + 0xB8);
+		} else {
+			iowrite32(0x32, ioaddr + CSR12);
+			new_csr6 = 0x00420000;
+			iowrite32(0x1F078, ioaddr + 0xB8);
+		}
+	} else {					/* Unknown chip type with no media table. */
+		if (tp->default_port == 0)
+			dev->if_port = tp->mii_cnt ? 11 : 3;
+		if (tulip_media_cap[dev->if_port] & MediaIsMII) {
+			new_csr6 = 0x020E0000;
+		} else if (tulip_media_cap[dev->if_port] & MediaIsFx) {
+			new_csr6 = 0x02860000;
+		} else
+			new_csr6 = 0x03860000;
+		if (tulip_debug > 1)
+			netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n",
+				   medianame[dev->if_port],
+				   ioread32(ioaddr + CSR12));
+	}
+
+	tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
+
+	mdelay(1);
+}
+
+/*
+  Check the MII negotiated duplex and change the CSR6 setting if
+  required.
+  Return 0 if everything is OK.
+  Return < 0 if the transceiver is missing or has no link beat.
+  */
+int tulip_check_duplex(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	unsigned int bmsr, lpa, negotiated, new_csr6;
+
+	bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
+	lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA);
+	if (tulip_debug > 1)
+		dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n",
+			 bmsr, lpa);
+	if (bmsr == 0xffff)
+		return -2;
+	if ((bmsr & BMSR_LSTATUS) == 0) {
+		int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
+		if ((new_bmsr & BMSR_LSTATUS) == 0) {
+			if (tulip_debug  > 1)
+				dev_info(&dev->dev,
+					 "No link beat on the MII interface, status %04x\n",
+					 new_bmsr);
+			return -1;
+		}
+	}
+	negotiated = lpa & tp->advertising[0];
+	tp->full_duplex = mii_duplex(tp->full_duplex_lock, negotiated);
+
+	new_csr6 = tp->csr6;
+
+	if (negotiated & LPA_100) new_csr6 &= ~TxThreshold;
+	else			  new_csr6 |= TxThreshold;
+	if (tp->full_duplex) new_csr6 |= FullDuplex;
+	else		     new_csr6 &= ~FullDuplex;
+
+	if (new_csr6 != tp->csr6) {
+		tp->csr6 = new_csr6;
+		tulip_restart_rxtx(tp);
+
+		if (tulip_debug > 0)
+			dev_info(&dev->dev,
+				 "Setting %s-duplex based on MII#%d link partner capability of %04x\n",
+				 tp->full_duplex ? "full" : "half",
+				 tp->phys[0], lpa);
+		return 1;
+	}
+
+	return 0;
+}
+
+void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int phyn, phy_idx = 0;
+	int mii_reg0;
+	int mii_advert;
+	unsigned int to_advert, new_bmcr, ane_switch;
+
+	/* Find the connected MII xcvrs.
+	   Doing this in open() would allow detecting external xcvrs later,
+	   but takes much time. */
+	for (phyn = 1; phyn <= 32 && phy_idx < sizeof (tp->phys); phyn++) {
+		int phy = phyn & 0x1f;
+		int mii_status = tulip_mdio_read (dev, phy, MII_BMSR);
+		if ((mii_status & 0x8301) == 0x8001 ||
+		    ((mii_status & BMSR_100BASE4) == 0 &&
+		     (mii_status & 0x7800) != 0)) {
+			/* preserve Becker logic, gain indentation level */
+		} else {
+			continue;
+		}
+
+		mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR);
+		mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE);
+		ane_switch = 0;
+
+		/* if not advertising at all, gen an
+		 * advertising value from the capability
+		 * bits in BMSR
+		 */
+		if ((mii_advert & ADVERTISE_ALL) == 0) {
+			unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR);
+			mii_advert = ((tmpadv >> 6) & 0x3e0) | 1;
+		}
+
+		if (tp->mii_advertise) {
+			tp->advertising[phy_idx] =
+			to_advert = tp->mii_advertise;
+		} else if (tp->advertising[phy_idx]) {
+			to_advert = tp->advertising[phy_idx];
+		} else {
+			tp->advertising[phy_idx] =
+			tp->mii_advertise =
+			to_advert = mii_advert;
+		}
+
+		tp->phys[phy_idx++] = phy;
+
+		pr_info("tulip%d:  MII transceiver #%d config %04x status %04x advertising %04x\n",
+			board_idx, phy, mii_reg0, mii_status, mii_advert);
+
+		/* Fixup for DLink with miswired PHY. */
+		if (mii_advert != to_advert) {
+			pr_debug("tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
+				 board_idx, to_advert, phy, mii_advert);
+			tulip_mdio_write (dev, phy, 4, to_advert);
+		}
+
+		/* Enable autonegotiation: some boards default to off. */
+		if (tp->default_port == 0) {
+			new_bmcr = mii_reg0 | BMCR_ANENABLE;
+			if (new_bmcr != mii_reg0) {
+				new_bmcr |= BMCR_ANRESTART;
+				ane_switch = 1;
+			}
+		}
+		/* ...or disable nway, if forcing media */
+		else {
+			new_bmcr = mii_reg0 & ~BMCR_ANENABLE;
+			if (new_bmcr != mii_reg0)
+				ane_switch = 1;
+		}
+
+		/* clear out bits we never want at this point */
+		new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE |
+			      BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK |
+			      BMCR_RESET);
+
+		if (tp->full_duplex)
+			new_bmcr |= BMCR_FULLDPLX;
+		if (tulip_media_cap[tp->default_port] & MediaIs100)
+			new_bmcr |= BMCR_SPEED100;
+
+		if (new_bmcr != mii_reg0) {
+			/* some phys need the ANE switch to
+			 * happen before forced media settings
+			 * will "take."  However, we write the
+			 * same value twice in order not to
+			 * confuse the sane phys.
+			 */
+			if (ane_switch) {
+				tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
+				udelay (10);
+			}
+			tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
+		}
+	}
+	tp->mii_cnt = phy_idx;
+	if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
+		pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n",
+			board_idx);
+		tp->phys[0] = 1;
+	}
+}
diff --git a/drivers/net/ethernet/dec/tulip/pnic.c b/drivers/net/ethernet/dec/tulip/pnic.c
new file mode 100644
index 000000000000..9c16e4ad02a6
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/pnic.c
@@ -0,0 +1,170 @@
+/*
+	drivers/net/tulip/pnic.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include "tulip.h"
+
+
+void pnic_do_nway(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	u32 phy_reg = ioread32(ioaddr + 0xB8);
+	u32 new_csr6 = tp->csr6 & ~0x40C40200;
+
+	if (phy_reg & 0x78000000) { /* Ignore baseT4 */
+		if (phy_reg & 0x20000000)		dev->if_port = 5;
+		else if (phy_reg & 0x40000000)	dev->if_port = 3;
+		else if (phy_reg & 0x10000000)	dev->if_port = 4;
+		else if (phy_reg & 0x08000000)	dev->if_port = 0;
+		tp->nwayset = 1;
+		new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000;
+		iowrite32(0x32 | (dev->if_port & 1), ioaddr + CSR12);
+		if (dev->if_port & 1)
+			iowrite32(0x1F868, ioaddr + 0xB8);
+		if (phy_reg & 0x30000000) {
+			tp->full_duplex = 1;
+			new_csr6 |= 0x00000200;
+		}
+		if (tulip_debug > 1)
+			netdev_dbg(dev, "PNIC autonegotiated status %08x, %s\n",
+				   phy_reg, medianame[dev->if_port]);
+		if (tp->csr6 != new_csr6) {
+			tp->csr6 = new_csr6;
+			/* Restart Tx */
+			tulip_restart_rxtx(tp);
+			dev->trans_start = jiffies;
+		}
+	}
+}
+
+void pnic_lnk_change(struct net_device *dev, int csr5)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int phy_reg = ioread32(ioaddr + 0xB8);
+
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "PNIC link changed state %08x, CSR5 %08x\n",
+			   phy_reg, csr5);
+	if (ioread32(ioaddr + CSR5) & TPLnkFail) {
+		iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
+		/* If we use an external MII, then we mustn't use the
+		 * internal negotiation.
+		 */
+		if (tulip_media_cap[dev->if_port] & MediaIsMII)
+			return;
+		if (! tp->nwayset || time_after(jiffies, dev_trans_start(dev) + 1*HZ)) {
+			tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff);
+			iowrite32(tp->csr6, ioaddr + CSR6);
+			iowrite32(0x30, ioaddr + CSR12);
+			iowrite32(0x0201F078, ioaddr + 0xB8); /* Turn on autonegotiation. */
+			dev->trans_start = jiffies;
+		}
+	} else if (ioread32(ioaddr + CSR5) & TPLnkPass) {
+		if (tulip_media_cap[dev->if_port] & MediaIsMII) {
+			spin_lock(&tp->lock);
+			tulip_check_duplex(dev);
+			spin_unlock(&tp->lock);
+		} else {
+			pnic_do_nway(dev);
+		}
+		iowrite32((ioread32(ioaddr + CSR7) & ~TPLnkPass) | TPLnkFail, ioaddr + CSR7);
+	}
+}
+
+void pnic_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int next_tick = 60*HZ;
+
+	if(!ioread32(ioaddr + CSR7)) {
+		/* the timer was called due to a work overflow
+		 * in the interrupt handler. Skip the connection
+		 * checks, the nic is definitively speaking with
+		 * his link partner.
+		 */
+		goto too_good_connection;
+	}
+
+	if (tulip_media_cap[dev->if_port] & MediaIsMII) {
+		spin_lock_irq(&tp->lock);
+		if (tulip_check_duplex(dev) > 0)
+			next_tick = 3*HZ;
+		spin_unlock_irq(&tp->lock);
+	} else {
+		int csr12 = ioread32(ioaddr + CSR12);
+		int new_csr6 = tp->csr6 & ~0x40C40200;
+		int phy_reg = ioread32(ioaddr + 0xB8);
+		int csr5 = ioread32(ioaddr + CSR5);
+
+		if (tulip_debug > 1)
+			netdev_dbg(dev, "PNIC timer PHY status %08x, %s CSR5 %08x\n",
+				   phy_reg, medianame[dev->if_port], csr5);
+		if (phy_reg & 0x04000000) {	/* Remote link fault */
+			iowrite32(0x0201F078, ioaddr + 0xB8);
+			next_tick = 1*HZ;
+			tp->nwayset = 0;
+		} else if (phy_reg & 0x78000000) { /* Ignore baseT4 */
+			pnic_do_nway(dev);
+			next_tick = 60*HZ;
+		} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
+			if (tulip_debug > 1)
+				netdev_dbg(dev, "%s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n",
+					   medianame[dev->if_port],
+					   csr12,
+					   ioread32(ioaddr + CSR5),
+					   ioread32(ioaddr + 0xB8));
+			next_tick = 3*HZ;
+			if (tp->medialock) {
+			} else if (tp->nwayset  &&  (dev->if_port & 1)) {
+				next_tick = 1*HZ;
+			} else if (dev->if_port == 0) {
+				dev->if_port = 3;
+				iowrite32(0x33, ioaddr + CSR12);
+				new_csr6 = 0x01860000;
+				iowrite32(0x1F868, ioaddr + 0xB8);
+			} else {
+				dev->if_port = 0;
+				iowrite32(0x32, ioaddr + CSR12);
+				new_csr6 = 0x00420000;
+				iowrite32(0x1F078, ioaddr + 0xB8);
+			}
+			if (tp->csr6 != new_csr6) {
+				tp->csr6 = new_csr6;
+				/* Restart Tx */
+				tulip_restart_rxtx(tp);
+				dev->trans_start = jiffies;
+				if (tulip_debug > 1)
+					dev_info(&dev->dev,
+						 "Changing PNIC configuration to %s %s-duplex, CSR6 %08x\n",
+						 medianame[dev->if_port],
+						 tp->full_duplex ? "full" : "half",
+						 new_csr6);
+			}
+		}
+	}
+too_good_connection:
+	mod_timer(&tp->timer, RUN_AT(next_tick));
+	if(!ioread32(ioaddr + CSR7)) {
+		if (tulip_debug > 1)
+			dev_info(&dev->dev, "sw timer wakeup\n");
+		disable_irq(dev->irq);
+		tulip_refill_rx(dev);
+		enable_irq(dev->irq);
+		iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+	}
+}
diff --git a/drivers/net/ethernet/dec/tulip/pnic2.c b/drivers/net/ethernet/dec/tulip/pnic2.c
new file mode 100644
index 000000000000..04a7e477eaff
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/pnic2.c
@@ -0,0 +1,403 @@
+/*
+	drivers/net/tulip/pnic2.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+        Modified to hep support PNIC_II by Kevin B. Hendricks
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+        Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+
+/* Understanding the PNIC_II - everything is this file is based
+ * on the PNIC_II_PDF datasheet which is sorely lacking in detail
+ *
+ * As I understand things, here are the registers and bits that
+ * explain the masks and constants used in this file that are
+ * either different from the 21142/3 or important for basic operation.
+ *
+ *
+ * CSR 6  (mask = 0xfe3bd1fd of bits not to change)
+ * -----
+ * Bit 24    - SCR
+ * Bit 23    - PCS
+ * Bit 22    - TTM (Trasmit Threshold Mode)
+ * Bit 18    - Port Select
+ * Bit 13    - Start - 1, Stop - 0 Transmissions
+ * Bit 11:10 - Loop Back Operation Mode
+ * Bit 9     - Full Duplex mode (Advertise 10BaseT-FD is CSR14<7> is set)
+ * Bit 1     - Start - 1, Stop - 0 Receive
+ *
+ *
+ * CSR 14  (mask = 0xfff0ee39 of bits not to change)
+ * ------
+ * Bit 19    - PAUSE-Pause
+ * Bit 18    - Advertise T4
+ * Bit 17    - Advertise 100baseTx-FD
+ * Bit 16    - Advertise 100baseTx-HD
+ * Bit 12    - LTE - Link Test Enable
+ * Bit 7     - ANE - Auto Negotiate Enable
+ * Bit 6     - HDE - Advertise 10baseT-HD
+ * Bit 2     - Reset to Power down - kept as 1 for normal operation
+ * Bit 1     -  Loop Back enable for 10baseT MCC
+ *
+ *
+ * CSR 12
+ * ------
+ * Bit 25    - Partner can do T4
+ * Bit 24    - Partner can do 100baseTx-FD
+ * Bit 23    - Partner can do 100baseTx-HD
+ * Bit 22    - Partner can do 10baseT-FD
+ * Bit 21    - Partner can do 10baseT-HD
+ * Bit 15    - LPN is 1 if all above bits are valid other wise 0
+ * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate)
+ * Bit 3     - Autopolarity state
+ * Bit 2     - LS10B - link state of 10baseT 0 - good, 1 - failed
+ * Bit 1     - LS100B - link state of 100baseT 0 - good, 1 - failed
+ *
+ *
+ * Data Port Selection Info
+ *-------------------------
+ *
+ * CSR14<7>   CSR6<18>    CSR6<22>    CSR6<23>    CSR6<24>   MODE/PORT
+ *   1           0           0 (X)       0 (X)       1        NWAY
+ *   0           0           1           0 (X)       0        10baseT
+ *   0           1           0           1           1 (X)    100baseT
+ *
+ *
+ */
+
+
+
+#include "tulip.h"
+#include <linux/delay.h>
+
+
+void pnic2_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int next_tick = 60*HZ;
+
+	if (tulip_debug > 3)
+		dev_info(&dev->dev, "PNIC2 negotiation status %08x\n",
+			 ioread32(ioaddr + CSR12));
+
+	if (next_tick) {
+		mod_timer(&tp->timer, RUN_AT(next_tick));
+	}
+}
+
+
+void pnic2_start_nway(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+        int csr14;
+        int csr12;
+
+        /* set up what to advertise during the negotiation */
+
+        /* load in csr14  and mask off bits not to touch
+         * comment at top of file explains mask value
+         */
+	csr14 = (ioread32(ioaddr + CSR14) & 0xfff0ee39);
+
+        /* bit 17 - advetise 100baseTx-FD */
+        if (tp->sym_advertise & 0x0100) csr14 |= 0x00020000;
+
+        /* bit 16 - advertise 100baseTx-HD */
+        if (tp->sym_advertise & 0x0080) csr14 |= 0x00010000;
+
+        /* bit 6 - advertise 10baseT-HD */
+        if (tp->sym_advertise & 0x0020) csr14 |= 0x00000040;
+
+        /* Now set bit 12 Link Test Enable, Bit 7 Autonegotiation Enable
+         * and bit 0 Don't PowerDown 10baseT
+         */
+        csr14 |= 0x00001184;
+
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "Restarting PNIC2 autonegotiation, csr14=%08x\n",
+			   csr14);
+
+        /* tell pnic2_lnk_change we are doing an nway negotiation */
+	dev->if_port = 0;
+	tp->nway = tp->mediasense = 1;
+	tp->nwayset = tp->lpar = 0;
+
+        /* now we have to set up csr6 for NWAY state */
+
+	tp->csr6 = ioread32(ioaddr + CSR6);
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "On Entry to Nway, csr6=%08x\n", tp->csr6);
+
+        /* mask off any bits not to touch
+         * comment at top of file explains mask value
+         */
+	tp->csr6 = tp->csr6 & 0xfe3bd1fd;
+
+        /* don't forget that bit 9 is also used for advertising */
+        /* advertise 10baseT-FD for the negotiation (bit 9) */
+        if (tp->sym_advertise & 0x0040) tp->csr6 |= 0x00000200;
+
+        /* set bit 24 for nway negotiation mode ...
+         * see Data Port Selection comment at top of file
+         * and "Stop" - reset both Transmit (bit 13) and Receive (bit 1)
+         */
+        tp->csr6 |= 0x01000000;
+	iowrite32(csr14, ioaddr + CSR14);
+	iowrite32(tp->csr6, ioaddr + CSR6);
+        udelay(100);
+
+        /* all set up so now force the negotiation to begin */
+
+        /* read in current values and mask off all but the
+	 * Autonegotiation bits 14:12.  Writing a 001 to those bits
+         * should start the autonegotiation
+         */
+        csr12 = (ioread32(ioaddr + CSR12) & 0xffff8fff);
+        csr12 |= 0x1000;
+	iowrite32(csr12, ioaddr + CSR12);
+}
+
+
+
+void pnic2_lnk_change(struct net_device *dev, int csr5)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+        int csr14;
+
+        /* read the staus register to find out what is up */
+	int csr12 = ioread32(ioaddr + CSR12);
+
+	if (tulip_debug > 1)
+		dev_info(&dev->dev,
+			 "PNIC2 link status interrupt %08x,  CSR5 %x, %08x\n",
+			 csr12, csr5, ioread32(ioaddr + CSR14));
+
+	/* If NWay finished and we have a negotiated partner capability.
+         * check bits 14:12 for bit pattern 101 - all is good
+         */
+	if (tp->nway  &&  !tp->nwayset) {
+
+	        /* we did an auto negotiation */
+
+                if ((csr12 & 0x7000) == 0x5000) {
+
+	               /* negotiation ended successfully */
+
+	               /* get the link partners reply and mask out all but
+                        * bits 24-21 which show the partners capabilities
+                        * and match those to what we advertised
+                        *
+                        * then begin to interpret the results of the negotiation.
+                        * Always go in this order : (we are ignoring T4 for now)
+                        *     100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD
+                        */
+
+		        int negotiated = ((csr12 >> 16) & 0x01E0) & tp->sym_advertise;
+		        tp->lpar = (csr12 >> 16);
+		        tp->nwayset = 1;
+
+                        if (negotiated & 0x0100)        dev->if_port = 5;
+		        else if (negotiated & 0x0080)	dev->if_port = 3;
+		        else if (negotiated & 0x0040)	dev->if_port = 4;
+			else if (negotiated & 0x0020)	dev->if_port = 0;
+			else {
+			     if (tulip_debug > 1)
+				     dev_info(&dev->dev,
+					      "funny autonegotiate result csr12 %08x advertising %04x\n",
+					      csr12, tp->sym_advertise);
+			     tp->nwayset = 0;
+			     /* so check  if 100baseTx link state is okay */
+			     if ((csr12 & 2) == 0  &&  (tp->sym_advertise & 0x0180))
+			       dev->if_port = 3;
+			}
+
+			/* now record the duplex that was negotiated */
+			tp->full_duplex = 0;
+			if ((dev->if_port == 4) || (dev->if_port == 5))
+			       tp->full_duplex = 1;
+
+			if (tulip_debug > 1) {
+			       if (tp->nwayset)
+				       dev_info(&dev->dev,
+						"Switching to %s based on link negotiation %04x & %04x = %04x\n",
+						medianame[dev->if_port],
+						tp->sym_advertise, tp->lpar,
+						negotiated);
+			}
+
+                        /* remember to turn off bit 7 - autonegotiate
+                         * enable so we can properly end nway mode and
+                         * set duplex (ie. use csr6<9> again)
+                         */
+	                csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f);
+                        iowrite32(csr14,ioaddr + CSR14);
+
+
+                        /* now set the data port and operating mode
+			 * (see the Data Port Selection comments at
+			 * the top of the file
+			 */
+
+			/* get current csr6 and mask off bits not to touch */
+			/* see comment at top of file */
+
+			tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd);
+
+			/* so if using if_port 3 or 5 then select the 100baseT
+			 * port else select the 10baseT port.
+			 * See the Data Port Selection table at the top
+			 * of the file which was taken from the PNIC_II.PDF
+			 * datasheet
+			 */
+			if (dev->if_port & 1) tp->csr6 |= 0x01840000;
+			else tp->csr6 |= 0x00400000;
+
+			/* now set the full duplex bit appropriately */
+			if (tp->full_duplex) tp->csr6 |= 0x00000200;
+
+			iowrite32(1, ioaddr + CSR13);
+
+			if (tulip_debug > 2)
+				netdev_dbg(dev, "Setting CSR6 %08x/%x CSR12 %08x\n",
+					   tp->csr6,
+					   ioread32(ioaddr + CSR6),
+					   ioread32(ioaddr + CSR12));
+
+			/* now the following actually writes out the
+			 * new csr6 values
+			 */
+			tulip_start_rxtx(tp);
+
+                        return;
+
+	        } else {
+	                dev_info(&dev->dev,
+				 "Autonegotiation failed, using %s, link beat status %04x\n",
+				 medianame[dev->if_port], csr12);
+
+                        /* remember to turn off bit 7 - autonegotiate
+                         * enable so we don't forget
+                         */
+	                csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f);
+                        iowrite32(csr14,ioaddr + CSR14);
+
+                        /* what should we do when autonegotiate fails?
+                         * should we try again or default to baseline
+                         * case.  I just don't know.
+                         *
+                         * for now default to some baseline case
+                         */
+
+	                 dev->if_port = 0;
+                         tp->nway = 0;
+                         tp->nwayset = 1;
+
+                         /* set to 10baseTx-HD - see Data Port Selection
+                          * comment given at the top of the file
+                          */
+	                 tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd);
+                         tp->csr6 |= 0x00400000;
+
+	                 tulip_restart_rxtx(tp);
+
+                         return;
+
+		}
+	}
+
+	if ((tp->nwayset  &&  (csr5 & 0x08000000) &&
+	     (dev->if_port == 3  ||  dev->if_port == 5) &&
+	     (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) {
+
+		/* Link blew? Maybe restart NWay. */
+
+		if (tulip_debug > 2)
+			netdev_dbg(dev, "Ugh! Link blew?\n");
+
+		del_timer_sync(&tp->timer);
+		pnic2_start_nway(dev);
+		tp->timer.expires = RUN_AT(3*HZ);
+		add_timer(&tp->timer);
+
+                return;
+	}
+
+
+        if (dev->if_port == 3  ||  dev->if_port == 5) {
+
+	        /* we are at 100mb and a potential link change occurred */
+
+		if (tulip_debug > 1)
+			dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+				 medianame[dev->if_port],
+				 (csr12 & 2) ? "failed" : "good");
+
+                /* check 100 link beat */
+
+                tp->nway = 0;
+                tp->nwayset = 1;
+
+                /* if failed then try doing an nway to get in sync */
+		if ((csr12 & 2)  &&  ! tp->medialock) {
+			del_timer_sync(&tp->timer);
+			pnic2_start_nway(dev);
+			tp->timer.expires = RUN_AT(3*HZ);
+       			add_timer(&tp->timer);
+                }
+
+                return;
+        }
+
+	if (dev->if_port == 0  ||  dev->if_port == 4) {
+
+	        /* we are at 10mb and a potential link change occurred */
+
+		if (tulip_debug > 1)
+			dev_info(&dev->dev, "PNIC2 %s link beat %s\n",
+				 medianame[dev->if_port],
+				 (csr12 & 4) ? "failed" : "good");
+
+
+                tp->nway = 0;
+                tp->nwayset = 1;
+
+                /* if failed, try doing an nway to get in sync */
+		if ((csr12 & 4)  &&  ! tp->medialock) {
+			del_timer_sync(&tp->timer);
+			pnic2_start_nway(dev);
+			tp->timer.expires = RUN_AT(3*HZ);
+       			add_timer(&tp->timer);
+                }
+
+                return;
+        }
+
+
+	if (tulip_debug > 1)
+		dev_info(&dev->dev, "PNIC2 Link Change Default?\n");
+
+        /* if all else fails default to trying 10baseT-HD */
+	dev->if_port = 0;
+
+        /* make sure autonegotiate enable is off */
+	csr14 = (ioread32(ioaddr + CSR14) & 0xffffff7f);
+        iowrite32(csr14,ioaddr + CSR14);
+
+        /* set to 10baseTx-HD - see Data Port Selection
+         * comment given at the top of the file
+         */
+	tp->csr6 = (ioread32(ioaddr + CSR6) & 0xfe3bd1fd);
+        tp->csr6 |= 0x00400000;
+
+	tulip_restart_rxtx(tp);
+}
+
diff --git a/drivers/net/ethernet/dec/tulip/timer.c b/drivers/net/ethernet/dec/tulip/timer.c
new file mode 100644
index 000000000000..19078d28ffb9
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/timer.c
@@ -0,0 +1,176 @@
+/*
+	drivers/net/tulip/timer.c
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+
+#include "tulip.h"
+
+
+void tulip_media_task(struct work_struct *work)
+{
+	struct tulip_private *tp =
+		container_of(work, struct tulip_private, media_work);
+	struct net_device *dev = tp->dev;
+	void __iomem *ioaddr = tp->base_addr;
+	u32 csr12 = ioread32(ioaddr + CSR12);
+	int next_tick = 2*HZ;
+	unsigned long flags;
+
+	if (tulip_debug > 2) {
+		netdev_dbg(dev, "Media selection tick, %s, status %08x mode %08x SIA %08x %08x %08x %08x\n",
+			   medianame[dev->if_port],
+			   ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR6),
+			   csr12, ioread32(ioaddr + CSR13),
+			   ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
+	}
+	switch (tp->chip_id) {
+	case DC21140:
+	case DC21142:
+	case MX98713:
+	case COMPEX9881:
+	case DM910X:
+	default: {
+		struct medialeaf *mleaf;
+		unsigned char *p;
+		if (tp->mtable == NULL) {	/* No EEPROM info, use generic code. */
+			/* Not much that can be done.
+			   Assume this a generic MII or SYM transceiver. */
+			next_tick = 60*HZ;
+			if (tulip_debug > 2)
+				netdev_dbg(dev, "network media monitor CSR6 %08x CSR12 0x%02x\n",
+					   ioread32(ioaddr + CSR6),
+					   csr12 & 0xff);
+			break;
+		}
+		mleaf = &tp->mtable->mleaf[tp->cur_index];
+		p = mleaf->leafdata;
+		switch (mleaf->type) {
+		case 0: case 4: {
+			/* Type 0 serial or 4 SYM transceiver.  Check the link beat bit. */
+			int offset = mleaf->type == 4 ? 5 : 2;
+			s8 bitnum = p[offset];
+			if (p[offset+1] & 0x80) {
+				if (tulip_debug > 1)
+					netdev_dbg(dev, "Transceiver monitor tick CSR12=%#02x, no media sense\n",
+						   csr12);
+				if (mleaf->type == 4) {
+					if (mleaf->media == 3 && (csr12 & 0x02))
+						goto select_next_media;
+				}
+				break;
+			}
+			if (tulip_debug > 2)
+				netdev_dbg(dev, "Transceiver monitor tick: CSR12=%#02x bit %d is %d, expecting %d\n",
+					   csr12, (bitnum >> 1) & 7,
+					   (csr12 & (1 << ((bitnum >> 1) & 7))) != 0,
+					   (bitnum >= 0));
+			/* Check that the specified bit has the proper value. */
+			if ((bitnum < 0) !=
+				((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) {
+				if (tulip_debug > 2)
+					netdev_dbg(dev, "Link beat detected for %s\n",
+						   medianame[mleaf->media & MEDIA_MASK]);
+				if ((p[2] & 0x61) == 0x01)	/* Bogus Znyx board. */
+					goto actually_mii;
+				netif_carrier_on(dev);
+				break;
+			}
+			netif_carrier_off(dev);
+			if (tp->medialock)
+				break;
+	  select_next_media:
+			if (--tp->cur_index < 0) {
+				/* We start again, but should instead look for default. */
+				tp->cur_index = tp->mtable->leafcount - 1;
+			}
+			dev->if_port = tp->mtable->mleaf[tp->cur_index].media;
+			if (tulip_media_cap[dev->if_port] & MediaIsFD)
+				goto select_next_media; /* Skip FD entries. */
+			if (tulip_debug > 1)
+				netdev_dbg(dev, "No link beat on media %s, trying transceiver type %s\n",
+					   medianame[mleaf->media & MEDIA_MASK],
+					   medianame[tp->mtable->mleaf[tp->cur_index].media]);
+			tulip_select_media(dev, 0);
+			/* Restart the transmit process. */
+			tulip_restart_rxtx(tp);
+			next_tick = (24*HZ)/10;
+			break;
+		}
+		case 1:  case 3:		/* 21140, 21142 MII */
+		actually_mii:
+			if (tulip_check_duplex(dev) < 0) {
+				netif_carrier_off(dev);
+				next_tick = 3*HZ;
+			} else {
+				netif_carrier_on(dev);
+				next_tick = 60*HZ;
+			}
+			break;
+		case 2:					/* 21142 serial block has no link beat. */
+		default:
+			break;
+		}
+	}
+	break;
+	}
+
+
+	spin_lock_irqsave(&tp->lock, flags);
+	if (tp->timeout_recovery) {
+		tulip_tx_timeout_complete(tp, ioaddr);
+		tp->timeout_recovery = 0;
+	}
+	spin_unlock_irqrestore(&tp->lock, flags);
+
+	/* mod_timer synchronizes us with potential add_timer calls
+	 * from interrupts.
+	 */
+	mod_timer(&tp->timer, RUN_AT(next_tick));
+}
+
+
+void mxic_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int next_tick = 60*HZ;
+
+	if (tulip_debug > 3) {
+		dev_info(&dev->dev, "MXIC negotiation status %08x\n",
+			 ioread32(ioaddr + CSR12));
+	}
+	if (next_tick) {
+		mod_timer(&tp->timer, RUN_AT(next_tick));
+	}
+}
+
+
+void comet_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+	int next_tick = 60*HZ;
+
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "Comet link status %04x partner capability %04x\n",
+			   tulip_mdio_read(dev, tp->phys[0], 1),
+			   tulip_mdio_read(dev, tp->phys[0], 5));
+	/* mod_timer synchronizes us with potential add_timer calls
+	 * from interrupts.
+	 */
+	if (tulip_check_duplex(dev) < 0)
+		{ netif_carrier_off(dev); }
+	else
+		{ netif_carrier_on(dev); }
+	mod_timer(&tp->timer, RUN_AT(next_tick));
+}
+
diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
new file mode 100644
index 000000000000..fb3887c18dc6
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
@@ -0,0 +1,570 @@
+/*
+	drivers/net/tulip/tulip.h
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+#ifndef __NET_TULIP_H__
+#define __NET_TULIP_H__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+
+
+
+/* undefine, or define to various debugging levels (>4 == obscene levels) */
+#define TULIP_DEBUG 1
+
+#ifdef CONFIG_TULIP_MMIO
+#define TULIP_BAR	1	/* CBMA */
+#else
+#define TULIP_BAR	0	/* CBIO */
+#endif
+
+
+
+struct tulip_chip_table {
+	char *chip_name;
+	int io_size;
+	int valid_intrs;	/* CSR7 interrupt enable settings */
+	int flags;
+	void (*media_timer) (unsigned long);
+	work_func_t media_task;
+};
+
+
+enum tbl_flag {
+	HAS_MII			= 0x00001,
+	HAS_MEDIA_TABLE		= 0x00002,
+	CSR12_IN_SROM		= 0x00004,
+	ALWAYS_CHECK_MII	= 0x00008,
+	HAS_ACPI		= 0x00010,
+	MC_HASH_ONLY		= 0x00020, /* Hash-only multicast filter. */
+	HAS_PNICNWAY		= 0x00080,
+	HAS_NWAY		= 0x00040, /* Uses internal NWay xcvr. */
+	HAS_INTR_MITIGATION	= 0x00100,
+	IS_ASIX			= 0x00200,
+	HAS_8023X		= 0x00400,
+	COMET_MAC_ADDR		= 0x00800,
+	HAS_PCI_MWI		= 0x01000,
+	HAS_PHY_IRQ		= 0x02000,
+	HAS_SWAPPED_SEEPROM	= 0x04000,
+	NEEDS_FAKE_MEDIA_TABLE	= 0x08000,
+	COMET_PM		= 0x10000,
+};
+
+
+/* chip types.  careful!  order is VERY IMPORTANT here, as these
+ * are used throughout the driver as indices into arrays */
+/* Note 21142 == 21143. */
+enum chips {
+	DC21040 = 0,
+	DC21041 = 1,
+	DC21140 = 2,
+	DC21142 = 3, DC21143 = 3,
+	LC82C168,
+	MX98713,
+	MX98715,
+	MX98725,
+	AX88140,
+	PNIC2,
+	COMET,
+	COMPEX9881,
+	I21145,
+	DM910X,
+	CONEXANT,
+};
+
+
+enum MediaIs {
+	MediaIsFD = 1,
+	MediaAlwaysFD = 2,
+	MediaIsMII = 4,
+	MediaIsFx = 8,
+	MediaIs100 = 16
+};
+
+
+/* Offsets to the Command and Status Registers, "CSRs".  All accesses
+   must be longword instructions and quadword aligned. */
+enum tulip_offsets {
+	CSR0 = 0,
+	CSR1 = 0x08,
+	CSR2 = 0x10,
+	CSR3 = 0x18,
+	CSR4 = 0x20,
+	CSR5 = 0x28,
+	CSR6 = 0x30,
+	CSR7 = 0x38,
+	CSR8 = 0x40,
+	CSR9 = 0x48,
+	CSR10 = 0x50,
+	CSR11 = 0x58,
+	CSR12 = 0x60,
+	CSR13 = 0x68,
+	CSR14 = 0x70,
+	CSR15 = 0x78,
+	CSR18 = 0x88,
+	CSR19 = 0x8c,
+	CSR20 = 0x90,
+	CSR27 = 0xAC,
+	CSR28 = 0xB0,
+};
+
+/* register offset and bits for CFDD PCI config reg */
+enum pci_cfg_driver_reg {
+	CFDD = 0x40,
+	CFDD_Sleep = (1 << 31),
+	CFDD_Snooze = (1 << 30),
+};
+
+#define RxPollInt (RxIntr|RxNoBuf|RxDied|RxJabber)
+
+/* The bits in the CSR5 status registers, mostly interrupt sources. */
+enum status_bits {
+	TimerInt = 0x800,
+	SystemError = 0x2000,
+	TPLnkFail = 0x1000,
+	TPLnkPass = 0x10,
+	NormalIntr = 0x10000,
+	AbnormalIntr = 0x8000,
+	RxJabber = 0x200,
+	RxDied = 0x100,
+	RxNoBuf = 0x80,
+	RxIntr = 0x40,
+	TxFIFOUnderflow = 0x20,
+	RxErrIntr = 0x10,
+	TxJabber = 0x08,
+	TxNoBuf = 0x04,
+	TxDied = 0x02,
+	TxIntr = 0x01,
+};
+
+/* bit mask for CSR5 TX/RX process state */
+#define CSR5_TS	0x00700000
+#define CSR5_RS	0x000e0000
+
+enum tulip_mode_bits {
+	TxThreshold		= (1 << 22),
+	FullDuplex		= (1 << 9),
+	TxOn			= 0x2000,
+	AcceptBroadcast		= 0x0100,
+	AcceptAllMulticast	= 0x0080,
+	AcceptAllPhys		= 0x0040,
+	AcceptRunt		= 0x0008,
+	RxOn			= 0x0002,
+	RxTx			= (TxOn | RxOn),
+};
+
+
+enum tulip_busconfig_bits {
+	MWI			= (1 << 24),
+	MRL			= (1 << 23),
+	MRM			= (1 << 21),
+	CALShift		= 14,
+	BurstLenShift		= 8,
+};
+
+
+/* The Tulip Rx and Tx buffer descriptors. */
+struct tulip_rx_desc {
+	__le32 status;
+	__le32 length;
+	__le32 buffer1;
+	__le32 buffer2;
+};
+
+
+struct tulip_tx_desc {
+	__le32 status;
+	__le32 length;
+	__le32 buffer1;
+	__le32 buffer2;		/* We use only buffer 1.  */
+};
+
+
+enum desc_status_bits {
+	DescOwned    = 0x80000000,
+	DescWholePkt = 0x60000000,
+	DescEndPkt   = 0x40000000,
+	DescStartPkt = 0x20000000,
+	DescEndRing  = 0x02000000,
+	DescUseLink  = 0x01000000,
+
+	/*
+	 * Error summary flag is logical or of 'CRC Error', 'Collision Seen',
+	 * 'Frame Too Long', 'Runt' and 'Descriptor Error' flags generated
+	 * within tulip chip.
+	 */
+	RxDescErrorSummary = 0x8000,
+	RxDescCRCError = 0x0002,
+	RxDescCollisionSeen = 0x0040,
+
+	/*
+	 * 'Frame Too Long' flag is set if packet length including CRC exceeds
+	 * 1518.  However, a full sized VLAN tagged frame is 1522 bytes
+	 * including CRC.
+	 *
+	 * The tulip chip does not block oversized frames, and if this flag is
+	 * set on a receive descriptor it does not indicate the frame has been
+	 * truncated.  The receive descriptor also includes the actual length.
+	 * Therefore we can safety ignore this flag and check the length
+	 * ourselves.
+	 */
+	RxDescFrameTooLong = 0x0080,
+	RxDescRunt = 0x0800,
+	RxDescDescErr = 0x4000,
+	RxWholePkt   = 0x00000300,
+	/*
+	 * Top three bits of 14 bit frame length (status bits 27-29) should
+	 * never be set as that would make frame over 2047 bytes. The Receive
+	 * Watchdog flag (bit 4) may indicate the length is over 2048 and the
+	 * length field is invalid.
+	 */
+	RxLengthOver2047 = 0x38000010
+};
+
+
+enum t21143_csr6_bits {
+	csr6_sc = (1<<31),
+	csr6_ra = (1<<30),
+	csr6_ign_dest_msb = (1<<26),
+	csr6_mbo = (1<<25),
+	csr6_scr = (1<<24),  /* scramble mode flag: can't be set */
+	csr6_pcs = (1<<23),  /* Enables PCS functions (symbol mode requires csr6_ps be set) default is set */
+	csr6_ttm = (1<<22),  /* Transmit Threshold Mode, set for 10baseT, 0 for 100BaseTX */
+	csr6_sf = (1<<21),   /* Store and forward. If set ignores TR bits */
+	csr6_hbd = (1<<19),  /* Heart beat disable. Disables SQE function in 10baseT */
+	csr6_ps = (1<<18),   /* Port Select. 0 (defualt) = 10baseT, 1 = 100baseTX: can't be set */
+	csr6_ca = (1<<17),   /* Collision Offset Enable. If set uses special algorithm in low collision situations */
+	csr6_trh = (1<<15),  /* Transmit Threshold high bit */
+	csr6_trl = (1<<14),  /* Transmit Threshold low bit */
+
+	/***************************************************************
+	 * This table shows transmit threshold values based on media   *
+	 * and these two registers (from PNIC1 & 2 docs) Note: this is *
+	 * all meaningless if sf is set.                               *
+	 ***************************************************************/
+
+	/***********************************
+	 * (trh,trl) * 100BaseTX * 10BaseT *
+	 ***********************************
+	 *   (0,0)   *     128   *    72   *
+	 *   (0,1)   *     256   *    96   *
+	 *   (1,0)   *     512   *   128   *
+	 *   (1,1)   *    1024   *   160   *
+	 ***********************************/
+
+	csr6_fc = (1<<12),   /* Forces a collision in next transmission (for testing in loopback mode) */
+	csr6_om_int_loop = (1<<10), /* internal (FIFO) loopback flag */
+	csr6_om_ext_loop = (1<<11), /* external (PMD) loopback flag */
+	/* set both and you get (PHY) loopback */
+	csr6_fd = (1<<9),    /* Full duplex mode, disables hearbeat, no loopback */
+	csr6_pm = (1<<7),    /* Pass All Multicast */
+	csr6_pr = (1<<6),    /* Promiscuous mode */
+	csr6_sb = (1<<5),    /* Start(1)/Stop(0) backoff counter */
+	csr6_if = (1<<4),    /* Inverse Filtering, rejects only addresses in address table: can't be set */
+	csr6_pb = (1<<3),    /* Pass Bad Frames, (1) causes even bad frames to be passed on */
+	csr6_ho = (1<<2),    /* Hash-only filtering mode: can't be set */
+	csr6_hp = (1<<0),    /* Hash/Perfect Receive Filtering Mode: can't be set */
+
+	csr6_mask_capture = (csr6_sc | csr6_ca),
+	csr6_mask_defstate = (csr6_mask_capture | csr6_mbo),
+	csr6_mask_hdcap = (csr6_mask_defstate | csr6_hbd | csr6_ps),
+	csr6_mask_hdcaptt = (csr6_mask_hdcap  | csr6_trh | csr6_trl),
+	csr6_mask_fullcap = (csr6_mask_hdcaptt | csr6_fd),
+	csr6_mask_fullpromisc = (csr6_pr | csr6_pm),
+	csr6_mask_filters = (csr6_hp | csr6_ho | csr6_if),
+	csr6_mask_100bt = (csr6_scr | csr6_pcs | csr6_hbd),
+};
+
+enum tulip_comet_csr13_bits {
+/* The LINKOFFE and LINKONE work in conjunction with LSCE, i.e. they
+ * determine which link status transition wakes up if LSCE is
+ * enabled */
+        comet_csr13_linkoffe = (1 << 17),
+        comet_csr13_linkone = (1 << 16),
+        comet_csr13_wfre = (1 << 10),
+        comet_csr13_mpre = (1 << 9),
+        comet_csr13_lsce = (1 << 8),
+        comet_csr13_wfr = (1 << 2),
+        comet_csr13_mpr = (1 << 1),
+        comet_csr13_lsc = (1 << 0),
+};
+
+enum tulip_comet_csr18_bits {
+        comet_csr18_pmes_sticky = (1 << 24),
+        comet_csr18_pm_mode = (1 << 19),
+        comet_csr18_apm_mode = (1 << 18),
+        comet_csr18_d3a = (1 << 7)
+};
+
+enum tulip_comet_csr20_bits {
+        comet_csr20_pmes = (1 << 15),
+};
+
+/* Keep the ring sizes a power of two for efficiency.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+
+#define TX_RING_SIZE	32
+#define RX_RING_SIZE	128
+#define MEDIA_MASK     31
+
+/* The receiver on the DC21143 rev 65 can fail to close the last
+ * receive descriptor in certain circumstances (see errata) when
+ * using MWI. This can only occur if the receive buffer ends on
+ * a cache line boundary, so the "+ 4" below ensures it doesn't.
+ */
+#define PKT_BUF_SZ	(1536 + 4)	/* Size of each temporary Rx buffer. */
+
+#define TULIP_MIN_CACHE_LINE	8	/* in units of 32-bit words */
+
+#if defined(__sparc__) || defined(__hppa__)
+/* The UltraSparc PCI controllers will disconnect at every 64-byte
+ * crossing anyways so it makes no sense to tell Tulip to burst
+ * any more than that.
+ */
+#define TULIP_MAX_CACHE_LINE	16	/* in units of 32-bit words */
+#else
+#define TULIP_MAX_CACHE_LINE	32	/* in units of 32-bit words */
+#endif
+
+
+/* Ring-wrap flag in length field, use for last ring entry.
+	0x01000000 means chain on buffer2 address,
+	0x02000000 means use the ring start address in CSR2/3.
+   Note: Some work-alike chips do not function correctly in chained mode.
+   The ASIX chip works only in chained mode.
+   Thus we indicates ring mode, but always write the 'next' field for
+   chained mode as well.
+*/
+#define DESC_RING_WRAP 0x02000000
+
+
+#define EEPROM_SIZE 512 	/* 2 << EEPROM_ADDRLEN */
+
+
+#define RUN_AT(x) (jiffies + (x))
+
+#define get_u16(ptr) get_unaligned_le16((ptr))
+
+struct medialeaf {
+	u8 type;
+	u8 media;
+	unsigned char *leafdata;
+};
+
+
+struct mediatable {
+	u16 defaultmedia;
+	u8 leafcount;
+	u8 csr12dir;		/* General purpose pin directions. */
+	unsigned has_mii:1;
+	unsigned has_nonmii:1;
+	unsigned has_reset:6;
+	u32 csr15dir;
+	u32 csr15val;		/* 21143 NWay setting. */
+	struct medialeaf mleaf[0];
+};
+
+
+struct mediainfo {
+	struct mediainfo *next;
+	int info_type;
+	int index;
+	unsigned char *info;
+};
+
+struct ring_info {
+	struct sk_buff	*skb;
+	dma_addr_t	mapping;
+};
+
+
+struct tulip_private {
+	const char *product_name;
+	struct net_device *next_module;
+	struct tulip_rx_desc *rx_ring;
+	struct tulip_tx_desc *tx_ring;
+	dma_addr_t rx_ring_dma;
+	dma_addr_t tx_ring_dma;
+	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
+	struct ring_info tx_buffers[TX_RING_SIZE];
+	/* The addresses of receive-in-place skbuffs. */
+	struct ring_info rx_buffers[RX_RING_SIZE];
+	u16 setup_frame[96];	/* Pseudo-Tx frame to init address table. */
+	int chip_id;
+	int revision;
+	int flags;
+	struct napi_struct napi;
+	struct timer_list timer;	/* Media selection timer. */
+	struct timer_list oom_timer;    /* Out of memory timer. */
+	u32 mc_filter[2];
+	spinlock_t lock;
+	spinlock_t mii_lock;
+	unsigned int cur_rx, cur_tx;	/* The next free ring entry */
+	unsigned int dirty_rx, dirty_tx;	/* The ring entries to be free()ed. */
+
+#ifdef 	CONFIG_TULIP_NAPI_HW_MITIGATION
+        int mit_on;
+#endif
+	unsigned int full_duplex:1;	/* Full-duplex operation requested. */
+	unsigned int full_duplex_lock:1;
+	unsigned int fake_addr:1;	/* Multiport board faked address. */
+	unsigned int default_port:4;	/* Last dev->if_port value. */
+	unsigned int media2:4;	/* Secondary monitored media port. */
+	unsigned int medialock:1;	/* Don't sense media type. */
+	unsigned int mediasense:1;	/* Media sensing in progress. */
+	unsigned int nway:1, nwayset:1;		/* 21143 internal NWay. */
+	unsigned int timeout_recovery:1;
+	unsigned int csr0;	/* CSR0 setting. */
+	unsigned int csr6;	/* Current CSR6 control settings. */
+	unsigned char eeprom[EEPROM_SIZE];	/* Serial EEPROM contents. */
+	void (*link_change) (struct net_device * dev, int csr5);
+        struct ethtool_wolinfo wolinfo;        /* WOL settings */
+	u16 sym_advertise, mii_advertise; /* NWay capabilities advertised.  */
+	u16 lpar;		/* 21143 Link partner ability. */
+	u16 advertising[4];
+	signed char phys[4], mii_cnt;	/* MII device addresses. */
+	struct mediatable *mtable;
+	int cur_index;		/* Current media index. */
+	int saved_if_port;
+	struct pci_dev *pdev;
+	int ttimer;
+	int susp_rx;
+	unsigned long nir;
+	void __iomem *base_addr;
+	int csr12_shadow;
+	int pad0;		/* Used for 8-byte alignment */
+	struct work_struct media_work;
+	struct net_device *dev;
+};
+
+
+struct eeprom_fixup {
+	char *name;
+	unsigned char addr0;
+	unsigned char addr1;
+	unsigned char addr2;
+	u16 newtable[32];	/* Max length below. */
+};
+
+
+/* 21142.c */
+extern u16 t21142_csr14[];
+void t21142_media_task(struct work_struct *work);
+void t21142_start_nway(struct net_device *dev);
+void t21142_lnk_change(struct net_device *dev, int csr5);
+
+
+/* PNIC2.c */
+void pnic2_lnk_change(struct net_device *dev, int csr5);
+void pnic2_timer(unsigned long data);
+void pnic2_start_nway(struct net_device *dev);
+void pnic2_lnk_change(struct net_device *dev, int csr5);
+
+/* eeprom.c */
+void tulip_parse_eeprom(struct net_device *dev);
+int tulip_read_eeprom(struct net_device *dev, int location, int addr_len);
+
+/* interrupt.c */
+extern unsigned int tulip_max_interrupt_work;
+extern int tulip_rx_copybreak;
+irqreturn_t tulip_interrupt(int irq, void *dev_instance);
+int tulip_refill_rx(struct net_device *dev);
+#ifdef CONFIG_TULIP_NAPI
+int tulip_poll(struct napi_struct *napi, int budget);
+#endif
+
+
+/* media.c */
+int tulip_mdio_read(struct net_device *dev, int phy_id, int location);
+void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int value);
+void tulip_select_media(struct net_device *dev, int startup);
+int tulip_check_duplex(struct net_device *dev);
+void tulip_find_mii (struct net_device *dev, int board_idx);
+
+/* pnic.c */
+void pnic_do_nway(struct net_device *dev);
+void pnic_lnk_change(struct net_device *dev, int csr5);
+void pnic_timer(unsigned long data);
+
+/* timer.c */
+void tulip_media_task(struct work_struct *work);
+void mxic_timer(unsigned long data);
+void comet_timer(unsigned long data);
+
+/* tulip_core.c */
+extern int tulip_debug;
+extern const char * const medianame[];
+extern const char tulip_media_cap[];
+extern struct tulip_chip_table tulip_tbl[];
+void oom_timer(unsigned long data);
+extern u8 t21040_csr13[];
+
+static inline void tulip_start_rxtx(struct tulip_private *tp)
+{
+	void __iomem *ioaddr = tp->base_addr;
+	iowrite32(tp->csr6 | RxTx, ioaddr + CSR6);
+	barrier();
+	(void) ioread32(ioaddr + CSR6); /* mmio sync */
+}
+
+static inline void tulip_stop_rxtx(struct tulip_private *tp)
+{
+	void __iomem *ioaddr = tp->base_addr;
+	u32 csr6 = ioread32(ioaddr + CSR6);
+
+	if (csr6 & RxTx) {
+		unsigned i=1300/10;
+		iowrite32(csr6 & ~RxTx, ioaddr + CSR6);
+		barrier();
+		/* wait until in-flight frame completes.
+		 * Max time @ 10BT: 1500*8b/10Mbps == 1200us (+ 100us margin)
+		 * Typically expect this loop to end in < 50 us on 100BT.
+		 */
+		while (--i && (ioread32(ioaddr + CSR5) & (CSR5_TS|CSR5_RS)))
+			udelay(10);
+
+		if (!i)
+			netdev_dbg(tp->dev, "tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n",
+				   ioread32(ioaddr + CSR5),
+				   ioread32(ioaddr + CSR6));
+	}
+}
+
+static inline void tulip_restart_rxtx(struct tulip_private *tp)
+{
+	tulip_stop_rxtx(tp);
+	udelay(5);
+	tulip_start_rxtx(tp);
+}
+
+static inline void tulip_tx_timeout_complete(struct tulip_private *tp, void __iomem *ioaddr)
+{
+	/* Stop and restart the chip's Tx processes. */
+	tulip_restart_rxtx(tp);
+	/* Trigger an immediate transmit demand. */
+	iowrite32(0, ioaddr + CSR1);
+
+	tp->dev->stats.tx_errors++;
+}
+
+#endif /* __NET_TULIP_H__ */
diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
new file mode 100644
index 000000000000..9656dd0647d9
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -0,0 +1,2008 @@
+/*	tulip_core.c: A DEC 21x4x-family ethernet driver for Linux.
+
+	Copyright 2000,2001  The Linux Kernel Team
+	Written/copyright 1994-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	Please submit bugs to http://bugzilla.kernel.org/ .
+*/
+
+#define pr_fmt(fmt) "tulip: " fmt
+
+#define DRV_NAME	"tulip"
+#ifdef CONFIG_TULIP_NAPI
+#define DRV_VERSION    "1.1.15-NAPI" /* Keep at least for test */
+#else
+#define DRV_VERSION	"1.1.15"
+#endif
+#define DRV_RELDATE	"Feb 27, 2007"
+
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include "tulip.h"
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <asm/unaligned.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
+#endif
+
+static char version[] __devinitdata =
+	"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
+
+/* A few user-configurable values. */
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static unsigned int max_interrupt_work = 25;
+
+#define MAX_UNITS 8
+/* Used to pass the full-duplex flag, etc. */
+static int full_duplex[MAX_UNITS];
+static int options[MAX_UNITS];
+static int mtu[MAX_UNITS];			/* Jumbo MTU for interfaces. */
+
+/*  The possible media types that can be set in options[] are: */
+const char * const medianame[32] = {
+	"10baseT", "10base2", "AUI", "100baseTx",
+	"10baseT-FDX", "100baseTx-FDX", "100baseT4", "100baseFx",
+	"100baseFx-FDX", "MII 10baseT", "MII 10baseT-FDX", "MII",
+	"10baseT(forced)", "MII 100baseTx", "MII 100baseTx-FDX", "MII 100baseT4",
+	"MII 100baseFx-HDX", "MII 100baseFx-FDX", "Home-PNA 1Mbps", "Invalid-19",
+	"","","","", "","","","",  "","","","Transceiver reset",
+};
+
+/* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+	defined(CONFIG_SPARC) || defined(__ia64__) || \
+	defined(__sh__) || defined(__mips__)
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak = 100;
+#endif
+
+/*
+  Set the bus performance register.
+	Typical: Set 16 longword cache alignment, no burst limit.
+	Cache alignment bits 15:14	     Burst length 13:8
+		0000	No alignment  0x00000000 unlimited		0800 8 longwords
+		4000	8  longwords		0100 1 longword		1000 16 longwords
+		8000	16 longwords		0200 2 longwords	2000 32 longwords
+		C000	32  longwords		0400 4 longwords
+	Warning: many older 486 systems are broken and require setting 0x00A04800
+	   8 longword cache alignment, 8 longword burst.
+	ToDo: Non-Intel setting could be better.
+*/
+
+#if defined(__alpha__) || defined(__ia64__)
+static int csr0 = 0x01A00000 | 0xE000;
+#elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__)
+static int csr0 = 0x01A00000 | 0x8000;
+#elif defined(CONFIG_SPARC) || defined(__hppa__)
+/* The UltraSparc PCI controllers will disconnect at every 64-byte
+ * crossing anyways so it makes no sense to tell Tulip to burst
+ * any more than that.
+ */
+static int csr0 = 0x01A00000 | 0x9000;
+#elif defined(__arm__) || defined(__sh__)
+static int csr0 = 0x01A00000 | 0x4800;
+#elif defined(__mips__)
+static int csr0 = 0x00200000 | 0x4000;
+#else
+#warning Processor architecture undefined!
+static int csr0 = 0x00A00000 | 0x4800;
+#endif
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (4*HZ)
+
+
+MODULE_AUTHOR("The Linux Kernel Team");
+MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+module_param(tulip_debug, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(csr0, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+
+#ifdef TULIP_DEBUG
+int tulip_debug = TULIP_DEBUG;
+#else
+int tulip_debug = 1;
+#endif
+
+static void tulip_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct tulip_private *tp = netdev_priv(dev);
+
+	if (netif_running(dev))
+		schedule_work(&tp->media_work);
+}
+
+/*
+ * This table use during operation for capabilities and media timer.
+ *
+ * It is indexed via the values in 'enum chips'
+ */
+
+struct tulip_chip_table tulip_tbl[] = {
+  { }, /* placeholder for array, slot unused currently */
+  { }, /* placeholder for array, slot unused currently */
+
+  /* DC21140 */
+  { "Digital DS21140 Tulip", 128, 0x0001ebef,
+	HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer,
+	tulip_media_task },
+
+  /* DC21142, DC21143 */
+  { "Digital DS21142/43 Tulip", 128, 0x0801fbff,
+	HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY
+	| HAS_INTR_MITIGATION | HAS_PCI_MWI, tulip_timer, t21142_media_task },
+
+  /* LC82C168 */
+  { "Lite-On 82c168 PNIC", 256, 0x0001fbef,
+	HAS_MII | HAS_PNICNWAY, pnic_timer, },
+
+  /* MX98713 */
+  { "Macronix 98713 PMAC", 128, 0x0001ebef,
+	HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, },
+
+  /* MX98715 */
+  { "Macronix 98715 PMAC", 256, 0x0001ebef,
+	HAS_MEDIA_TABLE, mxic_timer, },
+
+  /* MX98725 */
+  { "Macronix 98725 PMAC", 256, 0x0001ebef,
+	HAS_MEDIA_TABLE, mxic_timer, },
+
+  /* AX88140 */
+  { "ASIX AX88140", 128, 0x0001fbff,
+	HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY
+	| IS_ASIX, tulip_timer, tulip_media_task },
+
+  /* PNIC2 */
+  { "Lite-On PNIC-II", 256, 0x0801fbff,
+	HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer, },
+
+  /* COMET */
+  { "ADMtek Comet", 256, 0x0001abef,
+	HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer, },
+
+  /* COMPEX9881 */
+  { "Compex 9881 PMAC", 128, 0x0001ebef,
+	HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, },
+
+  /* I21145 */
+  { "Intel DS21145 Tulip", 128, 0x0801fbff,
+	HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI
+	| HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task },
+
+  /* DM910X */
+#ifdef CONFIG_TULIP_DM910X
+  { "Davicom DM9102/DM9102A", 128, 0x0001ebef,
+	HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
+	tulip_timer, tulip_media_task },
+#else
+  { NULL },
+#endif
+
+  /* RS7112 */
+  { "Conexant LANfinity", 256, 0x0001ebef,
+	HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task },
+
+};
+
+
+static DEFINE_PCI_DEVICE_TABLE(tulip_pci_tbl) = {
+	{ 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
+	{ 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
+	{ 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 },
+	{ 0x10d9, 0x0512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98713 },
+	{ 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
+/*	{ 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98725 },*/
+	{ 0x125B, 0x1400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AX88140 },
+	{ 0x11AD, 0xc115, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PNIC2 },
+	{ 0x1317, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1317, 0x0985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1317, 0x1985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1317, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x13D1, 0xAB02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x13D1, 0xAB03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x13D1, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x104A, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 },
+	{ 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 },
+#ifdef CONFIG_TULIP_DM910X
+	{ 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+	{ 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+#endif
+	{ 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
+	{ 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1186, 0x1541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1186, 0x1561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1186, 0x1591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x14f1, 0x1803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CONEXANT },
+	{ 0x1626, 0x8410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
+	{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
+	{ 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */
+	{ 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
+	{ } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, tulip_pci_tbl);
+
+
+/* A full-duplex map for media types. */
+const char tulip_media_cap[32] =
+{0,0,0,16,  3,19,16,24,  27,4,7,5, 0,20,23,20,  28,31,0,0, };
+
+static void tulip_tx_timeout(struct net_device *dev);
+static void tulip_init_ring(struct net_device *dev);
+static void tulip_free_ring(struct net_device *dev);
+static netdev_tx_t tulip_start_xmit(struct sk_buff *skb,
+					  struct net_device *dev);
+static int tulip_open(struct net_device *dev);
+static int tulip_close(struct net_device *dev);
+static void tulip_up(struct net_device *dev);
+static void tulip_down(struct net_device *dev);
+static struct net_device_stats *tulip_get_stats(struct net_device *dev);
+static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void tulip_set_wolopts(struct pci_dev *pdev, u32 wolopts);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_tulip(struct net_device *dev);
+#endif
+
+static void tulip_set_power_state (struct tulip_private *tp,
+				   int sleep, int snooze)
+{
+	if (tp->flags & HAS_ACPI) {
+		u32 tmp, newtmp;
+		pci_read_config_dword (tp->pdev, CFDD, &tmp);
+		newtmp = tmp & ~(CFDD_Sleep | CFDD_Snooze);
+		if (sleep)
+			newtmp |= CFDD_Sleep;
+		else if (snooze)
+			newtmp |= CFDD_Snooze;
+		if (tmp != newtmp)
+			pci_write_config_dword (tp->pdev, CFDD, newtmp);
+	}
+
+}
+
+
+static void tulip_up(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int next_tick = 3*HZ;
+	u32 reg;
+	int i;
+
+#ifdef CONFIG_TULIP_NAPI
+	napi_enable(&tp->napi);
+#endif
+
+	/* Wake the chip from sleep/snooze mode. */
+	tulip_set_power_state (tp, 0, 0);
+
+	/* Disable all WOL events */
+	pci_enable_wake(tp->pdev, PCI_D3hot, 0);
+	pci_enable_wake(tp->pdev, PCI_D3cold, 0);
+	tulip_set_wolopts(tp->pdev, 0);
+
+	/* On some chip revs we must set the MII/SYM port before the reset!? */
+	if (tp->mii_cnt  ||  (tp->mtable  &&  tp->mtable->has_mii))
+		iowrite32(0x00040000, ioaddr + CSR6);
+
+	/* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
+	iowrite32(0x00000001, ioaddr + CSR0);
+	pci_read_config_dword(tp->pdev, PCI_COMMAND, &reg);  /* flush write */
+	udelay(100);
+
+	/* Deassert reset.
+	   Wait the specified 50 PCI cycles after a reset by initializing
+	   Tx and Rx queues and the address filter list. */
+	iowrite32(tp->csr0, ioaddr + CSR0);
+	pci_read_config_dword(tp->pdev, PCI_COMMAND, &reg);  /* flush write */
+	udelay(100);
+
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "tulip_up(), irq==%d\n", dev->irq);
+
+	iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
+	iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
+	tp->cur_rx = tp->cur_tx = 0;
+	tp->dirty_rx = tp->dirty_tx = 0;
+
+	if (tp->flags & MC_HASH_ONLY) {
+		u32 addr_low = get_unaligned_le32(dev->dev_addr);
+		u32 addr_high = get_unaligned_le16(dev->dev_addr + 4);
+		if (tp->chip_id == AX88140) {
+			iowrite32(0, ioaddr + CSR13);
+			iowrite32(addr_low,  ioaddr + CSR14);
+			iowrite32(1, ioaddr + CSR13);
+			iowrite32(addr_high, ioaddr + CSR14);
+		} else if (tp->flags & COMET_MAC_ADDR) {
+			iowrite32(addr_low,  ioaddr + 0xA4);
+			iowrite32(addr_high, ioaddr + 0xA8);
+			iowrite32(0, ioaddr + CSR27);
+			iowrite32(0, ioaddr + CSR28);
+		}
+	} else {
+		/* This is set_rx_mode(), but without starting the transmitter. */
+		u16 *eaddrs = (u16 *)dev->dev_addr;
+		u16 *setup_frm = &tp->setup_frame[15*6];
+		dma_addr_t mapping;
+
+		/* 21140 bug: you must add the broadcast address. */
+		memset(tp->setup_frame, 0xff, sizeof(tp->setup_frame));
+		/* Fill the final entry of the table with our physical address. */
+		*setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+		*setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+		*setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+
+		mapping = pci_map_single(tp->pdev, tp->setup_frame,
+					 sizeof(tp->setup_frame),
+					 PCI_DMA_TODEVICE);
+		tp->tx_buffers[tp->cur_tx].skb = NULL;
+		tp->tx_buffers[tp->cur_tx].mapping = mapping;
+
+		/* Put the setup frame on the Tx list. */
+		tp->tx_ring[tp->cur_tx].length = cpu_to_le32(0x08000000 | 192);
+		tp->tx_ring[tp->cur_tx].buffer1 = cpu_to_le32(mapping);
+		tp->tx_ring[tp->cur_tx].status = cpu_to_le32(DescOwned);
+
+		tp->cur_tx++;
+	}
+
+	tp->saved_if_port = dev->if_port;
+	if (dev->if_port == 0)
+		dev->if_port = tp->default_port;
+
+	/* Allow selecting a default media. */
+	i = 0;
+	if (tp->mtable == NULL)
+		goto media_picked;
+	if (dev->if_port) {
+		int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 :
+			(dev->if_port == 12 ? 0 : dev->if_port);
+		for (i = 0; i < tp->mtable->leafcount; i++)
+			if (tp->mtable->mleaf[i].media == looking_for) {
+				dev_info(&dev->dev,
+					 "Using user-specified media %s\n",
+					 medianame[dev->if_port]);
+				goto media_picked;
+			}
+	}
+	if ((tp->mtable->defaultmedia & 0x0800) == 0) {
+		int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
+		for (i = 0; i < tp->mtable->leafcount; i++)
+			if (tp->mtable->mleaf[i].media == looking_for) {
+				dev_info(&dev->dev,
+					 "Using EEPROM-set media %s\n",
+					 medianame[looking_for]);
+				goto media_picked;
+			}
+	}
+	/* Start sensing first non-full-duplex media. */
+	for (i = tp->mtable->leafcount - 1;
+		 (tulip_media_cap[tp->mtable->mleaf[i].media] & MediaAlwaysFD) && i > 0; i--)
+		;
+media_picked:
+
+	tp->csr6 = 0;
+	tp->cur_index = i;
+	tp->nwayset = 0;
+
+	if (dev->if_port) {
+		if (tp->chip_id == DC21143  &&
+		    (tulip_media_cap[dev->if_port] & MediaIsMII)) {
+			/* We must reset the media CSRs when we force-select MII mode. */
+			iowrite32(0x0000, ioaddr + CSR13);
+			iowrite32(0x0000, ioaddr + CSR14);
+			iowrite32(0x0008, ioaddr + CSR15);
+		}
+		tulip_select_media(dev, 1);
+	} else if (tp->chip_id == DC21142) {
+		if (tp->mii_cnt) {
+			tulip_select_media(dev, 1);
+			if (tulip_debug > 1)
+				dev_info(&dev->dev,
+					 "Using MII transceiver %d, status %04x\n",
+					 tp->phys[0],
+					 tulip_mdio_read(dev, tp->phys[0], 1));
+			iowrite32(csr6_mask_defstate, ioaddr + CSR6);
+			tp->csr6 = csr6_mask_hdcap;
+			dev->if_port = 11;
+			iowrite32(0x0000, ioaddr + CSR13);
+			iowrite32(0x0000, ioaddr + CSR14);
+		} else
+			t21142_start_nway(dev);
+	} else if (tp->chip_id == PNIC2) {
+	        /* for initial startup advertise 10/100 Full and Half */
+	        tp->sym_advertise = 0x01E0;
+                /* enable autonegotiate end interrupt */
+	        iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5);
+	        iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7);
+		pnic2_start_nway(dev);
+	} else if (tp->chip_id == LC82C168  &&  ! tp->medialock) {
+		if (tp->mii_cnt) {
+			dev->if_port = 11;
+			tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0);
+			iowrite32(0x0001, ioaddr + CSR15);
+		} else if (ioread32(ioaddr + CSR5) & TPLnkPass)
+			pnic_do_nway(dev);
+		else {
+			/* Start with 10mbps to do autonegotiation. */
+			iowrite32(0x32, ioaddr + CSR12);
+			tp->csr6 = 0x00420000;
+			iowrite32(0x0001B078, ioaddr + 0xB8);
+			iowrite32(0x0201B078, ioaddr + 0xB8);
+			next_tick = 1*HZ;
+		}
+	} else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) &&
+		   ! tp->medialock) {
+		dev->if_port = 0;
+		tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0);
+		iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
+	} else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) {
+		/* Provided by BOLO, Macronix - 12/10/1998. */
+		dev->if_port = 0;
+		tp->csr6 = 0x01a80200;
+		iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
+		iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0);
+	} else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) {
+		/* Enable automatic Tx underrun recovery. */
+		iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
+		dev->if_port = tp->mii_cnt ? 11 : 0;
+		tp->csr6 = 0x00040000;
+	} else if (tp->chip_id == AX88140) {
+		tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100;
+	} else
+		tulip_select_media(dev, 1);
+
+	/* Start the chip's Tx to process setup frame. */
+	tulip_stop_rxtx(tp);
+	barrier();
+	udelay(5);
+	iowrite32(tp->csr6 | TxOn, ioaddr + CSR6);
+
+	/* Enable interrupts by setting the interrupt mask. */
+	iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
+	iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
+	tulip_start_rxtx(tp);
+	iowrite32(0, ioaddr + CSR2);		/* Rx poll demand */
+
+	if (tulip_debug > 2) {
+		netdev_dbg(dev, "Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
+			   ioread32(ioaddr + CSR0),
+			   ioread32(ioaddr + CSR5),
+			   ioread32(ioaddr + CSR6));
+	}
+
+	/* Set the timer to switch to check for link beat and perhaps switch
+	   to an alternate media type. */
+	tp->timer.expires = RUN_AT(next_tick);
+	add_timer(&tp->timer);
+#ifdef CONFIG_TULIP_NAPI
+	init_timer(&tp->oom_timer);
+        tp->oom_timer.data = (unsigned long)dev;
+        tp->oom_timer.function = oom_timer;
+#endif
+}
+
+static int
+tulip_open(struct net_device *dev)
+{
+	int retval;
+
+	tulip_init_ring (dev);
+
+	retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev);
+	if (retval)
+		goto free_ring;
+
+	tulip_up (dev);
+
+	netif_start_queue (dev);
+
+	return 0;
+
+free_ring:
+	tulip_free_ring (dev);
+	return retval;
+}
+
+
+static void tulip_tx_timeout(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	unsigned long flags;
+
+	spin_lock_irqsave (&tp->lock, flags);
+
+	if (tulip_media_cap[dev->if_port] & MediaIsMII) {
+		/* Do nothing -- the media monitor should handle this. */
+		if (tulip_debug > 1)
+			dev_warn(&dev->dev,
+				 "Transmit timeout using MII device\n");
+	} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
+		   tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
+		   tp->chip_id == DM910X) {
+		dev_warn(&dev->dev,
+			 "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
+			 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
+			 ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
+			 ioread32(ioaddr + CSR15));
+		tp->timeout_recovery = 1;
+		schedule_work(&tp->media_work);
+		goto out_unlock;
+	} else if (tp->chip_id == PNIC2) {
+		dev_warn(&dev->dev,
+			 "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
+			 (int)ioread32(ioaddr + CSR5),
+			 (int)ioread32(ioaddr + CSR6),
+			 (int)ioread32(ioaddr + CSR7),
+			 (int)ioread32(ioaddr + CSR12));
+	} else {
+		dev_warn(&dev->dev,
+			 "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
+			 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
+		dev->if_port = 0;
+	}
+
+#if defined(way_too_many_messages)
+	if (tulip_debug > 3) {
+		int i;
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
+			int j;
+			printk(KERN_DEBUG
+			       "%2d: %08x %08x %08x %08x  %02x %02x %02x\n",
+			       i,
+			       (unsigned int)tp->rx_ring[i].status,
+			       (unsigned int)tp->rx_ring[i].length,
+			       (unsigned int)tp->rx_ring[i].buffer1,
+			       (unsigned int)tp->rx_ring[i].buffer2,
+			       buf[0], buf[1], buf[2]);
+			for (j = 0; buf[j] != 0xee && j < 1600; j++)
+				if (j < 100)
+					pr_cont(" %02x", buf[j]);
+			pr_cont(" j=%d\n", j);
+		}
+		printk(KERN_DEBUG "  Rx ring %p: ", tp->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++)
+			pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
+		printk(KERN_DEBUG "  Tx ring %p: ", tp->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
+		pr_cont("\n");
+	}
+#endif
+
+	tulip_tx_timeout_complete(tp, ioaddr);
+
+out_unlock:
+	spin_unlock_irqrestore (&tp->lock, flags);
+	dev->trans_start = jiffies; /* prevent tx timeout */
+	netif_wake_queue (dev);
+}
+
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void tulip_init_ring(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int i;
+
+	tp->susp_rx = 0;
+	tp->ttimer = 0;
+	tp->nir = 0;
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		tp->rx_ring[i].status = 0x00000000;
+		tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ);
+		tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1));
+		tp->rx_buffers[i].skb = NULL;
+		tp->rx_buffers[i].mapping = 0;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP);
+	tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma);
+
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		dma_addr_t mapping;
+
+		/* Note the receive buffer must be longword aligned.
+		   dev_alloc_skb() provides 16 byte alignment.  But do *not*
+		   use skb_reserve() to align the IP header! */
+		struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ);
+		tp->rx_buffers[i].skb = skb;
+		if (skb == NULL)
+			break;
+		mapping = pci_map_single(tp->pdev, skb->data,
+					 PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+		tp->rx_buffers[i].mapping = mapping;
+		skb->dev = dev;			/* Mark as being used by this device. */
+		tp->rx_ring[i].status = cpu_to_le32(DescOwned);	/* Owned by Tulip chip */
+		tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
+	}
+	tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+	/* The Tx buffer descriptor is filled in as needed, but we
+	   do need to clear the ownership bit. */
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		tp->tx_buffers[i].skb = NULL;
+		tp->tx_buffers[i].mapping = 0;
+		tp->tx_ring[i].status = 0x00000000;
+		tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1));
+	}
+	tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
+}
+
+static netdev_tx_t
+tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int entry;
+	u32 flag;
+	dma_addr_t mapping;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->lock, flags);
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = tp->cur_tx % TX_RING_SIZE;
+
+	tp->tx_buffers[entry].skb = skb;
+	mapping = pci_map_single(tp->pdev, skb->data,
+				 skb->len, PCI_DMA_TODEVICE);
+	tp->tx_buffers[entry].mapping = mapping;
+	tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
+
+	if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
+		flag = 0x60000000; /* No interrupt */
+	} else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
+		flag = 0xe0000000; /* Tx-done intr. */
+	} else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
+		flag = 0x60000000; /* No Tx-done intr. */
+	} else {		/* Leave room for set_rx_mode() to fill entries. */
+		flag = 0xe0000000; /* Tx-done intr. */
+		netif_stop_queue(dev);
+	}
+	if (entry == TX_RING_SIZE-1)
+		flag = 0xe0000000 | DESC_RING_WRAP;
+
+	tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag);
+	/* if we were using Transmit Automatic Polling, we would need a
+	 * wmb() here. */
+	tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
+	wmb();
+
+	tp->cur_tx++;
+
+	/* Trigger an immediate transmit demand. */
+	iowrite32(0, tp->base_addr + CSR1);
+
+	spin_unlock_irqrestore(&tp->lock, flags);
+
+	return NETDEV_TX_OK;
+}
+
+static void tulip_clean_tx_ring(struct tulip_private *tp)
+{
+	unsigned int dirty_tx;
+
+	for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0;
+		dirty_tx++) {
+		int entry = dirty_tx % TX_RING_SIZE;
+		int status = le32_to_cpu(tp->tx_ring[entry].status);
+
+		if (status < 0) {
+			tp->dev->stats.tx_errors++;	/* It wasn't Txed */
+			tp->tx_ring[entry].status = 0;
+		}
+
+		/* Check for Tx filter setup frames. */
+		if (tp->tx_buffers[entry].skb == NULL) {
+			/* test because dummy frames not mapped */
+			if (tp->tx_buffers[entry].mapping)
+				pci_unmap_single(tp->pdev,
+					tp->tx_buffers[entry].mapping,
+					sizeof(tp->setup_frame),
+					PCI_DMA_TODEVICE);
+			continue;
+		}
+
+		pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
+				tp->tx_buffers[entry].skb->len,
+				PCI_DMA_TODEVICE);
+
+		/* Free the original skb. */
+		dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
+		tp->tx_buffers[entry].skb = NULL;
+		tp->tx_buffers[entry].mapping = 0;
+	}
+}
+
+static void tulip_down (struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	unsigned long flags;
+
+	cancel_work_sync(&tp->media_work);
+
+#ifdef CONFIG_TULIP_NAPI
+	napi_disable(&tp->napi);
+#endif
+
+	del_timer_sync (&tp->timer);
+#ifdef CONFIG_TULIP_NAPI
+	del_timer_sync (&tp->oom_timer);
+#endif
+	spin_lock_irqsave (&tp->lock, flags);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	iowrite32 (0x00000000, ioaddr + CSR7);
+
+	/* Stop the Tx and Rx processes. */
+	tulip_stop_rxtx(tp);
+
+	/* prepare receive buffers */
+	tulip_refill_rx(dev);
+
+	/* release any unconsumed transmit buffers */
+	tulip_clean_tx_ring(tp);
+
+	if (ioread32(ioaddr + CSR6) != 0xffffffff)
+		dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+
+	spin_unlock_irqrestore (&tp->lock, flags);
+
+	init_timer(&tp->timer);
+	tp->timer.data = (unsigned long)dev;
+	tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
+
+	dev->if_port = tp->saved_if_port;
+
+	/* Leave the driver in snooze, not sleep, mode. */
+	tulip_set_power_state (tp, 0, 1);
+}
+
+static void tulip_free_ring (struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	int i;
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = tp->rx_buffers[i].skb;
+		dma_addr_t mapping = tp->rx_buffers[i].mapping;
+
+		tp->rx_buffers[i].skb = NULL;
+		tp->rx_buffers[i].mapping = 0;
+
+		tp->rx_ring[i].status = 0;	/* Not owned by Tulip chip. */
+		tp->rx_ring[i].length = 0;
+		/* An invalid address. */
+		tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0);
+		if (skb) {
+			pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
+					 PCI_DMA_FROMDEVICE);
+			dev_kfree_skb (skb);
+		}
+	}
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		struct sk_buff *skb = tp->tx_buffers[i].skb;
+
+		if (skb != NULL) {
+			pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping,
+					 skb->len, PCI_DMA_TODEVICE);
+			dev_kfree_skb (skb);
+		}
+		tp->tx_buffers[i].skb = NULL;
+		tp->tx_buffers[i].mapping = 0;
+	}
+}
+
+static int tulip_close (struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+
+	netif_stop_queue (dev);
+
+	tulip_down (dev);
+
+	if (tulip_debug > 1)
+		netdev_dbg(dev, "Shutting down ethercard, status was %02x\n",
+			   ioread32 (ioaddr + CSR5));
+
+	free_irq (dev->irq, dev);
+
+	tulip_free_ring (dev);
+
+	return 0;
+}
+
+static struct net_device_stats *tulip_get_stats(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+
+	if (netif_running(dev)) {
+		unsigned long flags;
+
+		spin_lock_irqsave (&tp->lock, flags);
+
+		dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
+
+		spin_unlock_irqrestore(&tp->lock, flags);
+	}
+
+	return &dev->stats;
+}
+
+
+static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct tulip_private *np = netdev_priv(dev);
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(np->pdev));
+}
+
+
+static int tulip_ethtool_set_wol(struct net_device *dev,
+				 struct ethtool_wolinfo *wolinfo)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+
+	if (wolinfo->wolopts & (~tp->wolinfo.supported))
+		   return -EOPNOTSUPP;
+
+	tp->wolinfo.wolopts = wolinfo->wolopts;
+	device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts);
+	return 0;
+}
+
+static void tulip_ethtool_get_wol(struct net_device *dev,
+				  struct ethtool_wolinfo *wolinfo)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+
+	wolinfo->supported = tp->wolinfo.supported;
+	wolinfo->wolopts = tp->wolinfo.wolopts;
+	return;
+}
+
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = tulip_get_drvinfo,
+	.set_wol     = tulip_ethtool_set_wol,
+	.get_wol     = tulip_ethtool_get_wol,
+};
+
+/* Provide ioctl() calls to examine the MII xcvr state. */
+static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	struct mii_ioctl_data *data = if_mii(rq);
+	const unsigned int phy_idx = 0;
+	int phy = tp->phys[phy_idx] & 0x1f;
+	unsigned int regnum = data->reg_num;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+		if (tp->mii_cnt)
+			data->phy_id = phy;
+		else if (tp->flags & HAS_NWAY)
+			data->phy_id = 32;
+		else if (tp->chip_id == COMET)
+			data->phy_id = 1;
+		else
+			return -ENODEV;
+
+	case SIOCGMIIREG:		/* Read MII PHY register. */
+		if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
+			int csr12 = ioread32 (ioaddr + CSR12);
+			int csr14 = ioread32 (ioaddr + CSR14);
+			switch (regnum) {
+			case 0:
+                                if (((csr14<<5) & 0x1000) ||
+                                        (dev->if_port == 5 && tp->nwayset))
+                                        data->val_out = 0x1000;
+                                else
+                                        data->val_out = (tulip_media_cap[dev->if_port]&MediaIs100 ? 0x2000 : 0)
+                                                | (tulip_media_cap[dev->if_port]&MediaIsFD ? 0x0100 : 0);
+				break;
+			case 1:
+                                data->val_out =
+					0x1848 +
+					((csr12&0x7000) == 0x5000 ? 0x20 : 0) +
+					((csr12&0x06) == 6 ? 0 : 4);
+                                data->val_out |= 0x6048;
+				break;
+			case 4:
+                                /* Advertised value, bogus 10baseTx-FD value from CSR6. */
+                                data->val_out =
+					((ioread32(ioaddr + CSR6) >> 3) & 0x0040) +
+					((csr14 >> 1) & 0x20) + 1;
+                                data->val_out |= ((csr14 >> 9) & 0x03C0);
+				break;
+			case 5: data->val_out = tp->lpar; break;
+			default: data->val_out = 0; break;
+			}
+		} else {
+			data->val_out = tulip_mdio_read (dev, data->phy_id & 0x1f, regnum);
+		}
+		return 0;
+
+	case SIOCSMIIREG:		/* Write MII PHY register. */
+		if (regnum & ~0x1f)
+			return -EINVAL;
+		if (data->phy_id == phy) {
+			u16 value = data->val_in;
+			switch (regnum) {
+			case 0:	/* Check for autonegotiation on or reset. */
+				tp->full_duplex_lock = (value & 0x9000) ? 0 : 1;
+				if (tp->full_duplex_lock)
+					tp->full_duplex = (value & 0x0100) ? 1 : 0;
+				break;
+			case 4:
+				tp->advertising[phy_idx] =
+				tp->mii_advertise = data->val_in;
+				break;
+			}
+		}
+		if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
+			u16 value = data->val_in;
+			if (regnum == 0) {
+			  if ((value & 0x1200) == 0x1200) {
+			    if (tp->chip_id == PNIC2) {
+                                   pnic2_start_nway (dev);
+                            } else {
+				   t21142_start_nway (dev);
+                            }
+			  }
+			} else if (regnum == 4)
+				tp->sym_advertise = value;
+		} else {
+			tulip_mdio_write (dev, data->phy_id & 0x1f, regnum, data->val_in);
+		}
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+
+/* Set or clear the multicast filter for this adaptor.
+   Note that we only use exclusion around actually queueing the
+   new frame, not around filling tp->setup_frame.  This is non-deterministic
+   when re-entered but still correct. */
+
+#undef set_bit_le
+#define set_bit_le(i,p) do { ((char *)(p))[(i)/8] |= (1<<((i)%8)); } while(0)
+
+static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	u16 hash_table[32];
+	struct netdev_hw_addr *ha;
+	int i;
+	u16 *eaddrs;
+
+	memset(hash_table, 0, sizeof(hash_table));
+	set_bit_le(255, hash_table); 			/* Broadcast entry */
+	/* This should work on big-endian machines as well. */
+	netdev_for_each_mc_addr(ha, dev) {
+		int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff;
+
+		set_bit_le(index, hash_table);
+	}
+	for (i = 0; i < 32; i++) {
+		*setup_frm++ = hash_table[i];
+		*setup_frm++ = hash_table[i];
+	}
+	setup_frm = &tp->setup_frame[13*6];
+
+	/* Fill the final entry with our physical address. */
+	eaddrs = (u16 *)dev->dev_addr;
+	*setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+	*setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+	*setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+}
+
+static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+	u16 *eaddrs;
+
+	/* We have <= 14 addresses so we can use the wonderful
+	   16 address perfect filtering of the Tulip. */
+	netdev_for_each_mc_addr(ha, dev) {
+		eaddrs = (u16 *) ha->addr;
+		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+		*setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
+	}
+	/* Fill the unused entries with the broadcast address. */
+	memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
+	setup_frm = &tp->setup_frame[15*6];
+
+	/* Fill the final entry with our physical address. */
+	eaddrs = (u16 *)dev->dev_addr;
+	*setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
+	*setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
+	*setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
+}
+
+
+static void set_rx_mode(struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int csr6;
+
+	csr6 = ioread32(ioaddr + CSR6) & ~0x00D5;
+
+	tp->csr6 &= ~0x00D5;
+	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
+		tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
+		csr6 |= AcceptAllMulticast | AcceptAllPhys;
+	} else if ((netdev_mc_count(dev) > 1000) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter well -- accept all multicasts. */
+		tp->csr6 |= AcceptAllMulticast;
+		csr6 |= AcceptAllMulticast;
+	} else	if (tp->flags & MC_HASH_ONLY) {
+		/* Some work-alikes have only a 64-entry hash filter table. */
+		/* Should verify correctness on big-endian/__powerpc__ */
+		struct netdev_hw_addr *ha;
+		if (netdev_mc_count(dev) > 64) {
+			/* Arbitrary non-effective limit. */
+			tp->csr6 |= AcceptAllMulticast;
+			csr6 |= AcceptAllMulticast;
+		} else {
+			u32 mc_filter[2] = {0, 0};		 /* Multicast hash filter */
+			int filterbit;
+			netdev_for_each_mc_addr(ha, dev) {
+				if (tp->flags & COMET_MAC_ADDR)
+					filterbit = ether_crc_le(ETH_ALEN,
+								 ha->addr);
+				else
+					filterbit = ether_crc(ETH_ALEN,
+							      ha->addr) >> 26;
+				filterbit &= 0x3f;
+				mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
+				if (tulip_debug > 2)
+					dev_info(&dev->dev,
+						 "Added filter for %pM  %08x bit %d\n",
+						 ha->addr,
+						 ether_crc(ETH_ALEN, ha->addr),
+						 filterbit);
+			}
+			if (mc_filter[0] == tp->mc_filter[0]  &&
+				mc_filter[1] == tp->mc_filter[1])
+				;				/* No change. */
+			else if (tp->flags & IS_ASIX) {
+				iowrite32(2, ioaddr + CSR13);
+				iowrite32(mc_filter[0], ioaddr + CSR14);
+				iowrite32(3, ioaddr + CSR13);
+				iowrite32(mc_filter[1], ioaddr + CSR14);
+			} else if (tp->flags & COMET_MAC_ADDR) {
+				iowrite32(mc_filter[0], ioaddr + CSR27);
+				iowrite32(mc_filter[1], ioaddr + CSR28);
+			}
+			tp->mc_filter[0] = mc_filter[0];
+			tp->mc_filter[1] = mc_filter[1];
+		}
+	} else {
+		unsigned long flags;
+		u32 tx_flags = 0x08000000 | 192;
+
+		/* Note that only the low-address shortword of setup_frame is valid!
+		   The values are doubled for big-endian architectures. */
+		if (netdev_mc_count(dev) > 14) {
+			/* Must use a multicast hash table. */
+			build_setup_frame_hash(tp->setup_frame, dev);
+			tx_flags = 0x08400000 | 192;
+		} else {
+			build_setup_frame_perfect(tp->setup_frame, dev);
+		}
+
+		spin_lock_irqsave(&tp->lock, flags);
+
+		if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) {
+			/* Same setup recently queued, we need not add it. */
+		} else {
+			unsigned int entry;
+			int dummy = -1;
+
+			/* Now add this frame to the Tx list. */
+
+			entry = tp->cur_tx++ % TX_RING_SIZE;
+
+			if (entry != 0) {
+				/* Avoid a chip errata by prefixing a dummy entry. */
+				tp->tx_buffers[entry].skb = NULL;
+				tp->tx_buffers[entry].mapping = 0;
+				tp->tx_ring[entry].length =
+					(entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
+				tp->tx_ring[entry].buffer1 = 0;
+				/* Must set DescOwned later to avoid race with chip */
+				dummy = entry;
+				entry = tp->cur_tx++ % TX_RING_SIZE;
+
+			}
+
+			tp->tx_buffers[entry].skb = NULL;
+			tp->tx_buffers[entry].mapping =
+				pci_map_single(tp->pdev, tp->setup_frame,
+					       sizeof(tp->setup_frame),
+					       PCI_DMA_TODEVICE);
+			/* Put the setup frame on the Tx list. */
+			if (entry == TX_RING_SIZE-1)
+				tx_flags |= DESC_RING_WRAP;		/* Wrap ring. */
+			tp->tx_ring[entry].length = cpu_to_le32(tx_flags);
+			tp->tx_ring[entry].buffer1 =
+				cpu_to_le32(tp->tx_buffers[entry].mapping);
+			tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
+			if (dummy >= 0)
+				tp->tx_ring[dummy].status = cpu_to_le32(DescOwned);
+			if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2)
+				netif_stop_queue(dev);
+
+			/* Trigger an immediate transmit demand. */
+			iowrite32(0, ioaddr + CSR1);
+		}
+
+		spin_unlock_irqrestore(&tp->lock, flags);
+	}
+
+	iowrite32(csr6, ioaddr + CSR6);
+}
+
+#ifdef CONFIG_TULIP_MWI
+static void __devinit tulip_mwi_config (struct pci_dev *pdev,
+					struct net_device *dev)
+{
+	struct tulip_private *tp = netdev_priv(dev);
+	u8 cache;
+	u16 pci_command;
+	u32 csr0;
+
+	if (tulip_debug > 3)
+		netdev_dbg(dev, "tulip_mwi_config()\n");
+
+	tp->csr0 = csr0 = 0;
+
+	/* if we have any cache line size at all, we can do MRM and MWI */
+	csr0 |= MRM | MWI;
+
+	/* Enable MWI in the standard PCI command bit.
+	 * Check for the case where MWI is desired but not available
+	 */
+	pci_try_set_mwi(pdev);
+
+	/* read result from hardware (in case bit refused to enable) */
+	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
+	if ((csr0 & MWI) && (!(pci_command & PCI_COMMAND_INVALIDATE)))
+		csr0 &= ~MWI;
+
+	/* if cache line size hardwired to zero, no MWI */
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache);
+	if ((csr0 & MWI) && (cache == 0)) {
+		csr0 &= ~MWI;
+		pci_clear_mwi(pdev);
+	}
+
+	/* assign per-cacheline-size cache alignment and
+	 * burst length values
+	 */
+	switch (cache) {
+	case 8:
+		csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift);
+		break;
+	case 16:
+		csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift);
+		break;
+	case 32:
+		csr0 |= MRL | (3 << CALShift) | (32 << BurstLenShift);
+		break;
+	default:
+		cache = 0;
+		break;
+	}
+
+	/* if we have a good cache line size, we by now have a good
+	 * csr0, so save it and exit
+	 */
+	if (cache)
+		goto out;
+
+	/* we don't have a good csr0 or cache line size, disable MWI */
+	if (csr0 & MWI) {
+		pci_clear_mwi(pdev);
+		csr0 &= ~MWI;
+	}
+
+	/* sane defaults for burst length and cache alignment
+	 * originally from de4x5 driver
+	 */
+	csr0 |= (8 << BurstLenShift) | (1 << CALShift);
+
+out:
+	tp->csr0 = csr0;
+	if (tulip_debug > 2)
+		netdev_dbg(dev, "MWI config cacheline=%d, csr0=%08x\n",
+			   cache, csr0);
+}
+#endif
+
+/*
+ *	Chips that have the MRM/reserved bit quirk and the burst quirk. That
+ *	is the DM910X and the on chip ULi devices
+ */
+
+static int tulip_uli_dm_quirk(struct pci_dev *pdev)
+{
+	if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
+		return 1;
+	return 0;
+}
+
+static const struct net_device_ops tulip_netdev_ops = {
+	.ndo_open		= tulip_open,
+	.ndo_start_xmit		= tulip_start_xmit,
+	.ndo_tx_timeout		= tulip_tx_timeout,
+	.ndo_stop		= tulip_close,
+	.ndo_get_stats		= tulip_get_stats,
+	.ndo_do_ioctl 		= private_ioctl,
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	 = poll_tulip,
+#endif
+};
+
+DEFINE_PCI_DEVICE_TABLE(early_486_chipsets) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
+	{ },
+};
+
+static int __devinit tulip_init_one (struct pci_dev *pdev,
+				     const struct pci_device_id *ent)
+{
+	struct tulip_private *tp;
+	/* See note below on the multiport cards. */
+	static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'};
+	static int last_irq;
+	static int multiport_cnt;	/* For four-port boards w/one EEPROM */
+	int i, irq;
+	unsigned short sum;
+	unsigned char *ee_data;
+	struct net_device *dev;
+	void __iomem *ioaddr;
+	static int board_idx = -1;
+	int chip_idx = ent->driver_data;
+	const char *chip_name = tulip_tbl[chip_idx].chip_name;
+	unsigned int eeprom_missing = 0;
+	unsigned int force_csr0 = 0;
+
+#ifndef MODULE
+	if (tulip_debug > 0)
+		printk_once(KERN_INFO "%s", version);
+#endif
+
+	board_idx++;
+
+	/*
+	 *	Lan media wire a tulip chip to a wan interface. Needs a very
+	 *	different driver (lmc driver)
+	 */
+
+        if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
+		pr_err("skipping LMC card\n");
+		return -ENODEV;
+	} else if (pdev->subsystem_vendor == PCI_VENDOR_ID_SBE &&
+		   (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_T3E3 ||
+		    pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0 ||
+		    pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)) {
+		pr_err("skipping SBE T3E3 port\n");
+		return -ENODEV;
+	}
+
+	/*
+	 *	DM910x chips should be handled by the dmfe driver, except
+	 *	on-board chips on SPARC systems.  Also, early DM9100s need
+	 *	software CRC which only the dmfe driver supports.
+	 */
+
+#ifdef CONFIG_TULIP_DM910X
+	if (chip_idx == DM910X) {
+		struct device_node *dp;
+
+		if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
+		    pdev->revision < 0x30) {
+			pr_info("skipping early DM9100 with Crc bug (use dmfe)\n");
+			return -ENODEV;
+		}
+
+		dp = pci_device_to_OF_node(pdev);
+		if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
+			pr_info("skipping DM910x expansion card (use dmfe)\n");
+			return -ENODEV;
+		}
+	}
+#endif
+
+	/*
+	 *	Looks for early PCI chipsets where people report hangs
+	 *	without the workarounds being on.
+	 */
+
+	/* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache
+	      aligned.  Aries might need this too. The Saturn errata are not
+	      pretty reading but thankfully it's an old 486 chipset.
+
+	   2. The dreaded SiS496 486 chipset. Same workaround as Intel
+	      Saturn.
+	*/
+
+	if (pci_dev_present(early_486_chipsets)) {
+		csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift);
+		force_csr0 = 1;
+	}
+
+	/* bugfix: the ASIX must have a burst limit or horrible things happen. */
+	if (chip_idx == AX88140) {
+		if ((csr0 & 0x3f00) == 0)
+			csr0 |= 0x2000;
+	}
+
+	/* PNIC doesn't have MWI/MRL/MRM... */
+	if (chip_idx == LC82C168)
+		csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */
+
+	/* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */
+	if (tulip_uli_dm_quirk(pdev)) {
+		csr0 &= ~0x01f100ff;
+#if defined(CONFIG_SPARC)
+                csr0 = (csr0 & ~0xff00) | 0xe000;
+#endif
+	}
+	/*
+	 *	And back to business
+	 */
+
+	i = pci_enable_device(pdev);
+	if (i) {
+		pr_err("Cannot enable tulip board #%d, aborting\n", board_idx);
+		return i;
+	}
+
+	/* The chip will fail to enter a low-power state later unless
+	 * first explicitly commanded into D0 */
+	if (pci_set_power_state(pdev, PCI_D0)) {
+		pr_notice("Failed to set power state to D0\n");
+	}
+
+	irq = pdev->irq;
+
+	/* alloc_etherdev ensures aligned and zeroed private structures */
+	dev = alloc_etherdev (sizeof (*tp));
+	if (!dev) {
+		pr_err("ether device alloc failed, aborting\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
+		pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
+		       pci_name(pdev),
+		       (unsigned long long)pci_resource_len (pdev, 0),
+		       (unsigned long long)pci_resource_start (pdev, 0));
+		goto err_out_free_netdev;
+	}
+
+	/* grab all resources from both PIO and MMIO regions, as we
+	 * don't want anyone else messing around with our hardware */
+	if (pci_request_regions (pdev, DRV_NAME))
+		goto err_out_free_netdev;
+
+	ioaddr =  pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
+
+	if (!ioaddr)
+		goto err_out_free_res;
+
+	/*
+	 * initialize private data structure 'tp'
+	 * it is zeroed and aligned in alloc_etherdev
+	 */
+	tp = netdev_priv(dev);
+	tp->dev = dev;
+
+	tp->rx_ring = pci_alloc_consistent(pdev,
+					   sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
+					   sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
+					   &tp->rx_ring_dma);
+	if (!tp->rx_ring)
+		goto err_out_mtable;
+	tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
+	tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
+
+	tp->chip_id = chip_idx;
+	tp->flags = tulip_tbl[chip_idx].flags;
+
+	tp->wolinfo.supported = 0;
+	tp->wolinfo.wolopts = 0;
+	/* COMET: Enable power management only for AN983B */
+	if (chip_idx == COMET ) {
+		u32 sig;
+		pci_read_config_dword (pdev, 0x80, &sig);
+		if (sig == 0x09811317) {
+			tp->flags |= COMET_PM;
+			tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC;
+			pr_info("%s: Enabled WOL support for AN983B\n",
+				__func__);
+		}
+	}
+	tp->pdev = pdev;
+	tp->base_addr = ioaddr;
+	tp->revision = pdev->revision;
+	tp->csr0 = csr0;
+	spin_lock_init(&tp->lock);
+	spin_lock_init(&tp->mii_lock);
+	init_timer(&tp->timer);
+	tp->timer.data = (unsigned long)dev;
+	tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
+
+	INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);
+
+	dev->base_addr = (unsigned long)ioaddr;
+
+#ifdef CONFIG_TULIP_MWI
+	if (!force_csr0 && (tp->flags & HAS_PCI_MWI))
+		tulip_mwi_config (pdev, dev);
+#endif
+
+	/* Stop the chip's Tx and Rx processes. */
+	tulip_stop_rxtx(tp);
+
+	pci_set_master(pdev);
+
+#ifdef CONFIG_GSC
+	if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) {
+		switch (pdev->subsystem_device) {
+		default:
+			break;
+		case 0x1061:
+		case 0x1062:
+		case 0x1063:
+		case 0x1098:
+		case 0x1099:
+		case 0x10EE:
+			tp->flags |= HAS_SWAPPED_SEEPROM | NEEDS_FAKE_MEDIA_TABLE;
+			chip_name = "GSC DS21140 Tulip";
+		}
+	}
+#endif
+
+	/* Clear the missed-packet counter. */
+	ioread32(ioaddr + CSR8);
+
+	/* The station address ROM is read byte serially.  The register must
+	   be polled, waiting for the value to be read bit serially from the
+	   EEPROM.
+	   */
+	ee_data = tp->eeprom;
+	memset(ee_data, 0, sizeof(tp->eeprom));
+	sum = 0;
+	if (chip_idx == LC82C168) {
+		for (i = 0; i < 3; i++) {
+			int value, boguscnt = 100000;
+			iowrite32(0x600 | i, ioaddr + 0x98);
+			do {
+				value = ioread32(ioaddr + CSR9);
+			} while (value < 0  && --boguscnt > 0);
+			put_unaligned_le16(value, ((__le16 *)dev->dev_addr) + i);
+			sum += value & 0xffff;
+		}
+	} else if (chip_idx == COMET) {
+		/* No need to read the EEPROM. */
+		put_unaligned_le32(ioread32(ioaddr + 0xA4), dev->dev_addr);
+		put_unaligned_le16(ioread32(ioaddr + 0xA8), dev->dev_addr + 4);
+		for (i = 0; i < 6; i ++)
+			sum += dev->dev_addr[i];
+	} else {
+		/* A serial EEPROM interface, we read now and sort it out later. */
+		int sa_offset = 0;
+		int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+		int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
+
+		if (ee_max_addr > sizeof(tp->eeprom))
+			ee_max_addr = sizeof(tp->eeprom);
+
+		for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
+			u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
+			ee_data[i] = data & 0xff;
+			ee_data[i + 1] = data >> 8;
+		}
+
+		/* DEC now has a specification (see Notes) but early board makers
+		   just put the address in the first EEPROM locations. */
+		/* This does  memcmp(ee_data, ee_data+16, 8) */
+		for (i = 0; i < 8; i ++)
+			if (ee_data[i] != ee_data[16+i])
+				sa_offset = 20;
+		if (chip_idx == CONEXANT) {
+			/* Check that the tuple type and length is correct. */
+			if (ee_data[0x198] == 0x04  &&  ee_data[0x199] == 6)
+				sa_offset = 0x19A;
+		} else if (ee_data[0] == 0xff  &&  ee_data[1] == 0xff &&
+				   ee_data[2] == 0) {
+			sa_offset = 2;		/* Grrr, damn Matrox boards. */
+			multiport_cnt = 4;
+		}
+#ifdef CONFIG_MIPS_COBALT
+               if ((pdev->bus->number == 0) &&
+                   ((PCI_SLOT(pdev->devfn) == 7) ||
+                    (PCI_SLOT(pdev->devfn) == 12))) {
+                       /* Cobalt MAC address in first EEPROM locations. */
+                       sa_offset = 0;
+		       /* Ensure our media table fixup get's applied */
+		       memcpy(ee_data + 16, ee_data, 8);
+               }
+#endif
+#ifdef CONFIG_GSC
+		/* Check to see if we have a broken srom */
+		if (ee_data[0] == 0x61 && ee_data[1] == 0x10) {
+			/* pci_vendor_id and subsystem_id are swapped */
+			ee_data[0] = ee_data[2];
+			ee_data[1] = ee_data[3];
+			ee_data[2] = 0x61;
+			ee_data[3] = 0x10;
+
+			/* HSC-PCI boards need to be byte-swaped and shifted
+			 * up 1 word.  This shift needs to happen at the end
+			 * of the MAC first because of the 2 byte overlap.
+			 */
+			for (i = 4; i >= 0; i -= 2) {
+				ee_data[17 + i + 3] = ee_data[17 + i];
+				ee_data[16 + i + 5] = ee_data[16 + i];
+			}
+		}
+#endif
+
+		for (i = 0; i < 6; i ++) {
+			dev->dev_addr[i] = ee_data[i + sa_offset];
+			sum += ee_data[i + sa_offset];
+		}
+	}
+	/* Lite-On boards have the address byte-swapped. */
+	if ((dev->dev_addr[0] == 0xA0 ||
+	     dev->dev_addr[0] == 0xC0 ||
+	     dev->dev_addr[0] == 0x02) &&
+	    dev->dev_addr[1] == 0x00)
+		for (i = 0; i < 6; i+=2) {
+			char tmp = dev->dev_addr[i];
+			dev->dev_addr[i] = dev->dev_addr[i+1];
+			dev->dev_addr[i+1] = tmp;
+		}
+	/* On the Zynx 315 Etherarray and other multiport boards only the
+	   first Tulip has an EEPROM.
+	   On Sparc systems the mac address is held in the OBP property
+	   "local-mac-address".
+	   The addresses of the subsequent ports are derived from the first.
+	   Many PCI BIOSes also incorrectly report the IRQ line, so we correct
+	   that here as well. */
+	if (sum == 0  || sum == 6*0xff) {
+#if defined(CONFIG_SPARC)
+		struct device_node *dp = pci_device_to_OF_node(pdev);
+		const unsigned char *addr;
+		int len;
+#endif
+		eeprom_missing = 1;
+		for (i = 0; i < 5; i++)
+			dev->dev_addr[i] = last_phys_addr[i];
+		dev->dev_addr[i] = last_phys_addr[i] + 1;
+#if defined(CONFIG_SPARC)
+		addr = of_get_property(dp, "local-mac-address", &len);
+		if (addr && len == 6)
+			memcpy(dev->dev_addr, addr, 6);
+#endif
+#if defined(__i386__) || defined(__x86_64__)	/* Patch up x86 BIOS bug. */
+		if (last_irq)
+			irq = last_irq;
+#endif
+	}
+
+	for (i = 0; i < 6; i++)
+		last_phys_addr[i] = dev->dev_addr[i];
+	last_irq = irq;
+	dev->irq = irq;
+
+	/* The lower four bits are the media type. */
+	if (board_idx >= 0  &&  board_idx < MAX_UNITS) {
+		if (options[board_idx] & MEDIA_MASK)
+			tp->default_port = options[board_idx] & MEDIA_MASK;
+		if ((options[board_idx] & FullDuplex) || full_duplex[board_idx] > 0)
+			tp->full_duplex = 1;
+		if (mtu[board_idx] > 0)
+			dev->mtu = mtu[board_idx];
+	}
+	if (dev->mem_start & MEDIA_MASK)
+		tp->default_port = dev->mem_start & MEDIA_MASK;
+	if (tp->default_port) {
+		pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
+			board_idx, medianame[tp->default_port & MEDIA_MASK]);
+		tp->medialock = 1;
+		if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
+			tp->full_duplex = 1;
+	}
+	if (tp->full_duplex)
+		tp->full_duplex_lock = 1;
+
+	if (tulip_media_cap[tp->default_port] & MediaIsMII) {
+		static const u16 media2advert[] = {
+			0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200
+		};
+		tp->mii_advertise = media2advert[tp->default_port - 9];
+		tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */
+	}
+
+	if (tp->flags & HAS_MEDIA_TABLE) {
+		sprintf(dev->name, DRV_NAME "%d", board_idx);	/* hack */
+		tulip_parse_eeprom(dev);
+		strcpy(dev->name, "eth%d");			/* un-hack */
+	}
+
+	if ((tp->flags & ALWAYS_CHECK_MII) ||
+		(tp->mtable  &&  tp->mtable->has_mii) ||
+		( ! tp->mtable  &&  (tp->flags & HAS_MII))) {
+		if (tp->mtable  &&  tp->mtable->has_mii) {
+			for (i = 0; i < tp->mtable->leafcount; i++)
+				if (tp->mtable->mleaf[i].media == 11) {
+					tp->cur_index = i;
+					tp->saved_if_port = dev->if_port;
+					tulip_select_media(dev, 2);
+					dev->if_port = tp->saved_if_port;
+					break;
+				}
+		}
+
+		/* Find the connected MII xcvrs.
+		   Doing this in open() would allow detecting external xcvrs
+		   later, but takes much time. */
+		tulip_find_mii (dev, board_idx);
+	}
+
+	/* The Tulip-specific entries in the device structure. */
+	dev->netdev_ops = &tulip_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_TULIP_NAPI
+	netif_napi_add(dev, &tp->napi, tulip_poll, 16);
+#endif
+	SET_ETHTOOL_OPS(dev, &ops);
+
+	if (register_netdev(dev))
+		goto err_out_free_ring;
+
+	pci_set_drvdata(pdev, dev);
+
+	dev_info(&dev->dev,
+#ifdef CONFIG_TULIP_MMIO
+		 "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
+#else
+		 "%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
+#endif
+		 chip_name, pdev->revision,
+		 (unsigned long long)pci_resource_start(pdev, TULIP_BAR),
+		 eeprom_missing ? " EEPROM not present," : "",
+		 dev->dev_addr, irq);
+
+        if (tp->chip_id == PNIC2)
+		tp->link_change = pnic2_lnk_change;
+	else if (tp->flags & HAS_NWAY)
+		tp->link_change = t21142_lnk_change;
+	else if (tp->flags & HAS_PNICNWAY)
+		tp->link_change = pnic_lnk_change;
+
+	/* Reset the xcvr interface and turn on heartbeat. */
+	switch (chip_idx) {
+	case DC21140:
+	case DM910X:
+	default:
+		if (tp->mtable)
+			iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
+		break;
+	case DC21142:
+		if (tp->mii_cnt  ||  tulip_media_cap[dev->if_port] & MediaIsMII) {
+			iowrite32(csr6_mask_defstate, ioaddr + CSR6);
+			iowrite32(0x0000, ioaddr + CSR13);
+			iowrite32(0x0000, ioaddr + CSR14);
+			iowrite32(csr6_mask_hdcap, ioaddr + CSR6);
+		} else
+			t21142_start_nway(dev);
+		break;
+	case PNIC2:
+	        /* just do a reset for sanity sake */
+		iowrite32(0x0000, ioaddr + CSR13);
+		iowrite32(0x0000, ioaddr + CSR14);
+		break;
+	case LC82C168:
+		if ( ! tp->mii_cnt) {
+			tp->nway = 1;
+			tp->nwayset = 0;
+			iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6);
+			iowrite32(0x30, ioaddr + CSR12);
+			iowrite32(0x0001F078, ioaddr + CSR6);
+			iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */
+		}
+		break;
+	case MX98713:
+	case COMPEX9881:
+		iowrite32(0x00000000, ioaddr + CSR6);
+		iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */
+		iowrite32(0x00000001, ioaddr + CSR13);
+		break;
+	case MX98715:
+	case MX98725:
+		iowrite32(0x01a80000, ioaddr + CSR6);
+		iowrite32(0xFFFFFFFF, ioaddr + CSR14);
+		iowrite32(0x00001000, ioaddr + CSR12);
+		break;
+	case COMET:
+		/* No initialization necessary. */
+		break;
+	}
+
+	/* put the chip in snooze mode until opened */
+	tulip_set_power_state (tp, 0, 1);
+
+	return 0;
+
+err_out_free_ring:
+	pci_free_consistent (pdev,
+			     sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+			     sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+			     tp->rx_ring, tp->rx_ring_dma);
+
+err_out_mtable:
+	kfree (tp->mtable);
+	pci_iounmap(pdev, ioaddr);
+
+err_out_free_res:
+	pci_release_regions (pdev);
+
+err_out_free_netdev:
+	free_netdev (dev);
+	return -ENODEV;
+}
+
+
+/* set the registers according to the given wolopts */
+static void tulip_set_wolopts (struct pci_dev *pdev, u32 wolopts)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+
+	if (tp->flags & COMET_PM) {
+	  
+		unsigned int tmp;
+			
+		tmp = ioread32(ioaddr + CSR18);
+		tmp &= ~(comet_csr18_pmes_sticky | comet_csr18_apm_mode | comet_csr18_d3a);
+		tmp |= comet_csr18_pm_mode;
+		iowrite32(tmp, ioaddr + CSR18);
+			
+		/* Set the Wake-up Control/Status Register to the given WOL options*/
+		tmp = ioread32(ioaddr + CSR13);
+		tmp &= ~(comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_wfre | comet_csr13_lsce | comet_csr13_mpre);
+		if (wolopts & WAKE_MAGIC)
+			tmp |= comet_csr13_mpre;
+		if (wolopts & WAKE_PHY)
+			tmp |= comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_lsce;
+		/* Clear the event flags */
+		tmp |= comet_csr13_wfr | comet_csr13_mpr | comet_csr13_lsc;
+		iowrite32(tmp, ioaddr + CSR13);
+	}
+}
+
+#ifdef CONFIG_PM
+
+
+static int tulip_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	pci_power_t pstate;
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct tulip_private *tp = netdev_priv(dev);
+
+	if (!dev)
+		return -EINVAL;
+
+	if (!netif_running(dev))
+		goto save_state;
+
+	tulip_down(dev);
+
+	netif_device_detach(dev);
+	free_irq(dev->irq, dev);
+
+save_state:
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pstate = pci_choose_state(pdev, state);
+	if (state.event == PM_EVENT_SUSPEND && pstate != PCI_D0) {
+		int rc;
+
+		tulip_set_wolopts(pdev, tp->wolinfo.wolopts);
+		rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts);
+		if (rc)
+			pr_err("pci_enable_wake failed (%d)\n", rc);
+	}
+	pci_set_power_state(pdev, pstate);
+
+	return 0;
+}
+
+
+static int tulip_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct tulip_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->base_addr;
+	int retval;
+	unsigned int tmp;
+
+	if (!dev)
+		return -EINVAL;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	if ((retval = pci_enable_device(pdev))) {
+		pr_err("pci_enable_device failed in resume\n");
+		return retval;
+	}
+
+	if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
+		pr_err("request_irq failed in resume\n");
+		return retval;
+	}
+
+	if (tp->flags & COMET_PM) {
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
+
+		/* Clear the PMES flag */
+		tmp = ioread32(ioaddr + CSR20);
+		tmp |= comet_csr20_pmes;
+		iowrite32(tmp, ioaddr + CSR20);
+
+		/* Disable all wake-up events */
+		tulip_set_wolopts(pdev, 0);
+	}
+	netif_device_attach(dev);
+
+	if (netif_running(dev))
+		tulip_up(dev);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+
+static void __devexit tulip_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct tulip_private *tp;
+
+	if (!dev)
+		return;
+
+	tp = netdev_priv(dev);
+	unregister_netdev(dev);
+	pci_free_consistent (pdev,
+			     sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
+			     sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
+			     tp->rx_ring, tp->rx_ring_dma);
+	kfree (tp->mtable);
+	pci_iounmap(pdev, tp->base_addr);
+	free_netdev (dev);
+	pci_release_regions (pdev);
+	pci_set_drvdata (pdev, NULL);
+
+	/* pci_power_off (pdev, -1); */
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void poll_tulip (struct net_device *dev)
+{
+	/* disable_irq here is not very nice, but with the lockless
+	   interrupt handler we have no other choice. */
+	disable_irq(dev->irq);
+	tulip_interrupt (dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static struct pci_driver tulip_driver = {
+	.name		= DRV_NAME,
+	.id_table	= tulip_pci_tbl,
+	.probe		= tulip_init_one,
+	.remove		= __devexit_p(tulip_remove_one),
+#ifdef CONFIG_PM
+	.suspend	= tulip_suspend,
+	.resume		= tulip_resume,
+#endif /* CONFIG_PM */
+};
+
+
+static int __init tulip_init (void)
+{
+#ifdef MODULE
+	pr_info("%s", version);
+#endif
+
+	/* copy module parms into globals */
+	tulip_rx_copybreak = rx_copybreak;
+	tulip_max_interrupt_work = max_interrupt_work;
+
+	/* probe for and init boards */
+	return pci_register_driver(&tulip_driver);
+}
+
+
+static void __exit tulip_cleanup (void)
+{
+	pci_unregister_driver (&tulip_driver);
+}
+
+
+module_init(tulip_init);
+module_exit(tulip_cleanup);
diff --git a/drivers/net/ethernet/dec/tulip/uli526x.c b/drivers/net/ethernet/dec/tulip/uli526x.c
new file mode 100644
index 000000000000..7a44a7a6adc8
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/uli526x.c
@@ -0,0 +1,1850 @@
+/*
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License
+    as published by the Free Software Foundation; either version 2
+    of the License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"uli526x"
+#define DRV_VERSION	"0.9.3"
+#define DRV_RELDATE	"2005-7-29"
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+
+/* Board/System/Debug information/definition ---------------- */
+#define PCI_ULI5261_ID  0x526110B9	/* ULi M5261 ID*/
+#define PCI_ULI5263_ID  0x526310B9	/* ULi M5263 ID*/
+
+#define ULI526X_IO_SIZE 0x100
+#define TX_DESC_CNT     0x20            /* Allocated Tx descriptors */
+#define RX_DESC_CNT     0x30            /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2)	/* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3)	/* TX wakeup count */
+#define DESC_ALL_CNT    (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC    0x600
+#define RX_ALLOC_SIZE   0x620
+#define ULI526X_RESET    1
+#define CR0_DEFAULT     0
+#define CR6_DEFAULT     0x22200000
+#define CR7_DEFAULT     0x180c1
+#define CR15_DEFAULT    0x06            /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK  0x4302          /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define ULI5261_MAX_MULTICAST 14
+#define RX_COPY_SIZE	100
+#define MAX_CHECK_PACKET 0x8000
+
+#define ULI526X_10MHF      0
+#define ULI526X_100MHF     1
+#define ULI526X_10MFD      4
+#define ULI526X_100MFD     5
+#define ULI526X_AUTO       8
+
+#define ULI526X_TXTH_72	0x400000	/* TX TH 72 byte */
+#define ULI526X_TXTH_96	0x404000	/* TX TH 96 byte */
+#define ULI526X_TXTH_128	0x0000		/* TX TH 128 byte */
+#define ULI526X_TXTH_256	0x4000		/* TX TH 256 byte */
+#define ULI526X_TXTH_512	0x8000		/* TX TH 512 byte */
+#define ULI526X_TXTH_1K	0xC000		/* TX TH 1K  byte */
+
+#define ULI526X_TIMER_WUT  (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define ULI526X_TX_TIMEOUT ((16*HZ)/2)	/* tx packet time-out time 8 s" */
+#define ULI526X_TX_KICK 	(4*HZ/2)	/* tx packet Kick-out time 2 s" */
+
+#define ULI526X_DBUG(dbug_now, msg, value)			\
+do {								\
+	if (uli526x_debug || (dbug_now))			\
+		pr_err("%s %lx\n", (msg), (long) (value));	\
+} while (0)
+
+#define SHOW_MEDIA_TYPE(mode)					\
+	pr_err("Change Speed to %sMhz %s duplex\n",		\
+	       mode & 1 ? "100" : "10",				\
+	       mode & 4 ? "full" : "half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ   0x4800
+#define CR9_SRCS        0x1
+#define CR9_SRCLK       0x2
+#define CR9_CRDOUT      0x8
+#define SROM_DATA_0     0x0
+#define SROM_DATA_1     0x4
+#define PHY_DATA_1      0x20000
+#define PHY_DATA_0      0x00000
+#define MDCLKH          0x10000
+
+#define PHY_POWER_DOWN	0x800
+
+#define SROM_V41_CODE   0x14
+
+#define SROM_CLK_WRITE(data, ioaddr)					\
+		outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);		\
+		udelay(5);						\
+		outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);	\
+		udelay(5);						\
+		outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);		\
+		udelay(5);
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+        __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+        char *tx_buf_ptr;               /* Data for us */
+        struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
+
+struct rx_desc {
+	__le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+	struct sk_buff *rx_skb_ptr;	/* Data for us */
+	struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
+
+struct uli526x_board_info {
+	u32 chip_id;			/* Chip vendor/Device ID */
+	struct net_device *next_dev;	/* next device */
+	struct pci_dev *pdev;		/* PCI device */
+	spinlock_t lock;
+
+	long ioaddr;			/* I/O base address */
+	u32 cr0_data;
+	u32 cr5_data;
+	u32 cr6_data;
+	u32 cr7_data;
+	u32 cr15_data;
+
+	/* pointer for memory physical address */
+	dma_addr_t buf_pool_dma_ptr;	/* Tx buffer pool memory */
+	dma_addr_t buf_pool_dma_start;	/* Tx buffer pool align dword */
+	dma_addr_t desc_pool_dma_ptr;	/* descriptor pool memory */
+	dma_addr_t first_tx_desc_dma;
+	dma_addr_t first_rx_desc_dma;
+
+	/* descriptor pointer */
+	unsigned char *buf_pool_ptr;	/* Tx buffer pool memory */
+	unsigned char *buf_pool_start;	/* Tx buffer pool align dword */
+	unsigned char *desc_pool_ptr;	/* descriptor pool memory */
+	struct tx_desc *first_tx_desc;
+	struct tx_desc *tx_insert_ptr;
+	struct tx_desc *tx_remove_ptr;
+	struct rx_desc *first_rx_desc;
+	struct rx_desc *rx_insert_ptr;
+	struct rx_desc *rx_ready_ptr;	/* packet come pointer */
+	unsigned long tx_packet_cnt;	/* transmitted packet count */
+	unsigned long rx_avail_cnt;	/* available rx descriptor count */
+	unsigned long interval_rx_cnt;	/* rx packet count a callback time */
+
+	u16 dbug_cnt;
+	u16 NIC_capability;		/* NIC media capability */
+	u16 PHY_reg4;			/* Saved Phyxcer register 4 value */
+
+	u8 media_mode;			/* user specify media mode */
+	u8 op_mode;			/* real work media mode */
+	u8 phy_addr;
+	u8 link_failed;			/* Ever link failed */
+	u8 wait_reset;			/* Hardware failed, need to reset */
+	struct timer_list timer;
+
+	/* Driver defined statistic counter */
+	unsigned long tx_fifo_underrun;
+	unsigned long tx_loss_carrier;
+	unsigned long tx_no_carrier;
+	unsigned long tx_late_collision;
+	unsigned long tx_excessive_collision;
+	unsigned long tx_jabber_timeout;
+	unsigned long reset_count;
+	unsigned long reset_cr8;
+	unsigned long reset_fatal;
+	unsigned long reset_TXtimeout;
+
+	/* NIC SROM data */
+	unsigned char srom[128];
+	u8 init;
+};
+
+enum uli526x_offsets {
+	DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+	DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+	DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+	DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+	CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+	CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+	CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration ----------------------------- */
+static int __devinitdata printed_version;
+static const char version[] __devinitconst =
+	"ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")";
+
+static int uli526x_debug;
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+static u32 uli526x_cr6_user_set;
+
+/* For module input parameter */
+static int debug;
+static u32 cr6set;
+static int mode = 8;
+
+/* function declaration ------------------------------------- */
+static int uli526x_open(struct net_device *);
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *,
+					    struct net_device *);
+static int uli526x_stop(struct net_device *);
+static void uli526x_set_filter_mode(struct net_device *);
+static const struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static irqreturn_t uli526x_interrupt(int, void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev);
+#endif
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static void send_filter_frame(struct net_device *, int);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static u8 uli526x_sense_speed(struct uli526x_board_info *);
+static void uli526x_process_mode(struct uli526x_board_info *);
+static void uli526x_timer(unsigned long);
+static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
+static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
+static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
+static void uli526x_dynamic_reset(struct net_device *);
+static void uli526x_free_rxbuffer(struct uli526x_board_info *);
+static void uli526x_init(struct net_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+/* ULI526X network board routine ---------------------------- */
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= uli526x_open,
+	.ndo_stop		= uli526x_stop,
+	.ndo_start_xmit		= uli526x_start_xmit,
+	.ndo_set_rx_mode	= uli526x_set_filter_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller 	= uli526x_poll,
+#endif
+};
+
+/*
+ *	Search ULI526X board, allocate space and register it
+ */
+
+static int __devinit uli526x_init_one (struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	struct uli526x_board_info *db;	/* board information structure */
+	struct net_device *dev;
+	int i, err;
+
+	ULI526X_DBUG(0, "uli526x_init_one()", 0);
+
+	if (!printed_version++)
+		pr_info("%s\n", version);
+
+	/* Init network device */
+	dev = alloc_etherdev(sizeof(*db));
+	if (dev == NULL)
+		return -ENOMEM;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		pr_warn("32-bit PCI DMA not available\n");
+		err = -ENODEV;
+		goto err_out_free;
+	}
+
+	/* Enable Master/IO access, Disable memory access */
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_out_free;
+
+	if (!pci_resource_start(pdev, 0)) {
+		pr_err("I/O base is zero\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
+		pr_err("Allocated I/O size too small\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (pci_request_regions(pdev, DRV_NAME)) {
+		pr_err("Failed to request PCI regions\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	/* Init system & device */
+	db = netdev_priv(dev);
+
+	/* Allocate Tx/Rx descriptor memory */
+	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+	if(db->desc_pool_ptr == NULL)
+	{
+		err = -ENOMEM;
+		goto err_out_nomem;
+	}
+	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+	if(db->buf_pool_ptr == NULL)
+	{
+		err = -ENOMEM;
+		goto err_out_nomem;
+	}
+
+	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+	db->buf_pool_start = db->buf_pool_ptr;
+	db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+	db->chip_id = ent->driver_data;
+	db->ioaddr = pci_resource_start(pdev, 0);
+
+	db->pdev = pdev;
+	db->init = 1;
+
+	dev->base_addr = db->ioaddr;
+	dev->irq = pdev->irq;
+	pci_set_drvdata(pdev, dev);
+
+	/* Register some necessary functions */
+	dev->netdev_ops = &netdev_ops;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+
+	spin_lock_init(&db->lock);
+
+
+	/* read 64 word srom data */
+	for (i = 0; i < 64; i++)
+		((__le16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+
+	/* Set Node address */
+	if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0)		/* SROM absent, so read MAC address from ID Table */
+	{
+		outl(0x10000, db->ioaddr + DCR0);	//Diagnosis mode
+		outl(0x1c0, db->ioaddr + DCR13);	//Reset dianostic pointer port
+		outl(0, db->ioaddr + DCR14);		//Clear reset port
+		outl(0x10, db->ioaddr + DCR14);		//Reset ID Table pointer
+		outl(0, db->ioaddr + DCR14);		//Clear reset port
+		outl(0, db->ioaddr + DCR13);		//Clear CR13
+		outl(0x1b0, db->ioaddr + DCR13);	//Select ID Table access port
+		//Read MAC address from CR14
+		for (i = 0; i < 6; i++)
+			dev->dev_addr[i] = inl(db->ioaddr + DCR14);
+		//Read end
+		outl(0, db->ioaddr + DCR13);	//Clear CR13
+		outl(0, db->ioaddr + DCR0);		//Clear CR0
+		udelay(10);
+	}
+	else		/*Exist SROM*/
+	{
+		for (i = 0; i < 6; i++)
+			dev->dev_addr[i] = db->srom[20 + i];
+	}
+	err = register_netdev (dev);
+	if (err)
+		goto err_out_res;
+
+	netdev_info(dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+		    ent->driver_data >> 16, pci_name(pdev),
+		    dev->dev_addr, dev->irq);
+
+	pci_set_master(pdev);
+
+	return 0;
+
+err_out_res:
+	pci_release_regions(pdev);
+err_out_nomem:
+	if(db->desc_pool_ptr)
+		pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+			db->desc_pool_ptr, db->desc_pool_dma_ptr);
+
+	if(db->buf_pool_ptr != NULL)
+		pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+			db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_free:
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+
+	return err;
+}
+
+
+static void __devexit uli526x_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	ULI526X_DBUG(0, "uli526x_remove_one()", 0);
+
+	pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+				DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ 				db->desc_pool_dma_ptr);
+	pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+				db->buf_pool_ptr, db->buf_pool_dma_ptr);
+	unregister_netdev(dev);
+	pci_release_regions(pdev);
+	free_netdev(dev);	/* free board information */
+	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
+	ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
+}
+
+
+/*
+ *	Open the interface.
+ *	The interface is opened whenever "ifconfig" activates it.
+ */
+
+static int uli526x_open(struct net_device *dev)
+{
+	int ret;
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	ULI526X_DBUG(0, "uli526x_open", 0);
+
+	/* system variable init */
+	db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
+	db->tx_packet_cnt = 0;
+	db->rx_avail_cnt = 0;
+	db->link_failed = 1;
+	netif_carrier_off(dev);
+	db->wait_reset = 0;
+
+	db->NIC_capability = 0xf;	/* All capability*/
+	db->PHY_reg4 = 0x1e0;
+
+	/* CR6 operation mode decision */
+	db->cr6_data |= ULI526X_TXTH_256;
+	db->cr0_data = CR0_DEFAULT;
+
+	/* Initialize ULI526X board */
+	uli526x_init(dev);
+
+	ret = request_irq(dev->irq, uli526x_interrupt, IRQF_SHARED, dev->name, dev);
+	if (ret)
+		return ret;
+
+	/* Active System Interface */
+	netif_wake_queue(dev);
+
+	/* set and active a timer process */
+	init_timer(&db->timer);
+	db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
+	db->timer.data = (unsigned long)dev;
+	db->timer.function = uli526x_timer;
+	add_timer(&db->timer);
+
+	return 0;
+}
+
+
+/*	Initialize ULI526X board
+ *	Reset ULI526X board
+ *	Initialize TX/Rx descriptor chain structure
+ *	Send the set-up frame
+ *	Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = db->ioaddr;
+	u8	phy_tmp;
+	u8	timeout;
+	u16	phy_value;
+	u16 phy_reg_reset;
+
+
+	ULI526X_DBUG(0, "uli526x_init()", 0);
+
+	/* Reset M526x MAC controller */
+	outl(ULI526X_RESET, ioaddr + DCR0);	/* RESET MAC */
+	udelay(100);
+	outl(db->cr0_data, ioaddr + DCR0);
+	udelay(5);
+
+	/* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+	db->phy_addr = 1;
+	for(phy_tmp=0;phy_tmp<32;phy_tmp++)
+	{
+		phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
+		if(phy_value != 0xffff&&phy_value!=0)
+		{
+			db->phy_addr = phy_tmp;
+			break;
+		}
+	}
+	if(phy_tmp == 32)
+		pr_warn("Can not find the phy address!!!\n");
+	/* Parser SROM and media mode */
+	db->media_mode = uli526x_media_mode;
+
+	/* phyxcer capability setting */
+	phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
+	phy_reg_reset = (phy_reg_reset | 0x8000);
+	phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+
+	/* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management
+	 * functions") or phy data sheet for details on phy reset
+	 */
+	udelay(500);
+	timeout = 10;
+	while (timeout-- &&
+		phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000)
+			udelay(100);
+
+	/* Process Phyxcer Media Mode */
+	uli526x_set_phyxcer(db);
+
+	/* Media Mode Process */
+	if ( !(db->media_mode & ULI526X_AUTO) )
+		db->op_mode = db->media_mode; 	/* Force Mode */
+
+	/* Initialize Transmit/Receive decriptor and CR3/4 */
+	uli526x_descriptor_init(db, ioaddr);
+
+	/* Init CR6 to program M526X operation */
+	update_cr6(db->cr6_data, ioaddr);
+
+	/* Send setup frame */
+	send_filter_frame(dev, netdev_mc_count(dev));	/* M5261/M5263 */
+
+	/* Init CR7, interrupt active bit */
+	db->cr7_data = CR7_DEFAULT;
+	outl(db->cr7_data, ioaddr + DCR7);
+
+	/* Init CR15, Tx jabber and Rx watchdog timer */
+	outl(db->cr15_data, ioaddr + DCR15);
+
+	/* Enable ULI526X Tx/Rx function */
+	db->cr6_data |= CR6_RXSC | CR6_TXSC;
+	update_cr6(db->cr6_data, ioaddr);
+}
+
+
+/*
+ *	Hardware start transmission.
+ *	Send a packet to media from the upper layer.
+ */
+
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
+					    struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	struct tx_desc *txptr;
+	unsigned long flags;
+
+	ULI526X_DBUG(0, "uli526x_start_xmit", 0);
+
+	/* Resource flag check */
+	netif_stop_queue(dev);
+
+	/* Too large packet check */
+	if (skb->len > MAX_PACKET_SIZE) {
+		netdev_err(dev, "big packet = %d\n", (u16)skb->len);
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* No Tx resource check, it never happen nromally */
+	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+		spin_unlock_irqrestore(&db->lock, flags);
+		netdev_err(dev, "No Tx resource %ld\n", db->tx_packet_cnt);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* Disable NIC interrupt */
+	outl(0, dev->base_addr + DCR7);
+
+	/* transmit this packet */
+	txptr = db->tx_insert_ptr;
+	skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len);
+	txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
+
+	/* Point to next transmit free descriptor */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+
+	/* Transmit Packet Process */
+	if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
+		txptr->tdes0 = cpu_to_le32(0x80000000);	/* Set owner bit */
+		db->tx_packet_cnt++;			/* Ready to send */
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+		dev->trans_start = jiffies;		/* saved time stamp */
+	}
+
+	/* Tx resource check */
+	if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
+		netif_wake_queue(dev);
+
+	/* Restore CR7 to enable interrupt */
+	spin_unlock_irqrestore(&db->lock, flags);
+	outl(db->cr7_data, dev->base_addr + DCR7);
+
+	/* free this SKB */
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ *	Stop the interface.
+ *	The interface is stopped when it is brought.
+ */
+
+static int uli526x_stop(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+
+	ULI526X_DBUG(0, "uli526x_stop", 0);
+
+	/* disable system */
+	netif_stop_queue(dev);
+
+	/* deleted timer */
+	del_timer_sync(&db->timer);
+
+	/* Reset & stop ULI526X board */
+	outl(ULI526X_RESET, ioaddr + DCR0);
+	udelay(5);
+	phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+	/* free interrupt */
+	free_irq(dev->irq, dev);
+
+	/* free allocated rx buffer */
+	uli526x_free_rxbuffer(db);
+
+	return 0;
+}
+
+
+/*
+ *	M5261/M5263 insterrupt handler
+ *	receive the packet to upper layer, free the transmitted packet
+ */
+
+static irqreturn_t uli526x_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&db->lock, flags);
+	outl(0, ioaddr + DCR7);
+
+	/* Got ULI526X status */
+	db->cr5_data = inl(ioaddr + DCR5);
+	outl(db->cr5_data, ioaddr + DCR5);
+	if ( !(db->cr5_data & 0x180c1) ) {
+		/* Restore CR7 to enable interrupt mask */
+		outl(db->cr7_data, ioaddr + DCR7);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	/* Check system status */
+	if (db->cr5_data & 0x2000) {
+		/* system bus error happen */
+		ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
+		db->reset_fatal++;
+		db->wait_reset = 1;	/* Need to RESET */
+		spin_unlock_irqrestore(&db->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	 /* Received the coming packet */
+	if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+		uli526x_rx_packet(dev, db);
+
+	/* reallocate rx descriptor buffer */
+	if (db->rx_avail_cnt<RX_DESC_CNT)
+		allocate_rx_buffer(db);
+
+	/* Free the transmitted descriptor */
+	if ( db->cr5_data & 0x01)
+		uli526x_free_tx_pkt(dev, db);
+
+	/* Restore CR7 to enable interrupt mask */
+	outl(db->cr7_data, ioaddr + DCR7);
+
+	spin_unlock_irqrestore(&db->lock, flags);
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev)
+{
+	/* ISR grabs the irqsave lock, so this should be safe */
+	uli526x_interrupt(dev->irq, dev);
+}
+#endif
+
+/*
+ *	Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct net_device *dev,
+				struct uli526x_board_info * db)
+{
+	struct tx_desc *txptr;
+	u32 tdes0;
+
+	txptr = db->tx_remove_ptr;
+	while(db->tx_packet_cnt) {
+		tdes0 = le32_to_cpu(txptr->tdes0);
+		if (tdes0 & 0x80000000)
+			break;
+
+		/* A packet sent completed */
+		db->tx_packet_cnt--;
+		dev->stats.tx_packets++;
+
+		/* Transmit statistic counter */
+		if ( tdes0 != 0x7fffffff ) {
+			dev->stats.collisions += (tdes0 >> 3) & 0xf;
+			dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+			if (tdes0 & TDES0_ERR_MASK) {
+				dev->stats.tx_errors++;
+				if (tdes0 & 0x0002) {	/* UnderRun */
+					db->tx_fifo_underrun++;
+					if ( !(db->cr6_data & CR6_SFT) ) {
+						db->cr6_data = db->cr6_data | CR6_SFT;
+						update_cr6(db->cr6_data, db->ioaddr);
+					}
+				}
+				if (tdes0 & 0x0100)
+					db->tx_excessive_collision++;
+				if (tdes0 & 0x0200)
+					db->tx_late_collision++;
+				if (tdes0 & 0x0400)
+					db->tx_no_carrier++;
+				if (tdes0 & 0x0800)
+					db->tx_loss_carrier++;
+				if (tdes0 & 0x4000)
+					db->tx_jabber_timeout++;
+			}
+		}
+
+    		txptr = txptr->next_tx_desc;
+	}/* End of while */
+
+	/* Update TX remove pointer to next */
+	db->tx_remove_ptr = txptr;
+
+	/* Resource available check */
+	if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
+		netif_wake_queue(dev);	/* Active upper layer, send again */
+}
+
+
+/*
+ *	Receive the come packet and pass to upper layer
+ */
+
+static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
+{
+	struct rx_desc *rxptr;
+	struct sk_buff *skb;
+	int rxlen;
+	u32 rdes0;
+
+	rxptr = db->rx_ready_ptr;
+
+	while(db->rx_avail_cnt) {
+		rdes0 = le32_to_cpu(rxptr->rdes0);
+		if (rdes0 & 0x80000000)	/* packet owner check */
+		{
+			break;
+		}
+
+		db->rx_avail_cnt--;
+		db->interval_rx_cnt++;
+
+		pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+		if ( (rdes0 & 0x300) != 0x300) {
+			/* A packet without First/Last flag */
+			/* reuse this SKB */
+			ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+			uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+		} else {
+			/* A packet with First/Last flag */
+			rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
+
+			/* error summary bit check */
+			if (rdes0 & 0x8000) {
+				/* This is a error packet */
+				dev->stats.rx_errors++;
+				if (rdes0 & 1)
+					dev->stats.rx_fifo_errors++;
+				if (rdes0 & 2)
+					dev->stats.rx_crc_errors++;
+				if (rdes0 & 0x80)
+					dev->stats.rx_length_errors++;
+			}
+
+			if ( !(rdes0 & 0x8000) ||
+				((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+				struct sk_buff *new_skb = NULL;
+
+				skb = rxptr->rx_skb_ptr;
+
+				/* Good packet, send to upper layer */
+				/* Shorst packet used new SKB */
+				if ((rxlen < RX_COPY_SIZE) &&
+				    (((new_skb = dev_alloc_skb(rxlen + 2)) != NULL))) {
+					skb = new_skb;
+					/* size less than COPY_SIZE, allocate a rxlen SKB */
+					skb_reserve(skb, 2); /* 16byte align */
+					memcpy(skb_put(skb, rxlen),
+					       skb_tail_pointer(rxptr->rx_skb_ptr),
+					       rxlen);
+					uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+				} else
+					skb_put(skb, rxlen);
+
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += rxlen;
+
+			} else {
+				/* Reuse SKB buffer when the packet is error */
+				ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+				uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+			}
+		}
+
+		rxptr = rxptr->next_rx_desc;
+	}
+
+	db->rx_ready_ptr = rxptr;
+}
+
+
+/*
+ * Set ULI526X multicast address
+ */
+
+static void uli526x_set_filter_mode(struct net_device * dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long flags;
+
+	ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
+	spin_lock_irqsave(&db->lock, flags);
+
+	if (dev->flags & IFF_PROMISC) {
+		ULI526X_DBUG(0, "Enable PROM Mode", 0);
+		db->cr6_data |= CR6_PM | CR6_PBF;
+		update_cr6(db->cr6_data, db->ioaddr);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	if (dev->flags & IFF_ALLMULTI ||
+	    netdev_mc_count(dev) > ULI5261_MAX_MULTICAST) {
+		ULI526X_DBUG(0, "Pass all multicast address",
+			     netdev_mc_count(dev));
+		db->cr6_data &= ~(CR6_PM | CR6_PBF);
+		db->cr6_data |= CR6_PAM;
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));
+	send_filter_frame(dev, netdev_mc_count(dev)); 	/* M5261/M5263 */
+	spin_unlock_irqrestore(&db->lock, flags);
+}
+
+static void
+ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
+{
+	ecmd->supported = (SUPPORTED_10baseT_Half |
+	                   SUPPORTED_10baseT_Full |
+	                   SUPPORTED_100baseT_Half |
+	                   SUPPORTED_100baseT_Full |
+	                   SUPPORTED_Autoneg |
+	                   SUPPORTED_MII);
+
+	ecmd->advertising = (ADVERTISED_10baseT_Half |
+	                   ADVERTISED_10baseT_Full |
+	                   ADVERTISED_100baseT_Half |
+	                   ADVERTISED_100baseT_Full |
+	                   ADVERTISED_Autoneg |
+	                   ADVERTISED_MII);
+
+
+	ecmd->port = PORT_MII;
+	ecmd->phy_address = db->phy_addr;
+
+	ecmd->transceiver = XCVR_EXTERNAL;
+
+	ethtool_cmd_speed_set(ecmd, SPEED_10);
+	ecmd->duplex = DUPLEX_HALF;
+
+	if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+	{
+		ethtool_cmd_speed_set(ecmd, SPEED_100);
+	}
+	if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+	{
+		ecmd->duplex = DUPLEX_FULL;
+	}
+	if(db->link_failed)
+	{
+		ethtool_cmd_speed_set(ecmd, -1);
+		ecmd->duplex = -1;
+	}
+
+	if (db->media_mode & ULI526X_AUTO)
+	{
+		ecmd->autoneg = AUTONEG_ENABLE;
+	}
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct uli526x_board_info *np = netdev_priv(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	if (np->pdev)
+		strcpy(info->bus_info, pci_name(np->pdev));
+	else
+		sprintf(info->bus_info, "EISA 0x%lx %d",
+			dev->base_addr, dev->irq);
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
+	struct uli526x_board_info *np = netdev_priv(dev);
+
+	ULi_ethtool_gset(np, cmd);
+
+	return 0;
+}
+
+static u32 netdev_get_link(struct net_device *dev) {
+	struct uli526x_board_info *np = netdev_priv(dev);
+
+	if(np->link_failed)
+		return 0;
+	else
+		return 1;
+}
+
+static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	wol->supported = WAKE_PHY | WAKE_MAGIC;
+	wol->wolopts = 0;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.get_link		= netdev_get_link,
+	.get_wol		= uli526x_get_wol,
+};
+
+/*
+ *	A periodic timer routine
+ *	Dynamic media sense, allocate Rx buffer...
+ */
+
+static void uli526x_timer(unsigned long data)
+{
+	u32 tmp_cr8;
+	unsigned char tmp_cr12=0;
+	struct net_device *dev = (struct net_device *) data;
+	struct uli526x_board_info *db = netdev_priv(dev);
+ 	unsigned long flags;
+
+	//ULI526X_DBUG(0, "uli526x_timer()", 0);
+	spin_lock_irqsave(&db->lock, flags);
+
+
+	/* Dynamic reset ULI526X : system error or transmit time-out */
+	tmp_cr8 = inl(db->ioaddr + DCR8);
+	if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+		db->reset_cr8++;
+		db->wait_reset = 1;
+	}
+	db->interval_rx_cnt = 0;
+
+	/* TX polling kick monitor */
+	if ( db->tx_packet_cnt &&
+	     time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_KICK) ) {
+		outl(0x1, dev->base_addr + DCR1);   // Tx polling again
+
+		// TX Timeout
+		if ( time_after(jiffies, dev_trans_start(dev) + ULI526X_TX_TIMEOUT) ) {
+			db->reset_TXtimeout++;
+			db->wait_reset = 1;
+			netdev_err(dev, " Tx timeout - resetting\n");
+		}
+	}
+
+	if (db->wait_reset) {
+		ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
+		db->reset_count++;
+		uli526x_dynamic_reset(dev);
+		db->timer.expires = ULI526X_TIMER_WUT;
+		add_timer(&db->timer);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	/* Link status check, Dynamic media type change */
+	if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
+		tmp_cr12 = 3;
+
+	if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+		/* Link Failed */
+		ULI526X_DBUG(0, "Link Failed", tmp_cr12);
+		netif_carrier_off(dev);
+		netdev_info(dev, "NIC Link is Down\n");
+		db->link_failed = 1;
+
+		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
+		/* AUTO don't need */
+		if ( !(db->media_mode & 0x8) )
+			phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+
+		/* AUTO mode, if INT phyxcer link failed, select EXT device */
+		if (db->media_mode & ULI526X_AUTO) {
+			db->cr6_data&=~0x00000200;	/* bit9=0, HD mode */
+			update_cr6(db->cr6_data, db->ioaddr);
+		}
+	} else
+		if ((tmp_cr12 & 0x3) && db->link_failed) {
+			ULI526X_DBUG(0, "Link link OK", tmp_cr12);
+			db->link_failed = 0;
+
+			/* Auto Sense Speed */
+			if ( (db->media_mode & ULI526X_AUTO) &&
+				uli526x_sense_speed(db) )
+				db->link_failed = 1;
+			uli526x_process_mode(db);
+
+			if(db->link_failed==0)
+			{
+				netdev_info(dev, "NIC Link is Up %d Mbps %s duplex\n",
+					    (db->op_mode == ULI526X_100MHF ||
+					     db->op_mode == ULI526X_100MFD)
+					    ? 100 : 10,
+					    (db->op_mode == ULI526X_10MFD ||
+					     db->op_mode == ULI526X_100MFD)
+					    ? "Full" : "Half");
+				netif_carrier_on(dev);
+			}
+			/* SHOW_MEDIA_TYPE(db->op_mode); */
+		}
+		else if(!(tmp_cr12 & 0x3) && db->link_failed)
+		{
+			if(db->init==1)
+			{
+				netdev_info(dev, "NIC Link is Down\n");
+				netif_carrier_off(dev);
+			}
+		}
+		db->init=0;
+
+	/* Timer active again */
+	db->timer.expires = ULI526X_TIMER_WUT;
+	add_timer(&db->timer);
+	spin_unlock_irqrestore(&db->lock, flags);
+}
+
+
+/*
+ *	Stop ULI526X board
+ *	Free Tx/Rx allocated memory
+ *	Init system variable
+ */
+
+static void uli526x_reset_prepare(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	/* Sopt MAC controller */
+	db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
+	update_cr6(db->cr6_data, dev->base_addr);
+	outl(0, dev->base_addr + DCR7);		/* Disable Interrupt */
+	outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+	/* Disable upper layer interface */
+	netif_stop_queue(dev);
+
+	/* Free Rx Allocate buffer */
+	uli526x_free_rxbuffer(db);
+
+	/* system variable init */
+	db->tx_packet_cnt = 0;
+	db->rx_avail_cnt = 0;
+	db->link_failed = 1;
+	db->init=1;
+	db->wait_reset = 0;
+}
+
+
+/*
+ *	Dynamic reset the ULI526X board
+ *	Stop ULI526X board
+ *	Free Tx/Rx allocated memory
+ *	Reset ULI526X board
+ *	Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+	ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+	uli526x_reset_prepare(dev);
+
+	/* Re-initialize ULI526X board */
+	uli526x_init(dev);
+
+	/* Restart upper layer interface */
+	netif_wake_queue(dev);
+}
+
+
+#ifdef CONFIG_PM
+
+/*
+ *	Suspend the interface.
+ */
+
+static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	pci_power_t power_state;
+	int err;
+
+	ULI526X_DBUG(0, "uli526x_suspend", 0);
+
+	if (!netdev_priv(dev))
+		return 0;
+
+	pci_save_state(pdev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	netif_device_detach(dev);
+	uli526x_reset_prepare(dev);
+
+	power_state = pci_choose_state(pdev, state);
+	pci_enable_wake(pdev, power_state, 0);
+	err = pci_set_power_state(pdev, power_state);
+	if (err) {
+		netif_device_attach(dev);
+		/* Re-initialize ULI526X board */
+		uli526x_init(dev);
+		/* Restart upper layer interface */
+		netif_wake_queue(dev);
+	}
+
+	return err;
+}
+
+/*
+ *	Resume the interface.
+ */
+
+static int uli526x_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	int err;
+
+	ULI526X_DBUG(0, "uli526x_resume", 0);
+
+	if (!netdev_priv(dev))
+		return 0;
+
+	pci_restore_state(pdev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	err = pci_set_power_state(pdev, PCI_D0);
+	if (err) {
+		netdev_warn(dev, "Could not put device into D0\n");
+		return err;
+	}
+
+	netif_device_attach(dev);
+	/* Re-initialize ULI526X board */
+	uli526x_init(dev);
+	/* Restart upper layer interface */
+	netif_wake_queue(dev);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+
+#define uli526x_suspend	NULL
+#define uli526x_resume	NULL
+
+#endif /* !CONFIG_PM */
+
+
+/*
+ *	free all allocated rx buffer
+ */
+
+static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
+{
+	ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
+
+	/* free allocated rx buffer */
+	while (db->rx_avail_cnt) {
+		dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+		db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+		db->rx_avail_cnt--;
+	}
+}
+
+
+/*
+ *	Reuse the SK buffer
+ */
+
+static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
+{
+	struct rx_desc *rxptr = db->rx_insert_ptr;
+
+	if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+		rxptr->rx_skb_ptr = skb;
+		rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev,
+							  skb_tail_pointer(skb),
+							  RX_ALLOC_SIZE,
+							  PCI_DMA_FROMDEVICE));
+		wmb();
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+		db->rx_avail_cnt++;
+		db->rx_insert_ptr = rxptr->next_rx_desc;
+	} else
+		ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
+}
+
+
+/*
+ *	Initialize transmit/Receive descriptor
+ *	Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
+{
+	struct tx_desc *tmp_tx;
+	struct rx_desc *tmp_rx;
+	unsigned char *tmp_buf;
+	dma_addr_t tmp_tx_dma, tmp_rx_dma;
+	dma_addr_t tmp_buf_dma;
+	int i;
+
+	ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
+
+	/* tx descriptor start pointer */
+	db->tx_insert_ptr = db->first_tx_desc;
+	db->tx_remove_ptr = db->first_tx_desc;
+	outl(db->first_tx_desc_dma, ioaddr + DCR4);     /* TX DESC address */
+
+	/* rx descriptor start pointer */
+	db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->first_rx_desc_dma =  db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->rx_insert_ptr = db->first_rx_desc;
+	db->rx_ready_ptr = db->first_rx_desc;
+	outl(db->first_rx_desc_dma, ioaddr + DCR3);	/* RX DESC address */
+
+	/* Init Transmit chain */
+	tmp_buf = db->buf_pool_start;
+	tmp_buf_dma = db->buf_pool_dma_start;
+	tmp_tx_dma = db->first_tx_desc_dma;
+	for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+		tmp_tx->tx_buf_ptr = tmp_buf;
+		tmp_tx->tdes0 = cpu_to_le32(0);
+		tmp_tx->tdes1 = cpu_to_le32(0x81000000);	/* IC, chain */
+		tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+		tmp_tx_dma += sizeof(struct tx_desc);
+		tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+		tmp_tx->next_tx_desc = tmp_tx + 1;
+		tmp_buf = tmp_buf + TX_BUF_ALLOC;
+		tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+	}
+	(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+	tmp_tx->next_tx_desc = db->first_tx_desc;
+
+	 /* Init Receive descriptor chain */
+	tmp_rx_dma=db->first_rx_desc_dma;
+	for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+		tmp_rx->rdes0 = cpu_to_le32(0);
+		tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+		tmp_rx_dma += sizeof(struct rx_desc);
+		tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+		tmp_rx->next_rx_desc = tmp_rx + 1;
+	}
+	(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+	tmp_rx->next_rx_desc = db->first_rx_desc;
+
+	/* pre-allocate Rx buffer */
+	allocate_rx_buffer(db);
+}
+
+
+/*
+ *	Update CR6 value
+ *	Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+	outl(cr6_data, ioaddr + DCR6);
+	udelay(5);
+}
+
+
+/*
+ *	Send a setup frame for M5261/M5263
+ *	This setup frame initialize ULI526X address filter mode
+ */
+
+#ifdef __BIG_ENDIAN
+#define FLT_SHIFT 16
+#else
+#define FLT_SHIFT 0
+#endif
+
+static void send_filter_frame(struct net_device *dev, int mc_cnt)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	struct netdev_hw_addr *ha;
+	struct tx_desc *txptr;
+	u16 * addrptr;
+	u32 * suptr;
+	int i;
+
+	ULI526X_DBUG(0, "send_filter_frame()", 0);
+
+	txptr = db->tx_insert_ptr;
+	suptr = (u32 *) txptr->tx_buf_ptr;
+
+	/* Node address */
+	addrptr = (u16 *) dev->dev_addr;
+	*suptr++ = addrptr[0] << FLT_SHIFT;
+	*suptr++ = addrptr[1] << FLT_SHIFT;
+	*suptr++ = addrptr[2] << FLT_SHIFT;
+
+	/* broadcast address */
+	*suptr++ = 0xffff << FLT_SHIFT;
+	*suptr++ = 0xffff << FLT_SHIFT;
+	*suptr++ = 0xffff << FLT_SHIFT;
+
+	/* fit the multicast address */
+	netdev_for_each_mc_addr(ha, dev) {
+		addrptr = (u16 *) ha->addr;
+		*suptr++ = addrptr[0] << FLT_SHIFT;
+		*suptr++ = addrptr[1] << FLT_SHIFT;
+		*suptr++ = addrptr[2] << FLT_SHIFT;
+	}
+
+	for (i = netdev_mc_count(dev); i < 14; i++) {
+		*suptr++ = 0xffff << FLT_SHIFT;
+		*suptr++ = 0xffff << FLT_SHIFT;
+		*suptr++ = 0xffff << FLT_SHIFT;
+	}
+
+	/* prepare the setup frame */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+	txptr->tdes1 = cpu_to_le32(0x890000c0);
+
+	/* Resource Check and Send the setup packet */
+	if (db->tx_packet_cnt < TX_DESC_CNT) {
+		/* Resource Empty */
+		db->tx_packet_cnt++;
+		txptr->tdes0 = cpu_to_le32(0x80000000);
+		update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+		update_cr6(db->cr6_data, dev->base_addr);
+		dev->trans_start = jiffies;
+	} else
+		netdev_err(dev, "No Tx resource - Send_filter_frame!\n");
+}
+
+
+/*
+ *	Allocate rx buffer,
+ *	As possible as allocate maxiumn Rx buffer
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+	struct rx_desc *rxptr;
+	struct sk_buff *skb;
+
+	rxptr = db->rx_insert_ptr;
+
+	while(db->rx_avail_cnt < RX_DESC_CNT) {
+		if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+			break;
+		rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+		rxptr->rdes2 = cpu_to_le32(pci_map_single(db->pdev,
+							  skb_tail_pointer(skb),
+							  RX_ALLOC_SIZE,
+							  PCI_DMA_FROMDEVICE));
+		wmb();
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+		rxptr = rxptr->next_rx_desc;
+		db->rx_avail_cnt++;
+	}
+
+	db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ *	Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+	int i;
+	u16 srom_data = 0;
+	long cr9_ioaddr = ioaddr + DCR9;
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	/* Send the Read Command 110b */
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+	/* Send the offset */
+	for (i = 5; i >= 0; i--) {
+		srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+		SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+	}
+
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	for (i = 16; i > 0; i--) {
+		outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+		udelay(5);
+		srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+		outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+		udelay(5);
+	}
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	return srom_data;
+}
+
+
+/*
+ *	Auto sense the media mode
+ */
+
+static u8 uli526x_sense_speed(struct uli526x_board_info * db)
+{
+	u8 ErrFlag = 0;
+	u16 phy_mode;
+
+	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+
+	if ( (phy_mode & 0x24) == 0x24 ) {
+
+		phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
+		if(phy_mode&0x8000)
+			phy_mode = 0x8000;
+		else if(phy_mode&0x4000)
+			phy_mode = 0x4000;
+		else if(phy_mode&0x2000)
+			phy_mode = 0x2000;
+		else
+			phy_mode = 0x1000;
+
+		switch (phy_mode) {
+		case 0x1000: db->op_mode = ULI526X_10MHF; break;
+		case 0x2000: db->op_mode = ULI526X_10MFD; break;
+		case 0x4000: db->op_mode = ULI526X_100MHF; break;
+		case 0x8000: db->op_mode = ULI526X_100MFD; break;
+		default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
+		}
+	} else {
+		db->op_mode = ULI526X_10MHF;
+		ULI526X_DBUG(0, "Link Failed :", phy_mode);
+		ErrFlag = 1;
+	}
+
+	return ErrFlag;
+}
+
+
+/*
+ *	Set 10/100 phyxcer capability
+ *	AUTO mode : phyxcer register4 is NIC capability
+ *	Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+	u16 phy_reg;
+
+	/* Phyxcer capability setting */
+	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+	if (db->media_mode & ULI526X_AUTO) {
+		/* AUTO Mode */
+		phy_reg |= db->PHY_reg4;
+	} else {
+		/* Force Mode */
+		switch(db->media_mode) {
+		case ULI526X_10MHF: phy_reg |= 0x20; break;
+		case ULI526X_10MFD: phy_reg |= 0x40; break;
+		case ULI526X_100MHF: phy_reg |= 0x80; break;
+		case ULI526X_100MFD: phy_reg |= 0x100; break;
+		}
+
+	}
+
+  	/* Write new capability to Phyxcer Reg4 */
+	if ( !(phy_reg & 0x01e0)) {
+		phy_reg|=db->PHY_reg4;
+		db->media_mode|=ULI526X_AUTO;
+	}
+	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ 	/* Restart Auto-Negotiation */
+	phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+	udelay(50);
+}
+
+
+/*
+ *	Process op-mode
+ 	AUTO mode : PHY controller in Auto-negotiation Mode
+ *	Force mode: PHY controller in force mode with HUB
+ *			N-way force capability with SWITCH
+ */
+
+static void uli526x_process_mode(struct uli526x_board_info *db)
+{
+	u16 phy_reg;
+
+	/* Full Duplex Mode Check */
+	if (db->op_mode & 0x4)
+		db->cr6_data |= CR6_FDM;	/* Set Full Duplex Bit */
+	else
+		db->cr6_data &= ~CR6_FDM;	/* Clear Full Duplex Bit */
+
+	update_cr6(db->cr6_data, db->ioaddr);
+
+	/* 10/100M phyxcer force mode need */
+	if ( !(db->media_mode & 0x8)) {
+		/* Forece Mode */
+		phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+		if ( !(phy_reg & 0x1) ) {
+			/* parter without N-Way capability */
+			phy_reg = 0x0;
+			switch(db->op_mode) {
+			case ULI526X_10MHF: phy_reg = 0x0; break;
+			case ULI526X_10MFD: phy_reg = 0x100; break;
+			case ULI526X_100MHF: phy_reg = 0x2000; break;
+			case ULI526X_100MFD: phy_reg = 0x2100; break;
+			}
+			phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+		}
+	}
+}
+
+
+/*
+ *	Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+{
+	u16 i;
+	unsigned long ioaddr;
+
+	if(chip_id == PCI_ULI5263_ID)
+	{
+		phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+		return;
+	}
+	/* M5261/M5263 Chip */
+	ioaddr = iobase + DCR9;
+
+	/* Send 33 synchronization clock to Phy controller */
+	for (i = 0; i < 35; i++)
+		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send start command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send write command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send Phy address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Send register address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* written trasnition */
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+	/* Write a word data to PHY controller */
+	for ( i = 0x8000; i > 0; i >>= 1)
+		phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+}
+
+
+/*
+ *	Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+	int i;
+	u16 phy_data;
+	unsigned long ioaddr;
+
+	if(chip_id == PCI_ULI5263_ID)
+		return phy_readby_cr10(iobase, phy_addr, offset);
+	/* M5261/M5263 Chip */
+	ioaddr = iobase + DCR9;
+
+	/* Send 33 synchronization clock to Phy controller */
+	for (i = 0; i < 35; i++)
+		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send start command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send read command(10) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+	/* Send Phy address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Send register address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Skip transition state */
+	phy_read_1bit(ioaddr, chip_id);
+
+	/* read 16bit data */
+	for (phy_data = 0, i = 0; i < 16; i++) {
+		phy_data <<= 1;
+		phy_data |= phy_read_1bit(ioaddr, chip_id);
+	}
+
+	return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+	unsigned long ioaddr,cr10_value;
+
+	ioaddr = iobase + DCR10;
+	cr10_value = phy_addr;
+	cr10_value = (cr10_value<<5) + offset;
+	cr10_value = (cr10_value<<16) + 0x08000000;
+	outl(cr10_value,ioaddr);
+	udelay(1);
+	while(1)
+	{
+		cr10_value = inl(ioaddr);
+		if(cr10_value&0x10000000)
+			break;
+	}
+	return cr10_value & 0x0ffff;
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
+{
+	unsigned long ioaddr,cr10_value;
+
+	ioaddr = iobase + DCR10;
+	cr10_value = phy_addr;
+	cr10_value = (cr10_value<<5) + offset;
+	cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+	outl(cr10_value,ioaddr);
+	udelay(1);
+}
+/*
+ *	Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+	outl(phy_data , ioaddr);			/* MII Clock Low */
+	udelay(1);
+	outl(phy_data  | MDCLKH, ioaddr);	/* MII Clock High */
+	udelay(1);
+	outl(phy_data , ioaddr);			/* MII Clock Low */
+	udelay(1);
+}
+
+
+/*
+ *	Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+	u16 phy_data;
+
+	outl(0x50000 , ioaddr);
+	udelay(1);
+	phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+	outl(0x40000 , ioaddr);
+	udelay(1);
+
+	return phy_data;
+}
+
+
+static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = {
+	{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
+	{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
+
+
+static struct pci_driver uli526x_driver = {
+	.name		= "uli526x",
+	.id_table	= uli526x_pci_tbl,
+	.probe		= uli526x_init_one,
+	.remove		= __devexit_p(uli526x_remove_one),
+	.suspend	= uli526x_suspend,
+	.resume		= uli526x_resume,
+};
+
+MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
+MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(debug, int, 0644);
+module_param(mode, int, 0);
+module_param(cr6set, int, 0);
+MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+/*	Description:
+ *	when user used insmod to add module, system invoked init_module()
+ *	to register the services.
+ */
+
+static int __init uli526x_init_module(void)
+{
+
+	pr_info("%s\n", version);
+	printed_version = 1;
+
+	ULI526X_DBUG(0, "init_module() ", debug);
+
+	if (debug)
+		uli526x_debug = debug;	/* set debug flag */
+	if (cr6set)
+		uli526x_cr6_user_set = cr6set;
+
+ 	switch (mode) {
+   	case ULI526X_10MHF:
+	case ULI526X_100MHF:
+	case ULI526X_10MFD:
+	case ULI526X_100MFD:
+		uli526x_media_mode = mode;
+		break;
+	default:
+		uli526x_media_mode = ULI526X_AUTO;
+		break;
+	}
+
+	return pci_register_driver(&uli526x_driver);
+}
+
+
+/*
+ *	Description:
+ *	when user used rmmod to delete module, system invoked clean_module()
+ *	to un-register all registered services.
+ */
+
+static void __exit uli526x_cleanup_module(void)
+{
+	ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
+	pci_unregister_driver(&uli526x_driver);
+}
+
+module_init(uli526x_init_module);
+module_exit(uli526x_cleanup_module);
diff --git a/drivers/net/ethernet/dec/tulip/winbond-840.c b/drivers/net/ethernet/dec/tulip/winbond-840.c
new file mode 100644
index 000000000000..4d01219ba22f
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/winbond-840.c
@@ -0,0 +1,1670 @@
+/* winbond-840.c: A Linux PCI network adapter device driver. */
+/*
+	Written 1998-2001 by Donald Becker.
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	Support and updates available at
+	http://www.scyld.com/network/drivers.html
+
+	Do not remove the copyright information.
+	Do not change the version information unless an improvement has been made.
+	Merely removing my name, as Compex has done in the past, does not count
+	as an improvement.
+
+	Changelog:
+	* ported to 2.4
+		???
+	* spin lock update, memory barriers, new style dma mappings
+		limit each tx buffer to < 1024 bytes
+		remove DescIntr from Rx descriptors (that's an Tx flag)
+		remove next pointer from Tx descriptors
+		synchronize tx_q_bytes
+		software reset in tx_timeout
+			Copyright (C) 2000 Manfred Spraul
+	* further cleanups
+		power management.
+		support for big endian descriptors
+			Copyright (C) 2001 Manfred Spraul
+  	* ethtool support (jgarzik)
+	* Replace some MII-related magic numbers with constants (jgarzik)
+
+	TODO:
+	* enable pci_power_off
+	* Wake-On-LAN
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"winbond-840"
+#define DRV_VERSION	"1.01-e"
+#define DRV_RELDATE	"Sep-11-2006"
+
+
+/* Automatically extracted configuration info:
+probe-func: winbond840_probe
+config-in: tristate 'Winbond W89c840 Ethernet support' CONFIG_WINBOND_840
+
+c-help-name: Winbond W89c840 PCI Ethernet support
+c-help-symbol: CONFIG_WINBOND_840
+c-help: This driver is for the Winbond W89c840 chip.  It also works with
+c-help: the TX9882 chip on the Compex RL100-ATX board.
+c-help: More specific information and updates are available from
+c-help: http://www.scyld.com/network/drivers.html
+*/
+
+/* The user-configurable values.
+   These may be modified when a driver module is loaded.*/
+
+static int debug = 1;			/* 1 normal messages, 0 quiet .. 7 verbose. */
+static int max_interrupt_work = 20;
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+   The '840 uses a 64 element hash table based on the Ethernet CRC.  */
+static int multicast_filter_limit = 32;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak;
+
+/* Used to pass the media type, etc.
+   Both 'options[]' and 'full_duplex[]' should exist for driver
+   interoperability.
+   The media type is usually passed in 'options[]'.
+*/
+#define MAX_UNITS 8		/* More are supported, limit only on options */
+static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_QUEUE_LEN	10		/* Limit ring entries actually used.  */
+#define TX_QUEUE_LEN_RESTART	5
+
+#define TX_BUFLIMIT	(1024-128)
+
+/* The presumed FIFO size for working around the Tx-FIFO-overflow bug.
+   To avoid overflowing we don't queue again until we have room for a
+   full-size packet.
+ */
+#define TX_FIFO_SIZE (2048)
+#define TX_BUG_FIFO_LIMIT (TX_FIFO_SIZE-1514-16)
+
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (2*HZ)
+
+/* Include files, designed to support most kernel versions 2.0.0 and later. */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/rtnetlink.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>		/* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "tulip.h"
+
+#undef PKT_BUF_SZ			/* tulip.h also defines this */
+#define PKT_BUF_SZ		1536	/* Size of each temporary Rx buffer.*/
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] __initconst =
+	"v" DRV_VERSION " (2.4 port) "
+	DRV_RELDATE "  Donald Becker <becker@scyld.com>\n"
+	"  http://www.scyld.com/network/drivers.html\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("Winbond W89c840 Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(max_interrupt_work, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(multicast_filter_limit, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+MODULE_PARM_DESC(max_interrupt_work, "winbond-840 maximum events handled per interrupt");
+MODULE_PARM_DESC(debug, "winbond-840 debug level (0-6)");
+MODULE_PARM_DESC(rx_copybreak, "winbond-840 copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(multicast_filter_limit, "winbond-840 maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(options, "winbond-840: Bits 0-3: media type, bit 17: full duplex");
+MODULE_PARM_DESC(full_duplex, "winbond-840 full duplex setting(s) (1)");
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This driver is for the Winbond w89c840 chip.
+
+II. Board-specific settings
+
+None.
+
+III. Driver operation
+
+This chip is very similar to the Digital 21*4* "Tulip" family.  The first
+twelve registers and the descriptor format are nearly identical.  Read a
+Tulip manual for operational details.
+
+A significant difference is that the multicast filter and station address are
+stored in registers rather than loaded through a pseudo-transmit packet.
+
+Unlike the Tulip, transmit buffers are limited to 1KB.  To transmit a
+full-sized packet we must use both data buffers in a descriptor.  Thus the
+driver uses ring mode where descriptors are implicitly sequential in memory,
+rather than using the second descriptor address as a chain pointer to
+subsequent descriptors.
+
+IV. Notes
+
+If you are going to almost clone a Tulip, why not go all the way and avoid
+the need for a new driver?
+
+IVb. References
+
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+http://www.winbond.com.tw/
+
+IVc. Errata
+
+A horrible bug exists in the transmit FIFO.  Apparently the chip doesn't
+correctly detect a full FIFO, and queuing more than 2048 bytes may result in
+silent data corruption.
+
+Test with 'ping -s 10000' on a fast computer.
+
+*/
+
+
+
+/*
+  PCI probe table.
+*/
+enum chip_capability_flags {
+	CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(w840_pci_tbl) = {
+	{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153,     0, 0, 0 },
+	{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+	{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
+
+enum {
+	netdev_res_size		= 128,	/* size of PCI BAR resource */
+};
+
+struct pci_id_info {
+        const char *name;
+        int drv_flags;		/* Driver use, intended as capability flags. */
+};
+
+static const struct pci_id_info pci_id_tbl[] __devinitdata = {
+	{ 				/* Sometime a Level-One switch card. */
+	  "Winbond W89c840",	CanHaveMII | HasBrokenTx | FDXOnNoMII},
+	{ "Winbond W89c840",	CanHaveMII | HasBrokenTx},
+	{ "Compex RL100-ATX",	CanHaveMII | HasBrokenTx},
+	{ }	/* terminate list. */
+};
+
+/* This driver was written to use PCI memory space, however some x86 systems
+   work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config
+*/
+
+/* Offsets to the Command and Status Registers, "CSRs".
+   While similar to the Tulip, these registers are longword aligned.
+   Note: It's not useful to define symbolic names for every register bit in
+   the device.  The name can only partially document the semantics and make
+   the driver longer and more difficult to read.
+*/
+enum w840_offsets {
+	PCIBusCfg=0x00, TxStartDemand=0x04, RxStartDemand=0x08,
+	RxRingPtr=0x0C, TxRingPtr=0x10,
+	IntrStatus=0x14, NetworkConfig=0x18, IntrEnable=0x1C,
+	RxMissed=0x20, EECtrl=0x24, MIICtrl=0x24, BootRom=0x28, GPTimer=0x2C,
+	CurRxDescAddr=0x30, CurRxBufAddr=0x34,			/* Debug use */
+	MulticastFilter0=0x38, MulticastFilter1=0x3C, StationAddr=0x40,
+	CurTxDescAddr=0x4C, CurTxBufAddr=0x50,
+};
+
+/* Bits in the NetworkConfig register. */
+enum rx_mode_bits {
+	AcceptErr=0x80,
+	RxAcceptBroadcast=0x20, AcceptMulticast=0x10,
+	RxAcceptAllPhys=0x08, AcceptMyPhys=0x02,
+};
+
+enum mii_reg_bits {
+	MDIO_ShiftClk=0x10000, MDIO_DataIn=0x80000, MDIO_DataOut=0x20000,
+	MDIO_EnbOutput=0x40000, MDIO_EnbIn = 0x00000,
+};
+
+/* The Tulip Rx and Tx buffer descriptors. */
+struct w840_rx_desc {
+	s32 status;
+	s32 length;
+	u32 buffer1;
+	u32 buffer2;
+};
+
+struct w840_tx_desc {
+	s32 status;
+	s32 length;
+	u32 buffer1, buffer2;
+};
+
+#define MII_CNT		1 /* winbond only supports one MII */
+struct netdev_private {
+	struct w840_rx_desc *rx_ring;
+	dma_addr_t	rx_addr[RX_RING_SIZE];
+	struct w840_tx_desc *tx_ring;
+	dma_addr_t	tx_addr[TX_RING_SIZE];
+	dma_addr_t ring_dma_addr;
+	/* The addresses of receive-in-place skbuffs. */
+	struct sk_buff* rx_skbuff[RX_RING_SIZE];
+	/* The saved address of a sent-in-place packet/buffer, for later free(). */
+	struct sk_buff* tx_skbuff[TX_RING_SIZE];
+	struct net_device_stats stats;
+	struct timer_list timer;	/* Media monitoring timer. */
+	/* Frequently used values: keep some adjacent for cache effect. */
+	spinlock_t lock;
+	int chip_id, drv_flags;
+	struct pci_dev *pci_dev;
+	int csr6;
+	struct w840_rx_desc *rx_head_desc;
+	unsigned int cur_rx, dirty_rx;		/* Producer/consumer ring indices */
+	unsigned int rx_buf_sz;				/* Based on MTU+slack. */
+	unsigned int cur_tx, dirty_tx;
+	unsigned int tx_q_bytes;
+	unsigned int tx_full;				/* The Tx queue is full. */
+	/* MII transceiver section. */
+	int mii_cnt;						/* MII device addresses. */
+	unsigned char phys[MII_CNT];		/* MII device addresses, but only the first is used */
+	u32 mii;
+	struct mii_if_info mii_if;
+	void __iomem *base_addr;
+};
+
+static int  eeprom_read(void __iomem *ioaddr, int location);
+static int  mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int  netdev_open(struct net_device *dev);
+static int  update_link(struct net_device *dev);
+static void netdev_timer(unsigned long data);
+static void init_rxtx_rings(struct net_device *dev);
+static void free_rxtx_rings(struct netdev_private *np);
+static void init_registers(struct net_device *dev);
+static void tx_timeout(struct net_device *dev);
+static int alloc_ringdesc(struct net_device *dev);
+static void free_ringdesc(struct netdev_private *np);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t intr_handler(int irq, void *dev_instance);
+static void netdev_error(struct net_device *dev, int intr_status);
+static int  netdev_rx(struct net_device *dev);
+static u32 __set_rx_mode(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static struct net_device_stats *get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops netdev_ethtool_ops;
+static int  netdev_close(struct net_device *dev);
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= netdev_open,
+	.ndo_stop		= netdev_close,
+	.ndo_start_xmit		= start_tx,
+	.ndo_get_stats		= get_stats,
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_do_ioctl		= netdev_ioctl,
+	.ndo_tx_timeout		= tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int __devinit w840_probe1 (struct pci_dev *pdev,
+				  const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct netdev_private *np;
+	static int find_cnt;
+	int chip_idx = ent->driver_data;
+	int irq;
+	int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
+	void __iomem *ioaddr;
+
+	i = pci_enable_device(pdev);
+	if (i) return i;
+
+	pci_set_master(pdev);
+
+	irq = pdev->irq;
+
+	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		pr_warn("Device %s disabled due to DMA limitations\n",
+			pci_name(pdev));
+		return -EIO;
+	}
+	dev = alloc_etherdev(sizeof(*np));
+	if (!dev)
+		return -ENOMEM;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pci_request_regions(pdev, DRV_NAME))
+		goto err_out_netdev;
+
+	ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size);
+	if (!ioaddr)
+		goto err_out_free_res;
+
+	for (i = 0; i < 3; i++)
+		((__le16 *)dev->dev_addr)[i] = cpu_to_le16(eeprom_read(ioaddr, i));
+
+	/* Reset the chip to erase previous misconfiguration.
+	   No hold time required! */
+	iowrite32(0x00000001, ioaddr + PCIBusCfg);
+
+	dev->base_addr = (unsigned long)ioaddr;
+	dev->irq = irq;
+
+	np = netdev_priv(dev);
+	np->pci_dev = pdev;
+	np->chip_id = chip_idx;
+	np->drv_flags = pci_id_tbl[chip_idx].drv_flags;
+	spin_lock_init(&np->lock);
+	np->mii_if.dev = dev;
+	np->mii_if.mdio_read = mdio_read;
+	np->mii_if.mdio_write = mdio_write;
+	np->base_addr = ioaddr;
+
+	pci_set_drvdata(pdev, dev);
+
+	if (dev->mem_start)
+		option = dev->mem_start;
+
+	/* The lower four bits are the media type. */
+	if (option > 0) {
+		if (option & 0x200)
+			np->mii_if.full_duplex = 1;
+		if (option & 15)
+			dev_info(&dev->dev,
+				 "ignoring user supplied media type %d",
+				 option & 15);
+	}
+	if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt] > 0)
+		np->mii_if.full_duplex = 1;
+
+	if (np->mii_if.full_duplex)
+		np->mii_if.force_media = 1;
+
+	/* The chip-specific entries in the device structure. */
+	dev->netdev_ops = &netdev_ops;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	i = register_netdev(dev);
+	if (i)
+		goto err_out_cleardev;
+
+	dev_info(&dev->dev, "%s at %p, %pM, IRQ %d\n",
+		 pci_id_tbl[chip_idx].name, ioaddr, dev->dev_addr, irq);
+
+	if (np->drv_flags & CanHaveMII) {
+		int phy, phy_idx = 0;
+		for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+			int mii_status = mdio_read(dev, phy, MII_BMSR);
+			if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+				np->phys[phy_idx++] = phy;
+				np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+				np->mii = (mdio_read(dev, phy, MII_PHYSID1) << 16)+
+						mdio_read(dev, phy, MII_PHYSID2);
+				dev_info(&dev->dev,
+					 "MII PHY %08xh found at address %d, status 0x%04x advertising %04x\n",
+					 np->mii, phy, mii_status,
+					 np->mii_if.advertising);
+			}
+		}
+		np->mii_cnt = phy_idx;
+		np->mii_if.phy_id = np->phys[0];
+		if (phy_idx == 0) {
+			dev_warn(&dev->dev,
+				 "MII PHY not found -- this device may not operate correctly\n");
+		}
+	}
+
+	find_cnt++;
+	return 0;
+
+err_out_cleardev:
+	pci_set_drvdata(pdev, NULL);
+	pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+	pci_release_regions(pdev);
+err_out_netdev:
+	free_netdev (dev);
+	return -ENODEV;
+}
+
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.  These are
+   often serial bit streams generated by the host processor.
+   The example below is for the common 93c46 EEPROM, 64 16 bit words. */
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
+   a delay.  Note that pre-2.0.34 kernels had a cache-alignment bug that
+   made udelay() unreliable.
+   The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
+   deprecated.
+*/
+#define eeprom_delay(ee_addr)	ioread32(ee_addr)
+
+enum EEPROM_Ctrl_Bits {
+	EE_ShiftClk=0x02, EE_Write0=0x801, EE_Write1=0x805,
+	EE_ChipSelect=0x801, EE_DataIn=0x08,
+};
+
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+	EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+};
+
+static int eeprom_read(void __iomem *addr, int location)
+{
+	int i;
+	int retval = 0;
+	void __iomem *ee_addr = addr + EECtrl;
+	int read_cmd = location | EE_ReadCmd;
+	iowrite32(EE_ChipSelect, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		iowrite32(dataval, ee_addr);
+		eeprom_delay(ee_addr);
+		iowrite32(dataval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+	iowrite32(EE_ChipSelect, ee_addr);
+	eeprom_delay(ee_addr);
+
+	for (i = 16; i > 0; i--) {
+		iowrite32(EE_ChipSelect | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+		retval = (retval << 1) | ((ioread32(ee_addr) & EE_DataIn) ? 1 : 0);
+		iowrite32(EE_ChipSelect, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	iowrite32(0, ee_addr);
+	return retval;
+}
+
+/*  MII transceiver control section.
+	Read and write the MII registers using software-generated serial
+	MDIO protocol.  See the MII specifications or DP83840A data sheet
+	for details.
+
+	The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
+	met by back-to-back 33Mhz PCI cycles. */
+#define mdio_delay(mdio_addr) ioread32(mdio_addr)
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+   This only set with older transceivers, so the extra
+   code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required = 1;
+
+#define MDIO_WRITE0 (MDIO_EnbOutput)
+#define MDIO_WRITE1 (MDIO_DataOut | MDIO_EnbOutput)
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void mdio_sync(void __iomem *mdio_addr)
+{
+	int bits = 32;
+
+	/* Establish sync by sending at least 32 logic ones. */
+	while (--bits >= 0) {
+		iowrite32(MDIO_WRITE1, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *mdio_addr = np->base_addr + MIICtrl;
+	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+	int i, retval = 0;
+
+	if (mii_preamble_required)
+		mdio_sync(mdio_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		iowrite32(dataval, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 20; i > 0; i--) {
+		iowrite32(MDIO_EnbIn, mdio_addr);
+		mdio_delay(mdio_addr);
+		retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DataIn) ? 1 : 0);
+		iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *mdio_addr = np->base_addr + MIICtrl;
+	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
+	int i;
+
+	if (location == 4  &&  phy_id == np->phys[0])
+		np->mii_if.advertising = value;
+
+	if (mii_preamble_required)
+		mdio_sync(mdio_addr);
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		iowrite32(dataval, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(dataval | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		iowrite32(MDIO_EnbIn, mdio_addr);
+		mdio_delay(mdio_addr);
+		iowrite32(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr);
+		mdio_delay(mdio_addr);
+	}
+}
+
+
+static int netdev_open(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int i;
+
+	iowrite32(0x00000001, ioaddr + PCIBusCfg);		/* Reset */
+
+	netif_device_detach(dev);
+	i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
+	if (i)
+		goto out_err;
+
+	if (debug > 1)
+		netdev_dbg(dev, "w89c840_open() irq %d\n", dev->irq);
+
+	if((i=alloc_ringdesc(dev)))
+		goto out_err;
+
+	spin_lock_irq(&np->lock);
+	netif_device_attach(dev);
+	init_registers(dev);
+	spin_unlock_irq(&np->lock);
+
+	netif_start_queue(dev);
+	if (debug > 2)
+		netdev_dbg(dev, "Done netdev_open()\n");
+
+	/* Set the timer to check for link beat. */
+	init_timer(&np->timer);
+	np->timer.expires = jiffies + 1*HZ;
+	np->timer.data = (unsigned long)dev;
+	np->timer.function = netdev_timer;				/* timer handler */
+	add_timer(&np->timer);
+	return 0;
+out_err:
+	netif_device_attach(dev);
+	return i;
+}
+
+#define MII_DAVICOM_DM9101	0x0181b800
+
+static int update_link(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int duplex, fasteth, result, mii_reg;
+
+	/* BSMR */
+	mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
+
+	if (mii_reg == 0xffff)
+		return np->csr6;
+	/* reread: the link status bit is sticky */
+	mii_reg = mdio_read(dev, np->phys[0], MII_BMSR);
+	if (!(mii_reg & 0x4)) {
+		if (netif_carrier_ok(dev)) {
+			if (debug)
+				dev_info(&dev->dev,
+					 "MII #%d reports no link. Disabling watchdog\n",
+					 np->phys[0]);
+			netif_carrier_off(dev);
+		}
+		return np->csr6;
+	}
+	if (!netif_carrier_ok(dev)) {
+		if (debug)
+			dev_info(&dev->dev,
+				 "MII #%d link is back. Enabling watchdog\n",
+				 np->phys[0]);
+		netif_carrier_on(dev);
+	}
+
+	if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) {
+		/* If the link partner doesn't support autonegotiation
+		 * the MII detects it's abilities with the "parallel detection".
+		 * Some MIIs update the LPA register to the result of the parallel
+		 * detection, some don't.
+		 * The Davicom PHY [at least 0181b800] doesn't.
+		 * Instead bit 9 and 13 of the BMCR are updated to the result
+		 * of the negotiation..
+		 */
+		mii_reg = mdio_read(dev, np->phys[0], MII_BMCR);
+		duplex = mii_reg & BMCR_FULLDPLX;
+		fasteth = mii_reg & BMCR_SPEED100;
+	} else {
+		int negotiated;
+		mii_reg	= mdio_read(dev, np->phys[0], MII_LPA);
+		negotiated = mii_reg & np->mii_if.advertising;
+
+		duplex = (negotiated & LPA_100FULL) || ((negotiated & 0x02C0) == LPA_10FULL);
+		fasteth = negotiated & 0x380;
+	}
+	duplex |= np->mii_if.force_media;
+	/* remove fastether and fullduplex */
+	result = np->csr6 & ~0x20000200;
+	if (duplex)
+		result |= 0x200;
+	if (fasteth)
+		result |= 0x20000000;
+	if (result != np->csr6 && debug)
+		dev_info(&dev->dev,
+			 "Setting %dMBit-%s-duplex based on MII#%d\n",
+			 fasteth ? 100 : 10, duplex ? "full" : "half",
+			 np->phys[0]);
+	return result;
+}
+
+#define RXTX_TIMEOUT	2000
+static inline void update_csr6(struct net_device *dev, int new)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int limit = RXTX_TIMEOUT;
+
+	if (!netif_device_present(dev))
+		new = 0;
+	if (new==np->csr6)
+		return;
+	/* stop both Tx and Rx processes */
+	iowrite32(np->csr6 & ~0x2002, ioaddr + NetworkConfig);
+	/* wait until they have really stopped */
+	for (;;) {
+		int csr5 = ioread32(ioaddr + IntrStatus);
+		int t;
+
+		t = (csr5 >> 17) & 0x07;
+		if (t==0||t==1) {
+			/* rx stopped */
+			t = (csr5 >> 20) & 0x07;
+			if (t==0||t==1)
+				break;
+		}
+
+		limit--;
+		if(!limit) {
+			dev_info(&dev->dev,
+				 "couldn't stop rxtx, IntrStatus %xh\n", csr5);
+			break;
+		}
+		udelay(1);
+	}
+	np->csr6 = new;
+	/* and restart them with the new configuration */
+	iowrite32(np->csr6, ioaddr + NetworkConfig);
+	if (new & 0x200)
+		np->mii_if.full_duplex = 1;
+}
+
+static void netdev_timer(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	if (debug > 2)
+		netdev_dbg(dev, "Media selection timer tick, status %08x config %08x\n",
+			   ioread32(ioaddr + IntrStatus),
+			   ioread32(ioaddr + NetworkConfig));
+	spin_lock_irq(&np->lock);
+	update_csr6(dev, update_link(dev));
+	spin_unlock_irq(&np->lock);
+	np->timer.expires = jiffies + 10*HZ;
+	add_timer(&np->timer);
+}
+
+static void init_rxtx_rings(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	np->rx_head_desc = &np->rx_ring[0];
+	np->tx_ring = (struct w840_tx_desc*)&np->rx_ring[RX_RING_SIZE];
+
+	/* Initial all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].length = np->rx_buf_sz;
+		np->rx_ring[i].status = 0;
+		np->rx_skbuff[i] = NULL;
+	}
+	/* Mark the last entry as wrapping the ring. */
+	np->rx_ring[i-1].length |= DescEndRing;
+
+	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+		np->rx_skbuff[i] = skb;
+		if (skb == NULL)
+			break;
+		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
+					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
+
+		np->rx_ring[i].buffer1 = np->rx_addr[i];
+		np->rx_ring[i].status = DescOwned;
+	}
+
+	np->cur_rx = 0;
+	np->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+
+	/* Initialize the Tx descriptors */
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		np->tx_skbuff[i] = NULL;
+		np->tx_ring[i].status = 0;
+	}
+	np->tx_full = 0;
+	np->tx_q_bytes = np->dirty_tx = np->cur_tx = 0;
+
+	iowrite32(np->ring_dma_addr, np->base_addr + RxRingPtr);
+	iowrite32(np->ring_dma_addr+sizeof(struct w840_rx_desc)*RX_RING_SIZE,
+		np->base_addr + TxRingPtr);
+
+}
+
+static void free_rxtx_rings(struct netdev_private* np)
+{
+	int i;
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].status = 0;
+		if (np->rx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+						np->rx_addr[i],
+						np->rx_skbuff[i]->len,
+						PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(np->rx_skbuff[i]);
+		}
+		np->rx_skbuff[i] = NULL;
+	}
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		if (np->tx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+						np->tx_addr[i],
+						np->tx_skbuff[i]->len,
+						PCI_DMA_TODEVICE);
+			dev_kfree_skb(np->tx_skbuff[i]);
+		}
+		np->tx_skbuff[i] = NULL;
+	}
+}
+
+static void init_registers(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int i;
+
+	for (i = 0; i < 6; i++)
+		iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+	/* Initialize other registers. */
+#ifdef __BIG_ENDIAN
+	i = (1<<20);	/* Big-endian descriptors */
+#else
+	i = 0;
+#endif
+	i |= (0x04<<2);		/* skip length 4 u32 */
+	i |= 0x02;		/* give Rx priority */
+
+	/* Configure the PCI bus bursts and FIFO thresholds.
+	   486: Set 8 longword cache alignment, 8 longword burst.
+	   586: Set 16 longword cache alignment, no burst limit.
+	   Cache alignment bits 15:14	     Burst length 13:8
+		0000	<not allowed> 		0000 align to cache	0800 8 longwords
+		4000	8  longwords		0100 1 longword		1000 16 longwords
+		8000	16 longwords		0200 2 longwords	2000 32 longwords
+		C000	32  longwords		0400 4 longwords */
+
+#if defined (__i386__) && !defined(MODULE)
+	/* When not a module we can work around broken '486 PCI boards. */
+	if (boot_cpu_data.x86 <= 4) {
+		i |= 0x4800;
+		dev_info(&dev->dev,
+			 "This is a 386/486 PCI system, setting cache alignment to 8 longwords\n");
+	} else {
+		i |= 0xE000;
+	}
+#elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
+	i |= 0xE000;
+#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC)
+	i |= 0x4800;
+#else
+#warning Processor architecture undefined
+	i |= 0x4800;
+#endif
+	iowrite32(i, ioaddr + PCIBusCfg);
+
+	np->csr6 = 0;
+	/* 128 byte Tx threshold;
+		Transmit on; Receive on; */
+	update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev));
+
+	/* Clear and Enable interrupts by setting the interrupt mask. */
+	iowrite32(0x1A0F5, ioaddr + IntrStatus);
+	iowrite32(0x1A0F5, ioaddr + IntrEnable);
+
+	iowrite32(0, ioaddr + RxStartDemand);
+}
+
+static void tx_timeout(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	dev_warn(&dev->dev, "Transmit timed out, status %08x, resetting...\n",
+		 ioread32(ioaddr + IntrStatus));
+
+	{
+		int i;
+		printk(KERN_DEBUG "  Rx ring %p: ", np->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++)
+			printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status);
+		printk(KERN_CONT "\n");
+		printk(KERN_DEBUG "  Tx ring %p: ", np->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			printk(KERN_CONT " %08x", np->tx_ring[i].status);
+		printk(KERN_CONT "\n");
+	}
+	printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n",
+	       np->cur_tx, np->dirty_tx, np->tx_full, np->tx_q_bytes);
+	printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C));
+
+	disable_irq(dev->irq);
+	spin_lock_irq(&np->lock);
+	/*
+	 * Under high load dirty_tx and the internal tx descriptor pointer
+	 * come out of sync, thus perform a software reset and reinitialize
+	 * everything.
+	 */
+
+	iowrite32(1, np->base_addr+PCIBusCfg);
+	udelay(1);
+
+	free_rxtx_rings(np);
+	init_rxtx_rings(dev);
+	init_registers(dev);
+	spin_unlock_irq(&np->lock);
+	enable_irq(dev->irq);
+
+	netif_wake_queue(dev);
+	dev->trans_start = jiffies; /* prevent tx timeout */
+	np->stats.tx_errors++;
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static int alloc_ringdesc(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	np->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+
+	np->rx_ring = pci_alloc_consistent(np->pci_dev,
+			sizeof(struct w840_rx_desc)*RX_RING_SIZE +
+			sizeof(struct w840_tx_desc)*TX_RING_SIZE,
+			&np->ring_dma_addr);
+	if(!np->rx_ring)
+		return -ENOMEM;
+	init_rxtx_rings(dev);
+	return 0;
+}
+
+static void free_ringdesc(struct netdev_private *np)
+{
+	pci_free_consistent(np->pci_dev,
+			sizeof(struct w840_rx_desc)*RX_RING_SIZE +
+			sizeof(struct w840_tx_desc)*TX_RING_SIZE,
+			np->rx_ring, np->ring_dma_addr);
+
+}
+
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	unsigned entry;
+
+	/* Caution: the write order is important here, set the field
+	   with the "ownership" bits last. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = np->cur_tx % TX_RING_SIZE;
+
+	np->tx_addr[entry] = pci_map_single(np->pci_dev,
+				skb->data,skb->len, PCI_DMA_TODEVICE);
+	np->tx_skbuff[entry] = skb;
+
+	np->tx_ring[entry].buffer1 = np->tx_addr[entry];
+	if (skb->len < TX_BUFLIMIT) {
+		np->tx_ring[entry].length = DescWholePkt | skb->len;
+	} else {
+		int len = skb->len - TX_BUFLIMIT;
+
+		np->tx_ring[entry].buffer2 = np->tx_addr[entry]+TX_BUFLIMIT;
+		np->tx_ring[entry].length = DescWholePkt | (len << 11) | TX_BUFLIMIT;
+	}
+	if(entry == TX_RING_SIZE-1)
+		np->tx_ring[entry].length |= DescEndRing;
+
+	/* Now acquire the irq spinlock.
+	 * The difficult race is the ordering between
+	 * increasing np->cur_tx and setting DescOwned:
+	 * - if np->cur_tx is increased first the interrupt
+	 *   handler could consider the packet as transmitted
+	 *   since DescOwned is cleared.
+	 * - If DescOwned is set first the NIC could report the
+	 *   packet as sent, but the interrupt handler would ignore it
+	 *   since the np->cur_tx was not yet increased.
+	 */
+	spin_lock_irq(&np->lock);
+	np->cur_tx++;
+
+	wmb(); /* flush length, buffer1, buffer2 */
+	np->tx_ring[entry].status = DescOwned;
+	wmb(); /* flush status and kick the hardware */
+	iowrite32(0, np->base_addr + TxStartDemand);
+	np->tx_q_bytes += skb->len;
+	/* Work around horrible bug in the chip by marking the queue as full
+	   when we do not have FIFO room for a maximum sized packet. */
+	if (np->cur_tx - np->dirty_tx > TX_QUEUE_LEN ||
+		((np->drv_flags & HasBrokenTx) && np->tx_q_bytes > TX_BUG_FIFO_LIMIT)) {
+		netif_stop_queue(dev);
+		wmb();
+		np->tx_full = 1;
+	}
+	spin_unlock_irq(&np->lock);
+
+	if (debug > 4) {
+		netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+			   np->cur_tx, entry);
+	}
+	return NETDEV_TX_OK;
+}
+
+static void netdev_tx_done(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+		int entry = np->dirty_tx % TX_RING_SIZE;
+		int tx_status = np->tx_ring[entry].status;
+
+		if (tx_status < 0)
+			break;
+		if (tx_status & 0x8000) { 	/* There was an error, log it. */
+#ifndef final_version
+			if (debug > 1)
+				netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+					   tx_status);
+#endif
+			np->stats.tx_errors++;
+			if (tx_status & 0x0104) np->stats.tx_aborted_errors++;
+			if (tx_status & 0x0C80) np->stats.tx_carrier_errors++;
+			if (tx_status & 0x0200) np->stats.tx_window_errors++;
+			if (tx_status & 0x0002) np->stats.tx_fifo_errors++;
+			if ((tx_status & 0x0080) && np->mii_if.full_duplex == 0)
+				np->stats.tx_heartbeat_errors++;
+		} else {
+#ifndef final_version
+			if (debug > 3)
+				netdev_dbg(dev, "Transmit slot %d ok, Tx status %08x\n",
+					   entry, tx_status);
+#endif
+			np->stats.tx_bytes += np->tx_skbuff[entry]->len;
+			np->stats.collisions += (tx_status >> 3) & 15;
+			np->stats.tx_packets++;
+		}
+		/* Free the original skb. */
+		pci_unmap_single(np->pci_dev,np->tx_addr[entry],
+					np->tx_skbuff[entry]->len,
+					PCI_DMA_TODEVICE);
+		np->tx_q_bytes -= np->tx_skbuff[entry]->len;
+		dev_kfree_skb_irq(np->tx_skbuff[entry]);
+		np->tx_skbuff[entry] = NULL;
+	}
+	if (np->tx_full &&
+		np->cur_tx - np->dirty_tx < TX_QUEUE_LEN_RESTART &&
+		np->tx_q_bytes < TX_BUG_FIFO_LIMIT) {
+		/* The ring is no longer full, clear tbusy. */
+		np->tx_full = 0;
+		wmb();
+		netif_wake_queue(dev);
+	}
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+   after the Tx thread. */
+static irqreturn_t intr_handler(int irq, void *dev_instance)
+{
+	struct net_device *dev = (struct net_device *)dev_instance;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	int work_limit = max_interrupt_work;
+	int handled = 0;
+
+	if (!netif_device_present(dev))
+		return IRQ_NONE;
+	do {
+		u32 intr_status = ioread32(ioaddr + IntrStatus);
+
+		/* Acknowledge all of the current interrupt sources ASAP. */
+		iowrite32(intr_status & 0x001ffff, ioaddr + IntrStatus);
+
+		if (debug > 4)
+			netdev_dbg(dev, "Interrupt, status %04x\n", intr_status);
+
+		if ((intr_status & (NormalIntr|AbnormalIntr)) == 0)
+			break;
+
+		handled = 1;
+
+		if (intr_status & (RxIntr | RxNoBuf))
+			netdev_rx(dev);
+		if (intr_status & RxNoBuf)
+			iowrite32(0, ioaddr + RxStartDemand);
+
+		if (intr_status & (TxNoBuf | TxIntr) &&
+			np->cur_tx != np->dirty_tx) {
+			spin_lock(&np->lock);
+			netdev_tx_done(dev);
+			spin_unlock(&np->lock);
+		}
+
+		/* Abnormal error summary/uncommon events handlers. */
+		if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SystemError |
+						   TimerInt | TxDied))
+			netdev_error(dev, intr_status);
+
+		if (--work_limit < 0) {
+			dev_warn(&dev->dev,
+				 "Too much work at interrupt, status=0x%04x\n",
+				 intr_status);
+			/* Set the timer to re-enable the other interrupts after
+			   10*82usec ticks. */
+			spin_lock(&np->lock);
+			if (netif_device_present(dev)) {
+				iowrite32(AbnormalIntr | TimerInt, ioaddr + IntrEnable);
+				iowrite32(10, ioaddr + GPTimer);
+			}
+			spin_unlock(&np->lock);
+			break;
+		}
+	} while (1);
+
+	if (debug > 3)
+		netdev_dbg(dev, "exiting interrupt, status=%#4.4x\n",
+			   ioread32(ioaddr + IntrStatus));
+	return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but separated
+   for clarity and better register allocation. */
+static int netdev_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int entry = np->cur_rx % RX_RING_SIZE;
+	int work_limit = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
+
+	if (debug > 4) {
+		netdev_dbg(dev, " In netdev_rx(), entry %d status %04x\n",
+			   entry, np->rx_ring[entry].status);
+	}
+
+	/* If EOP is set on the next entry, it's a new packet. Send it up. */
+	while (--work_limit >= 0) {
+		struct w840_rx_desc *desc = np->rx_head_desc;
+		s32 status = desc->status;
+
+		if (debug > 4)
+			netdev_dbg(dev, "  netdev_rx() status was %08x\n",
+				   status);
+		if (status < 0)
+			break;
+		if ((status & 0x38008300) != 0x0300) {
+			if ((status & 0x38000300) != 0x0300) {
+				/* Ingore earlier buffers. */
+				if ((status & 0xffff) != 0x7fff) {
+					dev_warn(&dev->dev,
+						 "Oversized Ethernet frame spanned multiple buffers, entry %#x status %04x!\n",
+						 np->cur_rx, status);
+					np->stats.rx_length_errors++;
+				}
+			} else if (status & 0x8000) {
+				/* There was a fatal error. */
+				if (debug > 2)
+					netdev_dbg(dev, "Receive error, Rx status %08x\n",
+						   status);
+				np->stats.rx_errors++; /* end of a packet.*/
+				if (status & 0x0890) np->stats.rx_length_errors++;
+				if (status & 0x004C) np->stats.rx_frame_errors++;
+				if (status & 0x0002) np->stats.rx_crc_errors++;
+			}
+		} else {
+			struct sk_buff *skb;
+			/* Omit the four octet CRC from the length. */
+			int pkt_len = ((status >> 16) & 0x7ff) - 4;
+
+#ifndef final_version
+			if (debug > 4)
+				netdev_dbg(dev, "  netdev_rx() normal Rx pkt length %d status %x\n",
+					   pkt_len, status);
+#endif
+			/* Check if the packet is long enough to accept without copying
+			   to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+				skb_reserve(skb, 2);	/* 16 byte align the IP header */
+				pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
+							    np->rx_skbuff[entry]->len,
+							    PCI_DMA_FROMDEVICE);
+				skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
+				skb_put(skb, pkt_len);
+				pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry],
+							       np->rx_skbuff[entry]->len,
+							       PCI_DMA_FROMDEVICE);
+			} else {
+				pci_unmap_single(np->pci_dev,np->rx_addr[entry],
+							np->rx_skbuff[entry]->len,
+							PCI_DMA_FROMDEVICE);
+				skb_put(skb = np->rx_skbuff[entry], pkt_len);
+				np->rx_skbuff[entry] = NULL;
+			}
+#ifndef final_version				/* Remove after testing. */
+			/* You will want this info for the initial debug. */
+			if (debug > 5)
+				netdev_dbg(dev, "  Rx data %pM %pM %02x%02x %pI4\n",
+					   &skb->data[0], &skb->data[6],
+					   skb->data[12], skb->data[13],
+					   &skb->data[14]);
+#endif
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_rx(skb);
+			np->stats.rx_packets++;
+			np->stats.rx_bytes += pkt_len;
+		}
+		entry = (++np->cur_rx) % RX_RING_SIZE;
+		np->rx_head_desc = &np->rx_ring[entry];
+	}
+
+	/* Refill the Rx ring buffers. */
+	for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
+		struct sk_buff *skb;
+		entry = np->dirty_rx % RX_RING_SIZE;
+		if (np->rx_skbuff[entry] == NULL) {
+			skb = dev_alloc_skb(np->rx_buf_sz);
+			np->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break;			/* Better luck next round. */
+			np->rx_addr[entry] = pci_map_single(np->pci_dev,
+							skb->data,
+							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
+			np->rx_ring[entry].buffer1 = np->rx_addr[entry];
+		}
+		wmb();
+		np->rx_ring[entry].status = DescOwned;
+	}
+
+	return 0;
+}
+
+static void netdev_error(struct net_device *dev, int intr_status)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	if (debug > 2)
+		netdev_dbg(dev, "Abnormal event, %08x\n", intr_status);
+	if (intr_status == 0xffffffff)
+		return;
+	spin_lock(&np->lock);
+	if (intr_status & TxFIFOUnderflow) {
+		int new;
+		/* Bump up the Tx threshold */
+#if 0
+		/* This causes lots of dropped packets,
+		 * and under high load even tx_timeouts
+		 */
+		new = np->csr6 + 0x4000;
+#else
+		new = (np->csr6 >> 14)&0x7f;
+		if (new < 64)
+			new *= 2;
+		 else
+		 	new = 127; /* load full packet before starting */
+		new = (np->csr6 & ~(0x7F << 14)) | (new<<14);
+#endif
+		netdev_dbg(dev, "Tx underflow, new csr6 %08x\n", new);
+		update_csr6(dev, new);
+	}
+	if (intr_status & RxDied) {		/* Missed a Rx frame. */
+		np->stats.rx_errors++;
+	}
+	if (intr_status & TimerInt) {
+		/* Re-enable other interrupts. */
+		if (netif_device_present(dev))
+			iowrite32(0x1A0F5, ioaddr + IntrEnable);
+	}
+	np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+	iowrite32(0, ioaddr + RxStartDemand);
+	spin_unlock(&np->lock);
+}
+
+static struct net_device_stats *get_stats(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	/* The chip only need report frame silently dropped. */
+	spin_lock_irq(&np->lock);
+	if (netif_running(dev) && netif_device_present(dev))
+		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+	spin_unlock_irq(&np->lock);
+
+	return &np->stats;
+}
+
+
+static u32 __set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+	u32 mc_filter[2];			/* Multicast hash filter */
+	u32 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
+			| AcceptMyPhys;
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to match, or accept all multicasts. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+	} else {
+		struct netdev_hw_addr *ha;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			int filbit;
+
+			filbit = (ether_crc(ETH_ALEN, ha->addr) >> 26) ^ 0x3F;
+			filbit &= 0x3f;
+			mc_filter[filbit >> 5] |= 1 << (filbit & 31);
+		}
+		rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+	}
+	iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
+	iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
+	return rx_mode;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u32 rx_mode = __set_rx_mode(dev);
+	spin_lock_irq(&np->lock);
+	update_csr6(dev, (np->csr6 & ~0x00F8) | rx_mode);
+	spin_unlock_irq(&np->lock);
+}
+
+static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	strcpy (info->driver, DRV_NAME);
+	strcpy (info->version, DRV_VERSION);
+	strcpy (info->bus_info, pci_name(np->pci_dev));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_gset(&np->mii_if, cmd);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int rc;
+
+	spin_lock_irq(&np->lock);
+	rc = mii_ethtool_sset(&np->mii_if, cmd);
+	spin_unlock_irq(&np->lock);
+
+	return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return mii_nway_restart(&np->mii_if);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return mii_link_ok(&np->mii_if);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+	return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+	debug = value;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.set_settings		= netdev_set_settings,
+	.nway_reset		= netdev_nway_reset,
+	.get_link		= netdev_get_link,
+	.get_msglevel		= netdev_get_msglevel,
+	.set_msglevel		= netdev_set_msglevel,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct mii_ioctl_data *data = if_mii(rq);
+	struct netdev_private *np = netdev_priv(dev);
+
+	switch(cmd) {
+	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+		data->phy_id = ((struct netdev_private *)netdev_priv(dev))->phys[0] & 0x1f;
+		/* Fall Through */
+
+	case SIOCGMIIREG:		/* Read MII PHY register. */
+		spin_lock_irq(&np->lock);
+		data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+		spin_unlock_irq(&np->lock);
+		return 0;
+
+	case SIOCSMIIREG:		/* Write MII PHY register. */
+		spin_lock_irq(&np->lock);
+		mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+		spin_unlock_irq(&np->lock);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int netdev_close(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	netif_stop_queue(dev);
+
+	if (debug > 1) {
+		netdev_dbg(dev, "Shutting down ethercard, status was %08x Config %08x\n",
+			   ioread32(ioaddr + IntrStatus),
+			   ioread32(ioaddr + NetworkConfig));
+		netdev_dbg(dev, "Queue pointers were Tx %d / %d,  Rx %d / %d\n",
+			   np->cur_tx, np->dirty_tx,
+			   np->cur_rx, np->dirty_rx);
+	}
+
+ 	/* Stop the chip's Tx and Rx processes. */
+	spin_lock_irq(&np->lock);
+	netif_device_detach(dev);
+	update_csr6(dev, 0);
+	iowrite32(0x0000, ioaddr + IntrEnable);
+	spin_unlock_irq(&np->lock);
+
+	free_irq(dev->irq, dev);
+	wmb();
+	netif_device_attach(dev);
+
+	if (ioread32(ioaddr + NetworkConfig) != 0xffffffff)
+		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+
+#ifdef __i386__
+	if (debug > 2) {
+		int i;
+
+		printk(KERN_DEBUG"  Tx ring at %p:\n", np->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++)
+			printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+			       i, np->tx_ring[i].length,
+			       np->tx_ring[i].status, np->tx_ring[i].buffer1);
+		printk(KERN_DEBUG "  Rx ring %p:\n", np->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
+			       i, np->rx_ring[i].length,
+			       np->rx_ring[i].status, np->rx_ring[i].buffer1);
+		}
+	}
+#endif /* __i386__ debugging only */
+
+	del_timer_sync(&np->timer);
+
+	free_rxtx_rings(np);
+	free_ringdesc(np);
+
+	return 0;
+}
+
+static void __devexit w840_remove1 (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (dev) {
+		struct netdev_private *np = netdev_priv(dev);
+		unregister_netdev(dev);
+		pci_release_regions(pdev);
+		pci_iounmap(pdev, np->base_addr);
+		free_netdev(dev);
+	}
+
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * suspend/resume synchronization:
+ * - open, close, do_ioctl:
+ * 	rtnl_lock, & netif_device_detach after the rtnl_unlock.
+ * - get_stats:
+ * 	spin_lock_irq(np->lock), doesn't touch hw if not present
+ * - start_xmit:
+ * 	synchronize_irq + netif_tx_disable;
+ * - tx_timeout:
+ * 	netif_device_detach + netif_tx_disable;
+ * - set_multicast_list
+ * 	netif_device_detach + netif_tx_disable;
+ * - interrupt handler
+ * 	doesn't touch hw if not present, synchronize_irq waits for
+ * 	running instances of the interrupt handler.
+ *
+ * Disabling hw requires clearing csr6 & IntrEnable.
+ * update_csr6 & all function that write IntrEnable check netif_device_present
+ * before settings any bits.
+ *
+ * Detach must occur under spin_unlock_irq(), interrupts from a detached
+ * device would cause an irq storm.
+ */
+static int w840_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = np->base_addr;
+
+	rtnl_lock();
+	if (netif_running (dev)) {
+		del_timer_sync(&np->timer);
+
+		spin_lock_irq(&np->lock);
+		netif_device_detach(dev);
+		update_csr6(dev, 0);
+		iowrite32(0, ioaddr + IntrEnable);
+		spin_unlock_irq(&np->lock);
+
+		synchronize_irq(dev->irq);
+		netif_tx_disable(dev);
+
+		np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
+
+		/* no more hardware accesses behind this line. */
+
+		BUG_ON(np->csr6 || ioread32(ioaddr + IntrEnable));
+
+		/* pci_power_off(pdev, -1); */
+
+		free_rxtx_rings(np);
+	} else {
+		netif_device_detach(dev);
+	}
+	rtnl_unlock();
+	return 0;
+}
+
+static int w840_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	int retval = 0;
+
+	rtnl_lock();
+	if (netif_device_present(dev))
+		goto out; /* device not suspended */
+	if (netif_running(dev)) {
+		if ((retval = pci_enable_device(pdev))) {
+			dev_err(&dev->dev,
+				"pci_enable_device failed in resume\n");
+			goto out;
+		}
+		spin_lock_irq(&np->lock);
+		iowrite32(1, np->base_addr+PCIBusCfg);
+		ioread32(np->base_addr+PCIBusCfg);
+		udelay(1);
+		netif_device_attach(dev);
+		init_rxtx_rings(dev);
+		init_registers(dev);
+		spin_unlock_irq(&np->lock);
+
+		netif_wake_queue(dev);
+
+		mod_timer(&np->timer, jiffies + 1*HZ);
+	} else {
+		netif_device_attach(dev);
+	}
+out:
+	rtnl_unlock();
+	return retval;
+}
+#endif
+
+static struct pci_driver w840_driver = {
+	.name		= DRV_NAME,
+	.id_table	= w840_pci_tbl,
+	.probe		= w840_probe1,
+	.remove		= __devexit_p(w840_remove1),
+#ifdef CONFIG_PM
+	.suspend	= w840_suspend,
+	.resume		= w840_resume,
+#endif
+};
+
+static int __init w840_init(void)
+{
+	printk(version);
+	return pci_register_driver(&w840_driver);
+}
+
+static void __exit w840_exit(void)
+{
+	pci_unregister_driver(&w840_driver);
+}
+
+module_init(w840_init);
+module_exit(w840_exit);
diff --git a/drivers/net/ethernet/dec/tulip/xircom_cb.c b/drivers/net/ethernet/dec/tulip/xircom_cb.c
new file mode 100644
index 000000000000..988b8eb24d37
--- /dev/null
+++ b/drivers/net/ethernet/dec/tulip/xircom_cb.c
@@ -0,0 +1,1154 @@
+/*
+ * xircom_cb: A driver for the (tulip-like) Xircom Cardbus ethernet cards
+ *
+ * This software is (C) by the respective authors, and licensed under the GPL
+ * License.
+ *
+ * Written by Arjan van de Ven for Red Hat, Inc.
+ * Based on work by Jeff Garzik, Doug Ledford and Donald Becker
+ *
+ *  	This software may be used and distributed according to the terms
+ *      of the GNU General Public License, incorporated herein by reference.
+ *
+ *
+ * 	$Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#ifdef CONFIG_NET_POLL_CONTROLLER
+#include <asm/irq.h>
+#endif
+
+MODULE_DESCRIPTION("Xircom Cardbus ethernet driver");
+MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>");
+MODULE_LICENSE("GPL");
+
+
+
+/* IO registers on the card, offsets */
+#define CSR0	0x00
+#define CSR1	0x08
+#define CSR2	0x10
+#define CSR3	0x18
+#define CSR4	0x20
+#define CSR5	0x28
+#define CSR6	0x30
+#define CSR7	0x38
+#define CSR8	0x40
+#define CSR9	0x48
+#define CSR10	0x50
+#define CSR11	0x58
+#define CSR12	0x60
+#define CSR13	0x68
+#define CSR14	0x70
+#define CSR15	0x78
+#define CSR16	0x80
+
+/* PCI registers */
+#define PCI_POWERMGMT 	0x40
+
+/* Offsets of the buffers within the descriptor pages, in bytes */
+
+#define NUMDESCRIPTORS 4
+
+static int bufferoffsets[NUMDESCRIPTORS] = {128,2048,4096,6144};
+
+
+struct xircom_private {
+	/* Send and receive buffers, kernel-addressable and dma addressable forms */
+
+	__le32 *rx_buffer;
+	__le32 *tx_buffer;
+
+	dma_addr_t rx_dma_handle;
+	dma_addr_t tx_dma_handle;
+
+	struct sk_buff *tx_skb[4];
+
+	unsigned long io_port;
+	int open;
+
+	/* transmit_used is the rotating counter that indicates which transmit
+	   descriptor has to be used next */
+	int transmit_used;
+
+	/* Spinlock to serialize register operations.
+	   It must be helt while manipulating the following registers:
+	   CSR0, CSR6, CSR7, CSR9, CSR10, CSR15
+	 */
+	spinlock_t lock;
+
+	struct pci_dev *pdev;
+	struct net_device *dev;
+};
+
+
+/* Function prototypes */
+static int xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id);
+static void xircom_remove(struct pci_dev *pdev);
+static irqreturn_t xircom_interrupt(int irq, void *dev_instance);
+static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
+					   struct net_device *dev);
+static int xircom_open(struct net_device *dev);
+static int xircom_close(struct net_device *dev);
+static void xircom_up(struct xircom_private *card);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void xircom_poll_controller(struct net_device *dev);
+#endif
+
+static void investigate_read_descriptor(struct net_device *dev,struct xircom_private *card, int descnr, unsigned int bufferoffset);
+static void investigate_write_descriptor(struct net_device *dev, struct xircom_private *card, int descnr, unsigned int bufferoffset);
+static void read_mac_address(struct xircom_private *card);
+static void transceiver_voodoo(struct xircom_private *card);
+static void initialize_card(struct xircom_private *card);
+static void trigger_transmit(struct xircom_private *card);
+static void trigger_receive(struct xircom_private *card);
+static void setup_descriptors(struct xircom_private *card);
+static void remove_descriptors(struct xircom_private *card);
+static int link_status_changed(struct xircom_private *card);
+static void activate_receiver(struct xircom_private *card);
+static void deactivate_receiver(struct xircom_private *card);
+static void activate_transmitter(struct xircom_private *card);
+static void deactivate_transmitter(struct xircom_private *card);
+static void enable_transmit_interrupt(struct xircom_private *card);
+static void enable_receive_interrupt(struct xircom_private *card);
+static void enable_link_interrupt(struct xircom_private *card);
+static void disable_all_interrupts(struct xircom_private *card);
+static int link_status(struct xircom_private *card);
+
+
+
+static DEFINE_PCI_DEVICE_TABLE(xircom_pci_table) = {
+	{0x115D, 0x0003, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,},
+};
+MODULE_DEVICE_TABLE(pci, xircom_pci_table);
+
+static struct pci_driver xircom_ops = {
+	.name		= "xircom_cb",
+	.id_table	= xircom_pci_table,
+	.probe		= xircom_probe,
+	.remove		= xircom_remove,
+	.suspend =NULL,
+	.resume =NULL
+};
+
+
+#if defined DEBUG && DEBUG > 1
+static void print_binary(unsigned int number)
+{
+	int i,i2;
+	char buffer[64];
+	memset(buffer,0,64);
+	i2=0;
+	for (i=31;i>=0;i--) {
+		if (number & (1<<i))
+			buffer[i2++]='1';
+		else
+			buffer[i2++]='0';
+		if ((i&3)==0)
+			buffer[i2++]=' ';
+	}
+	pr_debug("%s\n",buffer);
+}
+#endif
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= xircom_open,
+	.ndo_stop		= xircom_close,
+	.ndo_start_xmit		= xircom_start_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= xircom_poll_controller,
+#endif
+};
+
+/* xircom_probe is the code that gets called on device insertion.
+   it sets up the hardware and registers the device to the networklayer.
+
+   TODO: Send 1 or 2 "dummy" packets here as the card seems to discard the
+         first two packets that get send, and pump hates that.
+
+ */
+static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct net_device *dev = NULL;
+	struct xircom_private *private;
+	unsigned long flags;
+	unsigned short tmp16;
+
+	/* First do the PCI initialisation */
+
+	if (pci_enable_device(pdev))
+		return -ENODEV;
+
+	/* disable all powermanagement */
+	pci_write_config_dword(pdev, PCI_POWERMGMT, 0x0000);
+
+	pci_set_master(pdev); /* Why isn't this done by pci_enable_device ?*/
+
+	/* clear PCI status, if any */
+	pci_read_config_word (pdev,PCI_STATUS, &tmp16);
+	pci_write_config_word (pdev, PCI_STATUS,tmp16);
+
+	if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
+		pr_err("%s: failed to allocate io-region\n", __func__);
+		return -ENODEV;
+	}
+
+	/*
+	   Before changing the hardware, allocate the memory.
+	   This way, we can fail gracefully if not enough memory
+	   is available.
+	 */
+	dev = alloc_etherdev(sizeof(struct xircom_private));
+	if (!dev) {
+		pr_err("%s: failed to allocate etherdev\n", __func__);
+		goto device_fail;
+	}
+	private = netdev_priv(dev);
+
+	/* Allocate the send/receive buffers */
+	private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
+	if (private->rx_buffer == NULL) {
+		pr_err("%s: no memory for rx buffer\n", __func__);
+		goto rx_buf_fail;
+	}
+	private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
+	if (private->tx_buffer == NULL) {
+		pr_err("%s: no memory for tx buffer\n", __func__);
+		goto tx_buf_fail;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+
+	private->dev = dev;
+	private->pdev = pdev;
+	private->io_port = pci_resource_start(pdev, 0);
+	spin_lock_init(&private->lock);
+	dev->irq = pdev->irq;
+	dev->base_addr = private->io_port;
+
+	initialize_card(private);
+	read_mac_address(private);
+	setup_descriptors(private);
+
+	dev->netdev_ops = &netdev_ops;
+	pci_set_drvdata(pdev, dev);
+
+	if (register_netdev(dev)) {
+		pr_err("%s: netdevice registration failed\n", __func__);
+		goto reg_fail;
+	}
+
+	netdev_info(dev, "Xircom cardbus revision %i at irq %i\n",
+		    pdev->revision, pdev->irq);
+	/* start the transmitter to get a heartbeat */
+	/* TODO: send 2 dummy packets here */
+	transceiver_voodoo(private);
+
+	spin_lock_irqsave(&private->lock,flags);
+	activate_transmitter(private);
+	activate_receiver(private);
+	spin_unlock_irqrestore(&private->lock,flags);
+
+	trigger_receive(private);
+
+	return 0;
+
+reg_fail:
+	kfree(private->tx_buffer);
+tx_buf_fail:
+	kfree(private->rx_buffer);
+rx_buf_fail:
+	free_netdev(dev);
+device_fail:
+	return -ENODEV;
+}
+
+
+/*
+ xircom_remove is called on module-unload or on device-eject.
+ it unregisters the irq, io-region and network device.
+ Interrupts and such are already stopped in the "ifconfig ethX down"
+ code.
+ */
+static void __devexit xircom_remove(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct xircom_private *card = netdev_priv(dev);
+
+	pci_free_consistent(pdev,8192,card->rx_buffer,card->rx_dma_handle);
+	pci_free_consistent(pdev,8192,card->tx_buffer,card->tx_dma_handle);
+
+	release_region(dev->base_addr, 128);
+	unregister_netdev(dev);
+	free_netdev(dev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
+{
+	struct net_device *dev = (struct net_device *) dev_instance;
+	struct xircom_private *card = netdev_priv(dev);
+	unsigned int status;
+	int i;
+
+	spin_lock(&card->lock);
+	status = inl(card->io_port+CSR5);
+
+#if defined DEBUG && DEBUG > 1
+	print_binary(status);
+	pr_debug("tx status 0x%08x 0x%08x\n",
+		 card->tx_buffer[0], card->tx_buffer[4]);
+	pr_debug("rx status 0x%08x 0x%08x\n",
+		 card->rx_buffer[0], card->rx_buffer[4]);
+#endif
+	/* Handle shared irq and hotplug */
+	if (status == 0 || status == 0xffffffff) {
+		spin_unlock(&card->lock);
+		return IRQ_NONE;
+	}
+
+	if (link_status_changed(card)) {
+		int newlink;
+		netdev_dbg(dev, "Link status has changed\n");
+		newlink = link_status(card);
+		netdev_info(dev, "Link is %d mbit\n", newlink);
+		if (newlink)
+			netif_carrier_on(dev);
+		else
+			netif_carrier_off(dev);
+
+	}
+
+	/* Clear all remaining interrupts */
+	status |= 0xffffffff; /* FIXME: make this clear only the
+				        real existing bits */
+	outl(status,card->io_port+CSR5);
+
+
+	for (i=0;i<NUMDESCRIPTORS;i++)
+		investigate_write_descriptor(dev,card,i,bufferoffsets[i]);
+	for (i=0;i<NUMDESCRIPTORS;i++)
+		investigate_read_descriptor(dev,card,i,bufferoffsets[i]);
+
+	spin_unlock(&card->lock);
+	return IRQ_HANDLED;
+}
+
+static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,
+					   struct net_device *dev)
+{
+	struct xircom_private *card;
+	unsigned long flags;
+	int nextdescriptor;
+	int desc;
+
+	card = netdev_priv(dev);
+	spin_lock_irqsave(&card->lock,flags);
+
+	/* First see if we can free some descriptors */
+	for (desc=0;desc<NUMDESCRIPTORS;desc++)
+		investigate_write_descriptor(dev,card,desc,bufferoffsets[desc]);
+
+
+	nextdescriptor = (card->transmit_used +1) % (NUMDESCRIPTORS);
+	desc = card->transmit_used;
+
+	/* only send the packet if the descriptor is free */
+	if (card->tx_buffer[4*desc]==0) {
+			/* Copy the packet data; zero the memory first as the card
+			   sometimes sends more than you ask it to. */
+
+			memset(&card->tx_buffer[bufferoffsets[desc]/4],0,1536);
+			skb_copy_from_linear_data(skb,
+				  &(card->tx_buffer[bufferoffsets[desc] / 4]),
+						  skb->len);
+			/* FIXME: The specification tells us that the length we send HAS to be a multiple of
+			   4 bytes. */
+
+			card->tx_buffer[4*desc+1] = cpu_to_le32(skb->len);
+			if (desc == NUMDESCRIPTORS - 1) /* bit 25: last descriptor of the ring */
+				card->tx_buffer[4*desc+1] |= cpu_to_le32(1<<25);  
+
+			card->tx_buffer[4*desc+1] |= cpu_to_le32(0xF0000000);
+						 /* 0xF0... means want interrupts*/
+			card->tx_skb[desc] = skb;
+
+			wmb();
+			/* This gives the descriptor to the card */
+			card->tx_buffer[4*desc] = cpu_to_le32(0x80000000);
+			trigger_transmit(card);
+			if (card->tx_buffer[nextdescriptor*4] & cpu_to_le32(0x8000000)) {
+				/* next descriptor is occupied... */
+				netif_stop_queue(dev);
+			}
+			card->transmit_used = nextdescriptor;
+			spin_unlock_irqrestore(&card->lock,flags);
+			return NETDEV_TX_OK;
+	}
+
+	/* Uh oh... no free descriptor... drop the packet */
+	netif_stop_queue(dev);
+	spin_unlock_irqrestore(&card->lock,flags);
+	trigger_transmit(card);
+
+	return NETDEV_TX_BUSY;
+}
+
+
+
+
+static int xircom_open(struct net_device *dev)
+{
+	struct xircom_private *xp = netdev_priv(dev);
+	int retval;
+
+	netdev_info(dev, "xircom cardbus adaptor found, using irq %i\n",
+		    dev->irq);
+	retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
+	if (retval)
+		return retval;
+
+	xircom_up(xp);
+	xp->open = 1;
+
+	return 0;
+}
+
+static int xircom_close(struct net_device *dev)
+{
+	struct xircom_private *card;
+	unsigned long flags;
+
+	card = netdev_priv(dev);
+	netif_stop_queue(dev); /* we don't want new packets */
+
+
+	spin_lock_irqsave(&card->lock,flags);
+
+	disable_all_interrupts(card);
+#if 0
+	/* We can enable this again once we send dummy packets on ifconfig ethX up */
+	deactivate_receiver(card);
+	deactivate_transmitter(card);
+#endif
+	remove_descriptors(card);
+
+	spin_unlock_irqrestore(&card->lock,flags);
+
+	card->open = 0;
+	free_irq(dev->irq,dev);
+
+	return 0;
+
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void xircom_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	xircom_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+
+static void initialize_card(struct xircom_private *card)
+{
+	unsigned int val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->lock, flags);
+
+	/* First: reset the card */
+	val = inl(card->io_port + CSR0);
+	val |= 0x01;		/* Software reset */
+	outl(val, card->io_port + CSR0);
+
+	udelay(100);		/* give the card some time to reset */
+
+	val = inl(card->io_port + CSR0);
+	val &= ~0x01;		/* disable Software reset */
+	outl(val, card->io_port + CSR0);
+
+
+	val = 0;		/* Value 0x00 is a safe and conservative value
+				   for the PCI configuration settings */
+	outl(val, card->io_port + CSR0);
+
+
+	disable_all_interrupts(card);
+	deactivate_receiver(card);
+	deactivate_transmitter(card);
+
+	spin_unlock_irqrestore(&card->lock, flags);
+}
+
+/*
+trigger_transmit causes the card to check for frames to be transmitted.
+This is accomplished by writing to the CSR1 port. The documentation
+claims that the act of writing is sufficient and that the value is
+ignored; I chose zero.
+*/
+static void trigger_transmit(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = 0;
+	outl(val, card->io_port + CSR1);
+}
+
+/*
+trigger_receive causes the card to check for empty frames in the
+descriptor list in which packets can be received.
+This is accomplished by writing to the CSR2 port. The documentation
+claims that the act of writing is sufficient and that the value is
+ignored; I chose zero.
+*/
+static void trigger_receive(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = 0;
+	outl(val, card->io_port + CSR2);
+}
+
+/*
+setup_descriptors initializes the send and receive buffers to be valid
+descriptors and programs the addresses into the card.
+*/
+static void setup_descriptors(struct xircom_private *card)
+{
+	u32 address;
+	int i;
+
+	BUG_ON(card->rx_buffer == NULL);
+	BUG_ON(card->tx_buffer == NULL);
+
+	/* Receive descriptors */
+	memset(card->rx_buffer, 0, 128);	/* clear the descriptors */
+	for (i=0;i<NUMDESCRIPTORS;i++ ) {
+
+		/* Rx Descr0: It's empty, let the card own it, no errors -> 0x80000000 */
+		card->rx_buffer[i*4 + 0] = cpu_to_le32(0x80000000);
+		/* Rx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */
+		card->rx_buffer[i*4 + 1] = cpu_to_le32(1536);
+		if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */
+			card->rx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25);
+
+		/* Rx Descr2: address of the buffer
+		   we store the buffer at the 2nd half of the page */
+
+		address = card->rx_dma_handle;
+		card->rx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
+		/* Rx Desc3: address of 2nd buffer -> 0 */
+		card->rx_buffer[i*4 + 3] = 0;
+	}
+
+	wmb();
+	/* Write the receive descriptor ring address to the card */
+	address = card->rx_dma_handle;
+	outl(address, card->io_port + CSR3);	/* Receive descr list address */
+
+
+	/* transmit descriptors */
+	memset(card->tx_buffer, 0, 128);	/* clear the descriptors */
+
+	for (i=0;i<NUMDESCRIPTORS;i++ ) {
+		/* Tx Descr0: Empty, we own it, no errors -> 0x00000000 */
+		card->tx_buffer[i*4 + 0] = 0x00000000;
+		/* Tx Descr1: buffer 1 is 1536 bytes, buffer 2 is 0 bytes */
+		card->tx_buffer[i*4 + 1] = cpu_to_le32(1536);
+		if (i == NUMDESCRIPTORS - 1) /* bit 25 is "last descriptor" */
+			card->tx_buffer[i*4 + 1] |= cpu_to_le32(1 << 25);
+
+		/* Tx Descr2: address of the buffer
+		   we store the buffer at the 2nd half of the page */
+		address = card->tx_dma_handle;
+		card->tx_buffer[i*4 + 2] = cpu_to_le32(address + bufferoffsets[i]);
+		/* Tx Desc3: address of 2nd buffer -> 0 */
+		card->tx_buffer[i*4 + 3] = 0;
+	}
+
+	wmb();
+	/* wite the transmit descriptor ring to the card */
+	address = card->tx_dma_handle;
+	outl(address, card->io_port + CSR4);	/* xmit descr list address */
+}
+
+/*
+remove_descriptors informs the card the descriptors are no longer
+valid by setting the address in the card to 0x00.
+*/
+static void remove_descriptors(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = 0;
+	outl(val, card->io_port + CSR3);	/* Receive descriptor address */
+	outl(val, card->io_port + CSR4);	/* Send descriptor address */
+}
+
+/*
+link_status_changed returns 1 if the card has indicated that
+the link status has changed. The new link status has to be read from CSR12.
+
+This function also clears the status-bit.
+*/
+static int link_status_changed(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR5);	/* Status register */
+
+	if ((val & (1 << 27)) == 0)		/* no change */
+		return 0;
+
+	/* clear the event by writing a 1 to the bit in the
+	   status register. */
+	val = (1 << 27);
+	outl(val, card->io_port + CSR5);
+
+	return 1;
+}
+
+
+/*
+transmit_active returns 1 if the transmitter on the card is
+in a non-stopped state.
+*/
+static int transmit_active(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR5);	/* Status register */
+
+	if ((val & (7 << 20)) == 0)		/* transmitter disabled */
+		return 0;
+
+	return 1;
+}
+
+/*
+receive_active returns 1 if the receiver on the card is
+in a non-stopped state.
+*/
+static int receive_active(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR5);	/* Status register */
+
+	if ((val & (7 << 17)) == 0)		/* receiver disabled */
+		return 0;
+
+	return 1;
+}
+
+/*
+activate_receiver enables the receiver on the card.
+Before being allowed to active the receiver, the receiver
+must be completely de-activated. To achieve this,
+this code actually disables the receiver first; then it waits for the
+receiver to become inactive, then it activates the receiver and then
+it waits for the receiver to be active.
+
+must be called with the lock held and interrupts disabled.
+*/
+static void activate_receiver(struct xircom_private *card)
+{
+	unsigned int val;
+	int counter;
+
+	val = inl(card->io_port + CSR6);	/* Operation mode */
+
+	/* If the "active" bit is set and the receiver is already
+	   active, no need to do the expensive thing */
+	if ((val&2) && (receive_active(card)))
+		return;
+
+
+	val = val & ~2;		/* disable the receiver */
+	outl(val, card->io_port + CSR6);
+
+	counter = 10;
+	while (counter > 0) {
+		if (!receive_active(card))
+			break;
+		/* wait a while */
+		udelay(50);
+		counter--;
+		if (counter <= 0)
+			netdev_err(card->dev, "Receiver failed to deactivate\n");
+	}
+
+	/* enable the receiver */
+	val = inl(card->io_port + CSR6);	/* Operation mode */
+	val = val | 2;				/* enable the receiver */
+	outl(val, card->io_port + CSR6);
+
+	/* now wait for the card to activate again */
+	counter = 10;
+	while (counter > 0) {
+		if (receive_active(card))
+			break;
+		/* wait a while */
+		udelay(50);
+		counter--;
+		if (counter <= 0)
+			netdev_err(card->dev,
+				   "Receiver failed to re-activate\n");
+	}
+}
+
+/*
+deactivate_receiver disables the receiver on the card.
+To achieve this this code disables the receiver first;
+then it waits for the receiver to become inactive.
+
+must be called with the lock held and interrupts disabled.
+*/
+static void deactivate_receiver(struct xircom_private *card)
+{
+	unsigned int val;
+	int counter;
+
+	val = inl(card->io_port + CSR6);	/* Operation mode */
+	val = val & ~2;				/* disable the receiver */
+	outl(val, card->io_port + CSR6);
+
+	counter = 10;
+	while (counter > 0) {
+		if (!receive_active(card))
+			break;
+		/* wait a while */
+		udelay(50);
+		counter--;
+		if (counter <= 0)
+			netdev_err(card->dev, "Receiver failed to deactivate\n");
+	}
+}
+
+
+/*
+activate_transmitter enables the transmitter on the card.
+Before being allowed to active the transmitter, the transmitter
+must be completely de-activated. To achieve this,
+this code actually disables the transmitter first; then it waits for the
+transmitter to become inactive, then it activates the transmitter and then
+it waits for the transmitter to be active again.
+
+must be called with the lock held and interrupts disabled.
+*/
+static void activate_transmitter(struct xircom_private *card)
+{
+	unsigned int val;
+	int counter;
+
+	val = inl(card->io_port + CSR6);	/* Operation mode */
+
+	/* If the "active" bit is set and the receiver is already
+	   active, no need to do the expensive thing */
+	if ((val&(1<<13)) && (transmit_active(card)))
+		return;
+
+	val = val & ~(1 << 13);	/* disable the transmitter */
+	outl(val, card->io_port + CSR6);
+
+	counter = 10;
+	while (counter > 0) {
+		if (!transmit_active(card))
+			break;
+		/* wait a while */
+		udelay(50);
+		counter--;
+		if (counter <= 0)
+			netdev_err(card->dev,
+				   "Transmitter failed to deactivate\n");
+	}
+
+	/* enable the transmitter */
+	val = inl(card->io_port + CSR6);	/* Operation mode */
+	val = val | (1 << 13);	/* enable the transmitter */
+	outl(val, card->io_port + CSR6);
+
+	/* now wait for the card to activate again */
+	counter = 10;
+	while (counter > 0) {
+		if (transmit_active(card))
+			break;
+		/* wait a while */
+		udelay(50);
+		counter--;
+		if (counter <= 0)
+			netdev_err(card->dev,
+				   "Transmitter failed to re-activate\n");
+	}
+}
+
+/*
+deactivate_transmitter disables the transmitter on the card.
+To achieve this this code disables the transmitter first;
+then it waits for the transmitter to become inactive.
+
+must be called with the lock held and interrupts disabled.
+*/
+static void deactivate_transmitter(struct xircom_private *card)
+{
+	unsigned int val;
+	int counter;
+
+	val = inl(card->io_port + CSR6);	/* Operation mode */
+	val = val & ~2;		/* disable the transmitter */
+	outl(val, card->io_port + CSR6);
+
+	counter = 20;
+	while (counter > 0) {
+		if (!transmit_active(card))
+			break;
+		/* wait a while */
+		udelay(50);
+		counter--;
+		if (counter <= 0)
+			netdev_err(card->dev,
+				   "Transmitter failed to deactivate\n");
+	}
+}
+
+
+/*
+enable_transmit_interrupt enables the transmit interrupt
+
+must be called with the lock held and interrupts disabled.
+*/
+static void enable_transmit_interrupt(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
+	val |= 1;				/* enable the transmit interrupt */
+	outl(val, card->io_port + CSR7);
+}
+
+
+/*
+enable_receive_interrupt enables the receive interrupt
+
+must be called with the lock held and interrupts disabled.
+*/
+static void enable_receive_interrupt(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
+	val = val | (1 << 6);			/* enable the receive interrupt */
+	outl(val, card->io_port + CSR7);
+}
+
+/*
+enable_link_interrupt enables the link status change interrupt
+
+must be called with the lock held and interrupts disabled.
+*/
+static void enable_link_interrupt(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
+	val = val | (1 << 27);			/* enable the link status chage interrupt */
+	outl(val, card->io_port + CSR7);
+}
+
+
+
+/*
+disable_all_interrupts disables all interrupts
+
+must be called with the lock held and interrupts disabled.
+*/
+static void disable_all_interrupts(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = 0;				/* disable all interrupts */
+	outl(val, card->io_port + CSR7);
+}
+
+/*
+enable_common_interrupts enables several weird interrupts
+
+must be called with the lock held and interrupts disabled.
+*/
+static void enable_common_interrupts(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR7);	/* Interrupt enable register */
+	val |= (1<<16); /* Normal Interrupt Summary */
+	val |= (1<<15); /* Abnormal Interrupt Summary */
+	val |= (1<<13); /* Fatal bus error */
+	val |= (1<<8);  /* Receive Process Stopped */
+	val |= (1<<7);  /* Receive Buffer Unavailable */
+	val |= (1<<5);  /* Transmit Underflow */
+	val |= (1<<2);  /* Transmit Buffer Unavailable */
+	val |= (1<<1);  /* Transmit Process Stopped */
+	outl(val, card->io_port + CSR7);
+}
+
+/*
+enable_promisc starts promisc mode
+
+must be called with the lock held and interrupts disabled.
+*/
+static int enable_promisc(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inl(card->io_port + CSR6);
+	val = val | (1 << 6);
+	outl(val, card->io_port + CSR6);
+
+	return 1;
+}
+
+
+
+
+/*
+link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what.
+
+Must be called in locked state with interrupts disabled
+*/
+static int link_status(struct xircom_private *card)
+{
+	unsigned int val;
+
+	val = inb(card->io_port + CSR12);
+
+	if (!(val&(1<<2)))  /* bit 2 is 0 for 10mbit link, 1 for not an 10mbit link */
+		return 10;
+	if (!(val&(1<<1)))  /* bit 1 is 0 for 100mbit link, 1 for not an 100mbit link */
+		return 100;
+
+	/* If we get here -> no link at all */
+
+	return 0;
+}
+
+
+
+
+
+/*
+  read_mac_address() reads the MAC address from the NIC and stores it in the "dev" structure.
+
+  This function will take the spinlock itself and can, as a result, not be called with the lock helt.
+ */
+static void read_mac_address(struct xircom_private *card)
+{
+	unsigned char j, tuple, link, data_id, data_count;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&card->lock, flags);
+
+	outl(1 << 12, card->io_port + CSR9);	/* enable boot rom access */
+	for (i = 0x100; i < 0x1f7; i += link + 2) {
+		outl(i, card->io_port + CSR10);
+		tuple = inl(card->io_port + CSR9) & 0xff;
+		outl(i + 1, card->io_port + CSR10);
+		link = inl(card->io_port + CSR9) & 0xff;
+		outl(i + 2, card->io_port + CSR10);
+		data_id = inl(card->io_port + CSR9) & 0xff;
+		outl(i + 3, card->io_port + CSR10);
+		data_count = inl(card->io_port + CSR9) & 0xff;
+		if ((tuple == 0x22) && (data_id == 0x04) && (data_count == 0x06)) {
+			/*
+			 * This is it.  We have the data we want.
+			 */
+			for (j = 0; j < 6; j++) {
+				outl(i + j + 4, card->io_port + CSR10);
+				card->dev->dev_addr[j] = inl(card->io_port + CSR9) & 0xff;
+			}
+			break;
+		} else if (link == 0) {
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&card->lock, flags);
+	pr_debug(" %pM\n", card->dev->dev_addr);
+}
+
+
+/*
+ transceiver_voodoo() enables the external UTP plug thingy.
+ it's called voodoo as I stole this code and cannot cross-reference
+ it with the specification.
+ */
+static void transceiver_voodoo(struct xircom_private *card)
+{
+	unsigned long flags;
+
+	/* disable all powermanagement */
+	pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
+
+	setup_descriptors(card);
+
+	spin_lock_irqsave(&card->lock, flags);
+
+	outl(0x0008, card->io_port + CSR15);
+        udelay(25);
+        outl(0xa8050000, card->io_port + CSR15);
+        udelay(25);
+        outl(0xa00f0000, card->io_port + CSR15);
+        udelay(25);
+
+        spin_unlock_irqrestore(&card->lock, flags);
+
+	netif_start_queue(card->dev);
+}
+
+
+static void xircom_up(struct xircom_private *card)
+{
+	unsigned long flags;
+	int i;
+
+	/* disable all powermanagement */
+	pci_write_config_dword(card->pdev, PCI_POWERMGMT, 0x0000);
+
+	setup_descriptors(card);
+
+	spin_lock_irqsave(&card->lock, flags);
+
+
+	enable_link_interrupt(card);
+	enable_transmit_interrupt(card);
+	enable_receive_interrupt(card);
+	enable_common_interrupts(card);
+	enable_promisc(card);
+
+	/* The card can have received packets already, read them away now */
+	for (i=0;i<NUMDESCRIPTORS;i++)
+		investigate_read_descriptor(card->dev,card,i,bufferoffsets[i]);
+
+
+	spin_unlock_irqrestore(&card->lock, flags);
+	trigger_receive(card);
+	trigger_transmit(card);
+	netif_start_queue(card->dev);
+}
+
+/* Bufferoffset is in BYTES */
+static void
+investigate_read_descriptor(struct net_device *dev, struct xircom_private *card,
+			    int descnr, unsigned int bufferoffset)
+{
+	int status;
+
+	status = le32_to_cpu(card->rx_buffer[4*descnr]);
+
+	if (status > 0) {		/* packet received */
+
+		/* TODO: discard error packets */
+
+		short pkt_len = ((status >> 16) & 0x7ff) - 4;
+					/* minus 4, we don't want the CRC */
+		struct sk_buff *skb;
+
+		if (pkt_len > 1518) {
+			netdev_err(dev, "Packet length %i is bogus\n", pkt_len);
+			pkt_len = 1518;
+		}
+
+		skb = dev_alloc_skb(pkt_len + 2);
+		if (skb == NULL) {
+			dev->stats.rx_dropped++;
+			goto out;
+		}
+		skb_reserve(skb, 2);
+		skb_copy_to_linear_data(skb,
+					&card->rx_buffer[bufferoffset / 4],
+					pkt_len);
+		skb_put(skb, pkt_len);
+		skb->protocol = eth_type_trans(skb, dev);
+		netif_rx(skb);
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += pkt_len;
+
+out:
+		/* give the buffer back to the card */
+		card->rx_buffer[4*descnr] = cpu_to_le32(0x80000000);
+		trigger_receive(card);
+	}
+}
+
+
+/* Bufferoffset is in BYTES */
+static void
+investigate_write_descriptor(struct net_device *dev,
+			     struct xircom_private *card,
+			     int descnr, unsigned int bufferoffset)
+{
+	int status;
+
+	status = le32_to_cpu(card->tx_buffer[4*descnr]);
+#if 0
+	if (status & 0x8000) {	/* Major error */
+		pr_err("Major transmit error status %x\n", status);
+		card->tx_buffer[4*descnr] = 0;
+		netif_wake_queue (dev);
+	}
+#endif
+	if (status > 0) {	/* bit 31 is 0 when done */
+		if (card->tx_skb[descnr]!=NULL) {
+			dev->stats.tx_bytes += card->tx_skb[descnr]->len;
+			dev_kfree_skb_irq(card->tx_skb[descnr]);
+		}
+		card->tx_skb[descnr] = NULL;
+		/* Bit 8 in the status field is 1 if there was a collision */
+		if (status & (1 << 8))
+			dev->stats.collisions++;
+		card->tx_buffer[4*descnr] = 0; /* descriptor is free again */
+		netif_wake_queue (dev);
+		dev->stats.tx_packets++;
+	}
+}
+
+static int __init xircom_init(void)
+{
+	return pci_register_driver(&xircom_ops);
+}
+
+static void __exit xircom_exit(void)
+{
+	pci_unregister_driver(&xircom_ops);
+}
+
+module_init(xircom_init)
+module_exit(xircom_exit)
+