diff options
author | David S. Miller <davem@davemloft.net> | 2011-08-20 10:39:12 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2011-08-20 10:39:12 -0700 |
commit | 823dcd2506fa369aeb8cbd26da5663efe2fda9a9 (patch) | |
tree | 853b3e3c05f0b9ee1b5df8464db19b7acc57150c /drivers/net/ethernet/broadcom | |
parent | eaa36660de7e174498618d69d7277d44a2f24c3d (diff) | |
parent | 98e77438aed3cd3343cbb86825127b1d9d2bea33 (diff) | |
download | blackbird-op-linux-823dcd2506fa369aeb8cbd26da5663efe2fda9a9.tar.gz blackbird-op-linux-823dcd2506fa369aeb8cbd26da5663efe2fda9a9.zip |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net
Diffstat (limited to 'drivers/net/ethernet/broadcom')
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 35 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 23 | ||||
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 26 |
4 files changed, 69 insertions, 17 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 23b37dd79df3..93bff08c87ad 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -65,8 +65,9 @@ static inline void bnx2x_bz_fp(struct bnx2x *bp, int index) fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0); #ifdef BCM_CNIC - /* We don't want TPA on FCoE, FWD and OOO L2 rings */ - bnx2x_fcoe(bp, disable_tpa) = 1; + /* We don't want TPA on an FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + fp->disable_tpa = 1; #endif } @@ -1410,10 +1411,9 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) { struct bnx2x *bp = netdev_priv(dev); + #ifdef BCM_CNIC - if (NO_FCOE(bp)) - return skb_tx_hash(dev, skb); - else { + if (!NO_FCOE(bp)) { struct ethhdr *hdr = (struct ethhdr *)skb->data; u16 ether_type = ntohs(hdr->h_proto); @@ -1430,8 +1430,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) return bnx2x_fcoe_tx(bp, txq_index); } #endif - /* Select a none-FCoE queue: if FCoE is enabled, exclude FCoE L2 ring - */ + /* select a non-FCoE queue */ return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp)); } @@ -1454,6 +1453,28 @@ void bnx2x_set_num_queues(struct bnx2x *bp) bp->num_queues += NON_ETH_CONTEXT_USE; } +/** + * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues + * + * @bp: Driver handle + * + * We currently support for at most 16 Tx queues for each CoS thus we will + * allocate a multiple of 16 for ETH L2 rings according to the value of the + * bp->max_cos. + * + * If there is an FCoE L2 queue the appropriate Tx queue will have the next + * index after all ETH L2 indices. + * + * If the actual number of Tx queues (for each CoS) is less than 16 then there + * will be the holes at the end of each group of 16 ETh L2 indices (0..15, + * 16..31,...) with indicies that are not coupled with any real Tx queue. + * + * The proper configuration of skb->queue_mapping is handled by + * bnx2x_select_queue() and __skb_tx_hash(). + * + * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash() + * will return a proper Tx index if TC is enabled (netdev->num_tc > 0). + */ static inline int bnx2x_set_real_num_queues(struct bnx2x *bp) { int rc, tx, rx; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 9525b936cf62..0b9bd551580b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -923,7 +923,7 @@ static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp, void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled) { - if (!CHIP_IS_E1x(bp)) { + if (!CHIP_IS_E1x(bp) && !CHIP_IS_E3(bp)) { bp->dcb_state = dcb_on; bp->dcbx_enabled = dcbx_enabled; } else { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index f4ab90c20891..720478993950 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -5794,6 +5794,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_ABS_FUNC(bp)); + /* + * take the UNDI lock to protect undi_unload flow from accessing + * registers while we're resetting the chip + */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); @@ -5804,6 +5810,8 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) } REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); if (!CHIP_IS_E1x(bp)) { @@ -10245,10 +10253,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, /* clean indirect addresses */ pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0 + BP_PORT(bp)*16, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0 + BP_PORT(bp)*16, 0); + /* Clean the following indirect addresses for all functions since it + * is not used by the driver. + */ + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); /* * Enable internal target-read (in case we are probed after PF FLR). diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 27b5ecb11830..40266c14e6dc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -3007,11 +3007,27 @@ /* [R 6] Debug only: Number of used entries in the data FIFO */ #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c /* [R 7] Debug only: Number of used entries in the header FIFO */ -#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 -#define PXP2_REG_PGL_ADDR_88_F0 0x120534 -#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 -#define PXP2_REG_PGL_ADDR_90_F0 0x12053c -#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478 +#define PXP2_REG_PGL_ADDR_88_F0 0x120534 +/* [R 32] GRC address for configuration access to PCIE config address 0x88. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_88_F1 0x120544 +#define PXP2_REG_PGL_ADDR_8C_F0 0x120538 +/* [R 32] GRC address for configuration access to PCIE config address 0x8c. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_8C_F1 0x120548 +#define PXP2_REG_PGL_ADDR_90_F0 0x12053c +/* [R 32] GRC address for configuration access to PCIE config address 0x90. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_90_F1 0x12054c +#define PXP2_REG_PGL_ADDR_94_F0 0x120540 +/* [R 32] GRC address for configuration access to PCIE config address 0x94. + * any write to this PCIE address will cause a GRC write access to the + * address that's in t this register */ +#define PXP2_REG_PGL_ADDR_94_F1 0x120550 #define PXP2_REG_PGL_CONTROL0 0x120490 #define PXP2_REG_PGL_CONTROL1 0x120514 #define PXP2_REG_PGL_DEBUG 0x120520 |