[PATCH] e1000: Fix collision distance

Fixed the collision distance for 82543 controllers and newer.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

3 files changed, 29 insertions, 13 deletions

diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index f79d2a06ee7f..ac227c7847ff 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -1933,14 +1933,19 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 void
 e1000_config_collision_dist(struct e1000_hw *hw)
 {
-    uint32_t tctl;
+    uint32_t tctl, coll_dist;
 
     DEBUGFUNC("e1000_config_collision_dist");
 
+    if (hw->mac_type < e1000_82543)
+        coll_dist = E1000_COLLISION_DISTANCE_82542;
+    else
+        coll_dist = E1000_COLLISION_DISTANCE;
+
     tctl = E1000_READ_REG(hw, TCTL);
 
     tctl &= ~E1000_TCTL_COLD;
-    tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+    tctl |= coll_dist << E1000_COLD_SHIFT;
 
     E1000_WRITE_REG(hw, TCTL, tctl);
     E1000_WRITE_FLUSH(hw);
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 1ddfd56fc5df..600570ff254b 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -2078,7 +2078,10 @@ struct e1000_host_command_info {
 /* Collision related configuration parameters */
 #define E1000_COLLISION_THRESHOLD       15
 #define E1000_CT_SHIFT                  4
-#define E1000_COLLISION_DISTANCE        64
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE        63
+#define E1000_COLLISION_DISTANCE_82542  64
 #define E1000_FDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
 #define E1000_HDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
 #define E1000_COLD_SHIFT                12
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index d2e77ee103bb..36b04d42252f 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1342,6 +1342,7 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 	uint64_t tdba;
 	struct e1000_hw *hw = &adapter->hw;
 	uint32_t tdlen, tctl, tipg, tarc;
+	uint32_t ipgr1, ipgr2;
 
 	/* Setup the HW Tx Head and Tail descriptor pointers */
 
@@ -1375,22 +1376,26 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 
 	/* Set the default values for the Tx Inter Packet Gap timer */
 
+	if (hw->media_type == e1000_media_type_fiber ||
+	    hw->media_type == e1000_media_type_internal_serdes)
+		tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+	else
+		tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
 	switch (hw->mac_type) {
 	case e1000_82542_rev2_0:
 	case e1000_82542_rev2_1:
 		tipg = DEFAULT_82542_TIPG_IPGT;
-		tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-		tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+		ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+		ipgr2 = DEFAULT_82542_TIPG_IPGR2;
 		break;
 	default:
-		if (hw->media_type == e1000_media_type_fiber ||
-		    hw->media_type == e1000_media_type_internal_serdes)
-			tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
-		else
-			tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-		tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-		tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+		ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+		ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+		break;
 	}
+	tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+	tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
 	E1000_WRITE_REG(hw, TIPG, tipg);
 
 	/* Set the Tx Interrupt Delay register */
@@ -1600,7 +1605,10 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
 		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
 		(adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
 
-	if(adapter->hw.tbi_compatibility_on == 1)
+	if (adapter->hw.mac_type > e1000_82543)
+		rctl |= E1000_RCTL_SECRC;
+
+	if (adapter->hw.tbi_compatibility_on == 1)
 		rctl |= E1000_RCTL_SBP;
 	else
 		rctl &= ~E1000_RCTL_SBP;