DSA: Convert DSA comments to network-style comments

Convert DSA driver comments to network-style comments as reported by
checkpatch.pl.  Fix spelling error.

Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 30 insertions, 72 deletions

diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 55888b06d8b4..b61381887587 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -15,9 +15,7 @@
 #include <net/dsa.h>
 #include "mv88e6xxx.h"
 
-/*
- * Switch product IDs
- */
+/* Switch product IDs */
 #define ID_6085		0x04a0
 #define ID_6095		0x0950
 #define ID_6131		0x1060
@@ -45,27 +43,19 @@ static int mv88e6131_switch_reset(struct dsa_switch *ds)
 	int i;
 	int ret;
 
-	/*
-	 * Set all ports to the disabled state.
-	 */
+	/* Set all ports to the disabled state. */
 	for (i = 0; i < 11; i++) {
 		ret = REG_READ(REG_PORT(i), 0x04);
 		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
 	}
 
-	/*
-	 * Wait for transmit queues to drain.
-	 */
+	/* Wait for transmit queues to drain. */
 	msleep(2);
 
-	/*
-	 * Reset the switch.
-	 */
+	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
 
-	/*
-	 * Wait up to one second for reset to complete.
-	 */
+	/* Wait up to one second for reset to complete. */
 	for (i = 0; i < 1000; i++) {
 		ret = REG_READ(REG_GLOBAL, 0x00);
 		if ((ret & 0xc800) == 0xc800)
@@ -84,42 +74,34 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
 	int ret;
 	int i;
 
-	/*
-	 * Enable the PHY polling unit, don't discard packets with
+	/* Enable the PHY polling unit, don't discard packets with
 	 * excessive collisions, use a weighted fair queueing scheme
 	 * to arbitrate between packet queues, set the maximum frame
 	 * size to 1632, and mask all interrupt sources.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
 
-	/*
-	 * Set the default address aging time to 5 minutes, and
+	/* Set the default address aging time to 5 minutes, and
 	 * enable address learn messages to be sent to all message
 	 * ports.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
 
-	/*
-	 * Configure the priority mapping registers.
-	 */
+	/* Configure the priority mapping registers. */
 	ret = mv88e6xxx_config_prio(ds);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Set the VLAN ethertype to 0x8100.
-	 */
+	/* Set the VLAN ethertype to 0x8100. */
 	REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
 
-	/*
-	 * Disable ARP mirroring, and configure the upstream port as
+	/* Disable ARP mirroring, and configure the upstream port as
 	 * the port to which ingress and egress monitor frames are to
 	 * be sent.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
 
-	/*
-	 * Disable cascade port functionality unless this device
+	/* Disable cascade port functionality unless this device
 	 * is used in a cascade configuration, and set the switch's
 	 * DSA device number.
 	 */
@@ -128,23 +110,19 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
 	else
 		REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
 
-	/*
-	 * Send all frames with destination addresses matching
+	/* Send all frames with destination addresses matching
 	 * 01:80:c2:00:00:0x to the CPU port.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
 
-	/*
-	 * Ignore removed tag data on doubly tagged packets, disable
+	/* Ignore removed tag data on doubly tagged packets, disable
 	 * flow control messages, force flow control priority to the
 	 * highest, and send all special multicast frames to the CPU
 	 * port at the highest priority.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
 
-	/*
-	 * Program the DSA routing table.
-	 */
+	/* Program the DSA routing table. */
 	for (i = 0; i < 32; i++) {
 		int nexthop;
 
@@ -155,20 +133,15 @@ static int mv88e6131_setup_global(struct dsa_switch *ds)
 		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
 	}
 
-	/*
-	 * Clear all trunk masks.
-	 */
+	/* Clear all trunk masks. */
 	for (i = 0; i < 8; i++)
 		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
 
-	/*
-	 * Clear all trunk mappings.
-	 */
+	/* Clear all trunk mappings. */
 	for (i = 0; i < 16; i++)
 		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
 
-	/*
-	 * Force the priority of IGMP/MLD snoop frames and ARP frames
+	/* Force the priority of IGMP/MLD snoop frames and ARP frames
 	 * to the highest setting.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
@@ -182,8 +155,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	int addr = REG_PORT(p);
 	u16 val;
 
-	/*
-	 * MAC Forcing register: don't force link, speed, duplex
+	/* MAC Forcing register: don't force link, speed, duplex
 	 * or flow control state to any particular values on physical
 	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
 	 * (100 Mb/s on 6085) full duplex.
@@ -196,8 +168,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	else
 		REG_WRITE(addr, 0x01, 0x0003);
 
-	/*
-	 * Port Control: disable Core Tag, disable Drop-on-Lock,
+	/* Port Control: disable Core Tag, disable Drop-on-Lock,
 	 * transmit frames unmodified, disable Header mode,
 	 * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
 	 * tunneling, determine priority by looking at 802.1p and
@@ -214,8 +185,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	val = 0x0433;
 	if (p == dsa_upstream_port(ds)) {
 		val |= 0x0104;
-		/*
-		 * On 6085, unknown multicast forward is controlled
+		/* On 6085, unknown multicast forward is controlled
 		 * here rather than in Port Control 2 register.
 		 */
 		if (ps->id == ID_6085)
@@ -225,14 +195,12 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 		val |= 0x0100;
 	REG_WRITE(addr, 0x04, val);
 
-	/*
-	 * Port Control 1: disable trunking.  Also, if this is the
+	/* Port Control 1: disable trunking.  Also, if this is the
 	 * CPU port, enable learn messages to be sent to this port.
 	 */
 	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
 
-	/*
-	 * Port based VLAN map: give each port its own address
+	/* Port based VLAN map: give each port its own address
 	 * database, allow the CPU port to talk to each of the 'real'
 	 * ports, and allow each of the 'real' ports to only talk to
 	 * the upstream port.
@@ -244,14 +212,12 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 		val |= 1 << dsa_upstream_port(ds);
 	REG_WRITE(addr, 0x06, val);
 
-	/*
-	 * Default VLAN ID and priority: don't set a default VLAN
+	/* Default VLAN ID and priority: don't set a default VLAN
 	 * ID, and set the default packet priority to zero.
 	 */
 	REG_WRITE(addr, 0x07, 0x0000);
 
-	/*
-	 * Port Control 2: don't force a good FCS, don't use
+	/* Port Control 2: don't force a good FCS, don't use
 	 * VLAN-based, source address-based or destination
 	 * address-based priority overrides, don't let the switch
 	 * add or strip 802.1q tags, don't discard tagged or
@@ -264,8 +230,7 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 	 * forwarding of unknown multicast addresses.
 	 */
 	if (ps->id == ID_6085)
-		/*
-		 * on 6085, bits 3:0 are reserved, bit 6 control ARP
+		/* on 6085, bits 3:0 are reserved, bit 6 control ARP
 		 * mirroring, and multicast forward is handled in
 		 * Port Control register.
 		 */
@@ -277,32 +242,25 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 		REG_WRITE(addr, 0x08, val);
 	}
 
-	/*
-	 * Rate Control: disable ingress rate limiting.
-	 */
+	/* Rate Control: disable ingress rate limiting. */
 	REG_WRITE(addr, 0x09, 0x0000);
 
-	/*
-	 * Rate Control 2: disable egress rate limiting.
-	 */
+	/* Rate Control 2: disable egress rate limiting. */
 	REG_WRITE(addr, 0x0a, 0x0000);
 
-	/*
-	 * Port Association Vector: when learning source addresses
+	/* Port Association Vector: when learning source addresses
 	 * of packets, add the address to the address database using
 	 * a port bitmap that has only the bit for this port set and
 	 * the other bits clear.
 	 */
 	REG_WRITE(addr, 0x0b, 1 << p);
 
-	/*
-	 * Tag Remap: use an identity 802.1p prio -> switch prio
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
 	 * mapping.
 	 */
 	REG_WRITE(addr, 0x18, 0x3210);
 
-	/*
-	 * Tag Remap 2: use an identity 802.1p prio -> switch prio
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
 	 * mapping.
 	 */
 	REG_WRITE(addr, 0x19, 0x7654);