summaryrefslogtreecommitdiffstats
path: root/drivers/net/chelsio/vsc7326_reg.h
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@osdl.org>2006-12-01 16:36:16 -0800
committerJeff Garzik <jeff@garzik.org>2006-12-02 00:24:49 -0500
commitf1d3d38af75789f1b82969b83b69cab540609789 (patch)
tree47d31e8a55fb65cf33797197b92a332630cfc3ef /drivers/net/chelsio/vsc7326_reg.h
parent415294ecbb32ddbd0a7a2b7bae0b60fedfa09cc4 (diff)
downloadblackbird-op-linux-f1d3d38af75789f1b82969b83b69cab540609789.tar.gz
blackbird-op-linux-f1d3d38af75789f1b82969b83b69cab540609789.zip
[PATCH] chelsio: add support for other 10G boards
Add support for other versions of the 10G Chelsio boards. This is basically a port of the vendor driver with the TOE features removed. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/chelsio/vsc7326_reg.h')
-rw-r--r--drivers/net/chelsio/vsc7326_reg.h286
1 files changed, 286 insertions, 0 deletions
diff --git a/drivers/net/chelsio/vsc7326_reg.h b/drivers/net/chelsio/vsc7326_reg.h
new file mode 100644
index 000000000000..491bcf75c4fb
--- /dev/null
+++ b/drivers/net/chelsio/vsc7326_reg.h
@@ -0,0 +1,286 @@
+/* $Date: 2006/04/28 19:20:17 $ $RCSfile: vsc7326_reg.h,v $ $Revision: 1.5 $ */
+#ifndef _VSC7321_REG_H_
+#define _VSC7321_REG_H_
+
+/* Register definitions for Vitesse VSC7321 (Meigs II) MAC
+ *
+ * Straight off the data sheet, VMDS-10038 Rev 2.0 and
+ * PD0011-01-14-Meigs-II 2002-12-12
+ */
+
+/* Just 'cause it's in here doesn't mean it's used. */
+
+#define CRA(blk,sub,adr) ((((blk) & 0x7) << 13) | (((sub) & 0xf) << 9) | (((adr) & 0xff) << 1))
+
+/* System and CPU comm's registers */
+#define REG_CHIP_ID CRA(0x7,0xf,0x00) /* Chip ID */
+#define REG_BLADE_ID CRA(0x7,0xf,0x01) /* Blade ID */
+#define REG_SW_RESET CRA(0x7,0xf,0x02) /* Global Soft Reset */
+#define REG_MEM_BIST CRA(0x7,0xf,0x04) /* mem */
+#define REG_IFACE_MODE CRA(0x7,0xf,0x07) /* Interface mode */
+#define REG_MSCH CRA(0x7,0x2,0x06) /* CRC error count */
+#define REG_CRC_CNT CRA(0x7,0x2,0x0a) /* CRC error count */
+#define REG_CRC_CFG CRA(0x7,0x2,0x0b) /* CRC config */
+#define REG_SI_TRANSFER_SEL CRA(0x7,0xf,0x18) /* SI Transfer Select */
+#define REG_PLL_CLK_SPEED CRA(0x7,0xf,0x19) /* Clock Speed Selection */
+#define REG_SYS_CLK_SELECT CRA(0x7,0xf,0x1c) /* System Clock Select */
+#define REG_GPIO_CTRL CRA(0x7,0xf,0x1d) /* GPIO Control */
+#define REG_GPIO_OUT CRA(0x7,0xf,0x1e) /* GPIO Out */
+#define REG_GPIO_IN CRA(0x7,0xf,0x1f) /* GPIO In */
+#define REG_CPU_TRANSFER_SEL CRA(0x7,0xf,0x20) /* CPU Transfer Select */
+#define REG_LOCAL_DATA CRA(0x7,0xf,0xfe) /* Local CPU Data Register */
+#define REG_LOCAL_STATUS CRA(0x7,0xf,0xff) /* Local CPU Status Register */
+
+/* Aggregator registers */
+#define REG_AGGR_SETUP CRA(0x7,0x1,0x00) /* Aggregator Setup */
+#define REG_PMAP_TABLE CRA(0x7,0x1,0x01) /* Port map table */
+#define REG_MPLS_BIT0 CRA(0x7,0x1,0x08) /* MPLS bit0 position */
+#define REG_MPLS_BIT1 CRA(0x7,0x1,0x09) /* MPLS bit1 position */
+#define REG_MPLS_BIT2 CRA(0x7,0x1,0x0a) /* MPLS bit2 position */
+#define REG_MPLS_BIT3 CRA(0x7,0x1,0x0b) /* MPLS bit3 position */
+#define REG_MPLS_BITMASK CRA(0x7,0x1,0x0c) /* MPLS bit mask */
+#define REG_PRE_BIT0POS CRA(0x7,0x1,0x10) /* Preamble bit0 position */
+#define REG_PRE_BIT1POS CRA(0x7,0x1,0x11) /* Preamble bit1 position */
+#define REG_PRE_BIT2POS CRA(0x7,0x1,0x12) /* Preamble bit2 position */
+#define REG_PRE_BIT3POS CRA(0x7,0x1,0x13) /* Preamble bit3 position */
+#define REG_PRE_ERR_CNT CRA(0x7,0x1,0x14) /* Preamble parity error count */
+
+/* BIST registers */
+/*#define REG_RAM_BIST_CMD CRA(0x7,0x2,0x00)*/ /* RAM BIST Command Register */
+/*#define REG_RAM_BIST_RESULT CRA(0x7,0x2,0x01)*/ /* RAM BIST Read Status/Result */
+#define REG_RAM_BIST_CMD CRA(0x7,0x1,0x00) /* RAM BIST Command Register */
+#define REG_RAM_BIST_RESULT CRA(0x7,0x1,0x01) /* RAM BIST Read Status/Result */
+#define BIST_PORT_SELECT 0x00 /* BIST port select */
+#define BIST_COMMAND 0x01 /* BIST enable/disable */
+#define BIST_STATUS 0x02 /* BIST operation status */
+#define BIST_ERR_CNT_LSB 0x03 /* BIST error count lo 8b */
+#define BIST_ERR_CNT_MSB 0x04 /* BIST error count hi 8b */
+#define BIST_ERR_SEL_LSB 0x05 /* BIST error select lo 8b */
+#define BIST_ERR_SEL_MSB 0x06 /* BIST error select hi 8b */
+#define BIST_ERROR_STATE 0x07 /* BIST engine internal state */
+#define BIST_ERR_ADR0 0x08 /* BIST error address lo 8b */
+#define BIST_ERR_ADR1 0x09 /* BIST error address lomid 8b */
+#define BIST_ERR_ADR2 0x0a /* BIST error address himid 8b */
+#define BIST_ERR_ADR3 0x0b /* BIST error address hi 8b */
+
+/* FIFO registers
+ * ie = 0 for ingress, 1 for egress
+ * fn = FIFO number, 0-9
+ */
+#define REG_TEST(ie,fn) CRA(0x2,ie&1,0x00+fn) /* Mode & Test Register */
+#define REG_TOP_BOTTOM(ie,fn) CRA(0x2,ie&1,0x10+fn) /* FIFO Buffer Top & Bottom */
+#define REG_TAIL(ie,fn) CRA(0x2,ie&1,0x20+fn) /* FIFO Write Pointer */
+#define REG_HEAD(ie,fn) CRA(0x2,ie&1,0x30+fn) /* FIFO Read Pointer */
+#define REG_HIGH_LOW_WM(ie,fn) CRA(0x2,ie&1,0x40+fn) /* Flow Control Water Marks */
+#define REG_CT_THRHLD(ie,fn) CRA(0x2,ie&1,0x50+fn) /* Cut Through Threshold */
+#define REG_FIFO_DROP_CNT(ie,fn) CRA(0x2,ie&1,0x60+fn) /* Drop & CRC Error Counter */
+#define REG_DEBUG_BUF_CNT(ie,fn) CRA(0x2,ie&1,0x70+fn) /* Input Side Debug Counter */
+#define REG_BUCKI(fn) CRA(0x2,2,0x20+fn) /* Input Side Debug Counter */
+#define REG_BUCKE(fn) CRA(0x2,3,0x20+fn) /* Input Side Debug Counter */
+
+/* Traffic shaper buckets
+ * ie = 0 for ingress, 1 for egress
+ * bn = bucket number 0-10 (yes, 11 buckets)
+ */
+/* OK, this one's kinda ugly. Some hardware designers are perverse. */
+#define REG_TRAFFIC_SHAPER_BUCKET(ie,bn) CRA(0x2,ie&1,0x0a + (bn>7) | ((bn&7)<<4))
+#define REG_TRAFFIC_SHAPER_CONTROL(ie) CRA(0x2,ie&1,0x3b)
+
+#define REG_SRAM_ADR(ie) CRA(0x2,ie&1,0x0e) /* FIFO SRAM address */
+#define REG_SRAM_WR_STRB(ie) CRA(0x2,ie&1,0x1e) /* FIFO SRAM write strobe */
+#define REG_SRAM_RD_STRB(ie) CRA(0x2,ie&1,0x2e) /* FIFO SRAM read strobe */
+#define REG_SRAM_DATA_0(ie) CRA(0x2,ie&1,0x3e) /* FIFO SRAM data lo 8b */
+#define REG_SRAM_DATA_1(ie) CRA(0x2,ie&1,0x4e) /* FIFO SRAM data lomid 8b */
+#define REG_SRAM_DATA_2(ie) CRA(0x2,ie&1,0x5e) /* FIFO SRAM data himid 8b */
+#define REG_SRAM_DATA_3(ie) CRA(0x2,ie&1,0x6e) /* FIFO SRAM data hi 8b */
+#define REG_SRAM_DATA_BLK_TYPE(ie) CRA(0x2,ie&1,0x7e) /* FIFO SRAM tag */
+/* REG_ING_CONTROL equals REG_CONTROL with ie = 0, likewise REG_EGR_CONTROL is ie = 1 */
+#define REG_CONTROL(ie) CRA(0x2,ie&1,0x0f) /* FIFO control */
+#define REG_ING_CONTROL CRA(0x2,0x0,0x0f) /* Ingress control (alias) */
+#define REG_EGR_CONTROL CRA(0x2,0x1,0x0f) /* Egress control (alias) */
+#define REG_AGE_TIMER(ie) CRA(0x2,ie&1,0x1f) /* Aging timer */
+#define REG_AGE_INC(ie) CRA(0x2,ie&1,0x2f) /* Aging increment */
+#define DEBUG_OUT(ie) CRA(0x2,ie&1,0x3f) /* Output debug counter control */
+#define DEBUG_CNT(ie) CRA(0x2,ie&1,0x4f) /* Output debug counter */
+
+/* SPI4 interface */
+#define REG_SPI4_MISC CRA(0x5,0x0,0x00) /* Misc Register */
+#define REG_SPI4_STATUS CRA(0x5,0x0,0x01) /* CML Status */
+#define REG_SPI4_ING_SETUP0 CRA(0x5,0x0,0x02) /* Ingress Status Channel Setup */
+#define REG_SPI4_ING_SETUP1 CRA(0x5,0x0,0x03) /* Ingress Data Training Setup */
+#define REG_SPI4_ING_SETUP2 CRA(0x5,0x0,0x04) /* Ingress Data Burst Size Setup */
+#define REG_SPI4_EGR_SETUP0 CRA(0x5,0x0,0x05) /* Egress Status Channel Setup */
+#define REG_SPI4_DBG_CNT(n) CRA(0x5,0x0,0x10+n) /* Debug counters 0-9 */
+#define REG_SPI4_DBG_SETUP CRA(0x5,0x0,0x1A) /* Debug counters setup */
+#define REG_SPI4_TEST CRA(0x5,0x0,0x20) /* Test Setup Register */
+#define REG_TPGEN_UP0 CRA(0x5,0x0,0x21) /* Test Pattern generator user pattern 0 */
+#define REG_TPGEN_UP1 CRA(0x5,0x0,0x22) /* Test Pattern generator user pattern 1 */
+#define REG_TPCHK_UP0 CRA(0x5,0x0,0x23) /* Test Pattern checker user pattern 0 */
+#define REG_TPCHK_UP1 CRA(0x5,0x0,0x24) /* Test Pattern checker user pattern 1 */
+#define REG_TPSAM_P0 CRA(0x5,0x0,0x25) /* Sampled pattern 0 */
+#define REG_TPSAM_P1 CRA(0x5,0x0,0x26) /* Sampled pattern 1 */
+#define REG_TPERR_CNT CRA(0x5,0x0,0x27) /* Pattern checker error counter */
+#define REG_SPI4_STICKY CRA(0x5,0x0,0x30) /* Sticky bits register */
+#define REG_SPI4_DBG_INH CRA(0x5,0x0,0x31) /* Core egress & ingress inhibit */
+#define REG_SPI4_DBG_STATUS CRA(0x5,0x0,0x32) /* Sampled ingress status */
+#define REG_SPI4_DBG_GRANT CRA(0x5,0x0,0x33) /* Ingress cranted credit value */
+
+#define REG_SPI4_DESKEW CRA(0x5,0x0,0x43) /* Ingress cranted credit value */
+
+/* 10GbE MAC Block Registers */
+/* Note that those registers that are exactly the same for 10GbE as for
+ * tri-speed are only defined with the version that needs a port number.
+ * Pass 0xa in those cases.
+ *
+ * Also note that despite the presence of a MAC address register, this part
+ * does no ingress MAC address filtering. That register is used only for
+ * pause frame detection and generation.
+ */
+/* 10GbE specific, and different from tri-speed */
+#define REG_MISC_10G CRA(0x1,0xa,0x00) /* Misc 10GbE setup */
+#define REG_PAUSE_10G CRA(0x1,0xa,0x01) /* Pause register */
+#define REG_NORMALIZER_10G CRA(0x1,0xa,0x05) /* 10G normalizer */
+#define REG_STICKY_RX CRA(0x1,0xa,0x06) /* RX debug register */
+#define REG_DENORM_10G CRA(0x1,0xa,0x07) /* Denormalizer */
+#define REG_STICKY_TX CRA(0x1,0xa,0x08) /* TX sticky bits */
+#define REG_MAX_RXHIGH CRA(0x1,0xa,0x0a) /* XGMII lane 0-3 debug */
+#define REG_MAX_RXLOW CRA(0x1,0xa,0x0b) /* XGMII lane 4-7 debug */
+#define REG_MAC_TX_STICKY CRA(0x1,0xa,0x0c) /* MAC Tx state sticky debug */
+#define REG_MAC_TX_RUNNING CRA(0x1,0xa,0x0d) /* MAC Tx state running debug */
+#define REG_TX_ABORT_AGE CRA(0x1,0xa,0x14) /* Aged Tx frames discarded */
+#define REG_TX_ABORT_SHORT CRA(0x1,0xa,0x15) /* Short Tx frames discarded */
+#define REG_TX_ABORT_TAXI CRA(0x1,0xa,0x16) /* Taxi error frames discarded */
+#define REG_TX_ABORT_UNDERRUN CRA(0x1,0xa,0x17) /* Tx Underrun abort counter */
+#define REG_TX_DENORM_DISCARD CRA(0x1,0xa,0x18) /* Tx denormalizer discards */
+#define REG_XAUI_STAT_A CRA(0x1,0xa,0x20) /* XAUI status A */
+#define REG_XAUI_STAT_B CRA(0x1,0xa,0x21) /* XAUI status B */
+#define REG_XAUI_STAT_C CRA(0x1,0xa,0x22) /* XAUI status C */
+#define REG_XAUI_CONF_A CRA(0x1,0xa,0x23) /* XAUI configuration A */
+#define REG_XAUI_CONF_B CRA(0x1,0xa,0x24) /* XAUI configuration B */
+#define REG_XAUI_CODE_GRP_CNT CRA(0x1,0xa,0x25) /* XAUI code group error count */
+#define REG_XAUI_CONF_TEST_A CRA(0x1,0xa,0x26) /* XAUI test register A */
+#define REG_PDERRCNT CRA(0x1,0xa,0x27) /* XAUI test register B */
+
+/* pn = port number 0-9 for tri-speed, 10 for 10GbE */
+/* Both tri-speed and 10GbE */
+#define REG_MAX_LEN(pn) CRA(0x1,pn,0x02) /* Max length */
+#define REG_MAC_HIGH_ADDR(pn) CRA(0x1,pn,0x03) /* Upper 24 bits of MAC addr */
+#define REG_MAC_LOW_ADDR(pn) CRA(0x1,pn,0x04) /* Lower 24 bits of MAC addr */
+
+/* tri-speed only
+ * pn = port number, 0-9
+ */
+#define REG_MODE_CFG(pn) CRA(0x1,pn,0x00) /* Mode configuration */
+#define REG_PAUSE_CFG(pn) CRA(0x1,pn,0x01) /* Pause configuration */
+#define REG_NORMALIZER(pn) CRA(0x1,pn,0x05) /* Normalizer */
+#define REG_TBI_STATUS(pn) CRA(0x1,pn,0x06) /* TBI status */
+#define REG_PCS_STATUS_DBG(pn) CRA(0x1,pn,0x07) /* PCS status debug */
+#define REG_PCS_CTRL(pn) CRA(0x1,pn,0x08) /* PCS control */
+#define REG_TBI_CONFIG(pn) CRA(0x1,pn,0x09) /* TBI configuration */
+#define REG_STICK_BIT(pn) CRA(0x1,pn,0x0a) /* Sticky bits */
+#define REG_DEV_SETUP(pn) CRA(0x1,pn,0x0b) /* MAC clock/reset setup */
+#define REG_DROP_CNT(pn) CRA(0x1,pn,0x0c) /* Drop counter */
+#define REG_PORT_POS(pn) CRA(0x1,pn,0x0d) /* Preamble port position */
+#define REG_PORT_FAIL(pn) CRA(0x1,pn,0x0e) /* Preamble port position */
+#define REG_SERDES_CONF(pn) CRA(0x1,pn,0x0f) /* SerDes configuration */
+#define REG_SERDES_TEST(pn) CRA(0x1,pn,0x10) /* SerDes test */
+#define REG_SERDES_STAT(pn) CRA(0x1,pn,0x11) /* SerDes status */
+#define REG_SERDES_COM_CNT(pn) CRA(0x1,pn,0x12) /* SerDes comma counter */
+#define REG_DENORM(pn) CRA(0x1,pn,0x15) /* Frame denormalization */
+#define REG_DBG(pn) CRA(0x1,pn,0x16) /* Device 1G debug */
+#define REG_TX_IFG(pn) CRA(0x1,pn,0x18) /* Tx IFG config */
+#define REG_HDX(pn) CRA(0x1,pn,0x19) /* Half-duplex config */
+
+/* Statistics */
+/* pn = port number, 0-a, a = 10GbE */
+#define REG_RX_IN_BYTES(pn) CRA(0x4,pn,0x00) /* # Rx in octets */
+#define REG_RX_SYMBOL_CARRIER(pn) CRA(0x4,pn,0x01) /* Frames w/ symbol errors */
+#define REG_RX_PAUSE(pn) CRA(0x4,pn,0x02) /* # pause frames received */
+#define REG_RX_UNSUP_OPCODE(pn) CRA(0x4,pn,0x03) /* # control frames with unsupported opcode */
+#define REG_RX_OK_BYTES(pn) CRA(0x4,pn,0x04) /* # octets in good frames */
+#define REG_RX_BAD_BYTES(pn) CRA(0x4,pn,0x05) /* # octets in bad frames */
+#define REG_RX_UNICAST(pn) CRA(0x4,pn,0x06) /* # good unicast frames */
+#define REG_RX_MULTICAST(pn) CRA(0x4,pn,0x07) /* # good multicast frames */
+#define REG_RX_BROADCAST(pn) CRA(0x4,pn,0x08) /* # good broadcast frames */
+#define REG_CRC(pn) CRA(0x4,pn,0x09) /* # frames w/ bad CRC only */
+#define REG_RX_ALIGNMENT(pn) CRA(0x4,pn,0x0a) /* # frames w/ alignment err */
+#define REG_RX_UNDERSIZE(pn) CRA(0x4,pn,0x0b) /* # frames undersize */
+#define REG_RX_FRAGMENTS(pn) CRA(0x4,pn,0x0c) /* # frames undersize w/ crc err */
+#define REG_RX_IN_RANGE_LENGTH_ERROR(pn) CRA(0x4,pn,0x0d) /* # frames with length error */
+#define REG_RX_OUT_OF_RANGE_ERROR(pn) CRA(0x4,pn,0x0e) /* # frames with illegal length field */
+#define REG_RX_OVERSIZE(pn) CRA(0x4,pn,0x0f) /* # frames oversize */
+#define REG_RX_JABBERS(pn) CRA(0x4,pn,0x10) /* # frames oversize w/ crc err */
+#define REG_RX_SIZE_64(pn) CRA(0x4,pn,0x11) /* # frames 64 octets long */
+#define REG_RX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x12) /* # frames 65-127 octets */
+#define REG_RX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x13) /* # frames 128-255 */
+#define REG_RX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x14) /* # frames 256-511 */
+#define REG_RX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x15) /* # frames 512-1023 */
+#define REG_RX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x16) /* # frames 1024-1518 */
+#define REG_RX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x17) /* # frames 1519-max */
+
+#define REG_TX_OUT_BYTES(pn) CRA(0x4,pn,0x18) /* # octets tx */
+#define REG_TX_PAUSE(pn) CRA(0x4,pn,0x19) /* # pause frames sent */
+#define REG_TX_OK_BYTES(pn) CRA(0x4,pn,0x1a) /* # octets tx OK */
+#define REG_TX_UNICAST(pn) CRA(0x4,pn,0x1b) /* # frames unicast */
+#define REG_TX_MULTICAST(pn) CRA(0x4,pn,0x1c) /* # frames multicast */
+#define REG_TX_BROADCAST(pn) CRA(0x4,pn,0x1d) /* # frames broadcast */
+#define REG_TX_MULTIPLE_COLL(pn) CRA(0x4,pn,0x1e) /* # frames tx after multiple collisions */
+#define REG_TX_LATE_COLL(pn) CRA(0x4,pn,0x1f) /* # late collisions detected */
+#define REG_TX_XCOLL(pn) CRA(0x4,pn,0x20) /* # frames lost, excessive collisions */
+#define REG_TX_DEFER(pn) CRA(0x4,pn,0x21) /* # frames deferred on first tx attempt */
+#define REG_TX_XDEFER(pn) CRA(0x4,pn,0x22) /* # frames excessively deferred */
+#define REG_TX_CSENSE(pn) CRA(0x4,pn,0x23) /* carrier sense errors at frame end */
+#define REG_TX_SIZE_64(pn) CRA(0x4,pn,0x24) /* # frames 64 octets long */
+#define REG_TX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x25) /* # frames 65-127 octets */
+#define REG_TX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x26) /* # frames 128-255 */
+#define REG_TX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x27) /* # frames 256-511 */
+#define REG_TX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x28) /* # frames 512-1023 */
+#define REG_TX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x29) /* # frames 1024-1518 */
+#define REG_TX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x2a) /* # frames 1519-max */
+#define REG_TX_SINGLE_COLL(pn) CRA(0x4,pn,0x2b) /* # frames tx after single collision */
+#define REG_TX_BACKOFF2(pn) CRA(0x4,pn,0x2c) /* # frames tx ok after 2 backoffs/collisions */
+#define REG_TX_BACKOFF3(pn) CRA(0x4,pn,0x2d) /* after 3 backoffs/collisions */
+#define REG_TX_BACKOFF4(pn) CRA(0x4,pn,0x2e) /* after 4 */
+#define REG_TX_BACKOFF5(pn) CRA(0x4,pn,0x2f) /* after 5 */
+#define REG_TX_BACKOFF6(pn) CRA(0x4,pn,0x30) /* after 6 */
+#define REG_TX_BACKOFF7(pn) CRA(0x4,pn,0x31) /* after 7 */
+#define REG_TX_BACKOFF8(pn) CRA(0x4,pn,0x32) /* after 8 */
+#define REG_TX_BACKOFF9(pn) CRA(0x4,pn,0x33) /* after 9 */
+#define REG_TX_BACKOFF10(pn) CRA(0x4,pn,0x34) /* after 10 */
+#define REG_TX_BACKOFF11(pn) CRA(0x4,pn,0x35) /* after 11 */
+#define REG_TX_BACKOFF12(pn) CRA(0x4,pn,0x36) /* after 12 */
+#define REG_TX_BACKOFF13(pn) CRA(0x4,pn,0x37) /* after 13 */
+#define REG_TX_BACKOFF14(pn) CRA(0x4,pn,0x38) /* after 14 */
+#define REG_TX_BACKOFF15(pn) CRA(0x4,pn,0x39) /* after 15 */
+#define REG_TX_UNDERRUN(pn) CRA(0x4,pn,0x3a) /* # frames dropped from underrun */
+#define REG_RX_XGMII_PROT_ERR CRA(0x4,0xa,0x3b) /* # protocol errors detected on XGMII interface */
+#define REG_RX_IPG_SHRINK(pn) CRA(0x4,pn,0x3c) /* # of IPG shrinks detected */
+
+#define REG_STAT_STICKY1G(pn) CRA(0x4,pn,0x3e) /* tri-speed sticky bits */
+#define REG_STAT_STICKY10G CRA(0x4,0xa,0x3e) /* 10GbE sticky bits */
+#define REG_STAT_INIT(pn) CRA(0x4,pn,0x3f) /* Clear all statistics */
+
+/* MII-Management Block registers */
+/* These are for MII-M interface 0, which is the bidirectional LVTTL one. If
+ * we hooked up to the one with separate directions, the middle 0x0 needs to
+ * change to 0x1. And the current errata states that MII-M 1 doesn't work.
+ */
+
+#define REG_MIIM_STATUS CRA(0x3,0x0,0x00) /* MII-M Status */
+#define REG_MIIM_CMD CRA(0x3,0x0,0x01) /* MII-M Command */
+#define REG_MIIM_DATA CRA(0x3,0x0,0x02) /* MII-M Data */
+#define REG_MIIM_PRESCALE CRA(0x3,0x0,0x03) /* MII-M MDC Prescale */
+
+#define REG_ING_FFILT_UM_EN CRA(0x2, 0, 0xd)
+#define REG_ING_FFILT_BE_EN CRA(0x2, 0, 0x1d)
+#define REG_ING_FFILT_VAL0 CRA(0x2, 0, 0x2d)
+#define REG_ING_FFILT_VAL1 CRA(0x2, 0, 0x3d)
+#define REG_ING_FFILT_MASK0 CRA(0x2, 0, 0x4d)
+#define REG_ING_FFILT_MASK1 CRA(0x2, 0, 0x5d)
+#define REG_ING_FFILT_MASK2 CRA(0x2, 0, 0x6d)
+#define REG_ING_FFILT_ETYPE CRA(0x2, 0, 0x7d)
+
+
+/* Whew. */
+
+#endif
OpenPOWER on IntegriCloud