bnx2x: Create separate folder for bnx2x driver

This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
author: Dmitry Kravkov <dmitry@broadcom.com> 2010-07-27 12:31:10 +0000
committer: David S. Miller <davem@davemloft.net> 2010-07-27 20:35:39 -0700
commit: 5d1e859c5b600c491336f023a2f2105c24597226 (patch)
tree: 9391b004d9237f385c36297214a022cadcb8f84a /drivers/net/bnx2x/bnx2x_link.c
parent: 2c6952dfdda2f266f2f501792b8d6413caf25f7a (diff)
download: blackbird-op-linux-5d1e859c5b600c491336f023a2f2105c24597226.tar.gz
blackbird-op-linux-5d1e859c5b600c491336f023a2f2105c24597226.zip
1 files changed, 6735 insertions, 0 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
new file mode 100644
index 000000000000..0383e3066313
--- /dev/null
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -0,0 +1,6735 @@
+/* Copyright 2008-2009 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Written by Yaniv Rosner
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/mutex.h>
+
+#include "bnx2x.h"
+
+/********************************************************/
+#define ETH_HLEN			14
+#define ETH_OVREHEAD		(ETH_HLEN + 8)/* 8 for CRC + VLAN*/
+#define ETH_MIN_PACKET_SIZE		60
+#define ETH_MAX_PACKET_SIZE		1500
+#define ETH_MAX_JUMBO_PACKET_SIZE	9600
+#define MDIO_ACCESS_TIMEOUT		1000
+#define BMAC_CONTROL_RX_ENABLE	2
+
+/***********************************************************/
+/*			Shortcut definitions		   */
+/***********************************************************/
+
+#define NIG_LATCH_BC_ENABLE_MI_INT 0
+
+#define NIG_STATUS_EMAC0_MI_INT \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT
+#define NIG_STATUS_XGXS0_LINK10G \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
+#define NIG_STATUS_XGXS0_LINK_STATUS \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
+#define NIG_STATUS_SERDES0_LINK_STATUS \
+		NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
+#define NIG_MASK_MI_INT \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
+#define NIG_MASK_XGXS0_LINK10G \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G
+#define NIG_MASK_XGXS0_LINK_STATUS \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS
+#define NIG_MASK_SERDES0_LINK_STATUS \
+		NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS
+
+#define MDIO_AN_CL73_OR_37_COMPLETE \
+		(MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \
+		 MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE)
+
+#define XGXS_RESET_BITS \
+	(MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW |   \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ |      \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN |    \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB)
+
+#define SERDES_RESET_BITS \
+	(MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ |    \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN |  \
+	 MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD)
+
+#define AUTONEG_CL37		SHARED_HW_CFG_AN_ENABLE_CL37
+#define AUTONEG_CL73		SHARED_HW_CFG_AN_ENABLE_CL73
+#define AUTONEG_BAM 		SHARED_HW_CFG_AN_ENABLE_BAM
+#define AUTONEG_PARALLEL \
+				SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
+#define AUTONEG_SGMII_FIBER_AUTODET \
+				SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
+#define AUTONEG_REMOTE_PHY	SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
+
+#define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
+#define GP_STATUS_PAUSE_RSOLUTION_RXSIDE \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE
+#define GP_STATUS_SPEED_MASK \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK
+#define GP_STATUS_10M	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M
+#define GP_STATUS_100M	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M
+#define GP_STATUS_1G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G
+#define GP_STATUS_2_5G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G
+#define GP_STATUS_5G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G
+#define GP_STATUS_6G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G
+#define GP_STATUS_10G_HIG \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
+#define GP_STATUS_10G_CX4 \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
+#define GP_STATUS_12G_HIG \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG
+#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G
+#define GP_STATUS_13G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G
+#define GP_STATUS_15G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G
+#define GP_STATUS_16G	MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G
+#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
+#define GP_STATUS_10G_KX4 \
+			MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
+
+#define LINK_10THD			LINK_STATUS_SPEED_AND_DUPLEX_10THD
+#define LINK_10TFD			LINK_STATUS_SPEED_AND_DUPLEX_10TFD
+#define LINK_100TXHD		LINK_STATUS_SPEED_AND_DUPLEX_100TXHD
+#define LINK_100T4			LINK_STATUS_SPEED_AND_DUPLEX_100T4
+#define LINK_100TXFD		LINK_STATUS_SPEED_AND_DUPLEX_100TXFD
+#define LINK_1000THD		LINK_STATUS_SPEED_AND_DUPLEX_1000THD
+#define LINK_1000TFD		LINK_STATUS_SPEED_AND_DUPLEX_1000TFD
+#define LINK_1000XFD		LINK_STATUS_SPEED_AND_DUPLEX_1000XFD
+#define LINK_2500THD		LINK_STATUS_SPEED_AND_DUPLEX_2500THD
+#define LINK_2500TFD		LINK_STATUS_SPEED_AND_DUPLEX_2500TFD
+#define LINK_2500XFD		LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
+#define LINK_10GTFD			LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
+#define LINK_10GXFD			LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
+#define LINK_12GTFD			LINK_STATUS_SPEED_AND_DUPLEX_12GTFD
+#define LINK_12GXFD			LINK_STATUS_SPEED_AND_DUPLEX_12GXFD
+#define LINK_12_5GTFD		LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD
+#define LINK_12_5GXFD		LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD
+#define LINK_13GTFD			LINK_STATUS_SPEED_AND_DUPLEX_13GTFD
+#define LINK_13GXFD			LINK_STATUS_SPEED_AND_DUPLEX_13GXFD
+#define LINK_15GTFD			LINK_STATUS_SPEED_AND_DUPLEX_15GTFD
+#define LINK_15GXFD			LINK_STATUS_SPEED_AND_DUPLEX_15GXFD
+#define LINK_16GTFD			LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
+#define LINK_16GXFD			LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
+
+#define PHY_XGXS_FLAG			0x1
+#define PHY_SGMII_FLAG			0x2
+#define PHY_SERDES_FLAG			0x4
+
+/* */
+#define SFP_EEPROM_CON_TYPE_ADDR		0x2
+	#define SFP_EEPROM_CON_TYPE_VAL_LC 		0x7
+	#define SFP_EEPROM_CON_TYPE_VAL_COPPER	0x21
+
+
+#define SFP_EEPROM_COMP_CODE_ADDR		0x3
+	#define SFP_EEPROM_COMP_CODE_SR_MASK	(1<<4)
+	#define SFP_EEPROM_COMP_CODE_LR_MASK	(1<<5)
+	#define SFP_EEPROM_COMP_CODE_LRM_MASK	(1<<6)
+
+#define SFP_EEPROM_FC_TX_TECH_ADDR		0x8
+	#define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4
+	#define SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE	 0x8
+
+#define SFP_EEPROM_OPTIONS_ADDR 		0x40
+	#define SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1
+#define SFP_EEPROM_OPTIONS_SIZE 		2
+
+#define EDC_MODE_LINEAR	 			0x0022
+#define EDC_MODE_LIMITING	 			0x0044
+#define EDC_MODE_PASSIVE_DAC 			0x0055
+
+
+
+/**********************************************************/
+/*                     INTERFACE                          */
+/**********************************************************/
+#define CL45_WR_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
+	bnx2x_cl45_write(_bp, _port, 0, _phy_addr, \
+		DEFAULT_PHY_DEV_ADDR, \
+		(_bank + (_addr & 0xf)), \
+		_val)
+
+#define CL45_RD_OVER_CL22(_bp, _port, _phy_addr, _bank, _addr, _val) \
+	bnx2x_cl45_read(_bp, _port, 0, _phy_addr, \
+		DEFAULT_PHY_DEV_ADDR, \
+		(_bank + (_addr & 0xf)), \
+		_val)
+
+static void bnx2x_set_serdes_access(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u32 emac_base = (params->port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+	/* Set Clause 22 */
+	REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 1);
+	REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000);
+	udelay(500);
+	REG_WR(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f);
+	udelay(500);
+	 /* Set Clause 45 */
+	REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_ST + params->port*0x10, 0);
+}
+static void bnx2x_set_phy_mdio(struct link_params *params, u8 phy_flags)
+{
+	struct bnx2x *bp = params->bp;
+
+	if (phy_flags & PHY_XGXS_FLAG) {
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST +
+			   params->port*0x18, 0);
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+			   DEFAULT_PHY_DEV_ADDR);
+	} else {
+		bnx2x_set_serdes_access(params);
+
+		REG_WR(bp, NIG_REG_SERDES0_CTRL_MD_DEVAD +
+			   params->port*0x10,
+			   DEFAULT_PHY_DEV_ADDR);
+	}
+}
+
+static u32 bnx2x_bits_en(struct bnx2x *bp, u32 reg, u32 bits)
+{
+	u32 val = REG_RD(bp, reg);
+
+	val |= bits;
+	REG_WR(bp, reg, val);
+	return val;
+}
+
+static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
+{
+	u32 val = REG_RD(bp, reg);
+
+	val &= ~bits;
+	REG_WR(bp, reg, val);
+	return val;
+}
+
+static void bnx2x_emac_init(struct link_params *params,
+			   struct link_vars *vars)
+{
+	/* reset and unreset the emac core */
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	u32 val;
+	u16 timeout;
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+		   (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
+	udelay(5);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+		   (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port));
+
+	/* init emac - use read-modify-write */
+	/* self clear reset */
+	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
+
+	timeout = 200;
+	do {
+		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+		DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
+		if (!timeout) {
+			DP(NETIF_MSG_LINK, "EMAC timeout!\n");
+			return;
+		}
+		timeout--;
+	} while (val & EMAC_MODE_RESET);
+
+	/* Set mac address */
+	val = ((params->mac_addr[0] << 8) |
+		params->mac_addr[1]);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
+
+	val = ((params->mac_addr[2] << 24) |
+	       (params->mac_addr[3] << 16) |
+	       (params->mac_addr[4] << 8) |
+		params->mac_addr[5]);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
+}
+
+static u8 bnx2x_emac_enable(struct link_params *params,
+			  struct link_vars *vars, u8 lb)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	u32 val;
+
+	DP(NETIF_MSG_LINK, "enabling EMAC\n");
+
+	/* enable emac and not bmac */
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
+
+	/* for paladium */
+	if (CHIP_REV_IS_EMUL(bp)) {
+		/* Use lane 1 (of lanes 0-3) */
+		REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
+			    port*4, 1);
+	}
+	/* for fpga */
+	else
+
+	if (CHIP_REV_IS_FPGA(bp)) {
+		/* Use lane 1 (of lanes 0-3) */
+		DP(NETIF_MSG_LINK, "bnx2x_emac_enable: Setting FPGA\n");
+
+		REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 1);
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4,
+			    0);
+	} else
+	/* ASIC */
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+		u32 ser_lane = ((params->lane_config &
+			    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+			    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+		DP(NETIF_MSG_LINK, "XGXS\n");
+		/* select the master lanes (out of 0-3) */
+		REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 +
+			   port*4, ser_lane);
+		/* select XGXS */
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
+			   port*4, 1);
+
+	} else { /* SerDes */
+		DP(NETIF_MSG_LINK, "SerDes\n");
+		/* select SerDes */
+		REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL +
+			   port*4, 0);
+	}
+
+	bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
+		    EMAC_RX_MODE_RESET);
+	bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
+		    EMAC_TX_MODE_RESET);
+
+	if (CHIP_REV_IS_SLOW(bp)) {
+		/* config GMII mode */
+		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+		EMAC_WR(bp, EMAC_REG_EMAC_MODE,
+			    (val | EMAC_MODE_PORT_GMII));
+	} else { /* ASIC */
+		/* pause enable/disable */
+		bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
+			       EMAC_RX_MODE_FLOW_EN);
+		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+			bnx2x_bits_en(bp, emac_base +
+				    EMAC_REG_EMAC_RX_MODE,
+				    EMAC_RX_MODE_FLOW_EN);
+
+		bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
+			     (EMAC_TX_MODE_EXT_PAUSE_EN |
+			      EMAC_TX_MODE_FLOW_EN));
+		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+			bnx2x_bits_en(bp, emac_base +
+				    EMAC_REG_EMAC_TX_MODE,
+				   (EMAC_TX_MODE_EXT_PAUSE_EN |
+				    EMAC_TX_MODE_FLOW_EN));
+	}
+
+	/* KEEP_VLAN_TAG, promiscuous */
+	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
+	val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
+
+	/* Set Loopback */
+	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
+	if (lb)
+		val |= 0x810;
+	else
+		val &= ~0x810;
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
+
+	/* enable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
+
+	/* enable emac for jumbo packets */
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
+		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
+		 (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
+
+	/* strip CRC */
+	REG_WR(bp, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port*4, 0x1);
+
+	/* disable the NIG in/out to the bmac */
+	REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x0);
+
+	/* enable the NIG in/out to the emac */
+	REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
+	val = 0;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		val = 1;
+
+	REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x1);
+
+	if (CHIP_REV_IS_EMUL(bp)) {
+		/* take the BigMac out of reset */
+		REG_WR(bp,
+			   GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+			   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+		/* enable access for bmac registers */
+		REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
+	} else
+		REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x0);
+
+	vars->mac_type = MAC_TYPE_EMAC;
+	return 0;
+}
+
+
+
+static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
+			  u8 is_lb)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+			       NIG_REG_INGRESS_BMAC0_MEM;
+	u32 wb_data[2];
+	u32 val;
+
+	DP(NETIF_MSG_LINK, "Enabling BigMAC\n");
+	/* reset and unreset the BigMac */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+	       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+	msleep(1);
+
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+	       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+	/* enable access for bmac registers */
+	REG_WR(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4, 0x1);
+
+	/* XGXS control */
+	wb_data[0] = 0x3c;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr +
+		      BIGMAC_REGISTER_BMAC_XGXS_CONTROL,
+		      wb_data, 2);
+
+	/* tx MAC SA */
+	wb_data[0] = ((params->mac_addr[2] << 24) |
+		       (params->mac_addr[3] << 16) |
+		       (params->mac_addr[4] << 8) |
+			params->mac_addr[5]);
+	wb_data[1] = ((params->mac_addr[0] << 8) |
+			params->mac_addr[1]);
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
+		    wb_data, 2);
+
+	/* tx control */
+	val = 0xc0;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		val |= 0x800000;
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL,
+			wb_data, 2);
+
+	/* mac control */
+	val = 0x3;
+	if (is_lb) {
+		val |= 0x4;
+		DP(NETIF_MSG_LINK, "enable bmac loopback\n");
+	}
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+		    wb_data, 2);
+
+	/* set rx mtu */
+	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE,
+			wb_data, 2);
+
+	/* rx control set to don't strip crc */
+	val = 0x14;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+		val |= 0x20;
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL,
+			wb_data, 2);
+
+	/* set tx mtu */
+	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE,
+			wb_data, 2);
+
+	/* set cnt max size */
+	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE,
+		    wb_data, 2);
+
+	/* configure safc */
+	wb_data[0] = 0x1000200;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
+		    wb_data, 2);
+	/* fix for emulation */
+	if (CHIP_REV_IS_EMUL(bp)) {
+		wb_data[0] = 0xf000;
+		wb_data[1] = 0;
+		REG_WR_DMAE(bp,
+			    bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD,
+			    wb_data, 2);
+	}
+
+	REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 0x1);
+	REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
+	val = 0;
+	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+		val = 1;
+	REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, 0x0);
+	REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0x1);
+	REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0x1);
+
+	vars->mac_type = MAC_TYPE_BMAC;
+	return 0;
+}
+
+static void bnx2x_phy_deassert(struct link_params *params, u8 phy_flags)
+{
+	struct bnx2x *bp = params->bp;
+	u32 val;
+
+	if (phy_flags & PHY_XGXS_FLAG) {
+		DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:XGXS\n");
+		val = XGXS_RESET_BITS;
+
+	} else { /* SerDes */
+		DP(NETIF_MSG_LINK, "bnx2x_phy_deassert:SerDes\n");
+		val = SERDES_RESET_BITS;
+	}
+
+	val = val << (params->port*16);
+
+	/* reset and unreset the SerDes/XGXS */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
+		    val);
+	udelay(500);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET,
+		    val);
+	bnx2x_set_phy_mdio(params, phy_flags);
+}
+
+void bnx2x_link_status_update(struct link_params *params,
+			    struct link_vars   *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 link_10g;
+	u8 port = params->port;
+
+	if (params->switch_cfg ==  SWITCH_CFG_1G)
+		vars->phy_flags = PHY_SERDES_FLAG;
+	else
+		vars->phy_flags = PHY_XGXS_FLAG;
+	vars->link_status = REG_RD(bp, params->shmem_base +
+					  offsetof(struct shmem_region,
+					   port_mb[port].link_status));
+
+	vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
+
+	if (vars->link_up) {
+		DP(NETIF_MSG_LINK, "phy link up\n");
+
+		vars->phy_link_up = 1;
+		vars->duplex = DUPLEX_FULL;
+		switch (vars->link_status &
+					LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
+			case LINK_10THD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_10TFD:
+				vars->line_speed = SPEED_10;
+				break;
+
+			case LINK_100TXHD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_100T4:
+			case LINK_100TXFD:
+				vars->line_speed = SPEED_100;
+				break;
+
+			case LINK_1000THD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_1000TFD:
+				vars->line_speed = SPEED_1000;
+				break;
+
+			case LINK_2500THD:
+				vars->duplex = DUPLEX_HALF;
+				/* fall thru */
+			case LINK_2500TFD:
+				vars->line_speed = SPEED_2500;
+				break;
+
+			case LINK_10GTFD:
+				vars->line_speed = SPEED_10000;
+				break;
+
+			case LINK_12GTFD:
+				vars->line_speed = SPEED_12000;
+				break;
+
+			case LINK_12_5GTFD:
+				vars->line_speed = SPEED_12500;
+				break;
+
+			case LINK_13GTFD:
+				vars->line_speed = SPEED_13000;
+				break;
+
+			case LINK_15GTFD:
+				vars->line_speed = SPEED_15000;
+				break;
+
+			case LINK_16GTFD:
+				vars->line_speed = SPEED_16000;
+				break;
+
+			default:
+				break;
+		}
+
+		if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
+			vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX;
+		else
+			vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX;
+
+		if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
+			vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX;
+		else
+			vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX;
+
+		if (vars->phy_flags & PHY_XGXS_FLAG) {
+			if (vars->line_speed &&
+			    ((vars->line_speed == SPEED_10) ||
+			     (vars->line_speed == SPEED_100))) {
+				vars->phy_flags |= PHY_SGMII_FLAG;
+			} else {
+				vars->phy_flags &= ~PHY_SGMII_FLAG;
+			}
+		}
+
+		/* anything 10 and over uses the bmac */
+		link_10g = ((vars->line_speed == SPEED_10000) ||
+			    (vars->line_speed == SPEED_12000) ||
+			    (vars->line_speed == SPEED_12500) ||
+			    (vars->line_speed == SPEED_13000) ||
+			    (vars->line_speed == SPEED_15000) ||
+			    (vars->line_speed == SPEED_16000));
+		if (link_10g)
+			vars->mac_type = MAC_TYPE_BMAC;
+		else
+			vars->mac_type = MAC_TYPE_EMAC;
+
+	} else { /* link down */
+		DP(NETIF_MSG_LINK, "phy link down\n");
+
+		vars->phy_link_up = 0;
+
+		vars->line_speed = 0;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+
+		/* indicate no mac active */
+		vars->mac_type = MAC_TYPE_NONE;
+	}
+
+	DP(NETIF_MSG_LINK, "link_status 0x%x  phy_link_up %x\n",
+		 vars->link_status, vars->phy_link_up);
+	DP(NETIF_MSG_LINK, "line_speed %x  duplex %x  flow_ctrl 0x%x\n",
+		 vars->line_speed, vars->duplex, vars->flow_ctrl);
+}
+
+static void bnx2x_update_mng(struct link_params *params, u32 link_status)
+{
+	struct bnx2x *bp = params->bp;
+
+	REG_WR(bp, params->shmem_base +
+		   offsetof(struct shmem_region,
+			    port_mb[params->port].link_status),
+			link_status);
+}
+
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
+{
+	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+		NIG_REG_INGRESS_BMAC0_MEM;
+	u32 wb_data[2];
+	u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
+
+	/* Only if the bmac is out of reset */
+	if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+			(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) &&
+	    nig_bmac_enable) {
+
+		/* Clear Rx Enable bit in BMAC_CONTROL register */
+		REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+			    wb_data, 2);
+		wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
+		REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+			    wb_data, 2);
+
+		msleep(1);
+	}
+}
+
+static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
+			 u32 line_speed)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u32 init_crd, crd;
+	u32 count = 1000;
+
+	/* disable port */
+	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
+
+	/* wait for init credit */
+	init_crd = REG_RD(bp, PBF_REG_P0_INIT_CRD + port*4);
+	crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
+	DP(NETIF_MSG_LINK, "init_crd 0x%x  crd 0x%x\n", init_crd, crd);
+
+	while ((init_crd != crd) && count) {
+		msleep(5);
+
+		crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
+		count--;
+	}
+	crd = REG_RD(bp, PBF_REG_P0_CREDIT + port*8);
+	if (init_crd != crd) {
+		DP(NETIF_MSG_LINK, "BUG! init_crd 0x%x != crd 0x%x\n",
+			  init_crd, crd);
+		return -EINVAL;
+	}
+
+	if (flow_ctrl & BNX2X_FLOW_CTRL_RX ||
+	    line_speed == SPEED_10 ||
+	    line_speed == SPEED_100 ||
+	    line_speed == SPEED_1000 ||
+	    line_speed == SPEED_2500) {
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
+		/* update threshold */
+		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
+		/* update init credit */
+		init_crd = 778; 	/* (800-18-4) */
+
+	} else {
+		u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
+			      ETH_OVREHEAD)/16;
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
+		/* update threshold */
+		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
+		/* update init credit */
+		switch (line_speed) {
+		case SPEED_10000:
+			init_crd = thresh + 553 - 22;
+			break;
+
+		case SPEED_12000:
+			init_crd = thresh + 664 - 22;
+			break;
+
+		case SPEED_13000:
+			init_crd = thresh + 742 - 22;
+			break;
+
+		case SPEED_16000:
+			init_crd = thresh + 778 - 22;
+			break;
+		default:
+			DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+				  line_speed);
+			return -EINVAL;
+		}
+	}
+	REG_WR(bp, PBF_REG_P0_INIT_CRD + port*4, init_crd);
+	DP(NETIF_MSG_LINK, "PBF updated to speed %d credit %d\n",
+		 line_speed, init_crd);
+
+	/* probe the credit changes */
+	REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x1);
+	msleep(5);
+	REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0x0);
+
+	/* enable port */
+	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x0);
+	return 0;
+}
+
+static u32 bnx2x_get_emac_base(struct bnx2x *bp, u32 ext_phy_type, u8 port)
+{
+	u32 emac_base;
+
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+		/* All MDC/MDIO is directed through single EMAC */
+		if (REG_RD(bp, NIG_REG_PORT_SWAP))
+			emac_base = GRCBASE_EMAC0;
+		else
+			emac_base = GRCBASE_EMAC1;
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+		emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
+		break;
+	default:
+		emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+		break;
+	}
+	return emac_base;
+
+}
+
+u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
+		  u8 phy_addr, u8 devad, u16 reg, u16 val)
+{
+	u32 tmp, saved_mode;
+	u8 i, rc = 0;
+	u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port);
+
+	/* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+	 * (a value of 49==0x31) and make sure that the AUTO poll is off
+	 */
+
+	saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	tmp = saved_mode & ~(EMAC_MDIO_MODE_AUTO_POLL |
+			     EMAC_MDIO_MODE_CLOCK_CNT);
+	tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+		(49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+	REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	udelay(40);
+
+	/* address */
+
+	tmp = ((phy_addr << 21) | (devad << 16) | reg |
+	       EMAC_MDIO_COMM_COMMAND_ADDRESS |
+	       EMAC_MDIO_COMM_START_BUSY);
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
+
+	for (i = 0; i < 50; i++) {
+		udelay(10);
+
+		tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
+		if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
+			udelay(5);
+			break;
+		}
+	}
+	if (tmp & EMAC_MDIO_COMM_START_BUSY) {
+		DP(NETIF_MSG_LINK, "write phy register failed\n");
+		rc = -EFAULT;
+	} else {
+		/* data */
+		tmp = ((phy_addr << 21) | (devad << 16) | val |
+		       EMAC_MDIO_COMM_COMMAND_WRITE_45 |
+		       EMAC_MDIO_COMM_START_BUSY);
+		REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
+
+		for (i = 0; i < 50; i++) {
+			udelay(10);
+
+			tmp = REG_RD(bp, mdio_ctrl +
+					 EMAC_REG_EMAC_MDIO_COMM);
+			if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
+				udelay(5);
+				break;
+			}
+		}
+		if (tmp & EMAC_MDIO_COMM_START_BUSY) {
+			DP(NETIF_MSG_LINK, "write phy register failed\n");
+			rc = -EFAULT;
+		}
+	}
+
+	/* Restore the saved mode */
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
+
+	return rc;
+}
+
+u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
+		 u8 phy_addr, u8 devad, u16 reg, u16 *ret_val)
+{
+	u32 val, saved_mode;
+	u16 i;
+	u8 rc = 0;
+
+	u32 mdio_ctrl = bnx2x_get_emac_base(bp, ext_phy_type, port);
+	/* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+	 * (a value of 49==0x31) and make sure that the AUTO poll is off
+	 */
+
+	saved_mode = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	val = saved_mode & ((EMAC_MDIO_MODE_AUTO_POLL |
+			     EMAC_MDIO_MODE_CLOCK_CNT));
+	val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+		(49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+	REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+	udelay(40);
+
+	/* address */
+	val = ((phy_addr << 21) | (devad << 16) | reg |
+	       EMAC_MDIO_COMM_COMMAND_ADDRESS |
+	       EMAC_MDIO_COMM_START_BUSY);
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
+
+	for (i = 0; i < 50; i++) {
+		udelay(10);
+
+		val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
+		if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
+			udelay(5);
+			break;
+		}
+	}
+	if (val & EMAC_MDIO_COMM_START_BUSY) {
+		DP(NETIF_MSG_LINK, "read phy register failed\n");
+
+		*ret_val = 0;
+		rc = -EFAULT;
+
+	} else {
+		/* data */
+		val = ((phy_addr << 21) | (devad << 16) |
+		       EMAC_MDIO_COMM_COMMAND_READ_45 |
+		       EMAC_MDIO_COMM_START_BUSY);
+		REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
+
+		for (i = 0; i < 50; i++) {
+			udelay(10);
+
+			val = REG_RD(bp, mdio_ctrl +
+					  EMAC_REG_EMAC_MDIO_COMM);
+			if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
+				*ret_val = (u16)(val & EMAC_MDIO_COMM_DATA);
+				break;
+			}
+		}
+		if (val & EMAC_MDIO_COMM_START_BUSY) {
+			DP(NETIF_MSG_LINK, "read phy register failed\n");
+
+			*ret_val = 0;
+			rc = -EFAULT;
+		}
+	}
+
+	/* Restore the saved mode */
+	REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, saved_mode);
+
+	return rc;
+}
+
+static void bnx2x_set_aer_mmd(struct link_params *params,
+			    struct link_vars   *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u32 ser_lane;
+	u16 offset;
+
+	ser_lane = ((params->lane_config &
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+	offset = (vars->phy_flags & PHY_XGXS_FLAG) ?
+		(params->phy_addr + ser_lane) : 0;
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_AER_BLOCK,
+			      MDIO_AER_BLOCK_AER_REG, 0x3800 + offset);
+}
+
+static void bnx2x_set_master_ln(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 new_master_ln, ser_lane;
+	ser_lane =  ((params->lane_config &
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+		     PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+	/* set the master_ln for AN */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_XGXS_BLOCK2,
+			      MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
+			      &new_master_ln);
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_XGXS_BLOCK2 ,
+			      MDIO_XGXS_BLOCK2_TEST_MODE_LANE,
+			      (new_master_ln | ser_lane));
+}
+
+static u8 bnx2x_reset_unicore(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 mii_control;
+	u16 i;
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
+
+	/* reset the unicore */
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL,
+			      (mii_control |
+			       MDIO_COMBO_IEEO_MII_CONTROL_RESET));
+	if (params->switch_cfg == SWITCH_CFG_1G)
+		bnx2x_set_serdes_access(params);
+
+	/* wait for the reset to self clear */
+	for (i = 0; i < MDIO_ACCESS_TIMEOUT; i++) {
+		udelay(5);
+
+		/* the reset erased the previous bank value */
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL,
+			      &mii_control);
+
+		if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) {
+			udelay(5);
+			return 0;
+		}
+	}
+
+	DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n");
+	return -EINVAL;
+
+}
+
+static void bnx2x_set_swap_lanes(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	/* Each two bits represents a lane number:
+	   No swap is 0123 => 0x1b no need to enable the swap */
+	u16 ser_lane, rx_lane_swap, tx_lane_swap;
+
+	ser_lane = ((params->lane_config &
+			 PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+			PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+	rx_lane_swap = ((params->lane_config &
+			     PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >>
+			    PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT);
+	tx_lane_swap = ((params->lane_config &
+			     PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >>
+			    PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT);
+
+	if (rx_lane_swap != 0x1b) {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				    MDIO_REG_BANK_XGXS_BLOCK2,
+				    MDIO_XGXS_BLOCK2_RX_LN_SWAP,
+				    (rx_lane_swap |
+				    MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE |
+				    MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE));
+	} else {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_XGXS_BLOCK2,
+				      MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0);
+	}
+
+	if (tx_lane_swap != 0x1b) {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_XGXS_BLOCK2,
+				      MDIO_XGXS_BLOCK2_TX_LN_SWAP,
+				      (tx_lane_swap |
+				       MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE));
+	} else {
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_XGXS_BLOCK2,
+				      MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0);
+	}
+}
+
+static void bnx2x_set_parallel_detection(struct link_params *params,
+				       u8       	 phy_flags)
+{
+	struct bnx2x *bp = params->bp;
+	u16 control2;
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
+			      &control2);
+	if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
+	else
+		control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
+	DP(NETIF_MSG_LINK, "params->speed_cap_mask = 0x%x, control2 = 0x%x\n",
+		params->speed_cap_mask, control2);
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
+			      control2);
+
+	if ((phy_flags & PHY_XGXS_FLAG) &&
+	     (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
+		DP(NETIF_MSG_LINK, "XGXS\n");
+
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				MDIO_REG_BANK_10G_PARALLEL_DETECT,
+				MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+				MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
+
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				MDIO_REG_BANK_10G_PARALLEL_DETECT,
+				MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+				&control2);
+
+
+		control2 |=
+		    MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
+
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				MDIO_REG_BANK_10G_PARALLEL_DETECT,
+				MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+				control2);
+
+		/* Disable parallel detection of HiG */
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				MDIO_REG_BANK_XGXS_BLOCK2,
+				MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
+				MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
+				MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
+	}
+}
+
+static void bnx2x_set_autoneg(struct link_params *params,
+			    struct link_vars *vars,
+			    u8 enable_cl73)
+{
+	struct bnx2x *bp = params->bp;
+	u16 reg_val;
+
+	/* CL37 Autoneg */
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
+
+	/* CL37 Autoneg Enabled */
+	if (vars->line_speed == SPEED_AUTO_NEG)
+		reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
+	else /* CL37 Autoneg Disabled */
+		reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+			     MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN);
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
+
+	/* Enable/Disable Autodetection */
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
+	reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN |
+		    MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT);
+	reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE;
+	if (vars->line_speed == SPEED_AUTO_NEG)
+		reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
+	else
+		reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val);
+
+	/* Enable TetonII and BAM autoneg */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_BAM_NEXT_PAGE,
+			      MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
+			  &reg_val);
+	if (vars->line_speed == SPEED_AUTO_NEG) {
+		/* Enable BAM aneg Mode and TetonII aneg Mode */
+		reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
+			    MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
+	} else {
+		/* TetonII and BAM Autoneg Disabled */
+		reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
+			     MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
+	}
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_BAM_NEXT_PAGE,
+			      MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
+			      reg_val);
+
+	if (enable_cl73) {
+		/* Enable Cl73 FSM status bits */
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_CL73_USERB0,
+				    MDIO_CL73_USERB0_CL73_UCTRL,
+				      0xe);
+
+		/* Enable BAM Station Manager*/
+		CL45_WR_OVER_CL22(bp, params->port,
+			params->phy_addr,
+			MDIO_REG_BANK_CL73_USERB0,
+			MDIO_CL73_USERB0_CL73_BAM_CTRL1,
+			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
+			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
+			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);
+
+		/* Advertise CL73 link speeds */
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_CL73_IEEEB1,
+					      MDIO_CL73_IEEEB1_AN_ADV2,
+					      &reg_val);
+		if (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
+		if (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
+
+			CL45_WR_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_CL73_IEEEB1,
+					      MDIO_CL73_IEEEB1_AN_ADV2,
+				      reg_val);
+
+		/* CL73 Autoneg Enabled */
+		reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
+
+	} else /* CL73 Autoneg Disabled */
+		reg_val = 0;
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB0,
+			      MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val);
+}
+
+/* program SerDes, forced speed */
+static void bnx2x_program_serdes(struct link_params *params,
+			       struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u16 reg_val;
+
+	/* program duplex, disable autoneg and sgmii*/
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
+	reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
+		     MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+		     MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK);
+	if (params->req_duplex == DUPLEX_FULL)
+		reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
+
+	/* program speed
+	   - needed only if the speed is greater than 1G (2.5G or 10G) */
+	CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_SERDES_DIGITAL,
+				      MDIO_SERDES_DIGITAL_MISC1, &reg_val);
+	/* clearing the speed value before setting the right speed */
+	DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
+
+	reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
+		     MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
+
+	if (!((vars->line_speed == SPEED_1000) ||
+	      (vars->line_speed == SPEED_100) ||
+	      (vars->line_speed == SPEED_10))) {
+
+		reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
+			    MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
+		if (vars->line_speed == SPEED_10000)
+			reg_val |=
+				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
+		if (vars->line_speed == SPEED_13000)
+			reg_val |=
+				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
+	}
+
+	CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_SERDES_DIGITAL,
+				      MDIO_SERDES_DIGITAL_MISC1, reg_val);
+
+}
+
+static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 val = 0;
+
+	/* configure the 48 bits for BAM AN */
+
+	/* set extended capabilities */
+	if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
+		val |= MDIO_OVER_1G_UP1_2_5G;
+	if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+		val |= MDIO_OVER_1G_UP1_10G;
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_OVER_1G,
+			      MDIO_OVER_1G_UP1, val);
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_OVER_1G,
+			      MDIO_OVER_1G_UP3, 0x400);
+}
+
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc)
+{
+	struct bnx2x *bp = params->bp;
+	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
+	/* resolve pause mode and advertisement
+	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
+
+	switch (params->req_flow_ctrl) {
+	case BNX2X_FLOW_CTRL_AUTO:
+		if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) {
+			*ieee_fc |=
+			     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		} else {
+			*ieee_fc |=
+		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+		}
+		break;
+	case BNX2X_FLOW_CTRL_TX:
+		*ieee_fc |=
+		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+		break;
+
+	case BNX2X_FLOW_CTRL_RX:
+	case BNX2X_FLOW_CTRL_BOTH:
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		break;
+
+	case BNX2X_FLOW_CTRL_NONE:
+	default:
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+		break;
+	}
+	DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
+}
+
+static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
+					   u16 ieee_fc)
+{
+	struct bnx2x *bp = params->bp;
+	u16 val;
+	/* for AN, we are always publishing full duplex */
+
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_COMBO_IEEE0,
+			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc);
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB1,
+			      MDIO_CL73_IEEEB1_AN_ADV1, &val);
+	val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH;
+	val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK);
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB1,
+			      MDIO_CL73_IEEEB1_AN_ADV1, val);
+}
+
+static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73)
+{
+	struct bnx2x *bp = params->bp;
+	u16 mii_control;
+
+	DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");
+	/* Enable and restart BAM/CL37 aneg */
+
+	if (enable_cl73) {
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_CL73_IEEEB0,
+				      MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+				      &mii_control);
+
+		CL45_WR_OVER_CL22(bp, params->port,
+				params->phy_addr,
+				MDIO_REG_BANK_CL73_IEEEB0,
+				MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+				(mii_control |
+				MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
+				MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
+	} else {
+
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_COMBO_IEEE0,
+				      MDIO_COMBO_IEEE0_MII_CONTROL,
+				      &mii_control);
+		DP(NETIF_MSG_LINK,
+			 "bnx2x_restart_autoneg mii_control before = 0x%x\n",
+			 mii_control);
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_COMBO_IEEE0,
+				      MDIO_COMBO_IEEE0_MII_CONTROL,
+				      (mii_control |
+				       MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+				       MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
+	}
+}
+
+static void bnx2x_initialize_sgmii_process(struct link_params *params,
+					 struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u16 control1;
+
+	/* in SGMII mode, the unicore is always slave */
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
+		      &control1);
+	control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT;
+	/* set sgmii mode (and not fiber) */
+	control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE |
+		      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET |
+		      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE);
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1,
+			      control1);
+
+	/* if forced speed */
+	if (!(vars->line_speed == SPEED_AUTO_NEG)) {
+		/* set speed, disable autoneg */
+		u16 mii_control;
+
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_COMBO_IEEE0,
+				      MDIO_COMBO_IEEE0_MII_CONTROL,
+				      &mii_control);
+		mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+				 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
+				 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
+
+		switch (vars->line_speed) {
+		case SPEED_100:
+			mii_control |=
+				MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
+			break;
+		case SPEED_1000:
+			mii_control |=
+				MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000;
+			break;
+		case SPEED_10:
+			/* there is nothing to set for 10M */
+			break;
+		default:
+			/* invalid speed for SGMII */
+			DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+				  vars->line_speed);
+			break;
+		}
+
+		/* setting the full duplex */
+		if (params->req_duplex == DUPLEX_FULL)
+			mii_control |=
+				MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_COMBO_IEEE0,
+				      MDIO_COMBO_IEEE0_MII_CONTROL,
+				      mii_control);
+
+	} else { /* AN mode */
+		/* enable and restart AN */
+		bnx2x_restart_autoneg(params, 0);
+	}
+}
+
+
+/*
+ * link management
+ */
+
+static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
+{						/*  LD	    LP	 */
+	switch (pause_result) { 		/* ASYM P ASYM P */
+	case 0xb:       			/*   1  0   1  1 */
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
+		break;
+
+	case 0xe:       			/*   1  1   1  0 */
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
+		break;
+
+	case 0x5:       			/*   0  1   0  1 */
+	case 0x7:       			/*   0  1   1  1 */
+	case 0xd:       			/*   1  1   0  1 */
+	case 0xf:       			/*   1  1   1  1 */
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
+		break;
+
+	default:
+		break;
+	}
+}
+
+static u8 bnx2x_ext_phy_resolve_fc(struct link_params *params,
+				  struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 ext_phy_addr;
+	u16 ld_pause;		/* local */
+	u16 lp_pause;		/* link partner */
+	u16 an_complete;	/* AN complete */
+	u16 pause_result;
+	u8 ret = 0;
+	u32 ext_phy_type;
+	u8 port = params->port;
+	ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	/* read twice */
+
+	bnx2x_cl45_read(bp, port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_STATUS, &an_complete);
+	bnx2x_cl45_read(bp, port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_STATUS, &an_complete);
+
+	if (an_complete & MDIO_AN_REG_STATUS_AN_COMPLETE) {
+		ret = 1;
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_AN_DEVAD,
+			      MDIO_AN_REG_ADV_PAUSE, &ld_pause);
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_AN_DEVAD,
+			      MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
+		pause_result = (ld_pause &
+				MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
+		pause_result |= (lp_pause &
+				 MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
+		DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
+		   pause_result);
+		bnx2x_pause_resolve(vars, pause_result);
+		if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
+		     ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LD, &ld_pause);
+
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LP, &lp_pause);
+			pause_result = (ld_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
+			pause_result |= (lp_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
+
+			bnx2x_pause_resolve(vars, pause_result);
+			DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n",
+				 pause_result);
+		}
+	}
+	return ret;
+}
+
+static u8 bnx2x_direct_parallel_detect_used(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 pd_10g, status2_1000x;
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+			      &status2_1000x);
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+			      &status2_1000x);
+	if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
+		DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n",
+			 params->port);
+		return 1;
+	}
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_10G_PARALLEL_DETECT,
+			      MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS,
+			      &pd_10g);
+
+	if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
+		DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n",
+			 params->port);
+		return 1;
+	}
+	return 0;
+}
+
+static void bnx2x_flow_ctrl_resolve(struct link_params *params,
+				  struct link_vars *vars,
+				  u32 gp_status)
+{
+	struct bnx2x *bp = params->bp;
+	u16 ld_pause;   /* local driver */
+	u16 lp_pause;   /* link partner */
+	u16 pause_result;
+
+	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+
+	/* resolve from gp_status in case of AN complete and not sgmii */
+	if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
+	    (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
+	    (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
+	    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+	     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
+		if (bnx2x_direct_parallel_detect_used(params)) {
+			vars->flow_ctrl = params->req_fc_auto_adv;
+			return;
+		}
+		if ((gp_status &
+		    (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
+		     MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) ==
+		    (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
+		     MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) {
+
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_CL73_IEEEB1,
+					      MDIO_CL73_IEEEB1_AN_ADV1,
+					      &ld_pause);
+			CL45_RD_OVER_CL22(bp, params->port,
+					     params->phy_addr,
+					     MDIO_REG_BANK_CL73_IEEEB1,
+					     MDIO_CL73_IEEEB1_AN_LP_ADV1,
+					     &lp_pause);
+			pause_result = (ld_pause &
+					MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK)
+					>> 8;
+			pause_result |= (lp_pause &
+					MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK)
+					>> 10;
+			DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n",
+				 pause_result);
+		} else {
+
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_COMBO_IEEE0,
+					      MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
+					      &ld_pause);
+			CL45_RD_OVER_CL22(bp, params->port,
+			       params->phy_addr,
+			       MDIO_REG_BANK_COMBO_IEEE0,
+			       MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
+			       &lp_pause);
+			pause_result = (ld_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
+			pause_result |= (lp_pause &
+				 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
+			DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n",
+				 pause_result);
+		}
+		bnx2x_pause_resolve(vars, pause_result);
+	} else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
+		   (bnx2x_ext_phy_resolve_fc(params, vars))) {
+		return;
+	} else {
+		if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
+			vars->flow_ctrl = params->req_fc_auto_adv;
+		else
+			vars->flow_ctrl = params->req_flow_ctrl;
+	}
+	DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
+}
+
+static void bnx2x_check_fallback_to_cl37(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 rx_status, ustat_val, cl37_fsm_recieved;
+	DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n");
+	/* Step 1: Make sure signal is detected */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_RX0,
+			      MDIO_RX0_RX_STATUS,
+			      &rx_status);
+	if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) !=
+	    (MDIO_RX0_RX_STATUS_SIGDET)) {
+		DP(NETIF_MSG_LINK, "Signal is not detected. Restoring CL73."
+			     "rx_status(0x80b0) = 0x%x\n", rx_status);
+		CL45_WR_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_CL73_IEEEB0,
+				      MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+				      MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN);
+		return;
+	}
+	/* Step 2: Check CL73 state machine */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_USERB0,
+			      MDIO_CL73_USERB0_CL73_USTAT1,
+			      &ustat_val);
+	if ((ustat_val &
+	     (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
+	      MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) !=
+	    (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
+	      MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) {
+		DP(NETIF_MSG_LINK, "CL73 state-machine is not stable. "
+			     "ustat_val(0x8371) = 0x%x\n", ustat_val);
+		return;
+	}
+	/* Step 3: Check CL37 Message Pages received to indicate LP
+	supports only CL37 */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_REMOTE_PHY,
+			      MDIO_REMOTE_PHY_MISC_RX_STATUS,
+			      &cl37_fsm_recieved);
+	if ((cl37_fsm_recieved &
+	     (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
+	     MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
+	    (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
+	      MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
+		DP(NETIF_MSG_LINK, "No CL37 FSM were received. "
+			     "misc_rx_status(0x8330) = 0x%x\n",
+			 cl37_fsm_recieved);
+		return;
+	}
+	/* The combined cl37/cl73 fsm state information indicating that we are
+	connected to a device which does not support cl73, but does support
+	cl37 BAM. In this case we disable cl73 and restart cl37 auto-neg */
+	/* Disable CL73 */
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB0,
+			      MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
+			      0);
+	/* Restart CL37 autoneg */
+	bnx2x_restart_autoneg(params, 0);
+	DP(NETIF_MSG_LINK, "Disabling CL73, and restarting CL37 autoneg\n");
+}
+static u8 bnx2x_link_settings_status(struct link_params *params,
+				   struct link_vars *vars,
+				   u32 gp_status,
+				   u8 ext_phy_link_up)
+{
+	struct bnx2x *bp = params->bp;
+	u16 new_line_speed;
+	u8 rc = 0;
+	vars->link_status = 0;
+
+	if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
+		DP(NETIF_MSG_LINK, "phy link up gp_status=0x%x\n",
+			 gp_status);
+
+		vars->phy_link_up = 1;
+		vars->link_status |= LINK_STATUS_LINK_UP;
+
+		if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
+			vars->duplex = DUPLEX_FULL;
+		else
+			vars->duplex = DUPLEX_HALF;
+
+		bnx2x_flow_ctrl_resolve(params, vars, gp_status);
+
+		switch (gp_status & GP_STATUS_SPEED_MASK) {
+		case GP_STATUS_10M:
+			new_line_speed = SPEED_10;
+			if (vars->duplex == DUPLEX_FULL)
+				vars->link_status |= LINK_10TFD;
+			else
+				vars->link_status |= LINK_10THD;
+			break;
+
+		case GP_STATUS_100M:
+			new_line_speed = SPEED_100;
+			if (vars->duplex == DUPLEX_FULL)
+				vars->link_status |= LINK_100TXFD;
+			else
+				vars->link_status |= LINK_100TXHD;
+			break;
+
+		case GP_STATUS_1G:
+		case GP_STATUS_1G_KX:
+			new_line_speed = SPEED_1000;
+			if (vars->duplex == DUPLEX_FULL)
+				vars->link_status |= LINK_1000TFD;
+			else
+				vars->link_status |= LINK_1000THD;
+			break;
+
+		case GP_STATUS_2_5G:
+			new_line_speed = SPEED_2500;
+			if (vars->duplex == DUPLEX_FULL)
+				vars->link_status |= LINK_2500TFD;
+			else
+				vars->link_status |= LINK_2500THD;
+			break;
+
+		case GP_STATUS_5G:
+		case GP_STATUS_6G:
+			DP(NETIF_MSG_LINK,
+				 "link speed unsupported  gp_status 0x%x\n",
+				  gp_status);
+			return -EINVAL;
+
+		case GP_STATUS_10G_KX4:
+		case GP_STATUS_10G_HIG:
+		case GP_STATUS_10G_CX4:
+			new_line_speed = SPEED_10000;
+			vars->link_status |= LINK_10GTFD;
+			break;
+
+		case GP_STATUS_12G_HIG:
+			new_line_speed = SPEED_12000;
+			vars->link_status |= LINK_12GTFD;
+			break;
+
+		case GP_STATUS_12_5G:
+			new_line_speed = SPEED_12500;
+			vars->link_status |= LINK_12_5GTFD;
+			break;
+
+		case GP_STATUS_13G:
+			new_line_speed = SPEED_13000;
+			vars->link_status |= LINK_13GTFD;
+			break;
+
+		case GP_STATUS_15G:
+			new_line_speed = SPEED_15000;
+			vars->link_status |= LINK_15GTFD;
+			break;
+
+		case GP_STATUS_16G:
+			new_line_speed = SPEED_16000;
+			vars->link_status |= LINK_16GTFD;
+			break;
+
+		default:
+			DP(NETIF_MSG_LINK,
+				  "link speed unsupported gp_status 0x%x\n",
+				  gp_status);
+			return -EINVAL;
+		}
+
+		/* Upon link speed change set the NIG into drain mode.
+		Comes to deals with possible FIFO glitch due to clk change
+		when speed is decreased without link down indicator */
+		if (new_line_speed != vars->line_speed) {
+			if (XGXS_EXT_PHY_TYPE(params->ext_phy_config) !=
+			     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT &&
+			    ext_phy_link_up) {
+				DP(NETIF_MSG_LINK, "Internal link speed %d is"
+					    " different than the external"
+					    " link speed %d\n", new_line_speed,
+					  vars->line_speed);
+				vars->phy_link_up = 0;
+				return 0;
+			}
+			REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+				    + params->port*4, 0);
+			msleep(1);
+		}
+		vars->line_speed = new_line_speed;
+		vars->link_status |= LINK_STATUS_SERDES_LINK;
+
+		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) {
+			vars->autoneg = AUTO_NEG_ENABLED;
+
+			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+				vars->autoneg |= AUTO_NEG_COMPLETE;
+				vars->link_status |=
+					LINK_STATUS_AUTO_NEGOTIATE_COMPLETE;
+			}
+
+			vars->autoneg |= AUTO_NEG_PARALLEL_DETECTION_USED;
+			vars->link_status |=
+				LINK_STATUS_PARALLEL_DETECTION_USED;
+
+		}
+		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+			vars->link_status |=
+				LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+
+		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+			vars->link_status |=
+				LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+
+	} else { /* link_down */
+		DP(NETIF_MSG_LINK, "phy link down\n");
+
+		vars->phy_link_up = 0;
+
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+		vars->autoneg = AUTO_NEG_DISABLED;
+		vars->mac_type = MAC_TYPE_NONE;
+
+		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT))) {
+			/* Check signal is detected */
+			bnx2x_check_fallback_to_cl37(params);
+		}
+	}
+
+	DP(NETIF_MSG_LINK, "gp_status 0x%x  phy_link_up %x line_speed %x\n",
+		 gp_status, vars->phy_link_up, vars->line_speed);
+	DP(NETIF_MSG_LINK, "duplex %x  flow_ctrl 0x%x"
+		 " autoneg 0x%x\n",
+		 vars->duplex,
+		 vars->flow_ctrl, vars->autoneg);
+	DP(NETIF_MSG_LINK, "link_status 0x%x\n", vars->link_status);
+
+	return rc;
+}
+
+static void bnx2x_set_gmii_tx_driver(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 lp_up2;
+	u16 tx_driver;
+	u16 bank;
+
+	/* read precomp */
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_OVER_1G,
+			      MDIO_OVER_1G_LP_UP2, &lp_up2);
+
+	/* bits [10:7] at lp_up2, positioned at [15:12] */
+	lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
+		   MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
+		  MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);
+
+	if (lp_up2 == 0)
+		return;
+
+	for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3;
+	      bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) {
+		CL45_RD_OVER_CL22(bp, params->port,
+				      params->phy_addr,
+				      bank,
+				      MDIO_TX0_TX_DRIVER, &tx_driver);
+
+		/* replace tx_driver bits [15:12] */
+		if (lp_up2 !=
+		    (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) {
+			tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
+			tx_driver |= lp_up2;
+			CL45_WR_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      bank,
+					      MDIO_TX0_TX_DRIVER, tx_driver);
+		}
+	}
+}
+
+static u8 bnx2x_emac_program(struct link_params *params,
+			   u32 line_speed, u32 duplex)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u16 mode = 0;
+
+	DP(NETIF_MSG_LINK, "setting link speed & duplex\n");
+	bnx2x_bits_dis(bp, GRCBASE_EMAC0 + port*0x400 +
+		     EMAC_REG_EMAC_MODE,
+		     (EMAC_MODE_25G_MODE |
+		     EMAC_MODE_PORT_MII_10M |
+		     EMAC_MODE_HALF_DUPLEX));
+	switch (line_speed) {
+	case SPEED_10:
+		mode |= EMAC_MODE_PORT_MII_10M;
+		break;
+
+	case SPEED_100:
+		mode |= EMAC_MODE_PORT_MII;
+		break;
+
+	case SPEED_1000:
+		mode |= EMAC_MODE_PORT_GMII;
+		break;
+
+	case SPEED_2500:
+		mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII);
+		break;
+
+	default:
+		/* 10G not valid for EMAC */
+		DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n", line_speed);
+		return -EINVAL;
+	}
+
+	if (duplex == DUPLEX_HALF)
+		mode |= EMAC_MODE_HALF_DUPLEX;
+	bnx2x_bits_en(bp,
+		    GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
+		    mode);
+
+	bnx2x_set_led(params, LED_MODE_OPER, line_speed);
+	return 0;
+}
+
+/*****************************************************************************/
+/*      		     External Phy section       		     */
+/*****************************************************************************/
+void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port)
+{
+	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+		       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+	msleep(1);
+	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+		      MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+}
+
+static void bnx2x_ext_phy_reset(struct link_params *params,
+			      struct link_vars   *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u32 ext_phy_type;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
+	DP(NETIF_MSG_LINK, "Port %x: bnx2x_ext_phy_reset\n", params->port);
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	/* The PHY reset is controled by GPIO 1
+	 * Give it 1ms of reset pulse
+	 */
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+			DP(NETIF_MSG_LINK, "XGXS Direct\n");
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+			DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
+
+			/* Restore normal power mode*/
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			/* HW reset */
+			bnx2x_ext_phy_hw_reset(bp, params->port);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 0xa040);
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+
+			/* Restore normal power mode*/
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+					  MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+					  MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL,
+				       1<<15);
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+			DP(NETIF_MSG_LINK, "XGXS 8072\n");
+
+			/* Unset Low Power Mode and SW reset */
+			/* Restore normal power mode*/
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL,
+				       1<<15);
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+			DP(NETIF_MSG_LINK, "XGXS 8073\n");
+
+			/* Restore normal power mode*/
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+			DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
+
+			/* Restore normal power mode*/
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			/* HW reset */
+			bnx2x_ext_phy_hw_reset(bp, params->port);
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+			/* Restore normal power mode*/
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
+
+			/* HW reset */
+			bnx2x_ext_phy_hw_reset(bp, params->port);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL,
+				       1<<15);
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+			DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n");
+			break;
+
+		default:
+			DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+			   params->ext_phy_config);
+			break;
+		}
+
+	} else { /* SerDes */
+		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
+			DP(NETIF_MSG_LINK, "SerDes Direct\n");
+			break;
+
+		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
+			DP(NETIF_MSG_LINK, "SerDes 5482\n");
+			bnx2x_ext_phy_hw_reset(bp, params->port);
+			break;
+
+		default:
+			DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
+				 params->ext_phy_config);
+			break;
+		}
+	}
+}
+
+static void bnx2x_save_spirom_version(struct bnx2x *bp, u8 port,
+				    u32 shmem_base, u32 spirom_ver)
+{
+	DP(NETIF_MSG_LINK, "FW version 0x%x:0x%x for port %d\n",
+		 (u16)(spirom_ver>>16), (u16)spirom_ver, port);
+	REG_WR(bp, shmem_base +
+		   offsetof(struct shmem_region,
+			    port_mb[port].ext_phy_fw_version),
+			spirom_ver);
+}
+
+static void bnx2x_save_bcm_spirom_ver(struct bnx2x *bp, u8 port,
+				    u32 ext_phy_type, u8 ext_phy_addr,
+				    u32 shmem_base)
+{
+	u16 fw_ver1, fw_ver2;
+
+	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr, MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2, &fw_ver2);
+	bnx2x_save_spirom_version(bp, port, shmem_base,
+				(u32)(fw_ver1<<16 | fw_ver2));
+}
+
+
+static void bnx2x_save_8481_spirom_version(struct bnx2x *bp, u8 port,
+					 u8 ext_phy_addr, u32 shmem_base)
+{
+	u16 val, fw_ver1, fw_ver2, cnt;
+	/* For the 32 bits registers in 8481, access via MDIO2ARM interface.*/
+	/* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr, MDIO_PMA_DEVAD,
+		       0xA819, 0x0014);
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       0xA81A,
+		       0xc200);
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       0xA81B,
+		       0x0000);
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       0xA81C,
+		       0x0300);
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       0xA817,
+		       0x0009);
+
+	for (cnt = 0; cnt < 100; cnt++) {
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      0xA818,
+			      &val);
+		if (val & 1)
+			break;
+		udelay(5);
+	}
+	if (cnt == 100) {
+		DP(NETIF_MSG_LINK, "Unable to read 8481 phy fw version(1)\n");
+		bnx2x_save_spirom_version(bp, port,
+					shmem_base, 0);
+		return;
+	}
+
+
+	/* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr, MDIO_PMA_DEVAD,
+		       0xA819, 0x0000);
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr, MDIO_PMA_DEVAD,
+		       0xA81A, 0xc200);
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		       ext_phy_addr, MDIO_PMA_DEVAD,
+		       0xA817, 0x000A);
+	for (cnt = 0; cnt < 100; cnt++) {
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      0xA818,
+			      &val);
+		if (val & 1)
+			break;
+		udelay(5);
+	}
+	if (cnt == 100) {
+		DP(NETIF_MSG_LINK, "Unable to read 8481 phy fw version(2)\n");
+		bnx2x_save_spirom_version(bp, port,
+					shmem_base, 0);
+		return;
+	}
+
+	/* lower 16 bits of the register SPI_FW_STATUS */
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      0xA81B,
+		      &fw_ver1);
+	/* upper 16 bits of register SPI_FW_STATUS */
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      0xA81C,
+		      &fw_ver2);
+
+	bnx2x_save_spirom_version(bp, port,
+				shmem_base, (fw_ver2<<16) | fw_ver1);
+}
+
+static void bnx2x_bcm8072_external_rom_boot(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Need to wait 200ms after reset */
+	msleep(200);
+	/* Boot port from external ROM
+	 * Set ser_boot_ctl bit in the MISC_CTRL1 register
+	 */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+			    MDIO_PMA_DEVAD,
+			    MDIO_PMA_REG_MISC_CTRL1, 0x0001);
+
+	/* Reset internal microprocessor */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+			  MDIO_PMA_DEVAD,
+			  MDIO_PMA_REG_GEN_CTRL,
+			  MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
+	/* set micro reset = 0 */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+			    MDIO_PMA_DEVAD,
+			    MDIO_PMA_REG_GEN_CTRL,
+			    MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
+	/* Reset internal microprocessor */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+			  MDIO_PMA_DEVAD,
+			  MDIO_PMA_REG_GEN_CTRL,
+			  MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
+	/* wait for 100ms for code download via SPI port */
+	msleep(100);
+
+	/* Clear ser_boot_ctl bit */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+			    MDIO_PMA_DEVAD,
+			    MDIO_PMA_REG_MISC_CTRL1, 0x0000);
+	/* Wait 100ms */
+	msleep(100);
+
+	bnx2x_save_bcm_spirom_ver(bp, port,
+				ext_phy_type,
+				ext_phy_addr,
+				params->shmem_base);
+}
+
+static u8 bnx2x_8073_is_snr_needed(struct link_params *params)
+{
+	/* This is only required for 8073A1, version 102 only */
+
+	struct bnx2x *bp = params->bp;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u16 val;
+
+	/* Read 8073 HW revision*/
+	bnx2x_cl45_read(bp, params->port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_8073_CHIP_REV, &val);
+
+	if (val != 1) {
+		/* No need to workaround in 8073 A1 */
+		return 0;
+	}
+
+	bnx2x_cl45_read(bp, params->port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2, &val);
+
+	/* SNR should be applied only for version 0x102 */
+	if (val != 0x102)
+		return 0;
+
+	return 1;
+}
+
+static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u16 val, cnt, cnt1 ;
+
+	bnx2x_cl45_read(bp, params->port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_8073_CHIP_REV, &val);
+
+	if (val > 0) {
+		/* No need to workaround in 8073 A1 */
+		return 0;
+	}
+	/* XAUI workaround in 8073 A0: */
+
+	/* After loading the boot ROM and restarting Autoneg,
+	poll Dev1, Reg $C820: */
+
+	for (cnt = 0; cnt < 1000; cnt++) {
+		bnx2x_cl45_read(bp, params->port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+			      &val);
+		  /* If bit [14] = 0 or bit [13] = 0, continue on with
+		   system initialization (XAUI work-around not required,
+		    as these bits indicate 2.5G or 1G link up). */
+		if (!(val & (1<<14)) || !(val & (1<<13))) {
+			DP(NETIF_MSG_LINK, "XAUI work-around not required\n");
+			return 0;
+		} else if (!(val & (1<<15))) {
+			DP(NETIF_MSG_LINK, "clc bit 15 went off\n");
+			 /* If bit 15 is 0, then poll Dev1, Reg $C841 until
+			  it's MSB (bit 15) goes to 1 (indicating that the
+			  XAUI workaround has completed),
+			  then continue on with system initialization.*/
+			for (cnt1 = 0; cnt1 < 1000; cnt1++) {
+				bnx2x_cl45_read(bp, params->port,
+					PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+					ext_phy_addr,
+					MDIO_PMA_DEVAD,
+					MDIO_PMA_REG_8073_XAUI_WA, &val);
+				if (val & (1<<15)) {
+					DP(NETIF_MSG_LINK,
+					  "XAUI workaround has completed\n");
+					return 0;
+				 }
+				 msleep(3);
+			}
+			break;
+		}
+		msleep(3);
+	}
+	DP(NETIF_MSG_LINK, "Warning: XAUI work-around timeout !!!\n");
+	return -EINVAL;
+}
+
+static void bnx2x_bcm8073_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port,
+						  u8 ext_phy_addr,
+						  u32 ext_phy_type,
+						  u32 shmem_base)
+{
+	/* Boot port from external ROM  */
+	/* EDC grst */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       0x0001);
+
+	/* ucode reboot and rst */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       0x008c);
+
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
+
+	/* Reset internal microprocessor */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
+
+	/* Release srst bit */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
+
+	/* wait for 100ms for code download via SPI port */
+	msleep(100);
+
+	/* Clear ser_boot_ctl bit */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_MISC_CTRL1, 0x0000);
+
+	bnx2x_save_bcm_spirom_ver(bp, port,
+				ext_phy_type,
+				ext_phy_addr,
+				shmem_base);
+}
+
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+					  u8 ext_phy_addr,
+					  u32 shmem_base)
+{
+	bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr,
+					 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+					 shmem_base);
+}
+
+static void bnx2x_bcm8727_external_rom_boot(struct bnx2x *bp, u8 port,
+					  u8 ext_phy_addr,
+					  u32 shmem_base)
+{
+	bnx2x_bcm8073_bcm8727_external_rom_boot(bp, port, ext_phy_addr,
+					 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+					 shmem_base);
+
+}
+
+static void bnx2x_bcm8726_external_rom_boot(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Need to wait 100ms after reset */
+	msleep(100);
+
+	/* Micro controller re-boot */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       0x018B);
+
+	/* Set soft reset */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
+
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
+
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL,
+		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
+
+	/* wait for 150ms for microcode load */
+	msleep(150);
+
+	/* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_MISC_CTRL1, 0x0000);
+
+	msleep(200);
+	bnx2x_save_bcm_spirom_ver(bp, port,
+				ext_phy_type,
+				ext_phy_addr,
+				params->shmem_base);
+}
+
+static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, u8 port,
+				    u32 ext_phy_type, u8 ext_phy_addr,
+				    u8 tx_en)
+{
+	u16 val;
+
+	DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n",
+		 tx_en, port);
+	/* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/
+	bnx2x_cl45_read(bp, port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_PHY_IDENTIFIER,
+		      &val);
+
+	if (tx_en)
+		val &= ~(1<<15);
+	else
+		val |= (1<<15);
+
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_PHY_IDENTIFIER,
+		       val);
+}
+
+static u8 bnx2x_8726_read_sfp_module_eeprom(struct link_params *params,
+					  u16 addr, u8 byte_cnt, u8 *o_buf)
+{
+	struct bnx2x *bp = params->bp;
+	u16 val = 0;
+	u16 i;
+	u8 port = params->port;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	if (byte_cnt > 16) {
+		DP(NETIF_MSG_LINK, "Reading from eeprom is"
+			    " is limited to 0xf\n");
+		return -EINVAL;
+	}
+	/* Set the read command byte count */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT,
+		       (byte_cnt | 0xa000));
+
+	/* Set the read command address */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR,
+		       addr);
+
+	/* Activate read command */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+		       0x2c0f);
+
+	/* Wait up to 500us for command complete status */
+	for (i = 0; i < 100; i++) {
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+		if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE)
+			break;
+		udelay(5);
+	}
+
+	if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
+		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
+		DP(NETIF_MSG_LINK,
+			 "Got bad status 0x%x when reading from SFP+ EEPROM\n",
+			 (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
+		return -EINVAL;
+	}
+
+	/* Read the buffer */
+	for (i = 0; i < byte_cnt; i++) {
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val);
+		o_buf[i] = (u8)(val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK);
+	}
+
+	for (i = 0; i < 100; i++) {
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+		if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
+			return 0;;
+		msleep(1);
+	}
+	return -EINVAL;
+}
+
+static u8 bnx2x_8727_read_sfp_module_eeprom(struct link_params *params,
+					  u16 addr, u8 byte_cnt, u8 *o_buf)
+{
+	struct bnx2x *bp = params->bp;
+	u16 val, i;
+	u8 port = params->port;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	if (byte_cnt > 16) {
+		DP(NETIF_MSG_LINK, "Reading from eeprom is"
+			    " is limited to 0xf\n");
+		return -EINVAL;
+	}
+
+	/* Need to read from 1.8000 to clear it */
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+		      &val);
+
+	/* Set the read command byte count */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT,
+		       ((byte_cnt < 2) ? 2 : byte_cnt));
+
+	/* Set the read command address */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR,
+		       addr);
+	/* Set the destination address */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       0x8004,
+		       MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF);
+
+	/* Activate read command */
+	bnx2x_cl45_write(bp, port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
+		       0x8002);
+	/* Wait appropriate time for two-wire command to finish before
+	polling the status register */
+	msleep(1);
+
+	/* Wait up to 500us for command complete status */
+	for (i = 0; i < 100; i++) {
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+		if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE)
+			break;
+		udelay(5);
+	}
+
+	if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
+		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
+		DP(NETIF_MSG_LINK,
+			 "Got bad status 0x%x when reading from SFP+ EEPROM\n",
+			 (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
+		return -EINVAL;
+	}
+
+	/* Read the buffer */
+	for (i = 0; i < byte_cnt; i++) {
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val);
+		o_buf[i] = (u8)(val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK);
+	}
+
+	for (i = 0; i < 100; i++) {
+		bnx2x_cl45_read(bp, port,
+			      ext_phy_type,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
+		if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
+		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
+			return 0;;
+		msleep(1);
+	}
+
+	return -EINVAL;
+}
+
+u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
+				     u8 byte_cnt, u8 *o_buf)
+{
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726)
+		return bnx2x_8726_read_sfp_module_eeprom(params, addr,
+						       byte_cnt, o_buf);
+	else if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727)
+		return bnx2x_8727_read_sfp_module_eeprom(params, addr,
+						       byte_cnt, o_buf);
+	return -EINVAL;
+}
+
+static u8 bnx2x_get_edc_mode(struct link_params *params,
+				  u16 *edc_mode)
+{
+	struct bnx2x *bp = params->bp;
+	u8 val, check_limiting_mode = 0;
+	*edc_mode = EDC_MODE_LIMITING;
+
+	/* First check for copper cable */
+	if (bnx2x_read_sfp_module_eeprom(params,
+				       SFP_EEPROM_CON_TYPE_ADDR,
+				       1,
+				       &val) != 0) {
+		DP(NETIF_MSG_LINK, "Failed to read from SFP+ module EEPROM\n");
+		return -EINVAL;
+	}
+
+	switch (val) {
+	case SFP_EEPROM_CON_TYPE_VAL_COPPER:
+	{
+		u8 copper_module_type;
+
+		/* Check if its active cable( includes SFP+ module)
+		of passive cable*/
+		if (bnx2x_read_sfp_module_eeprom(params,
+					       SFP_EEPROM_FC_TX_TECH_ADDR,
+					       1,
+					       &copper_module_type) !=
+		    0) {
+			DP(NETIF_MSG_LINK,
+				"Failed to read copper-cable-type"
+				" from SFP+ EEPROM\n");
+			return -EINVAL;
+		}
+
+		if (copper_module_type &
+		    SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
+			DP(NETIF_MSG_LINK, "Active Copper cable detected\n");
+			check_limiting_mode = 1;
+		} else if (copper_module_type &
+			SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
+				DP(NETIF_MSG_LINK, "Passive Copper"
+					    " cable detected\n");
+				*edc_mode =
+				      EDC_MODE_PASSIVE_DAC;
+		} else {
+			DP(NETIF_MSG_LINK, "Unknown copper-cable-"
+				     "type 0x%x !!!\n", copper_module_type);
+			return -EINVAL;
+		}
+		break;
+	}
+	case SFP_EEPROM_CON_TYPE_VAL_LC:
+		DP(NETIF_MSG_LINK, "Optic module detected\n");
+		check_limiting_mode = 1;
+		break;
+	default:
+		DP(NETIF_MSG_LINK, "Unable to determine module type 0x%x !!!\n",
+			 val);
+		return -EINVAL;
+	}
+
+	if (check_limiting_mode) {
+		u8 options[SFP_EEPROM_OPTIONS_SIZE];
+		if (bnx2x_read_sfp_module_eeprom(params,
+					       SFP_EEPROM_OPTIONS_ADDR,
+					       SFP_EEPROM_OPTIONS_SIZE,
+					       options) != 0) {
+			DP(NETIF_MSG_LINK, "Failed to read Option"
+				" field from module EEPROM\n");
+			return -EINVAL;
+		}
+		if ((options[0] & SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK))
+			*edc_mode = EDC_MODE_LINEAR;
+		else
+			*edc_mode = EDC_MODE_LIMITING;
+	}
+	DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode);
+	return 0;
+}
+
+/* This function read the relevant field from the module ( SFP+ ),
+	and verify it is compliant with this board */
+static u8 bnx2x_verify_sfp_module(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u32 val;
+	u32 fw_resp;
+	char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1];
+	char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1];
+
+	val = REG_RD(bp, params->shmem_base +
+			 offsetof(struct shmem_region, dev_info.
+				  port_feature_config[params->port].config));
+	if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+	    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) {
+		DP(NETIF_MSG_LINK, "NOT enforcing module verification\n");
+		return 0;
+	}
+
+	/* Ask the FW to validate the module */
+	if (!(params->feature_config_flags &
+	      FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY)) {
+		DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
+			    "verification\n");
+		return -EINVAL;
+	}
+
+	fw_resp = bnx2x_fw_command(bp, DRV_MSG_CODE_VRFY_OPT_MDL);
+	if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) {
+		DP(NETIF_MSG_LINK, "Approved module\n");
+		return 0;
+	}
+
+	/* format the warning message */
+	if (bnx2x_read_sfp_module_eeprom(params,
+				       SFP_EEPROM_VENDOR_NAME_ADDR,
+				       SFP_EEPROM_VENDOR_NAME_SIZE,
+				       (u8 *)vendor_name))
+		vendor_name[0] = '\0';
+	else
+		vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0';
+	if (bnx2x_read_sfp_module_eeprom(params,
+				       SFP_EEPROM_PART_NO_ADDR,
+				       SFP_EEPROM_PART_NO_SIZE,
+				       (u8 *)vendor_pn))
+		vendor_pn[0] = '\0';
+	else
+		vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0';
+
+	netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected, Port %d from %s part number %s\n",
+		    params->port, vendor_name, vendor_pn);
+	return -EINVAL;
+}
+
+static u8 bnx2x_bcm8726_set_limiting_mode(struct link_params *params,
+					u16 edc_mode)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u16 cur_limiting_mode;
+
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2,
+		      &cur_limiting_mode);
+	DP(NETIF_MSG_LINK, "Current Limiting mode is 0x%x\n",
+		 cur_limiting_mode);
+
+	if (edc_mode == EDC_MODE_LIMITING) {
+		DP(NETIF_MSG_LINK,
+			 "Setting LIMITING MODE\n");
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+			       ext_phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_ROM_VER2,
+			       EDC_MODE_LIMITING);
+	} else { /* LRM mode ( default )*/
+
+		DP(NETIF_MSG_LINK, "Setting LRM MODE\n");
+
+		/* Changing to LRM mode takes quite few seconds.
+		So do it only if current mode is limiting
+		( default is LRM )*/
+		if (cur_limiting_mode != EDC_MODE_LIMITING)
+			return 0;
+
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+			       ext_phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_LRM_MODE,
+			       0);
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+			       ext_phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_ROM_VER2,
+			       0x128);
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+			       ext_phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_MISC_CTRL0,
+			       0x4008);
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
+			       ext_phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_LRM_MODE,
+			       0xaaaa);
+	}
+	return 0;
+}
+
+static u8 bnx2x_bcm8727_set_limiting_mode(struct link_params *params,
+					u16 edc_mode)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u16 phy_identifier;
+	u16 rom_ver2_val;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
+	bnx2x_cl45_read(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_PHY_IDENTIFIER,
+		       &phy_identifier);
+
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_PHY_IDENTIFIER,
+		       (phy_identifier & ~(1<<9)));
+
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2,
+		      &rom_ver2_val);
+	/* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_ROM_VER2,
+		       (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff));
+
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_PHY_IDENTIFIER,
+		       (phy_identifier | (1<<9)));
+
+	return 0;
+}
+
+
+static u8 bnx2x_wait_for_sfp_module_initialized(struct link_params *params)
+{
+	u8 val;
+	struct bnx2x *bp = params->bp;
+	u16 timeout;
+	/* Initialization time after hot-plug may take up to 300ms for some
+	phys type ( e.g. JDSU ) */
+	for (timeout = 0; timeout < 60; timeout++) {
+		if (bnx2x_read_sfp_module_eeprom(params, 1, 1, &val)
+		    == 0) {
+			DP(NETIF_MSG_LINK, "SFP+ module initialization "
+				     "took %d ms\n", timeout * 5);
+			return 0;
+		}
+		msleep(5);
+	}
+	return -EINVAL;
+}
+
+static void bnx2x_8727_power_module(struct bnx2x *bp,
+				  struct link_params *params,
+				  u8 ext_phy_addr, u8 is_power_up) {
+	/* Make sure GPIOs are not using for LED mode */
+	u16 val;
+	u8 port = params->port;
+	/*
+	 * In the GPIO register, bit 4 is use to detemine if the GPIOs are
+	 * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for
+	 * output
+	 * Bits 0-1 determine the gpios value for OUTPUT in case bit 4 val is 0
+	 * Bits 8-9 determine the gpios value for INPUT in case bit 4 val is 1
+	 * where the 1st bit is the over-current(only input), and 2nd bit is
+	 * for power( only output )
+	*/
+
+	/*
+	 * In case of NOC feature is disabled and power is up, set GPIO control
+	 *  as input to enable listening of over-current indication
+	 */
+
+	if (!(params->feature_config_flags &
+	      FEATURE_CONFIG_BCM8727_NOC) && is_power_up)
+		val = (1<<4);
+	else
+		/*
+		 * Set GPIO control to OUTPUT, and set the power bit
+		 * to according to the is_power_up
+		 */
+		val = ((!(is_power_up)) << 1);
+
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8727_GPIO_CTRL,
+		       val);
+}
+
+static u8 bnx2x_sfp_module_detection(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 edc_mode;
+	u8 rc = 0;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	u32 val = REG_RD(bp, params->shmem_base +
+			     offsetof(struct shmem_region, dev_info.
+				     port_feature_config[params->port].config));
+
+	DP(NETIF_MSG_LINK, "SFP+ module plugged in/out detected on port %d\n",
+		 params->port);
+
+	if (bnx2x_get_edc_mode(params, &edc_mode) != 0) {
+		DP(NETIF_MSG_LINK, "Failed to get valid module type\n");
+		return -EINVAL;
+	} else if (bnx2x_verify_sfp_module(params) !=
+		   0) {
+		/* check SFP+ module compatibility */
+		DP(NETIF_MSG_LINK, "Module verification failed!!\n");
+		rc = -EINVAL;
+		/* Turn on fault module-detected led */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+				  MISC_REGISTERS_GPIO_HIGH,
+				  params->port);
+		if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) &&
+		    ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+		     PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN)) {
+			/* Shutdown SFP+ module */
+			DP(NETIF_MSG_LINK, "Shutdown SFP+ module!!\n");
+			bnx2x_8727_power_module(bp, params,
+					      ext_phy_addr, 0);
+			return rc;
+		}
+	} else {
+		/* Turn off fault module-detected led */
+		DP(NETIF_MSG_LINK, "Turn off fault module-detected led\n");
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+					  MISC_REGISTERS_GPIO_LOW,
+					  params->port);
+	}
+
+	/* power up the SFP module */
+	if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727)
+		bnx2x_8727_power_module(bp, params, ext_phy_addr, 1);
+
+	/* Check and set limiting mode / LRM mode on 8726.
+	On 8727 it is done automatically */
+	if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726)
+		bnx2x_bcm8726_set_limiting_mode(params, edc_mode);
+	else
+		bnx2x_bcm8727_set_limiting_mode(params, edc_mode);
+	/*
+	 * Enable transmit for this module if the module is approved, or
+	 * if unapproved modules should also enable the Tx laser
+	 */
+	if (rc == 0 ||
+	    (val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) !=
+	    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+		bnx2x_sfp_set_transmitter(bp, params->port,
+					ext_phy_type, ext_phy_addr, 1);
+	else
+		bnx2x_sfp_set_transmitter(bp, params->port,
+					ext_phy_type, ext_phy_addr, 0);
+
+	return rc;
+}
+
+void bnx2x_handle_module_detect_int(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u32 gpio_val;
+	u8 port = params->port;
+
+	/* Set valid module led off */
+	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  params->port);
+
+	/* Get current gpio val refelecting module plugged in / out*/
+	gpio_val = bnx2x_get_gpio(bp,  MISC_REGISTERS_GPIO_3, port);
+
+	/* Call the handling function in case module is detected */
+	if (gpio_val == 0) {
+
+		bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3,
+				      MISC_REGISTERS_GPIO_INT_OUTPUT_CLR,
+				      port);
+
+		if (bnx2x_wait_for_sfp_module_initialized(params) ==
+		    0)
+			bnx2x_sfp_module_detection(params);
+		else
+			DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");
+	} else {
+		u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
+		u32 ext_phy_type =
+			XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+		u32 val = REG_RD(bp, params->shmem_base +
+				     offsetof(struct shmem_region, dev_info.
+					      port_feature_config[params->port].
+					      config));
+
+		bnx2x_set_gpio_int(bp, MISC_REGISTERS_GPIO_3,
+				      MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
+				      port);
+		/* Module was plugged out. */
+		/* Disable transmit for this module */
+		if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+		    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+			bnx2x_sfp_set_transmitter(bp, params->port,
+						ext_phy_type, ext_phy_addr, 0);
+	}
+}
+
+static void bnx2x_bcm807x_force_10G(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Force KR or KX */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_CTRL,
+		       0x2040);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_10G_CTRL2,
+		       0x000b);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_BCM_CTRL,
+		       0x0000);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_CTRL,
+		       0x0000);
+}
+
+static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u16 val;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	bnx2x_cl45_read(bp, params->port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_8073_CHIP_REV, &val);
+
+	if (val == 0) {
+		/* Mustn't set low power mode in 8073 A0 */
+		return;
+	}
+
+	/* Disable PLL sequencer (use read-modify-write to clear bit 13) */
+	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD,
+		       MDIO_XS_PLL_SEQUENCER, &val);
+	val &= ~(1<<13);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
+
+	/* PLL controls */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x805E, 0x1077);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x805D, 0x0000);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x805C, 0x030B);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x805B, 0x1240);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x805A, 0x2490);
+
+	/* Tx Controls */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x80A7, 0x0C74);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x80A6, 0x9041);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x80A5, 0x4640);
+
+	/* Rx Controls */
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x80FE, 0x01C4);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x80FD, 0x9249);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, 0x80FC, 0x2015);
+
+	/* Enable PLL sequencer  (use read-modify-write to set bit 13) */
+	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD,
+		       MDIO_XS_PLL_SEQUENCER, &val);
+	val |= (1<<13);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
+}
+
+static void bnx2x_8073_set_pause_cl37(struct link_params *params,
+				  struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u16 cl37_val;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	bnx2x_cl45_read(bp, params->port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_CL37_FC_LD, &cl37_val);
+
+	cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+		cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	}
+	DP(NETIF_MSG_LINK,
+		 "Ext phy AN advertize cl37 0x%x\n", cl37_val);
+
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_CL37_FC_LD, cl37_val);
+	msleep(500);
+}
+
+static void bnx2x_ext_phy_set_pause(struct link_params *params,
+				  struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u16 val;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* read modify write pause advertizing */
+	bnx2x_cl45_read(bp, params->port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_ADV_PAUSE, &val);
+
+	val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
+	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+		val |=  MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+		val |=
+		 MDIO_AN_REG_ADV_PAUSE_PAUSE;
+	}
+	DP(NETIF_MSG_LINK,
+		 "Ext phy AN advertize 0x%x\n", val);
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_ADV_PAUSE, val);
+}
+static void bnx2x_set_preemphasis(struct link_params *params)
+{
+	u16 bank, i = 0;
+	struct bnx2x *bp = params->bp;
+
+	for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3;
+	      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) {
+			CL45_WR_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      bank,
+					      MDIO_RX0_RX_EQ_BOOST,
+					      params->xgxs_config_rx[i]);
+	}
+
+	for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3;
+		      bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) {
+			CL45_WR_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      bank,
+					      MDIO_TX0_TX_DRIVER,
+					      params->xgxs_config_tx[i]);
+	}
+}
+
+
+static void bnx2x_8481_set_led4(struct link_params *params,
+			      u32 ext_phy_type, u8 ext_phy_addr)
+{
+	struct bnx2x *bp = params->bp;
+
+	/* PHYC_CTL_LED_CTL */
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_LINK_SIGNAL, 0xa482);
+
+	/* Unmask LED4 for 10G link */
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_SIGNAL_MASK, (1<<6));
+	/* 'Interrupt Mask' */
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       0xFFFB, 0xFFFD);
+}
+static void bnx2x_8481_set_legacy_led_mode(struct link_params *params,
+					 u32 ext_phy_type, u8 ext_phy_addr)
+{
+	struct bnx2x *bp = params->bp;
+
+	/* LED1 (10G Link): Disable LED1 when 10/100/1000 link */
+	/* LED2 (1G/100/10 Link): Enable LED2 when 10/100/1000 link) */
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_8481_LEGACY_SHADOW,
+		       (1<<15) | (0xd << 10) | (0xc<<4) | 0xe);
+}
+
+static void bnx2x_8481_set_10G_led_mode(struct link_params *params,
+				      u32 ext_phy_type, u8 ext_phy_addr)
+{
+	struct bnx2x *bp = params->bp;
+	u16 val1;
+
+	/* LED1 (10G Link) */
+	/* Enable continuse based on source 7(10G-link) */
+	bnx2x_cl45_read(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_LINK_SIGNAL,
+		       &val1);
+	/* Set bit 2 to 0, and bits [1:0] to 10 */
+	val1 &= ~((1<<0) | (1<<2) | (1<<7)); /* Clear bits 0,2,7*/
+	val1 |= ((1<<1) | (1<<6)); /* Set bit 1, 6 */
+
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_LINK_SIGNAL,
+		       val1);
+
+	/* Unmask LED1 for 10G link */
+	bnx2x_cl45_read(bp, params->port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_8481_LED1_MASK,
+		      &val1);
+	/* Set bit 2 to 0, and bits [1:0] to 10 */
+	val1 |= (1<<7);
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_LED1_MASK,
+		       val1);
+
+	/* LED2 (1G/100/10G Link) */
+	/* Mask LED2 for 10G link */
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_LED2_MASK,
+		       0);
+
+	/* Unmask LED3 for 10G link */
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_8481_LED3_MASK,
+		       0x6);
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_8481_LED3_BLINK,
+		       0);
+}
+
+
+static void bnx2x_init_internal_phy(struct link_params *params,
+				  struct link_vars *vars,
+				  u8 enable_cl73)
+{
+	struct bnx2x *bp = params->bp;
+
+	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
+		if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+		    (params->feature_config_flags &
+		     FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED))
+			bnx2x_set_preemphasis(params);
+
+		/* forced speed requested? */
+		if (vars->line_speed != SPEED_AUTO_NEG ||
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+			  params->loopback_mode == LOOPBACK_EXT)) {
+			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
+
+			/* disable autoneg */
+			bnx2x_set_autoneg(params, vars, 0);
+
+			/* program speed and duplex */
+			bnx2x_program_serdes(params, vars);
+
+		} else { /* AN_mode */
+			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
+
+			/* AN enabled */
+			bnx2x_set_brcm_cl37_advertisment(params);
+
+			/* program duplex & pause advertisement (for aneg) */
+			bnx2x_set_ieee_aneg_advertisment(params,
+						       vars->ieee_fc);
+
+			/* enable autoneg */
+			bnx2x_set_autoneg(params, vars, enable_cl73);
+
+			/* enable and restart AN */
+			bnx2x_restart_autoneg(params, enable_cl73);
+		}
+
+	} else { /* SGMII mode */
+		DP(NETIF_MSG_LINK, "SGMII\n");
+
+		bnx2x_initialize_sgmii_process(params, vars);
+	}
+}
+
+static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u32 ext_phy_type;
+	u8 ext_phy_addr;
+	u16 cnt;
+	u16 ctrl = 0;
+	u16 val = 0;
+	u8 rc = 0;
+
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+		ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+
+		ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+		/* Make sure that the soft reset is off (expect for the 8072:
+		 * due to the lock, it will be done inside the specific
+		 * handling)
+		 */
+		if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+		    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+		   (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
+		    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) &&
+		    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073)) {
+			/* Wait for soft reset to get cleared upto 1 sec */
+			for (cnt = 0; cnt < 1000; cnt++) {
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_PMA_DEVAD,
+					      MDIO_PMA_REG_CTRL, &ctrl);
+				if (!(ctrl & (1<<15)))
+					break;
+				msleep(1);
+			}
+			DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n",
+				 ctrl, cnt);
+		}
+
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+			DP(NETIF_MSG_LINK, "XGXS 8705\n");
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_MISC_CTRL,
+				       0x8288);
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_PHY_IDENTIFIER,
+				       0x7fbf);
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CMU_PLL_BYPASS,
+				       0x0100);
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_WIS_DEVAD,
+				       MDIO_WIS_REG_LASI_CNTL, 0x1);
+
+			/* BCM8705 doesn't have microcode, hence the 0 */
+			bnx2x_save_spirom_version(bp, params->port,
+						params->shmem_base, 0);
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+			/* Wait until fw is loaded */
+			for (cnt = 0; cnt < 100; cnt++) {
+				bnx2x_cl45_read(bp, params->port, ext_phy_type,
+					      ext_phy_addr, MDIO_PMA_DEVAD,
+					      MDIO_PMA_REG_ROM_VER1, &val);
+				if (val)
+					break;
+				msleep(10);
+			}
+			DP(NETIF_MSG_LINK, "XGXS 8706 is initialized "
+				"after %d ms\n", cnt);
+			if ((params->feature_config_flags &
+			     FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
+				u8 i;
+				u16 reg;
+				for (i = 0; i < 4; i++) {
+					reg = MDIO_XS_8706_REG_BANK_RX0 +
+						i*(MDIO_XS_8706_REG_BANK_RX1 -
+						   MDIO_XS_8706_REG_BANK_RX0);
+					bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_XS_DEVAD,
+						      reg, &val);
+					/* Clear first 3 bits of the control */
+					val &= ~0x7;
+					/* Set control bits according to
+					configuation */
+					val |= (params->xgxs_config_rx[i] &
+						0x7);
+					DP(NETIF_MSG_LINK, "Setting RX"
+						 "Equalizer to BCM8706 reg 0x%x"
+						 " <-- val 0x%x\n", reg, val);
+					bnx2x_cl45_write(bp, params->port,
+						       ext_phy_type,
+						       ext_phy_addr,
+						       MDIO_XS_DEVAD,
+						       reg, val);
+				}
+			}
+			/* Force speed */
+			if (params->req_line_speed == SPEED_10000) {
+				DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_DIGITAL_CTRL,
+					       0x400);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 1);
+			} else {
+				/* Force 1Gbps using autoneg with 1G
+				advertisment */
+
+				/* Allow CL37 through CL73 */
+				DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_CL73,
+					       0x040c);
+
+				/* Enable Full-Duplex advertisment on CL37 */
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_FC_LP,
+					       0x0020);
+				/* Enable CL37 AN */
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_AN,
+					       0x1000);
+				/* 1G support */
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_ADV, (1<<5));
+
+				/* Enable clause 73 AN */
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CTRL,
+					       0x1200);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_RX_ALARM_CTRL,
+					       0x0400);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 0x0004);
+
+			}
+			bnx2x_save_bcm_spirom_ver(bp, params->port,
+						ext_phy_type,
+						ext_phy_addr,
+						params->shmem_base);
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+			DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
+			bnx2x_bcm8726_external_rom_boot(params);
+
+			/* Need to call module detected on initialization since
+			the module detection triggered by actual module
+			insertion might occur before driver is loaded, and when
+			driver is loaded, it reset all registers, including the
+			transmitter */
+			bnx2x_sfp_module_detection(params);
+
+			/* Set Flow control */
+			bnx2x_ext_phy_set_pause(params, vars);
+			if (params->req_line_speed == SPEED_1000) {
+				DP(NETIF_MSG_LINK, "Setting 1G force\n");
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_CTRL, 0x40);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_10G_CTRL2, 0xD);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 0x5);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_RX_ALARM_CTRL,
+					       0x400);
+			} else if ((params->req_line_speed ==
+				    SPEED_AUTO_NEG) &&
+				   ((params->speed_cap_mask &
+				     PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
+				DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_ADV, 0x20);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_CL73, 0x040c);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_FC_LD, 0x0020);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_AN, 0x1000);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CTRL, 0x1200);
+
+				/* Enable RX-ALARM control to receive
+				interrupt for 1G speed change */
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 0x4);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_RX_ALARM_CTRL,
+					       0x400);
+
+			} else { /* Default 10G. Set only LASI control */
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 1);
+			}
+
+			/* Set TX PreEmphasis if needed */
+			if ((params->feature_config_flags &
+			     FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
+				DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
+					 "TX_CTRL2 0x%x\n",
+					 params->xgxs_config_tx[0],
+					 params->xgxs_config_tx[1]);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_8726_TX_CTRL1,
+					       params->xgxs_config_tx[0]);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_8726_TX_CTRL2,
+					       params->xgxs_config_tx[1]);
+			}
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+		{
+			u16 tmp1;
+			u16 rx_alarm_ctrl_val;
+			u16 lasi_ctrl_val;
+			if (ext_phy_type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
+				rx_alarm_ctrl_val = 0x400;
+				lasi_ctrl_val = 0x0004;
+			} else {
+				rx_alarm_ctrl_val = (1<<2);
+				lasi_ctrl_val = 0x0004;
+			}
+
+			/* enable LASI */
+			bnx2x_cl45_write(bp, params->port,
+				   ext_phy_type,
+				   ext_phy_addr,
+				   MDIO_PMA_DEVAD,
+				   MDIO_PMA_REG_RX_ALARM_CTRL,
+				   rx_alarm_ctrl_val);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_LASI_CTRL,
+				       lasi_ctrl_val);
+
+			bnx2x_8073_set_pause_cl37(params, vars);
+
+			if (ext_phy_type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)
+				bnx2x_bcm8072_external_rom_boot(params);
+			else
+				/* In case of 8073 with long xaui lines,
+				don't set the 8073 xaui low power*/
+				bnx2x_bcm8073_set_xaui_low_power_mode(params);
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_M8051_MSGOUT_REG,
+				      &tmp1);
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_RX_ALARM, &tmp1);
+
+			DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1):"
+					     "0x%x\n", tmp1);
+
+			/* If this is forced speed, set to KR or KX
+			 * (all other are not supported)
+			 */
+			if (params->loopback_mode == LOOPBACK_EXT) {
+				bnx2x_bcm807x_force_10G(params);
+				DP(NETIF_MSG_LINK,
+					"Forced speed 10G on 807X\n");
+				break;
+			} else {
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type, ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_BCM_CTRL,
+					       0x0002);
+			}
+			if (params->req_line_speed != SPEED_AUTO_NEG) {
+				if (params->req_line_speed == SPEED_10000) {
+					val = (1<<7);
+				} else if (params->req_line_speed ==
+					   SPEED_2500) {
+					val = (1<<5);
+					/* Note that 2.5G works only
+					when used with 1G advertisment */
+				} else
+					val = (1<<5);
+			} else {
+
+				val = 0;
+				if (params->speed_cap_mask &
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+					val |= (1<<7);
+
+				/* Note that 2.5G works only when
+				used with 1G advertisment */
+				if (params->speed_cap_mask &
+					(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+					 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
+					val |= (1<<5);
+				DP(NETIF_MSG_LINK,
+					 "807x autoneg val = 0x%x\n", val);
+			}
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_ADV, val);
+			if (ext_phy_type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_8073_2_5G, &tmp1);
+
+				if (((params->speed_cap_mask &
+				      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
+				     (params->req_line_speed ==
+				      SPEED_AUTO_NEG)) ||
+				    (params->req_line_speed ==
+				     SPEED_2500)) {
+					u16 phy_ver;
+					/* Allow 2.5G for A1 and above */
+					bnx2x_cl45_read(bp, params->port,
+					 PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+					 ext_phy_addr,
+					 MDIO_PMA_DEVAD,
+					 MDIO_PMA_REG_8073_CHIP_REV, &phy_ver);
+					DP(NETIF_MSG_LINK, "Add 2.5G\n");
+					if (phy_ver > 0)
+						tmp1 |= 1;
+					else
+						tmp1 &= 0xfffe;
+				} else {
+					DP(NETIF_MSG_LINK, "Disable 2.5G\n");
+					tmp1 &= 0xfffe;
+				}
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_8073_2_5G, tmp1);
+			}
+
+			/* Add support for CL37 (passive mode) II */
+
+			bnx2x_cl45_read(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CL37_FC_LD,
+				       &tmp1);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CL37_FC_LD, (tmp1 |
+				       ((params->req_duplex == DUPLEX_FULL) ?
+				       0x20 : 0x40)));
+
+			/* Add support for CL37 (passive mode) III */
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CL37_AN, 0x1000);
+
+			if (ext_phy_type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+				/* The SNR will improve about 2db by changing
+				BW and FEE main tap. Rest commands are executed
+				after link is up*/
+				/*Change FFE main cursor to 5 in EDC register*/
+				if (bnx2x_8073_is_snr_needed(params))
+					bnx2x_cl45_write(bp, params->port,
+						    ext_phy_type,
+						    ext_phy_addr,
+						    MDIO_PMA_DEVAD,
+						    MDIO_PMA_REG_EDC_FFE_MAIN,
+						    0xFB0C);
+
+				/* Enable FEC (Forware Error Correction)
+				Request in the AN */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_ADV2, &tmp1);
+
+				tmp1 |= (1<<15);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_ADV2, tmp1);
+
+			}
+
+			bnx2x_ext_phy_set_pause(params, vars);
+
+			/* Restart autoneg */
+			msleep(500);
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CTRL, 0x1200);
+			DP(NETIF_MSG_LINK, "807x Autoneg Restart: "
+			   "Advertise 1G=%x, 10G=%x\n",
+			   ((val & (1<<5)) > 0),
+			   ((val & (1<<7)) > 0));
+			break;
+		}
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+		{
+			u16 tmp1;
+			u16 rx_alarm_ctrl_val;
+			u16 lasi_ctrl_val;
+
+			/* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
+
+			u16 mod_abs;
+			rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
+			lasi_ctrl_val = 0x0004;
+
+			DP(NETIF_MSG_LINK, "Initializing BCM8727\n");
+			/* enable LASI */
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_RX_ALARM_CTRL,
+				       rx_alarm_ctrl_val);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_LASI_CTRL,
+				       lasi_ctrl_val);
+
+			/* Initially configure  MOD_ABS to interrupt when
+			module is presence( bit 8) */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
+			/* Set EDC off by setting OPTXLOS signal input to low
+			(bit 9).
+			When the EDC is off it locks onto a reference clock and
+			avoids becoming 'lost'.*/
+			mod_abs &= ~((1<<8) | (1<<9));
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
+
+			/* Make MOD_ABS give interrupt on change */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+				      &val);
+			val |= (1<<12);
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+				       val);
+
+			/* Set 8727 GPIOs to input to allow reading from the
+			8727 GPIO0 status which reflect SFP+ module
+			over-current */
+
+			bnx2x_cl45_read(bp, params->port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+				       &val);
+			val &= 0xff8f; /* Reset bits 4-6 */
+			bnx2x_cl45_write(bp, params->port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_8727_PCS_OPT_CTRL,
+				       val);
+
+			bnx2x_8727_power_module(bp, params, ext_phy_addr, 1);
+			bnx2x_bcm8073_set_xaui_low_power_mode(params);
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_M8051_MSGOUT_REG,
+				      &tmp1);
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_RX_ALARM, &tmp1);
+
+			/* Set option 1G speed */
+			if (params->req_line_speed == SPEED_1000) {
+
+				DP(NETIF_MSG_LINK, "Setting 1G force\n");
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_CTRL, 0x40);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_10G_CTRL2, 0xD);
+				bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_10G_CTRL2, &tmp1);
+				DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
+
+			} else if ((params->req_line_speed ==
+				    SPEED_AUTO_NEG) &&
+				   ((params->speed_cap_mask &
+				     PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))) {
+
+				DP(NETIF_MSG_LINK, "Setting 1G clause37\n");
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_PMA_REG_8727_MISC_CTRL, 0);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CL37_AN, 0x1300);
+			} else {
+				/* Since the 8727 has only single reset pin,
+				need to set the 10G registers although it is
+				default */
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       MDIO_AN_REG_CTRL, 0x0020);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_AN_DEVAD,
+					       0x7, 0x0100);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_CTRL, 0x2040);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_10G_CTRL2, 0x0008);
+			}
+
+			/* Set 2-wire transfer rate of SFP+ module EEPROM
+			 * to 100Khz since some DACs(direct attached cables) do
+			 * not work at 400Khz.
+			 */
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR,
+				       0xa001);
+
+			/* Set TX PreEmphasis if needed */
+			if ((params->feature_config_flags &
+			     FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
+				DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
+					 "TX_CTRL2 0x%x\n",
+					 params->xgxs_config_tx[0],
+					 params->xgxs_config_tx[1]);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_8727_TX_CTRL1,
+					       params->xgxs_config_tx[0]);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_8727_TX_CTRL2,
+					       params->xgxs_config_tx[1]);
+			}
+
+			break;
+		}
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+		{
+			u16 fw_ver1, fw_ver2;
+			DP(NETIF_MSG_LINK,
+				"Setting the SFX7101 LASI indication\n");
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_LASI_CTRL, 0x1);
+			DP(NETIF_MSG_LINK,
+			  "Setting the SFX7101 LED to blink on traffic\n");
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_7107_LED_CNTL, (1<<3));
+
+			bnx2x_ext_phy_set_pause(params, vars);
+			/* Restart autoneg */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CTRL, &val);
+			val |= 0x200;
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CTRL, val);
+
+			/* Save spirom version */
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr, MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_7101_VER1, &fw_ver1);
+
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr, MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_7101_VER2, &fw_ver2);
+
+			bnx2x_save_spirom_version(params->bp, params->port,
+						params->shmem_base,
+						(u32)(fw_ver1<<16 | fw_ver2));
+			break;
+		}
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+			/* This phy uses the NIG latch mechanism since link
+				indication arrives through its LED4 and not via
+				its LASI signal, so we get steady signal
+				instead of clear on read */
+			bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
+				    1 << NIG_LATCH_BC_ENABLE_MI_INT);
+
+			bnx2x_cl45_write(bp, params->port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 0x0000);
+
+			bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr);
+			if (params->req_line_speed == SPEED_AUTO_NEG) {
+
+				u16 autoneg_val, an_1000_val, an_10_100_val;
+				/* set 1000 speed advertisement */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_8481_1000T_CTRL,
+					      &an_1000_val);
+
+				if (params->speed_cap_mask &
+				    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+					an_1000_val |= (1<<8);
+					if (params->req_duplex == DUPLEX_FULL)
+						an_1000_val |= (1<<9);
+					DP(NETIF_MSG_LINK, "Advertising 1G\n");
+				} else
+					an_1000_val &= ~((1<<8) | (1<<9));
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_8481_1000T_CTRL,
+					       an_1000_val);
+
+				/* set 100 speed advertisement */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_8481_LEGACY_AN_ADV,
+					      &an_10_100_val);
+
+				if (params->speed_cap_mask &
+				 (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
+				  PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) {
+					an_10_100_val |= (1<<7);
+					if (params->req_duplex == DUPLEX_FULL)
+						an_10_100_val |= (1<<8);
+					DP(NETIF_MSG_LINK,
+						"Advertising 100M\n");
+				} else
+					an_10_100_val &= ~((1<<7) | (1<<8));
+
+				/* set 10 speed advertisement */
+				if (params->speed_cap_mask &
+				  (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
+				   PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) {
+					an_10_100_val |= (1<<5);
+					if (params->req_duplex == DUPLEX_FULL)
+						an_10_100_val |= (1<<6);
+					DP(NETIF_MSG_LINK, "Advertising 10M\n");
+				     }
+				else
+					an_10_100_val &= ~((1<<5) | (1<<6));
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_8481_LEGACY_AN_ADV,
+					       an_10_100_val);
+
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+					      &autoneg_val);
+
+				/* Disable forced speed */
+				autoneg_val &= ~(1<<6|1<<13);
+
+				/* Enable autoneg and restart autoneg
+				for legacy speeds */
+				autoneg_val |= (1<<9|1<<12);
+
+				if (params->req_duplex == DUPLEX_FULL)
+					autoneg_val |= (1<<8);
+				else
+					autoneg_val &= ~(1<<8);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+					       autoneg_val);
+
+				if (params->speed_cap_mask &
+				    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+					DP(NETIF_MSG_LINK, "Advertising 10G\n");
+					/* Restart autoneg for 10G*/
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CTRL, 0x3200);
+				}
+			} else {
+				/* Force speed */
+				u16 autoneg_ctrl, pma_ctrl;
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+					      &autoneg_ctrl);
+
+				/* Disable autoneg */
+				autoneg_ctrl &= ~(1<<12);
+
+				/* Set 1000 force */
+				switch (params->req_line_speed) {
+				case SPEED_10000:
+					DP(NETIF_MSG_LINK,
+						"Unable to set 10G force !\n");
+					break;
+				case SPEED_1000:
+					bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_PMA_DEVAD,
+						      MDIO_PMA_REG_CTRL,
+						      &pma_ctrl);
+					autoneg_ctrl &= ~(1<<13);
+					autoneg_ctrl |= (1<<6);
+					pma_ctrl &= ~(1<<13);
+					pma_ctrl |= (1<<6);
+					DP(NETIF_MSG_LINK,
+						"Setting 1000M force\n");
+					bnx2x_cl45_write(bp, params->port,
+						       ext_phy_type,
+						       ext_phy_addr,
+						       MDIO_PMA_DEVAD,
+						       MDIO_PMA_REG_CTRL,
+						       pma_ctrl);
+					break;
+				case SPEED_100:
+					autoneg_ctrl |= (1<<13);
+					autoneg_ctrl &= ~(1<<6);
+					DP(NETIF_MSG_LINK,
+						"Setting 100M force\n");
+					break;
+				case SPEED_10:
+					autoneg_ctrl &= ~(1<<13);
+					autoneg_ctrl &= ~(1<<6);
+					DP(NETIF_MSG_LINK,
+						"Setting 10M force\n");
+					break;
+				}
+
+				/* Duplex mode */
+				if (params->req_duplex == DUPLEX_FULL) {
+					autoneg_ctrl |= (1<<8);
+					DP(NETIF_MSG_LINK,
+						"Setting full duplex\n");
+				} else
+					autoneg_ctrl &= ~(1<<8);
+
+				/* Update autoneg ctrl and pma ctrl */
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_8481_LEGACY_MII_CTRL,
+					       autoneg_ctrl);
+			}
+
+			/* Save spirom version */
+			bnx2x_save_8481_spirom_version(bp, params->port,
+						     ext_phy_addr,
+						     params->shmem_base);
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+			DP(NETIF_MSG_LINK,
+				 "XGXS PHY Failure detected 0x%x\n",
+				 params->ext_phy_config);
+			rc = -EINVAL;
+			break;
+		default:
+			DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+				  params->ext_phy_config);
+			rc = -EINVAL;
+			break;
+		}
+
+	} else { /* SerDes */
+
+		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
+			DP(NETIF_MSG_LINK, "SerDes Direct\n");
+			break;
+
+		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
+			DP(NETIF_MSG_LINK, "SerDes 5482\n");
+			break;
+
+		default:
+			DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
+			   params->ext_phy_config);
+			break;
+		}
+	}
+	return rc;
+}
+
+static void bnx2x_8727_handle_mod_abs(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 mod_abs, rx_alarm_status;
+	u8 ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+	u32 val = REG_RD(bp, params->shmem_base +
+			     offsetof(struct shmem_region, dev_info.
+				      port_feature_config[params->port].
+				      config));
+	bnx2x_cl45_read(bp, params->port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
+	if (mod_abs & (1<<8)) {
+
+		/* Module is absent */
+		DP(NETIF_MSG_LINK, "MOD_ABS indication "
+			    "show module is absent\n");
+
+		/* 1. Set mod_abs to detect next module
+		presence event
+		   2. Set EDC off by setting OPTXLOS signal input to low
+			(bit 9).
+			When the EDC is off it locks onto a reference clock and
+			avoids becoming 'lost'.*/
+		mod_abs &= ~((1<<8)|(1<<9));
+		bnx2x_cl45_write(bp, params->port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+			       ext_phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
+
+		/* Clear RX alarm since it stays up as long as
+		the mod_abs wasn't changed */
+		bnx2x_cl45_read(bp, params->port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+
+	} else {
+		/* Module is present */
+		DP(NETIF_MSG_LINK, "MOD_ABS indication "
+			    "show module is present\n");
+		/* First thing, disable transmitter,
+		and if the module is ok, the
+		module_detection will enable it*/
+
+		/* 1. Set mod_abs to detect next module
+		absent event ( bit 8)
+		   2. Restore the default polarity of the OPRXLOS signal and
+		this signal will then correctly indicate the presence or
+		absence of the Rx signal. (bit 9) */
+		mod_abs |= ((1<<8)|(1<<9));
+		bnx2x_cl45_write(bp, params->port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+		       ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
+
+		/* Clear RX alarm since it stays up as long as
+		the mod_abs wasn't changed. This is need to be done
+		before calling the module detection, otherwise it will clear
+		the link update alarm */
+		bnx2x_cl45_read(bp, params->port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+			      ext_phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+
+
+		if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+		    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+			bnx2x_sfp_set_transmitter(bp, params->port,
+					PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+					ext_phy_addr, 0);
+
+		if (bnx2x_wait_for_sfp_module_initialized(params)
+		    == 0)
+			bnx2x_sfp_module_detection(params);
+		else
+			DP(NETIF_MSG_LINK, "SFP+ module is not initialized\n");
+	}
+
+	DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n",
+		 rx_alarm_status);
+	/* No need to check link status in case of
+	module plugged in/out */
+}
+
+
+static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
+				 struct link_vars *vars,
+				 u8 is_mi_int)
+{
+	struct bnx2x *bp = params->bp;
+	u32 ext_phy_type;
+	u8 ext_phy_addr;
+	u16 val1 = 0, val2;
+	u16 rx_sd, pcs_status;
+	u8 ext_phy_link_up = 0;
+	u8 port = params->port;
+
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+		ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+		ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+			DP(NETIF_MSG_LINK, "XGXS Direct\n");
+			ext_phy_link_up = 1;
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+			DP(NETIF_MSG_LINK, "XGXS 8705\n");
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_WIS_DEVAD,
+				      MDIO_WIS_REG_LASI_STATUS, &val1);
+			DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_WIS_DEVAD,
+				      MDIO_WIS_REG_LASI_STATUS, &val1);
+			DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_RX_SD, &rx_sd);
+
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      1,
+				      0xc809, &val1);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      1,
+				      0xc809, &val1);
+
+			DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1);
+			ext_phy_link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) &&
+					   ((val1 & (1<<8)) == 0));
+			if (ext_phy_link_up)
+				vars->line_speed = SPEED_10000;
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+			DP(NETIF_MSG_LINK, "XGXS 8706/8726\n");
+			/* Clear RX Alarm*/
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM,
+				      &val2);
+			/* clear LASI indication*/
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS,
+				      &val1);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_STATUS,
+				      &val2);
+			DP(NETIF_MSG_LINK, "8706/8726 LASI status 0x%x-->"
+				     "0x%x\n", val1, val2);
+
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD,
+				      &rx_sd);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS,
+				      &pcs_status);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS,
+				      &val2);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS,
+				      &val2);
+
+			DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x"
+			   "  pcs_status 0x%x 1Gbps link_status 0x%x\n",
+			   rx_sd, pcs_status, val2);
+			/* link is up if both bit 0 of pmd_rx_sd and
+			 * bit 0 of pcs_status are set, or if the autoneg bit
+			   1 is set
+			 */
+			ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
+					   (val2 & (1<<1)));
+			if (ext_phy_link_up) {
+				if (ext_phy_type ==
+				     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) {
+					/* If transmitter is disabled,
+					ignore false link up indication */
+					bnx2x_cl45_read(bp, params->port,
+						   ext_phy_type,
+						   ext_phy_addr,
+						   MDIO_PMA_DEVAD,
+						   MDIO_PMA_REG_PHY_IDENTIFIER,
+						   &val1);
+					if (val1 & (1<<15)) {
+						DP(NETIF_MSG_LINK, "Tx is "
+							    "disabled\n");
+						ext_phy_link_up = 0;
+						break;
+					}
+				}
+				if (val2 & (1<<1))
+					vars->line_speed = SPEED_1000;
+				else
+					vars->line_speed = SPEED_10000;
+			}
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+		{
+			u16 link_status = 0;
+			u16 rx_alarm_status;
+			/* Check the LASI */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_RX_ALARM, &rx_alarm_status);
+
+			DP(NETIF_MSG_LINK, "8727 RX_ALARM_STATUS 0x%x\n",
+				 rx_alarm_status);
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_LASI_STATUS, &val1);
+
+			DP(NETIF_MSG_LINK,
+				 "8727 LASI status 0x%x\n",
+				 val1);
+
+			/* Clear MSG-OUT */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_M8051_MSGOUT_REG,
+				      &val1);
+
+			/*
+			 * If a module is present and there is need to check
+			 * for over current
+			 */
+			if (!(params->feature_config_flags &
+			      FEATURE_CONFIG_BCM8727_NOC) &&
+			    !(rx_alarm_status & (1<<5))) {
+				/* Check over-current using 8727 GPIO0 input*/
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_PMA_DEVAD,
+					      MDIO_PMA_REG_8727_GPIO_CTRL,
+					      &val1);
+
+				if ((val1 & (1<<8)) == 0) {
+					DP(NETIF_MSG_LINK, "8727 Power fault"
+						     " has been detected on "
+						     "port %d\n",
+						 params->port);
+					netdev_err(bp->dev, "Error:  Power fault on Port %d has been detected and the power to that SFP+ module has been removed to prevent failure of the card. Please remove the SFP+ module and restart the system to clear this error.\n",
+						   params->port);
+					/*
+					 * Disable all RX_ALARMs except for
+					 * mod_abs
+					 */
+					bnx2x_cl45_write(bp, params->port,
+						     ext_phy_type,
+						     ext_phy_addr,
+						     MDIO_PMA_DEVAD,
+						     MDIO_PMA_REG_RX_ALARM_CTRL,
+						     (1<<5));
+
+					bnx2x_cl45_read(bp, params->port,
+						    ext_phy_type,
+						    ext_phy_addr,
+						    MDIO_PMA_DEVAD,
+						    MDIO_PMA_REG_PHY_IDENTIFIER,
+						    &val1);
+					/* Wait for module_absent_event */
+					val1 |= (1<<8);
+					bnx2x_cl45_write(bp, params->port,
+						    ext_phy_type,
+						    ext_phy_addr,
+						    MDIO_PMA_DEVAD,
+						    MDIO_PMA_REG_PHY_IDENTIFIER,
+						    val1);
+					/* Clear RX alarm */
+					bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_PMA_DEVAD,
+						      MDIO_PMA_REG_RX_ALARM,
+						      &rx_alarm_status);
+					break;
+				}
+			} /* Over current check */
+
+			/* When module absent bit is set, check module */
+			if (rx_alarm_status & (1<<5)) {
+				bnx2x_8727_handle_mod_abs(params);
+				/* Enable all mod_abs and link detection bits */
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_RX_ALARM_CTRL,
+					       ((1<<5) | (1<<2)));
+			}
+
+			/* If transmitter is disabled,
+			ignore false link up indication */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_PHY_IDENTIFIER,
+				      &val1);
+			if (val1 & (1<<15)) {
+				DP(NETIF_MSG_LINK, "Tx is disabled\n");
+				ext_phy_link_up = 0;
+				break;
+			}
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+				      &link_status);
+
+			/* Bits 0..2 --> speed detected,
+			   bits 13..15--> link is down */
+			if ((link_status & (1<<2)) &&
+			    (!(link_status & (1<<15)))) {
+				ext_phy_link_up = 1;
+				vars->line_speed = SPEED_10000;
+			} else if ((link_status & (1<<0)) &&
+				   (!(link_status & (1<<13)))) {
+				ext_phy_link_up = 1;
+				vars->line_speed = SPEED_1000;
+				DP(NETIF_MSG_LINK,
+					 "port %x: External link"
+					 " up in 1G\n", params->port);
+			} else {
+				ext_phy_link_up = 0;
+				DP(NETIF_MSG_LINK,
+					 "port %x: External link"
+					 " is down\n", params->port);
+			}
+			break;
+		}
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+		{
+			u16 link_status = 0;
+			u16 an1000_status = 0;
+
+			if (ext_phy_type ==
+			     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
+				bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PCS_DEVAD,
+				      MDIO_PCS_REG_LASI_STATUS, &val1);
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PCS_DEVAD,
+				      MDIO_PCS_REG_LASI_STATUS, &val2);
+			DP(NETIF_MSG_LINK,
+				 "870x LASI status 0x%x->0x%x\n",
+				  val1, val2);
+			} else {
+				/* In 8073, port1 is directed through emac0 and
+				 * port0 is directed through emac1
+				 */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_PMA_DEVAD,
+					      MDIO_PMA_REG_LASI_STATUS, &val1);
+
+				DP(NETIF_MSG_LINK,
+					 "8703 LASI status 0x%x\n",
+					  val1);
+			}
+
+			/* clear the interrupt LASI status register */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PCS_DEVAD,
+				      MDIO_PCS_REG_STATUS, &val2);
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PCS_DEVAD,
+				      MDIO_PCS_REG_STATUS, &val1);
+			DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
+			   val2, val1);
+			/* Clear MSG-OUT */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_M8051_MSGOUT_REG,
+				      &val1);
+
+			/* Check the LASI */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_RX_ALARM, &val2);
+
+			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
+
+			/* Check the link status */
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PCS_DEVAD,
+				      MDIO_PCS_REG_STATUS, &val2);
+			DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
+
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_STATUS, &val2);
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_STATUS, &val1);
+			ext_phy_link_up = ((val1 & 4) == 4);
+			DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
+			if (ext_phy_type ==
+			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+
+				if (ext_phy_link_up &&
+				    ((params->req_line_speed !=
+					SPEED_10000))) {
+					if (bnx2x_bcm8073_xaui_wa(params)
+					     != 0) {
+						ext_phy_link_up = 0;
+						break;
+					}
+				}
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
+
+				/* Check the link status on 1.1.2 */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_PMA_DEVAD,
+					      MDIO_PMA_REG_STATUS, &val2);
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_PMA_DEVAD,
+					      MDIO_PMA_REG_STATUS, &val1);
+				DP(NETIF_MSG_LINK, "KR PMA status 0x%x->0x%x,"
+					     "an_link_status=0x%x\n",
+					  val2, val1, an1000_status);
+
+				ext_phy_link_up = (((val1 & 4) == 4) ||
+						(an1000_status & (1<<1)));
+				if (ext_phy_link_up &&
+				    bnx2x_8073_is_snr_needed(params)) {
+					/* The SNR will improve about 2dbby
+					changing the BW and FEE main tap.*/
+
+					/* The 1st write to change FFE main
+					tap is set before restart AN */
+					/* Change PLL Bandwidth in EDC
+					register */
+					bnx2x_cl45_write(bp, port, ext_phy_type,
+						    ext_phy_addr,
+						    MDIO_PMA_DEVAD,
+						    MDIO_PMA_REG_PLL_BANDWIDTH,
+						    0x26BC);
+
+					/* Change CDR Bandwidth in EDC
+					register */
+					bnx2x_cl45_write(bp, port, ext_phy_type,
+						    ext_phy_addr,
+						    MDIO_PMA_DEVAD,
+						    MDIO_PMA_REG_CDR_BANDWIDTH,
+						    0x0333);
+				}
+				bnx2x_cl45_read(bp, params->port,
+					   ext_phy_type,
+					   ext_phy_addr,
+					   MDIO_PMA_DEVAD,
+					   MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
+					   &link_status);
+
+				/* Bits 0..2 --> speed detected,
+				   bits 13..15--> link is down */
+				if ((link_status & (1<<2)) &&
+				    (!(link_status & (1<<15)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
+				} else if ((link_status & (1<<1)) &&
+					   (!(link_status & (1<<14)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_2500;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 2.5G\n", params->port);
+				} else if ((link_status & (1<<0)) &&
+					   (!(link_status & (1<<13)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else {
+					ext_phy_link_up = 0;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " is down\n", params->port);
+				}
+			} else {
+				/* See if 1G link is up for the 8072 */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_LINK_STATUS,
+					      &an1000_status);
+				if (an1000_status & (1<<1)) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else if (ext_phy_link_up) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
+				}
+			}
+
+
+			break;
+		}
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_LASI_STATUS, &val2);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_LASI_STATUS, &val1);
+			DP(NETIF_MSG_LINK,
+				 "10G-base-T LASI status 0x%x->0x%x\n",
+				  val2, val1);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_STATUS, &val2);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_STATUS, &val1);
+			DP(NETIF_MSG_LINK,
+				 "10G-base-T PMA status 0x%x->0x%x\n",
+				 val2, val1);
+			ext_phy_link_up = ((val1 & 4) == 4);
+			/* if link is up
+			 * print the AN outcome of the SFX7101 PHY
+			 */
+			if (ext_phy_link_up) {
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_MASTER_STATUS,
+					      &val2);
+				vars->line_speed = SPEED_10000;
+				DP(NETIF_MSG_LINK,
+					 "SFX7101 AN status 0x%x->Master=%x\n",
+					  val2,
+					 (val2 & (1<<14)));
+			}
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+			/* Check 10G-BaseT link status */
+			/* Check PMD signal ok */
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0xFFFA,
+						      &val1);
+			bnx2x_cl45_read(bp, params->port, ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      MDIO_PMA_REG_8481_PMD_SIGNAL,
+				      &val2);
+			DP(NETIF_MSG_LINK, "PMD_SIGNAL 1.a811 = 0x%x\n", val2);
+
+			/* Check link 10G */
+			if (val2 & (1<<11)) {
+				vars->line_speed = SPEED_10000;
+				ext_phy_link_up = 1;
+				bnx2x_8481_set_10G_led_mode(params,
+							  ext_phy_type,
+							  ext_phy_addr);
+			} else { /* Check Legacy speed link */
+				u16 legacy_status, legacy_speed;
+
+				/* Enable expansion register 0x42
+				(Operation mode status) */
+				bnx2x_cl45_write(bp, params->port,
+					 ext_phy_type,
+					 ext_phy_addr,
+					 MDIO_AN_DEVAD,
+					 MDIO_AN_REG_8481_EXPANSION_REG_ACCESS,
+					 0xf42);
+
+				/* Get legacy speed operation status */
+				bnx2x_cl45_read(bp, params->port,
+					  ext_phy_type,
+					  ext_phy_addr,
+					  MDIO_AN_DEVAD,
+					  MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
+					  &legacy_status);
+
+				DP(NETIF_MSG_LINK, "Legacy speed status"
+					     " = 0x%x\n", legacy_status);
+				ext_phy_link_up = ((legacy_status & (1<<11))
+						   == (1<<11));
+				if (ext_phy_link_up) {
+					legacy_speed = (legacy_status & (3<<9));
+					if (legacy_speed == (0<<9))
+						vars->line_speed = SPEED_10;
+					else if (legacy_speed == (1<<9))
+						vars->line_speed =
+							SPEED_100;
+					else if (legacy_speed == (2<<9))
+						vars->line_speed =
+							SPEED_1000;
+					else /* Should not happen */
+						vars->line_speed = 0;
+
+					if (legacy_status & (1<<8))
+						vars->duplex = DUPLEX_FULL;
+					else
+						vars->duplex = DUPLEX_HALF;
+
+					DP(NETIF_MSG_LINK, "Link is up "
+						     "in %dMbps, is_duplex_full"
+						     "= %d\n",
+						vars->line_speed,
+						(vars->duplex == DUPLEX_FULL));
+					bnx2x_8481_set_legacy_led_mode(params,
+								 ext_phy_type,
+								 ext_phy_addr);
+				}
+			}
+			break;
+		default:
+			DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+			   params->ext_phy_config);
+			ext_phy_link_up = 0;
+			break;
+		}
+		/* Set SGMII mode for external phy */
+		if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
+			if (vars->line_speed < SPEED_1000)
+				vars->phy_flags |= PHY_SGMII_FLAG;
+			else
+				vars->phy_flags &= ~PHY_SGMII_FLAG;
+		}
+
+	} else { /* SerDes */
+		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
+			DP(NETIF_MSG_LINK, "SerDes Direct\n");
+			ext_phy_link_up = 1;
+			break;
+
+		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
+			DP(NETIF_MSG_LINK, "SerDes 5482\n");
+			ext_phy_link_up = 1;
+			break;
+
+		default:
+			DP(NETIF_MSG_LINK,
+				 "BAD SerDes ext_phy_config 0x%x\n",
+				 params->ext_phy_config);
+			ext_phy_link_up = 0;
+			break;
+		}
+	}
+
+	return ext_phy_link_up;
+}
+
+static void bnx2x_link_int_enable(struct link_params *params)
+{
+	u8 port = params->port;
+	u32 ext_phy_type;
+	u32 mask;
+	struct bnx2x *bp = params->bp;
+
+	/* setting the status to report on link up
+	   for either XGXS or SerDes */
+
+	if (params->switch_cfg == SWITCH_CFG_10G) {
+		mask = (NIG_MASK_XGXS0_LINK10G |
+			NIG_MASK_XGXS0_LINK_STATUS);
+		DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
+		ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+		if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+		    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+		    (ext_phy_type !=
+				PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
+			mask |= NIG_MASK_MI_INT;
+			DP(NETIF_MSG_LINK, "enabled external phy int\n");
+		}
+
+	} else { /* SerDes */
+		mask = NIG_MASK_SERDES0_LINK_STATUS;
+		DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
+		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
+		if ((ext_phy_type !=
+				PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+		    (ext_phy_type !=
+				PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
+			mask |= NIG_MASK_MI_INT;
+			DP(NETIF_MSG_LINK, "enabled external phy int\n");
+		}
+	}
+	bnx2x_bits_en(bp,
+		      NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+		      mask);
+
+	DP(NETIF_MSG_LINK, "port %x, is_xgxs %x, int_status 0x%x\n", port,
+		 (params->switch_cfg == SWITCH_CFG_10G),
+		 REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
+	DP(NETIF_MSG_LINK, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x\n",
+		 REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+		 REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
+		 REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS+port*0x3c));
+	DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
+	   REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+	   REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
+}
+
+static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port,
+					u8 is_mi_int)
+{
+	u32 latch_status = 0, is_mi_int_status;
+	/* Disable the MI INT ( external phy int )
+	 * by writing 1 to the status register. Link down indication
+	 * is high-active-signal, so in this case we need to write the
+	 * status to clear the XOR
+	 */
+	/* Read Latched signals */
+	latch_status = REG_RD(bp,
+				  NIG_REG_LATCH_STATUS_0 + port*8);
+	is_mi_int_status = REG_RD(bp,
+				  NIG_REG_STATUS_INTERRUPT_PORT0 + port*4);
+	DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x,"
+		     "latch_status = 0x%x\n",
+		 is_mi_int, is_mi_int_status, latch_status);
+	/* Handle only those with latched-signal=up.*/
+	if (latch_status & 1) {
+		/* For all latched-signal=up,Write original_signal to status */
+		if (is_mi_int)
+			bnx2x_bits_en(bp,
+				    NIG_REG_STATUS_INTERRUPT_PORT0
+				    + port*4,
+				    NIG_STATUS_EMAC0_MI_INT);
+		else
+			bnx2x_bits_dis(bp,
+				     NIG_REG_STATUS_INTERRUPT_PORT0
+				     + port*4,
+				     NIG_STATUS_EMAC0_MI_INT);
+		/* For all latched-signal=up : Re-Arm Latch signals */
+		REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8,
+			   (latch_status & 0xfffe) | (latch_status & 1));
+	}
+}
+/*
+ * link management
+ */
+static void bnx2x_link_int_ack(struct link_params *params,
+			     struct link_vars *vars, u8 is_10g,
+			     u8 is_mi_int)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+
+	/* first reset all status
+	 * we assume only one line will be change at a time */
+	bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
+		     (NIG_STATUS_XGXS0_LINK10G |
+		      NIG_STATUS_XGXS0_LINK_STATUS |
+		      NIG_STATUS_SERDES0_LINK_STATUS));
+	if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+		== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) ||
+	(XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+		== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) {
+		bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int);
+	}
+	if (vars->phy_link_up) {
+		if (is_10g) {
+			/* Disable the 10G link interrupt
+			 * by writing 1 to the status register
+			 */
+			DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
+			bnx2x_bits_en(bp,
+				      NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
+				      NIG_STATUS_XGXS0_LINK10G);
+
+		} else if (params->switch_cfg == SWITCH_CFG_10G) {
+			/* Disable the link interrupt
+			 * by writing 1 to the relevant lane
+			 * in the status register
+			 */
+			u32 ser_lane = ((params->lane_config &
+				    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
+				    PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
+
+			DP(NETIF_MSG_LINK, "%d speed XGXS phy link up\n",
+				 vars->line_speed);
+			bnx2x_bits_en(bp,
+				      NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
+				      ((1 << ser_lane) <<
+				       NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
+
+		} else { /* SerDes */
+			DP(NETIF_MSG_LINK, "SerDes phy link up\n");
+			/* Disable the link interrupt
+			 * by writing 1 to the status register
+			 */
+			bnx2x_bits_en(bp,
+				      NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
+				      NIG_STATUS_SERDES0_LINK_STATUS);
+		}
+
+	} else { /* link_down */
+	}
+}
+
+static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
+{
+	u8 *str_ptr = str;
+	u32 mask = 0xf0000000;
+	u8 shift = 8*4;
+	u8 digit;
+	if (len < 10) {
+		/* Need more than 10chars for this format */
+		*str_ptr = '\0';
+		return -EINVAL;
+	}
+	while (shift > 0) {
+
+		shift -= 4;
+		digit = ((num & mask) >> shift);
+		if (digit < 0xa)
+			*str_ptr = digit + '0';
+		else
+			*str_ptr = digit - 0xa + 'a';
+		str_ptr++;
+		mask = mask >> 4;
+		if (shift == 4*4) {
+			*str_ptr = ':';
+			str_ptr++;
+		}
+	}
+	*str_ptr = '\0';
+	return 0;
+}
+
+u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
+			      u8 *version, u16 len)
+{
+	struct bnx2x *bp;
+	u32 ext_phy_type = 0;
+	u32 spirom_ver = 0;
+	u8 status;
+
+	if (version == NULL || params == NULL)
+		return -EINVAL;
+	bp = params->bp;
+
+	spirom_ver = REG_RD(bp, params->shmem_base +
+		   offsetof(struct shmem_region,
+			    port_mb[params->port].ext_phy_fw_version));
+
+	status = 0;
+	/* reset the returned value to zero */
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+
+		if (len < 5)
+			return -EINVAL;
+
+		version[0] = (spirom_ver & 0xFF);
+		version[1] = (spirom_ver & 0xFF00) >> 8;
+		version[2] = (spirom_ver & 0xFF0000) >> 16;
+		version[3] = (spirom_ver & 0xFF000000) >> 24;
+		version[4] = '\0';
+
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+		status = bnx2x_format_ver(spirom_ver, version, len);
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		spirom_ver = ((spirom_ver & 0xF80) >> 7) << 16 |
+			(spirom_ver & 0x7F);
+		status = bnx2x_format_ver(spirom_ver, version, len);
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+		version[0] = '\0';
+		break;
+
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+		DP(NETIF_MSG_LINK, "bnx2x_get_ext_phy_fw_version:"
+				    " type is FAILURE!\n");
+		status = -EINVAL;
+		break;
+
+	default:
+		break;
+	}
+	return status;
+}
+
+static void bnx2x_set_xgxs_loopback(struct link_params *params,
+				  struct link_vars *vars,
+				  u8 is_10g)
+{
+	u8 port = params->port;
+	struct bnx2x *bp = params->bp;
+
+	if (is_10g) {
+		u32 md_devad;
+
+		DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
+
+		/* change the uni_phy_addr in the nig */
+		md_devad = REG_RD(bp, (NIG_REG_XGXS0_CTRL_MD_DEVAD +
+					  port*0x18));
+
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18, 0x5);
+
+		bnx2x_cl45_write(bp, port, 0,
+			       params->phy_addr,
+			       5,
+			       (MDIO_REG_BANK_AER_BLOCK +
+				(MDIO_AER_BLOCK_AER_REG & 0xf)),
+			       0x2800);
+
+		bnx2x_cl45_write(bp, port, 0,
+			       params->phy_addr,
+			       5,
+			       (MDIO_REG_BANK_CL73_IEEEB0 +
+				(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
+			       0x6041);
+		msleep(200);
+		/* set aer mmd back */
+		bnx2x_set_aer_mmd(params, vars);
+
+		/* and md_devad */
+		REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
+			    md_devad);
+
+	} else {
+		u16 mii_control;
+
+		DP(NETIF_MSG_LINK, "XGXS 1G loopback enable\n");
+
+		CL45_RD_OVER_CL22(bp, port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_COMBO_IEEE0,
+				      MDIO_COMBO_IEEE0_MII_CONTROL,
+				      &mii_control);
+
+		CL45_WR_OVER_CL22(bp, port,
+				      params->phy_addr,
+				      MDIO_REG_BANK_COMBO_IEEE0,
+				      MDIO_COMBO_IEEE0_MII_CONTROL,
+				      (mii_control |
+				       MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK));
+	}
+}
+
+
+static void bnx2x_ext_phy_loopback(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 ext_phy_addr;
+	u32 ext_phy_type;
+
+	if (params->switch_cfg == SWITCH_CFG_10G) {
+		ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+		ext_phy_addr = XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+		/* CL37 Autoneg Enabled */
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN:
+			DP(NETIF_MSG_LINK,
+				"ext_phy_loopback: We should not get here\n");
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+			DP(NETIF_MSG_LINK, "ext_phy_loopback: 8705\n");
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+			DP(NETIF_MSG_LINK, "ext_phy_loopback: 8706\n");
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+			DP(NETIF_MSG_LINK, "PMA/PMD ext_phy_loopback: 8726\n");
+			bnx2x_cl45_write(bp, params->port, ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL,
+				       0x0001);
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+			/* SFX7101_XGXS_TEST1 */
+			bnx2x_cl45_write(bp, params->port, ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_XS_DEVAD,
+				       MDIO_XS_SFX7101_XGXS_TEST1,
+				       0x100);
+			DP(NETIF_MSG_LINK,
+				"ext_phy_loopback: set ext phy loopback\n");
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+
+			break;
+		} /* switch external PHY type */
+	} else {
+		/* serdes */
+		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
+		ext_phy_addr = (params->ext_phy_config  &
+		PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK)
+		>> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT;
+	}
+}
+
+
+/*
+ *------------------------------------------------------------------------
+ * bnx2x_override_led_value -
+ *
+ * Override the led value of the requsted led
+ *
+ *------------------------------------------------------------------------
+ */
+u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port,
+			  u32 led_idx, u32 value)
+{
+	u32 reg_val;
+
+	/* If port 0 then use EMAC0, else use EMAC1*/
+	u32 emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+	DP(NETIF_MSG_LINK,
+		 "bnx2x_override_led_value() port %x led_idx %d value %d\n",
+		 port, led_idx, value);
+
+	switch (led_idx) {
+	case 0: /* 10MB led */
+		/* Read the current value of the LED register in
+		the EMAC block */
+		reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
+		/* Set the OVERRIDE bit to 1 */
+		reg_val |= EMAC_LED_OVERRIDE;
+		/* If value is 1, set the 10M_OVERRIDE bit,
+		otherwise reset it.*/
+		reg_val = (value == 1) ? (reg_val | EMAC_LED_10MB_OVERRIDE) :
+			(reg_val & ~EMAC_LED_10MB_OVERRIDE);
+		REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
+		break;
+	case 1: /*100MB led    */
+		/*Read the current value of the LED register in
+		the EMAC block */
+		reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
+		/*  Set the OVERRIDE bit to 1 */
+		reg_val |= EMAC_LED_OVERRIDE;
+		/*  If value is 1, set the 100M_OVERRIDE bit,
+		otherwise reset it.*/
+		reg_val = (value == 1) ? (reg_val | EMAC_LED_100MB_OVERRIDE) :
+			(reg_val & ~EMAC_LED_100MB_OVERRIDE);
+		REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
+		break;
+	case 2: /* 1000MB led */
+		/* Read the current value of the LED register in the
+		EMAC block */
+		reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
+		/* Set the OVERRIDE bit to 1 */
+		reg_val |= EMAC_LED_OVERRIDE;
+		/* If value is 1, set the 1000M_OVERRIDE bit, otherwise
+		reset it. */
+		reg_val = (value == 1) ? (reg_val | EMAC_LED_1000MB_OVERRIDE) :
+			(reg_val & ~EMAC_LED_1000MB_OVERRIDE);
+		REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
+		break;
+	case 3: /* 2500MB led */
+		/*  Read the current value of the LED register in the
+		EMAC block*/
+		reg_val = REG_RD(bp, emac_base + EMAC_REG_EMAC_LED);
+		/* Set the OVERRIDE bit to 1 */
+		reg_val |= EMAC_LED_OVERRIDE;
+		/*  If value is 1, set the 2500M_OVERRIDE bit, otherwise
+		reset it.*/
+		reg_val = (value == 1) ? (reg_val | EMAC_LED_2500MB_OVERRIDE) :
+			(reg_val & ~EMAC_LED_2500MB_OVERRIDE);
+		REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
+		break;
+	case 4: /*10G led */
+		if (port == 0) {
+			REG_WR(bp, NIG_REG_LED_10G_P0,
+				    value);
+		} else {
+			REG_WR(bp, NIG_REG_LED_10G_P1,
+				    value);
+		}
+		break;
+	case 5: /* TRAFFIC led */
+		/* Find if the traffic control is via BMAC or EMAC */
+		if (port == 0)
+			reg_val = REG_RD(bp, NIG_REG_NIG_EMAC0_EN);
+		else
+			reg_val = REG_RD(bp, NIG_REG_NIG_EMAC1_EN);
+
+		/*  Override the traffic led in the EMAC:*/
+		if (reg_val == 1) {
+			/* Read the current value of the LED register in
+			the EMAC block */
+			reg_val = REG_RD(bp, emac_base +
+					     EMAC_REG_EMAC_LED);
+			/* Set the TRAFFIC_OVERRIDE bit to 1 */
+			reg_val |= EMAC_LED_OVERRIDE;
+			/* If value is 1, set the TRAFFIC bit, otherwise
+			reset it.*/
+			reg_val = (value == 1) ? (reg_val | EMAC_LED_TRAFFIC) :
+				(reg_val & ~EMAC_LED_TRAFFIC);
+			REG_WR(bp, emac_base + EMAC_REG_EMAC_LED, reg_val);
+		} else { /* Override the traffic led in the BMAC: */
+			REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
+				   + port*4, 1);
+			REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 + port*4,
+				    value);
+		}
+		break;
+	default:
+		DP(NETIF_MSG_LINK,
+			 "bnx2x_override_led_value() unknown led index %d "
+			 "(should be 0-5)\n", led_idx);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed)
+{
+	u8 port = params->port;
+	u16 hw_led_mode = params->hw_led_mode;
+	u8 rc = 0;
+	u32 tmp;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	struct bnx2x *bp = params->bp;
+	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
+	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
+		 speed, hw_led_mode);
+	switch (mode) {
+	case LED_MODE_OFF:
+		REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
+		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+			   SHARED_HW_CFG_LED_MAC1);
+
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
+		break;
+
+	case LED_MODE_OPER:
+		if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
+			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+			REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+		} else {
+			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+				   hw_led_mode);
+		}
+
+		REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 +
+			   port*4, 0);
+		/* Set blinking rate to ~15.9Hz */
+		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port*4,
+			   LED_BLINK_RATE_VAL);
+		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
+			   port*4, 1);
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED,
+			    (tmp & (~EMAC_LED_OVERRIDE)));
+
+		if (CHIP_IS_E1(bp) &&
+		    ((speed == SPEED_2500) ||
+		     (speed == SPEED_1000) ||
+		     (speed == SPEED_100) ||
+		     (speed == SPEED_10))) {
+			/* On Everest 1 Ax chip versions for speeds less than
+			10G LED scheme is different */
+			REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
+				   + port*4, 1);
+			REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 +
+				   port*4, 0);
+			REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 +
+				   port*4, 1);
+		}
+		break;
+
+	default:
+		rc = -EINVAL;
+		DP(NETIF_MSG_LINK, "bnx2x_set_led: Invalid led mode %d\n",
+			 mode);
+		break;
+	}
+	return rc;
+
+}
+
+u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u16 gp_status = 0;
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_GP_STATUS,
+			      MDIO_GP_STATUS_TOP_AN_STATUS1,
+			      &gp_status);
+	/* link is up only if both local phy and external phy are up */
+	if ((gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) &&
+	    bnx2x_ext_phy_is_link_up(params, vars, 1))
+		return 0;
+
+	return -ESRCH;
+}
+
+static u8 bnx2x_link_initialize(struct link_params *params,
+			      struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 rc = 0;
+	u8 non_ext_phy;
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Activate the external PHY */
+	bnx2x_ext_phy_reset(params, vars);
+
+	bnx2x_set_aer_mmd(params, vars);
+
+	if (vars->phy_flags & PHY_XGXS_FLAG)
+		bnx2x_set_master_ln(params);
+
+	rc = bnx2x_reset_unicore(params);
+	/* reset the SerDes and wait for reset bit return low */
+	if (rc != 0)
+		return rc;
+
+	bnx2x_set_aer_mmd(params, vars);
+
+	/* setting the masterLn_def again after the reset */
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+		bnx2x_set_master_ln(params);
+		bnx2x_set_swap_lanes(params);
+	}
+
+	if (vars->phy_flags & PHY_XGXS_FLAG) {
+		if ((params->req_line_speed &&
+		    ((params->req_line_speed == SPEED_100) ||
+		     (params->req_line_speed == SPEED_10))) ||
+		    (!params->req_line_speed &&
+		     (params->speed_cap_mask >=
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
+		     (params->speed_cap_mask <
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		     ))  {
+			vars->phy_flags |= PHY_SGMII_FLAG;
+		} else {
+			vars->phy_flags &= ~PHY_SGMII_FLAG;
+		}
+	}
+	/* In case of external phy existance, the line speed would be the
+	 line speed linked up by the external phy. In case it is direct only,
+	  then the line_speed during initialization will be equal to the
+	   req_line_speed*/
+	vars->line_speed = params->req_line_speed;
+
+	bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
+
+	/* init ext phy and enable link state int */
+	non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		       (params->loopback_mode == LOOPBACK_XGXS_10));
+
+	if (non_ext_phy ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
+	    (params->loopback_mode == LOOPBACK_EXT_PHY)) {
+		if (params->req_line_speed == SPEED_AUTO_NEG)
+			bnx2x_set_parallel_detection(params, vars->phy_flags);
+		bnx2x_init_internal_phy(params, vars, non_ext_phy);
+	}
+
+	if (!non_ext_phy)
+		rc |= bnx2x_ext_phy_init(params, vars);
+
+	bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
+		     (NIG_STATUS_XGXS0_LINK10G |
+		      NIG_STATUS_XGXS0_LINK_STATUS |
+		      NIG_STATUS_SERDES0_LINK_STATUS));
+
+	return rc;
+
+}
+
+
+u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u32 val;
+
+	DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+	DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n",
+		 params->req_line_speed, params->req_flow_ctrl);
+	vars->link_status = 0;
+	vars->phy_link_up = 0;
+	vars->link_up = 0;
+	vars->line_speed = 0;
+	vars->duplex = DUPLEX_FULL;
+	vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+	vars->mac_type = MAC_TYPE_NONE;
+
+	if (params->switch_cfg ==  SWITCH_CFG_1G)
+		vars->phy_flags = PHY_SERDES_FLAG;
+	else
+		vars->phy_flags = PHY_XGXS_FLAG;
+
+	/* disable attentions */
+	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
+		       (NIG_MASK_XGXS0_LINK_STATUS |
+			NIG_MASK_XGXS0_LINK10G |
+			NIG_MASK_SERDES0_LINK_STATUS |
+			NIG_MASK_MI_INT));
+
+	bnx2x_emac_init(params, vars);
+
+	if (CHIP_REV_IS_FPGA(bp)) {
+
+		vars->link_up = 1;
+		vars->line_speed = SPEED_10000;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+		vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
+		/* enable on E1.5 FPGA */
+		if (CHIP_IS_E1H(bp)) {
+			vars->flow_ctrl |=
+					(BNX2X_FLOW_CTRL_TX |
+					 BNX2X_FLOW_CTRL_RX);
+			vars->link_status |=
+					(LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
+					 LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
+		}
+
+		bnx2x_emac_enable(params, vars, 0);
+		bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
+		/* disable drain */
+		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+
+		/* update shared memory */
+		bnx2x_update_mng(params, vars->link_status);
+
+		return 0;
+
+	} else
+	if (CHIP_REV_IS_EMUL(bp)) {
+
+		vars->link_up = 1;
+		vars->line_speed = SPEED_10000;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+		vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
+
+		bnx2x_bmac_enable(params, vars, 0);
+
+		bnx2x_pbf_update(params, vars->flow_ctrl, vars->line_speed);
+		/* Disable drain */
+		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+				    + params->port*4, 0);
+
+		/* update shared memory */
+		bnx2x_update_mng(params, vars->link_status);
+
+		return 0;
+
+	} else
+	if (params->loopback_mode == LOOPBACK_BMAC) {
+
+		vars->link_up = 1;
+		vars->line_speed = SPEED_10000;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+		vars->mac_type = MAC_TYPE_BMAC;
+
+		vars->phy_flags = PHY_XGXS_FLAG;
+
+		bnx2x_phy_deassert(params, vars->phy_flags);
+		/* set bmac loopback */
+		bnx2x_bmac_enable(params, vars, 1);
+
+		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
+		    params->port*4, 0);
+
+	} else if (params->loopback_mode == LOOPBACK_EMAC) {
+
+		vars->link_up = 1;
+		vars->line_speed = SPEED_1000;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+		vars->mac_type = MAC_TYPE_EMAC;
+
+		vars->phy_flags = PHY_XGXS_FLAG;
+
+		bnx2x_phy_deassert(params, vars->phy_flags);
+		/* set bmac loopback */
+		bnx2x_emac_enable(params, vars, 1);
+		bnx2x_emac_program(params, vars->line_speed,
+					      vars->duplex);
+		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
+		    params->port*4, 0);
+
+	} else if ((params->loopback_mode == LOOPBACK_XGXS_10) ||
+		   (params->loopback_mode == LOOPBACK_EXT_PHY)) {
+
+		vars->link_up = 1;
+		vars->line_speed = SPEED_10000;
+		vars->duplex = DUPLEX_FULL;
+		vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+
+		vars->phy_flags = PHY_XGXS_FLAG;
+
+		val = REG_RD(bp,
+				 NIG_REG_XGXS0_CTRL_PHY_ADDR+
+				 params->port*0x18);
+		params->phy_addr = (u8)val;
+
+		bnx2x_phy_deassert(params, vars->phy_flags);
+		bnx2x_link_initialize(params, vars);
+
+		vars->mac_type = MAC_TYPE_BMAC;
+
+		bnx2x_bmac_enable(params, vars, 0);
+
+		if (params->loopback_mode == LOOPBACK_XGXS_10) {
+			/* set 10G XGXS loopback */
+			bnx2x_set_xgxs_loopback(params, vars, 1);
+		} else {
+			/* set external phy loopback */
+			bnx2x_ext_phy_loopback(params);
+		}
+		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
+			    params->port*4, 0);
+
+		bnx2x_set_led(params, LED_MODE_OPER, vars->line_speed);
+	} else
+	/* No loopback */
+	{
+		bnx2x_phy_deassert(params, vars->phy_flags);
+		switch (params->switch_cfg) {
+		case SWITCH_CFG_1G:
+			vars->phy_flags |= PHY_SERDES_FLAG;
+			if ((params->ext_phy_config &
+			     PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) ==
+			     PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482) {
+				vars->phy_flags |= PHY_SGMII_FLAG;
+			}
+
+			val = REG_RD(bp,
+					 NIG_REG_SERDES0_CTRL_PHY_ADDR+
+					 params->port*0x10);
+
+			params->phy_addr = (u8)val;
+
+			break;
+		case SWITCH_CFG_10G:
+			vars->phy_flags |= PHY_XGXS_FLAG;
+			val = REG_RD(bp,
+				 NIG_REG_XGXS0_CTRL_PHY_ADDR+
+				 params->port*0x18);
+			params->phy_addr = (u8)val;
+
+			break;
+		default:
+			DP(NETIF_MSG_LINK, "Invalid switch_cfg\n");
+			return -EINVAL;
+		}
+		DP(NETIF_MSG_LINK, "Phy address = 0x%x\n", params->phy_addr);
+
+		bnx2x_link_initialize(params, vars);
+		msleep(30);
+		bnx2x_link_int_enable(params);
+	}
+	return 0;
+}
+
+static void bnx2x_8726_reset_phy(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
+{
+	DP(NETIF_MSG_LINK, "bnx2x_8726_reset_phy port %d\n", port);
+
+	/* Set serial boot control for external load */
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_GEN_CTRL, 0x0001);
+}
+
+u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
+		  u8 reset_ext_phy)
+{
+	struct bnx2x *bp = params->bp;
+	u32 ext_phy_config = params->ext_phy_config;
+	u8 port = params->port;
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
+	u32 val = REG_RD(bp, params->shmem_base +
+			     offsetof(struct shmem_region, dev_info.
+				      port_feature_config[params->port].
+				      config));
+	DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);
+	/* disable attentions */
+	vars->link_status = 0;
+	bnx2x_update_mng(params, vars->link_status);
+	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+		     (NIG_MASK_XGXS0_LINK_STATUS |
+		      NIG_MASK_XGXS0_LINK10G |
+		      NIG_MASK_SERDES0_LINK_STATUS |
+		      NIG_MASK_MI_INT));
+
+	/* activate nig drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+	/* disable nig egress interface */
+	REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+
+	/* Stop BigMac rx */
+	bnx2x_bmac_rx_disable(bp, port);
+
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+	msleep(10);
+	/* The PHY reset is controled by GPIO 1
+	 * Hold it as vars low
+	 */
+	 /* clear link led */
+	bnx2x_set_led(params, LED_MODE_OFF, 0);
+	if (reset_ext_phy) {
+		switch (ext_phy_type) {
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+			break;
+
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+		{
+
+			/* Disable Transmitter */
+			u8 ext_phy_addr =
+				XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+			if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+			    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+				bnx2x_sfp_set_transmitter(bp, port,
+					PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+					ext_phy_addr, 0);
+			break;
+		}
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+			DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
+				 "low power mode\n",
+				 port);
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
+			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+		{
+			u8 ext_phy_addr =
+				XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+			/* Set soft reset */
+			bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr);
+			break;
+		}
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		{
+			u8 ext_phy_addr =
+				XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+			bnx2x_cl45_write(bp, port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CTRL, 0x0000);
+			bnx2x_cl45_write(bp, port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 1);
+			break;
+		}
+		default:
+			/* HW reset */
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
+			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
+			DP(NETIF_MSG_LINK, "reset external PHY\n");
+		}
+	}
+	/* reset the SerDes/XGXS */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
+	       (0x1ff << (port*16)));
+
+	/* reset BigMac */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+	       (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
+	/* disable nig ingress interface */
+	REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0);
+	REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0);
+	REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+	vars->link_up = 0;
+	return 0;
+}
+
+static u8 bnx2x_update_link_down(struct link_params *params,
+			       struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+
+	DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
+	bnx2x_set_led(params, LED_MODE_OFF, 0);
+
+	/* indicate no mac active */
+	vars->mac_type = MAC_TYPE_NONE;
+
+	/* update shared memory */
+	vars->link_status = 0;
+	vars->line_speed = 0;
+	bnx2x_update_mng(params, vars->link_status);
+
+	/* activate nig drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+	msleep(10);
+
+	/* reset BigMac */
+	bnx2x_bmac_rx_disable(bp, params->port);
+	REG_WR(bp, GRCBASE_MISC +
+		   MISC_REGISTERS_RESET_REG_2_CLEAR,
+		   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+	return 0;
+}
+
+static u8 bnx2x_update_link_up(struct link_params *params,
+			     struct link_vars *vars,
+			     u8 link_10g, u32 gp_status)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 rc = 0;
+
+	vars->link_status |= LINK_STATUS_LINK_UP;
+	if (link_10g) {
+		bnx2x_bmac_enable(params, vars, 0);
+		bnx2x_set_led(params, LED_MODE_OPER, SPEED_10000);
+	} else {
+		rc = bnx2x_emac_program(params, vars->line_speed,
+				      vars->duplex);
+
+		bnx2x_emac_enable(params, vars, 0);
+
+		/* AN complete? */
+		if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+			if (!(vars->phy_flags &
+			      PHY_SGMII_FLAG))
+				bnx2x_set_gmii_tx_driver(params);
+		}
+	}
+
+	/* PBF - link up */
+	rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
+			      vars->line_speed);
+
+	/* disable drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+
+	/* update shared memory */
+	bnx2x_update_mng(params, vars->link_status);
+	msleep(20);
+	return rc;
+}
+/* This function should called upon link interrupt */
+/* In case vars->link_up, driver needs to
+	1. Update the pbf
+	2. Disable drain
+	3. Update the shared memory
+	4. Indicate link up
+	5. Set LEDs
+   Otherwise,
+	1. Update shared memory
+	2. Reset BigMac
+	3. Report link down
+	4. Unset LEDs
+*/
+u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u16 gp_status;
+	u8 link_10g;
+	u8 ext_phy_link_up, rc = 0;
+	u32 ext_phy_type;
+	u8 is_mi_int = 0;
+
+	DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
+		 port, (vars->phy_flags & PHY_XGXS_FLAG),
+		 REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4));
+
+	is_mi_int = (u8)(REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT +
+				    port*0x18) > 0);
+	DP(NETIF_MSG_LINK, "int_mask 0x%x MI_INT %x, SERDES_LINK %x\n",
+		 REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+		 is_mi_int,
+		 REG_RD(bp,
+			    NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c));
+
+	DP(NETIF_MSG_LINK, " 10G %x, XGXS_LINK %x\n",
+	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
+
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Check external link change only for non-direct */
+	ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars, is_mi_int);
+
+	/* Read gp_status */
+	CL45_RD_OVER_CL22(bp, port, params->phy_addr,
+			      MDIO_REG_BANK_GP_STATUS,
+			      MDIO_GP_STATUS_TOP_AN_STATUS1,
+			      &gp_status);
+
+	rc = bnx2x_link_settings_status(params, vars, gp_status,
+				      ext_phy_link_up);
+	if (rc != 0)
+		return rc;
+
+	/* anything 10 and over uses the bmac */
+	link_10g = ((vars->line_speed == SPEED_10000) ||
+		    (vars->line_speed == SPEED_12000) ||
+		    (vars->line_speed == SPEED_12500) ||
+		    (vars->line_speed == SPEED_13000) ||
+		    (vars->line_speed == SPEED_15000) ||
+		    (vars->line_speed == SPEED_16000));
+
+	bnx2x_link_int_ack(params, vars, link_10g, is_mi_int);
+
+	/* In case external phy link is up, and internal link is down
+	( not initialized yet probably after link initialization, it needs
+	to be initialized.
+	Note that after link down-up as result of cable plug,
+	the xgxs link would probably become up again without the need to
+	initialize it*/
+
+	if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) &&
+	    (ext_phy_link_up && !vars->phy_link_up))
+		bnx2x_init_internal_phy(params, vars, 0);
+
+	/* link is up only if both local phy and external phy are up */
+	vars->link_up = (ext_phy_link_up && vars->phy_link_up);
+
+	if (vars->link_up)
+		rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
+	else
+		rc = bnx2x_update_link_down(params, vars);
+
+	return rc;
+}
+
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 ext_phy_addr[PORT_MAX];
+	u16 val;
+	s8 port;
+
+	/* PART1 - Reset both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Extract the ext phy address for the port */
+		u32 ext_phy_config = REG_RD(bp, shmem_base +
+					offsetof(struct shmem_region,
+		   dev_info.port_hw_config[port].external_phy_config));
+
+		/* disable attentions */
+		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+			     (NIG_MASK_XGXS0_LINK_STATUS |
+			      NIG_MASK_XGXS0_LINK10G |
+			      NIG_MASK_SERDES0_LINK_STATUS |
+			      NIG_MASK_MI_INT));
+
+		ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config);
+
+		/* Need to take the phy out of low power mode in order
+			to write to access its registers */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+
+		/* Reset the phy */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_CTRL,
+			       1<<15);
+	}
+
+	/* Add delay of 150ms after reset */
+	msleep(150);
+
+	/* PART2 - Download firmware to both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		u16 fw_ver1;
+
+		bnx2x_bcm8073_external_rom_boot(bp, port,
+					      ext_phy_addr[port], shmem_base);
+
+		bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+		if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
+			DP(NETIF_MSG_LINK,
+				 "bnx2x_8073_common_init_phy port %x:"
+				 "Download failed. fw version = 0x%x\n",
+				 port, fw_ver1);
+			return -EINVAL;
+		}
+
+		/* Only set bit 10 = 1 (Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
+
+		/* Phase1 of TX_POWER_DOWN reset */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN,
+			       (val | 1<<10));
+	}
+
+	/* Toggle Transmitter: Power down and then up with 600ms
+	   delay between */
+	msleep(600);
+
+	/* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Phase2 of POWER_DOWN_RESET */
+		/* Release bit 10 (Release Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
+
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
+		msleep(15);
+
+		/* Read modify write the SPI-ROM version select register */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, &val);
+		bnx2x_cl45_write(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
+
+		/* set GPIO2 back to LOW */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+	}
+	return 0;
+
+}
+
+static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 ext_phy_addr[PORT_MAX];
+	s8 port, first_port, i;
+	u32 swap_val, swap_override;
+	DP(NETIF_MSG_LINK, "Executing BCM8727 common init\n");
+	swap_val = REG_RD(bp,  NIG_REG_PORT_SWAP);
+	swap_override = REG_RD(bp,  NIG_REG_STRAP_OVERRIDE);
+
+	bnx2x_ext_phy_hw_reset(bp, 1 ^ (swap_val && swap_override));
+	msleep(5);
+
+	if (swap_val && swap_override)
+		first_port = PORT_0;
+	else
+		first_port = PORT_1;
+
+	/* PART1 - Reset both phys */
+	for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) {
+		/* Extract the ext phy address for the port */
+		u32 ext_phy_config = REG_RD(bp, shmem_base +
+					offsetof(struct shmem_region,
+		   dev_info.port_hw_config[port].external_phy_config));
+
+		/* disable attentions */
+		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+			     (NIG_MASK_XGXS0_LINK_STATUS |
+			      NIG_MASK_XGXS0_LINK10G |
+			      NIG_MASK_SERDES0_LINK_STATUS |
+			      NIG_MASK_MI_INT));
+
+		ext_phy_addr[port] = XGXS_EXT_PHY_ADDR(ext_phy_config);
+
+		/* Reset the phy */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_CTRL,
+			       1<<15);
+	}
+
+	/* Add delay of 150ms after reset */
+	msleep(150);
+
+	/* PART2 - Download firmware to both phys */
+	for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) {
+		u16 fw_ver1;
+
+		bnx2x_bcm8727_external_rom_boot(bp, port,
+					      ext_phy_addr[port], shmem_base);
+
+		bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+		if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
+			DP(NETIF_MSG_LINK,
+				 "bnx2x_8727_common_init_phy port %x:"
+				 "Download failed. fw version = 0x%x\n",
+				 port, fw_ver1);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+
+static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 ext_phy_addr;
+	u32 val;
+	s8 port;
+
+	/* Use port1 because of the static port-swap */
+	/* Enable the module detection interrupt */
+	val = REG_RD(bp, MISC_REG_GPIO_EVENT_EN);
+	val |= ((1<<MISC_REGISTERS_GPIO_3)|
+		(1<<(MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT)));
+	REG_WR(bp, MISC_REG_GPIO_EVENT_EN, val);
+
+	bnx2x_ext_phy_hw_reset(bp, 1);
+	msleep(5);
+	for (port = 0; port < PORT_MAX; port++) {
+		/* Extract the ext phy address for the port */
+		u32 ext_phy_config = REG_RD(bp, shmem_base +
+					offsetof(struct shmem_region,
+			dev_info.port_hw_config[port].external_phy_config));
+
+		ext_phy_addr = XGXS_EXT_PHY_ADDR(ext_phy_config);
+		DP(NETIF_MSG_LINK, "8726_common_init : ext_phy_addr = 0x%x\n",
+			 ext_phy_addr);
+
+		bnx2x_8726_reset_phy(bp, port, ext_phy_addr);
+
+		/* Set fault module detected LED on */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+				  MISC_REGISTERS_GPIO_HIGH,
+				  port);
+	}
+
+	return 0;
+}
+
+
+static u8 bnx2x_84823_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	/* HW reset */
+	bnx2x_ext_phy_hw_reset(bp, 1);
+	return 0;
+}
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 rc = 0;
+	u32 ext_phy_type;
+
+	DP(NETIF_MSG_LINK, "Begin common phy init\n");
+
+	/* Read the ext_phy_type for arbitrary port(0) */
+	ext_phy_type = XGXS_EXT_PHY_TYPE(
+			REG_RD(bp, shmem_base +
+			   offsetof(struct shmem_region,
+			     dev_info.port_hw_config[0].external_phy_config)));
+
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+	{
+		rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+		break;
+	}
+
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC:
+		rc = bnx2x_8727_common_init_phy(bp, shmem_base);
+		break;
+
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
+		/* GPIO1 affects both ports, so there's need to pull
+		it for single port alone */
+		rc = bnx2x_8726_common_init_phy(bp, shmem_base);
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		rc = bnx2x_84823_common_init_phy(bp, shmem_base);
+		break;
+	default:
+		DP(NETIF_MSG_LINK,
+			 "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
+			 ext_phy_type);
+		break;
+	}
+
+	return rc;
+}
+
+void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
+{
+	u16 val, cnt;
+
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+		      phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_7101_RESET, &val);
+
+	for (cnt = 0; cnt < 10; cnt++) {
+		msleep(50);
+		/* Writes a self-clearing reset */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+			       phy_addr,
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_7101_RESET,
+			       (val | (1<<15)));
+		/* Wait for clear */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+			      phy_addr,
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_7101_RESET, &val);
+
+		if ((val & (1<<15)) == 0)
+			break;
+	}
+}
author	Dmitry Kravkov <dmitry@broadcom.com>	2010-07-27 12:31:10 +0000
committer	David S. Miller <davem@davemloft.net>	2010-07-27 20:35:39 -0700
commit	5d1e859c5b600c491336f023a2f2105c24597226 (patch)
tree	9391b004d9237f385c36297214a022cadcb8f84a /drivers/net/bnx2x/bnx2x_link.c
parent	2c6952dfdda2f266f2f501792b8d6413caf25f7a (diff)
download	blackbird-op-linux-5d1e859c5b600c491336f023a2f2105c24597226.tar.gz blackbird-op-linux-5d1e859c5b600c491336f023a2f2105c24597226.zip