atl1e: Atheros L1E Gigabit Ethernet driver

Full patch for the Atheros L1E Gigabit Ethernet driver.
Supportring AR8121, AR8113 and AR8114

Signed-off-by: Jie Yang <jie.yang @atheros.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 664 insertions, 0 deletions

diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
new file mode 100644
index 000000000000..949e75358bf0
--- /dev/null
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+
+#include "atl1e.h"
+
+/*
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ */
+int atl1e_check_eeprom_exist(struct atl1e_hw *hw)
+{
+	u32 value;
+
+	value = AT_READ_REG(hw, REG_SPI_FLASH_CTRL);
+	if (value & SPI_FLASH_CTRL_EN_VPD) {
+		value &= ~SPI_FLASH_CTRL_EN_VPD;
+		AT_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
+	}
+	value = AT_READ_REGW(hw, REG_PCIE_CAP_LIST);
+	return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+void atl1e_hw_set_mac_addr(struct atl1e_hw *hw)
+{
+	u32 value;
+	/*
+	 * 00-0B-6A-F6-00-DC
+	 * 0:  6AF600DC 1: 000B
+	 * low dword
+	 */
+	value = (((u32)hw->mac_addr[2]) << 24) |
+		(((u32)hw->mac_addr[3]) << 16) |
+		(((u32)hw->mac_addr[4]) << 8)  |
+		(((u32)hw->mac_addr[5])) ;
+	AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
+	/* hight dword */
+	value = (((u32)hw->mac_addr[0]) << 8) |
+		(((u32)hw->mac_addr[1])) ;
+	AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
+}
+
+/*
+ * atl1e_get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int atl1e_get_permanent_address(struct atl1e_hw *hw)
+{
+	u32 addr[2];
+	u32 i;
+	u32 twsi_ctrl_data;
+	u8  eth_addr[ETH_ALEN];
+
+	if (is_valid_ether_addr(hw->perm_mac_addr))
+		return 0;
+
+	/* init */
+	addr[0] = addr[1] = 0;
+
+	if (!atl1e_check_eeprom_exist(hw)) {
+		/* eeprom exist */
+		twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL);
+		twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
+		AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data);
+		for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) {
+			msleep(10);
+			twsi_ctrl_data = AT_READ_REG(hw, REG_TWSI_CTRL);
+			if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0)
+				break;
+		}
+		if (i >= AT_TWSI_EEPROM_TIMEOUT)
+			return AT_ERR_TIMEOUT;
+	}
+
+	/* maybe MAC-address is from BIOS */
+	addr[0] = AT_READ_REG(hw, REG_MAC_STA_ADDR);
+	addr[1] = AT_READ_REG(hw, REG_MAC_STA_ADDR + 4);
+	*(u32 *) &eth_addr[2] = swab32(addr[0]);
+	*(u16 *) &eth_addr[0] = swab16(*(u16 *)&addr[1]);
+
+	if (is_valid_ether_addr(eth_addr)) {
+		memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+		return 0;
+	}
+
+	return AT_ERR_EEPROM;
+}
+
+bool atl1e_write_eeprom(struct atl1e_hw *hw, u32 offset, u32 value)
+{
+	return true;
+}
+
+bool atl1e_read_eeprom(struct atl1e_hw *hw, u32 offset, u32 *p_value)
+{
+	int i;
+	u32 control;
+
+	if (offset & 3)
+		return false; /* address do not align */
+
+	AT_WRITE_REG(hw, REG_VPD_DATA, 0);
+	control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+	AT_WRITE_REG(hw, REG_VPD_CAP, control);
+
+	for (i = 0; i < 10; i++) {
+		msleep(2);
+		control = AT_READ_REG(hw, REG_VPD_CAP);
+		if (control & VPD_CAP_VPD_FLAG)
+			break;
+	}
+	if (control & VPD_CAP_VPD_FLAG) {
+		*p_value = AT_READ_REG(hw, REG_VPD_DATA);
+		return true;
+	}
+	return false; /* timeout */
+}
+
+void atl1e_force_ps(struct atl1e_hw *hw)
+{
+	AT_WRITE_REGW(hw, REG_GPHY_CTRL,
+			GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
+}
+
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+int atl1e_read_mac_addr(struct atl1e_hw *hw)
+{
+	int err = 0;
+
+	err = atl1e_get_permanent_address(hw);
+	if (err)
+		return AT_ERR_EEPROM;
+	memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
+	return 0;
+}
+
+/*
+ * atl1e_hash_mc_addr
+ *  purpose
+ *      set hash value for a multicast address
+ *      hash calcu processing :
+ *          1. calcu 32bit CRC for multicast address
+ *          2. reverse crc with MSB to LSB
+ */
+u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
+{
+	u32 crc32;
+	u32 value = 0;
+	int i;
+
+	crc32 = ether_crc_le(6, mc_addr);
+	crc32 = ~crc32;
+	for (i = 0; i < 32; i++)
+		value |= (((crc32 >> i) & 1) << (31 - i));
+
+	return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+void atl1e_hash_set(struct atl1e_hw *hw, u32 hash_value)
+{
+	u32 hash_bit, hash_reg;
+	u32 mta;
+
+	/*
+	 * The HASH Table  is a register array of 2 32-bit registers.
+	 * It is treated like an array of 64 bits.  We want to set
+	 * bit BitArray[hash_value]. So we figure out what register
+	 * the bit is in, read it, OR in the new bit, then write
+	 * back the new value.  The register is determined by the
+	 * upper 7 bits of the hash value and the bit within that
+	 * register are determined by the lower 5 bits of the value.
+	 */
+	hash_reg = (hash_value >> 31) & 0x1;
+	hash_bit = (hash_value >> 26) & 0x1F;
+
+	mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
+
+	mta |= (1 << hash_bit);
+
+	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+}
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+int atl1e_read_phy_reg(struct atl1e_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+	u32 val;
+	int i;
+
+	val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+		MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
+		MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+	AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+	wmb();
+
+	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+		udelay(2);
+		val = AT_READ_REG(hw, REG_MDIO_CTRL);
+		if (!(val & (MDIO_START | MDIO_BUSY)))
+			break;
+		wmb();
+	}
+	if (!(val & (MDIO_START | MDIO_BUSY))) {
+		*phy_data = (u16)val;
+		return 0;
+	}
+
+	return AT_ERR_PHY;
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+int atl1e_write_phy_reg(struct atl1e_hw *hw, u32 reg_addr, u16 phy_data)
+{
+	int i;
+	u32 val;
+
+	val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+	       (reg_addr&MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+	       MDIO_SUP_PREAMBLE |
+	       MDIO_START |
+	       MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+	AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+	wmb();
+
+	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+		udelay(2);
+		val = AT_READ_REG(hw, REG_MDIO_CTRL);
+		if (!(val & (MDIO_START | MDIO_BUSY)))
+			break;
+		wmb();
+	}
+
+	if (!(val & (MDIO_START | MDIO_BUSY)))
+		return 0;
+
+	return AT_ERR_PHY;
+}
+
+/*
+ * atl1e_init_pcie - init PCIE module
+ */
+static void atl1e_init_pcie(struct atl1e_hw *hw)
+{
+	u32 value;
+	/* comment 2lines below to save more power when sususpend
+	   value = LTSSM_TEST_MODE_DEF;
+	   AT_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
+	 */
+
+	/* pcie flow control mode change */
+	value = AT_READ_REG(hw, 0x1008);
+	value |= 0x8000;
+	AT_WRITE_REG(hw, 0x1008, value);
+}
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+static int atl1e_phy_setup_autoneg_adv(struct atl1e_hw *hw)
+{
+	s32 ret_val;
+	u16 mii_autoneg_adv_reg;
+	u16 mii_1000t_ctrl_reg;
+
+	if (0 != hw->mii_autoneg_adv_reg)
+		return 0;
+	/* Read the MII Auto-Neg Advertisement Register (Address 4/9). */
+	mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+	mii_1000t_ctrl_reg  = MII_AT001_CR_1000T_DEFAULT_CAP_MASK;
+
+	/*
+	 * Need to parse autoneg_advertised  and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/*
+	 * First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T control Register (Address 9).
+	 */
+	mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
+	mii_1000t_ctrl_reg  &= ~MII_AT001_CR_1000T_SPEED_MASK;
+
+	/*
+	 * Need to parse MediaType and setup the
+	 * appropriate PHY registers.
+	 */
+	switch (hw->media_type) {
+	case MEDIA_TYPE_AUTO_SENSOR:
+		mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS   |
+					MII_AR_10T_FD_CAPS   |
+					MII_AR_100TX_HD_CAPS |
+					MII_AR_100TX_FD_CAPS);
+		hw->autoneg_advertised = ADVERTISE_10_HALF  |
+					 ADVERTISE_10_FULL  |
+					 ADVERTISE_100_HALF |
+					 ADVERTISE_100_FULL;
+		if (hw->nic_type == athr_l1e) {
+			mii_1000t_ctrl_reg |=
+				MII_AT001_CR_1000T_FD_CAPS;
+			hw->autoneg_advertised |= ADVERTISE_1000_FULL;
+		}
+		break;
+
+	case MEDIA_TYPE_100M_FULL:
+		mii_autoneg_adv_reg   |= MII_AR_100TX_FD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_100_FULL;
+		break;
+
+	case MEDIA_TYPE_100M_HALF:
+		mii_autoneg_adv_reg   |= MII_AR_100TX_HD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_100_HALF;
+		break;
+
+	case MEDIA_TYPE_10M_FULL:
+		mii_autoneg_adv_reg   |= MII_AR_10T_FD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_10_FULL;
+		break;
+
+	default:
+		mii_autoneg_adv_reg   |= MII_AR_10T_HD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_10_HALF;
+		break;
+	}
+
+	/* flow control fixed to enable all */
+	mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
+
+	hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+	hw->mii_1000t_ctrl_reg  = mii_1000t_ctrl_reg;
+
+	ret_val = atl1e_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+	if (ret_val)
+		return ret_val;
+
+	if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
+		ret_val = atl1e_write_phy_reg(hw, MII_AT001_CR,
+					   mii_1000t_ctrl_reg);
+		if (ret_val)
+			return ret_val;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Resets the PHY and make all config validate
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII control regiser (for F001 bug)
+ */
+int atl1e_phy_commit(struct atl1e_hw *hw)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	int ret_val;
+	u16 phy_data;
+
+	phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
+
+	ret_val = atl1e_write_phy_reg(hw, MII_BMCR, phy_data);
+	if (ret_val) {
+		u32 val;
+		int i;
+		/**************************************
+		 * pcie serdes link may be down !
+		 **************************************/
+		for (i = 0; i < 25; i++) {
+			msleep(1);
+			val = AT_READ_REG(hw, REG_MDIO_CTRL);
+			if (!(val & (MDIO_START | MDIO_BUSY)))
+				break;
+		}
+
+		if (0 != (val & (MDIO_START | MDIO_BUSY))) {
+			dev_err(&pdev->dev,
+				"pcie linkdown at least for 25ms\n");
+			return ret_val;
+		}
+
+		dev_err(&pdev->dev, "pcie linkup after %d ms\n", i);
+	}
+	return 0;
+}
+
+int atl1e_phy_init(struct atl1e_hw *hw)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+	s32 ret_val;
+	u16 phy_val;
+
+	if (hw->phy_configured) {
+		if (hw->re_autoneg) {
+			hw->re_autoneg = false;
+			return atl1e_restart_autoneg(hw);
+		}
+		return 0;
+	}
+
+	/* RESET GPHY Core */
+	AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
+	msleep(2);
+	AT_WRITE_REGW(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
+		      GPHY_CTRL_EXT_RESET);
+	msleep(2);
+
+	/* patches */
+	/* p1. eable hibernation mode */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0xB);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0xBC00);
+	if (ret_val)
+		return ret_val;
+	/* p2. set Class A/B for all modes */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0);
+	if (ret_val)
+		return ret_val;
+	phy_val = 0x02ef;
+	/* remove Class AB */
+	/* phy_val = hw->emi_ca ? 0x02ef : 0x02df; */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, phy_val);
+	if (ret_val)
+		return ret_val;
+	/* p3. 10B ??? */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x12);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x4C04);
+	if (ret_val)
+		return ret_val;
+	/* p4. 1000T power */
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x4);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x8BBB);
+	if (ret_val)
+		return ret_val;
+
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_ADDR, 0x5);
+	if (ret_val)
+		return ret_val;
+	ret_val = atl1e_write_phy_reg(hw, MII_DBG_DATA, 0x2C46);
+	if (ret_val)
+		return ret_val;
+
+	msleep(1);
+
+	/*Enable PHY LinkChange Interrupt */
+	ret_val = atl1e_write_phy_reg(hw, MII_INT_CTRL, 0xC00);
+	if (ret_val) {
+		dev_err(&pdev->dev, "Error enable PHY linkChange Interrupt\n");
+		return ret_val;
+	}
+	/* setup AutoNeg parameters */
+	ret_val = atl1e_phy_setup_autoneg_adv(hw);
+	if (ret_val) {
+		dev_err(&pdev->dev, "Error Setting up Auto-Negotiation\n");
+		return ret_val;
+	}
+	/* SW.Reset & En-Auto-Neg to restart Auto-Neg*/
+	dev_dbg(&pdev->dev, "Restarting Auto-Neg");
+	ret_val = atl1e_phy_commit(hw);
+	if (ret_val) {
+		dev_err(&pdev->dev, "Error Resetting the phy");
+		return ret_val;
+	}
+
+	hw->phy_configured = true;
+
+	return 0;
+}
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : 0  or  idle status (if error)
+ */
+int atl1e_reset_hw(struct atl1e_hw *hw)
+{
+	struct atl1e_adapter *adapter = (struct atl1e_adapter *)hw->adapter;
+	struct pci_dev *pdev = adapter->pdev;
+
+	u32 idle_status_data = 0;
+	u16 pci_cfg_cmd_word = 0;
+	int timeout = 0;
+
+	/* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
+	pci_read_config_word(pdev, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+	if ((pci_cfg_cmd_word & (CMD_IO_SPACE |
+				CMD_MEMORY_SPACE | CMD_BUS_MASTER))
+			!= (CMD_IO_SPACE | CMD_MEMORY_SPACE | CMD_BUS_MASTER)) {
+		pci_cfg_cmd_word |= (CMD_IO_SPACE |
+				     CMD_MEMORY_SPACE | CMD_BUS_MASTER);
+		pci_write_config_word(pdev, PCI_REG_COMMAND, pci_cfg_cmd_word);
+	}
+
+	/*
+	 * Issue Soft Reset to the MAC.  This will reset the chip's
+	 * transmit, receive, DMA.  It will not effect
+	 * the current PCI configuration.  The global reset bit is self-
+	 * clearing, and should clear within a microsecond.
+	 */
+	AT_WRITE_REG(hw, REG_MASTER_CTRL,
+			MASTER_CTRL_LED_MODE | MASTER_CTRL_SOFT_RST);
+	wmb();
+	msleep(1);
+
+	/* Wait at least 10ms for All module to be Idle */
+	for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+		idle_status_data = AT_READ_REG(hw, REG_IDLE_STATUS);
+		if (idle_status_data == 0)
+			break;
+		msleep(1);
+		cpu_relax();
+	}
+
+	if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+		dev_err(&pdev->dev,
+			"MAC state machine cann't be idle since"
+			" disabled for 10ms second\n");
+		return AT_ERR_TIMEOUT;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes multicast table,
+ * and  Calls routines to setup link
+ * Leaves the transmit and receive units disabled and uninitialized.
+ */
+int atl1e_init_hw(struct atl1e_hw *hw)
+{
+	s32 ret_val = 0;
+
+	atl1e_init_pcie(hw);
+
+	/* Zero out the Multicast HASH table */
+	/* clear the old settings from the multicast hash table */
+	AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+	AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+	ret_val = atl1e_phy_init(hw);
+
+	return ret_val;
+}
+
+/*
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ */
+int atl1e_get_speed_and_duplex(struct atl1e_hw *hw, u16 *speed, u16 *duplex)
+{
+	int err;
+	u16 phy_data;
+
+	/* Read   PHY Specific Status Register (17) */
+	err = atl1e_read_phy_reg(hw, MII_AT001_PSSR, &phy_data);
+	if (err)
+		return err;
+
+	if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED))
+		return AT_ERR_PHY_RES;
+
+	switch (phy_data & MII_AT001_PSSR_SPEED) {
+	case MII_AT001_PSSR_1000MBS:
+		*speed = SPEED_1000;
+		break;
+	case MII_AT001_PSSR_100MBS:
+		*speed = SPEED_100;
+		break;
+	case MII_AT001_PSSR_10MBS:
+		*speed = SPEED_10;
+		break;
+	default:
+		return AT_ERR_PHY_SPEED;
+		break;
+	}
+
+	if (phy_data & MII_AT001_PSSR_DPLX)
+		*duplex = FULL_DUPLEX;
+	else
+		*duplex = HALF_DUPLEX;
+
+	return 0;
+}
+
+int atl1e_restart_autoneg(struct atl1e_hw *hw)
+{
+	int err = 0;
+
+	err = atl1e_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
+	if (err)
+		return err;
+
+	if (hw->nic_type == athr_l1e || hw->nic_type == athr_l2e_revA) {
+		err = atl1e_write_phy_reg(hw, MII_AT001_CR,
+				       hw->mii_1000t_ctrl_reg);
+		if (err)
+			return err;
+	}
+
+	err = atl1e_write_phy_reg(hw, MII_BMCR,
+			MII_CR_RESET | MII_CR_AUTO_NEG_EN |
+			MII_CR_RESTART_AUTO_NEG);
+	return err;
+}
+