Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linux

4 files changed, 201 insertions, 103 deletions

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 62dee54af0a5..43976aa4dbb1 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		/* Calculate flash page address; use block erase (for speed) if
 		 * we're at a block boundary and need to erase the whole block.
 		 */
-		pageaddr = div_u64(instr->len, priv->page_size);
+		pageaddr = div_u64(instr->addr, priv->page_size);
 		do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
 		pageaddr = pageaddr << priv->page_offset;
 
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 92285d0089c2..af8b42e0a55b 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags,
 
 	ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
 	if (ret < 0) {
-		up_write(&sb->s_umount);
-		deactivate_super(sb);
+		deactivate_locked_super(sb);
 		return ret;
 	}
 
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index da41ea82941a..76beea40d2cf 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -842,6 +842,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_READID:
+		host->col_addr = 0;
 		send_read_id(host);
 		break;
 
@@ -878,6 +879,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	mtd->priv = this;
 	mtd->owner = THIS_MODULE;
 	mtd->dev.parent = &pdev->dev;
+	mtd->name = "mxc_nand";
 
 	/* 50 us command delay time */
 	this->chip_delay = 5;
@@ -893,8 +895,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	this->verify_buf = mxc_nand_verify_buf;
 
 	host->clk = clk_get(&pdev->dev, "nfc");
-	if (IS_ERR(host->clk))
+	if (IS_ERR(host->clk)) {
+		err = PTR_ERR(host->clk);
 		goto eclk;
+	}
 
 	clk_enable(host->clk);
 	host->clk_act = 1;
@@ -907,7 +911,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 
 	host->regs = ioremap(res->start, res->end - res->start + 1);
 	if (!host->regs) {
-		err = -EIO;
+		err = -ENOMEM;
 		goto eres;
 	}
 
@@ -1053,25 +1057,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct mtd_info *info = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
 	int ret = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
-
-	/* Disable the NFC clock */
-	clk_disable(nfc_clk);	/* FIXME */
+	if (mtd) {
+		ret = mtd->suspend(mtd);
+		/* Disable the NFC clock */
+		clk_disable(host->clk);
+	}
 
 	return ret;
 }
 
 static int mxcnd_resume(struct platform_device *pdev)
 {
-	struct mtd_info *info = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = platform_get_drvdata(pdev);
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
 	int ret = 0;
 
 	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
-	/* Enable the NFC clock */
-	clk_enable(nfc_clk);	/* FIXME */
+
+	if (mtd) {
+		/* Enable the NFC clock */
+		clk_enable(host->clk);
+		mtd->resume(mtd);
+	}
 
 	return ret;
 }
@@ -1092,13 +1106,7 @@ static struct platform_driver mxcnd_driver = {
 
 static int __init mxc_nd_init(void)
 {
-	/* Register the device driver structure. */
-	pr_info("MXC MTD nand Driver\n");
-	if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
-		printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
-		return -ENODEV;
-	}
-	return 0;
+	return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
 }
 
 static void __exit mxc_nd_cleanup(void)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 776756e4ebe5..01a105eda3f4 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -74,6 +74,14 @@ static struct nand_ecclayout nand_hw_eccoob = {
 
 struct s3c2410_nand_info;
 
+/**
+ * struct s3c2410_nand_mtd - driver MTD structure
+ * @mtd: The MTD instance to pass to the MTD layer.
+ * @chip: The NAND chip information.
+ * @set: The platform information supplied for this set of NAND chips.
+ * @info: Link back to the hardware information.
+ * @scan_res: The result from calling nand_scan_ident().
+*/
 struct s3c2410_nand_mtd {
 	struct mtd_info			mtd;
 	struct nand_chip		chip;
@@ -90,6 +98,21 @@ enum s3c_cpu_type {
 
 /* overview of the s3c2410 nand state */
 
+/**
+ * struct s3c2410_nand_info - NAND controller state.
+ * @mtds: An array of MTD instances on this controoler.
+ * @platform: The platform data for this board.
+ * @device: The platform device we bound to.
+ * @area: The IO area resource that came from request_mem_region().
+ * @clk: The clock resource for this controller.
+ * @regs: The area mapped for the hardware registers described by @area.
+ * @sel_reg: Pointer to the register controlling the NAND selection.
+ * @sel_bit: The bit in @sel_reg to select the NAND chip.
+ * @mtd_count: The number of MTDs created from this controller.
+ * @save_sel: The contents of @sel_reg to be saved over suspend.
+ * @clk_rate: The clock rate from @clk.
+ * @cpu_type: The exact type of this controller.
+ */
 struct s3c2410_nand_info {
 	/* mtd info */
 	struct nand_hw_control		controller;
@@ -145,12 +168,19 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info)
 
 #define NS_IN_KHZ 1000000
 
+/**
+ * s3c_nand_calc_rate - calculate timing data.
+ * @wanted: The cycle time in nanoseconds.
+ * @clk: The clock rate in kHz.
+ * @max: The maximum divider value.
+ *
+ * Calculate the timing value from the given parameters.
+ */
 static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 {
 	int result;
 
-	result = (wanted * clk) / NS_IN_KHZ;
-	result++;
+	result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ);
 
 	pr_debug("result %d from %ld, %d\n", result, clk, wanted);
 
@@ -169,13 +199,21 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
+/**
+ * s3c2410_nand_setrate - setup controller timing information.
+ * @info: The controller instance.
+ *
+ * Given the information supplied by the platform, calculate and set
+ * the necessary timing registers in the hardware to generate the
+ * necessary timing cycles to the hardware.
+ */
 static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
 	struct s3c2410_platform_nand *plat = info->platform;
 	int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
 	int tacls, twrph0, twrph1;
 	unsigned long clkrate = clk_get_rate(info->clk);
-	unsigned long set, cfg, mask;
+	unsigned long uninitialized_var(set), cfg, uninitialized_var(mask);
 	unsigned long flags;
 
 	/* calculate the timing information for the controller */
@@ -225,14 +263,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 		break;
 
 	default:
-		/* keep compiler happy */
-		mask = 0;
-		set = 0;
 		BUG();
 	}
 
-	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
 	local_irq_save(flags);
 
 	cfg = readl(info->regs + S3C2410_NFCONF);
@@ -242,9 +275,18 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 
 	local_irq_restore(flags);
 
+	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
 	return 0;
 }
 
+/**
+ * s3c2410_nand_inithw - basic hardware initialisation
+ * @info: The hardware state.
+ *
+ * Do the basic initialisation of the hardware, using s3c2410_nand_setrate()
+ * to setup the hardware access speeds and set the controller to be enabled.
+*/
 static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 {
 	int ret;
@@ -268,8 +310,19 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
 	return 0;
 }
 
-/* select chip */
-
+/**
+ * s3c2410_nand_select_chip - select the given nand chip
+ * @mtd: The MTD instance for this chip.
+ * @chip: The chip number.
+ *
+ * This is called by the MTD layer to either select a given chip for the
+ * @mtd instance, or to indicate that the access has finished and the
+ * chip can be de-selected.
+ *
+ * The routine ensures that the nFCE line is correctly setup, and any
+ * platform specific selection code is called to route nFCE to the specific
+ * chip.
+ */
 static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct s3c2410_nand_info *info;
@@ -530,7 +583,16 @@ static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	readsl(info->regs + S3C2440_NFDATA, buf, len / 4);
+
+	readsl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+	/* cleanup if we've got less than a word to do */
+	if (len & 3) {
+		buf += len & ~3;
+
+		for (; len & 3; len--)
+			*buf++ = readb(info->regs + S3C2440_NFDATA);
+	}
 }
 
 static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
@@ -542,7 +604,16 @@ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
 static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
-	writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
+
+	writesl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+	/* cleanup any fractional write */
+	if (len & 3) {
+		buf += len & ~3;
+
+		for (; len & 3; len--, buf++)
+			writeb(*buf, info->regs + S3C2440_NFDATA);
+	}
 }
 
 /* cpufreq driver support */
@@ -593,7 +664,7 @@ static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *inf
 
 /* device management functions */
 
-static int s3c2410_nand_remove(struct platform_device *pdev)
+static int s3c24xx_nand_remove(struct platform_device *pdev)
 {
 	struct s3c2410_nand_info *info = to_nand_info(pdev);
 
@@ -645,17 +716,31 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
 static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 				      struct s3c2410_nand_mtd *mtd,
 				      struct s3c2410_nand_set *set)
 {
+	struct mtd_partition *part_info;
+	int nr_part = 0;
+
 	if (set == NULL)
 		return add_mtd_device(&mtd->mtd);
 
-	if (set->nr_partitions > 0 && set->partitions != NULL) {
-		return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions);
+	if (set->nr_partitions == 0) {
+		mtd->mtd.name = set->name;
+		nr_part = parse_mtd_partitions(&mtd->mtd, part_probes,
+						&part_info, 0);
+	} else {
+		if (set->nr_partitions > 0 && set->partitions != NULL) {
+			nr_part = set->nr_partitions;
+			part_info = set->partitions;
+		}
 	}
 
+	if (nr_part > 0 && part_info)
+		return add_mtd_partitions(&mtd->mtd, part_info, nr_part);
+
 	return add_mtd_device(&mtd->mtd);
 }
 #else
@@ -667,11 +752,16 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
 }
 #endif
 
-/* s3c2410_nand_init_chip
+/**
+ * s3c2410_nand_init_chip - initialise a single instance of an chip
+ * @info: The base NAND controller the chip is on.
+ * @nmtd: The new controller MTD instance to fill in.
+ * @set: The information passed from the board specific platform data.
  *
- * init a single instance of an chip
-*/
-
+ * Initialise the given @nmtd from the information in @info and @set. This
+ * readies the structure for use with the MTD layer functions by ensuring
+ * all pointers are setup and the necessary control routines selected.
+ */
 static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 				   struct s3c2410_nand_mtd *nmtd,
 				   struct s3c2410_nand_set *set)
@@ -757,14 +847,40 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 
 	if (set->disable_ecc)
 		chip->ecc.mode	= NAND_ECC_NONE;
+
+	switch (chip->ecc.mode) {
+	case NAND_ECC_NONE:
+		dev_info(info->device, "NAND ECC disabled\n");
+		break;
+	case NAND_ECC_SOFT:
+		dev_info(info->device, "NAND soft ECC\n");
+		break;
+	case NAND_ECC_HW:
+		dev_info(info->device, "NAND hardware ECC\n");
+		break;
+	default:
+		dev_info(info->device, "NAND ECC UNKNOWN\n");
+		break;
+	}
+
+	/* If you use u-boot BBT creation code, specifying this flag will
+	 * let the kernel fish out the BBT from the NAND, and also skip the
+	 * full NAND scan that can take 1/2s or so. Little things... */
+	if (set->flash_bbt)
+		chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
 }
 
-/* s3c2410_nand_update_chip
+/**
+ * s3c2410_nand_update_chip - post probe update
+ * @info: The controller instance.
+ * @nmtd: The driver version of the MTD instance.
  *
- * post-probe chip update, to change any items, such as the
- * layout for large page nand
- */
-
+ * This routine is called after the chip probe has succesfully completed
+ * and the relevant per-chip information updated. This call ensure that
+ * we update the internal state accordingly.
+ *
+ * The internal state is currently limited to the ECC state information.
+*/
 static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 				     struct s3c2410_nand_mtd *nmtd)
 {
@@ -773,33 +889,33 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 	dev_dbg(info->device, "chip %p => page shift %d\n",
 		chip, chip->page_shift);
 
-	if (hardware_ecc) {
+	if (chip->ecc.mode != NAND_ECC_HW)
+		return;
+
 		/* change the behaviour depending on wether we are using
 		 * the large or small page nand device */
 
-		if (chip->page_shift > 10) {
-			chip->ecc.size	    = 256;
-			chip->ecc.bytes	    = 3;
-		} else {
-			chip->ecc.size	    = 512;
-			chip->ecc.bytes	    = 3;
-			chip->ecc.layout    = &nand_hw_eccoob;
-		}
+	if (chip->page_shift > 10) {
+		chip->ecc.size	    = 256;
+		chip->ecc.bytes	    = 3;
+	} else {
+		chip->ecc.size	    = 512;
+		chip->ecc.bytes	    = 3;
+		chip->ecc.layout    = &nand_hw_eccoob;
 	}
 }
 
-/* s3c2410_nand_probe
+/* s3c24xx_nand_probe
  *
  * called by device layer when it finds a device matching
  * one our driver can handled. This code checks to see if
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
 */
-
-static int s3c24xx_nand_probe(struct platform_device *pdev,
-			      enum s3c_cpu_type cpu_type)
+static int s3c24xx_nand_probe(struct platform_device *pdev)
 {
 	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
+	enum s3c_cpu_type cpu_type; 
 	struct s3c2410_nand_info *info;
 	struct s3c2410_nand_mtd *nmtd;
 	struct s3c2410_nand_set *sets;
@@ -809,6 +925,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 	int nr_sets;
 	int setno;
 
+	cpu_type = platform_get_device_id(pdev)->driver_data;
+
 	pr_debug("s3c2410_nand_probe(%p)\n", pdev);
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
@@ -922,7 +1040,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 	return 0;
 
  exit_error:
-	s3c2410_nand_remove(pdev);
+	s3c24xx_nand_remove(pdev);
 
 	if (err == 0)
 		err = -EINVAL;
@@ -983,50 +1101,30 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
 /* driver device registration */
 
-static int s3c2410_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2410);
-}
-
-static int s3c2440_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2440);
-}
-
-static int s3c2412_nand_probe(struct platform_device *dev)
-{
-	return s3c24xx_nand_probe(dev, TYPE_S3C2412);
-}
-
-static struct platform_driver s3c2410_nand_driver = {
-	.probe		= s3c2410_nand_probe,
-	.remove		= s3c2410_nand_remove,
-	.suspend	= s3c24xx_nand_suspend,
-	.resume		= s3c24xx_nand_resume,
-	.driver		= {
-		.name	= "s3c2410-nand",
-		.owner	= THIS_MODULE,
+static struct platform_device_id s3c24xx_driver_ids[] = {
+	{
+		.name		= "s3c2410-nand",
+		.driver_data	= TYPE_S3C2410,
+	}, {
+		.name		= "s3c2440-nand",
+		.driver_data	= TYPE_S3C2440,
+	}, {
+		.name		= "s3c2412-nand",
+		.driver_data	= TYPE_S3C2412,
 	},
+	{ }
 };
 
-static struct platform_driver s3c2440_nand_driver = {
-	.probe		= s3c2440_nand_probe,
-	.remove		= s3c2410_nand_remove,
-	.suspend	= s3c24xx_nand_suspend,
-	.resume		= s3c24xx_nand_resume,
-	.driver		= {
-		.name	= "s3c2440-nand",
-		.owner	= THIS_MODULE,
-	},
-};
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
-static struct platform_driver s3c2412_nand_driver = {
-	.probe		= s3c2412_nand_probe,
-	.remove		= s3c2410_nand_remove,
+static struct platform_driver s3c24xx_nand_driver = {
+	.probe		= s3c24xx_nand_probe,
+	.remove		= s3c24xx_nand_remove,
 	.suspend	= s3c24xx_nand_suspend,
 	.resume		= s3c24xx_nand_resume,
+	.id_table	= s3c24xx_driver_ids,
 	.driver		= {
-		.name	= "s3c2412-nand",
+		.name	= "s3c24xx-nand",
 		.owner	= THIS_MODULE,
 	},
 };
@@ -1035,16 +1133,12 @@ static int __init s3c2410_nand_init(void)
 {
 	printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n");
 
-	platform_driver_register(&s3c2412_nand_driver);
-	platform_driver_register(&s3c2440_nand_driver);
-	return platform_driver_register(&s3c2410_nand_driver);
+	return platform_driver_register(&s3c24xx_nand_driver);
 }
 
 static void __exit s3c2410_nand_exit(void)
 {
-	platform_driver_unregister(&s3c2412_nand_driver);
-	platform_driver_unregister(&s3c2440_nand_driver);
-	platform_driver_unregister(&s3c2410_nand_driver);
+	platform_driver_unregister(&s3c24xx_nand_driver);
 }
 
 module_init(s3c2410_nand_init);
@@ -1053,6 +1147,3 @@ module_exit(s3c2410_nand_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
-MODULE_ALIAS("platform:s3c2410-nand");
-MODULE_ALIAS("platform:s3c2412-nand");
-MODULE_ALIAS("platform:s3c2440-nand");