Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

4 files changed, 25 insertions, 9 deletions

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 26b14f9fcac6..6bc9618af094 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -168,12 +168,25 @@ static inline int write_disable(struct m25p *flash)
  */
 static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable)
 {
+	int status;
+	bool need_wren = false;
+
 	switch (JEDEC_MFR(jedec_id)) {
-	case CFI_MFR_MACRONIX:
 	case CFI_MFR_ST: /* Micron, actually */
+		/* Some Micron need WREN command; all will accept it */
+		need_wren = true;
+	case CFI_MFR_MACRONIX:
 	case 0xEF /* winbond */:
+		if (need_wren)
+			write_enable(flash);
+
 		flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B;
-		return spi_write(flash->spi, flash->command, 1);
+		status = spi_write(flash->spi, flash->command, 1);
+
+		if (need_wren)
+			write_disable(flash);
+
+		return status;
 	default:
 		/* Spansion style */
 		flash->command[0] = OPCODE_BRWR;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 59ab0692f0b9..a9830ff8e3f3 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -349,7 +349,7 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
 
 int common_nfc_set_geometry(struct gpmi_nand_data *this)
 {
-	return set_geometry_by_ecc_info(this) ? 0 : legacy_set_geometry(this);
+	return legacy_set_geometry(this);
 }
 
 struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 7ed4841327f2..d340b2f198c6 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2869,10 +2869,8 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
 
 	len = le16_to_cpu(p->ext_param_page_length) * 16;
 	ep = kmalloc(len, GFP_KERNEL);
-	if (!ep) {
-		ret = -ENOMEM;
-		goto ext_out;
-	}
+	if (!ep)
+		return -ENOMEM;
 
 	/* Send our own NAND_CMD_PARAM. */
 	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
@@ -2920,7 +2918,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
 	}
 
 	pr_info("ONFI extended param page detected.\n");
-	return 0;
+	ret = 0;
 
 ext_out:
 	kfree(ep);
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index dd03dfdfb0d6..c28d4e29af1a 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1320,7 +1320,12 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 	for (cs = 0; cs < pdata->num_cs; cs++) {
 		struct mtd_info *mtd = info->host[cs]->mtd;
 
-		mtd->name = pdev->name;
+		/*
+		 * The mtd name matches the one used in 'mtdparts' kernel
+		 * parameter. This name cannot be changed or otherwise
+		 * user's mtd partitions configuration would get broken.
+		 */
+		mtd->name = "pxa3xx_nand-0";
 		info->cs = cs;
 		ret = pxa3xx_nand_scan(mtd);
 		if (ret) {