mmci: Add support for ST Micro derivate

This patch adds support for the ST Microelectronics version of
the PL180 PrimeCell. They use designer ID 0x80 and have a few
alterations/bugfixes related to open drain and HW flow control.
They also add some SDIO registers, I am unsure if these are
in ST HW only or if this is things also added in later ARM
revisions, but they are included in the mmci.h file for
completeness.

Signed-off-by: Linus Walleij <linus.walleij@ericsson.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

2 files changed, 61 insertions, 4 deletions

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1bcbdd6763ac..2909bbc8ad00 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -430,6 +430,8 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
+		if (host->hw_designer == 0x80)
+			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 	}
 
@@ -440,15 +442,27 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		break;
 	case MMC_POWER_UP:
-		pwr |= MCI_PWR_UP;
-		break;
+		/* The ST version does not have this, fall through to POWER_ON */
+		if (host->hw_designer != 0x80) {
+			pwr |= MCI_PWR_UP;
+			break;
+		}
 	case MMC_POWER_ON:
 		pwr |= MCI_PWR_ON;
 		break;
 	}
 
-	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-		pwr |= MCI_ROD;
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+		if (host->hw_designer != 0x80)
+			pwr |= MCI_ROD;
+		else {
+			/*
+			 * The ST Micro variant use the ROD bit for something
+			 * else and only has OD (Open Drain).
+			 */
+			pwr |= MCI_OD;
+		}
+	}
 
 	writel(clk, host->base + MMCICLOCK);
 
@@ -500,6 +514,12 @@ static int mmci_probe(struct amba_device *dev, void *id)
 	}
 
 	host = mmc_priv(mmc);
+	/* Bits 12 thru 19 is the designer */
+	host->hw_designer = (dev->periphid >> 12) & 0xff;
+	/* Bits 20 thru 23 is the revison */
+	host->hw_revision = (dev->periphid >> 20) & 0xf;
+	DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
+	DBG(host, "revision = 0x%01x\n", host->hw_revision);
 	host->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
@@ -693,6 +713,15 @@ static struct amba_id mmci_ids[] = {
 		.id	= 0x00041181,
 		.mask	= 0x000fffff,
 	},
+	/* ST Micro variants */
+	{
+		.id     = 0x00180180,
+		.mask   = 0x00ffffff,
+	},
+	{
+		.id     = 0x00280180,
+		.mask   = 0x00ffffff,
+	},
 	{ 0, 0 },
 };
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0f39c490f022..0441bac1c0ec 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -11,13 +11,23 @@
 #define MCI_PWR_OFF		0x00
 #define MCI_PWR_UP		0x02
 #define MCI_PWR_ON		0x03
+#define MCI_DATA2DIREN		(1 << 2)
+#define MCI_CMDDIREN		(1 << 3)
+#define MCI_DATA0DIREN		(1 << 4)
+#define MCI_DATA31DIREN		(1 << 5)
 #define MCI_OD			(1 << 6)
 #define MCI_ROD			(1 << 7)
+/* The ST Micro version does not have ROD */
+#define MCI_FBCLKEN		(1 << 7)
+#define MCI_DATA74DIREN		(1 << 8)
 
 #define MMCICLOCK		0x004
 #define MCI_CLK_ENABLE		(1 << 8)
 #define MCI_CLK_PWRSAVE		(1 << 9)
 #define MCI_CLK_BYPASS		(1 << 10)
+#define MCI_WIDE_BUS		(1 << 11)
+/* HW flow control on the ST Micro version */
+#define MCI_FCEN		(1 << 13)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -26,6 +36,10 @@
 #define MCI_CPSM_INTERRUPT	(1 << 8)
 #define MCI_CPSM_PENDING	(1 << 9)
 #define MCI_CPSM_ENABLE		(1 << 10)
+#define MCI_SDIO_SUSP		(1 << 11)
+#define MCI_ENCMD_COMPL		(1 << 12)
+#define MCI_NIEN		(1 << 13)
+#define MCI_CE_ATACMD		(1 << 14)
 
 #define MMCIRESPCMD		0x010
 #define MMCIRESPONSE0		0x014
@@ -39,6 +53,11 @@
 #define MCI_DPSM_DIRECTION	(1 << 1)
 #define MCI_DPSM_MODE		(1 << 2)
 #define MCI_DPSM_DMAENABLE	(1 << 3)
+#define MCI_DPSM_BLOCKSIZE	(1 << 4)
+#define MCI_DPSM_RWSTART	(1 << 8)
+#define MCI_DPSM_RWSTOP		(1 << 9)
+#define MCI_DPSM_RWMOD		(1 << 10)
+#define MCI_DPSM_SDIOEN		(1 << 11)
 
 #define MMCIDATACNT		0x030
 #define MMCISTATUS		0x034
@@ -63,6 +82,8 @@
 #define MCI_RXFIFOEMPTY		(1 << 19)
 #define MCI_TXDATAAVLBL		(1 << 20)
 #define MCI_RXDATAAVLBL		(1 << 21)
+#define MCI_SDIOIT		(1 << 22)
+#define MCI_CEATAEND		(1 << 23)
 
 #define MMCICLEAR		0x038
 #define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -75,6 +96,8 @@
 #define MCI_CMDSENTCLR		(1 << 7)
 #define MCI_DATAENDCLR		(1 << 8)
 #define MCI_DATABLOCKENDCLR	(1 << 10)
+#define MCI_SDIOITC		(1 << 22)
+#define MCI_CEATAENDC		(1 << 23)
 
 #define MMCIMASK0		0x03c
 #define MCI_CMDCRCFAILMASK	(1 << 0)
@@ -98,6 +121,8 @@
 #define MCI_RXFIFOEMPTYMASK	(1 << 19)
 #define MCI_TXDATAAVLBLMASK	(1 << 20)
 #define MCI_RXDATAAVLBLMASK	(1 << 21)
+#define MCI_SDIOITMASK		(1 << 22)
+#define MCI_CEATAENDMASK	(1 << 23)
 
 #define MMCIMASK1		0x040
 #define MMCIFIFOCNT		0x048
@@ -136,6 +161,9 @@ struct mmci_host {
 	u32			pwr;
 	struct mmc_platform_data *plat;
 
+	u8			hw_designer;
+	u8			hw_revision:4;
+
 	struct timer_list	timer;
 	unsigned int		oldstat;