diff options
author | David Vrabel <david.vrabel@csr.com> | 2010-09-02 14:15:08 +0000 |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2010-10-23 21:11:11 +0800 |
commit | 53f3a9e26ed5a94bd3caf732e7635692cd3c4402 (patch) | |
tree | 4324614f7891ff66eea931f146fec64769b9bb1e /drivers/mmc/host | |
parent | a36274e0184193e393fb82957925c3981a6b0477 (diff) | |
download | blackbird-op-linux-53f3a9e26ed5a94bd3caf732e7635692cd3c4402.tar.gz blackbird-op-linux-53f3a9e26ed5a94bd3caf732e7635692cd3c4402.zip |
mmc: USB SD Host Controller (USHC) driver
Add a driver for USB SD Host Controller devices. These devices are
Cypress Astoria chips with firmware compliant with issue 2 of CSR's USHC
specification.
[cjb: adapt to block layer deprecation of max_{hw,phys}_segs]
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r-- | drivers/mmc/host/Kconfig | 14 | ||||
-rw-r--r-- | drivers/mmc/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/mmc/host/ushc.c | 566 |
3 files changed, 581 insertions, 0 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 68d12794cfd9..8de7b9e8fc51 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -451,3 +451,17 @@ config MMC_JZ4740 SoCs. If you have a board based on such a SoC and with a SD/MMC slot, say Y or M here. + +config MMC_USHC + tristate "USB SD Host Controller (USHC) support" + depends on USB + help + This selects support for USB SD Host Controllers based on + the Cypress Astoria chip with firmware compliant with CSR's + USB SD Host Controller specification (CS-118793-SP). + + CSR boards with this device include: USB<>SDIO (M1985v2), + and Ultrasira. + + Note: These controllers only support SDIO cards and do not + support MMC or SD memory cards. diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 840bcb52d82f..f7fb7eb234b9 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o +obj-$(CONFIG_MMC_USHC) += ushc.o obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-platform.o sdhci-platform-y := sdhci-pltfm.o diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c new file mode 100644 index 000000000000..b4ead4a13c98 --- /dev/null +++ b/drivers/mmc/host/ushc.c @@ -0,0 +1,566 @@ +/* + * USB SD Host Controller (USHC) controller driver. + * + * Copyright (C) 2010 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * Notes: + * - Only version 2 devices are supported. + * - Version 2 devices only support SDIO cards/devices (R2 response is + * unsupported). + * + * References: + * [USHC] USB SD Host Controller specification (CS-118793-SP) + */ +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/mmc/host.h> + +enum ushc_request { + USHC_GET_CAPS = 0x00, + USHC_HOST_CTRL = 0x01, + USHC_PWR_CTRL = 0x02, + USHC_CLK_FREQ = 0x03, + USHC_EXEC_CMD = 0x04, + USHC_READ_RESP = 0x05, + USHC_RESET = 0x06, +}; + +enum ushc_request_type { + USHC_GET_CAPS_TYPE = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USHC_HOST_CTRL_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USHC_PWR_CTRL_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USHC_CLK_FREQ_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USHC_EXEC_CMD_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USHC_READ_RESP_TYPE = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USHC_RESET_TYPE = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, +}; + +#define USHC_GET_CAPS_VERSION_MASK 0xff +#define USHC_GET_CAPS_3V3 (1 << 8) +#define USHC_GET_CAPS_3V0 (1 << 9) +#define USHC_GET_CAPS_1V8 (1 << 10) +#define USHC_GET_CAPS_HIGH_SPD (1 << 16) + +#define USHC_HOST_CTRL_4BIT (1 << 1) +#define USHC_HOST_CTRL_HIGH_SPD (1 << 0) + +#define USHC_PWR_CTRL_OFF 0x00 +#define USHC_PWR_CTRL_3V3 0x01 +#define USHC_PWR_CTRL_3V0 0x02 +#define USHC_PWR_CTRL_1V8 0x03 + +#define USHC_READ_RESP_BUSY (1 << 4) +#define USHC_READ_RESP_ERR_TIMEOUT (1 << 3) +#define USHC_READ_RESP_ERR_CRC (1 << 2) +#define USHC_READ_RESP_ERR_DAT (1 << 1) +#define USHC_READ_RESP_ERR_CMD (1 << 0) +#define USHC_READ_RESP_ERR_MASK 0x0f + +struct ushc_cbw { + __u8 signature; + __u8 cmd_idx; + __le16 block_size; + __le32 arg; +} __attribute__((packed)); + +#define USHC_CBW_SIGNATURE 'C' + +struct ushc_csw { + __u8 signature; + __u8 status; + __le32 response; +} __attribute__((packed)); + +#define USHC_CSW_SIGNATURE 'S' + +struct ushc_int_data { + u8 status; + u8 reserved[3]; +}; + +#define USHC_INT_STATUS_SDIO_INT (1 << 1) +#define USHC_INT_STATUS_CARD_PRESENT (1 << 0) + + +struct ushc_data { + struct usb_device *usb_dev; + struct mmc_host *mmc; + + struct urb *int_urb; + struct ushc_int_data *int_data; + + struct urb *cbw_urb; + struct ushc_cbw *cbw; + + struct urb *data_urb; + + struct urb *csw_urb; + struct ushc_csw *csw; + + spinlock_t lock; + struct mmc_request *current_req; + u32 caps; + u16 host_ctrl; + unsigned long flags; + u8 last_status; + int clock_freq; +}; + +#define DISCONNECTED 0 +#define INT_EN 1 +#define IGNORE_NEXT_INT 2 + +static void data_callback(struct urb *urb); + +static int ushc_hw_reset(struct ushc_data *ushc) +{ + return usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0), + USHC_RESET, USHC_RESET_TYPE, + 0, 0, NULL, 0, 100); +} + +static int ushc_hw_get_caps(struct ushc_data *ushc) +{ + int ret; + int version; + + ret = usb_control_msg(ushc->usb_dev, usb_rcvctrlpipe(ushc->usb_dev, 0), + USHC_GET_CAPS, USHC_GET_CAPS_TYPE, + 0, 0, &ushc->caps, sizeof(ushc->caps), 100); + if (ret < 0) + return ret; + + ushc->caps = le32_to_cpu(ushc->caps); + + version = ushc->caps & USHC_GET_CAPS_VERSION_MASK; + if (version != 0x02) { + dev_err(&ushc->usb_dev->dev, "controller version %d is not supported\n", version); + return -EINVAL; + } + + return 0; +} + +static int ushc_hw_set_host_ctrl(struct ushc_data *ushc, u16 mask, u16 val) +{ + u16 host_ctrl; + int ret; + + host_ctrl = (ushc->host_ctrl & ~mask) | val; + ret = usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0), + USHC_HOST_CTRL, USHC_HOST_CTRL_TYPE, + host_ctrl, 0, NULL, 0, 100); + if (ret < 0) + return ret; + ushc->host_ctrl = host_ctrl; + return 0; +} + +static void int_callback(struct urb *urb) +{ + struct ushc_data *ushc = urb->context; + u8 status, last_status; + + if (urb->status < 0) + return; + + status = ushc->int_data->status; + last_status = ushc->last_status; + ushc->last_status = status; + + /* + * Ignore the card interrupt status on interrupt transfers that + * were submitted while card interrupts where disabled. + * + * This avoid occasional spurious interrupts when enabling + * interrupts immediately after clearing the source on the card. + */ + + if (!test_and_clear_bit(IGNORE_NEXT_INT, &ushc->flags) + && test_bit(INT_EN, &ushc->flags) + && status & USHC_INT_STATUS_SDIO_INT) { + mmc_signal_sdio_irq(ushc->mmc); + } + + if ((status ^ last_status) & USHC_INT_STATUS_CARD_PRESENT) + mmc_detect_change(ushc->mmc, msecs_to_jiffies(100)); + + if (!test_bit(INT_EN, &ushc->flags)) + set_bit(IGNORE_NEXT_INT, &ushc->flags); + usb_submit_urb(ushc->int_urb, GFP_ATOMIC); +} + +static void cbw_callback(struct urb *urb) +{ + struct ushc_data *ushc = urb->context; + + if (urb->status != 0) { + usb_unlink_urb(ushc->data_urb); + usb_unlink_urb(ushc->csw_urb); + } +} + +static void data_callback(struct urb *urb) +{ + struct ushc_data *ushc = urb->context; + + if (urb->status != 0) + usb_unlink_urb(ushc->csw_urb); +} + +static void csw_callback(struct urb *urb) +{ + struct ushc_data *ushc = urb->context; + struct mmc_request *req = ushc->current_req; + int status; + + status = ushc->csw->status; + + if (urb->status != 0) { + req->cmd->error = urb->status; + } else if (status & USHC_READ_RESP_ERR_CMD) { + if (status & USHC_READ_RESP_ERR_CRC) + req->cmd->error = -EIO; + else + req->cmd->error = -ETIMEDOUT; + } + if (req->data) { + if (status & USHC_READ_RESP_ERR_DAT) { + if (status & USHC_READ_RESP_ERR_CRC) + req->data->error = -EIO; + else + req->data->error = -ETIMEDOUT; + req->data->bytes_xfered = 0; + } else { + req->data->bytes_xfered = req->data->blksz * req->data->blocks; + } + } + + req->cmd->resp[0] = le32_to_cpu(ushc->csw->response); + + mmc_request_done(ushc->mmc, req); +} + +static void ushc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct ushc_data *ushc = mmc_priv(mmc); + int ret; + unsigned long flags; + + spin_lock_irqsave(&ushc->lock, flags); + + if (test_bit(DISCONNECTED, &ushc->flags)) { + ret = -ENODEV; + goto out; + } + + /* Version 2 firmware doesn't support the R2 response format. */ + if (req->cmd->flags & MMC_RSP_136) { + ret = -EINVAL; + goto out; + } + + /* The Astoria's data FIFOs don't work with clock speeds < 5MHz so + limit commands with data to 6MHz or more. */ + if (req->data && ushc->clock_freq < 6000000) { + ret = -EINVAL; + goto out; + } + + ushc->current_req = req; + + /* Start cmd with CBW. */ + ushc->cbw->cmd_idx = cpu_to_le16(req->cmd->opcode); + if (req->data) + ushc->cbw->block_size = cpu_to_le16(req->data->blksz); + else + ushc->cbw->block_size = 0; + ushc->cbw->arg = cpu_to_le32(req->cmd->arg); + + ret = usb_submit_urb(ushc->cbw_urb, GFP_ATOMIC); + if (ret < 0) + goto out; + + /* Submit data (if any). */ + if (req->data) { + struct mmc_data *data = req->data; + int pipe; + + if (data->flags & MMC_DATA_READ) + pipe = usb_rcvbulkpipe(ushc->usb_dev, 6); + else + pipe = usb_sndbulkpipe(ushc->usb_dev, 2); + + usb_fill_bulk_urb(ushc->data_urb, ushc->usb_dev, pipe, + sg_virt(data->sg), data->sg->length, + data_callback, ushc); + ret = usb_submit_urb(ushc->data_urb, GFP_ATOMIC); + if (ret < 0) + goto out; + } + + /* Submit CSW. */ + ret = usb_submit_urb(ushc->csw_urb, GFP_ATOMIC); + if (ret < 0) + goto out; + +out: + spin_unlock_irqrestore(&ushc->lock, flags); + if (ret < 0) { + usb_unlink_urb(ushc->cbw_urb); + usb_unlink_urb(ushc->data_urb); + req->cmd->error = ret; + mmc_request_done(mmc, req); + } +} + +static int ushc_set_power(struct ushc_data *ushc, unsigned char power_mode) +{ + u16 voltage; + + switch (power_mode) { + case MMC_POWER_OFF: + voltage = USHC_PWR_CTRL_OFF; + break; + case MMC_POWER_UP: + case MMC_POWER_ON: + voltage = USHC_PWR_CTRL_3V3; + break; + default: + return -EINVAL; + } + + return usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0), + USHC_PWR_CTRL, USHC_PWR_CTRL_TYPE, + voltage, 0, NULL, 0, 100); +} + +static int ushc_set_bus_width(struct ushc_data *ushc, int bus_width) +{ + return ushc_hw_set_host_ctrl(ushc, USHC_HOST_CTRL_4BIT, + bus_width == 4 ? USHC_HOST_CTRL_4BIT : 0); +} + +static int ushc_set_bus_freq(struct ushc_data *ushc, int clk, bool enable_hs) +{ + int ret; + + /* Hardware can't detect interrupts while the clock is off. */ + if (clk == 0) + clk = 400000; + + ret = ushc_hw_set_host_ctrl(ushc, USHC_HOST_CTRL_HIGH_SPD, + enable_hs ? USHC_HOST_CTRL_HIGH_SPD : 0); + if (ret < 0) + return ret; + + ret = usb_control_msg(ushc->usb_dev, usb_sndctrlpipe(ushc->usb_dev, 0), + USHC_CLK_FREQ, USHC_CLK_FREQ_TYPE, + clk & 0xffff, (clk >> 16) & 0xffff, NULL, 0, 100); + if (ret < 0) + return ret; + + ushc->clock_freq = clk; + return 0; +} + +static void ushc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct ushc_data *ushc = mmc_priv(mmc); + + ushc_set_power(ushc, ios->power_mode); + ushc_set_bus_width(ushc, 1 << ios->bus_width); + ushc_set_bus_freq(ushc, ios->clock, ios->timing == MMC_TIMING_SD_HS); +} + +static int ushc_get_cd(struct mmc_host *mmc) +{ + struct ushc_data *ushc = mmc_priv(mmc); + + return !!(ushc->last_status & USHC_INT_STATUS_CARD_PRESENT); +} + +static void ushc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct ushc_data *ushc = mmc_priv(mmc); + + if (enable) + set_bit(INT_EN, &ushc->flags); + else + clear_bit(INT_EN, &ushc->flags); +} + +static void ushc_clean_up(struct ushc_data *ushc) +{ + usb_free_urb(ushc->int_urb); + usb_free_urb(ushc->csw_urb); + usb_free_urb(ushc->data_urb); + usb_free_urb(ushc->cbw_urb); + + kfree(ushc->int_data); + kfree(ushc->cbw); + kfree(ushc->csw); + + mmc_free_host(ushc->mmc); +} + +static const struct mmc_host_ops ushc_ops = { + .request = ushc_request, + .set_ios = ushc_set_ios, + .get_cd = ushc_get_cd, + .enable_sdio_irq = ushc_enable_sdio_irq, +}; + +static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *usb_dev = interface_to_usbdev(intf); + struct mmc_host *mmc; + struct ushc_data *ushc; + int ret = -ENOMEM; + + mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev); + if (mmc == NULL) + return -ENOMEM; + ushc = mmc_priv(mmc); + usb_set_intfdata(intf, ushc); + + ushc->usb_dev = usb_dev; + ushc->mmc = mmc; + + spin_lock_init(&ushc->lock); + + ret = ushc_hw_reset(ushc); + if (ret < 0) + goto err; + + /* Read capabilities. */ + ret = ushc_hw_get_caps(ushc); + if (ret < 0) + goto err; + + mmc->ops = &ushc_ops; + + mmc->f_min = 400000; + mmc->f_max = 50000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; + mmc->caps |= (ushc->caps & USHC_GET_CAPS_HIGH_SPD) ? MMC_CAP_SD_HIGHSPEED : 0; + + mmc->max_seg_size = 512*511; + mmc->max_segs = 1; + mmc->max_req_size = 512*511; + mmc->max_blk_size = 512; + mmc->max_blk_count = 511; + + ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL); + if (ushc->int_urb == NULL) + goto err; + ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL); + if (ushc->int_data == NULL) + goto err; + usb_fill_int_urb(ushc->int_urb, ushc->usb_dev, + usb_rcvintpipe(usb_dev, + intf->cur_altsetting->endpoint[0].desc.bEndpointAddress), + ushc->int_data, sizeof(struct ushc_int_data), + int_callback, ushc, + intf->cur_altsetting->endpoint[0].desc.bInterval); + + ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL); + if (ushc->cbw_urb == NULL) + goto err; + ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); + if (ushc->cbw == NULL) + goto err; + ushc->cbw->signature = USHC_CBW_SIGNATURE; + + usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2), + ushc->cbw, sizeof(struct ushc_cbw), + cbw_callback, ushc); + + ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL); + if (ushc->data_urb == NULL) + goto err; + + ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL); + if (ushc->csw_urb == NULL) + goto err; + ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL); + if (ushc->csw == NULL) + goto err; + usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6), + ushc->csw, sizeof(struct ushc_csw), + csw_callback, ushc); + + ret = mmc_add_host(ushc->mmc); + if (ret) + goto err; + + ret = usb_submit_urb(ushc->int_urb, GFP_KERNEL); + if (ret < 0) { + mmc_remove_host(ushc->mmc); + goto err; + } + + return 0; + +err: + ushc_clean_up(ushc); + return ret; +} + +static void ushc_disconnect(struct usb_interface *intf) +{ + struct ushc_data *ushc = usb_get_intfdata(intf); + + spin_lock_irq(&ushc->lock); + set_bit(DISCONNECTED, &ushc->flags); + spin_unlock_irq(&ushc->lock); + + usb_kill_urb(ushc->int_urb); + usb_kill_urb(ushc->cbw_urb); + usb_kill_urb(ushc->data_urb); + usb_kill_urb(ushc->csw_urb); + + mmc_remove_host(ushc->mmc); + + ushc_clean_up(ushc); +} + +static struct usb_device_id ushc_id_table[] = { + /* CSR USB SD Host Controller */ + { USB_DEVICE(0x0a12, 0x5d10) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, ushc_id_table); + +static struct usb_driver ushc_driver = { + .name = "ushc", + .id_table = ushc_id_table, + .probe = ushc_probe, + .disconnect = ushc_disconnect, +}; + +static int __init ushc_init(void) +{ + return usb_register(&ushc_driver); +} +module_init(ushc_init); + +static void __exit ushc_exit(void) +{ + usb_deregister(&ushc_driver); +} +module_exit(ushc_exit); + +MODULE_DESCRIPTION("USB SD Host Controller driver"); +MODULE_AUTHOR("David Vrabel <david.vrabel@csr.com>"); +MODULE_LICENSE("GPL"); |