summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/card
diff options
context:
space:
mode:
authorUlf Hansson <ulf.hansson@linaro.org>2014-01-14 21:31:35 +0100
committerChris Ball <chris@printf.net>2014-02-23 10:41:11 -0500
commitbb5cba40dc7f079ea7ee3ae760b7c388b6eb5fc3 (patch)
tree2a2ff4d4f77b1e82d115ce9b44cae87b4f919805 /drivers/mmc/card
parent95a91298fc09db0c21193ace96d1934598dd92dd (diff)
downloadblackbird-op-linux-bb5cba40dc7f079ea7ee3ae760b7c388b6eb5fc3.tar.gz
blackbird-op-linux-bb5cba40dc7f079ea7ee3ae760b7c388b6eb5fc3.zip
mmc: block: Fixup busy detection while invoking stop cmd at recovery
When sending a stop command at the recovery path, use a R1B response when the failing data request are a WRITE. Thus we also care about the busy detection completion in this case. For a failing READ request, we use a R1 response for the stop command, since we don't need to care about busy detection in this case. To align behavior between hosts supporting MMC_CAP_WAIT_WHILE_BUSY and those who are not, we add a CMD13 polling method for the card's status. We also respect whether the host has specified the max_busy_timeout, which means we may fallback to CMD13 polling if the timeout is greater than what the host are able to support. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
Diffstat (limited to 'drivers/mmc/card')
-rw-r--r--drivers/mmc/card/block.c83
1 files changed, 55 insertions, 28 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 813ec83b74c9..452782bffebc 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -721,19 +721,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
return result;
}
-static int send_stop(struct mmc_card *card, u32 *status)
-{
- struct mmc_command cmd = {0};
- int err;
-
- cmd.opcode = MMC_STOP_TRANSMISSION;
- cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, 5);
- if (err == 0)
- *status = cmd.resp[0];
- return err;
-}
-
static int get_card_status(struct mmc_card *card, u32 *status, int retries)
{
struct mmc_command cmd = {0};
@@ -797,6 +784,51 @@ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
return err;
}
+static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
+ struct request *req, int *gen_err, u32 *stop_status)
+{
+ struct mmc_host *host = card->host;
+ struct mmc_command cmd = {0};
+ int err;
+ bool use_r1b_resp = rq_data_dir(req) == WRITE;
+
+ /*
+ * Normally we use R1B responses for WRITE, but in cases where the host
+ * has specified a max_busy_timeout we need to validate it. A failure
+ * means we need to prevent the host from doing hw busy detection, which
+ * is done by converting to a R1 response instead.
+ */
+ if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+ use_r1b_resp = false;
+
+ cmd.opcode = MMC_STOP_TRANSMISSION;
+ if (use_r1b_resp) {
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ cmd.busy_timeout = timeout_ms;
+ } else {
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, 5);
+ if (err)
+ return err;
+
+ *stop_status = cmd.resp[0];
+
+ /* No need to check card status in case of READ. */
+ if (rq_data_dir(req) == READ)
+ return 0;
+
+ if (!mmc_host_is_spi(host) &&
+ (*stop_status & R1_ERROR)) {
+ pr_err("%s: %s: general error sending stop command, resp %#x\n",
+ req->rq_disk->disk_name, __func__, *stop_status);
+ *gen_err = 1;
+ }
+
+ return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err);
+}
+
#define ERR_NOMEDIUM 3
#define ERR_RETRY 2
#define ERR_ABORT 1
@@ -913,26 +945,21 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
*/
if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
R1_CURRENT_STATE(status) == R1_STATE_RCV) {
- err = send_stop(card, &stop_status);
- if (err)
+ err = send_stop(card,
+ DIV_ROUND_UP(brq->data.timeout_ns, 1000000),
+ req, gen_err, &stop_status);
+ if (err) {
pr_err("%s: error %d sending stop command\n",
req->rq_disk->disk_name, err);
-
- /*
- * If the stop cmd also timed out, the card is probably
- * not present, so abort. Other errors are bad news too.
- */
- if (err)
+ /*
+ * If the stop cmd also timed out, the card is probably
+ * not present, so abort. Other errors are bad news too.
+ */
return ERR_ABORT;
+ }
+
if (stop_status & R1_CARD_ECC_FAILED)
*ecc_err = 1;
- if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
- if (stop_status & R1_ERROR) {
- pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
- req->rq_disk->disk_name, __func__,
- stop_status);
- *gen_err = 1;
- }
}
/* Check for set block count errors */
OpenPOWER on IntegriCloud