mfd: add driver for sequencer serial port

TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port
device.  It has a built-in programmable execution engine that can be programmed
to operate as almost any serial bus (I2C, SPI, EasyScale, and others).

This patch adds a driver for this controller device.  The driver does not
expose a user-land interface.  Protocol drivers built on top of this layer are
expected to remain in-kernel.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

3 files changed, 488 insertions, 0 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fd018366d670..0284c53c210c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -81,6 +81,17 @@ config MFD_DM355EVM_MSP
 	  boards.  MSP430 firmware manages resets and power sequencing,
 	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
 
+config MFD_TI_SSP
+	tristate "TI Sequencer Serial Port support"
+	depends on ARCH_DAVINCI_TNETV107X
+	select MFD_CORE
+	---help---
+	  Say Y here if you want support for the Sequencer Serial Port
+	  in a Texas Instruments TNETV107X SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti-ssp.
+
 config HTC_EGPIO
 	bool "HTC EGPIO support"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a54e2c7c6a1c..c56b6c7232ed 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
 
 obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
+obj-$(CONFIG_MFD_TI_SSP)	+= ti-ssp.o
 
 obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
 obj-$(CONFIG_MFD_TC3589X)	+= tc3589x.o
diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c
new file mode 100644
index 000000000000..af9ab0e5ca64
--- /dev/null
+++ b/drivers/mfd/ti-ssp.c
@@ -0,0 +1,476 @@
+/*
+ * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
+ *
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ti_ssp.h>
+
+/* Register Offsets */
+#define REG_REV		0x00
+#define REG_IOSEL_1	0x04
+#define REG_IOSEL_2	0x08
+#define REG_PREDIV	0x0c
+#define REG_INTR_ST	0x10
+#define REG_INTR_EN	0x14
+#define REG_TEST_CTRL	0x18
+
+/* Per port registers */
+#define PORT_CFG_2	0x00
+#define PORT_ADDR	0x04
+#define PORT_DATA	0x08
+#define PORT_CFG_1	0x0c
+#define PORT_STATE	0x10
+
+#define SSP_PORT_CONFIG_MASK	(SSP_EARLY_DIN | SSP_DELAY_DOUT)
+#define SSP_PORT_CLKRATE_MASK	0x0f
+
+#define SSP_SEQRAM_WR_EN	BIT(4)
+#define SSP_SEQRAM_RD_EN	BIT(5)
+#define SSP_START		BIT(15)
+#define SSP_BUSY		BIT(10)
+#define SSP_PORT_ASL		BIT(7)
+#define SSP_PORT_CFO1		BIT(6)
+
+#define SSP_PORT_SEQRAM_SIZE	32
+
+static const int ssp_port_base[]   = {0x040, 0x080};
+static const int ssp_port_seqram[] = {0x100, 0x180};
+
+struct ti_ssp {
+	struct resource		*res;
+	struct device		*dev;
+	void __iomem		*regs;
+	spinlock_t		lock;
+	struct clk		*clk;
+	int			irq;
+	wait_queue_head_t	wqh;
+
+	/*
+	 * Some of the iosel2 register bits always read-back as 0, we need to
+	 * remember these values so that we don't clobber previously set
+	 * values.
+	 */
+	u32			iosel2;
+};
+
+static inline struct ti_ssp *dev_to_ssp(struct device *dev)
+{
+	return dev_get_drvdata(dev->parent);
+}
+
+static inline int dev_to_port(struct device *dev)
+{
+	return to_platform_device(dev)->id;
+}
+
+/* Register Access Helpers, rmw() functions need to run locked */
+static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
+{
+	return __raw_readl(ssp->regs + reg);
+}
+
+static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
+{
+	__raw_writel(val, ssp->regs + reg);
+}
+
+static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
+{
+	ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
+}
+
+static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
+{
+	return ssp_read(ssp, ssp_port_base[port] + reg);
+}
+
+static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
+				  u32 val)
+{
+	ssp_write(ssp, ssp_port_base[port] + reg, val);
+}
+
+static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
+				u32 mask, u32 bits)
+{
+	ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
+}
+
+static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
+				     u32 bits)
+{
+	ssp_port_rmw(ssp, port, reg, bits, 0);
+}
+
+static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
+				     u32 bits)
+{
+	ssp_port_rmw(ssp, port, reg, 0, bits);
+}
+
+/* Called to setup port clock mode, caller must hold ssp->lock */
+static int __set_mode(struct ti_ssp *ssp, int port, int mode)
+{
+	mode &= SSP_PORT_CONFIG_MASK;
+	ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
+
+	return 0;
+}
+
+int ti_ssp_set_mode(struct device *dev, int mode)
+{
+	struct ti_ssp *ssp = dev_to_ssp(dev);
+	int port = dev_to_port(dev);
+	int ret;
+
+	spin_lock(&ssp->lock);
+	ret = __set_mode(ssp, port, mode);
+	spin_unlock(&ssp->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(ti_ssp_set_mode);
+
+/* Called to setup iosel2, caller must hold ssp->lock */
+static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
+{
+	ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
+	ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
+}
+
+/* Called to setup port iosel, caller must hold ssp->lock */
+static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
+{
+	unsigned val, shift = port ? 16 : 0;
+
+	/* IOSEL1 gets the least significant 16 bits */
+	val = ssp_read(ssp, REG_IOSEL_1);
+	val &= 0xffff << (port ? 0 : 16);
+	val |= (iosel & 0xffff) << (port ? 16 : 0);
+	ssp_write(ssp, REG_IOSEL_1, val);
+
+	/* IOSEL2 gets the most significant 16 bits */
+	val = (iosel >> 16) & 0x7;
+	__set_iosel2(ssp, 0x7 << shift, val << shift);
+}
+
+int ti_ssp_set_iosel(struct device *dev, u32 iosel)
+{
+	struct ti_ssp *ssp = dev_to_ssp(dev);
+	int port = dev_to_port(dev);
+
+	spin_lock(&ssp->lock);
+	__set_iosel(ssp, port, iosel);
+	spin_unlock(&ssp->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(ti_ssp_set_iosel);
+
+int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
+{
+	struct ti_ssp *ssp = dev_to_ssp(dev);
+	int port = dev_to_port(dev);
+	int i;
+
+	if (len > SSP_PORT_SEQRAM_SIZE)
+		return -ENOSPC;
+
+	spin_lock(&ssp->lock);
+
+	/* Enable SeqRAM access */
+	ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
+
+	/* Copy code */
+	for (i = 0; i < len; i++) {
+		__raw_writel(prog[i], ssp->regs + offs + 4*i +
+			     ssp_port_seqram[port]);
+	}
+
+	/* Disable SeqRAM access */
+	ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
+
+	spin_unlock(&ssp->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(ti_ssp_load);
+
+int ti_ssp_raw_read(struct device *dev)
+{
+	struct ti_ssp *ssp = dev_to_ssp(dev);
+	int port = dev_to_port(dev);
+	int shift = port ? 27 : 11;
+
+	return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
+}
+EXPORT_SYMBOL(ti_ssp_raw_read);
+
+int ti_ssp_raw_write(struct device *dev, u32 val)
+{
+	struct ti_ssp *ssp = dev_to_ssp(dev);
+	int port = dev_to_port(dev), shift;
+
+	spin_lock(&ssp->lock);
+
+	shift = port ? 22 : 6;
+	val &= 0xf;
+	__set_iosel2(ssp, 0xf << shift, val << shift);
+
+	spin_unlock(&ssp->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(ti_ssp_raw_write);
+
+static inline int __xfer_done(struct ti_ssp *ssp, int port)
+{
+	return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
+}
+
+int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
+{
+	struct ti_ssp *ssp = dev_to_ssp(dev);
+	int port = dev_to_port(dev);
+	int ret;
+
+	if (pc & ~(0x3f))
+		return -EINVAL;
+
+	/* Grab ssp->lock to serialize rmw on ssp registers */
+	spin_lock(&ssp->lock);
+
+	ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
+	ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
+	ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
+
+	/* grab wait queue head lock to avoid race with the isr */
+	spin_lock_irq(&ssp->wqh.lock);
+
+	/* kick off sequence execution in hardware */
+	ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
+
+	/* drop ssp lock; no register writes beyond this */
+	spin_unlock(&ssp->lock);
+
+	ret = wait_event_interruptible_locked_irq(ssp->wqh,
+						  __xfer_done(ssp, port));
+	spin_unlock_irq(&ssp->wqh.lock);
+
+	if (ret < 0)
+		return ret;
+
+	if (output) {
+		*output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
+			  (ssp_port_read(ssp, port, PORT_DATA) &  0xffff);
+	}
+
+	ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
+
+	return ret;
+}
+EXPORT_SYMBOL(ti_ssp_run);
+
+static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
+{
+	struct ti_ssp *ssp = dev_data;
+
+	spin_lock(&ssp->wqh.lock);
+
+	ssp_write(ssp, REG_INTR_ST, 0x3);
+	wake_up_locked(&ssp->wqh);
+
+	spin_unlock(&ssp->wqh.lock);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit ti_ssp_probe(struct platform_device *pdev)
+{
+	static struct ti_ssp *ssp;
+	const struct ti_ssp_data *pdata = pdev->dev.platform_data;
+	int error = 0, prediv = 0xff, id;
+	unsigned long sysclk;
+	struct device *dev = &pdev->dev;
+	struct mfd_cell cells[2];
+
+	ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
+	if (!ssp) {
+		dev_err(dev, "cannot allocate device info\n");
+		return -ENOMEM;
+	}
+
+	ssp->dev = dev;
+	dev_set_drvdata(dev, ssp);
+
+	ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ssp->res) {
+		error = -ENODEV;
+		dev_err(dev, "cannot determine register area\n");
+		goto error_res;
+	}
+
+	if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
+				pdev->name)) {
+		error = -ENOMEM;
+		dev_err(dev, "cannot claim register memory\n");
+		goto error_res;
+	}
+
+	ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
+	if (!ssp->regs) {
+		error = -ENOMEM;
+		dev_err(dev, "cannot map register memory\n");
+		goto error_map;
+	}
+
+	ssp->clk = clk_get(dev, NULL);
+	if (IS_ERR(ssp->clk)) {
+		error = PTR_ERR(ssp->clk);
+		dev_err(dev, "cannot claim device clock\n");
+		goto error_clk;
+	}
+
+	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0) {
+		error = -ENODEV;
+		dev_err(dev, "unknown irq\n");
+		goto error_irq;
+	}
+
+	error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
+				     dev_name(dev), ssp);
+	if (error < 0) {
+		dev_err(dev, "cannot acquire irq\n");
+		goto error_irq;
+	}
+
+	spin_lock_init(&ssp->lock);
+	init_waitqueue_head(&ssp->wqh);
+
+	/* Power on and initialize SSP */
+	error = clk_enable(ssp->clk);
+	if (error) {
+		dev_err(dev, "cannot enable device clock\n");
+		goto error_enable;
+	}
+
+	/* Reset registers to a sensible known state */
+	ssp_write(ssp, REG_IOSEL_1, 0);
+	ssp_write(ssp, REG_IOSEL_2, 0);
+	ssp_write(ssp, REG_INTR_EN, 0x3);
+	ssp_write(ssp, REG_INTR_ST, 0x3);
+	ssp_write(ssp, REG_TEST_CTRL, 0);
+	ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
+	ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
+	ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
+	ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
+
+	sysclk = clk_get_rate(ssp->clk);
+	if (pdata && pdata->out_clock)
+		prediv = (sysclk / pdata->out_clock) - 1;
+	prediv = clamp(prediv, 0, 0xff);
+	ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
+
+	memset(cells, 0, sizeof(cells));
+	for (id = 0; id < 2; id++) {
+		const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
+
+		cells[id].id		= id;
+		cells[id].name		= data->dev_name;
+		cells[id].platform_data	= data->pdata;
+		cells[id].data_size	= data->pdata_size;
+	}
+
+	error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
+	if (error < 0) {
+		dev_err(dev, "cannot add mfd cells\n");
+		goto error_enable;
+	}
+
+	return 0;
+
+error_enable:
+	free_irq(ssp->irq, ssp);
+error_irq:
+	clk_put(ssp->clk);
+error_clk:
+	iounmap(ssp->regs);
+error_map:
+	release_mem_region(ssp->res->start, resource_size(ssp->res));
+error_res:
+	kfree(ssp);
+	return error;
+}
+
+static int __devexit ti_ssp_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ti_ssp *ssp = dev_get_drvdata(dev);
+
+	mfd_remove_devices(dev);
+	clk_disable(ssp->clk);
+	free_irq(ssp->irq, ssp);
+	clk_put(ssp->clk);
+	iounmap(ssp->regs);
+	release_mem_region(ssp->res->start, resource_size(ssp->res));
+	kfree(ssp);
+	dev_set_drvdata(dev, NULL);
+	return 0;
+}
+
+static struct platform_driver ti_ssp_driver = {
+	.probe		= ti_ssp_probe,
+	.remove		= __devexit_p(ti_ssp_remove),
+	.driver		= {
+		.name	= "ti-ssp",
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init ti_ssp_init(void)
+{
+	return platform_driver_register(&ti_ssp_driver);
+}
+module_init(ti_ssp_init);
+
+static void __exit ti_ssp_exit(void)
+{
+	platform_driver_unregister(&ti_ssp_driver);
+}
+module_exit(ti_ssp_exit);
+
+MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
+MODULE_AUTHOR("Cyril Chemparathy");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ti-ssp");