mfd: rtsx: Read vendor setting from config space

Normally OEMs will set vendor setting to the config space of Realtek
card reader in BIOS stage. This patch reads the setting at the first,
and configure the internal registers according to it, to improve card
reader's compatibility condition.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 71 insertions, 20 deletions

diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index fc831dcb1480..c3181d71fedd 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -29,6 +29,60 @@
 
 #include "rtsx_pcr.h"
 
+static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
+{
+	u8 driving_3v3[4][3] = {
+		{0x13, 0x13, 0x13},
+		{0x96, 0x96, 0x96},
+		{0x7F, 0x7F, 0x7F},
+		{0x96, 0x96, 0x96},
+	};
+	u8 driving_1v8[4][3] = {
+		{0x99, 0x99, 0x99},
+		{0xAA, 0xAA, 0xAA},
+		{0xFE, 0xFE, 0xFE},
+		{0xB3, 0xB3, 0xB3},
+	};
+	u8 (*driving)[3], drive_sel;
+
+	if (voltage == OUTPUT_3V3) {
+		driving = driving_3v3;
+		drive_sel = pcr->sd30_drive_sel_3v3;
+	} else {
+		driving = driving_1v8;
+		drive_sel = pcr->sd30_drive_sel_1v8;
+	}
+
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
+			0xFF, driving[drive_sel][0]);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
+			0xFF, driving[drive_sel][1]);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
+			0xFF, driving[drive_sel][2]);
+}
+
+static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
+{
+	u32 reg;
+
+	rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+	dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+
+	if (!rtsx_vendor_setting_valid(reg))
+		return;
+
+	pcr->aspm_en = rtsx_reg_to_aspm(reg);
+	pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
+	pcr->card_drive_sel &= 0x3F;
+	pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
+
+	rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+	dev_dbg(&(pcr->pci->dev), "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+	pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
+	if (rtsx_reg_check_reverse_socket(reg))
+		pcr->flags |= PCR_REVERSE_SOCKET;
+}
+
 static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
 {
 	u16 cap;
@@ -48,17 +102,15 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LTR_CTL, 0xFF, 0xA3);
 	/* Configure OBFF */
 	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OBFF_CFG, 0x03, 0x03);
-	/* Configure force_clock_req
-	 * Maybe We should define 0xFF03 as some name
-	 */
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, 0xFF03, 0x08, 0x08);
-	/* Correct driving */
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-			SD30_CLK_DRIVE_SEL, 0xFF, 0x96);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-			SD30_CMD_DRIVE_SEL, 0xFF, 0x96);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
-			SD30_DAT_DRIVE_SEL, 0xFF, 0x96);
+	/* Configure driving */
+	rts5227_fill_driving(pcr, OUTPUT_3V3);
+	/* Configure force_clock_req */
+	if (pcr->flags & PCR_REVERSE_SOCKET)
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+				AUTOLOAD_CFG_BASE + 3, 0xB8, 0xB8);
+	else
+		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+				AUTOLOAD_CFG_BASE + 3, 0xB8, 0x88);
 
 	return rtsx_pci_send_cmd(pcr, 100);
 }
@@ -131,13 +183,11 @@ static int rts5227_card_power_off(struct rtsx_pcr *pcr, int card)
 static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 {
 	int err;
-	u8 drive_sel;
 
 	if (voltage == OUTPUT_3V3) {
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
 		if (err < 0)
 			return err;
-		drive_sel = 0x96;
 	} else if (voltage == OUTPUT_1V8) {
 		err = rtsx_pci_write_phy_register(pcr, 0x11, 0x3C02);
 		if (err < 0)
@@ -145,23 +195,18 @@ static int rts5227_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
 		err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C80 | 0x24);
 		if (err < 0)
 			return err;
-		drive_sel = 0xB3;
 	} else {
 		return -EINVAL;
 	}
 
 	/* set pad drive */
 	rtsx_pci_init_cmd(pcr);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
-			0xFF, drive_sel);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
-			0xFF, drive_sel);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
-			0xFF, drive_sel);
+	rts5227_fill_driving(pcr, voltage);
 	return rtsx_pci_send_cmd(pcr, 100);
 }
 
 static const struct pcr_ops rts5227_pcr_ops = {
+	.fetch_vendor_settings = rts5227_fetch_vendor_settings,
 	.extra_init_hw = rts5227_extra_init_hw,
 	.optimize_phy = rts5227_optimize_phy,
 	.turn_on_led = rts5227_turn_on_led,
@@ -227,6 +272,12 @@ void rts5227_init_params(struct rtsx_pcr *pcr)
 	pcr->num_slots = 2;
 	pcr->ops = &rts5227_pcr_ops;
 
+	pcr->flags = 0;
+	pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
+	pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
+	pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
+	pcr->aspm_en = ASPM_L1_EN;
+
 	pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
 	pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
 	pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;