summaryrefslogtreecommitdiffstats
path: root/drivers/message
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-06-21 11:18:25 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-06-21 11:18:25 -0700
commit28e4b224955cbe30275b2a7842e729023a4f4b03 (patch)
treeab4d28fecc06070fc2a2742f4b4550b29de44912 /drivers/message
parent22ae813b85df7c0b0fc7c8d6f336d6a9f566ff97 (diff)
parent67d59dfdeb21df2c16dcd478b66177e91178ecd0 (diff)
downloadblackbird-op-linux-28e4b224955cbe30275b2a7842e729023a4f4b03.tar.gz
blackbird-op-linux-28e4b224955cbe30275b2a7842e729023a4f4b03.zip
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
Diffstat (limited to 'drivers/message')
-rw-r--r--drivers/message/fusion/mptbase.c209
-rw-r--r--drivers/message/fusion/mptbase.h16
-rw-r--r--drivers/message/fusion/mptfc.c394
-rw-r--r--drivers/message/fusion/mptscsih.c23
-rw-r--r--drivers/message/i2o/i2o_scsi.c4
5 files changed, 449 insertions, 197 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 59690cbabfca..12dd8d493ee2 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1185,7 +1185,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
ioc->pcidev = pdev;
ioc->diagPending = 0;
spin_lock_init(&ioc->diagLock);
- spin_lock_init(&ioc->fc_rescan_work_lock);
spin_lock_init(&ioc->initializing_hba_lock);
/* Initialize the event logging.
@@ -1383,30 +1382,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
/* Set lookup ptr. */
list_add_tail(&ioc->list, &ioc_list);
- ioc->pci_irq = -1;
- if (pdev->irq) {
- if (mpt_msi_enable && !pci_enable_msi(pdev))
- printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n", ioc->name);
-
- r = request_irq(pdev->irq, mpt_interrupt, SA_SHIRQ, ioc->name, ioc);
-
- if (r < 0) {
- printk(MYIOC_s_ERR_FMT "Unable to allocate interrupt %d!\n",
- ioc->name, pdev->irq);
- list_del(&ioc->list);
- iounmap(mem);
- kfree(ioc);
- return -EBUSY;
- }
-
- ioc->pci_irq = pdev->irq;
-
- pci_set_master(pdev); /* ?? */
- pci_set_drvdata(pdev, ioc);
-
- dprintk((KERN_INFO MYNAM ": %s installed at interrupt %d\n", ioc->name, pdev->irq));
- }
-
/* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
*/
mpt_detect_bound_ports(ioc, pdev);
@@ -1416,11 +1391,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
printk(KERN_WARNING MYNAM
": WARNING - %s did not initialize properly! (%d)\n",
ioc->name, r);
-
list_del(&ioc->list);
- free_irq(ioc->pci_irq, ioc);
- if (mpt_msi_enable)
- pci_disable_msi(pdev);
if (ioc->alt_ioc)
ioc->alt_ioc->alt_ioc = NULL;
iounmap(mem);
@@ -1639,6 +1610,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
int handlers;
int ret = 0;
int reset_alt_ioc_active = 0;
+ int irq_allocated = 0;
printk(KERN_INFO MYNAM ": Initiating %s %s\n",
ioc->name, reason==MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
@@ -1722,6 +1694,36 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
}
}
+ /*
+ * Device is reset now. It must have de-asserted the interrupt line
+ * (if it was asserted) and it should be safe to register for the
+ * interrupt now.
+ */
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
+ ioc->pci_irq = -1;
+ if (ioc->pcidev->irq) {
+ if (mpt_msi_enable && !pci_enable_msi(ioc->pcidev))
+ printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
+ ioc->name);
+ rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
+ SA_SHIRQ, ioc->name, ioc);
+ if (rc < 0) {
+ printk(MYIOC_s_ERR_FMT "Unable to allocate "
+ "interrupt %d!\n", ioc->name,
+ ioc->pcidev->irq);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ return -EBUSY;
+ }
+ irq_allocated = 1;
+ ioc->pci_irq = ioc->pcidev->irq;
+ pci_set_master(ioc->pcidev); /* ?? */
+ pci_set_drvdata(ioc->pcidev, ioc);
+ dprintk((KERN_INFO MYNAM ": %s installed at interrupt "
+ "%d\n", ioc->name, ioc->pcidev->irq));
+ }
+ }
+
/* Prime reply & request queues!
* (mucho alloc's) Must be done prior to
* init as upper addresses are needed for init.
@@ -1821,7 +1823,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
ret = mptbase_sas_persist_operation(ioc,
MPI_SAS_OP_CLEAR_NOT_PRESENT);
if(ret != 0)
- return -1;
+ goto out;
}
/* Find IM volumes
@@ -1829,14 +1831,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
mpt_findImVolumes(ioc);
} else if (ioc->bus_type == FC) {
- /*
- * Pre-fetch FC port WWN and stuff...
- * (FCPortPage0_t stuff)
- */
- for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) mptbase_GetFcPortPage0(ioc, ii);
- }
-
if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
(ioc->lan_cnfg_page0.Header.PageLength == 0)) {
/*
@@ -1902,6 +1896,12 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
/* FIXME? Examine results here? */
}
+out:
+ if ((ret != 0) && irq_allocated) {
+ free_irq(ioc->pci_irq, ioc);
+ if (mpt_msi_enable)
+ pci_disable_msi(ioc->pcidev);
+ }
return ret;
}
@@ -2276,7 +2276,7 @@ MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1); /* 1 msec delay */
}
@@ -2664,7 +2664,7 @@ SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
state = mpt_GetIocState(ioc, 1);
while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay(1);
}
@@ -2916,7 +2916,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
/* wait 1 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1);
}
@@ -2933,7 +2933,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
}
/* wait .1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
@@ -3023,7 +3023,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
/* wait 1 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1);
+ msleep (1);
} else {
mdelay (1);
}
@@ -3071,7 +3071,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
return 0;
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (10);
+ msleep (10);
} else {
mdelay (10);
}
@@ -3122,7 +3122,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
@@ -3144,7 +3144,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
return hard_reset_done;
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (10);
+ msleep (10);
} else {
mdelay (10);
}
@@ -3215,7 +3215,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
/* wait 100 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
@@ -3294,7 +3294,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
@@ -3322,7 +3322,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
@@ -3356,7 +3356,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
/* wait 100 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
@@ -3450,7 +3450,7 @@ SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1); /* 1 msec delay */
}
@@ -3890,7 +3890,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
break;
- msleep_interruptible (1);
+ msleep (1);
count++;
}
} else {
@@ -3939,7 +3939,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
break;
- msleep_interruptible(1);
+ msleep(1);
count++;
}
} else {
@@ -4162,108 +4162,6 @@ GetLanConfigPages(MPT_ADAPTER *ioc)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
- * mptbase_GetFcPortPage0 - Fetch FCPort config Page0.
- * @ioc: Pointer to MPT_ADAPTER structure
- * @portnum: IOC Port number
- *
- * Return: 0 for success
- * -ENOMEM if no memory available
- * -EPERM if not allowed due to ISR context
- * -EAGAIN if no msg frames currently available
- * -EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
-{
- ConfigPageHeader_t hdr;
- CONFIGPARMS cfg;
- FCPortPage0_t *ppage0_alloc;
- FCPortPage0_t *pp0dest;
- dma_addr_t page0_dma;
- int data_sz;
- int copy_sz;
- int rc;
- int count = 400;
-
-
- /* Get FCPort Page 0 header */
- hdr.PageVersion = 0;
- hdr.PageLength = 0;
- hdr.PageNumber = 0;
- hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
- cfg.cfghdr.hdr = &hdr;
- cfg.physAddr = -1;
- cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
- cfg.dir = 0;
- cfg.pageAddr = portnum;
- cfg.timeout = 0;
-
- if ((rc = mpt_config(ioc, &cfg)) != 0)
- return rc;
-
- if (hdr.PageLength == 0)
- return 0;
-
- data_sz = hdr.PageLength * 4;
- rc = -ENOMEM;
- ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
- if (ppage0_alloc) {
-
- try_again:
- memset((u8 *)ppage0_alloc, 0, data_sz);
- cfg.physAddr = page0_dma;
- cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-
- if ((rc = mpt_config(ioc, &cfg)) == 0) {
- /* save the data */
- pp0dest = &ioc->fc_port_page0[portnum];
- copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
- memcpy(pp0dest, ppage0_alloc, copy_sz);
-
- /*
- * Normalize endianness of structure data,
- * by byte-swapping all > 1 byte fields!
- */
- pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
- pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
- pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
- pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
- pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
- pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
- pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
- pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
- pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
- pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
- pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
- pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
- pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
- pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
- pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
- pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
-
- /*
- * if still doing discovery,
- * hang loose a while until finished
- */
- if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
- if (count-- > 0) {
- msleep_interruptible(100);
- goto try_again;
- }
- printk(MYIOC_s_INFO_FMT "Firmware discovery not"
- " complete.\n",
- ioc->name);
- }
- }
-
- pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
- }
-
- return rc;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
* mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
* @ioc: Pointer to MPT_ADAPTER structure
* @sas_address: 64bit SAS Address for operation.
@@ -6467,7 +6365,6 @@ EXPORT_SYMBOL(mpt_findImVolumes);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mptbase_GetFcPortPage0);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index f673cca507e1..4720f9ae86aa 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.03.09"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.09"
+#define MPT_LINUX_VERSION_COMMON "3.03.10"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.10"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -487,6 +487,15 @@ typedef struct _RaidCfgData {
int isRaid; /* bit field, 1 if RAID */
}RaidCfgData;
+typedef struct _FcCfgData {
+ /* will ultimately hold fc_port_page0 also */
+ struct {
+ FCPortPage1_t *data;
+ dma_addr_t dma;
+ int pg_sz;
+ } fc_port_page1[2];
+} FcCfgData;
+
#define MPT_RPORT_INFO_FLAGS_REGISTERED 0x01 /* rport registered */
#define MPT_RPORT_INFO_FLAGS_MISSING 0x02 /* missing from DevPage0 scan */
@@ -565,6 +574,7 @@ typedef struct _MPT_ADAPTER
SpiCfgData spi_data; /* Scsi config. data */
RaidCfgData raid_data; /* Raid config. data */
SasCfgData sas_data; /* Sas config. data */
+ FcCfgData fc_data; /* Fc config. data */
MPT_IOCTL *ioctl; /* ioctl data pointer */
struct proc_dir_entry *ioc_dentry;
struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */
@@ -625,6 +635,7 @@ typedef struct _MPT_ADAPTER
int num_ports;
struct work_struct mptscsih_persistTask;
+ struct work_struct fc_setup_reset_work;
struct list_head fc_rports;
spinlock_t fc_rescan_work_lock;
int fc_rescan_work_count;
@@ -1027,7 +1038,6 @@ extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
-extern int mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
/*
* Public data decl's...
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 856487741ef4..74714e5bcf03 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -169,13 +169,6 @@ static struct fc_function_template mptfc_transport_functions = {
};
-/* FIXME! values controlling firmware RESCAN event
- * need to be set low to allow dev_loss_tmo to
- * work as expected. Currently, firmware doesn't
- * notify driver of RESCAN event until some number
- * of seconds elapse. This value can be set via
- * lsiutil.
- */
static void
mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
@@ -587,15 +580,266 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
#ifdef DMPT_DEBUG_FC
if (unlikely(err)) {
dfcprintk ((MYIOC_s_INFO_FMT
- "mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero.\n",
+ "mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero, (%x).\n",
((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
- SCpnt->device->id,SCpnt->device->lun));
+ SCpnt->device->id,SCpnt->device->lun,err));
}
#endif
return err;
}
+/*
+ * mptfc_GetFcPortPage0 - Fetch FCPort config Page0.
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @portnum: IOC Port number
+ *
+ * Return: 0 for success
+ * -ENOMEM if no memory available
+ * -EPERM if not allowed due to ISR context
+ * -EAGAIN if no msg frames currently available
+ * -EFAULT for non-successful reply or no reply (timeout)
+ * -EINVAL portnum arg out of range (hardwired to two elements)
+ */
+static int
+mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ FCPortPage0_t *ppage0_alloc;
+ FCPortPage0_t *pp0dest;
+ dma_addr_t page0_dma;
+ int data_sz;
+ int copy_sz;
+ int rc;
+ int count = 400;
+
+ if (portnum > 1)
+ return -EINVAL;
+
+ /* Get FCPort Page 0 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return 0;
+
+ data_sz = hdr.PageLength * 4;
+ rc = -ENOMEM;
+ ppage0_alloc = (FCPortPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
+ if (ppage0_alloc) {
+
+ try_again:
+ memset((u8 *)ppage0_alloc, 0, data_sz);
+ cfg.physAddr = page0_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ /* save the data */
+ pp0dest = &ioc->fc_port_page0[portnum];
+ copy_sz = min_t(int, sizeof(FCPortPage0_t), data_sz);
+ memcpy(pp0dest, ppage0_alloc, copy_sz);
+
+ /*
+ * Normalize endianness of structure data,
+ * by byte-swapping all > 1 byte fields!
+ */
+ pp0dest->Flags = le32_to_cpu(pp0dest->Flags);
+ pp0dest->PortIdentifier = le32_to_cpu(pp0dest->PortIdentifier);
+ pp0dest->WWNN.Low = le32_to_cpu(pp0dest->WWNN.Low);
+ pp0dest->WWNN.High = le32_to_cpu(pp0dest->WWNN.High);
+ pp0dest->WWPN.Low = le32_to_cpu(pp0dest->WWPN.Low);
+ pp0dest->WWPN.High = le32_to_cpu(pp0dest->WWPN.High);
+ pp0dest->SupportedServiceClass = le32_to_cpu(pp0dest->SupportedServiceClass);
+ pp0dest->SupportedSpeeds = le32_to_cpu(pp0dest->SupportedSpeeds);
+ pp0dest->CurrentSpeed = le32_to_cpu(pp0dest->CurrentSpeed);
+ pp0dest->MaxFrameSize = le32_to_cpu(pp0dest->MaxFrameSize);
+ pp0dest->FabricWWNN.Low = le32_to_cpu(pp0dest->FabricWWNN.Low);
+ pp0dest->FabricWWNN.High = le32_to_cpu(pp0dest->FabricWWNN.High);
+ pp0dest->FabricWWPN.Low = le32_to_cpu(pp0dest->FabricWWPN.Low);
+ pp0dest->FabricWWPN.High = le32_to_cpu(pp0dest->FabricWWPN.High);
+ pp0dest->DiscoveredPortsCount = le32_to_cpu(pp0dest->DiscoveredPortsCount);
+ pp0dest->MaxInitiators = le32_to_cpu(pp0dest->MaxInitiators);
+
+ /*
+ * if still doing discovery,
+ * hang loose a while until finished
+ */
+ if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
+ if (count-- > 0) {
+ msleep(100);
+ goto try_again;
+ }
+ printk(MYIOC_s_INFO_FMT "Firmware discovery not"
+ " complete.\n",
+ ioc->name);
+ }
+ }
+
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
+ }
+
+ return rc;
+}
+
+static int
+mptfc_WriteFcPortPage1(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ int rc;
+
+ if (portnum > 1)
+ return -EINVAL;
+
+ if (!(ioc->fc_data.fc_port_page1[portnum].data))
+ return -EINVAL;
+
+ /* get fcport page 1 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return -ENODEV;
+
+ if (hdr.PageLength*4 != ioc->fc_data.fc_port_page1[portnum].pg_sz)
+ return -EINVAL;
+
+ cfg.physAddr = ioc->fc_data.fc_port_page1[portnum].dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ cfg.dir = 1;
+
+ rc = mpt_config(ioc, &cfg);
+
+ return rc;
+}
+
+static int
+mptfc_GetFcPortPage1(MPT_ADAPTER *ioc, int portnum)
+{
+ ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ FCPortPage1_t *page1_alloc;
+ dma_addr_t page1_dma;
+ int data_sz;
+ int rc;
+
+ if (portnum > 1)
+ return -EINVAL;
+
+ /* get fcport page 1 header */
+ hdr.PageVersion = 0;
+ hdr.PageLength = 0;
+ hdr.PageNumber = 1;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0;
+ cfg.pageAddr = portnum;
+ cfg.timeout = 0;
+
+ if ((rc = mpt_config(ioc, &cfg)) != 0)
+ return rc;
+
+ if (hdr.PageLength == 0)
+ return -ENODEV;
+
+start_over:
+
+ if (ioc->fc_data.fc_port_page1[portnum].data == NULL) {
+ data_sz = hdr.PageLength * 4;
+ if (data_sz < sizeof(FCPortPage1_t))
+ data_sz = sizeof(FCPortPage1_t);
+
+ page1_alloc = (FCPortPage1_t *) pci_alloc_consistent(ioc->pcidev,
+ data_sz,
+ &page1_dma);
+ if (!page1_alloc)
+ return -ENOMEM;
+ }
+ else {
+ page1_alloc = ioc->fc_data.fc_port_page1[portnum].data;
+ page1_dma = ioc->fc_data.fc_port_page1[portnum].dma;
+ data_sz = ioc->fc_data.fc_port_page1[portnum].pg_sz;
+ if (hdr.PageLength * 4 > data_sz) {
+ ioc->fc_data.fc_port_page1[portnum].data = NULL;
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *)
+ page1_alloc, page1_dma);
+ goto start_over;
+ }
+ }
+
+ memset(page1_alloc,0,data_sz);
+
+ cfg.physAddr = page1_dma;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((rc = mpt_config(ioc, &cfg)) == 0) {
+ ioc->fc_data.fc_port_page1[portnum].data = page1_alloc;
+ ioc->fc_data.fc_port_page1[portnum].pg_sz = data_sz;
+ ioc->fc_data.fc_port_page1[portnum].dma = page1_dma;
+ }
+ else {
+ ioc->fc_data.fc_port_page1[portnum].data = NULL;
+ pci_free_consistent(ioc->pcidev, data_sz, (u8 *)
+ page1_alloc, page1_dma);
+ }
+
+ return rc;
+}
+
+static void
+mptfc_SetFcPortPage1_defaults(MPT_ADAPTER *ioc)
+{
+ int ii;
+ FCPortPage1_t *pp1;
+
+ #define MPTFC_FW_DEVICE_TIMEOUT (1)
+ #define MPTFC_FW_IO_PEND_TIMEOUT (1)
+ #define ON_FLAGS (MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY)
+ #define OFF_FLAGS (MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS)
+
+ for (ii=0; ii<ioc->facts.NumberOfPorts; ii++) {
+ if (mptfc_GetFcPortPage1(ioc, ii) != 0)
+ continue;
+ pp1 = ioc->fc_data.fc_port_page1[ii].data;
+ if ((pp1->InitiatorDeviceTimeout == MPTFC_FW_DEVICE_TIMEOUT)
+ && (pp1->InitiatorIoPendTimeout == MPTFC_FW_IO_PEND_TIMEOUT)
+ && ((pp1->Flags & ON_FLAGS) == ON_FLAGS)
+ && ((pp1->Flags & OFF_FLAGS) == 0))
+ continue;
+ pp1->InitiatorDeviceTimeout = MPTFC_FW_DEVICE_TIMEOUT;
+ pp1->InitiatorIoPendTimeout = MPTFC_FW_IO_PEND_TIMEOUT;
+ pp1->Flags &= ~OFF_FLAGS;
+ pp1->Flags |= ON_FLAGS;
+ mptfc_WriteFcPortPage1(ioc, ii);
+ }
+}
+
+
static void
mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum)
{
@@ -629,6 +873,31 @@ mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum)
}
static void
+mptfc_setup_reset(void *arg)
+{
+ MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+ u64 pn;
+ struct mptfc_rport_info *ri;
+
+ /* reset about to happen, delete (block) all rports */
+ list_for_each_entry(ri, &ioc->fc_rports, list) {
+ if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) {
+ ri->flags &= ~MPT_RPORT_INFO_FLAGS_REGISTERED;
+ fc_remote_port_delete(ri->rport); /* won't sleep */
+ ri->rport = NULL;
+
+ pn = (u64)ri->pg0.WWPN.High << 32 |
+ (u64)ri->pg0.WWPN.Low;
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_setup_reset.%d: %llx deleted\n",
+ ioc->name,
+ ioc->sh->host_no,
+ (unsigned long long)pn));
+ }
+ }
+}
+
+static void
mptfc_rescan_devices(void *arg)
{
MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
@@ -651,7 +920,7 @@ mptfc_rescan_devices(void *arg)
* will reregister existing rports
*/
for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) mptbase_GetFcPortPage0(ioc, ii);
+ (void) mptfc_GetFcPortPage0(ioc, ii);
mptfc_init_host_attr(ioc,ii); /* refresh */
mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev);
}
@@ -753,7 +1022,9 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_mptfc_probe;
}
+ spin_lock_init(&ioc->fc_rescan_work_lock);
INIT_WORK(&ioc->fc_rescan_work, mptfc_rescan_devices,(void *)ioc);
+ INIT_WORK(&ioc->fc_setup_reset_work, mptfc_setup_reset, (void *)ioc);
spin_lock_irqsave(&ioc->FreeQlock, flags);
@@ -889,6 +1160,15 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_mptfc_probe;
/*
+ * Pre-fetch FC port WWN and stuff...
+ * (FCPortPage0_t stuff)
+ */
+ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
+ (void) mptfc_GetFcPortPage0(ioc, ii);
+ }
+ mptfc_SetFcPortPage1_defaults(ioc);
+
+ /*
* scan for rports -
* by doing it via the workqueue, some locking is eliminated
*/
@@ -917,6 +1197,81 @@ static struct pci_driver mptfc_driver = {
#endif
};
+static int
+mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
+{
+ MPT_SCSI_HOST *hd;
+ u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
+ unsigned long flags;
+ int rc=1;
+
+ devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
+ ioc->name, event));
+
+ if (ioc->sh == NULL ||
+ ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
+ return 1;
+
+ switch (event) {
+ case MPI_EVENT_RESCAN:
+ spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+ if (ioc->fc_rescan_work_q) {
+ if (ioc->fc_rescan_work_count++ == 0) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+ break;
+ default:
+ rc = mptscsih_event_process(ioc,pEvReply);
+ break;
+ }
+ return rc;
+}
+
+static int
+mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ int rc;
+ unsigned long flags;
+
+ rc = mptscsih_ioc_reset(ioc,reset_phase);
+ if (rc == 0)
+ return rc;
+
+
+ dtmprintk((KERN_WARNING MYNAM
+ ": IOC %s_reset routed to FC host driver!\n",
+ reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
+ reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
+
+ if (reset_phase == MPT_IOC_SETUP_RESET) {
+ spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+ if (ioc->fc_rescan_work_q) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_setup_reset_work);
+ }
+ spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+ }
+
+ else if (reset_phase == MPT_IOC_PRE_RESET) {
+ }
+
+ else { /* MPT_IOC_POST_RESET */
+ mptfc_SetFcPortPage1_defaults(ioc);
+ spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+ if (ioc->fc_rescan_work_q) {
+ if (ioc->fc_rescan_work_count++ == 0) {
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+ }
+ return 1;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptfc_init - Register MPT adapter(s) as SCSI host(s) with
@@ -931,8 +1286,8 @@ mptfc_init(void)
show_mptmod_ver(my_NAME, my_VERSION);
- /* sanity check module parameter */
- if (mptfc_dev_loss_tmo == 0)
+ /* sanity check module parameters */
+ if (mptfc_dev_loss_tmo <= 0)
mptfc_dev_loss_tmo = MPTFC_DEV_LOSS_TMO;
mptfc_transport_template =
@@ -945,12 +1300,12 @@ mptfc_init(void)
mptfcTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTFC_DRIVER);
mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER);
- if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) {
+ if (mpt_event_register(mptfcDoneCtx, mptfc_event_process) == 0) {
devtverboseprintk((KERN_INFO MYNAM
": Registered for IOC event notifications\n"));
}
- if (mpt_reset_register(mptfcDoneCtx, mptscsih_ioc_reset) == 0) {
+ if (mpt_reset_register(mptfcDoneCtx, mptfc_ioc_reset) == 0) {
dprintk((KERN_INFO MYNAM
": Registered for IOC reset notifications\n"));
}
@@ -975,6 +1330,7 @@ mptfc_remove(struct pci_dev *pdev)
struct mptfc_rport_info *p, *n;
struct workqueue_struct *work_q;
unsigned long flags;
+ int ii;
/* destroy workqueue */
if ((work_q=ioc->fc_rescan_work_q)) {
@@ -991,6 +1347,16 @@ mptfc_remove(struct pci_dev *pdev)
kfree(p);
}
+ for (ii=0; ii<ioc->facts.NumberOfPorts; ii++) {
+ if (ioc->fc_data.fc_port_page1[ii].data) {
+ pci_free_consistent(ioc->pcidev,
+ ioc->fc_data.fc_port_page1[ii].pg_sz,
+ (u8 *) ioc->fc_data.fc_port_page1[ii].data,
+ ioc->fc_data.fc_port_page1[ii].dma);
+ ioc->fc_data.fc_port_page1[ii].data = NULL;
+ }
+ }
+
mptscsih_remove(pdev);
}
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 84fa271eb8f4..8242b16e3168 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1922,7 +1922,7 @@ mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
break;
}
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- msleep_interruptible(250);
+ msleep(250);
} while (--loop_count);
return status;
@@ -2521,18 +2521,6 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
hd->cmdPtr = NULL;
}
- /* 7. FC: Rescan for blocked rports which might have returned.
- */
- if (ioc->bus_type == FC) {
- spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- if (ioc->fc_rescan_work_q) {
- if (ioc->fc_rescan_work_count++ == 0) {
- queue_work(ioc->fc_rescan_work_q,
- &ioc->fc_rescan_work);
- }
- }
- spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
- }
dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
}
@@ -2546,7 +2534,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
MPT_SCSI_HOST *hd;
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
- unsigned long flags;
devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
ioc->name, event));
@@ -2569,14 +2556,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
break;
case MPI_EVENT_RESCAN: /* 06 */
- spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- if (ioc->fc_rescan_work_q) {
- if (ioc->fc_rescan_work_count++ == 0) {
- queue_work(ioc->fc_rescan_work_q,
- &ioc->fc_rescan_work);
- }
- }
- spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
break;
/*
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index c08ddac3717d..6ebf38213f9f 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -65,9 +65,7 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_request.h>
#include <scsi/sg.h>
-#include <scsi/sg_request.h>
#define OSM_NAME "scsi-osm"
#define OSM_VERSION "1.316"
@@ -588,6 +586,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
mptr = &msg->body[0];
+#if 0 /* this code can't work */
#ifdef CONFIG_I2O_EXT_ADAPTEC
if (c->adaptec) {
u32 adpt_flags = 0;
@@ -625,6 +624,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
*mptr++ = cpu_to_le32(adpt_flags | tid);
}
#endif
+#endif
msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid);
msg->u.s.icntxt = cpu_to_le32(i2o_scsi_driver.context);
OpenPOWER on IntegriCloud