[PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support

Changes:
 - Added Bus-OSM which could be used by user space programs to reset a
   channel on the controller
 - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and
   move those to its own file
 - Added sysfs attribute for firmware read and write access for I2O
   controllers
 - Added special handling of firmware read and write access for Adaptec
   controllers
 - Added vendor id and product id as sysfs-attribute to Executive classes
 - Added automatic notification of LCT change handling to Exec-OSM
 - Added flushing function to Block-OSM for later barrier implementation
 - Use PRIVATE messages for Block access on Adaptec controllers, which are
   faster then BLOCK class access
 - Cleaned up support for Promise controller
 - New messages are now detected using the IRQ status register as
   suggested by the I2O spec
 - Added i2o_dma_high() and i2o_dma_low() functions
 - Added facility for SG tablesize calculation when using 32-bit and
   64-bit DMA addresses
 - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the
   SG list for 32-bit as well as 64-bit DMA addresses

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 164 insertions, 0 deletions

diff --git a/drivers/message/i2o/bus-osm.c b/drivers/message/i2o/bus-osm.c
new file mode 100644
index 000000000000..d43c35894ae9
--- /dev/null
+++ b/drivers/message/i2o/bus-osm.c
@@ -0,0 +1,164 @@
+/*
+ *	Bus Adapter OSM
+ *
+ *	Copyright (C) 2005	Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation; either version 2 of the License, or (at your
+ *	option) any later version.
+ *
+ *	Fixes/additions:
+ *		Markus Lidel <Markus.Lidel@shadowconnect.com>
+ *			initial version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2o.h>
+
+#define OSM_NAME	"bus-osm"
+#define OSM_VERSION	"$Rev$"
+#define OSM_DESCRIPTION	"I2O Bus Adapter OSM"
+
+static struct i2o_driver i2o_bus_driver;
+
+/* Bus OSM class handling definition */
+static struct i2o_class_id i2o_bus_class_id[] = {
+	{I2O_CLASS_BUS_ADAPTER},
+	{I2O_CLASS_END}
+};
+
+/**
+ *	i2o_bus_scan - Scan the bus for new devices
+ *	@dev: I2O device of the bus, which should be scanned
+ *
+ *	Scans the bus dev for new / removed devices. After the scan a new LCT
+ *	will be fetched automatically.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int i2o_bus_scan(struct i2o_device *dev)
+{
+	struct i2o_message __iomem *msg;
+	u32 m;
+
+	m = i2o_msg_get_wait(dev->iop, &msg, I2O_TIMEOUT_MESSAGE_GET);
+	if (m == I2O_QUEUE_EMPTY)
+		return -ETIMEDOUT;
+
+	writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
+	writel(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data.tid,
+	       &msg->u.head[1]);
+
+	return i2o_msg_post_wait(dev->iop, m, 60);
+};
+
+/**
+ *	i2o_bus_store_scan - Scan the I2O Bus Adapter
+ *	@d: device which should be scanned
+ *
+ *	Returns count.
+ */
+static ssize_t i2o_bus_store_scan(struct device *d, const char *buf,
+				  size_t count)
+{
+	struct i2o_device *i2o_dev = to_i2o_device(d);
+	int rc;
+
+	if ((rc = i2o_bus_scan(i2o_dev)))
+		osm_warn("bus scan failed %d\n", rc);
+
+	return count;
+}
+
+/* Bus Adapter OSM device attributes */
+static DEVICE_ATTR(scan, S_IWUSR, NULL, i2o_bus_store_scan);
+
+/**
+ *	i2o_bus_probe - verify if dev is a I2O Bus Adapter device and install it
+ *	@dev: device to verify if it is a I2O Bus Adapter device
+ *
+ *	Because we want all Bus Adapters always return 0.
+ *
+ *	Returns 0.
+ */
+static int i2o_bus_probe(struct device *dev)
+{
+	struct i2o_device *i2o_dev = to_i2o_device(get_device(dev));
+
+	device_create_file(dev, &dev_attr_scan);
+
+	osm_info("device added (TID: %03x)\n", i2o_dev->lct_data.tid);
+
+	return 0;
+};
+
+/**
+ *	i2o_bus_remove - remove the I2O Bus Adapter device from the system again
+ *	@dev: I2O Bus Adapter device which should be removed
+ *
+ *	Always returns 0.
+ */
+static int i2o_bus_remove(struct device *dev)
+{
+	struct i2o_device *i2o_dev = to_i2o_device(dev);
+
+	device_remove_file(dev, &dev_attr_scan);
+
+	put_device(dev);
+
+	osm_info("device removed (TID: %03x)\n", i2o_dev->lct_data.tid);
+
+	return 0;
+};
+
+/* Bus Adapter OSM driver struct */
+static struct i2o_driver i2o_bus_driver = {
+	.name = OSM_NAME,
+	.classes = i2o_bus_class_id,
+	.driver = {
+		   .probe = i2o_bus_probe,
+		   .remove = i2o_bus_remove,
+		   },
+};
+
+/**
+ *	i2o_bus_init - Bus Adapter OSM initialization function
+ *
+ *	Only register the Bus Adapter OSM in the I2O core.
+ *
+ *	Returns 0 on success or negative error code on failure.
+ */
+static int __init i2o_bus_init(void)
+{
+	int rc;
+
+	printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
+
+	/* Register Bus Adapter OSM into I2O core */
+	rc = i2o_driver_register(&i2o_bus_driver);
+	if (rc) {
+		osm_err("Could not register Bus Adapter OSM\n");
+		return rc;
+	}
+
+	return 0;
+};
+
+/**
+ *	i2o_bus_exit - Bus Adapter OSM exit function
+ *
+ *	Unregisters Bus Adapter OSM from I2O core.
+ */
+static void __exit i2o_bus_exit(void)
+{
+	i2o_driver_unregister(&i2o_bus_driver);
+};
+
+MODULE_AUTHOR("Markus Lidel <Markus.Lidel@shadowconnect.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(OSM_DESCRIPTION);
+MODULE_VERSION(OSM_VERSION);
+
+module_init(i2o_bus_init);
+module_exit(i2o_bus_exit);