[SCSI] mpt fusion: Fixing 1078 data corruption issue for 36GB memory region

The reason for this change is there is a data corruption when four different
physical memory regions in the 36GB to 37GB region are
accessed. This is only affecting 1078.

The solution is we need to use different addressing when filling in
the scatter gather table for the effected memory regions.  So instead
of snooping on all four different memory holes, we treat any physical
addresses in the 36GB address with the same algorithm.

The fix is explained below
1) Ensure that the message frames are NOT located in the trouble
region. There is no remapping available for message frames, they must
be allocated outside the problem region.
2) Ensure that Sense buffers are NOT in the trouble region. There is
no remapping available.
3) Walk through the SGE entries and if any are inside the trouble region
   then they need to be remapped as discussed below.
	1) Set the Local Address bit in the SGE Flags field.
  	MPI_SGE_FLAGS_LOCAL_ADDRESS
  	2) Ensure we are using 64-bit SGEs
  	3) Set MSb (Bit 63) of the 64-bit address, this will indicate buffer
	location is Host Memory.

Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 19 insertions, 83 deletions

diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index e62c6bc4ad33..8c08c73f194c 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -113,69 +113,6 @@ int 		mptscsih_resume(struct pci_dev *pdev);
 
 #define SNS_LEN(scp)	SCSI_SENSE_BUFFERSIZE
 
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_sge - Place a simple SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@flagslength: SGE flags and data transfer length
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pSge->Address.High = cpu_to_le32(tmp);
-
-	} else {
-		SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
-		pSge->FlagsLength = cpu_to_le32(flagslength);
-		pSge->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_sge() */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- *	mptscsih_add_chain - Place a chain SGE at address pAddr.
- *	@pAddr: virtual address for SGE
- *	@next: nextChainOffset value (u32's)
- *	@length: length of next SGL segment
- *	@dma_addr: Physical address
- *
- *	This routine places a MPT request frame back on the MPT adapter's
- *	FreeQ.
- */
-static inline void
-mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
-{
-	if (sizeof(dma_addr_t) == sizeof(u64)) {
-		SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
-		u32 tmp = dma_addr & 0xFFFFFFFF;
-
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-
-		pChain->NextChainOffset = next;
-
-		pChain->Address.Low = cpu_to_le32(tmp);
-		tmp = (u32) ((u64)dma_addr >> 32);
-		pChain->Address.High = cpu_to_le32(tmp);
-	} else {
-		SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
-		pChain->Length = cpu_to_le16(length);
-		pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-		pChain->NextChainOffset = next;
-		pChain->Address = cpu_to_le32(dma_addr);
-	}
-} /* mptscsih_add_chain() */
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -281,10 +218,10 @@ mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
 	 */
 
 nextSGEset:
-	numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
+	numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
 	numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
 
-	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
+	sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
 
 	/* Get first (num - 1) SG elements
 	 * Skip any SG entries with a length of 0
@@ -299,11 +236,11 @@ nextSGEset:
 		}
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
 
 		sg = sg_next(sg);	/* Get next SG element from the OS */
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		psge += ioc->SGE_size;
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 	}
 
@@ -320,12 +257,8 @@ nextSGEset:
 		thisxfer = sg_dma_len(sg);
 
 		v2 = sg_dma_address(sg);
-		mptscsih_add_sge(psge, sgflags | thisxfer, v2);
-		/*
-		sg = sg_next(sg);
-		psge += (sizeof(u32) + sizeof(dma_addr_t));
-		*/
-		sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+		ioc->add_sge(psge, sgflags | thisxfer, v2);
+		sgeOffset += ioc->SGE_size;
 		sg_done++;
 
 		if (chainSge) {
@@ -334,7 +267,8 @@ nextSGEset:
 			 * Update the chain element
 			 * Offset and Length fields.
 			 */
-			mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			ioc->add_chain((char *)chainSge, 0, sgeOffset,
+				ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The current buffer is the original MF
 			 * and there is no Chain buffer.
@@ -367,7 +301,7 @@ nextSGEset:
 		 * set properly).
 		 */
 		if (sg_done) {
-			u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
+			u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
 			sgflags = le32_to_cpu(*ptmp);
 			sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
 			*ptmp = cpu_to_le32(sgflags);
@@ -381,8 +315,9 @@ nextSGEset:
 			 * Old chain element is now complete.
 			 */
 			u8 nextChain = (u8) (sgeOffset >> 2);
-			sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
-			mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+			sgeOffset += ioc->SGE_size;
+			ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
+					 ioc->ChainBufferDMA + chain_dma_off);
 		} else {
 			/* The original MF buffer requires a chain buffer -
 			 * set the offset.
@@ -1422,7 +1357,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	pScsiReq->CDBLength = SCpnt->cmd_len;
 	pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
 	pScsiReq->Reserved = 0;
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
 	pScsiReq->Control = cpu_to_le32(scsictl);
 
@@ -1448,7 +1383,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	 */
 	if (datalen == 0) {
 		/* Add a NULL SGE */
-		mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
+		ioc->add_sge((char *)&pScsiReq->SGL,
+			MPT_SGE_FLAGS_SSIMPLE_READ | 0,
 			(dma_addr_t) -1);
 	} else {
 		/* Add a 32 or 64 bit SGE */
@@ -3172,7 +3108,7 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 
 	pScsiReq->Reserved = 0;
 
-	pScsiReq->MsgFlags = mpt_msg_flags();
+	pScsiReq->MsgFlags = mpt_msg_flags(ioc);
 	/* MsgContext set in mpt_get_msg_fram call  */
 
 	int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
@@ -3199,11 +3135,11 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
 			ioc->name, cmd, io->channel, io->id, io->lun));
 
 	if (dir == MPI_SCSIIO_CONTROL_READ) {
-		mpt_add_sge((char *) &pScsiReq->SGL,
+		ioc->add_sge((char *) &pScsiReq->SGL,
 			MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
 			io->data_dma);
 	} else {
-		mpt_add_sge((char *) &pScsiReq->SGL,
+		ioc->add_sge((char *) &pScsiReq->SGL,
 			MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
 			io->data_dma);
 	}