diff options
author | Mauro Carvalho Chehab <mchehab@infradead.org> | 2008-04-17 21:48:00 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2008-04-24 14:09:42 -0300 |
commit | c67ec53f8f4e90ebd482789e2f6d121f41a0bd90 (patch) | |
tree | 7c5c242cb50e8b1bfdeab4157370c7dbfda34bf9 /drivers/media | |
parent | 82ac4f876505615ba9dc6a73cd9a584bad8fe23f (diff) | |
download | blackbird-op-linux-c67ec53f8f4e90ebd482789e2f6d121f41a0bd90.tar.gz blackbird-op-linux-c67ec53f8f4e90ebd482789e2f6d121f41a0bd90.zip |
V4L/DVB (7615): em28xx: Provide the proper support for switching between analog/digital
Before this patch, HVR900/HVR950 were incorreclty going back to analog. The
result is that only digital were working.
This patch provides the proper setup for analog/digital and tuner callback.
It also properly resets analog into a sane state at open().
Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org>
for helping to set the proper parameters to GPO/GPIO em2883 ports.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 81 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx-core.c | 90 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx-dvb.c | 20 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx-video.c | 12 | ||||
-rw-r--r-- | drivers/media/video/em28xx/em28xx.h | 22 |
5 files changed, 150 insertions, 75 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ed50b4e55264..13ffde281067 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -436,19 +436,25 @@ MODULE_DEVICE_TABLE(usb, em28xx_id_table); /* Board Hauppauge WinTV HVR 900 analog */ struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { - { -1, -1, 6}, - {EM28XX_R08_GPIO, 0x2d, 10}, - {EM28XX_R08_GPIO, 0x3d, 5}, - { -1, -1, -1}, + {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10}, + {0x05, 0xff, 0x10, 10}, + { -1, -1, -1, -1}, }; + /* Board Hauppauge WinTV HVR 900 digital */ struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { - { -1, -1, 6}, - {EM28XX_R08_GPIO, 0x2e, 6}, - {EM28XX_R08_GPIO, 0x3e, 6}, - {EM2880_R04_GPO, 0x04, 10}, - {EM2880_R04_GPO, 0x0c, 10}, - { -1, -1, -1}, + {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0x0f, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 tuner_callback */ +struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = { + {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + { -1, -1, -1, -1}, }; /* @@ -469,7 +475,6 @@ int em28xx_tuner_callback(void *ptr, int command, int arg) { int rc = 0; struct em28xx *dev = ptr; - struct em28xx_reg_seq *gpio; if (dev->tuner_type != TUNER_XC2028) return 0; @@ -478,32 +483,10 @@ int em28xx_tuner_callback(void *ptr, int command, int arg) return 0; if (dev->mode == EM28XX_ANALOG_MODE) - gpio = dev->analog_gpio; + rc = em28xx_gpio_set(dev, dev->tun_analog_gpio); else - gpio = dev->digital_gpio; + rc = em28xx_gpio_set(dev, dev->tun_digital_gpio); - /* djh - Not sure if these are still required */ - dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); - if (dev->mode == EM28XX_ANALOG_MODE) - dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); - else - dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1); - msleep(6); - - if (!gpio) - return rc; - - /* Send GPIO reset sequences specified at board entry */ - while (gpio->sleep >= 0) { - if (gpio->reg >= 0) - rc = dev->em28xx_write_regs(dev, - gpio->reg, - &gpio->val, 1); - if (gpio->sleep > 0) - msleep(gpio->sleep); - - gpio++; - } return rc; } EXPORT_SYMBOL_GPL(em28xx_tuner_callback); @@ -527,6 +510,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) { int rc; + rc = em28xx_read_reg(dev, EM2880_R04_GPO); + if (rc >= 0) + dev->reg_gpo = rc; + dev->wait_after_write = 5; rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (rc > 0) { @@ -547,24 +534,24 @@ void em28xx_pre_card_setup(struct em28xx *dev) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: - em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1); + em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); - em28xx_write_regs(dev, 0x08, "\xff", 1); - em28xx_write_regs(dev, 0x04, "\x00", 1); - msleep(100); - em28xx_write_regs(dev, 0x04, "\x08", 1); - msleep(100); - em28xx_write_regs(dev, 0x08, "\xff", 1); - msleep(50); - em28xx_write_regs(dev, 0x08, "\x2d", 1); msleep(50); - em28xx_write_regs(dev, 0x08, "\x3d", 1); - dev->analog_gpio = hauppauge_wintv_hvr_900_analog; - dev->digital_gpio = hauppauge_wintv_hvr_900_digital; + /* Sets GPO/GPIO sequences for this device */ + dev->analog_gpio = hauppauge_wintv_hvr_900_analog; + dev->digital_gpio = hauppauge_wintv_hvr_900_digital; + dev->tun_analog_gpio = hauppauge_wintv_hvr_900_tuner_callback; + dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback; break; } + + em28xx_gpio_set(dev, dev->tun_analog_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + + /* Unlock device */ + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); } void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index bd7794f4fd74..db40358c773b 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -134,7 +134,10 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, unsigned char *bufs; if (dev->state & DEV_DISCONNECTED) - return(-ENODEV); + return -ENODEV; + + if (len < 1) + return -EINVAL; bufs = kmalloc(len, GFP_KERNEL); @@ -162,7 +165,23 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len) { - return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len); + int rc; + + rc = em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len); + + /* Stores GPO/GPIO values at the cache, if changed + Only write values should be stored, since input on a GPIO + register will return the input bits. + Not sure what happens on reading GPO register. + */ + if (rc >= 0) { + if (reg == EM2880_R04_GPO) + dev->reg_gpo = buf[0]; + else if (reg == EM28XX_R08_GPIO) + dev->reg_gpio = buf[0]; + } + + return rc; } /* @@ -176,12 +195,19 @@ static int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val, int oldval; u8 newval; - oldval = em28xx_read_reg(dev, reg); + /* Uses cache for gpo/gpio registers */ + if (reg == EM2880_R04_GPO) + oldval = dev->reg_gpo; + else if (reg == EM28XX_R08_GPIO) + oldval = dev->reg_gpio; + else + oldval = em28xx_read_reg(dev, reg); if (oldval < 0) return oldval; newval = (((u8) oldval) & ~bitmask) | (val & bitmask); + return em28xx_write_regs(dev, reg, &newval, 1); } @@ -472,6 +498,57 @@ int em28xx_set_alternate(struct em28xx *dev) return 0; } +int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio) +{ + int rc = 0; + + if (!gpio) + return rc; + + dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); + if (dev->mode == EM28XX_ANALOG_MODE) + dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); + else + dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1); + msleep(6); + + /* Send GPIO reset sequences specified at board entry */ + while (gpio->sleep >= 0) { + if (gpio->reg >= 0) { + rc = em28xx_write_reg_bits(dev, + gpio->reg, + gpio->val, + gpio->mask); + if (rc < 0) + return rc; + } + if (gpio->sleep > 0) + msleep(gpio->sleep); + + gpio++; + } + return rc; +} + +int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode) +{ + if (dev->mode == set_mode) + return 0; + + if (set_mode == EM28XX_MODE_UNDEFINED) { + dev->mode = set_mode; + return 0; + } + + dev->mode = set_mode; + + if (dev->mode == EM28XX_DIGITAL_MODE) + return em28xx_gpio_set(dev, dev->digital_gpio); + else + return em28xx_gpio_set(dev, dev->analog_gpio); +} +EXPORT_SYMBOL_GPL(em28xx_set_mode); + /* ------------------------------------------------------------------ URB control ------------------------------------------------------------------*/ @@ -548,8 +625,7 @@ EXPORT_SYMBOL_GPL(em28xx_uninit_isoc); */ int em28xx_init_isoc(struct em28xx *dev, int max_packets, int num_bufs, int max_pkt_size, - int (*isoc_copy) (struct em28xx *dev, struct urb *urb), - int cap_type) + int (*isoc_copy) (struct em28xx *dev, struct urb *urb)) { struct em28xx_dmaqueue *dma_q = &dev->vidq; int i; @@ -612,7 +688,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets, should also be using 'desc.bInterval' */ pipe = usb_rcvisocpipe(dev->udev, - cap_type == EM28XX_ANALOG_CAPTURE ? 0x82 : 0x84); + dev->mode == EM28XX_ANALOG_MODE ? 0x82 : 0x84); usb_fill_int_urb(urb, dev->udev, pipe, dev->isoc_ctl.transfer_buffer[i], sb_size, @@ -632,7 +708,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets, init_waitqueue_head(&dma_q->wq); - em28xx_capture_start(dev, cap_type); + em28xx_capture_start(dev, 1); /* submit urbs and enables IRQ */ for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 39581d976e01..2e9ec626b609 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -137,14 +137,17 @@ static inline int dvb_isoc_copy(struct em28xx *dev, struct urb *urb) static int start_streaming(struct em28xx_dvb *dvb) { + int rc; struct em28xx *dev = dvb->adapter.priv; usb_set_interface(dev->udev, 0, 1); - dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); + rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); + if (rc < 0) + return rc; return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, EM28XX_DVB_NUM_BUFS, EM28XX_DVB_MAX_PACKETSIZE, - dvb_isoc_copy, EM28XX_DIGITAL_CAPTURE); + dvb_isoc_copy); } static int stop_streaming(struct em28xx_dvb *dvb) @@ -152,6 +155,9 @@ static int stop_streaming(struct em28xx_dvb *dvb) struct em28xx *dev = dvb->adapter.priv; em28xx_uninit_isoc(dev); + + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); + return 0; } @@ -368,13 +374,10 @@ static int dvb_init(struct em28xx *dev) } dev->dvb = dvb; + em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); /* init frontend */ switch (dev->model) { case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: - /* Enable lgdt330x */ - dev->mode = EM28XX_DIGITAL_MODE; - em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0); - dvb->frontend = dvb_attach(lgdt330x_attach, &em2880_lgdt3303_dev, &dev->i2c_adap); @@ -384,9 +387,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - /* Enable zl10353 */ - dev->mode = EM28XX_DIGITAL_MODE; - em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0); dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_with_xc3028, &dev->i2c_adap); @@ -415,10 +415,12 @@ static int dvb_init(struct em28xx *dev) if (result < 0) goto out_free; + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); printk(KERN_INFO "Successfully loaded em28xx-dvb\n"); return 0; out_free: + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); kfree(dvb); dev->dvb = NULL; return result; diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index fb533fda2198..4ffd064c402a 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -461,7 +461,7 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, if (urb_init) { rc = em28xx_init_isoc(dev, EM28XX_NUM_PACKETS, EM28XX_NUM_BUFS, dev->max_pkt_size, - em28xx_isoc_copy, EM28XX_ANALOG_CAPTURE); + em28xx_isoc_copy); if (rc < 0) goto fail; } @@ -1534,8 +1534,8 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) em28xx_videodbg("open minor=%d type=%s users=%d\n", minor, v4l2_type_names[fh_type], dev->users); - fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); + fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); return -ENOMEM; @@ -1552,9 +1552,15 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev->hscale = 0; dev->vscale = 0; + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_alternate(dev); em28xx_resolution_set(dev); + /* Needed, since GPIO might have disabled power of + some i2c device + */ + em28xx_config_i2c(dev); + } if (fh->radio) { em28xx_videodbg("video_open: setting radio device\n"); @@ -1568,6 +1574,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); + return errCode; } @@ -1647,6 +1654,7 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) /* do this before setting alternate! */ em28xx_uninit_isoc(dev); + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); /* set alternate 0 */ dev->alt = 0; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index e4a56d8dfcf4..e0d119c22810 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -110,6 +110,7 @@ #define EM2800_I2C_WRITE_TIMEOUT 20 enum em28xx_mode { + EM28XX_MODE_UNDEFINED, EM28XX_ANALOG_MODE, EM28XX_DIGITAL_MODE, }; @@ -228,7 +229,7 @@ enum em28xx_decoder { struct em28xx_reg_seq { int reg; - unsigned char val; + unsigned char val, mask; int sleep; }; @@ -274,12 +275,6 @@ enum em28xx_dev_state { DEV_MISCONFIGURED = 0x04, }; -enum em28xx_capture_mode { - EM28XX_CAPTURE_OFF = 0, - EM28XX_ANALOG_CAPTURE, - EM28XX_DIGITAL_CAPTURE, -}; - #define EM28XX_AUDIO_BUFS 5 #define EM28XX_NUM_AUDIO_PACKETS 64 #define EM28XX_AUDIO_MAX_PACKET_SIZE 196 /* static value */ @@ -335,9 +330,12 @@ struct em28xx { /* Some older em28xx chips needs a waiting time after writing */ unsigned int wait_after_write; - /* GPIO sequences for tuner callback */ + /* GPIO sequences for analog and digital mode */ struct em28xx_reg_seq *analog_gpio, *digital_gpio; + /* GPIO sequences for tuner callbacks */ + struct em28xx_reg_seq *tun_analog_gpio, *tun_digital_gpio; + int video_inputs; /* number of video inputs */ struct list_head devlist; @@ -415,6 +413,9 @@ struct em28xx { enum em28xx_mode mode; + /* Caches GPO and GPIO registers */ + unsigned char reg_gpo, reg_gpio; + struct em28xx_dvb *dvb; }; @@ -455,9 +456,10 @@ int em28xx_resolution_set(struct em28xx *dev); int em28xx_set_alternate(struct em28xx *dev); int em28xx_init_isoc(struct em28xx *dev, int max_packets, int num_bufs, int max_pkt_size, - int (*isoc_copy) (struct em28xx *dev, struct urb *urb), - int cap_type); + int (*isoc_copy) (struct em28xx *dev, struct urb *urb)); void em28xx_uninit_isoc(struct em28xx *dev); +int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode); +int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio); /* Provided by em28xx-video.c */ int em28xx_register_extension(struct em28xx_ops *dev); |