V4L/DVB(7879): Adding cx18 Support for mxl5005s

Adding cx18 Support

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

3 files changed, 22 insertions, 22 deletions

diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 35a55998a8d3..5f942690570c 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -11,6 +11,7 @@ config VIDEO_CX18
 	select VIDEO_CX2341X
 	select VIDEO_CS5345
 	select DVB_S5H1409
+	select MEDIA_TUNER_MXL5005S
 	---help---
 	  This is a video4linux driver for Conexant cx23418 based
 	  PCI combo video recorder devices.
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index f5e3ba1f5354..bf6f7edca887 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -51,7 +51,8 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
 	.v4l2_capabilities = CX18_CAP_ENCODER,
 	.hw_audio_ctrl = CX18_HW_CX23418,
 	.hw_muxer = CX18_HW_CS5345,
-	.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345
+		| CX18_HW_DVB,
 	.video_inputs = {
 		{ CX18_CARD_INPUT_VID_TUNER,  0, CX23418_COMPOSITE7 },
 		{ CX18_CARD_INPUT_SVIDEO1,    1, CX23418_SVIDEO1    },
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 65efe69d939a..c9744173f969 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -24,25 +24,27 @@
 #include "cx18-streams.h"
 #include "cx18-cards.h"
 #include "s5h1409.h"
-
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
-#include "mxl500x.h"
-#endif
+#include "mxl5005s.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
 
-#ifdef HAVE_MXL500X
-static struct mxl500x_config hauppauge_hvr1600_tuner = {
-	.delsys    = MXL500x_MODE_ATSC,
-	.octf      = MXL500x_OCTF_CH,
-	.xtal_freq = 16000000,
-	.iflo_freq = 5380000,
-	.ref_freq  = 322800000,
-	.rssi_ena  = MXL_RSSI_ENABLE,
-	.addr      = 0xC6 >> 1,
+static struct mxl5005s_config hauppauge_hvr1600_tuner = {
+	.i2c_address     = 0xC6 >> 1,
+	.if_freq         = IF_FREQ_5380000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C_H,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
 };
 
 static struct s5h1409_config hauppauge_hvr1600_config = {
@@ -55,7 +57,6 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 
 };
-#endif
 
 static int dvb_register(struct cx18_stream *stream);
 
@@ -252,21 +253,18 @@ static int dvb_register(struct cx18_stream *stream)
 	int ret = 0;
 
 	switch (cx->card->type) {
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
 	case CX18_CARD_HVR_1600_ESMT:
 	case CX18_CARD_HVR_1600_SAMSUNG:
 		dvb->fe = dvb_attach(s5h1409_attach,
 			&hauppauge_hvr1600_config,
 			&cx->i2c_adap[0]);
 		if (dvb->fe != NULL) {
-			dvb_attach(mxl500x_attach, dvb->fe,
-				&hauppauge_hvr1600_tuner,
-				&cx->i2c_adap[0]);
+			dvb_attach(mxl5005s_attach, dvb->fe,
+				&cx->i2c_adap[0],
+				&hauppauge_hvr1600_tuner);
 			ret = 0;
 		}
 		break;
-#endif
 	default:
 		/* No Digital Tv Support */
 		break;