Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...

1 files changed, 0 insertions, 302 deletions

diff --git a/drivers/media/usb/sn9c102/sn9c102_pas106b.c b/drivers/media/usb/sn9c102/sn9c102_pas106b.c
deleted file mode 100644
index 81cd969c1b7b..000000000000
--- a/drivers/media/usb/sn9c102/sn9c102_pas106b.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/***************************************************************************
- * Plug-in for PAS106B image sensor connected to the SN9C1xx PC Camera     *
- * Controllers                                                             *
- *                                                                         *
- * Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>  *
- *                                                                         *
- * This program is free software; you can redistribute it and/or modify    *
- * it under the terms of the GNU General Public License as published by    *
- * the Free Software Foundation; either version 2 of the License, or       *
- * (at your option) any later version.                                     *
- *                                                                         *
- * This program is distributed in the hope that it will be useful,         *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
- * GNU General Public License for more details.                            *
- *                                                                         *
- * You should have received a copy of the GNU General Public License       *
- * along with this program; if not, write to the Free Software             *
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
- ***************************************************************************/
-
-#include <linux/delay.h>
-#include "sn9c102_sensor.h"
-#include "sn9c102_devtable.h"
-
-
-static int pas106b_init(struct sn9c102_device* cam)
-{
-	int err = 0;
-
-	err = sn9c102_write_const_regs(cam, {0x00, 0x10}, {0x00, 0x11},
-				       {0x00, 0x14}, {0x20, 0x17},
-				       {0x20, 0x19}, {0x09, 0x18});
-
-	err += sn9c102_i2c_write(cam, 0x02, 0x0c);
-	err += sn9c102_i2c_write(cam, 0x05, 0x5a);
-	err += sn9c102_i2c_write(cam, 0x06, 0x88);
-	err += sn9c102_i2c_write(cam, 0x07, 0x80);
-	err += sn9c102_i2c_write(cam, 0x10, 0x06);
-	err += sn9c102_i2c_write(cam, 0x11, 0x06);
-	err += sn9c102_i2c_write(cam, 0x12, 0x00);
-	err += sn9c102_i2c_write(cam, 0x14, 0x02);
-	err += sn9c102_i2c_write(cam, 0x13, 0x01);
-
-	msleep(400);
-
-	return err;
-}
-
-
-static int pas106b_get_ctrl(struct sn9c102_device* cam,
-			    struct v4l2_control* ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE:
-		{
-			int r1 = sn9c102_i2c_read(cam, 0x03),
-			    r2 = sn9c102_i2c_read(cam, 0x04);
-			if (r1 < 0 || r2 < 0)
-				return -EIO;
-			ctrl->value = (r1 << 4) | (r2 & 0x0f);
-		}
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0)
-			return -EIO;
-		ctrl->value &= 0x1f;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0)
-			return -EIO;
-		ctrl->value &= 0x1f;
-		return 0;
-	case V4L2_CID_GAIN:
-		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0e)) < 0)
-			return -EIO;
-		ctrl->value &= 0x1f;
-		return 0;
-	case V4L2_CID_CONTRAST:
-		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0f)) < 0)
-			return -EIO;
-		ctrl->value &= 0x07;
-		return 0;
-	case SN9C102_V4L2_CID_GREEN_BALANCE:
-		if ((ctrl->value = sn9c102_i2c_read(cam, 0x0a)) < 0)
-			return -EIO;
-		ctrl->value = (ctrl->value & 0x1f) << 1;
-		return 0;
-	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
-		if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0)
-			return -EIO;
-		ctrl->value &= 0xf8;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-
-static int pas106b_set_ctrl(struct sn9c102_device* cam,
-			    const struct v4l2_control* ctrl)
-{
-	int err = 0;
-
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE:
-		err += sn9c102_i2c_write(cam, 0x03, ctrl->value >> 4);
-		err += sn9c102_i2c_write(cam, 0x04, ctrl->value & 0x0f);
-		break;
-	case V4L2_CID_RED_BALANCE:
-		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		err += sn9c102_i2c_write(cam, 0x09, ctrl->value);
-		break;
-	case V4L2_CID_GAIN:
-		err += sn9c102_i2c_write(cam, 0x0e, ctrl->value);
-		break;
-	case V4L2_CID_CONTRAST:
-		err += sn9c102_i2c_write(cam, 0x0f, ctrl->value);
-		break;
-	case SN9C102_V4L2_CID_GREEN_BALANCE:
-		err += sn9c102_i2c_write(cam, 0x0a, ctrl->value >> 1);
-		err += sn9c102_i2c_write(cam, 0x0b, ctrl->value >> 1);
-		break;
-	case SN9C102_V4L2_CID_DAC_MAGNITUDE:
-		err += sn9c102_i2c_write(cam, 0x08, ctrl->value << 3);
-		break;
-	default:
-		return -EINVAL;
-	}
-	err += sn9c102_i2c_write(cam, 0x13, 0x01);
-
-	return err ? -EIO : 0;
-}
-
-
-static int pas106b_set_crop(struct sn9c102_device* cam,
-			    const struct v4l2_rect* rect)
-{
-	struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
-	int err = 0;
-	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4,
-	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3;
-
-	err += sn9c102_write_reg(cam, h_start, 0x12);
-	err += sn9c102_write_reg(cam, v_start, 0x13);
-
-	return err;
-}
-
-
-static int pas106b_set_pix_format(struct sn9c102_device* cam,
-				  const struct v4l2_pix_format* pix)
-{
-	int err = 0;
-
-	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
-		err += sn9c102_write_reg(cam, 0x2c, 0x17);
-	else
-		err += sn9c102_write_reg(cam, 0x20, 0x17);
-
-	return err;
-}
-
-
-static const struct sn9c102_sensor pas106b = {
-	.name = "PAS106B",
-	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
-	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
-	.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
-	.interface = SN9C102_I2C_2WIRES,
-	.i2c_slave_id = 0x40,
-	.init = &pas106b_init,
-	.qctrl = {
-		{
-			.id = V4L2_CID_EXPOSURE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "exposure",
-			.minimum = 0x125,
-			.maximum = 0xfff,
-			.step = 0x001,
-			.default_value = 0x140,
-			.flags = 0,
-		},
-		{
-			.id = V4L2_CID_GAIN,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "global gain",
-			.minimum = 0x00,
-			.maximum = 0x1f,
-			.step = 0x01,
-			.default_value = 0x0d,
-			.flags = 0,
-		},
-		{
-			.id = V4L2_CID_CONTRAST,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "contrast",
-			.minimum = 0x00,
-			.maximum = 0x07,
-			.step = 0x01,
-			.default_value = 0x00, /* 0x00~0x03 have same effect */
-			.flags = 0,
-		},
-		{
-			.id = V4L2_CID_RED_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "red balance",
-			.minimum = 0x00,
-			.maximum = 0x1f,
-			.step = 0x01,
-			.default_value = 0x04,
-			.flags = 0,
-		},
-		{
-			.id = V4L2_CID_BLUE_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "blue balance",
-			.minimum = 0x00,
-			.maximum = 0x1f,
-			.step = 0x01,
-			.default_value = 0x06,
-			.flags = 0,
-		},
-		{
-			.id = SN9C102_V4L2_CID_GREEN_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "green balance",
-			.minimum = 0x00,
-			.maximum = 0x3e,
-			.step = 0x02,
-			.default_value = 0x02,
-			.flags = 0,
-		},
-		{
-			.id = SN9C102_V4L2_CID_DAC_MAGNITUDE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "DAC magnitude",
-			.minimum = 0x00,
-			.maximum = 0x1f,
-			.step = 0x01,
-			.default_value = 0x01,
-			.flags = 0,
-		},
-	},
-	.get_ctrl = &pas106b_get_ctrl,
-	.set_ctrl = &pas106b_set_ctrl,
-	.cropcap = {
-		.bounds = {
-			.left = 0,
-			.top = 0,
-			.width = 352,
-			.height = 288,
-		},
-		.defrect = {
-			.left = 0,
-			.top = 0,
-			.width = 352,
-			.height = 288,
-		},
-	},
-	.set_crop = &pas106b_set_crop,
-	.pix_format = {
-		.width = 352,
-		.height = 288,
-		.pixelformat = V4L2_PIX_FMT_SBGGR8,
-		.priv = 8, /* we use this field as 'bits per pixel' */
-	},
-	.set_pix_format = &pas106b_set_pix_format
-};
-
-
-int sn9c102_probe_pas106b(struct sn9c102_device* cam)
-{
-	int r0 = 0, r1 = 0;
-	unsigned int pid = 0;
-
-	/*
-	   Minimal initialization to enable the I2C communication
-	   NOTE: do NOT change the values!
-	*/
-	if (sn9c102_write_const_regs(cam,
-				     {0x01, 0x01}, /* sensor power down */
-				     {0x00, 0x01}, /* sensor power on */
-				    {0x28, 0x17})) /* sensor clock at 24 MHz */
-		return -EIO;
-
-	r0 = sn9c102_i2c_try_read(cam, &pas106b, 0x00);
-	r1 = sn9c102_i2c_try_read(cam, &pas106b, 0x01);
-	if (r0 < 0 || r1 < 0)
-		return -EIO;
-
-	pid = (r0 << 11) | ((r1 & 0xf0) >> 4);
-	if (pid != 0x007)
-		return -ENODEV;
-
-	sn9c102_attach_sensor(cam, &pas106b);
-
-	return 0;
-}