[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 856 deletions

diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
deleted file mode 100644
index 033cd7ad3ca2..000000000000
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ /dev/null
@@ -1,856 +0,0 @@
-/*
- * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
- *
- *  Copyright (C) 2001-5, B2C2 inc.
- *
- *  GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
- *
- *  This driver is "hard-coded" to be used with the 1st generation of
- *  Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
- *  (Panasonic CT10S) is located here, which is actually wrong. Unless there is
- *  another device with a BCM3510, this is no problem.
- *
- *  The driver works also with QAM64 DVB-C, but had an unreasonable high
- *  UNC. (Tested with the Air2PC ATSC 1st generation)
- *
- *  You'll need a firmware for this driver in order to get it running. It is
- *  called "dvb-fe-bcm3510-01.fw".
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 675 Mass
- * Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/jiffies.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include "dvb_frontend.h"
-#include "bcm3510.h"
-#include "bcm3510_priv.h"
-
-struct bcm3510_state {
-
-	struct i2c_adapter* i2c;
-	const struct bcm3510_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	struct mutex hab_mutex;
-	u8 firmware_loaded:1;
-
-	unsigned long next_status_check;
-	unsigned long status_check_interval;
-	struct bcm3510_hab_cmd_status1 status1;
-	struct bcm3510_hab_cmd_status2 status2;
-};
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
-
-#define dprintk(level,x...) if (level & debug) printk(x)
-#define dbufout(b,l,m) {\
-	    int i; \
-	    for (i = 0; i < l; i++) \
-		m("%02x ",b[i]); \
-}
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_i2c(args...)  dprintk(0x02,args)
-#define deb_hab(args...)  dprintk(0x04,args)
-
-/* transfer functions */
-static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
-{
-	u8 b[256];
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 };
-
-	b[0] = reg;
-	memcpy(&b[1],buf,len);
-
-	deb_i2c("i2c wr %02x: ",reg);
-	dbufout(buf,len,deb_i2c);
-	deb_i2c("\n");
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-
-		deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n",
-			__func__, state->config->demod_address, reg,  err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
-{
-	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,        .buf = &reg, .len = 1 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf,  .len = len }
-	};
-	int err;
-
-	memset(buf,0,len);
-
-	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-		deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n",
-			__func__, state->config->demod_address, reg,  err);
-		return -EREMOTEIO;
-	}
-	deb_i2c("i2c rd %02x: ",reg);
-	dbufout(buf,len,deb_i2c);
-	deb_i2c("\n");
-
-	return 0;
-}
-
-static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v)
-{
-	return bcm3510_writebytes(state,reg,&v.raw,1);
-}
-
-static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v)
-{
-	return bcm3510_readbytes(state,reg,&v->raw,1);
-}
-
-/* Host Access Buffer transfers */
-static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len)
-{
-	bcm3510_register_value v;
-	int ret,i;
-
-	v.HABADR_a6.HABADR = 0;
-	if ((ret = bcm3510_writeB(st,0xa6,v)) < 0)
-		return ret;
-
-	for (i = 0; i < len; i++) {
-		if ((ret = bcm3510_readB(st,0xa7,&v)) < 0)
-			return ret;
-		buf[i] = v.HABDATA_a7;
-	}
-	return 0;
-}
-
-static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
-{
-	bcm3510_register_value v,hab;
-	int ret,i;
-	unsigned long t;
-
-/* Check if any previous HAB request still needs to be serviced by the
- * Acquisition Processor before sending new request */
-	if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
-		return ret;
-	if (v.HABSTAT_a8.HABR) {
-		deb_info("HAB is running already - clearing it.\n");
-		v.HABSTAT_a8.HABR = 0;
-		bcm3510_writeB(st,0xa8,v);
-//		return -EBUSY;
-	}
-
-/* Send the start HAB Address (automatically incremented after write of
- * HABDATA) and write the HAB Data */
-	hab.HABADR_a6.HABADR = 0;
-	if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0)
-		return ret;
-
-	for (i = 0; i < len; i++) {
-		hab.HABDATA_a7 = buf[i];
-		if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0)
-			return ret;
-	}
-
-/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to
- * be written) */
-	v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1;
-	if ((ret = bcm3510_writeB(st,0xa8,v)) < 0)
-		return ret;
-
-/* Polling method: Wait until the AP finishes processing the HAB request */
-	t = jiffies + 1*HZ;
-	while (time_before(jiffies, t)) {
-		deb_info("waiting for HAB to complete\n");
-		msleep(10);
-		if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
-			return ret;
-
-		if (!v.HABSTAT_a8.HABR)
-			return 0;
-	}
-
-	deb_info("send_request execution timed out.\n");
-	return -ETIMEDOUT;
-}
-
-static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
-{
-	u8 ob[olen+2],ib[ilen+2];
-	int ret = 0;
-
-	ob[0] = cmd;
-	ob[1] = msgid;
-	memcpy(&ob[2],obuf,olen);
-
-	deb_hab("hab snd: ");
-	dbufout(ob,olen+2,deb_hab);
-	deb_hab("\n");
-
-	if (mutex_lock_interruptible(&st->hab_mutex) < 0)
-		return -EAGAIN;
-
-	if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
-		(ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0)
-		goto error;
-
-	deb_hab("hab get: ");
-	dbufout(ib,ilen+2,deb_hab);
-	deb_hab("\n");
-
-	memcpy(ibuf,&ib[2],ilen);
-error:
-	mutex_unlock(&st->hab_mutex);
-	return ret;
-}
-
-#if 0
-/* not needed, we use a semaphore to prevent HAB races */
-static int bcm3510_is_ap_ready(struct bcm3510_state *st)
-{
-	bcm3510_register_value ap,hab;
-	int ret;
-
-	if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 ||
-		(ret = bcm3510_readB(st,0xa2,&ap) < 0))
-		return ret;
-
-	if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) {
-		deb_info("AP is busy\n");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-#endif
-
-static int bcm3510_bert_reset(struct bcm3510_state *st)
-{
-	bcm3510_register_value b;
-	int ret;
-
-	if ((ret = bcm3510_readB(st,0xfa,&b)) < 0)
-		return ret;
-
-	b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
-	b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b);
-	b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
-	b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b);
-
-	/* clear residual bit counter TODO  */
-	return 0;
-}
-
-static int bcm3510_refresh_state(struct bcm3510_state *st)
-{
-	if (time_after(jiffies,st->next_status_check)) {
-		bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1));
-		bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2));
-		st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
-	}
-	return 0;
-}
-
-static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-
-	*status = 0;
-	if (st->status1.STATUS1.RECEIVER_LOCK)
-		*status |= FE_HAS_LOCK | FE_HAS_SYNC;
-
-	if (st->status1.STATUS1.FEC_LOCK)
-		*status |= FE_HAS_VITERBI;
-
-	if (st->status1.STATUS1.OUT_PLL_LOCK)
-		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
-
-	if (*status & FE_HAS_LOCK)
-		st->status_check_interval = 1500;
-	else /* more frequently checks if no lock has been achieved yet */
-		st->status_check_interval = 500;
-
-	deb_info("real_status: %02x\n",*status);
-	return 0;
-}
-
-static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-
-	*ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2;
-	return 0;
-}
-
-static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-	*unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1;
-	return 0;
-}
-
-static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	s32 t;
-
-	bcm3510_refresh_state(st);
-	t = st->status2.SIGNAL;
-
-	if (t > 190)
-		t = 190;
-	if (t < 90)
-		t = 90;
-
-	t -= 90;
-	t = t * 0xff / 100;
-	/* normalize if necessary */
-	*strength = (t << 8) | t;
-	return 0;
-}
-
-static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_refresh_state(st);
-
-	*snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8);
-	return 0;
-}
-
-/* tuner frontend programming */
-static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
-{
-	struct bcm3510_hab_cmd_tune c;
-	memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune));
-
-/* I2C Mode disabled,  set 16 control / Data pairs */
-	c.length = 0x10;
-	c.clock_width = 0;
-/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to
- * logic high (as Configuration) */
-	c.misc = 0x10;
-/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
-	c.TUNCTL_state = 0x40;
-
-/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
-	c.ctl_dat[0].ctrl.size = BITS_8;
-	c.ctl_dat[0].data      = 0x80 | bc;
-
-/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */
-	c.ctl_dat[1].ctrl.size = BITS_8;
-	c.ctl_dat[1].data      = 4;
-
-/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */
-	c.ctl_dat[2].ctrl.size = BITS_3;
-	c.ctl_dat[2].data      = 0x20;
-
-/* control CS0 pin, pulse byte ? */
-	c.ctl_dat[3].ctrl.size = BITS_3;
-	c.ctl_dat[3].ctrl.clk_off = 1;
-	c.ctl_dat[3].ctrl.cs0  = 1;
-	c.ctl_dat[3].data      = 0x40;
-
-/* PGM_S18 to PGM_S11 */
-	c.ctl_dat[4].ctrl.size = BITS_8;
-	c.ctl_dat[4].data      = n >> 3;
-
-/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */
-	c.ctl_dat[5].ctrl.size = BITS_8;
-	c.ctl_dat[5].data      = ((n & 0x7) << 5) | (a >> 2);
-
-/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */
-	c.ctl_dat[6].ctrl.size = BITS_3;
-	c.ctl_dat[6].data      = (a << 6) & 0xdf;
-
-/* control CS0 pin, pulse byte ? */
-	c.ctl_dat[7].ctrl.size = BITS_3;
-	c.ctl_dat[7].ctrl.clk_off = 1;
-	c.ctl_dat[7].ctrl.cs0  = 1;
-	c.ctl_dat[7].data      = 0x40;
-
-/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
-	c.ctl_dat[8].ctrl.size = BITS_8;
-	c.ctl_dat[8].data      = 0x80;
-
-/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */
-	c.ctl_dat[9].ctrl.size = BITS_8;
-	c.ctl_dat[9].data      = 0x10;
-
-/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */
-	c.ctl_dat[10].ctrl.size = BITS_3;
-	c.ctl_dat[10].data      = 0x20;
-
-/* pulse byte */
-	c.ctl_dat[11].ctrl.size = BITS_3;
-	c.ctl_dat[11].ctrl.clk_off = 1;
-	c.ctl_dat[11].ctrl.cs1  = 1;
-	c.ctl_dat[11].data      = 0x40;
-
-/* PGM_S18 to PGM_S11 */
-	c.ctl_dat[12].ctrl.size = BITS_8;
-	c.ctl_dat[12].data      = 0x2a;
-
-/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */
-	c.ctl_dat[13].ctrl.size = BITS_8;
-	c.ctl_dat[13].data      = 0x8e;
-
-/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */
-	c.ctl_dat[14].ctrl.size = BITS_3;
-	c.ctl_dat[14].data      = 0;
-
-/* Pulse Byte */
-	c.ctl_dat[15].ctrl.size = BITS_3;
-	c.ctl_dat[15].ctrl.clk_off = 1;
-	c.ctl_dat[15].ctrl.cs1  = 1;
-	c.ctl_dat[15].data      = 0x40;
-
-	return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0);
-}
-
-static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
-{
-	u8 bc,a;
-	u16 n;
-	s32 YIntercept,Tfvco1;
-
-	freq /= 1000;
-
-	deb_info("%dkHz:",freq);
-	/* set Band Switch */
-	if (freq <= 168000)
-		bc = 0x1c;
-	else if (freq <= 378000)
-		bc = 0x2c;
-	else
-		bc = 0x30;
-
-	if (freq >= 470000) {
-		freq -= 470001;
-		YIntercept = 18805;
-	} else if (freq >= 90000) {
-		freq -= 90001;
-		YIntercept = 15005;
-	} else if (freq >= 76000){
-		freq -= 76001;
-		YIntercept = 14865;
-	} else {
-		freq -= 54001;
-		YIntercept = 14645;
-	}
-
-	Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10;
-
-	n = Tfvco1 >> 6;
-	a = Tfvco1 & 0x3f;
-
-	deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a);
-	if (n >= 16 && n <= 2047)
-		return bcm3510_tuner_cmd(st,bc,n,a);
-
-	return -EINVAL;
-}
-
-static int bcm3510_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
-	struct bcm3510_state* st = fe->demodulator_priv;
-	struct bcm3510_hab_cmd_ext_acquire cmd;
-	struct bcm3510_hab_cmd_bert_control bert;
-	int ret;
-
-	memset(&cmd,0,sizeof(cmd));
-	switch (c->modulation) {
-		case QAM_256:
-			cmd.ACQUIRE0.MODE = 0x1;
-			cmd.ACQUIRE1.SYM_RATE = 0x1;
-			cmd.ACQUIRE1.IF_FREQ = 0x1;
-			break;
-		case QAM_64:
-			cmd.ACQUIRE0.MODE = 0x2;
-			cmd.ACQUIRE1.SYM_RATE = 0x2;
-			cmd.ACQUIRE1.IF_FREQ = 0x1;
-			break;
-#if 0
-		case QAM_256:
-			cmd.ACQUIRE0.MODE = 0x3;
-			break;
-		case QAM_128:
-			cmd.ACQUIRE0.MODE = 0x4;
-			break;
-		case QAM_64:
-			cmd.ACQUIRE0.MODE = 0x5;
-			break;
-		case QAM_32:
-			cmd.ACQUIRE0.MODE = 0x6;
-			break;
-		case QAM_16:
-			cmd.ACQUIRE0.MODE = 0x7;
-			break;
-#endif
-		case VSB_8:
-			cmd.ACQUIRE0.MODE = 0x8;
-			cmd.ACQUIRE1.SYM_RATE = 0x0;
-			cmd.ACQUIRE1.IF_FREQ = 0x0;
-			break;
-		case VSB_16:
-			cmd.ACQUIRE0.MODE = 0x9;
-			cmd.ACQUIRE1.SYM_RATE = 0x0;
-			cmd.ACQUIRE1.IF_FREQ = 0x0;
-		default:
-			return -EINVAL;
-	};
-	cmd.ACQUIRE0.OFFSET = 0;
-	cmd.ACQUIRE0.NTSCSWEEP = 1;
-	cmd.ACQUIRE0.FA = 1;
-	cmd.ACQUIRE0.BW = 0;
-
-/*	if (enableOffset) {
-		cmd.IF_OFFSET0 = xx;
-		cmd.IF_OFFSET1 = xx;
-
-		cmd.SYM_OFFSET0 = xx;
-		cmd.SYM_OFFSET1 = xx;
-		if (enableNtscSweep) {
-			cmd.NTSC_OFFSET0;
-			cmd.NTSC_OFFSET1;
-		}
-	} */
-	bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0);
-
-/* doing it with different MSGIDs, data book and source differs */
-	bert.BE = 0;
-	bert.unused = 0;
-	bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0);
-	bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0);
-
-	bcm3510_bert_reset(st);
-
-	ret = bcm3510_set_freq(st, c->frequency);
-	if (ret < 0)
-		return ret;
-
-	memset(&st->status1,0,sizeof(st->status1));
-	memset(&st->status2,0,sizeof(st->status2));
-	st->status_check_interval = 500;
-
-/* Give the AP some time */
-	msleep(200);
-
-	return 0;
-}
-
-static int bcm3510_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s)
-{
-	s->min_delay_ms = 1000;
-	s->step_size = 0;
-	s->max_drift = 0;
-	return 0;
-}
-
-static void bcm3510_release(struct dvb_frontend* fe)
-{
-	struct bcm3510_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-/* firmware download:
- * firmware file is build up like this:
- * 16bit addr, 16bit length, 8byte of length
- */
-#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw"
-
-static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, const u8 *b,
-			     u16 len)
-{
-	int ret = 0,i;
-	bcm3510_register_value vH, vL,vD;
-
-	vH.MADRH_a9 = addr >> 8;
-	vL.MADRL_aa = addr;
-	if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret;
-	if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret;
-
-	for (i = 0; i < len; i++) {
-		vD.MDATA_ab = b[i];
-		if ((ret = bcm3510_writeB(st,0xab,vD)) < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int bcm3510_download_firmware(struct dvb_frontend* fe)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	const struct firmware *fw;
-	u16 addr,len;
-	const u8 *b;
-	int ret,i;
-
-	deb_info("requesting firmware\n");
-	if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) {
-		err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret);
-		return ret;
-	}
-	deb_info("got firmware: %zd\n",fw->size);
-
-	b = fw->data;
-	for (i = 0; i < fw->size;) {
-		addr = le16_to_cpu( *( (u16 *)&b[i] ) );
-		len  = le16_to_cpu( *( (u16 *)&b[i+2] ) );
-		deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
-		if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
-			err("firmware download failed: %d\n",ret);
-			return ret;
-		}
-		i += 4 + len;
-	}
-	release_firmware(fw);
-	deb_info("firmware download successfully completed\n");
-	return 0;
-}
-
-static int bcm3510_check_firmware_version(struct bcm3510_state *st)
-{
-	struct bcm3510_hab_cmd_get_version_info ver;
-	bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver));
-
-	deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n",
-		ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version);
-
-	if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION &&
-		ver.config_version == BCM3510_DEF_CONFIG_VERSION &&
-		ver.demod_version  == BCM3510_DEF_DEMOD_VERSION)
-		return 0;
-
-	deb_info("version check failed\n");
-	return -ENODEV;
-}
-
-/* (un)resetting the AP */
-static int bcm3510_reset(struct bcm3510_state *st)
-{
-	int ret;
-	unsigned long  t;
-	bcm3510_register_value v;
-
-	bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1;
-	if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
-		return ret;
-
-    t = jiffies + 3*HZ;
-	while (time_before(jiffies, t)) {
-		msleep(10);
-		if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
-			return ret;
-
-		if (v.APSTAT1_a2.RESET)
-			return 0;
-	}
-	deb_info("reset timed out\n");
-	return -ETIMEDOUT;
-}
-
-static int bcm3510_clear_reset(struct bcm3510_state *st)
-{
-	bcm3510_register_value v;
-	int ret;
-	unsigned long t;
-
-	v.raw = 0;
-	if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
-		return ret;
-
-    t = jiffies + 3*HZ;
-	while (time_before(jiffies, t)) {
-		msleep(10);
-		if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
-			return ret;
-
-		/* verify that reset is cleared */
-		if (!v.APSTAT1_a2.RESET)
-			return 0;
-	}
-	deb_info("reset clear timed out\n");
-	return -ETIMEDOUT;
-}
-
-static int bcm3510_init_cold(struct bcm3510_state *st)
-{
-	int ret;
-	bcm3510_register_value v;
-
-	/* read Acquisation Processor status register and check it is not in RUN mode */
-	if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
-		return ret;
-	if (v.APSTAT1_a2.RUN) {
-		deb_info("AP is already running - firmware already loaded.\n");
-		return 0;
-	}
-
-	deb_info("reset?\n");
-	if ((ret = bcm3510_reset(st)) < 0)
-		return ret;
-
-	deb_info("tristate?\n");
-	/* tri-state */
-	v.TSTCTL_2e.CTL = 0;
-	if ((ret = bcm3510_writeB(st,0x2e,v)) < 0)
-		return ret;
-
-	deb_info("firmware?\n");
-	if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 ||
-		(ret = bcm3510_clear_reset(st)) < 0)
-		return ret;
-
-	/* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */
-
-	return 0;
-}
-
-static int bcm3510_init(struct dvb_frontend* fe)
-{
-	struct bcm3510_state* st = fe->demodulator_priv;
-	bcm3510_register_value j;
-	struct bcm3510_hab_cmd_set_agc c;
-	int ret;
-
-	if ((ret = bcm3510_readB(st,0xca,&j)) < 0)
-		return ret;
-
-	deb_info("JDEC: %02x\n",j.raw);
-
-	switch (j.JDEC_ca.JDEC) {
-		case JDEC_WAIT_AT_RAM:
-			deb_info("attempting to download firmware\n");
-			if ((ret = bcm3510_init_cold(st)) < 0)
-				return ret;
-		case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */
-			deb_info("firmware is loaded\n");
-			bcm3510_check_firmware_version(st);
-			break;
-		default:
-			return -ENODEV;
-	}
-
-	memset(&c,0,1);
-	c.SEL = 1;
-	bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0);
-
-	return 0;
-}
-
-
-static struct dvb_frontend_ops bcm3510_ops;
-
-struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
-				   struct i2c_adapter *i2c)
-{
-	struct bcm3510_state* state = NULL;
-	int ret;
-	bcm3510_register_value v;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct bcm3510_state), GFP_KERNEL);
-	if (state == NULL)
-		goto error;
-
-	/* setup the state */
-
-	state->config = config;
-	state->i2c = i2c;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-
-	mutex_init(&state->hab_mutex);
-
-	if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
-		goto error;
-
-	deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER);
-
-	if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */
-		(v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0))   /* warm */
-		goto error;
-
-	info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER);
-
-	bcm3510_reset(state);
-
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-EXPORT_SYMBOL(bcm3510_attach);
-
-static struct dvb_frontend_ops bcm3510_ops = {
-	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
-	.info = {
-		.name = "Broadcom BCM3510 VSB/QAM frontend",
-		.frequency_min =  54000000,
-		.frequency_max = 803000000,
-		/* stepsize is just a guess */
-		.frequency_stepsize = 0,
-		.caps =
-			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_8VSB | FE_CAN_16VSB |
-			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256
-	},
-
-	.release = bcm3510_release,
-
-	.init = bcm3510_init,
-	.sleep = bcm3510_sleep,
-
-	.set_frontend = bcm3510_set_frontend,
-	.get_tune_settings = bcm3510_get_tune_settings,
-
-	.read_status = bcm3510_read_status,
-	.read_ber = bcm3510_read_ber,
-	.read_signal_strength = bcm3510_read_signal_strength,
-	.read_snr = bcm3510_read_snr,
-	.read_ucblocks = bcm3510_read_unc,
-};
-
-MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_LICENSE("GPL");