MD: Move macros from raid1*.h to raid1*.c

MD RAID1/RAID10: Move some macros from .h file to .c file

There are three macros (IO_BLOCKED,IO_MADE_GOOD,BIO_SPECIAL) which are defined
in both raid1.h and raid10.h.  They are only used in there respective .c files.
However, if we wish to make RAID10 accessible to the device-mapper RAID
target (dm-raid.c), then we need to move these macros into the .c files where
they are used so that they do not conflict with each other.

The macros from the two files are identical and could be moved into md.h, but
I chose to leave the duplication and have them remain in the personality
files.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>

4 files changed, 29 insertions, 29 deletions

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 57d6abd497ef..d3d3568b4fb1 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -46,6 +46,20 @@
  */
 #define	NR_RAID1_BIOS 256
 
+/* when we get a read error on a read-only array, we redirect to another
+ * device without failing the first device, or trying to over-write to
+ * correct the read error.  To keep track of bad blocks on a per-bio
+ * level, we store IO_BLOCKED in the appropriate 'bios' pointer
+ */
+#define IO_BLOCKED ((struct bio *)1)
+/* When we successfully write to a known bad-block, we need to remove the
+ * bad-block marking which must be done from process context.  So we record
+ * the success by setting devs[n].bio to IO_MADE_GOOD
+ */
+#define IO_MADE_GOOD ((struct bio *)2)
+
+#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
+
 /* When there are this many requests queue to be written by
  * the raid1 thread, we become 'congested' to provide back-pressure
  * for writeback.
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 6b49336575fe..4e3613daaea2 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -135,20 +135,6 @@ struct r1bio {
 	/* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
 };
 
-/* when we get a read error on a read-only array, we redirect to another
- * device without failing the first device, or trying to over-write to
- * correct the read error.  To keep track of bad blocks on a per-bio
- * level, we store IO_BLOCKED in the appropriate 'bios' pointer
- */
-#define IO_BLOCKED ((struct bio *)1)
-/* When we successfully write to a known bad-block, we need to remove the
- * bad-block marking which must be done from process context.  So we record
- * the success by setting bios[n] to IO_MADE_GOOD
- */
-#define IO_MADE_GOOD ((struct bio *)2)
-
-#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
-
 /* bits for r1bio.state */
 #define	R1BIO_Uptodate	0
 #define	R1BIO_IsSync	1
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index f9c4baa7964d..e77acf024055 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -60,7 +60,21 @@
  */
 #define	NR_RAID10_BIOS 256
 
-/* When there are this many requests queue to be written by
+/* when we get a read error on a read-only array, we redirect to another
+ * device without failing the first device, or trying to over-write to
+ * correct the read error.  To keep track of bad blocks on a per-bio
+ * level, we store IO_BLOCKED in the appropriate 'bios' pointer
+ */
+#define IO_BLOCKED ((struct bio *)1)
+/* When we successfully write to a known bad-block, we need to remove the
+ * bad-block marking which must be done from process context.  So we record
+ * the success by setting devs[n].bio to IO_MADE_GOOD
+ */
+#define IO_MADE_GOOD ((struct bio *)2)
+
+#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
+
+/* When there are this many requests queued to be written by
  * the raid10 thread, we become 'congested' to provide back-pressure
  * for writeback.
  */
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index ecdb440b003a..b0a435869dca 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -123,20 +123,6 @@ struct r10bio {
 	} devs[0];
 };
 
-/* when we get a read error on a read-only array, we redirect to another
- * device without failing the first device, or trying to over-write to
- * correct the read error.  To keep track of bad blocks on a per-bio
- * level, we store IO_BLOCKED in the appropriate 'bios' pointer
- */
-#define IO_BLOCKED ((struct bio*)1)
-/* When we successfully write to a known bad-block, we need to remove the
- * bad-block marking which must be done from process context.  So we record
- * the success by setting devs[n].bio to IO_MADE_GOOD
- */
-#define IO_MADE_GOOD ((struct bio *)2)
-
-#define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
-
 /* bits for r10bio.state */
 enum r10bio_state {
 	R10BIO_Uptodate,