iommu/vt-d: Convert IR ioapic-setup to use remap_ops

The IOAPIC setup routine for interrupt remapping is VT-d
specific. Move it to the irq_remap_ops and add a call helper
function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

3 files changed, 109 insertions, 0 deletions

diff --git a/drivers/iommu/intel_intr_remapping.c b/drivers/iommu/intel_intr_remapping.c
index 610b75b66c07..f495eba4b6ab 100644
--- a/drivers/iommu/intel_intr_remapping.c
+++ b/drivers/iommu/intel_intr_remapping.c
@@ -31,6 +31,7 @@ struct hpet_scope {
 };
 
 #define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
+#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
 
 static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
 static struct hpet_scope ir_hpet[MAX_HPET_TBS];
@@ -814,6 +815,93 @@ error:
 	return -1;
 }
 
+static void prepare_irte(struct irte *irte, int vector,
+			 unsigned int dest)
+{
+	memset(irte, 0, sizeof(*irte));
+
+	irte->present = 1;
+	irte->dst_mode = apic->irq_dest_mode;
+	/*
+	 * Trigger mode in the IRTE will always be edge, and for IO-APIC, the
+	 * actual level or edge trigger will be setup in the IO-APIC
+	 * RTE. This will help simplify level triggered irq migration.
+	 * For more details, see the comments (in io_apic.c) explainig IO-APIC
+	 * irq migration in the presence of interrupt-remapping.
+	*/
+	irte->trigger_mode = 0;
+	irte->dlvry_mode = apic->irq_delivery_mode;
+	irte->vector = vector;
+	irte->dest_id = IRTE_DEST(dest);
+	irte->redir_hint = 1;
+}
+
+static int intel_setup_ioapic_entry(int irq,
+				    struct IO_APIC_route_entry *route_entry,
+				    unsigned int destination, int vector,
+				    struct io_apic_irq_attr *attr)
+{
+	int ioapic_id = mpc_ioapic_id(attr->ioapic);
+	struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
+	struct IR_IO_APIC_route_entry *entry;
+	struct irte irte;
+	int index;
+
+	if (!iommu) {
+		pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
+		return -ENODEV;
+	}
+
+	entry = (struct IR_IO_APIC_route_entry *)route_entry;
+
+	index = alloc_irte(iommu, irq, 1);
+	if (index < 0) {
+		pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
+		return -ENOMEM;
+	}
+
+	prepare_irte(&irte, vector, destination);
+
+	/* Set source-id of interrupt request */
+	set_ioapic_sid(&irte, ioapic_id);
+
+	modify_irte(irq, &irte);
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
+		"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
+		"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
+		"Avail:%X Vector:%02X Dest:%08X "
+		"SID:%04X SQ:%X SVT:%X)\n",
+		attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
+		irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
+		irte.avail, irte.vector, irte.dest_id,
+		irte.sid, irte.sq, irte.svt);
+
+	memset(entry, 0, sizeof(*entry));
+
+	entry->index2	= (index >> 15) & 0x1;
+	entry->zero	= 0;
+	entry->format	= 1;
+	entry->index	= (index & 0x7fff);
+	/*
+	 * IO-APIC RTE will be configured with virtual vector.
+	 * irq handler will do the explicit EOI to the io-apic.
+	 */
+	entry->vector	= attr->ioapic_pin;
+	entry->mask	= 0;			/* enable IRQ */
+	entry->trigger	= attr->trigger;
+	entry->polarity	= attr->polarity;
+
+	/* Mask level triggered irqs.
+	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+	 */
+	if (attr->trigger)
+		entry->mask = 1;
+
+	return 0;
+}
+
+
 struct irq_remap_ops intel_irq_remap_ops = {
 	.supported		= intel_intr_remapping_supported,
 	.hardware_init		= dmar_table_init,
@@ -821,4 +909,5 @@ struct irq_remap_ops intel_irq_remap_ops = {
 	.hardware_disable	= disable_intr_remapping,
 	.hardware_reenable	= reenable_intr_remapping,
 	.enable_faulting	= enable_drhd_fault_handling,
+	.setup_ioapic_entry	= intel_setup_ioapic_entry,
 };
diff --git a/drivers/iommu/intr_remapping.c b/drivers/iommu/intr_remapping.c
index 9aabed7c0320..739148ab2538 100644
--- a/drivers/iommu/intr_remapping.c
+++ b/drivers/iommu/intr_remapping.c
@@ -98,3 +98,15 @@ int __init intr_enable_fault_handling(void)
 
 	return remap_ops->enable_faulting();
 }
+
+int intr_setup_ioapic_entry(int irq,
+			    struct IO_APIC_route_entry *entry,
+			    unsigned int destination, int vector,
+			    struct io_apic_irq_attr *attr)
+{
+	if (!remap_ops || !remap_ops->setup_ioapic_entry)
+		return -ENODEV;
+
+	return remap_ops->setup_ioapic_entry(irq, entry, destination,
+					     vector, attr);
+}
diff --git a/drivers/iommu/intr_remapping.h b/drivers/iommu/intr_remapping.h
index 2744c9ae4aec..e8994f2b3bbe 100644
--- a/drivers/iommu/intr_remapping.h
+++ b/drivers/iommu/intr_remapping.h
@@ -24,6 +24,9 @@
 
 #ifdef CONFIG_IRQ_REMAP
 
+struct IO_APIC_route_entry;
+struct io_apic_irq_attr;
+
 extern int disable_intremap;
 extern int disable_sourceid_checking;
 extern int no_x2apic_optout;
@@ -46,6 +49,11 @@ struct irq_remap_ops {
 
 	/* Enable fault handling */
 	int  (*enable_faulting)(void);
+
+	/* IO-APIC setup routine */
+	int (*setup_ioapic_entry)(int irq, struct IO_APIC_route_entry *,
+				  unsigned int, int,
+				  struct io_apic_irq_attr *);
 };
 
 extern struct irq_remap_ops intel_irq_remap_ops;