Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver

The kernel does not contain the symbol SA1100_BITSY so the driver
is never compiled and can be removed safely.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

3 files changed, 0 insertions, 492 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index f7668b24c378..b93b5988ace8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -111,18 +111,6 @@ config TOUCHSCREEN_AUO_PIXCIR
 	  To compile this driver as a module, choose M here: the
 	  module will be called auo-pixcir-ts.
 
-config TOUCHSCREEN_BITSY
-	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
-	depends on SA1100_BITSY
-	select SERIO
-	help
-	  Say Y here if you have the h3600 (Bitsy) touchscreen.
-
-	  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called h3600_ts_input.
-
 config TOUCHSCREEN_BU21013
 	tristate "BU21013 based touch panel controllers"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 178eb128d90f..5f949c0bf82f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
-obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
deleted file mode 100644
index b9e8686a6f1c..000000000000
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- *  Copyright (c) 2001 "Crazy" James Simmons jsimmons@transvirtual.com
- *
- *  Sponsored by Transvirtual Technology.
- *
- *  Derived from the code in h3600_ts.[ch] by Charles Flynn
- */
-
-/*
- * Driver for the h3600 Touch Screen and other Atmel controlled devices.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so by
- * e-mail - mail your message to <jsimmons@transvirtual.com>.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/serio.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-/* SA1100 serial defines */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#define DRIVER_DESC	"H3600 touchscreen driver"
-
-MODULE_AUTHOR("James Simmons <jsimmons@transvirtual.com>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-/*
- * Definitions & global arrays.
- */
-
-/* The start and end of frame characters SOF and EOF */
-#define CHAR_SOF                0x02
-#define CHAR_EOF                0x03
-#define FRAME_OVERHEAD          3       /* CHAR_SOF,CHAR_EOF,LENGTH = 3 */
-
-/*
-        Atmel events and response IDs contained in frame.
-        Programmer has no control over these numbers.
-        TODO there are holes - specifically  1,7,0x0a
-*/
-#define VERSION_ID              0       /* Get Version (request/response) */
-#define KEYBD_ID                2       /* Keyboard (event) */
-#define TOUCHS_ID               3       /* Touch Screen (event)*/
-#define EEPROM_READ_ID          4       /* (request/response) */
-#define EEPROM_WRITE_ID         5       /* (request/response) */
-#define THERMAL_ID              6       /* (request/response) */
-#define NOTIFY_LED_ID           8       /* (request/response) */
-#define BATTERY_ID              9       /* (request/response) */
-#define SPI_READ_ID             0x0b    /* ( request/response) */
-#define SPI_WRITE_ID            0x0c    /* ( request/response) */
-#define FLITE_ID                0x0d    /* backlight ( request/response) */
-#define STX_ID                  0xa1    /* extension pack status (req/resp) */
-
-#define MAX_ID                  14
-
-#define H3600_MAX_LENGTH 16
-#define H3600_KEY 0xf
-
-#define H3600_SCANCODE_RECORD	1	 /* 1 -> record button */
-#define H3600_SCANCODE_CALENDAR 2	 /* 2 -> calendar */
-#define H3600_SCANCODE_CONTACTS 3	 /* 3 -> contact */
-#define H3600_SCANCODE_Q	4	 /* 4 -> Q button */
-#define	H3600_SCANCODE_START	5	 /* 5 -> start menu */
-#define	H3600_SCANCODE_UP	6	 /* 6 -> up */
-#define H3600_SCANCODE_RIGHT	7	 /* 7 -> right */
-#define H3600_SCANCODE_LEFT	8	 /* 8 -> left */
-#define H3600_SCANCODE_DOWN	9	 /* 9 -> down */
-
-/*
- * Per-touchscreen data.
- */
-struct h3600_dev {
-	struct input_dev *dev;
-	struct serio *serio;
-	unsigned char event;	/* event ID from packet */
-	unsigned char chksum;
-	unsigned char len;
-	unsigned char idx;
-	unsigned char buf[H3600_MAX_LENGTH];
-	char phys[32];
-};
-
-static irqreturn_t action_button_handler(int irq, void *dev_id)
-{
-	int down = (GPLR & GPIO_BITSY_ACTION_BUTTON) ? 0 : 1;
-	struct input_dev *dev = dev_id;
-
-	input_report_key(dev, KEY_ENTER, down);
-	input_sync(dev);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t npower_button_handler(int irq, void *dev_id)
-{
-	int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1;
-	struct input_dev *dev = dev_id;
-
-	/*
-	 * This interrupt is only called when we release the key. So we have
-	 * to fake a key press.
-	 */
-	input_report_key(dev, KEY_SUSPEND, 1);
-	input_report_key(dev, KEY_SUSPEND, down);
-	input_sync(dev);
-
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_PM
-
-static int flite_brightness = 25;
-
-enum flite_pwr {
-	FLITE_PWR_OFF = 0,
-	FLITE_PWR_ON = 1
-};
-
-/*
- * h3600_flite_power: enables or disables power to frontlight, using last bright */
-unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr)
-{
-	unsigned char brightness = (pwr == FLITE_PWR_OFF) ? 0 : flite_brightness;
-	struct h3600_dev *ts = input_get_drvdata(dev);
-
-	/* Must be in this order */
-	serio_write(ts->serio, 1);
-	serio_write(ts->serio, pwr);
-	serio_write(ts->serio, brightness);
-
-	return 0;
-}
-
-#endif
-
-/*
- * This function translates the native event packets to linux input event
- * packets. Some packets coming from serial are not touchscreen related. In
- * this case we send them off to be processed elsewhere.
- */
-static void h3600ts_process_packet(struct h3600_dev *ts)
-{
-	struct input_dev *dev = ts->dev;
-	static int touched = 0;
-	int key, down = 0;
-
-	switch (ts->event) {
-		/*
-		   Buttons - returned as a single byte
-			7 6 5 4 3 2 1 0
-			S x x x N N N N
-
-		   S       switch state ( 0=pressed 1=released)
-		   x       Unused.
-		   NNNN    switch number 0-15
-
-		   Note: This is true for non interrupt generated key events.
-		*/
-		case KEYBD_ID:
-			down = (ts->buf[0] & 0x80) ? 0 : 1;
-
-			switch (ts->buf[0] & 0x7f) {
-				case H3600_SCANCODE_RECORD:
-					key = KEY_RECORD;
-					break;
-				case H3600_SCANCODE_CALENDAR:
-					key = KEY_PROG1;
-                                        break;
-				case H3600_SCANCODE_CONTACTS:
-					key = KEY_PROG2;
-					break;
-				case H3600_SCANCODE_Q:
-					key = KEY_Q;
-					break;
-				case H3600_SCANCODE_START:
-					key = KEY_PROG3;
-					break;
-				case H3600_SCANCODE_UP:
-					key = KEY_UP;
-					break;
-				case H3600_SCANCODE_RIGHT:
-					key = KEY_RIGHT;
-					break;
-				case H3600_SCANCODE_LEFT:
-					key = KEY_LEFT;
-					break;
-				case H3600_SCANCODE_DOWN:
-					key = KEY_DOWN;
-					break;
-				default:
-					key = 0;
-			}
-			if (key)
-				input_report_key(dev, key, down);
-			break;
-		/*
-		 * Native touchscreen event data is formatted as shown below:-
-		 *
-		 *      +-------+-------+-------+-------+
-		 *      | Xmsb  | Xlsb  | Ymsb  | Ylsb  |
-		 *      +-------+-------+-------+-------+
-		 *       byte 0    1       2       3
-		 */
-		case TOUCHS_ID:
-			if (!touched) {
-				input_report_key(dev, BTN_TOUCH, 1);
-				touched = 1;
-			}
-
-			if (ts->len) {
-				unsigned short x, y;
-
-				x = ts->buf[0]; x <<= 8; x += ts->buf[1];
-				y = ts->buf[2]; y <<= 8; y += ts->buf[3];
-
-				input_report_abs(dev, ABS_X, x);
-				input_report_abs(dev, ABS_Y, y);
-			} else {
-				input_report_key(dev, BTN_TOUCH, 0);
-				touched = 0;
-			}
-			break;
-		default:
-			/* Send a non input event elsewhere */
-			break;
-	}
-
-	input_sync(dev);
-}
-
-/*
- * h3600ts_event() handles events from the input module.
- */
-static int h3600ts_event(struct input_dev *dev, unsigned int type,
-			 unsigned int code, int value)
-{
-#if 0
-	struct h3600_dev *ts = input_get_drvdata(dev);
-
-	switch (type) {
-		case EV_LED: {
-		//	serio_write(ts->serio, SOME_CMD);
-			return 0;
-		}
-	}
-	return -1;
-#endif
-	return 0;
-}
-
-/*
-        Frame format
-  byte    1       2               3              len + 4
-        +-------+---------------+---------------+--=------------+
-        |SOF    |id     |len    | len bytes     | Chksum        |
-        +-------+---------------+---------------+--=------------+
-  bit   0     7  8    11 12   15 16
-
-        +-------+---------------+-------+
-        |SOF    |id     |0      |Chksum | - Note Chksum does not include SOF
-        +-------+---------------+-------+
-  bit   0     7  8    11 12   15 16
-
-*/
-
-static int state;
-
-/* decode States  */
-#define STATE_SOF       0       /* start of FRAME */
-#define STATE_ID        1       /* state where we decode the ID & len */
-#define STATE_DATA      2       /* state where we decode data */
-#define STATE_EOF       3       /* state where we decode checksum or EOF */
-
-static irqreturn_t h3600ts_interrupt(struct serio *serio, unsigned char data,
-                                     unsigned int flags)
-{
-	struct h3600_dev *ts = serio_get_drvdata(serio);
-
-	/*
-	 * We have a new frame coming in.
-	 */
-	switch (state) {
-		case STATE_SOF:
-			if (data == CHAR_SOF)
-				state = STATE_ID;
-			break;
-		case STATE_ID:
-			ts->event = (data & 0xf0) >> 4;
-			ts->len = (data & 0xf);
-			ts->idx = 0;
-			if (ts->event >= MAX_ID) {
-				state = STATE_SOF;
-				break;
-			}
-			ts->chksum = data;
-			state = (ts->len > 0) ? STATE_DATA : STATE_EOF;
-			break;
-		case STATE_DATA:
-			ts->chksum += data;
-			ts->buf[ts->idx]= data;
-			if (++ts->idx == ts->len)
-				state = STATE_EOF;
-			break;
-		case STATE_EOF:
-			state = STATE_SOF;
-			if (data == CHAR_EOF || data == ts->chksum)
-				h3600ts_process_packet(ts);
-			break;
-		default:
-			printk("Error3\n");
-			break;
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * h3600ts_connect() is the routine that is called when someone adds a
- * new serio device that supports H3600 protocol and registers it as
- * an input device.
- */
-static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
-{
-	struct h3600_dev *ts;
-	struct input_dev *input_dev;
-	int err;
-
-	ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts || !input_dev) {
-		err = -ENOMEM;
-		goto fail1;
-	}
-
-	ts->serio = serio;
-	ts->dev = input_dev;
-	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", serio->phys);
-
-	input_dev->name = "H3600 TouchScreen";
-	input_dev->phys = ts->phys;
-	input_dev->id.bustype = BUS_RS232;
-	input_dev->id.vendor = SERIO_H3600;
-	input_dev->id.product = 0x0666;  /* FIXME !!! We can ask the hardware */
-	input_dev->id.version = 0x0100;
-	input_dev->dev.parent = &serio->dev;
-
-	input_set_drvdata(input_dev, ts);
-
-	input_dev->event = h3600ts_event;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
-		BIT_MASK(EV_LED) | BIT_MASK(EV_PWR);
-	input_dev->ledbit[0] = BIT_MASK(LED_SLEEP);
-	input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0);
-
-	set_bit(KEY_RECORD, input_dev->keybit);
-	set_bit(KEY_Q, input_dev->keybit);
-	set_bit(KEY_PROG1, input_dev->keybit);
-	set_bit(KEY_PROG2, input_dev->keybit);
-	set_bit(KEY_PROG3, input_dev->keybit);
-	set_bit(KEY_UP, input_dev->keybit);
-	set_bit(KEY_RIGHT, input_dev->keybit);
-	set_bit(KEY_LEFT, input_dev->keybit);
-	set_bit(KEY_DOWN, input_dev->keybit);
-	set_bit(KEY_ENTER, input_dev->keybit);
-	set_bit(KEY_SUSPEND, input_dev->keybit);
-	set_bit(BTN_TOUCH, input_dev->keybit);
-
-	/* Device specific stuff */
-	set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES);
-	set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
-
-	if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
-			IRQF_SHARED, "h3600_action", ts->dev)) {
-		printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
-		err = -EBUSY;
-		goto fail1;
-	}
-
-	if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
-			IRQF_SHARED, "h3600_suspend", ts->dev)) {
-		printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
-		err = -EBUSY;
-		goto fail2;
-	}
-
-	serio_set_drvdata(serio, ts);
-
-	err = serio_open(serio, drv);
-	if (err)
-		goto fail3;
-
-	//h3600_flite_control(1, 25);     /* default brightness */
-	err = input_register_device(ts->dev);
-	if (err)
-		goto fail4;
-
-	return 0;
-
-fail4:	serio_close(serio);
-fail3:	serio_set_drvdata(serio, NULL);
-	free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
-fail2:	free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
-fail1:	input_free_device(input_dev);
-	kfree(ts);
-	return err;
-}
-
-/*
- * h3600ts_disconnect() is the opposite of h3600ts_connect()
- */
-
-static void h3600ts_disconnect(struct serio *serio)
-{
-	struct h3600_dev *ts = serio_get_drvdata(serio);
-
-	free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
-	free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
-	input_get_device(ts->dev);
-	input_unregister_device(ts->dev);
-	serio_close(serio);
-	serio_set_drvdata(serio, NULL);
-	input_put_device(ts->dev);
-	kfree(ts);
-}
-
-/*
- * The serio driver structure.
- */
-
-static struct serio_device_id h3600ts_serio_ids[] = {
-	{
-		.type	= SERIO_RS232,
-		.proto	= SERIO_H3600,
-		.id	= SERIO_ANY,
-		.extra	= SERIO_ANY,
-	},
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(serio, h3600ts_serio_ids);
-
-static struct serio_driver h3600ts_drv = {
-	.driver		= {
-		.name	= "h3600ts",
-	},
-	.description	= DRIVER_DESC,
-	.id_table	= h3600ts_serio_ids,
-	.interrupt	= h3600ts_interrupt,
-	.connect	= h3600ts_connect,
-	.disconnect	= h3600ts_disconnect,
-};
-
-module_serio_driver(h3600ts_drv);