Merge branch 'next' into for-linus

17 files changed, 399 insertions, 70 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 434fd800cd24..cabd9e54863f 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -248,6 +248,18 @@ config TOUCHSCREEN_LPC32XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called lpc32xx_ts.
 
+config TOUCHSCREEN_MAX11801
+	tristate "MAX11801 based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a MAX11801 based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max11801_ts.
+
 config TOUCHSCREEN_MCS5000
 	tristate "MELFAS MCS-5000 touchscreen"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index ca94098d4c92..282d6f76ae26 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 1de1c19dad30..5196861b86ef 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -109,6 +109,7 @@ struct ads7846 {
 	u16			pressure_max;
 
 	bool			swap_xy;
+	bool			use_internal;
 
 	struct ads7846_packet	*packet;
 
@@ -307,7 +308,6 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	struct ads7846 *ts = dev_get_drvdata(dev);
 	struct ser_req *req;
 	int status;
-	int use_internal;
 
 	req = kzalloc(sizeof *req, GFP_KERNEL);
 	if (!req)
@@ -315,11 +315,8 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 
 	spi_message_init(&req->msg);
 
-	/* FIXME boards with ads7846 might use external vref instead ... */
-	use_internal = (ts->model == 7846);
-
 	/* maybe turn on internal vREF, and let it settle */
-	if (use_internal) {
+	if (ts->use_internal) {
 		req->ref_on = REF_ON;
 		req->xfer[0].tx_buf = &req->ref_on;
 		req->xfer[0].len = 1;
@@ -331,8 +328,14 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 		/* for 1uF, settle for 800 usec; no cap, 100 usec.  */
 		req->xfer[1].delay_usecs = ts->vref_delay_usecs;
 		spi_message_add_tail(&req->xfer[1], &req->msg);
+
+		/* Enable reference voltage */
+		command |= ADS_PD10_REF_ON;
 	}
 
+	/* Enable ADC in every case */
+	command |= ADS_PD10_ADC_ON;
+
 	/* take sample */
 	req->command = (u8) command;
 	req->xfer[2].tx_buf = &req->command;
@@ -416,7 +419,7 @@ name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
 { \
 	struct ads7846 *ts = dev_get_drvdata(dev); \
 	ssize_t v = ads7846_read12_ser(dev, \
-			READ_12BIT_SER(var) | ADS_PD10_ALL_ON); \
+			READ_12BIT_SER(var)); \
 	if (v < 0) \
 		return v; \
 	return sprintf(buf, "%u\n", adjust(ts, v)); \
@@ -509,6 +512,7 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
 		if (!ts->vref_mv) {
 			dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
 			ts->vref_mv = 2500;
+			ts->use_internal = true;
 		}
 		break;
 	case 7845:
@@ -969,6 +973,13 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
 				pdata->gpio_pendown);
 			return err;
 		}
+		err = gpio_direction_input(pdata->gpio_pendown);
+		if (err) {
+			dev_err(&spi->dev, "failed to setup pendown GPIO%d\n",
+				pdata->gpio_pendown);
+			gpio_free(pdata->gpio_pendown);
+			return err;
+		}
 
 		ts->gpio_pendown = pdata->gpio_pendown;
 
@@ -1340,8 +1351,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	if (ts->model == 7845)
 		ads7845_read12_ser(&spi->dev, PWRDOWN);
 	else
-		(void) ads7846_read12_ser(&spi->dev,
-				READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+		(void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux));
 
 	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
 	if (err)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 4012436633b1..1e61387c73ca 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -17,7 +17,7 @@
 #include <linux/firmware.h>
 #include <linux/i2c.h>
 #include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
@@ -196,9 +196,12 @@
 #define MXT_PRESS		(1 << 6)
 #define MXT_DETECT		(1 << 7)
 
+/* Touch orient bits */
+#define MXT_XY_SWITCH		(1 << 0)
+#define MXT_X_INVERT		(1 << 1)
+#define MXT_Y_INVERT		(1 << 2)
+
 /* Touchscreen absolute values */
-#define MXT_MAX_XC		0x3ff
-#define MXT_MAX_YC		0x3ff
 #define MXT_MAX_AREA		0xff
 
 #define MXT_MAX_FINGER		10
@@ -246,6 +249,8 @@ struct mxt_data {
 	struct mxt_info info;
 	struct mxt_finger finger[MXT_MAX_FINGER];
 	unsigned int irq;
+	unsigned int max_x;
+	unsigned int max_y;
 };
 
 static bool mxt_object_readable(unsigned int type)
@@ -499,19 +504,21 @@ static void mxt_input_report(struct mxt_data *data, int single_id)
 		if (!finger[id].status)
 			continue;
 
-		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
-				finger[id].status != MXT_RELEASE ?
-				finger[id].area : 0);
-		input_report_abs(input_dev, ABS_MT_POSITION_X,
-				finger[id].x);
-		input_report_abs(input_dev, ABS_MT_POSITION_Y,
-				finger[id].y);
-		input_mt_sync(input_dev);
+		input_mt_slot(input_dev, id);
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+				finger[id].status != MXT_RELEASE);
 
-		if (finger[id].status == MXT_RELEASE)
-			finger[id].status = 0;
-		else
+		if (finger[id].status != MXT_RELEASE) {
 			finger_num++;
+			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+					finger[id].area);
+			input_report_abs(input_dev, ABS_MT_POSITION_X,
+					finger[id].x);
+			input_report_abs(input_dev, ABS_MT_POSITION_Y,
+					finger[id].y);
+		} else {
+			finger[id].status = 0;
+		}
 	}
 
 	input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
@@ -549,8 +556,13 @@ static void mxt_input_touchevent(struct mxt_data *data,
 	if (!(status & (MXT_PRESS | MXT_MOVE)))
 		return;
 
-	x = (message->message[1] << 2) | ((message->message[3] & ~0x3f) >> 6);
-	y = (message->message[2] << 2) | ((message->message[3] & ~0xf3) >> 2);
+	x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
+	y = (message->message[2] << 4) | ((message->message[3] & 0xf));
+	if (data->max_x < 1024)
+		x = x >> 2;
+	if (data->max_y < 1024)
+		y = y >> 2;
+
 	area = message->message[4];
 
 	dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
@@ -804,10 +816,6 @@ static int mxt_initialize(struct mxt_data *data)
 	if (error)
 		return error;
 
-	error = mxt_make_highchg(data);
-	if (error)
-		return error;
-
 	mxt_handle_pdata(data);
 
 	/* Backup to memory */
@@ -845,6 +853,20 @@ static int mxt_initialize(struct mxt_data *data)
 	return 0;
 }
 
+static void mxt_calc_resolution(struct mxt_data *data)
+{
+	unsigned int max_x = data->pdata->x_size - 1;
+	unsigned int max_y = data->pdata->y_size - 1;
+
+	if (data->pdata->orient & MXT_XY_SWITCH) {
+		data->max_x = max_y;
+		data->max_y = max_x;
+	} else {
+		data->max_x = max_x;
+		data->max_y = max_y;
+	}
+}
+
 static ssize_t mxt_object_show(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
@@ -981,6 +1003,10 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 
 	enable_irq(data->irq);
 
+	error = mxt_make_highchg(data);
+	if (error)
+		return error;
+
 	return count;
 }
 
@@ -1052,31 +1078,33 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	input_dev->open = mxt_input_open;
 	input_dev->close = mxt_input_close;
 
+	data->client = client;
+	data->input_dev = input_dev;
+	data->pdata = pdata;
+	data->irq = client->irq;
+
+	mxt_calc_resolution(data);
+
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 
 	/* For single touch */
 	input_set_abs_params(input_dev, ABS_X,
-			     0, MXT_MAX_XC, 0, 0);
+			     0, data->max_x, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y,
-			     0, MXT_MAX_YC, 0, 0);
+			     0, data->max_y, 0, 0);
 
 	/* For multi touch */
+	input_mt_init_slots(input_dev, MXT_MAX_FINGER);
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
 			     0, MXT_MAX_AREA, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-			     0, MXT_MAX_XC, 0, 0);
+			     0, data->max_x, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-			     0, MXT_MAX_YC, 0, 0);
+			     0, data->max_y, 0, 0);
 
 	input_set_drvdata(input_dev, data);
-
-	data->client = client;
-	data->input_dev = input_dev;
-	data->pdata = pdata;
-	data->irq = client->irq;
-
 	i2c_set_clientdata(client, data);
 
 	error = mxt_initialize(data);
@@ -1090,6 +1118,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 		goto err_free_object;
 	}
 
+	error = mxt_make_highchg(data);
+	if (error)
+		goto err_free_irq;
+
 	error = input_register_device(input_dev);
 	if (error)
 		goto err_free_irq;
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 3d9b5166ebe9..432c69be6ac6 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -317,7 +317,7 @@ err_unmap_regs:
 err_release_mem:
 	release_mem_region(res->start, resource_size(res));
 err_free_dev:
-	input_free_device(ts_dev->input);
+	input_free_device(input_dev);
 err_free_mem:
 	kfree(ts_dev);
 	return err;
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 45f93d0f5592..211811ae5525 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -396,14 +396,14 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
 	set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
 
 	if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
-			IRQF_SHARED | IRQF_DISABLED, "h3600_action", &ts->dev)) {
+			IRQF_SHARED | IRQF_DISABLED, "h3600_action", ts->dev)) {
 		printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
 		err = -EBUSY;
 		goto fail1;
 	}
 
 	if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
-			IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", &ts->dev)) {
+			IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", ts->dev)) {
 		printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
 		err = -EBUSY;
 		goto fail2;
@@ -439,8 +439,8 @@ static void h3600ts_disconnect(struct serio *serio)
 {
 	struct h3600_dev *ts = serio_get_drvdata(serio);
 
-	free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
-	free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev);
+	free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
+	free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
 	input_get_device(ts->dev);
 	input_unregister_device(ts->dev);
 	serio_close(serio);
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index c0307b22d86f..66c96bfc5522 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -542,7 +542,7 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev)
 	 * ADC power on, start, enable PENDET and set loop delay
 	 * ADC loop delay is set to 4.5 ms approximately
 	 * Loop delay more than this results in jitter in adc readings
-	 * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+	 * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET
 	 * interrupt generation sometimes.
 	 */
 
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index b6b8b1c7ecea..3242e7076258 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -219,7 +219,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
 		}
 
 		wm->pen_irq = gpio_to_irq(irq);
-		set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
+		irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
 	} else /* pen irq not supported */
 		pen_int = 0;
 
diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c
new file mode 100644
index 000000000000..4f2713d92791
--- /dev/null
+++ b/drivers/input/touchscreen/max11801_ts.c
@@ -0,0 +1,272 @@
+/*
+ * Driver for MAXI MAX11801 - A Resistive touch screen controller with
+ * i2c interface
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Zhang Jiejing <jiejing.zhang@freescale.com>
+ *
+ * Based on mcs5000_ts.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+/*
+ * This driver aims to support the series of MAXI touch chips max11801
+ * through max11803. The main difference between these 4 chips can be
+ * found in the table below:
+ * -----------------------------------------------------
+ * | CHIP     |  AUTO MODE SUPPORT(FIFO) | INTERFACE    |
+ * |----------------------------------------------------|
+ * | max11800 |  YES                     |   SPI        |
+ * | max11801 |  YES                     |   I2C        |
+ * | max11802 |  NO                      |   SPI        |
+ * | max11803 |  NO                      |   I2C        |
+ * ------------------------------------------------------
+ *
+ * Currently, this driver only supports max11801.
+ *
+ * Data Sheet:
+ * http://www.maxim-ic.com/datasheet/index.mvp/id/5943
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+/* Register Address define */
+#define GENERNAL_STATUS_REG		0x00
+#define GENERNAL_CONF_REG		0x01
+#define MESURE_RES_CONF_REG		0x02
+#define MESURE_AVER_CONF_REG		0x03
+#define ADC_SAMPLE_TIME_CONF_REG	0x04
+#define PANEL_SETUPTIME_CONF_REG	0x05
+#define DELAY_CONVERSION_CONF_REG	0x06
+#define TOUCH_DETECT_PULLUP_CONF_REG	0x07
+#define AUTO_MODE_TIME_CONF_REG		0x08 /* only for max11800/max11801 */
+#define APERTURE_CONF_REG		0x09 /* only for max11800/max11801 */
+#define AUX_MESURE_CONF_REG		0x0a
+#define OP_MODE_CONF_REG		0x0b
+
+/* FIFO is found only in max11800 and max11801 */
+#define FIFO_RD_CMD			(0x50 << 1)
+#define MAX11801_FIFO_INT		(1 << 2)
+#define MAX11801_FIFO_OVERFLOW		(1 << 3)
+
+#define XY_BUFSIZE			4
+#define XY_BUF_OFFSET			4
+
+#define MAX11801_MAX_X			0xfff
+#define MAX11801_MAX_Y			0xfff
+
+#define MEASURE_TAG_OFFSET		2
+#define MEASURE_TAG_MASK		(3 << MEASURE_TAG_OFFSET)
+#define EVENT_TAG_OFFSET		0
+#define EVENT_TAG_MASK			(3 << EVENT_TAG_OFFSET)
+#define MEASURE_X_TAG			(0 << MEASURE_TAG_OFFSET)
+#define MEASURE_Y_TAG			(1 << MEASURE_TAG_OFFSET)
+
+/* These are the state of touch event state machine */
+enum {
+	EVENT_INIT,
+	EVENT_MIDDLE,
+	EVENT_RELEASE,
+	EVENT_FIFO_END
+};
+
+struct max11801_data {
+	struct i2c_client		*client;
+	struct input_dev		*input_dev;
+};
+
+static u8 read_register(struct i2c_client *client, int addr)
+{
+	/* XXX: The chip ignores LSB of register address */
+	return i2c_smbus_read_byte_data(client, addr << 1);
+}
+
+static int max11801_write_reg(struct i2c_client *client, int addr, int data)
+{
+	/* XXX: The chip ignores LSB of register address */
+	return i2c_smbus_write_byte_data(client, addr << 1, data);
+}
+
+static irqreturn_t max11801_ts_interrupt(int irq, void *dev_id)
+{
+	struct max11801_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	int status, i, ret;
+	u8 buf[XY_BUFSIZE];
+	int x = -1;
+	int y = -1;
+
+	status = read_register(data->client, GENERNAL_STATUS_REG);
+
+	if (status & (MAX11801_FIFO_INT | MAX11801_FIFO_OVERFLOW)) {
+		status = read_register(data->client, GENERNAL_STATUS_REG);
+
+		ret = i2c_smbus_read_i2c_block_data(client, FIFO_RD_CMD,
+						    XY_BUFSIZE, buf);
+
+		/*
+		 * We should get 4 bytes buffer that contains X,Y
+		 * and event tag
+		 */
+		if (ret < XY_BUFSIZE)
+			goto out;
+
+		for (i = 0; i < XY_BUFSIZE; i += XY_BUFSIZE / 2) {
+			if ((buf[i + 1] & MEASURE_TAG_MASK) == MEASURE_X_TAG)
+				x = (buf[i] << XY_BUF_OFFSET) +
+				    (buf[i + 1] >> XY_BUF_OFFSET);
+			else if ((buf[i + 1] & MEASURE_TAG_MASK) == MEASURE_Y_TAG)
+				y = (buf[i] << XY_BUF_OFFSET) +
+				    (buf[i + 1] >> XY_BUF_OFFSET);
+		}
+
+		if ((buf[1] & EVENT_TAG_MASK) != (buf[3] & EVENT_TAG_MASK))
+			goto out;
+
+		switch (buf[1] & EVENT_TAG_MASK) {
+		case EVENT_INIT:
+			/* fall through */
+		case EVENT_MIDDLE:
+			input_report_abs(data->input_dev, ABS_X, x);
+			input_report_abs(data->input_dev, ABS_Y, y);
+			input_event(data->input_dev, EV_KEY, BTN_TOUCH, 1);
+			input_sync(data->input_dev);
+			break;
+
+		case EVENT_RELEASE:
+			input_event(data->input_dev, EV_KEY, BTN_TOUCH, 0);
+			input_sync(data->input_dev);
+			break;
+
+		case EVENT_FIFO_END:
+			break;
+		}
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+static void __devinit max11801_ts_phy_init(struct max11801_data *data)
+{
+	struct i2c_client *client = data->client;
+
+	/* Average X,Y, take 16 samples, average eight media sample */
+	max11801_write_reg(client, MESURE_AVER_CONF_REG, 0xff);
+	/* X,Y panel setup time set to 20us */
+	max11801_write_reg(client, PANEL_SETUPTIME_CONF_REG, 0x11);
+	/* Rough pullup time (2uS), Fine pullup time (10us)  */
+	max11801_write_reg(client, TOUCH_DETECT_PULLUP_CONF_REG, 0x10);
+	/* Auto mode init period = 5ms , scan period = 5ms*/
+	max11801_write_reg(client, AUTO_MODE_TIME_CONF_REG, 0xaa);
+	/* Aperture X,Y set to +- 4LSB */
+	max11801_write_reg(client, APERTURE_CONF_REG, 0x33);
+	/* Enable Power, enable Automode, enable Aperture, enable Average X,Y */
+	max11801_write_reg(client, OP_MODE_CONF_REG, 0x36);
+}
+
+static int __devinit max11801_ts_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct max11801_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	data = kzalloc(sizeof(struct max11801_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+
+	input_dev->name = "max11801_ts";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, MAX11801_MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX11801_MAX_Y, 0, 0);
+	input_set_drvdata(input_dev, data);
+
+	max11801_ts_phy_init(data);
+
+	error = request_threaded_irq(client->irq, NULL, max11801_ts_interrupt,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "max11801_ts", data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, data);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static __devexit int max11801_ts_remove(struct i2c_client *client)
+{
+	struct max11801_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id max11801_ts_id[] = {
+	{"max11801", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max11801_ts_id);
+
+static struct i2c_driver max11801_ts_driver = {
+	.driver = {
+		.name	= "max11801_ts",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= max11801_ts_id,
+	.probe		= max11801_ts_probe,
+	.remove		= __devexit_p(max11801_ts_remove),
+};
+
+static int __init max11801_ts_init(void)
+{
+	return i2c_add_driver(&max11801_ts_driver);
+}
+
+static void __exit max11801_ts_exit(void)
+{
+	i2c_del_driver(&max11801_ts_driver);
+}
+
+module_init(max11801_ts_init);
+module_exit(max11801_ts_exit);
+
+MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MAXI MAX11801 controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index c8c136cf7bbc..43031492d733 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -43,7 +43,6 @@ struct tps6507x_ts {
 	struct input_dev	*input_dev;
 	struct device		*dev;
 	char			phys[32];
-	struct workqueue_struct *wq;
 	struct delayed_work	work;
 	unsigned		polling;	/* polling is active */
 	struct ts_event		tc;
@@ -220,8 +219,8 @@ done:
 	poll = 1;
 
 	if (poll) {
-		schd = queue_delayed_work(tsc->wq, &tsc->work,
-					  msecs_to_jiffies(tsc->poll_period));
+		schd = schedule_delayed_work(&tsc->work,
+					msecs_to_jiffies(tsc->poll_period));
 		if (schd)
 			tsc->polling = 1;
 		else {
@@ -303,7 +302,6 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 	tsc->input_dev = input_dev;
 
 	INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
-	tsc->wq = create_workqueue("TPS6507x Touchscreen");
 
 	if (init_data) {
 		tsc->poll_period = init_data->poll_period;
@@ -325,8 +323,8 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 	if (error)
 		goto err2;
 
-	schd = queue_delayed_work(tsc->wq, &tsc->work,
-				  msecs_to_jiffies(tsc->poll_period));
+	schd = schedule_delayed_work(&tsc->work,
+				     msecs_to_jiffies(tsc->poll_period));
 
 	if (schd)
 		tsc->polling = 1;
@@ -341,7 +339,6 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 
 err2:
 	cancel_delayed_work_sync(&tsc->work);
-	destroy_workqueue(tsc->wq);
 	input_free_device(input_dev);
 err1:
 	kfree(tsc);
@@ -357,7 +354,6 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
 	struct input_dev *input_dev = tsc->input_dev;
 
 	cancel_delayed_work_sync(&tsc->work);
-	destroy_workqueue(tsc->wq);
 
 	input_unregister_device(input_dev);
 
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 80467f262331..fadc11545b1e 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -27,9 +27,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
 
-#define TS_POLL_DELAY			1 /* ms delay between samples */
-#define TS_POLL_PERIOD			1 /* ms delay between samples */
-
 #define TSC2007_MEASURE_TEMP0		(0x0 << 4)
 #define TSC2007_MEASURE_AUX		(0x2 << 4)
 #define TSC2007_MEASURE_TEMP1		(0x4 << 4)
@@ -75,6 +72,9 @@ struct tsc2007 {
 
 	u16			model;
 	u16			x_plate_ohms;
+	u16			max_rt;
+	unsigned long		poll_delay;
+	unsigned long		poll_period;
 
 	bool			pendown;
 	int			irq;
@@ -156,6 +156,7 @@ static void tsc2007_work(struct work_struct *work)
 {
 	struct tsc2007 *ts =
 		container_of(to_delayed_work(work), struct tsc2007, work);
+	bool debounced = false;
 	struct ts_event tc;
 	u32 rt;
 
@@ -184,13 +185,14 @@ static void tsc2007_work(struct work_struct *work)
 	tsc2007_read_values(ts, &tc);
 
 	rt = tsc2007_calculate_pressure(ts, &tc);
-	if (rt > MAX_12BIT) {
+	if (rt > ts->max_rt) {
 		/*
 		 * Sample found inconsistent by debouncing or pressure is
 		 * beyond the maximum. Don't report it to user space,
 		 * repeat at least once more the measurement.
 		 */
 		dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
+		debounced = true;
 		goto out;
 
 	}
@@ -225,9 +227,9 @@ static void tsc2007_work(struct work_struct *work)
 	}
 
  out:
-	if (ts->pendown)
+	if (ts->pendown || debounced)
 		schedule_delayed_work(&ts->work,
-				      msecs_to_jiffies(TS_POLL_PERIOD));
+				      msecs_to_jiffies(ts->poll_period));
 	else
 		enable_irq(ts->irq);
 }
@@ -239,7 +241,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
 	if (!ts->get_pendown_state || likely(ts->get_pendown_state())) {
 		disable_irq_nosync(ts->irq);
 		schedule_delayed_work(&ts->work,
-				      msecs_to_jiffies(TS_POLL_DELAY));
+				      msecs_to_jiffies(ts->poll_delay));
 	}
 
 	if (ts->clear_penirq)
@@ -292,6 +294,9 @@ static int __devinit tsc2007_probe(struct i2c_client *client,
 
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
+	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
+	ts->poll_delay        = pdata->poll_delay ? : 1;
+	ts->poll_period       = pdata->poll_period ? : 1;
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
 
@@ -305,9 +310,10 @@ static int __devinit tsc2007_probe(struct i2c_client *client,
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
-	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, pdata->fuzzx, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, pdata->fuzzy, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT,
+			pdata->fuzzz, 0);
 
 	if (pdata->init_platform_hw)
 		pdata->init_platform_hw();
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 028a5363eea1..3b5b5df04dd6 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -6,7 +6,7 @@
  *  Copyright:	MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 6b5be742c27d..98e61175d3f5 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -306,7 +306,7 @@ static int wm9705_acc_enable(struct wm97xx *wm, int enable)
 	dig2 = wm->dig[2];
 
 	if (enable) {
-		/* continous mode */
+		/* continuous mode */
 		if (wm->mach_ops->acc_startup &&
 		    (ret = wm->mach_ops->acc_startup(wm)) < 0)
 			return ret;
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 7490b05c3566..2bc2fb801009 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -419,7 +419,7 @@ static int wm9712_acc_enable(struct wm97xx *wm, int enable)
 	dig2 = wm->dig[2];
 
 	if (enable) {
-		/* continous mode */
+		/* continuous mode */
 		if (wm->mach_ops->acc_startup) {
 			ret = wm->mach_ops->acc_startup(wm);
 			if (ret < 0)
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 238b5132712e..73ec99568f12 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -431,7 +431,7 @@ static int wm9713_acc_enable(struct wm97xx *wm, int enable)
 	dig3 = wm->dig[2];
 
 	if (enable) {
-		/* continous mode */
+		/* continuous mode */
 		if (wm->mach_ops->acc_startup &&
 			(ret = wm->mach_ops->acc_startup(wm)) < 0)
 			return ret;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 6b75c9f660ae..5dbe73af2f8f 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -335,7 +335,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
 	 */
 	if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
 		if (wm->pen_is_down && !pen_was_down) {
-			/* Data is not availiable immediately on pen down */
+			/* Data is not available immediately on pen down */
 			queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
 		}
 
@@ -354,7 +354,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
  * Codec PENDOWN irq handler
  *
  * We have to disable the codec interrupt in the handler because it
- * can take upto 1ms to clear the interrupt source. We schedule a task
+ * can take up to 1ms to clear the interrupt source. We schedule a task
  * in a work queue to do the actual interaction with the chip.  The
  * interrupt is then enabled again in the slow handler when the source
  * has been cleared.
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 048849867643..5b0f15ec874a 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -193,7 +193,7 @@ static int zylonite_wm97xx_probe(struct platform_device *pdev)
 		gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
 	wm->pen_irq = IRQ_GPIO(gpio_touch_irq);
-	set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
+	irq_set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
 
 	wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
 			   WM97XX_GPIO_POL_HIGH,