diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-10-16 22:29:55 +0200 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-10-16 22:29:55 +0200 |
| commit | 0ae2e178652753ae1797d407755a3505f7c1d2a7 (patch) | |
| tree | fa725edcfb4b9752ebf2aa49a3e42e158537d4ed /drivers/ide/pci/piix.c | |
| parent | b8b739d3361c16773a30fe5c0360336bbc19f435 (diff) | |
| download | blackbird-op-linux-0ae2e178652753ae1797d407755a3505f7c1d2a7.tar.gz blackbird-op-linux-0ae2e178652753ae1797d407755a3505f7c1d2a7.zip | |
ide: remove ->ide_dma_check (take 2)
* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend
on BIOS for programming device/controller for DMA. Set it in cy82c693,
generic, ns87415, opti621 and trm290 host drivers.
* Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520
host driver.
* Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag.
* Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check
implementations. Fix all places checking for presence of ->ide_dma_check
hook to check for ->ide_dma_on instead.
* Remove no longer needed code from config_drive_for_dma().
* Make ide_tune_dma() static.
v2:
* Fix config_drive_for_dma() return values.
* Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding
dummy config_drive_for_dma() inline.
* Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check().
* Fix init_hwif_it8213() comment.
There should be no functionality changes caused by this patch.
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pci/piix.c')
| -rw-r--r-- | drivers/ide/pci/piix.c | 19 |
1 files changed, 0 insertions, 19 deletions
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index dcb0701f10b5..d5a31e9f5727 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -255,24 +255,6 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) } /** - * piix_config_drive_xfer_rate - set up an IDE device - * @drive: IDE drive to configure - * - * Set up the PIIX interface for the best available speed on this - * interface, preferring DMA to PIO. - */ - -static int piix_config_drive_xfer_rate (ide_drive_t *drive) -{ - if (ide_tune_dma(drive)) - return 0; - - ide_set_max_pio(drive); - - return -1; -} - -/** * piix_is_ichx - check if ICHx * @dev: PCI device to check * @@ -432,7 +414,6 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) if (no_piix_dma) hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0; - hwif->ide_dma_check = &piix_config_drive_xfer_rate; if (!noautodma) hwif->autodma = 1; |
