diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-02-17 02:40:20 +0100 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-02-17 02:40:20 +0100 |
| commit | 39baf8a798926eb675c9360d5822ca86ed92866e (patch) | |
| tree | e9caacbf354d74c72f9cdfc086442a43147edd6a /drivers/ide/pci/jmicron.c | |
| parent | 296d9bcc00c7180d327235d6f1e4b7f4ac0166a1 (diff) | |
| download | blackbird-op-linux-39baf8a798926eb675c9360d5822ca86ed92866e.tar.gz blackbird-op-linux-39baf8a798926eb675c9360d5822ca86ed92866e.zip | |
atiixp/jmicron/triflex: fix PIO fallback
* atiixp: if DMA can't be used atiixp_config_drive_for_dma() should return 0,
atiixp_dma_check() will tune the correct PIO mode anyway
* jmicron: if DMA can't be used config_chipset_for_dma() should return 0,
micron_config_drive_for_dma() will tune the correct PIO mode anyway
config_jmicron_chipset_for_pio(drive, !speed) doesn't program
device transfer mode for speed != 0 (only wastes some CPU cycles
on ide_get_best_pio_mode() call) so remove it
* triflex: if DMA can't be used triflex_config_drive_for_dma() should return 0,
triflex_config_drive_xfer_rate() will tune correct PIO mode anyway
Above changes also fix (theoretical) issue when ->speedproc fails to set
device transfer mode (i.e. when ide_config_drive_speed() fails to program it)
but one of DMA transfer modes is already enabled on the device by the BIOS.
In such scenario ide_dma_enable() will incorrectly return true statement
and ->ide_dma_check will try to enable DMA on the device.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pci/jmicron.c')
| -rw-r--r-- | drivers/ide/pci/jmicron.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index f07bbbed1778..75c2b409908c 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -147,7 +147,9 @@ static int config_chipset_for_dma (ide_drive_t *drive) { u8 speed = ide_dma_speed(drive, jmicron_ratemask(drive)); - config_jmicron_chipset_for_pio(drive, !speed); + if (!speed) + return 0; + jmicron_tune_chipset(drive, speed); return ide_dma_enable(drive); } |
