Merge branch 'omap2-upstream' into devel

5 files changed, 116 insertions, 17 deletions

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cce5a614758d..fde26345a379 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -382,9 +382,8 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 			break;
 
 		case DAVINCI_I2C_IVR_ARDY:
-			w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
-			MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1);
-			davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+			davinci_i2c_write_reg(dev,
+				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
 			complete(&dev->cmd_complete);
 			break;
 
@@ -397,12 +396,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 				if (dev->buf_len)
 					continue;
 
-				w = davinci_i2c_read_reg(dev,
-							 DAVINCI_I2C_STR_REG);
-				MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0);
 				davinci_i2c_write_reg(dev,
-						      DAVINCI_I2C_STR_REG,
-						      w);
+					DAVINCI_I2C_STR_REG,
+					DAVINCI_I2C_IMR_RRDY);
 			} else
 				dev_err(dev->dev, "RDR IRQ while no "
 					"data requested\n");
@@ -428,9 +424,8 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
 			break;
 
 		case DAVINCI_I2C_IVR_SCD:
-			w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
-			MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1);
-			davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+			davinci_i2c_write_reg(dev,
+				DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
 			complete(&dev->cmd_complete);
 			break;
 
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 7c7eb0cfeceb..22bb247d0e60 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -55,7 +55,7 @@ MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
 
 static int iic_force_fast;
 module_param(iic_force_fast, bool, 0);
-MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
 
 #define DBG_LEVEL 0
 
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index cb9abe7565a7..b1c050ff311d 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -131,11 +131,15 @@ static const struct i2c_algorithm usb_algorithm = {
 
 /* ----- begin of usb layer ---------------------------------------------- */
 
-/* The usb i2c interface uses a vid/pid pair donated by */
-/* Future Technology Devices International Ltd. */
+/*
+ * Initially the usb i2c interface uses a vid/pid pair donated by
+ * Future Technology Devices International Ltd., later a pair was
+ * bought from EZPrototypes
+ */
 static struct usb_device_id i2c_tiny_usb_table [] = {
-	{ USB_DEVICE(0x0403, 0xc631) },
-	{ }			/* Terminating entry */
+	{ USB_DEVICE(0x0403, 0xc631) },   /* FTDI */
+	{ USB_DEVICE(0x1c40, 0x0534) },   /* EZPrototypes */
+	{ }                               /* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b21593f93586..2da2edfa68ec 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -93,6 +93,7 @@ config ISP1301_OMAP
 
 config TPS65010
 	tristate "TPS6501x Power Management chips"
+	depends on HAVE_GPIO_LIB
 	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 	help
 	  If you say yes here you get support for the TPS6501x series of
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 4154a9108859..b67f69c2e7f3 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -30,9 +30,13 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 
 #include <linux/i2c/tps65010.h>
 
+#include <asm/gpio.h>
+
+
 /*-------------------------------------------------------------------------*/
 
 #define	DRIVER_VERSION	"2 May 2005"
@@ -84,7 +88,9 @@ struct tps65010 {
 	u8			chgstatus, regstatus, chgconf;
 	u8			nmask1, nmask2;
 
-	/* not currently tracking GPIO state */
+	u8			outmask;
+	struct gpio_chip	chip;
+	struct platform_device	*leds;
 };
 
 #define	POWER_POLL_DELAY	msecs_to_jiffies(5000)
@@ -449,12 +455,72 @@ static irqreturn_t tps65010_irq(int irq, void *_tps)
 
 /*-------------------------------------------------------------------------*/
 
+/* offsets 0..3 == GPIO1..GPIO4
+ * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes)
+ */
+static void
+tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < 4)
+		tps65010_set_gpio_out_value(offset + 1, value);
+	else
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+}
+
+static int
+tps65010_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	/* GPIOs may be input-only */
+	if (offset < 4) {
+		struct tps65010		*tps;
+
+		tps = container_of(chip, struct tps65010, chip);
+		if (!(tps->outmask & (1 << offset)))
+			return -EINVAL;
+		tps65010_set_gpio_out_value(offset + 1, value);
+	} else
+		tps65010_set_led(offset - 3, value ? ON : OFF);
+
+	return 0;
+}
+
+static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int			value;
+	struct tps65010		*tps;
+
+	tps = container_of(chip, struct tps65010, chip);
+
+	if (offset < 4) {
+		value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
+		if (value < 0)
+			return 0;
+		if (value & (1 << (offset + 4)))	/* output */
+			return !(value & (1 << offset));
+		else					/* input */
+			return (value & (1 << offset));
+	}
+
+	/* REVISIT we *could* report LED1/nPG and LED2 state ... */
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
 static struct tps65010 *the_tps;
 
 static int __exit tps65010_remove(struct i2c_client *client)
 {
 	struct tps65010		*tps = i2c_get_clientdata(client);
+	struct tps65010_board	*board = client->dev.platform_data;
 
+	if (board && board->teardown) {
+		int status = board->teardown(client, board->context);
+		if (status < 0)
+			dev_dbg(&client->dev, "board %s %s err %d\n",
+				"teardown", client->name, status);
+	}
 	if (client->irq > 0)
 		free_irq(client->irq, tps);
 	cancel_delayed_work(&tps->work);
@@ -469,6 +535,7 @@ static int tps65010_probe(struct i2c_client *client)
 {
 	struct tps65010		*tps;
 	int			status;
+	struct tps65010_board	*board = client->dev.platform_data;
 
 	if (the_tps) {
 		dev_dbg(&client->dev, "only one tps6501x chip allowed\n");
@@ -577,6 +644,38 @@ static int tps65010_probe(struct i2c_client *client)
 
 	tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
 				tps, DEBUG_FOPS);
+
+	/* optionally register GPIOs */
+	if (board && board->base > 0) {
+		tps->outmask = board->outmask;
+
+		tps->chip.label = client->name;
+
+		tps->chip.set = tps65010_gpio_set;
+		tps->chip.direction_output = tps65010_output;
+
+		/* NOTE:  only partial support for inputs; nyet IRQs */
+		tps->chip.get = tps65010_gpio_get;
+
+		tps->chip.base = board->base;
+		tps->chip.ngpio = 6;
+		tps->chip.can_sleep = 1;
+
+		status = gpiochip_add(&tps->chip);
+		if (status < 0)
+			dev_err(&client->dev, "can't add gpiochip, err %d\n",
+					status);
+		else if (board->setup) {
+			status = board->setup(client, board->context);
+			if (status < 0) {
+				dev_dbg(&client->dev,
+					"board %s %s err %d\n",
+					"setup", client->name, status);
+				status = 0;
+			}
+		}
+	}
+
 	return 0;
 fail1:
 	kfree(tps);