Merge branch 'linus' into core/softlockup

35 files changed, 0 insertions, 1131 deletions

diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 75089febbc13..9fee3ca17344 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = {
 };
 
 static struct i2c_adapter ioc_ops = {
-	.id			= I2C_HW_B_IOC,
 	.algo_data		= &ioc_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b9458e..981e080b32ae 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI1535,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index dd9e796fad69..f70f46582c6c 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = {
 
 static struct i2c_adapter ali1563_adapter = {
 	.owner	= THIS_MODULE,
-	.id	= I2C_HW_SMBUS_ALI1563,
 	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo	= &ali1563_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 234fdde7d40e..39066dee46e3 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter ali15x3_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI15X3,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 36bee5b9c952..220f4a1eee1d 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 struct i2c_adapter amd756_smbus = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_AMD756,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 3972208876b3..edab51973bf5 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev,
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		"SMBus2 AMD8111 adapter at %04x", smbus->base);
-	smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 66a04c2c660f..f78ce523e3db 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev)
 	priv->xfer_timeout = 200;
 	priv->ack_timeout = 200;
 
-	priv->adap.id = I2C_HW_AU1550_PSC;
 	priv->adap.nr = pdev->id;
 	priv->adap.algo = &au1550_algo;
 	priv->adap.algo_data = priv;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3fd2c417c1e0..fc548b3d002e 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	iface->timeout_timer.data = (unsigned long)iface;
 
 	p_adap = &iface->adap;
-	p_adap->id = I2C_HW_BLACKFIN;
 	p_adap->nr = pdev->id;
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
 	p_adap->algo = &bfin_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 0ed3ccb81b63..448b4bf35eb7 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = {
 static struct i2c_adapter pcf_isa_ops = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
 	.name		= "i2c-elektor",
 };
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 648aa7baff83..bec9b845dd16 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = {
 static struct i2c_adapter hydra_adap = {
 	.owner		= THIS_MODULE,
 	.name		= "Hydra i2c",
-	.id		= I2C_HW_B_HYDRA,
 	.algo_data	= &hydra_bit_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 526625eaa84b..230238df56c4 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter i801_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_I801,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 651f2f1ae5b7..88f0db73b364 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	adap->dev.parent = &ofdev->dev;
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
-	adap->id = I2C_HW_OCP;
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo = &iic_algo;
 	adap->timeout = 1;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index fc2714ac0c0f..3190690c26ce 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	}
 
 	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
-	new_adapter->id = I2C_HW_IOP3XX;
 	new_adapter->owner = THIS_MODULE;
 	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	new_adapter->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 05d72e981353..8e8467970481 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
 	drv_data->algo_data.udelay = 6;
 	drv_data->algo_data.timeout = 100;
 
-	drv_data->adapter.id = I2C_HW_B_IXP2000,
 	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 		sizeof(drv_data->adapter.name));
 	drv_data->adapter.algo_data = &drv_data->algo_data,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fcc8544..aedbbe6618db 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = {
 static struct i2c_adapter mpc_ops = {
 	.owner = THIS_MODULE,
 	.name = "MPC adapter",
-	.id = I2C_HW_MPC107,
 	.algo = &mpc_algo,
 	.timeout = 1,
 };
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9e8118d2fe64..eeda276f8f16 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		goto exit_unmap_regs;
 	}
 	drv_data->adapter.dev.parent = &pd->dev;
-	drv_data->adapter.id = I2C_HW_MV64XXX;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3b19bc41a60b..05af6cd7f270 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
 		return -EBUSY;
 	}
 	smbus->adapter.owner = THIS_MODULE;
-	smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index b2b8380f6602..322c5691e38e 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = {
 static struct i2c_adapter parport_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
-	.id		= I2C_HW_B_LP,
 	.algo_data	= &parport_algo_data,
 	.name		= "Parallel port adapter (light)",
 };
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a257cd5cd134..0d8998610c74 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port)
 	/* Fill the rest of the structure */
 	adapter->adapter.owner = THIS_MODULE;
 	adapter->adapter.class = I2C_CLASS_HWMON;
-	adapter->adapter.id = I2C_HW_B_LP;
 	strlcpy(adapter->adapter.name, "Parallel port adapter",
 		sizeof(adapter->adapter.name));
 	adapter->algo_data = parport_algo_data;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 9eb76268ec78..4aa8138cb0a9 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = {
 
 static struct i2c_adapter pca_isa_ops = {
 	.owner          = THIS_MODULE,
-	.id		= I2C_HW_A_ISA,
 	.algo_data	= &pca_isa_data,
 	.name		= "PCA9564 ISA Adapter",
 	.timeout	= 100,
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index eaa9b387543e..761f9dd53620 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter piix4_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_PIIX4,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 4ddefbf238e9..98b1ec489159 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
 static struct i2c_adapter sibyte_board_adapter[2] = {
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[0],
@@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = {
 	},
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[1],
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 8ce2daff985c..f320ab27da46 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS5595,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 9c9c016ff2b5..50c3610e6028 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis630_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS630,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f1bba6396641..7e1594b40579 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS96X,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 29cef0433f34..8b24f192103a 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = {
 
 static struct i2c_adapter vt586b_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VIA,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.name		= "VIA i2c",
 	.algo_data	= &bit_data,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 9f194d9efd91..02e6f724b05f 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = {
 
 static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_VIA2,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1d4ae26ba73d..1a474acc0ddd 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = {
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_TV_ANALOG, 
 	.name		= "I2C Voodoo3/Banshee adapter",
 	.algo_data	= &voo_i2c_bit_data,
@@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = {
 
 static struct i2c_adapter voodoo3_ddc_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_DDC, 
 	.name		= "DDC Voodoo3/Banshee adapter",
 	.algo_data	= &voo_ddc_bit_data,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ed794b145a11..648ecc6f60e6 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
 	i2c_set_adapdata(adapter, iface);
 	snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
 	adapter->owner = THIS_MODULE;
-	adapter->id = I2C_HW_SMBUS_SCX200;
 	adapter->algo = &scx200_acb_algorithm;
 	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adapter->dev.parent = dev;
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index e4c98539c517..162b74a04886 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = {
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
 	.class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		   = I2C_HW_B_SCX200,
 	.algo_data	   = &scx200_i2c_data,
 	.name	= "NatSemi SCx200 I2C",
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 59c3d23f5bdc..c80312c1f382 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config AT24
-	tristate "EEPROMs from most vendors"
-	depends on SYSFS && EXPERIMENTAL
-	help
-	  Enable this driver to get read/write support to most I2C EEPROMs,
-	  after you configure the driver to know about each EEPROM on
-	  your target board.  Use these generic chip names, instead of
-	  vendor-specific ones like at24c64 or 24lc02:
-
-	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
-	  Unless you like data loss puzzles, always be sure that any chip
-	  you configure as a 24c32 (32 kbit) or larger is NOT really a
-	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
-	  as read-only won't help recover from this. Also, if your chip
-	  has any software write-protect mechanism you may want to review the
-	  code to make sure this driver won't turn it on by accident.
-
-	  If you use this with an SMBus adapter instead of an I2C adapter,
-	  full functionality is not available.  Only smaller devices are
-	  supported (24c16 and below, max 4 kByte).
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at24.
-
-config SENSORS_EEPROM
-	tristate "EEPROM reader"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get read-only access to the EEPROM data
-	  available on modern memory DIMMs and Sony Vaio laptops.  Such
-	  EEPROMs could theoretically be available on other devices as well.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called eeprom.
-
 config SENSORS_PCF8574
 	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
@@ -139,15 +102,4 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
-config MCU_MPC8349EMITX
-	tristate "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here to enable soft power-off functionality on the Freescale
-	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-	  also register MCU GPIOs with the generic GPIO API, so you'll able
-	  to use MCU pins as GPIOs.
-
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 83accaaf8164..d142f238a2de 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,15 +11,12 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_AT24)		+= at24.o
-obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
deleted file mode 100644
index d4775528abc6..000000000000
--- a/drivers/i2c/chips/at24.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * at24.c - handle most I2C EEPROMs
- *
- * Copyright (C) 2005-2007 David Brownell
- * Copyright (C) 2008 Wolfram Sang, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-#include <linux/mod_devicetable.h>
-#include <linux/log2.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-/*
- * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
- * Differences between different vendor product lines (like Atmel AT24C or
- * MicroChip 24LC, etc) won't much matter for typical read/write access.
- * There are also I2C RAM chips, likewise interchangeable. One example
- * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
- *
- * However, misconfiguration can lose data. "Set 16-bit memory address"
- * to a part with 8-bit addressing will overwrite data. Writing with too
- * big a page size also loses data. And it's not safe to assume that the
- * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
- * uses 0x51, for just one example.
- *
- * Accordingly, explicit board-specific configuration data should be used
- * in almost all cases. (One partial exception is an SMBus used to access
- * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
- *
- * So this driver uses "new style" I2C driver binding, expecting to be
- * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
- * similar kernel-resident tables; or, configuration data coming from
- * a bootloader.
- *
- * Other than binding model, current differences from "eeprom" driver are
- * that this one handles write access and isn't restricted to 24c02 devices.
- * It also handles larger devices (32 kbit and up) with two-byte addresses,
- * which won't work on pure SMBus systems.
- */
-
-struct at24_data {
-	struct at24_platform_data chip;
-	bool use_smbus;
-
-	/*
-	 * Lock protects against activities from other Linux tasks,
-	 * but not from changes by other I2C masters.
-	 */
-	struct mutex lock;
-	struct bin_attribute bin;
-
-	u8 *writebuf;
-	unsigned write_max;
-	unsigned num_addresses;
-
-	/*
-	 * Some chips tie up multiple I2C addresses; dummy devices reserve
-	 * them for us, and we'll use them with SMBus calls.
-	 */
-	struct i2c_client *client[];
-};
-
-/*
- * This parameter is to help this driver avoid blocking other drivers out
- * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
- * clock, one 256 byte read takes about 1/43 second which is excessive;
- * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
- * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
- *
- * This value is forced to be a power of two so that writes align on pages.
- */
-static unsigned io_limit = 128;
-module_param(io_limit, uint, 0);
-MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
-
-/*
- * Specs often allow 5 msec for a page write, sometimes 20 msec;
- * it's important to recover from write timeouts.
- */
-static unsigned write_timeout = 25;
-module_param(write_timeout, uint, 0);
-MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
-
-#define AT24_SIZE_BYTELEN 5
-#define AT24_SIZE_FLAGS 8
-
-#define AT24_BITMASK(x) (BIT(x) - 1)
-
-/* create non-zero magic value for given eeprom parameters */
-#define AT24_DEVICE_MAGIC(_len, _flags) 		\
-	((1 << AT24_SIZE_FLAGS | (_flags)) 		\
-	    << AT24_SIZE_BYTELEN | ilog2(_len))
-
-static const struct i2c_device_id at24_ids[] = {
-	/* needs 8 addresses as A0-A2 are ignored */
-	{ "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
-	/* old variants can't be handled with this generic entry! */
-	{ "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
-	{ "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
-	/* spd is a 24c02 in memory DIMMs */
-	{ "spd", AT24_DEVICE_MAGIC(2048 / 8,
-		AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
-	{ "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
-	/* 24rf08 quirk is handled at i2c-core */
-	{ "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
-	{ "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
-	{ "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
-	{ "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
-	{ "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
-	{ "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
-	{ "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
-	{ "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
-	{ "at24", 0 },
-	{ /* END OF LIST */ }
-};
-MODULE_DEVICE_TABLE(i2c, at24_ids);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * This routine supports chips which consume multiple I2C addresses. It
- * computes the addressing information to be used for a given r/w request.
- * Assumes that sanity checks for offset happened at sysfs-layer.
- */
-static struct i2c_client *at24_translate_offset(struct at24_data *at24,
-		unsigned *offset)
-{
-	unsigned i;
-
-	if (at24->chip.flags & AT24_FLAG_ADDR16) {
-		i = *offset >> 16;
-		*offset &= 0xffff;
-	} else {
-		i = *offset >> 8;
-		*offset &= 0xff;
-	}
-
-	return at24->client[i];
-}
-
-static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
-		unsigned offset, size_t count)
-{
-	struct i2c_msg msg[2];
-	u8 msgbuf[2];
-	struct i2c_client *client;
-	int status, i;
-
-	memset(msg, 0, sizeof(msg));
-
-	/*
-	 * REVISIT some multi-address chips don't rollover page reads to
-	 * the next slave address, so we may need to truncate the count.
-	 * Those chips might need another quirk flag.
-	 *
-	 * If the real hardware used four adjacent 24c02 chips and that
-	 * were misconfigured as one 24c08, that would be a similar effect:
-	 * one "eeprom" file not four, but larger reads would fail when
-	 * they crossed certain pages.
-	 */
-
-	/*
-	 * Slave address and byte offset derive from the offset. Always
-	 * set the byte address; on a multi-master board, another master
-	 * may have changed the chip's "current" address pointer.
-	 */
-	client = at24_translate_offset(at24, &offset);
-
-	if (count > io_limit)
-		count = io_limit;
-
-	/* Smaller eeproms can work given some SMBus extension calls */
-	if (at24->use_smbus) {
-		if (count > I2C_SMBUS_BLOCK_MAX)
-			count = I2C_SMBUS_BLOCK_MAX;
-		status = i2c_smbus_read_i2c_block_data(client, offset,
-				count, buf);
-		dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
-				count, offset, status);
-		return (status < 0) ? -EIO : status;
-	}
-
-	/*
-	 * When we have a better choice than SMBus calls, use a combined
-	 * I2C message. Write address; then read up to io_limit data bytes.
-	 * Note that read page rollover helps us here (unlike writes).
-	 * msgbuf is u8 and will cast to our needs.
-	 */
-	i = 0;
-	if (at24->chip.flags & AT24_FLAG_ADDR16)
-		msgbuf[i++] = offset >> 8;
-	msgbuf[i++] = offset;
-
-	msg[0].addr = client->addr;
-	msg[0].buf = msgbuf;
-	msg[0].len = i;
-
-	msg[1].addr = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].buf = buf;
-	msg[1].len = count;
-
-	status = i2c_transfer(client->adapter, msg, 2);
-	dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
-			count, offset, status);
-
-	if (status == 2)
-		return count;
-	else if (status >= 0)
-		return -EIO;
-	else
-		return status;
-}
-
-static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
-		char *buf, loff_t off, size_t count)
-{
-	struct at24_data *at24;
-	ssize_t retval = 0;
-
-	at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
-	if (unlikely(!count))
-		return count;
-
-	/*
-	 * Read data from chip, protecting against concurrent updates
-	 * from this host, but not from other I2C masters.
-	 */
-	mutex_lock(&at24->lock);
-
-	while (count) {
-		ssize_t	status;
-
-		status = at24_eeprom_read(at24, buf, off, count);
-		if (status <= 0) {
-			if (retval == 0)
-				retval = status;
-			break;
-		}
-		buf += status;
-		off += status;
-		count -= status;
-		retval += status;
-	}
-
-	mutex_unlock(&at24->lock);
-
-	return retval;
-}
-
-
-/*
- * REVISIT: export at24_bin{read,write}() to let other kernel code use
- * eeprom data. For example, it might hold a board's Ethernet address, or
- * board-specific calibration data generated on the manufacturing floor.
- */
-
-
-/*
- * Note that if the hardware write-protect pin is pulled high, the whole
- * chip is normally write protected. But there are plenty of product
- * variants here, including OTP fuses and partial chip protect.
- *
- * We only use page mode writes; the alternative is sloooow. This routine
- * writes at most one page.
- */
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
-		unsigned offset, size_t count)
-{
-	struct i2c_client *client;
-	struct i2c_msg msg;
-	ssize_t status;
-	unsigned long timeout, write_time;
-	unsigned next_page;
-
-	/* Get corresponding I2C address and adjust offset */
-	client = at24_translate_offset(at24, &offset);
-
-	/* write_max is at most a page */
-	if (count > at24->write_max)
-		count = at24->write_max;
-
-	/* Never roll over backwards, to the start of this page */
-	next_page = roundup(offset + 1, at24->chip.page_size);
-	if (offset + count > next_page)
-		count = next_page - offset;
-
-	/* If we'll use I2C calls for I/O, set up the message */
-	if (!at24->use_smbus) {
-		int i = 0;
-
-		msg.addr = client->addr;
-		msg.flags = 0;
-
-		/* msg.buf is u8 and casts will mask the values */
-		msg.buf = at24->writebuf;
-		if (at24->chip.flags & AT24_FLAG_ADDR16)
-			msg.buf[i++] = offset >> 8;
-
-		msg.buf[i++] = offset;
-		memcpy(&msg.buf[i], buf, count);
-		msg.len = i + count;
-	}
-
-	/*
-	 * Writes fail if the previous one didn't complete yet. We may
-	 * loop a few times until this one succeeds, waiting at least
-	 * long enough for one entire page write to work.
-	 */
-	timeout = jiffies + msecs_to_jiffies(write_timeout);
-	do {
-		write_time = jiffies;
-		if (at24->use_smbus) {
-			status = i2c_smbus_write_i2c_block_data(client,
-					offset, count, buf);
-			if (status == 0)
-				status = count;
-		} else {
-			status = i2c_transfer(client->adapter, &msg, 1);
-			if (status == 1)
-				status = count;
-		}
-		dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
-				count, offset, status, jiffies);
-
-		if (status == count)
-			return count;
-
-		/* REVISIT: at HZ=100, this is sloooow */
-		msleep(1);
-	} while (time_before(write_time, timeout));
-
-	return -ETIMEDOUT;
-}
-
-static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
-		char *buf, loff_t off, size_t count)
-{
-	struct at24_data *at24;
-	ssize_t retval = 0;
-
-	at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
-	if (unlikely(!count))
-		return count;
-
-	/*
-	 * Write data to chip, protecting against concurrent updates
-	 * from this host, but not from other I2C masters.
-	 */
-	mutex_lock(&at24->lock);
-
-	while (count) {
-		ssize_t	status;
-
-		status = at24_eeprom_write(at24, buf, off, count);
-		if (status <= 0) {
-			if (retval == 0)
-				retval = status;
-			break;
-		}
-		buf += status;
-		off += status;
-		count -= status;
-		retval += status;
-	}
-
-	mutex_unlock(&at24->lock);
-
-	return retval;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	struct at24_platform_data chip;
-	bool writable;
-	bool use_smbus = false;
-	struct at24_data *at24;
-	int err;
-	unsigned i, num_addresses;
-	kernel_ulong_t magic;
-
-	if (client->dev.platform_data) {
-		chip = *(struct at24_platform_data *)client->dev.platform_data;
-	} else {
-		if (!id->driver_data) {
-			err = -ENODEV;
-			goto err_out;
-		}
-		magic = id->driver_data;
-		chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
-		magic >>= AT24_SIZE_BYTELEN;
-		chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
-		/*
-		 * This is slow, but we can't know all eeproms, so we better
-		 * play safe. Specifying custom eeprom-types via platform_data
-		 * is recommended anyhow.
-		 */
-		chip.page_size = 1;
-	}
-
-	if (!is_power_of_2(chip.byte_len))
-		dev_warn(&client->dev,
-			"byte_len looks suspicious (no power of 2)!\n");
-	if (!is_power_of_2(chip.page_size))
-		dev_warn(&client->dev,
-			"page_size looks suspicious (no power of 2)!\n");
-
-	/* Use I2C operations unless we're stuck with SMBus extensions. */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		if (chip.flags & AT24_FLAG_ADDR16) {
-			err = -EPFNOSUPPORT;
-			goto err_out;
-		}
-		if (!i2c_check_functionality(client->adapter,
-				I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
-			err = -EPFNOSUPPORT;
-			goto err_out;
-		}
-		use_smbus = true;
-	}
-
-	if (chip.flags & AT24_FLAG_TAKE8ADDR)
-		num_addresses = 8;
-	else
-		num_addresses =	DIV_ROUND_UP(chip.byte_len,
-			(chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
-
-	at24 = kzalloc(sizeof(struct at24_data) +
-		num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
-	if (!at24) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-
-	mutex_init(&at24->lock);
-	at24->use_smbus = use_smbus;
-	at24->chip = chip;
-	at24->num_addresses = num_addresses;
-
-	/*
-	 * Export the EEPROM bytes through sysfs, since that's convenient.
-	 * By default, only root should see the data (maybe passwords etc)
-	 */
-	at24->bin.attr.name = "eeprom";
-	at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
-	at24->bin.read = at24_bin_read;
-	at24->bin.size = chip.byte_len;
-
-	writable = !(chip.flags & AT24_FLAG_READONLY);
-	if (writable) {
-		if (!use_smbus || i2c_check_functionality(client->adapter,
-				I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
-
-			unsigned write_max = chip.page_size;
-
-			at24->bin.write = at24_bin_write;
-			at24->bin.attr.mode |= S_IWUSR;
-
-			if (write_max > io_limit)
-				write_max = io_limit;
-			if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
-				write_max = I2C_SMBUS_BLOCK_MAX;
-			at24->write_max = write_max;
-
-			/* buffer (data + address at the beginning) */
-			at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
-			if (!at24->writebuf) {
-				err = -ENOMEM;
-				goto err_struct;
-			}
-		} else {
-			dev_warn(&client->dev,
-				"cannot write due to controller restrictions.");
-		}
-	}
-
-	at24->client[0] = client;
-
-	/* use dummy devices for multiple-address chips */
-	for (i = 1; i < num_addresses; i++) {
-		at24->client[i] = i2c_new_dummy(client->adapter,
-					client->addr + i);
-		if (!at24->client[i]) {
-			dev_err(&client->dev, "address 0x%02x unavailable\n",
-					client->addr + i);
-			err = -EADDRINUSE;
-			goto err_clients;
-		}
-	}
-
-	err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
-	if (err)
-		goto err_clients;
-
-	i2c_set_clientdata(client, at24);
-
-	dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
-		at24->bin.size, client->name,
-		writable ? "(writable)" : "(read-only)");
-	dev_dbg(&client->dev,
-		"page_size %d, num_addresses %d, write_max %d%s\n",
-		chip.page_size, num_addresses,
-		at24->write_max,
-		use_smbus ? ", use_smbus" : "");
-
-	return 0;
-
-err_clients:
-	for (i = 1; i < num_addresses; i++)
-		if (at24->client[i])
-			i2c_unregister_device(at24->client[i]);
-
-	kfree(at24->writebuf);
-err_struct:
-	kfree(at24);
-err_out:
-	dev_dbg(&client->dev, "probe error %d\n", err);
-	return err;
-}
-
-static int __devexit at24_remove(struct i2c_client *client)
-{
-	struct at24_data *at24;
-	int i;
-
-	at24 = i2c_get_clientdata(client);
-	sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
-
-	for (i = 1; i < at24->num_addresses; i++)
-		i2c_unregister_device(at24->client[i]);
-
-	kfree(at24->writebuf);
-	kfree(at24);
-	i2c_set_clientdata(client, NULL);
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct i2c_driver at24_driver = {
-	.driver = {
-		.name = "at24",
-		.owner = THIS_MODULE,
-	},
-	.probe = at24_probe,
-	.remove = __devexit_p(at24_remove),
-	.id_table = at24_ids,
-};
-
-static int __init at24_init(void)
-{
-	io_limit = rounddown_pow_of_two(io_limit);
-	return i2c_add_driver(&at24_driver);
-}
-module_init(at24_init);
-
-static void __exit at24_exit(void)
-{
-	i2c_del_driver(&at24_driver);
-}
-module_exit(at24_exit);
-
-MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
-MODULE_AUTHOR("David Brownell and Wolfram Sang");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
deleted file mode 100644
index 2c27193aeaa0..000000000000
--- a/drivers/i2c/chips/eeprom.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
-    Copyright (C) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
-			       Philip Edelbrock <phil@netroedge.com>
-    Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
-    Copyright (C) 2003 IBM Corp.
-    Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
-					0x55, 0x56, 0x57, I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(eeprom);
-
-
-/* Size of EEPROM in bytes */
-#define EEPROM_SIZE		256
-
-/* possible types of eeprom devices */
-enum eeprom_nature {
-	UNKNOWN,
-	VAIO,
-};
-
-/* Each client has this additional data */
-struct eeprom_data {
-	struct mutex update_lock;
-	u8 valid;			/* bitfield, bit!=0 if slice is valid */
-	unsigned long last_updated[8];	/* In jiffies, 8 slices */
-	u8 data[EEPROM_SIZE];		/* Register values */
-	enum eeprom_nature nature;
-};
-
-
-static void eeprom_update_client(struct i2c_client *client, u8 slice)
-{
-	struct eeprom_data *data = i2c_get_clientdata(client);
-	int i;
-
-	mutex_lock(&data->update_lock);
-
-	if (!(data->valid & (1 << slice)) ||
-	    time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
-		dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
-
-		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
-			for (i = slice << 5; i < (slice + 1) << 5; i += 32)
-				if (i2c_smbus_read_i2c_block_data(client, i,
-							32, data->data + i)
-							!= 32)
-					goto exit;
-		} else {
-			for (i = slice << 5; i < (slice + 1) << 5; i += 2) {
-				int word = i2c_smbus_read_word_data(client, i);
-				if (word < 0)
-					goto exit;
-				data->data[i] = word & 0xff;
-				data->data[i + 1] = word >> 8;
-			}
-		}
-		data->last_updated[slice] = jiffies;
-		data->valid |= (1 << slice);
-	}
-exit:
-	mutex_unlock(&data->update_lock);
-}
-
-static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
-			   char *buf, loff_t off, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
-	struct eeprom_data *data = i2c_get_clientdata(client);
-	u8 slice;
-
-	if (off > EEPROM_SIZE)
-		return 0;
-	if (off + count > EEPROM_SIZE)
-		count = EEPROM_SIZE - off;
-
-	/* Only refresh slices which contain requested bytes */
-	for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
-		eeprom_update_client(client, slice);
-
-	/* Hide Vaio private settings to regular users:
-	   - BIOS passwords: bytes 0x00 to 0x0f
-	   - UUID: bytes 0x10 to 0x1f
-	   - Serial number: 0xc0 to 0xdf */
-	if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
-		int i;
-
-		for (i = 0; i < count; i++) {
-			if ((off + i <= 0x1f) ||
-			    (off + i >= 0xc0 && off + i <= 0xdf))
-				buf[i] = 0;
-			else
-				buf[i] = data->data[off + i];
-		}
-	} else {
-		memcpy(buf, &data->data[off], count);
-	}
-
-	return count;
-}
-
-static struct bin_attribute eeprom_attr = {
-	.attr = {
-		.name = "eeprom",
-		.mode = S_IRUGO,
-	},
-	.size = EEPROM_SIZE,
-	.read = eeprom_read,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int eeprom_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	/* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
-	   addresses 0x50-0x57, but we only care about 0x50. So decline
-	   attaching to addresses >= 0x51 on DDC buses */
-	if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
-		return -ENODEV;
-
-	/* There are four ways we can read the EEPROM data:
-	   (1) I2C block reads (faster, but unsupported by most adapters)
-	   (2) Word reads (128% overhead)
-	   (3) Consecutive byte reads (88% overhead, unsafe)
-	   (4) Regular byte data reads (265% overhead)
-	   The third and fourth methods are not implemented by this driver
-	   because all known adapters support one of the first two. */
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
-	 && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		return -ENODEV;
-
-	strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int eeprom_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct i2c_adapter *adapter = client->adapter;
-	struct eeprom_data *data;
-	int err;
-
-	if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	memset(data->data, 0xff, EEPROM_SIZE);
-	i2c_set_clientdata(client, data);
-	mutex_init(&data->update_lock);
-	data->nature = UNKNOWN;
-
-	/* Detect the Vaio nature of EEPROMs.
-	   We use the "PCG-" or "VGN-" prefix as the signature. */
-	if (client->addr == 0x57
-	 && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
-		char name[4];
-
-		name[0] = i2c_smbus_read_byte_data(client, 0x80);
-		name[1] = i2c_smbus_read_byte_data(client, 0x81);
-		name[2] = i2c_smbus_read_byte_data(client, 0x82);
-		name[3] = i2c_smbus_read_byte_data(client, 0x83);
-
-		if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
-			dev_info(&client->dev, "Vaio EEPROM detected, "
-				 "enabling privacy protection\n");
-			data->nature = VAIO;
-		}
-	}
-
-	/* create the sysfs eeprom file */
-	err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
-	if (err)
-		goto exit_kfree;
-
-	return 0;
-
-exit_kfree:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int eeprom_remove(struct i2c_client *client)
-{
-	sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
-	kfree(i2c_get_clientdata(client));
-
-	return 0;
-}
-
-static const struct i2c_device_id eeprom_id[] = {
-	{ "eeprom", 0 },
-	{ }
-};
-
-static struct i2c_driver eeprom_driver = {
-	.driver = {
-		.name	= "eeprom",
-	},
-	.probe		= eeprom_probe,
-	.remove		= eeprom_remove,
-	.id_table	= eeprom_id,
-
-	.class		= I2C_CLASS_DDC | I2C_CLASS_SPD,
-	.detect		= eeprom_detect,
-	.address_data	= &addr_data,
-};
-
-static int __init eeprom_init(void)
-{
-	return i2c_add_driver(&eeprom_driver);
-}
-
-static void __exit eeprom_exit(void)
-{
-	i2c_del_driver(&eeprom_driver);
-}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
-		"Philip Edelbrock <phil@netroedge.com> and "
-		"Greg Kroah-Hartman <greg@kroah.com>");
-MODULE_DESCRIPTION("I2C EEPROM driver");
-MODULE_LICENSE("GPL");
-
-module_init(eeprom_init);
-module_exit(eeprom_exit);
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c
deleted file mode 100644
index 82a9bcb858b6..000000000000
--- a/drivers/i2c/chips/mcu_mpc8349emitx.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU
- *
- * Copyright (c) 2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-
-/*
- * I don't have specifications for the MCU firmware, I found this register
- * and bits positions by the trial&error method.
- */
-#define MCU_REG_CTRL	0x20
-#define MCU_CTRL_POFF	0x40
-
-#define MCU_NUM_GPIO	2
-
-struct mcu {
-	struct mutex lock;
-	struct device_node *np;
-	struct i2c_client *client;
-	struct of_gpio_chip of_gc;
-	u8 reg_ctrl;
-};
-
-static struct mcu *glob_mcu;
-
-static void mcu_power_off(void)
-{
-	struct mcu *mcu = glob_mcu;
-
-	pr_info("Sending power-off request to the MCU...\n");
-	mutex_lock(&mcu->lock);
-	i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
-				  mcu->reg_ctrl | MCU_CTRL_POFF);
-	mutex_unlock(&mcu->lock);
-}
-
-static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
-	struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
-	u8 bit = 1 << (4 + gpio);
-
-	mutex_lock(&mcu->lock);
-	if (val)
-		mcu->reg_ctrl &= ~bit;
-	else
-		mcu->reg_ctrl |= bit;
-
-	i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl);
-	mutex_unlock(&mcu->lock);
-}
-
-static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	mcu_gpio_set(gc, gpio, val);
-	return 0;
-}
-
-static int mcu_gpiochip_add(struct mcu *mcu)
-{
-	struct device_node *np;
-	struct of_gpio_chip *of_gc = &mcu->of_gc;
-	struct gpio_chip *gc = &of_gc->gc;
-	int ret;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
-	if (!np)
-		return -ENODEV;
-
-	gc->owner = THIS_MODULE;
-	gc->label = np->full_name;
-	gc->can_sleep = 1;
-	gc->ngpio = MCU_NUM_GPIO;
-	gc->base = -1;
-	gc->set = mcu_gpio_set;
-	gc->direction_output = mcu_gpio_dir_out;
-	of_gc->gpio_cells = 2;
-	of_gc->xlate = of_gpio_simple_xlate;
-
-	np->data = of_gc;
-	mcu->np = np;
-
-	/*
-	 * We don't want to lose the node, its ->data and ->full_name...
-	 * So, if succeeded, we don't put the node here.
-	 */
-	ret = gpiochip_add(gc);
-	if (ret)
-		of_node_put(np);
-	return ret;
-}
-
-static int mcu_gpiochip_remove(struct mcu *mcu)
-{
-	int ret;
-
-	ret = gpiochip_remove(&mcu->of_gc.gc);
-	if (ret)
-		return ret;
-	of_node_put(mcu->np);
-
-	return 0;
-}
-
-static int __devinit mcu_probe(struct i2c_client *client,
-			       const struct i2c_device_id *id)
-{
-	struct mcu *mcu;
-	int ret;
-
-	mcu = kzalloc(sizeof(*mcu), GFP_KERNEL);
-	if (!mcu)
-		return -ENOMEM;
-
-	mutex_init(&mcu->lock);
-	mcu->client = client;
-	i2c_set_clientdata(client, mcu);
-
-	ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
-	if (ret < 0)
-		goto err;
-	mcu->reg_ctrl = ret;
-
-	ret = mcu_gpiochip_add(mcu);
-	if (ret)
-		goto err;
-
-	/* XXX: this is potentially racy, but there is no lock for ppc_md */
-	if (!ppc_md.power_off) {
-		glob_mcu = mcu;
-		ppc_md.power_off = mcu_power_off;
-		dev_info(&client->dev, "will provide power-off service\n");
-	}
-
-	return 0;
-err:
-	kfree(mcu);
-	return ret;
-}
-
-static int __devexit mcu_remove(struct i2c_client *client)
-{
-	struct mcu *mcu = i2c_get_clientdata(client);
-	int ret;
-
-	if (glob_mcu == mcu) {
-		ppc_md.power_off = NULL;
-		glob_mcu = NULL;
-	}
-
-	ret = mcu_gpiochip_remove(mcu);
-	if (ret)
-		return ret;
-	i2c_set_clientdata(client, NULL);
-	kfree(mcu);
-	return 0;
-}
-
-static const struct i2c_device_id mcu_ids[] = {
-	{ "mcu-mpc8349emitx", },
-	{},
-};
-MODULE_DEVICE_TABLE(i2c, mcu_ids);
-
-static struct i2c_driver mcu_driver = {
-	.driver = {
-		.name = "mcu-mpc8349emitx",
-		.owner = THIS_MODULE,
-	},
-	.probe = mcu_probe,
-	.remove	= __devexit_p(mcu_remove),
-	.id_table = mcu_ids,
-};
-
-static int __init mcu_init(void)
-{
-	return i2c_add_driver(&mcu_driver);
-}
-module_init(mcu_init);
-
-static void __exit mcu_exit(void)
-{
-	i2c_del_driver(&mcu_driver);
-}
-module_exit(mcu_exit);
-
-MODULE_DESCRIPTION("Power Management and GPIO expander driver for "
-		   "MPC8349E-mITX-compatible MCU");
-MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
-MODULE_LICENSE("GPL");