summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorStig Telfer <stig@lizardlogic.co.uk>2005-10-08 00:21:48 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2005-10-28 14:02:10 -0700
commit3634ff6a32e90d9db0ec19297e80059143c1aa7f (patch)
treec07cf34e839b70d9ab1c604b179943b199d542f3 /drivers/i2c
parent00bffb6e29c5ef12cea7904905f8b959187076c9 (diff)
downloadblackbird-op-linux-3634ff6a32e90d9db0ec19297e80059143c1aa7f.tar.gz
blackbird-op-linux-3634ff6a32e90d9db0ec19297e80059143c1aa7f.zip
[PATCH] i2c: Fix i2c-elektor on Alpha
This patch updates the i2c-elektor driver, enabling it to compile cleanly, load and run. The key change is that it uses the new __iomem/iowrite8/ioread8 functions to abstract the direct or memory-mapped variants of register access. Also, the original driver would crash on module load on the Alpha because the PCI memory region was not remapped into kernel memory. I have managed the following testing: * compiled and tested it on my Alpha UP2000+ system. * compiles cleanly for x86 but I don't have the hardware to test. Signed-off-by: Stig Telfer <stig@lizardlogic.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-elektor.c74
1 files changed, 49 insertions, 25 deletions
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 6930b660e508..75b4b442a636 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -46,6 +46,8 @@
#define DEFAULT_BASE 0x330
static int base;
+static u8 __iomem *base_iomem;
+
static int irq;
static int clock = 0x1c;
static int own = 0x55;
@@ -64,36 +66,27 @@ static spinlock_t lock;
static void pcf_isa_setbyte(void *data, int ctl, int val)
{
- int address = ctl ? (base + 1) : base;
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
/* enable irq if any specified for serial operation */
if (ctl && irq && (val & I2C_PCF_ESO)) {
val |= I2C_PCF_ENI;
}
- pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
-
- switch (mmapped) {
- case 0: /* regular I/O */
- outb(val, address);
- break;
- case 2: /* double mapped I/O needed for UP2000 board,
- I don't know why this... */
- writeb(val, (void *)address);
- /* fall */
- case 1: /* memory mapped I/O */
- writeb(val, (void *)address);
- break;
- }
+ pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val);
+ iowrite8(val, address);
+#ifdef __alpha__
+ /* API UP2000 needs some hardware fudging to make the write stick */
+ iowrite8(val, address);
+#endif
}
static int pcf_isa_getbyte(void *data, int ctl)
{
- int address = ctl ? (base + 1) : base;
- int val = mmapped ? readb((void *)address) : inb(address);
-
- pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+ int val = ioread8(address);
+ pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val);
return (val);
}
@@ -155,7 +148,30 @@ static int pcf_isa_init(void)
"is in use.\n", base);
return -ENODEV;
}
+ base_iomem = ioport_map(base, 2);
+ if (!base_iomem) {
+ printk(KERN_ERR "i2c-elektor: remap of I/O region "
+ "%#x failed\n", base);
+ release_region(base, 2);
+ return -ENODEV;
+ }
+ } else {
+ if (!request_mem_region(base, 2, "i2c-elektor")) {
+ printk(KERN_ERR "i2c-elektor: requested memory region "
+ "(%#x:2) is in use\n", base);
+ return -ENODEV;
+ }
+ base_iomem = ioremap(base, 2);
+ if (base_iomem == NULL) {
+ printk(KERN_ERR "i2c-elektor: remap of memory region "
+ "%#x failed\n", base);
+ release_mem_region(base, 2);
+ return -ENODEV;
+ }
}
+ pr_debug("i2c-elektor: registers %#x remapped to %p\n", base,
+ base_iomem);
+
if (irq > 0) {
if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
@@ -200,7 +216,7 @@ static int __init i2c_pcfisa_init(void)
cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
PCI_DEVICE_ID_CONTAQ_82C693, NULL);
if (cy693_dev) {
- char config;
+ unsigned char config;
/* yeap, we've found cypress, let's check config */
if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
@@ -219,9 +235,7 @@ static int __init i2c_pcfisa_init(void)
if ((config & 0x7f) == 0x61) {
/* seems to be UP2000 like board */
base = 0xe0000;
- /* I don't know why we need to
- write twice */
- mmapped = 2;
+ mmapped = 1;
/* UP2000 drives ISA with
8.25 MHz (PCI/4) clock
(this can be read from cypress) */
@@ -262,8 +276,13 @@ static int __init i2c_pcfisa_init(void)
free_irq(irq, NULL);
}
- if (!mmapped)
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
release_region(base , 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
return -ENODEV;
}
@@ -276,8 +295,13 @@ static void i2c_pcfisa_exit(void)
free_irq(irq, NULL);
}
- if (!mmapped)
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
release_region(base , 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
}
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
OpenPOWER on IntegriCloud