diff options
| author | Jean Delvare <khali@linux-fr.org> | 2009-12-09 20:35:47 +0100 |
|---|---|---|
| committer | Jean Delvare <khali@linux-fr.org> | 2009-12-09 20:35:47 +0100 |
| commit | 895ff267686663afa894314b749d23ac2867434a (patch) | |
| tree | 01e16fe1eef64fcf175853f88cefc04400148e42 /drivers/hwmon/it87.c | |
| parent | f7290e24e3ce8a0b4b39a74800fd341b6b7a6f47 (diff) | |
| download | blackbird-op-linux-895ff267686663afa894314b749d23ac2867434a.tar.gz blackbird-op-linux-895ff267686663afa894314b749d23ac2867434a.zip | |
hwmon: (it87) Verify the VID pin usage
The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Adam Nielsen <a.nielsen@shikadi.net>
Diffstat (limited to 'drivers/hwmon/it87.c')
| -rw-r--r-- | drivers/hwmon/it87.c | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index a3749cb0f181..2f782e3f9a2b 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -124,6 +124,7 @@ superio_exit(void) #define IT87_BASE_REG 0x60 /* Logical device 7 registers (IT8712F and later) */ +#define IT87_SIO_GPIO3_REG 0x27 #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ #define IT87_SIO_VID_REG 0xfc /* VID value */ @@ -244,6 +245,7 @@ struct it87_sio_data { /* Values read from Super-I/O config space */ u8 revision; u8 vid_value; + u8 skip_vid; /* Values set based on DMI strings */ u8 skip_pwm; }; @@ -1028,11 +1030,22 @@ static int __init it87_find(unsigned short *address, chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ - if (sio_data->type != it87) { + if (sio_data->type == it87) { + /* The IT8705F doesn't have VID pins at all */ + sio_data->skip_vid = 1; + } else { int reg; superio_select(GPIO); - if (sio_data->type == it8718 || sio_data->type == it8720) + /* We need at least 4 VID pins */ + reg = superio_inb(IT87_SIO_GPIO3_REG); + if (reg & 0x0f) { + pr_info("it87: VID is disabled (pins used for GPIO)\n"); + sio_data->skip_vid = 1; + } + + if ((sio_data->type == it8718 || sio_data->type == it8720) + && !(sio_data->skip_vid)) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); @@ -1236,8 +1249,7 @@ static int __devinit it87_probe(struct platform_device *pdev) } } - if (data->type == it8712 || data->type == it8716 - || data->type == it8718 || data->type == it8720) { + if (!sio_data->skip_vid) { data->vrm = vid_which_vrm(); /* VID reading from Super-I/O config space if available */ data->vid = sio_data->vid_value; |
