Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull, it has a shared branch with some alsa
  crossover but everything should be acked by relevant people.

  New drivers:
     - ATMEL HLCDC driver
     - designware HDMI core support (used in multiple SoCs).

  core:
     - lots more atomic modesetting work, properties and atomic ioctl
       (hidden under option)
     - bridge rework allows support for Samsung exynos chromebooks to
       work finally.
     - some more panels supported

  i915:
     - atomic plane update support
     - DSI uses shared DSI infrastructure
     - Skylake basic support is all merged now
     - component framework used for i915/snd-hda interactions
     - write-combine cpu memory mappings
     - engine init code refactored
     - full ppgtt enabled where execlists are enabled.
     - cherryview rps/gpu turbo and pipe CRC support.

  radeon:
     - indirect draw support for evergreen/cayman
     - SMC and manual fan control for SI/CI
     - Displayport audio support

  amdkfd:
     - SDMA usermode queue support
     - replace suballocator usage with more suitable one
     - rework for allowing interfacing to more than radeon

  nouveau:
     - major renaming in prep for later splitting work
     - merge arm platform driver into nouveau
     - GK20A reclocking support

  msm:
     - conversion to atomic modesetting
     - YUV support for mdp4/5
     - eDP support
     - hw cursor for mdp5

  tegra:
     - conversion to atomic modesetting
     - better suspend/resume support for child devices

  rcar-du:
     - interlaced support

  imx:
     - move to using dw_hdmi shared support
     - mode_fixup support

  sti:
     - DVO support
     - HDMI infoframe support

  exynos:
     - refactoring and cleanup, removed lots of internal unnecessary
       abstraction
     - exynos7 DECON display controller support

  Along with the usual bunch of fixes, cleanups etc"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
  drm/radeon: fix voltage setup on hawaii
  drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
  drm/radeon: only enable kv/kb dpm interrupts once v3
  drm/radeon: workaround for CP HW bug on CIK
  drm/radeon: Don't try to enable write-combining without PAT
  drm/radeon: use 0-255 rather than 0-100 for pwm fan range
  drm/i915: Clamp efficient frequency to valid range
  drm/i915: Really ignore long HPD pulses on eDP
  drm/exynos: Add DECON driver
  drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
  drm/i915: Insert a command barrier on BLT/BSD cache flushes
  drm/i915: Drop vblank wait from intel_dp_link_down
  drm/exynos: fix NULL pointer reference
  drm/exynos: remove exynos_plane_dpms
  drm/exynos: remove mode property of exynos crtc
  drm/exynos: Remove exynos_plane_dpms() call with no effect
  drm/i915: Squelch overzealous uncore reset WARN_ON
  drm/i915: Take runtime pm reference on hangcheck_info
  drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
  drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
  ...

1 files changed, 74 insertions, 47 deletions

diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index c490ba4384fc..b61d6be97602 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -207,10 +207,10 @@ static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
 static void ipu_di_sync_config_interlaced(struct ipu_di *di,
 		struct ipu_di_signal_cfg *sig)
 {
-	u32 h_total = sig->width + sig->h_sync_width +
-		sig->h_start_width + sig->h_end_width;
-	u32 v_total = sig->height + sig->v_sync_width +
-		sig->v_start_width + sig->v_end_width;
+	u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
+		sig->mode.hback_porch + sig->mode.hfront_porch;
+	u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
+		sig->mode.vback_porch + sig->mode.vfront_porch;
 	u32 reg;
 	struct di_sync_config cfg[] = {
 		{
@@ -229,13 +229,13 @@ static void ipu_di_sync_config_interlaced(struct ipu_di *di,
 		}, {
 			.run_count = v_total / 2 - 1,
 			.run_src = DI_SYNC_HSYNC,
-			.offset_count = sig->v_start_width,
+			.offset_count = sig->mode.vback_porch,
 			.offset_src = DI_SYNC_HSYNC,
 			.repeat_count = 2,
 			.cnt_clr_src = DI_SYNC_VSYNC,
 		}, {
 			.run_src = DI_SYNC_HSYNC,
-			.repeat_count = sig->height / 2,
+			.repeat_count = sig->mode.vactive / 2,
 			.cnt_clr_src = 4,
 		}, {
 			.run_count = v_total - 1,
@@ -249,9 +249,9 @@ static void ipu_di_sync_config_interlaced(struct ipu_di *di,
 			.cnt_clr_src = DI_SYNC_VSYNC,
 		}, {
 			.run_src = DI_SYNC_CLK,
-			.offset_count = sig->h_start_width,
+			.offset_count = sig->mode.hback_porch,
 			.offset_src = DI_SYNC_CLK,
-			.repeat_count = sig->width,
+			.repeat_count = sig->mode.hactive,
 			.cnt_clr_src = 5,
 		}, {
 			.run_count = v_total - 1,
@@ -277,10 +277,10 @@ static void ipu_di_sync_config_interlaced(struct ipu_di *di,
 static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 		struct ipu_di_signal_cfg *sig, int div)
 {
-	u32 h_total = sig->width + sig->h_sync_width + sig->h_start_width +
-		sig->h_end_width;
-	u32 v_total = sig->height + sig->v_sync_width + sig->v_start_width +
-		sig->v_end_width;
+	u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
+		sig->mode.hback_porch + sig->mode.hfront_porch;
+	u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
+		sig->mode.vback_porch + sig->mode.vfront_porch;
 	struct di_sync_config cfg[] = {
 		{
 			/* 1: INT_HSYNC */
@@ -294,27 +294,29 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 			.offset_src = DI_SYNC_CLK,
 			.cnt_polarity_gen_en = 1,
 			.cnt_polarity_trigger_src = DI_SYNC_CLK,
-			.cnt_down = sig->h_sync_width * 2,
+			.cnt_down = sig->mode.hsync_len * 2,
 		} , {
 			/* PIN3: VSYNC */
 			.run_count = v_total - 1,
 			.run_src = DI_SYNC_INT_HSYNC,
 			.cnt_polarity_gen_en = 1,
 			.cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
-			.cnt_down = sig->v_sync_width * 2,
+			.cnt_down = sig->mode.vsync_len * 2,
 		} , {
 			/* 4: Line Active */
 			.run_src = DI_SYNC_HSYNC,
-			.offset_count = sig->v_sync_width + sig->v_start_width,
+			.offset_count = sig->mode.vsync_len +
+					sig->mode.vback_porch,
 			.offset_src = DI_SYNC_HSYNC,
-			.repeat_count = sig->height,
+			.repeat_count = sig->mode.vactive,
 			.cnt_clr_src = DI_SYNC_VSYNC,
 		} , {
 			/* 5: Pixel Active, referenced by DC */
 			.run_src = DI_SYNC_CLK,
-			.offset_count = sig->h_sync_width + sig->h_start_width,
+			.offset_count = sig->mode.hsync_len +
+					sig->mode.hback_porch,
 			.offset_src = DI_SYNC_CLK,
-			.repeat_count = sig->width,
+			.repeat_count = sig->mode.hactive,
 			.cnt_clr_src = 5, /* Line Active */
 		} , {
 			/* unused */
@@ -339,9 +341,10 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 		} , {
 			/* 3: Line Active */
 			.run_src = DI_SYNC_INT_HSYNC,
-			.offset_count = sig->v_sync_width + sig->v_start_width,
+			.offset_count = sig->mode.vsync_len +
+					sig->mode.vback_porch,
 			.offset_src = DI_SYNC_INT_HSYNC,
-			.repeat_count = sig->height,
+			.repeat_count = sig->mode.vactive,
 			.cnt_clr_src = 3 /* VSYNC */,
 		} , {
 			/* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
@@ -351,13 +354,14 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 			.offset_src = DI_SYNC_CLK,
 			.cnt_polarity_gen_en = 1,
 			.cnt_polarity_trigger_src = DI_SYNC_CLK,
-			.cnt_down = sig->h_sync_width * 2,
+			.cnt_down = sig->mode.hsync_len * 2,
 		} , {
 			/* 5: Pixel Active signal to DC */
 			.run_src = DI_SYNC_CLK,
-			.offset_count = sig->h_sync_width + sig->h_start_width,
+			.offset_count = sig->mode.hsync_len +
+					sig->mode.hback_porch,
 			.offset_src = DI_SYNC_CLK,
-			.repeat_count = sig->width,
+			.repeat_count = sig->mode.hactive,
 			.cnt_clr_src = 4, /* Line Active */
 		} , {
 			/* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
@@ -367,7 +371,7 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 			.offset_src = DI_SYNC_INT_HSYNC,
 			.cnt_polarity_gen_en = 1,
 			.cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
-			.cnt_down = sig->v_sync_width * 2,
+			.cnt_down = sig->mode.vsync_len * 2,
 		} , {
 			/* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
 			.run_count = h_total - 1,
@@ -376,7 +380,7 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 			.offset_src = DI_SYNC_CLK,
 			.cnt_polarity_gen_en = 1,
 			.cnt_polarity_trigger_src = DI_SYNC_CLK,
-			.cnt_down = sig->h_sync_width * 2,
+			.cnt_down = sig->mode.hsync_len * 2,
 		} , {
 			/* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
 			.run_count = v_total - 1,
@@ -385,7 +389,7 @@ static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
 			.offset_src = DI_SYNC_INT_HSYNC,
 			.cnt_polarity_gen_en = 1,
 			.cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
-			.cnt_down = sig->v_sync_width * 2,
+			.cnt_down = sig->mode.vsync_len * 2,
 		} , {
 			/* unused */
 		},
@@ -433,10 +437,10 @@ static void ipu_di_config_clock(struct ipu_di *di,
 			unsigned long in_rate;
 			unsigned div;
 
-			clk_set_rate(clk, sig->pixelclock);
+			clk_set_rate(clk, sig->mode.pixelclock);
 
 			in_rate = clk_get_rate(clk);
-			div = (in_rate + sig->pixelclock / 2) / sig->pixelclock;
+			div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
 			if (div == 0)
 				div = 1;
 
@@ -454,10 +458,10 @@ static void ipu_di_config_clock(struct ipu_di *di,
 		unsigned div, error;
 
 		clkrate = clk_get_rate(di->clk_ipu);
-		div = (clkrate + sig->pixelclock / 2) / sig->pixelclock;
+		div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
 		rate = clkrate / div;
 
-		error = rate / (sig->pixelclock / 1000);
+		error = rate / (sig->mode.pixelclock / 1000);
 
 		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %d.%u%%\n",
 			rate, div, (signed)(error - 1000) / 10, error % 10);
@@ -473,10 +477,10 @@ static void ipu_di_config_clock(struct ipu_di *di,
 
 			clk = di->clk_di;
 
-			clk_set_rate(clk, sig->pixelclock);
+			clk_set_rate(clk, sig->mode.pixelclock);
 
 			in_rate = clk_get_rate(clk);
-			div = (in_rate + sig->pixelclock / 2) / sig->pixelclock;
+			div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
 			if (div == 0)
 				div = 1;
 
@@ -504,35 +508,58 @@ static void ipu_di_config_clock(struct ipu_di *di,
 	ipu_di_write(di, val, DI_GENERAL);
 
 	dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
-		sig->pixelclock,
+		sig->mode.pixelclock,
 		clk_get_rate(di->clk_ipu),
 		clk_get_rate(di->clk_di),
 		clk == di->clk_di ? "DI" : "IPU",
 		clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
 }
 
+/*
+ * This function is called to adjust a video mode to IPU restrictions.
+ * It is meant to be called from drm crtc mode_fixup() methods.
+ */
+int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
+{
+	u32 diff;
+
+	if (mode->vfront_porch >= 2)
+		return 0;
+
+	diff = 2 - mode->vfront_porch;
+
+	if (mode->vback_porch >= diff) {
+		mode->vfront_porch = 2;
+		mode->vback_porch -= diff;
+	} else if (mode->vsync_len > diff) {
+		mode->vfront_porch = 2;
+		mode->vsync_len = mode->vsync_len - diff;
+	} else {
+		dev_warn(di->ipu->dev, "failed to adjust videomode\n");
+		return -EINVAL;
+	}
+
+	dev_warn(di->ipu->dev, "videomode adapted for IPU restrictions\n");
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);
+
 int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 {
 	u32 reg;
 	u32 di_gen, vsync_cnt;
 	u32 div;
-	u32 h_total, v_total;
 
 	dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
-		di->id, sig->width, sig->height);
+		di->id, sig->mode.hactive, sig->mode.vactive);
 
-	if ((sig->v_sync_width == 0) || (sig->h_sync_width == 0))
+	if ((sig->mode.vsync_len == 0) || (sig->mode.hsync_len == 0))
 		return -EINVAL;
 
-	h_total = sig->width + sig->h_sync_width + sig->h_start_width +
-		sig->h_end_width;
-	v_total = sig->height + sig->v_sync_width + sig->v_start_width +
-		sig->v_end_width;
-
 	dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
 		clk_get_rate(di->clk_ipu),
 		clk_get_rate(di->clk_di),
-		sig->pixelclock);
+		sig->mode.pixelclock);
 
 	mutex_lock(&di_mutex);
 
@@ -551,7 +578,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 	di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
 	di_gen |= DI_GEN_DI_VSYNC_EXT;
 
-	if (sig->interlaced) {
+	if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
 		ipu_di_sync_config_interlaced(di, sig);
 
 		/* set y_sel = 1 */
@@ -561,9 +588,9 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 
 		vsync_cnt = 7;
 
-		if (sig->Hsync_pol)
+		if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
 			di_gen |= DI_GEN_POLARITY_3;
-		if (sig->Vsync_pol)
+		if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
 			di_gen |= DI_GEN_POLARITY_2;
 	} else {
 		ipu_di_sync_config_noninterlaced(di, sig, div);
@@ -577,7 +604,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 			if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
 				vsync_cnt = 6;
 
-		if (sig->Hsync_pol) {
+		if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH) {
 			if (sig->hsync_pin == 2)
 				di_gen |= DI_GEN_POLARITY_2;
 			else if (sig->hsync_pin == 4)
@@ -585,7 +612,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
 			else if (sig->hsync_pin == 7)
 				di_gen |= DI_GEN_POLARITY_7;
 		}
-		if (sig->Vsync_pol) {
+		if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH) {
 			if (sig->vsync_pin == 3)
 				di_gen |= DI_GEN_POLARITY_3;
 			else if (sig->vsync_pin == 6)