drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV

On CHV the display DDC pins may be muxed to an alternate function if
there's no need for DDC on a specific port, which is the case for eDP
ports since there's no way to plug in a DP++ HDMI dongle.

This causes problems when trying to determine if the port is present
since the the DP_DETECTED bit is the latched state of the DDC SDA pin
at boot. If the DDC pins are muxed to an alternate function the bit
may indicate that the port isn't present.

To work around this look at the VBT as well as the DP_DETECTED bit
to determine if we should attempt registering an eDP port. Do this
only for ports B and C since port D doesn't support eDP (no PPS/BLC).

In theory someone could also wire up a normal DP port w/o DDC lines.
That would just mean that simple DP++ HDMI dongles wouldn't work
on such a port. With this change we would still fail to register
such DP ports. But let's hope no one wires their board in such a way,
and if they do we can extend the VBT checks to cover normal DP ports
as well.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84265
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

1 files changed, 21 insertions, 12 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6a0cc367934d..c9e220963a78 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12354,27 +12354,36 @@ static void intel_setup_outputs(struct drm_device *dev)
 		if (I915_READ(PCH_DP_D) & DP_DETECTED)
 			intel_dp_init(dev, PCH_DP_D, PORT_D);
 	} else if (IS_VALLEYVIEW(dev)) {
-		if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
+		/*
+		 * The DP_DETECTED bit is the latched state of the DDC
+		 * SDA pin at boot. However since eDP doesn't require DDC
+		 * (no way to plug in a DP->HDMI dongle) the DDC pins for
+		 * eDP ports may have been muxed to an alternate function.
+		 * Thus we can't rely on the DP_DETECTED bit alone to detect
+		 * eDP ports. Consult the VBT as well as DP_DETECTED to
+		 * detect eDP ports.
+		 */
+		if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED)
 			intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
 					PORT_B);
-			if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
-				intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
-		}
+		if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED ||
+		    intel_dp_is_edp(dev, PORT_B))
+			intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
 
-		if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) {
+		if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED)
 			intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
 					PORT_C);
-			if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
-				intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
-		}
+		if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED ||
+		    intel_dp_is_edp(dev, PORT_C))
+			intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
 
 		if (IS_CHERRYVIEW(dev)) {
-			if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED) {
+			if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED)
 				intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID,
 						PORT_D);
-				if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
-					intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
-			}
+			/* eDP not supported on port D, so don't check VBT */
+			if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
+				intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
 		}
 
 		intel_dsi_init(dev);