drm/radeon: Retry DDC probing on DVI on failure if we got an HPD interrupt

HPD signals on DVI ports can be fired off before the pins required for
DDC probing actually make contact, due to the pins for HPD making
contact first. This results in a HPD signal being asserted but DDC
probing failing, resulting in hotplugging occasionally failing.

This is somewhat rare on most cards (depending on what angle you plug
the DVI connector in), but on some cards it happens constantly. The
Radeon R5 on the machine used for testing this patch for instance, runs
into this issue just about every time I try to hotplug a DVI monitor and
as a result hotplugging almost never works.

Rescheduling the hotplug work for a second when we run into an HPD
signal with a failing DDC probe usually gives enough time for the rest
of the connector's pins to make contact, and fixes this issue.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 97a904835759..6244f4e44e9a 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -813,7 +813,7 @@ int rs600_irq_process(struct radeon_device *rdev)
 		status = rs600_irq_ack(rdev);
 	}
 	if (queue_hotplug)
-		schedule_work(&rdev->hotplug_work);
+		schedule_delayed_work(&rdev->hotplug_work, 0);
 	if (queue_hdmi)
 		schedule_work(&rdev->audio_work);
 	if (rdev->msi_enabled) {