drm/nouveau: Add DRM driver for NVIDIA GPUs

This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA.

This driver is a KMS-based driver and requires a compatible nouveau
userspace libdrm and nouveau X.org driver.

This driver requires firmware files not available in this kernel tree,
interested parties can find them via the nouveau project git archive.

This driver is reverse engineered, and is in no way supported by nVidia.

Support for nearly the complete range of nvidia hw from nv04->g80 (nv50)
is available, and the kms driver should support driving nearly all
output types (displayport is under development still) along with supporting
suspend/resume.

This work is all from the upstream nouveau project found at
nouveau.freedesktop.org.

The original authors list from nouveau git tree is:
Anssi Hannula <anssi.hannula@iki.fi>
Ben Skeggs <bskeggs@redhat.com>
Francisco Jerez <currojerez@riseup.net>
Maarten Maathuis <madman2003@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
Matthew Garrett <mjg@redhat.com>
Matt Parnell <mparnell@gmail.com>
Patrice Mandin <patmandin@gmail.com>
Pekka Paalanen <pq@iki.fi>
Xavier Chantry <shiningxc@gmail.com>
along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 621 insertions, 0 deletions

diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
new file mode 100644
index 000000000000..e5b33339d595
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2003 NVIDIA, Corporation
+ * Copyright 2006 Dave Airlie
+ * Copyright 2007 Maarten Maathuis
+ * Copyright 2007-2009 Stuart Bennett
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+
+#include "nouveau_drv.h"
+#include "nouveau_encoder.h"
+#include "nouveau_connector.h"
+#include "nouveau_crtc.h"
+#include "nouveau_hw.h"
+#include "nvreg.h"
+
+#define FP_TG_CONTROL_ON  (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS |		\
+			   NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
+#define FP_TG_CONTROL_OFF (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_DISABLE |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_HSYNC_DISABLE |	\
+			   NV_PRAMDAC_FP_TG_CONTROL_VSYNC_DISABLE)
+
+static inline bool is_fpc_off(uint32_t fpc)
+{
+	return ((fpc & (FP_TG_CONTROL_ON | FP_TG_CONTROL_OFF)) ==
+			FP_TG_CONTROL_OFF);
+}
+
+int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_entry *dcbent)
+{
+	/* special case of nv_read_tmds to find crtc associated with an output.
+	 * this does not give a correct answer for off-chip dvi, but there's no
+	 * use for such an answer anyway
+	 */
+	int ramdac = (dcbent->or & OUTPUT_C) >> 2;
+
+	NVWriteRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_CONTROL,
+	NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE | 0x4);
+	return ((NVReadRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_DATA) & 0x8) >> 3) ^ ramdac;
+}
+
+void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_entry *dcbent,
+			int head, bool dl)
+{
+	/* The BIOS scripts don't do this for us, sadly
+	 * Luckily we do know the values ;-)
+	 *
+	 * head < 0 indicates we wish to force a setting with the overrideval
+	 * (for VT restore etc.)
+	 */
+
+	int ramdac = (dcbent->or & OUTPUT_C) >> 2;
+	uint8_t tmds04 = 0x80;
+
+	if (head != ramdac)
+		tmds04 = 0x88;
+
+	if (dcbent->type == OUTPUT_LVDS)
+		tmds04 |= 0x01;
+
+	nv_write_tmds(dev, dcbent->or, 0, 0x04, tmds04);
+
+	if (dl)	/* dual link */
+		nv_write_tmds(dev, dcbent->or, 1, 0x04, tmds04 ^ 0x08);
+}
+
+void nv04_dfp_disable(struct drm_device *dev, int head)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
+
+	if (NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL) &
+	    FP_TG_CONTROL_ON) {
+		/* digital remnants must be cleaned before new crtc
+		 * values programmed.  delay is time for the vga stuff
+		 * to realise it's in control again
+		 */
+		NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
+			      FP_TG_CONTROL_OFF);
+		msleep(50);
+	}
+	/* don't inadvertently turn it on when state written later */
+	crtcstate[head].fp_control = FP_TG_CONTROL_OFF;
+}
+
+void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct nouveau_crtc *nv_crtc;
+	uint32_t *fpc;
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		nv_crtc = nouveau_crtc(encoder->crtc);
+		fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
+
+		if (is_fpc_off(*fpc)) {
+			/* using saved value is ok, as (is_digital && dpms_on &&
+			 * fp_control==OFF) is (at present) *only* true when
+			 * fpc's most recent change was by below "off" code
+			 */
+			*fpc = nv_crtc->dpms_saved_fp_control;
+		}
+
+		nv_crtc->fp_users |= 1 << nouveau_encoder(encoder)->dcb->index;
+		NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_FP_TG_CONTROL, *fpc);
+	} else {
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+			nv_crtc = nouveau_crtc(crtc);
+			fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
+
+			nv_crtc->fp_users &= ~(1 << nouveau_encoder(encoder)->dcb->index);
+			if (!is_fpc_off(*fpc) && !nv_crtc->fp_users) {
+				nv_crtc->dpms_saved_fp_control = *fpc;
+				/* cut the FP output */
+				*fpc &= ~FP_TG_CONTROL_ON;
+				*fpc |= FP_TG_CONTROL_OFF;
+				NVWriteRAMDAC(dev, nv_crtc->index,
+					      NV_PRAMDAC_FP_TG_CONTROL, *fpc);
+			}
+		}
+	}
+}
+
+static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
+
+	/* For internal panels and gpu scaling on DVI we need the native mode */
+	if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
+		if (!nv_connector->native_mode)
+			return false;
+		nv_encoder->mode = *nv_connector->native_mode;
+		adjusted_mode->clock = nv_connector->native_mode->clock;
+	} else {
+		nv_encoder->mode = *adjusted_mode;
+	}
+
+	return true;
+}
+
+static void nv04_dfp_prepare_sel_clk(struct drm_device *dev,
+				     struct nouveau_encoder *nv_encoder, int head)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nv04_mode_state *state = &dev_priv->mode_reg;
+	uint32_t bits1618 = nv_encoder->dcb->or & OUTPUT_A ? 0x10000 : 0x40000;
+
+	if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP)
+		return;
+
+	/* SEL_CLK is only used on the primary ramdac
+	 * It toggles spread spectrum PLL output and sets the bindings of PLLs
+	 * to heads on digital outputs
+	 */
+	if (head)
+		state->sel_clk |= bits1618;
+	else
+		state->sel_clk &= ~bits1618;
+
+	/* nv30:
+	 *	bit 0		NVClk spread spectrum on/off
+	 *	bit 2		MemClk spread spectrum on/off
+	 * 	bit 4		PixClk1 spread spectrum on/off toggle
+	 * 	bit 6		PixClk2 spread spectrum on/off toggle
+	 *
+	 * nv40 (observations from bios behaviour and mmio traces):
+	 * 	bits 4&6	as for nv30
+	 * 	bits 5&7	head dependent as for bits 4&6, but do not appear with 4&6;
+	 * 			maybe a different spread mode
+	 * 	bits 8&10	seen on dual-link dvi outputs, purpose unknown (set by POST scripts)
+	 * 	The logic behind turning spread spectrum on/off in the first place,
+	 * 	and which bit-pair to use, is unclear on nv40 (for earlier cards, the fp table
+	 * 	entry has the necessary info)
+	 */
+	if (nv_encoder->dcb->type == OUTPUT_LVDS && dev_priv->saved_reg.sel_clk & 0xf0) {
+		int shift = (dev_priv->saved_reg.sel_clk & 0x50) ? 0 : 1;
+
+		state->sel_clk &= ~0xf0;
+		state->sel_clk |= (head ? 0x40 : 0x10) << shift;
+	}
+}
+
+static void nv04_dfp_prepare(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_encoder_helper_funcs *helper = encoder->helper_private;
+	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	int head = nouveau_crtc(encoder->crtc)->index;
+	struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
+	uint8_t *cr_lcd = &crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX];
+	uint8_t *cr_lcd_oth = &crtcstate[head ^ 1].CRTC[NV_CIO_CRE_LCD__INDEX];
+
+	helper->dpms(encoder, DRM_MODE_DPMS_OFF);
+
+	nv04_dfp_prepare_sel_clk(dev, nv_encoder, head);
+
+	/* Some NV4x have unknown values (0x3f, 0x50, 0x54, 0x6b, 0x79, 0x7f)
+	 * at LCD__INDEX which we don't alter
+	 */
+	if (!(*cr_lcd & 0x44)) {
+		*cr_lcd = 0x3;
+
+		if (nv_two_heads(dev)) {
+			if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
+				*cr_lcd |= head ? 0x0 : 0x8;
+			else {
+				*cr_lcd |= (nv_encoder->dcb->or << 4) & 0x30;
+				if (nv_encoder->dcb->type == OUTPUT_LVDS)
+					*cr_lcd |= 0x30;
+				if ((*cr_lcd & 0x30) == (*cr_lcd_oth & 0x30)) {
+					/* avoid being connected to both crtcs */
+					*cr_lcd_oth &= ~0x30;
+					NVWriteVgaCrtc(dev, head ^ 1,
+						       NV_CIO_CRE_LCD__INDEX,
+						       *cr_lcd_oth);
+				}
+			}
+		}
+	}
+}
+
+
+static void nv04_dfp_mode_set(struct drm_encoder *encoder,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+	struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index];
+	struct nv04_crtc_reg *savep = &dev_priv->saved_reg.crtc_reg[nv_crtc->index];
+	struct nouveau_connector *nv_connector = nouveau_crtc_connector_get(nv_crtc);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_display_mode *output_mode = &nv_encoder->mode;
+	uint32_t mode_ratio, panel_ratio;
+
+	NV_DEBUG(dev, "Output mode on CRTC %d:\n", nv_crtc->index);
+	drm_mode_debug_printmodeline(output_mode);
+
+	/* Initialize the FP registers in this CRTC. */
+	regp->fp_horiz_regs[FP_DISPLAY_END] = output_mode->hdisplay - 1;
+	regp->fp_horiz_regs[FP_TOTAL] = output_mode->htotal - 1;
+	if (!nv_gf4_disp_arch(dev) ||
+	    (output_mode->hsync_start - output_mode->hdisplay) >=
+					dev_priv->vbios->digital_min_front_porch)
+		regp->fp_horiz_regs[FP_CRTC] = output_mode->hdisplay;
+	else
+		regp->fp_horiz_regs[FP_CRTC] = output_mode->hsync_start - dev_priv->vbios->digital_min_front_porch - 1;
+	regp->fp_horiz_regs[FP_SYNC_START] = output_mode->hsync_start - 1;
+	regp->fp_horiz_regs[FP_SYNC_END] = output_mode->hsync_end - 1;
+	regp->fp_horiz_regs[FP_VALID_START] = output_mode->hskew;
+	regp->fp_horiz_regs[FP_VALID_END] = output_mode->hdisplay - 1;
+
+	regp->fp_vert_regs[FP_DISPLAY_END] = output_mode->vdisplay - 1;
+	regp->fp_vert_regs[FP_TOTAL] = output_mode->vtotal - 1;
+	regp->fp_vert_regs[FP_CRTC] = output_mode->vtotal - 5 - 1;
+	regp->fp_vert_regs[FP_SYNC_START] = output_mode->vsync_start - 1;
+	regp->fp_vert_regs[FP_SYNC_END] = output_mode->vsync_end - 1;
+	regp->fp_vert_regs[FP_VALID_START] = 0;
+	regp->fp_vert_regs[FP_VALID_END] = output_mode->vdisplay - 1;
+
+	/* bit26: a bit seen on some g7x, no as yet discernable purpose */
+	regp->fp_control = NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
+			   (savep->fp_control & (1 << 26 | NV_PRAMDAC_FP_TG_CONTROL_READ_PROG));
+	/* Deal with vsync/hsync polarity */
+	/* LVDS screens do set this, but modes with +ve syncs are very rare */
+	if (output_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS;
+	if (output_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS;
+	/* panel scaling first, as native would get set otherwise */
+	if (nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_CENTER)	/* panel handles it */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_CENTER;
+	else if (adjusted_mode->hdisplay == output_mode->hdisplay &&
+		 adjusted_mode->vdisplay == output_mode->vdisplay) /* native mode */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_NATIVE;
+	else /* gpu needs to scale */
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_SCALE;
+	if (nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) & NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT)
+		regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12;
+	if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP &&
+	    output_mode->clock > 165000)
+		regp->fp_control |= (2 << 24);
+	if (nv_encoder->dcb->type == OUTPUT_LVDS) {
+		bool duallink, dummy;
+
+		nouveau_bios_parse_lvds_table(dev, nv_connector->native_mode->
+					      clock, &duallink, &dummy);
+		if (duallink)
+			regp->fp_control |= (8 << 28);
+	} else
+	if (output_mode->clock > 165000)
+		regp->fp_control |= (8 << 28);
+
+	regp->fp_debug_0 = NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND |
+			   NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND |
+			   NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR |
+			   NV_PRAMDAC_FP_DEBUG_0_XINTERP_BILINEAR |
+			   NV_RAMDAC_FP_DEBUG_0_TMDS_ENABLED |
+			   NV_PRAMDAC_FP_DEBUG_0_YSCALE_ENABLE |
+			   NV_PRAMDAC_FP_DEBUG_0_XSCALE_ENABLE;
+
+	/* We want automatic scaling */
+	regp->fp_debug_1 = 0;
+	/* This can override HTOTAL and VTOTAL */
+	regp->fp_debug_2 = 0;
+
+	/* Use 20.12 fixed point format to avoid floats */
+	mode_ratio = (1 << 12) * adjusted_mode->hdisplay / adjusted_mode->vdisplay;
+	panel_ratio = (1 << 12) * output_mode->hdisplay / output_mode->vdisplay;
+	/* if ratios are equal, SCALE_ASPECT will automatically (and correctly)
+	 * get treated the same as SCALE_FULLSCREEN */
+	if (nv_connector->scaling_mode == DRM_MODE_SCALE_ASPECT &&
+	    mode_ratio != panel_ratio) {
+		uint32_t diff, scale;
+		bool divide_by_2 = nv_gf4_disp_arch(dev);
+
+		if (mode_ratio < panel_ratio) {
+			/* vertical needs to expand to glass size (automatic)
+			 * horizontal needs to be scaled at vertical scale factor
+			 * to maintain aspect */
+
+			scale = (1 << 12) * adjusted_mode->vdisplay / output_mode->vdisplay;
+			regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
+					   XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
+
+			/* restrict area of screen used, horizontally */
+			diff = output_mode->hdisplay -
+			       output_mode->vdisplay * mode_ratio / (1 << 12);
+			regp->fp_horiz_regs[FP_VALID_START] += diff / 2;
+			regp->fp_horiz_regs[FP_VALID_END] -= diff / 2;
+		}
+
+		if (mode_ratio > panel_ratio) {
+			/* horizontal needs to expand to glass size (automatic)
+			 * vertical needs to be scaled at horizontal scale factor
+			 * to maintain aspect */
+
+			scale = (1 << 12) * adjusted_mode->hdisplay / output_mode->hdisplay;
+			regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
+					   XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
+
+			/* restrict area of screen used, vertically */
+			diff = output_mode->vdisplay -
+			       (1 << 12) * output_mode->hdisplay / mode_ratio;
+			regp->fp_vert_regs[FP_VALID_START] += diff / 2;
+			regp->fp_vert_regs[FP_VALID_END] -= diff / 2;
+		}
+	}
+
+	/* Output property. */
+	if (nv_connector->use_dithering) {
+		if (dev_priv->chipset == 0x11)
+			regp->dither = savep->dither | 0x00010000;
+		else {
+			int i;
+			regp->dither = savep->dither | 0x00000001;
+			for (i = 0; i < 3; i++) {
+				regp->dither_regs[i] = 0xe4e4e4e4;
+				regp->dither_regs[i + 3] = 0x44444444;
+			}
+		}
+	} else {
+		if (dev_priv->chipset != 0x11) {
+			/* reset them */
+			int i;
+			for (i = 0; i < 3; i++) {
+				regp->dither_regs[i] = savep->dither_regs[i];
+				regp->dither_regs[i + 3] = savep->dither_regs[i + 3];
+			}
+		}
+		regp->dither = savep->dither;
+	}
+
+	regp->fp_margin_color = 0;
+}
+
+static void nv04_dfp_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct drm_encoder_helper_funcs *helper = encoder->helper_private;
+	struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct dcb_entry *dcbe = nv_encoder->dcb;
+	int head = nouveau_crtc(encoder->crtc)->index;
+
+	NV_TRACE(dev, "%s called for encoder %d\n", __func__, nv_encoder->dcb->index);
+
+	if (dcbe->type == OUTPUT_TMDS)
+		run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
+	else if (dcbe->type == OUTPUT_LVDS)
+		call_lvds_script(dev, dcbe, head, LVDS_RESET, nv_encoder->mode.clock);
+
+	/* update fp_control state for any changes made by scripts,
+	 * so correct value is written at DPMS on */
+	dev_priv->mode_reg.crtc_reg[head].fp_control =
+		NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
+
+	/* This could use refinement for flatpanels, but it should work this way */
+	if (dev_priv->chipset < 0x44)
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0xf0000000);
+	else
+		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
+
+	helper->dpms(encoder, DRM_MODE_DPMS_ON);
+
+	NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
+		drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+		nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+}
+
+static inline bool is_powersaving_dpms(int mode)
+{
+	return (mode != DRM_MODE_DPMS_ON);
+}
+
+static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	bool was_powersaving = is_powersaving_dpms(nv_encoder->last_dpms);
+
+	if (nv_encoder->last_dpms == mode)
+		return;
+	nv_encoder->last_dpms = mode;
+
+	NV_INFO(dev, "Setting dpms mode %d on lvds encoder (output %d)\n",
+		     mode, nv_encoder->dcb->index);
+
+	if (was_powersaving && is_powersaving_dpms(mode))
+		return;
+
+	if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
+		struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
+
+		/* when removing an output, crtc may not be set, but PANEL_OFF
+		 * must still be run
+		 */
+		int head = crtc ? nouveau_crtc(crtc)->index :
+			   nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
+
+		if (mode == DRM_MODE_DPMS_ON) {
+			if (!nv_connector->native_mode) {
+				NV_ERROR(dev, "Not turning on LVDS without native mode\n");
+				return;
+			}
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_ON, nv_connector->native_mode->clock);
+		} else
+			/* pxclk of 0 is fine for PANEL_OFF, and for a
+			 * disconnected LVDS encoder there is no native_mode
+			 */
+			call_lvds_script(dev, nv_encoder->dcb, head,
+					 LVDS_PANEL_OFF, 0);
+	}
+
+	nv04_dfp_update_fp_control(encoder, mode);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		nv04_dfp_prepare_sel_clk(dev, nv_encoder, nouveau_crtc(crtc)->index);
+	else {
+		dev_priv->mode_reg.sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK);
+		dev_priv->mode_reg.sel_clk &= ~0xf0;
+	}
+	NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, dev_priv->mode_reg.sel_clk);
+}
+
+static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+	if (nv_encoder->last_dpms == mode)
+		return;
+	nv_encoder->last_dpms = mode;
+
+	NV_INFO(dev, "Setting dpms mode %d on tmds encoder (output %d)\n",
+		     mode, nv_encoder->dcb->index);
+
+	nv04_dfp_update_fp_control(encoder, mode);
+}
+
+static void nv04_dfp_save(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+
+	if (nv_two_heads(dev))
+		nv_encoder->restore.head =
+			nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
+}
+
+static void nv04_dfp_restore(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	int head = nv_encoder->restore.head;
+
+	if (nv_encoder->dcb->type == OUTPUT_LVDS) {
+		struct drm_display_mode *native_mode = nouveau_encoder_connector_get(nv_encoder)->native_mode;
+		if (native_mode)
+			call_lvds_script(dev, nv_encoder->dcb, head, LVDS_PANEL_ON,
+					 native_mode->clock);
+		else
+			NV_ERROR(dev, "Not restoring LVDS without native mode\n");
+
+	} else if (nv_encoder->dcb->type == OUTPUT_TMDS) {
+		int clock = nouveau_hw_pllvals_to_clk
+					(&dev_priv->saved_reg.crtc_reg[head].pllvals);
+
+		run_tmds_table(dev, nv_encoder->dcb, head, clock);
+	}
+
+	nv_encoder->last_dpms = NV_DPMS_CLEARED;
+}
+
+static void nv04_dfp_destroy(struct drm_encoder *encoder)
+{
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+	NV_DEBUG(encoder->dev, "\n");
+
+	drm_encoder_cleanup(encoder);
+	kfree(nv_encoder);
+}
+
+static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
+	.dpms = nv04_lvds_dpms,
+	.save = nv04_dfp_save,
+	.restore = nv04_dfp_restore,
+	.mode_fixup = nv04_dfp_mode_fixup,
+	.prepare = nv04_dfp_prepare,
+	.commit = nv04_dfp_commit,
+	.mode_set = nv04_dfp_mode_set,
+	.detect = NULL,
+};
+
+static const struct drm_encoder_helper_funcs nv04_tmds_helper_funcs = {
+	.dpms = nv04_tmds_dpms,
+	.save = nv04_dfp_save,
+	.restore = nv04_dfp_restore,
+	.mode_fixup = nv04_dfp_mode_fixup,
+	.prepare = nv04_dfp_prepare,
+	.commit = nv04_dfp_commit,
+	.mode_set = nv04_dfp_mode_set,
+	.detect = NULL,
+};
+
+static const struct drm_encoder_funcs nv04_dfp_funcs = {
+	.destroy = nv04_dfp_destroy,
+};
+
+int nv04_dfp_create(struct drm_device *dev, struct dcb_entry *entry)
+{
+	const struct drm_encoder_helper_funcs *helper;
+	struct drm_encoder *encoder;
+	struct nouveau_encoder *nv_encoder = NULL;
+	int type;
+
+	switch (entry->type) {
+	case OUTPUT_TMDS:
+		type = DRM_MODE_ENCODER_TMDS;
+		helper = &nv04_tmds_helper_funcs;
+		break;
+	case OUTPUT_LVDS:
+		type = DRM_MODE_ENCODER_LVDS;
+		helper = &nv04_lvds_helper_funcs;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
+	if (!nv_encoder)
+		return -ENOMEM;
+
+	encoder = to_drm_encoder(nv_encoder);
+
+	nv_encoder->dcb = entry;
+	nv_encoder->or = ffs(entry->or) - 1;
+
+	drm_encoder_init(dev, encoder, &nv04_dfp_funcs, type);
+	drm_encoder_helper_add(encoder, helper);
+
+	encoder->possible_crtcs = entry->heads;
+	encoder->possible_clones = 0;
+
+	return 0;
+}