drm/i915: add dynamic performance control support for Ironlake

Ironlake (and 965GM, which this patch doesn't support) supports a
hardware performance and power management feature that allows it to
adjust to changes in GPU load over time with software help.  The goal
if this is to maximize performance/power for a given workload.

This patch enables that feature, which is also a requirement for
supporting Intelligent Power Sharing, a feature which allows for
dynamic budgeting of power between the CPU and GPU in Arrandale
platforms.

Tested-by: ykzhao <yakui.zhao@intel.com>
[anholt: Resolved against the irq handler loop removal]
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

1 files changed, 96 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index a894ade03093..55340de618ea 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -386,6 +386,97 @@ out:
 	return 0;
 }
 
+static int i915_rstdby_delays(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u16 crstanddelay = I915_READ16(CRSTANDVID);
+
+	seq_printf(m, "w/ctx: %d, w/o ctx: %d\n", (crstanddelay >> 8) & 0x3f, (crstanddelay & 0x3f));
+
+	return 0;
+}
+
+static int i915_cur_delayinfo(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u16 rgvswctl = I915_READ16(MEMSWCTL);
+
+	seq_printf(m, "Last command: 0x%01x\n", (rgvswctl >> 13) & 0x3);
+	seq_printf(m, "Command status: %d\n", (rgvswctl >> 12) & 1);
+	seq_printf(m, "P%d DELAY 0x%02x\n", (rgvswctl >> 8) & 0xf,
+		   rgvswctl & 0x3f);
+
+	return 0;
+}
+
+static int i915_delayfreq_table(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 delayfreq;
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		delayfreq = I915_READ(PXVFREQ_BASE + i * 4);
+		seq_printf(m, "P%02dVIDFREQ: 0x%08x\n", i, delayfreq);
+	}
+
+	return 0;
+}
+
+static inline int MAP_TO_MV(int map)
+{
+	return 1250 - (map * 25);
+}
+
+static int i915_inttoext_table(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 inttoext;
+	int i;
+
+	for (i = 1; i <= 32; i++) {
+		inttoext = I915_READ(INTTOEXT_BASE_ILK + i * 4);
+		seq_printf(m, "INTTOEXT%02d: 0x%08x\n", i, inttoext);
+	}
+
+	return 0;
+}
+
+static int i915_drpc_info(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 rgvmodectl = I915_READ(MEMMODECTL);
+
+	seq_printf(m, "HD boost: %s\n", (rgvmodectl & MEMMODE_BOOST_EN) ?
+		   "yes" : "no");
+	seq_printf(m, "Boost freq: %d\n",
+		   (rgvmodectl & MEMMODE_BOOST_FREQ_MASK) >>
+		   MEMMODE_BOOST_FREQ_SHIFT);
+	seq_printf(m, "HW control enabled: %s\n",
+		   rgvmodectl & MEMMODE_HWIDLE_EN ? "yes" : "no");
+	seq_printf(m, "SW control enabled: %s\n",
+		   rgvmodectl & MEMMODE_SWMODE_EN ? "yes" : "no");
+	seq_printf(m, "Gated voltage change: %s\n",
+		   rgvmodectl & MEMMODE_RCLK_GATE ? "yes" : "no");
+	seq_printf(m, "Starting frequency: P%d\n",
+		   (rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT);
+	seq_printf(m, "Max frequency: P%d\n",
+		   (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT);
+	seq_printf(m, "Min frequency: P%d\n", (rgvmodectl & MEMMODE_FMIN_MASK));
+
+	return 0;
+}
+
 static int
 i915_wedged_open(struct inode *inode,
 		 struct file *filp)
@@ -503,6 +594,11 @@ static struct drm_info_list i915_debugfs_list[] = {
 	{"i915_ringbuffer_info", i915_ringbuffer_info, 0},
 	{"i915_batchbuffers", i915_batchbuffer_info, 0},
 	{"i915_error_state", i915_error_state, 0},
+	{"i915_rstdby_delays", i915_rstdby_delays, 0},
+	{"i915_cur_delayinfo", i915_cur_delayinfo, 0},
+	{"i915_delayfreq_table", i915_delayfreq_table, 0},
+	{"i915_inttoext_table", i915_inttoext_table, 0},
+	{"i915_drpc_info", i915_drpc_info, 0},
 };
 #define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)