gpio: gpio-generic: Add 16 and 32 bit big endian byte order support

There is no general support for 64-bit big endian accesses, so that is
left unsupported.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 47 insertions, 9 deletions

diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index 05fcc0f247ca..42d470632aea 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -104,6 +104,26 @@ static unsigned long bgpio_read64(void __iomem *reg)
 }
 #endif /* BITS_PER_LONG >= 64 */
 
+static void bgpio_write16be(void __iomem *reg, unsigned long data)
+{
+	iowrite16be(data, reg);
+}
+
+static unsigned long bgpio_read16be(void __iomem *reg)
+{
+	return ioread16be(reg);
+}
+
+static void bgpio_write32be(void __iomem *reg, unsigned long data)
+{
+	iowrite32be(data, reg);
+}
+
+static unsigned long bgpio_read32be(void __iomem *reg)
+{
+	return ioread32be(reg);
+}
+
 static unsigned long bgpio_pin2mask(struct bgpio_chip *bgc, unsigned int pin)
 {
 	return 1 << pin;
@@ -249,7 +269,8 @@ static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val)
 
 static int bgpio_setup_accessors(struct device *dev,
 				 struct bgpio_chip *bgc,
-				 bool be)
+				 bool bit_be,
+				 bool byte_be)
 {
 
 	switch (bgc->bits) {
@@ -258,17 +279,33 @@ static int bgpio_setup_accessors(struct device *dev,
 		bgc->write_reg	= bgpio_write8;
 		break;
 	case 16:
-		bgc->read_reg	= bgpio_read16;
-		bgc->write_reg	= bgpio_write16;
+		if (byte_be) {
+			bgc->read_reg	= bgpio_read16be;
+			bgc->write_reg	= bgpio_write16be;
+		} else {
+			bgc->read_reg	= bgpio_read16;
+			bgc->write_reg	= bgpio_write16;
+		}
 		break;
 	case 32:
-		bgc->read_reg	= bgpio_read32;
-		bgc->write_reg	= bgpio_write32;
+		if (byte_be) {
+			bgc->read_reg	= bgpio_read32be;
+			bgc->write_reg	= bgpio_write32be;
+		} else {
+			bgc->read_reg	= bgpio_read32;
+			bgc->write_reg	= bgpio_write32;
+		}
 		break;
 #if BITS_PER_LONG >= 64
 	case 64:
-		bgc->read_reg	= bgpio_read64;
-		bgc->write_reg	= bgpio_write64;
+		if (byte_be) {
+			dev_err(dev,
+				"64 bit big endian byte order unsupported\n");
+			return -EINVAL;
+		} else {
+			bgc->read_reg	= bgpio_read64;
+			bgc->write_reg	= bgpio_write64;
+		}
 		break;
 #endif /* BITS_PER_LONG >= 64 */
 	default:
@@ -276,7 +313,7 @@ static int bgpio_setup_accessors(struct device *dev,
 		return -EINVAL;
 	}
 
-	bgc->pin2mask = be ? bgpio_pin2mask_be : bgpio_pin2mask;
+	bgc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask;
 
 	return 0;
 }
@@ -385,7 +422,8 @@ int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
 	if (ret)
 		return ret;
 
-	ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN);
+	ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN,
+				    flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER);
 	if (ret)
 		return ret;