gpio/em: convert to linear IRQ domain

The code in the em driver seems to want to try to do the job of
the linear IRQ domain (allocate descriptors and grab a virtual
range). So why not just use the linear IRQ domain? The code is
now cut down so we don't need isolated functions for this.

Also note that we use irq_create_mapping() to make sure
descriptors are allocated for these IRQs.

Also fixed the FIXME to remove the domain after use.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 7 insertions, 39 deletions

diff --git a/drivers/gpio/gpio-em.c b/drivers/gpio/gpio-em.c
index efb4c2d0d132..88bdfe37816f 100644
--- a/drivers/gpio/gpio-em.c
+++ b/drivers/gpio/gpio-em.c
@@ -35,7 +35,6 @@
 struct em_gio_priv {
 	void __iomem *base0;
 	void __iomem *base1;
-	unsigned int irq_base;
 	spinlock_t sense_lock;
 	struct platform_device *pdev;
 	struct gpio_chip gpio_chip;
@@ -214,7 +213,7 @@ static int em_gio_direction_output(struct gpio_chip *chip, unsigned offset,
 
 static int em_gio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	return irq_find_mapping(gpio_to_priv(chip)->irq_domain, offset);
+	return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
 }
 
 static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
@@ -234,40 +233,6 @@ static struct irq_domain_ops em_gio_irq_domain_ops = {
 	.map	= em_gio_irq_domain_map,
 };
 
-static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
-{
-	struct platform_device *pdev = p->pdev;
-	struct gpio_em_config *pdata = pdev->dev.platform_data;
-
-	p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
-				      pdata->number_of_pins, numa_node_id());
-	if (p->irq_base < 0) {
-		dev_err(&pdev->dev, "cannot get irq_desc\n");
-		return p->irq_base;
-	}
-	pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
-		 pdata->gpio_base, pdata->number_of_pins, p->irq_base);
-
-	p->irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
-					      pdata->number_of_pins,
-					      p->irq_base, 0,
-					      &em_gio_irq_domain_ops, p);
-	if (!p->irq_domain) {
-		irq_free_descs(p->irq_base, pdata->number_of_pins);
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static void em_gio_irq_domain_cleanup(struct em_gio_priv *p)
-{
-	struct gpio_em_config *pdata = p->pdev->dev.platform_data;
-
-	irq_free_descs(p->irq_base, pdata->number_of_pins);
-	/* FIXME: irq domain wants to be freed! */
-}
-
 static int __devinit em_gio_probe(struct platform_device *pdev)
 {
 	struct gpio_em_config *pdata = pdev->dev.platform_data;
@@ -334,8 +299,11 @@ static int __devinit em_gio_probe(struct platform_device *pdev)
 	irq_chip->irq_set_type = em_gio_irq_set_type;
 	irq_chip->flags	= IRQCHIP_SKIP_SET_WAKE;
 
-	ret = em_gio_irq_domain_init(p);
-	if (ret) {
+	p->irq_domain = irq_domain_add_linear(pdev->dev.of_node,
+					      pdata->number_of_pins,
+					      &em_gio_irq_domain_ops, p);
+	if (!p->irq_domain)
+		err = -ENXIO;
 		dev_err(&pdev->dev, "cannot initialize irq domain\n");
 		goto err3;
 	}
@@ -364,7 +332,7 @@ err6:
 err5:
 	free_irq(irq[0]->start, pdev);
 err4:
-	em_gio_irq_domain_cleanup(p);
+	irq_domain_remove(p->irq_domain);
 err3:
 	iounmap(p->base1);
 err2: