summaryrefslogtreecommitdiffstats
path: root/drivers/firewire
diff options
context:
space:
mode:
authorStefan Richter <stefanr@s5r6.in-berlin.de>2007-05-25 13:54:49 +0200
committerStefan Richter <stefanr@s5r6.in-berlin.de>2007-05-27 23:21:01 +0200
commit9a60731d0036a6c6c265acd4248c17fd24fc8e13 (patch)
treed72cc41fdda31d2c204c2a8a663242e1e55d30da /drivers/firewire
parentec839e43fbe1b1ab74264ac510f6cd9c8e8334a4 (diff)
downloadblackbird-op-linux-9a60731d0036a6c6c265acd4248c17fd24fc8e13.tar.gz
blackbird-op-linux-9a60731d0036a6c6c265acd4248c17fd24fc8e13.zip
firewire: prefix modules with firewire- instead of fw-
Of course everybody immediately associates "fw-" with FireWire, not firmware or firewall or whatever. But "firewire-" has a nice ring to it too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Hoegsberg <krh@bitplanet.net>
Diffstat (limited to 'drivers/firewire')
-rw-r--r--drivers/firewire/Kconfig14
-rw-r--r--drivers/firewire/Makefile12
2 files changed, 14 insertions, 12 deletions
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index 5932c72f9e42..396dade731f9 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -18,7 +18,7 @@ config FIREWIRE
your IEEE 1394 adapter.
To compile this driver as a module, say M here: the module will be
- called fw-core.
+ called firewire-core.
This is the "JUJU" FireWire stack, an alternative implementation
designed for robustness and simplicity. You can build either this
@@ -34,11 +34,11 @@ config FIREWIRE_OHCI
is the only chipset in use, so say Y here.
To compile this driver as a module, say M here: The module will be
- called fw-ohci.
+ called firewire-ohci.
If you also build ohci1394 of the classic IEEE 1394 driver stack,
- blacklist either ohci1394 or fw-ohci to let hotplug load the desired
- driver.
+ blacklist either ohci1394 or firewire-ohci to let hotplug load the
+ desired driver.
config FIREWIRE_SBP2
tristate "Support for storage devices (SBP-2 protocol driver)"
@@ -50,12 +50,12 @@ config FIREWIRE_SBP2
like scanners.
To compile this driver as a module, say M here: The module will be
- called fw-sbp2.
+ called firewire-sbp2.
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
If you also build sbp2 of the classic IEEE 1394 driver stack,
- blacklist either sbp2 or fw-sbp2 to let hotplug load the desired
- driver.
+ blacklist either sbp2 or firewire-sbp2 to let hotplug load the
+ desired driver.
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index fc7d59d4bce0..a7c31e9039c1 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -2,9 +2,11 @@
# Makefile for the Linux IEEE 1394 implementation
#
-fw-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
- fw-device.o fw-cdev.o
+firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \
+ fw-device.o fw-cdev.o
+firewire-ohci-y += fw-ohci.o
+firewire-sbp2-y += fw-sbp2.o
-obj-$(CONFIG_FIREWIRE) += fw-core.o
-obj-$(CONFIG_FIREWIRE_OHCI) += fw-ohci.o
-obj-$(CONFIG_FIREWIRE_SBP2) += fw-sbp2.o
+obj-$(CONFIG_FIREWIRE) += firewire-core.o
+obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
+obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
OpenPOWER on IntegriCloud