summaryrefslogtreecommitdiffstats
path: root/drivers/dma
diff options
context:
space:
mode:
authorRussell King - ARM Linux <linux@arm.linux.org.uk>2011-01-16 20:18:05 +0000
committerDan Williams <dan.j.williams@intel.com>2011-01-16 16:55:43 -0800
commit94ae85220a07d357d4937086c490854f63344de4 (patch)
tree8dda364dc7cbae73a30bbe5ef47ac8d674d998c6 /drivers/dma
parent0261f7416362f6affc2d4fe7fea9320a6bdaaee6 (diff)
downloadblackbird-op-linux-94ae85220a07d357d4937086c490854f63344de4.tar.gz
blackbird-op-linux-94ae85220a07d357d4937086c490854f63344de4.zip
ARM: PL08x: cleanup comments
Cleanup the formatting of comments, remove some which don't make sense anymore. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [fix conflict with 96a608a4] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'drivers/dma')
-rw-r--r--drivers/dma/amba-pl08x.c146
1 files changed, 52 insertions, 94 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index bebc678ed4fc..297f48b0cba9 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -19,14 +19,14 @@
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
- * The full GNU General Public License is in this distribution in the
- * file called COPYING.
+ * The full GNU General Public License is in this distribution in the file
+ * called COPYING.
*
* Documentation: ARM DDI 0196G == PL080
- * Documentation: ARM DDI 0218E == PL081
+ * Documentation: ARM DDI 0218E == PL081
*
- * PL080 & PL081 both have 16 sets of DMA signals that can be routed to
- * any channel.
+ * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
+ * channel.
*
* The PL080 has 8 channels available for simultaneous use, and the PL081
* has only two channels. So on these DMA controllers the number of channels
@@ -91,11 +91,9 @@
#define DRIVER_NAME "pl08xdmac"
/**
- * struct vendor_data - vendor-specific config parameters
- * for PL08x derivatives
+ * struct vendor_data - vendor-specific config parameters for PL08x derivatives
* @channels: the number of channels available in this variant
- * @dualmaster: whether this version supports dual AHB masters
- * or not.
+ * @dualmaster: whether this version supports dual AHB masters or not.
*/
struct vendor_data {
u8 channels;
@@ -241,10 +239,8 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
*
* Disabling individual channels could lose data.
*
- * Disable the peripheral DMA after disabling the DMAC
- * in order to allow the DMAC FIFO to drain, and
- * hence allow the channel to show inactive
- *
+ * Disable the peripheral DMA after disabling the DMAC in order to allow
+ * the DMAC FIFO to drain, and hence allow the channel to show inactive
*/
static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
{
@@ -367,6 +363,10 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
/*
* Allocate a physical channel for a virtual channel
+ *
+ * Try to locate a physical channel to be used for this transfer. If all
+ * are taken return NULL and the requester will have to cope by using
+ * some fallback PIO mode or retrying later.
*/
static struct pl08x_phy_chan *
pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
@@ -376,12 +376,6 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
unsigned long flags;
int i;
- /*
- * Try to locate a physical channel to be used for
- * this transfer. If all are taken return NULL and
- * the requester will have to cope by using some fallback
- * PIO mode or retrying later.
- */
for (i = 0; i < pl08x->vd->channels; i++) {
ch = &pl08x->phy_chans[i];
@@ -495,9 +489,9 @@ struct pl08x_lli_build_data {
};
/*
- * Autoselect a master bus to use for the transfer
- * this prefers the destination bus if both available
- * if fixed address on one bus the other will be chosen
+ * Autoselect a master bus to use for the transfer this prefers the
+ * destination bus if both available if fixed address on one bus the
+ * other will be chosen
*/
static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
@@ -530,8 +524,7 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
}
/*
- * Fills in one LLI for a certain transfer descriptor
- * and advance the counter
+ * Fills in one LLI for a certain transfer descriptor and advance the counter
*/
static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
int num_llis, int len, u32 cctl)
@@ -640,15 +633,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
* Choose bus to align to
* - prefers destination bus if both available
* - if fixed address on one bus chooses other
- * - modifies cctl to choose an appropriate master
*/
pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
if (txd->len < mbus->buswidth) {
- /*
- * Less than a bus width available
- * - send as single bytes
- */
+ /* Less than a bus width available - send as single bytes */
while (bd.remainder) {
dev_vdbg(&pl08x->adev->dev,
"%s single byte LLIs for a transfer of "
@@ -659,10 +648,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
total_bytes++;
}
} else {
- /*
- * Make one byte LLIs until master bus is aligned
- * - slave will then be aligned also
- */
+ /* Make one byte LLIs until master bus is aligned */
while ((mbus->addr) % (mbus->buswidth)) {
dev_vdbg(&pl08x->adev->dev,
"%s adjustment lli for less than bus width "
@@ -674,7 +660,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
}
/*
- * Master now aligned
+ * Master now aligned
* - if slave is not then we must set its width down
*/
if (sbus->addr % sbus->buswidth) {
@@ -732,10 +718,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
if (lli_len == target_len) {
/*
- * Can send what we wanted
- */
- /*
- * Maintain alignment
+ * Can send what we wanted.
+ * Maintain alignment
*/
lli_len = (lli_len/mbus->buswidth) *
mbus->buswidth;
@@ -743,17 +727,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
} else {
/*
* So now we know how many bytes to transfer
- * to get to the nearest boundary
- * The next LLI will past the boundary
- * - however we may be working to a boundary
- * on the slave bus
- * We need to ensure the master stays aligned
+ * to get to the nearest boundary. The next
+ * LLI will past the boundary. However, we
+ * may be working to a boundary on the slave
+ * bus. We need to ensure the master stays
+ * aligned, and that we are working in
+ * multiples of the bus widths.
*/
odd_bytes = lli_len % mbus->buswidth;
- /*
- * - and that we are working in multiples
- * of the bus widths
- */
lli_len -= odd_bytes;
}
@@ -793,8 +774,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
if (odd_bytes) {
/*
- * Creep past the boundary,
- * maintaining master alignment
+ * Creep past the boundary, maintaining
+ * master alignment
*/
int j;
for (j = 0; (j < mbus->buswidth)
@@ -837,13 +818,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
}
llis_va = txd->llis_va;
- /*
- * The final LLI terminates the LLI.
- */
+ /* The final LLI terminates the LLI. */
llis_va[num_llis - 1].lli = 0;
- /*
- * The final LLI element shall also fire an interrupt
- */
+ /* The final LLI element shall also fire an interrupt. */
llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
#ifdef VERBOSE_DEBUG
@@ -891,7 +868,6 @@ static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x,
list_del(&txdi->node);
pl08x_free_txd(pl08x, txdi);
}
-
}
}
@@ -1020,10 +996,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
}
/*
- * Code accessing dma_async_is_complete() in a tight loop
- * may give problems - could schedule where indicated.
- * If slaves are relying on interrupts to signal completion this
- * function must not be called with interrupts disabled
+ * Code accessing dma_async_is_complete() in a tight loop may give problems.
+ * If slaves are relying on interrupts to signal completion this function
+ * must not be called with interrupts disabled.
*/
static enum dma_status
pl08x_dma_tx_status(struct dma_chan *chan,
@@ -1046,10 +1021,6 @@ pl08x_dma_tx_status(struct dma_chan *chan,
}
/*
- * schedule(); could be inserted here
- */
-
- /*
* This cookie not complete yet
*/
last_used = plchan->chan.cookie;
@@ -1273,11 +1244,10 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
}
} else
/*
- * Else we're all set, paused and ready to roll,
- * status will switch to PL08X_CHAN_RUNNING when
- * we call issue_pending(). If there is something
- * running on the channel already we don't change
- * its state.
+ * Else we're all set, paused and ready to roll, status
+ * will switch to PL08X_CHAN_RUNNING when we call
+ * issue_pending(). If there is something running on the
+ * channel already we don't change its state.
*/
if (plchan->state == PL08X_CHAN_IDLE)
plchan->state = PL08X_CHAN_PAUSED;
@@ -1528,10 +1498,9 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
/*
* Just check that the device is there and active
- * TODO: turn this bit on/off depending on the number of
- * physical channels actually used, if it is zero... well
- * shut it off. That will save some power. Cut the clock
- * at the same time.
+ * TODO: turn this bit on/off depending on the number of physical channels
+ * actually used, if it is zero... well shut it off. That will save some
+ * power. Cut the clock at the same time.
*/
static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
{
@@ -1579,16 +1548,11 @@ static void pl08x_tasklet(unsigned long data)
plchan->at = NULL;
if (txd) {
- /*
- * Update last completed
- */
+ /* Update last completed */
plchan->lc = txd->tx.cookie;
}
- /*
- * If a new descriptor is queued, set it up
- * plchan->at is NULL here
- */
+ /* If a new descriptor is queued, set it up plchan->at is NULL here */
if (!list_empty(&plchan->pend_list)) {
struct pl08x_txd *next;
@@ -1615,11 +1579,10 @@ static void pl08x_tasklet(unsigned long data)
plchan->state = PL08X_CHAN_IDLE;
/*
- * And NOW before anyone else can grab that free:d
- * up physical channel, see if there is some memcpy
- * pending that seriously needs to start because of
- * being stacked up while we were choking the
- * physical channels with data.
+ * And NOW before anyone else can grab that free:d up
+ * physical channel, see if there is some memcpy pending
+ * that seriously needs to start because of being stacked
+ * up while we were choking the physical channels with data.
*/
list_for_each_entry(waiting, &pl08x->memcpy.channels,
chan.device_node) {
@@ -1670,9 +1633,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
val = readl(pl08x->base + PL080_ERR_STATUS);
if (val) {
- /*
- * An error interrupt (on one or more channels)
- */
+ /* An error interrupt (on one or more channels) */
dev_err(&pl08x->adev->dev,
"%s error interrupt, register value 0x%08x\n",
__func__, val);
@@ -1696,9 +1657,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
mask |= (1 << i);
}
}
- /*
- * Clear only the terminal interrupts on channels we processed
- */
+ /* Clear only the terminal interrupts on channels we processed */
writel(mask, pl08x->base + PL080_TC_CLEAR);
return mask ? IRQ_HANDLED : IRQ_NONE;
@@ -1717,6 +1676,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
int i;
INIT_LIST_HEAD(&dmadev->channels);
+
/*
* Register as many many memcpy as we have physical channels,
* we won't always be able to use all but the code will have
@@ -1950,9 +1910,7 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id)
/* Turn on the PL08x */
pl08x_ensure_on(pl08x);
- /*
- * Attach the interrupt handler
- */
+ /* Attach the interrupt handler */
writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
OpenPOWER on IntegriCloud