diff options
| author | Heiko Stuebner <heiko@sntech.de> | 2013-10-08 06:42:10 +0900 |
|---|---|---|
| committer | Kukjin Kim <kgene.kim@samsung.com> | 2013-10-08 06:42:10 +0900 |
| commit | ddeccb8d6b5bbe2c1e3a29f8c74b52f170c2207d (patch) | |
| tree | 808f494a72787c87c2504f6b93c8cd165489bda2 /drivers/dma/Makefile | |
| parent | 0fa93b914d45ed8dd248bd621d4396e9f790817c (diff) | |
| download | blackbird-op-linux-ddeccb8d6b5bbe2c1e3a29f8c74b52f170c2207d.tar.gz blackbird-op-linux-ddeccb8d6b5bbe2c1e3a29f8c74b52f170c2207d.zip | |
dmaengine: add driver for Samsung s3c24xx SoCs
This adds a new driver to support the s3c24xx dma using the dmaengine
and makes the old one in mach-s3c24xx obsolete in the long run.
Conceptually the s3c24xx-dma feels like a distant relative of the pl08x
with numerous virtual channels being mapped to a lot less physical ones.
The driver therefore borrows a lot from the amba-pl08x driver in this
regard. Functionality-wise the driver gains a memcpy ability in addition
to the slave_sg one.
The driver supports both the method for requesting the peripheral used
by SoCs before the S3C2443 and the different method for S3C2443 and later.
On earlier SoCs the hardware channels usable for specific peripherals is
constrainted while on later SoCs all channels can be used for any peripheral.
Tested on a s3c2416-based board, memcpy using the dmatest module and
slave_sg partially using the spi-s3c64xx driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Diffstat (limited to 'drivers/dma/Makefile')
| -rw-r--r-- | drivers/dma/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index db89035b3626..0ce2da97e429 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_SIRF_DMA) += sirf-dma.o obj-$(CONFIG_TI_EDMA) += edma.o obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o +obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o |
