Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

1 files changed, 502 insertions, 0 deletions

diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
new file mode 100644
index 000000000000..0744731c6229
--- /dev/null
+++ b/drivers/clk/tegra/clk.h
@@ -0,0 +1,502 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TEGRA_CLK_H
+#define __TEGRA_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+/**
+ * struct tegra_clk_sync_source - external clock source from codec
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: input frequency from source
+ * @max_rate: max rate allowed
+ */
+struct tegra_clk_sync_source {
+	struct		clk_hw hw;
+	unsigned long	rate;
+	unsigned long	max_rate;
+};
+
+#define to_clk_sync_source(_hw)					\
+	container_of(_hw, struct tegra_clk_sync_source, hw)
+
+extern const struct clk_ops tegra_clk_sync_source_ops;
+struct clk *tegra_clk_register_sync_source(const char *name,
+		unsigned long fixed_rate, unsigned long max_rate);
+
+/**
+ * struct tegra_clk_frac_div - fractional divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register containing divider
+ * @flags:	hardware-specific flags
+ * @shift:	shift to the divider bit field
+ * @width:	width of the divider bit field
+ * @frac_width:	width of the fractional bit field
+ * @lock:	register lock
+ *
+ * Flags:
+ * TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value.
+ * TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this
+ *      flag indicates that this divider is for fixed rate PLL.
+ * TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when
+ *      fraction bit is set. This flags indicates to calculate divider for which
+ *      fracton bit will be zero.
+ * TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is
+ *      set when divider value is not 0. This flags indicates that the divider
+ *      is for UART module.
+ */
+struct tegra_clk_frac_div {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		flags;
+	u8		shift;
+	u8		width;
+	u8		frac_width;
+	spinlock_t	*lock;
+};
+
+#define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw)
+
+#define TEGRA_DIVIDER_ROUND_UP BIT(0)
+#define TEGRA_DIVIDER_FIXED BIT(1)
+#define TEGRA_DIVIDER_INT BIT(2)
+#define TEGRA_DIVIDER_UART BIT(3)
+
+extern const struct clk_ops tegra_clk_frac_div_ops;
+struct clk *tegra_clk_register_divider(const char *name,
+		const char *parent_name, void __iomem *reg,
+		unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
+		u8 frac_width, spinlock_t *lock);
+
+/*
+ * Tegra PLL:
+ *
+ * In general, there are 3 requirements for each PLL
+ * that SW needs to be comply with.
+ * (1) Input frequency range (REF).
+ * (2) Comparison frequency range (CF). CF = REF/DIVM.
+ * (3) VCO frequency range (VCO).  VCO = CF * DIVN.
+ *
+ * The final PLL output frequency (FO) = VCO >> DIVP.
+ */
+
+/**
+ * struct tegra_clk_pll_freq_table - PLL frequecy table
+ *
+ * @input_rate:		input rate from source
+ * @output_rate:	output rate from PLL for the input rate
+ * @n:			feedback divider
+ * @m:			input divider
+ * @p:			post divider
+ * @cpcon:		charge pump current
+ */
+struct tegra_clk_pll_freq_table {
+	unsigned long	input_rate;
+	unsigned long	output_rate;
+	u16		n;
+	u16		m;
+	u8		p;
+	u8		cpcon;
+};
+
+/**
+ * struct clk_pll_params - PLL parameters
+ *
+ * @input_min:			Minimum input frequency
+ * @input_max:			Maximum input frequency
+ * @cf_min:			Minimum comparison frequency
+ * @cf_max:			Maximum comparison frequency
+ * @vco_min:			Minimum VCO frequency
+ * @vco_max:			Maximum VCO frequency
+ * @base_reg:			PLL base reg offset
+ * @misc_reg:			PLL misc reg offset
+ * @lock_reg:			PLL lock reg offset
+ * @lock_bit_idx:		Bit index for PLL lock status
+ * @lock_enable_bit_idx:	Bit index to enable PLL lock
+ * @lock_delay:			Delay in us if PLL lock is not used
+ */
+struct tegra_clk_pll_params {
+	unsigned long	input_min;
+	unsigned long	input_max;
+	unsigned long	cf_min;
+	unsigned long	cf_max;
+	unsigned long	vco_min;
+	unsigned long	vco_max;
+
+	u32		base_reg;
+	u32		misc_reg;
+	u32		lock_reg;
+	u32		lock_bit_idx;
+	u32		lock_enable_bit_idx;
+	int		lock_delay;
+};
+
+/**
+ * struct tegra_clk_pll - Tegra PLL clock
+ *
+ * @hw:		handle between common and hardware-specifix interfaces
+ * @clk_base:	address of CAR controller
+ * @pmc:	address of PMC, required to read override bits
+ * @freq_table:	array of frequencies supported by PLL
+ * @params:	PLL parameters
+ * @flags:	PLL flags
+ * @fixed_rate:	PLL rate if it is fixed
+ * @lock:	register lock
+ * @divn_shift:	shift to the feedback divider bit field
+ * @divn_width:	width of the feedback divider bit field
+ * @divm_shift:	shift to the input divider bit field
+ * @divm_width:	width of the input divider bit field
+ * @divp_shift:	shift to the post divider bit field
+ * @divp_width:	width of the post divider bit field
+ *
+ * Flags:
+ * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
+ *     PLL locking. If not set it will use lock_delay value to wait.
+ * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
+ *     to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
+ *     to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
+ *     to be programmed to change output frequency of the PLL.
+ * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
+ *     that it is PLLU and invert post divider value.
+ * TEGRA_PLLM - PLLM has additional override settings in PMC. This
+ *     flag indicates that it is PLLM and use override settings.
+ * TEGRA_PLL_FIXED - We are not supposed to change output frequency
+ *     of some plls.
+ * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ */
+struct tegra_clk_pll {
+	struct clk_hw	hw;
+	void __iomem	*clk_base;
+	void __iomem	*pmc;
+	u8		flags;
+	unsigned long	fixed_rate;
+	spinlock_t	*lock;
+	u8		divn_shift;
+	u8		divn_width;
+	u8		divm_shift;
+	u8		divm_width;
+	u8		divp_shift;
+	u8		divp_width;
+	struct tegra_clk_pll_freq_table	*freq_table;
+	struct tegra_clk_pll_params	*params;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
+
+#define TEGRA_PLL_USE_LOCK BIT(0)
+#define TEGRA_PLL_HAS_CPCON BIT(1)
+#define TEGRA_PLL_SET_LFCON BIT(2)
+#define TEGRA_PLL_SET_DCCON BIT(3)
+#define TEGRA_PLLU BIT(4)
+#define TEGRA_PLLM BIT(5)
+#define TEGRA_PLL_FIXED BIT(6)
+#define TEGRA_PLLE_CONFIGURE BIT(7)
+
+extern const struct clk_ops tegra_clk_pll_ops;
+extern const struct clk_ops tegra_clk_plle_ops;
+struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
+		void __iomem *clk_base, void __iomem *pmc,
+		unsigned long flags, unsigned long fixed_rate,
+		struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+		struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
+		void __iomem *clk_base, void __iomem *pmc,
+		unsigned long flags, unsigned long fixed_rate,
+		struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+		struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+
+/**
+ * struct tegra_clk_pll_out - PLL divider down clock
+ *
+ * @hw:			handle between common and hardware-specific interfaces
+ * @reg:		register containing the PLL divider
+ * @enb_bit_idx:	bit to enable/disable PLL divider
+ * @rst_bit_idx:	bit to reset PLL divider
+ * @lock:		register lock
+ * @flags:		hardware-specific flags
+ */
+struct tegra_clk_pll_out {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		enb_bit_idx;
+	u8		rst_bit_idx;
+	spinlock_t	*lock;
+	u8		flags;
+};
+
+#define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
+
+extern const struct clk_ops tegra_clk_pll_out_ops;
+struct clk *tegra_clk_register_pll_out(const char *name,
+		const char *parent_name, void __iomem *reg, u8 enb_bit_idx,
+		u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags,
+		spinlock_t *lock);
+
+/**
+ * struct tegra_clk_periph_regs -  Registers controlling peripheral clock
+ *
+ * @enb_reg:		read the enable status
+ * @enb_set_reg:	write 1 to enable clock
+ * @enb_clr_reg:	write 1 to disable clock
+ * @rst_reg:		read the reset status
+ * @rst_set_reg:	write 1 to assert the reset of peripheral
+ * @rst_clr_reg:	write 1 to deassert the reset of peripheral
+ */
+struct tegra_clk_periph_regs {
+	u32 enb_reg;
+	u32 enb_set_reg;
+	u32 enb_clr_reg;
+	u32 rst_reg;
+	u32 rst_set_reg;
+	u32 rst_clr_reg;
+};
+
+/**
+ * struct tegra_clk_periph_gate - peripheral gate clock
+ *
+ * @magic:		magic number to validate type
+ * @hw:			handle between common and hardware-specific interfaces
+ * @clk_base:		address of CAR controller
+ * @regs:		Registers to control the peripheral
+ * @flags:		hardware-specific flags
+ * @clk_num:		Clock number
+ * @enable_refcnt:	array to maintain reference count of the clock
+ *
+ * Flags:
+ * TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed
+ *     for this module.
+ * TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module
+ *     after clock enable and driver for the module is responsible for
+ *     doing reset.
+ * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
+ *     bus to flush the write operation in apb bus. This flag indicates
+ *     that this peripheral is in apb bus.
+ */
+struct tegra_clk_periph_gate {
+	u32			magic;
+	struct clk_hw		hw;
+	void __iomem		*clk_base;
+	u8			flags;
+	int			clk_num;
+	int			*enable_refcnt;
+	struct tegra_clk_periph_regs	*regs;
+};
+
+#define to_clk_periph_gate(_hw)					\
+	container_of(_hw, struct tegra_clk_periph_gate, hw)
+
+#define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309
+
+#define TEGRA_PERIPH_NO_RESET BIT(0)
+#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
+#define TEGRA_PERIPH_ON_APB BIT(2)
+
+void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
+extern const struct clk_ops tegra_clk_periph_gate_ops;
+struct clk *tegra_clk_register_periph_gate(const char *name,
+		const char *parent_name, u8 gate_flags, void __iomem *clk_base,
+		unsigned long flags, int clk_num,
+		struct tegra_clk_periph_regs *pregs, int *enable_refcnt);
+
+/**
+ * struct clk-periph - peripheral clock
+ *
+ * @magic:	magic number to validate type
+ * @hw:		handle between common and hardware-specific interfaces
+ * @mux:	mux clock
+ * @divider:	divider clock
+ * @gate:	gate clock
+ * @mux_ops:	mux clock ops
+ * @div_ops:	divider clock ops
+ * @gate_ops:	gate clock ops
+ */
+struct tegra_clk_periph {
+	u32			magic;
+	struct clk_hw		hw;
+	struct clk_mux		mux;
+	struct tegra_clk_frac_div	divider;
+	struct tegra_clk_periph_gate	gate;
+
+	const struct clk_ops	*mux_ops;
+	const struct clk_ops	*div_ops;
+	const struct clk_ops	*gate_ops;
+};
+
+#define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw)
+
+#define TEGRA_CLK_PERIPH_MAGIC 0x18221223
+
+extern const struct clk_ops tegra_clk_periph_ops;
+struct clk *tegra_clk_register_periph(const char *name,
+		const char **parent_names, int num_parents,
+		struct tegra_clk_periph *periph, void __iomem *clk_base,
+		u32 offset);
+struct clk *tegra_clk_register_periph_nodiv(const char *name,
+		const char **parent_names, int num_parents,
+		struct tegra_clk_periph *periph, void __iomem *clk_base,
+		u32 offset);
+
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags,		\
+			 _div_shift, _div_width, _div_frac_width,	\
+			 _div_flags, _clk_num, _enb_refcnt, _regs,	\
+			 _gate_flags)					\
+	{								\
+		.mux = {						\
+			.flags = _mux_flags,				\
+			.shift = _mux_shift,				\
+			.width = _mux_width,				\
+		},							\
+		.divider = {						\
+			.flags = _div_flags,				\
+			.shift = _div_shift,				\
+			.width = _div_width,				\
+			.frac_width = _div_frac_width,			\
+		},							\
+		.gate = {						\
+			.flags = _gate_flags,				\
+			.clk_num = _clk_num,				\
+			.enable_refcnt = _enb_refcnt,			\
+			.regs = _regs,					\
+		},							\
+		.mux_ops = &clk_mux_ops,				\
+		.div_ops = &tegra_clk_frac_div_ops,			\
+		.gate_ops = &tegra_clk_periph_gate_ops,			\
+	}
+
+struct tegra_periph_init_data {
+	const char *name;
+	int clk_id;
+	const char **parent_names;
+	int num_parents;
+	struct tegra_clk_periph periph;
+	u32 offset;
+	const char *con_id;
+	const char *dev_id;
+};
+
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
+			_mux_shift, _mux_width, _mux_flags, _div_shift,	\
+			_div_width, _div_frac_width, _div_flags, _regs,	\
+			_clk_num, _enb_refcnt, _gate_flags, _clk_id)	\
+	{								\
+		.name = _name,						\
+		.clk_id = _clk_id,					\
+		.parent_names = _parent_names,				\
+		.num_parents = ARRAY_SIZE(_parent_names),		\
+		.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width,	\
+					   _mux_flags, _div_shift,	\
+					   _div_width, _div_frac_width,	\
+					   _div_flags, _clk_num,	\
+					   _enb_refcnt, _regs,		\
+					   _gate_flags),		\
+		.offset = _offset,					\
+		.con_id = _con_id,					\
+		.dev_id = _dev_id,					\
+	}
+
+/**
+ * struct clk_super_mux - super clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register controlling multiplexer
+ * @width:	width of the multiplexer bit field
+ * @flags:	hardware-specific flags
+ * @div2_index:	bit controlling divide-by-2
+ * @pllx_index:	PLLX index in the parent list
+ * @lock:	register lock
+ *
+ * Flags:
+ * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
+ *     that this is LP cluster clock.
+ */
+struct tegra_clk_super_mux {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		width;
+	u8		flags;
+	u8		div2_index;
+	u8		pllx_index;
+	spinlock_t	*lock;
+};
+
+#define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
+
+#define TEGRA_DIVIDER_2 BIT(0)
+
+extern const struct clk_ops tegra_clk_super_ops;
+struct clk *tegra_clk_register_super_mux(const char *name,
+		const char **parent_names, u8 num_parents,
+		unsigned long flags, void __iomem *reg, u8 clk_super_flags,
+		u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock);
+
+/**
+ * struct clk_init_tabel - clock initialization table
+ * @clk_id:	clock id as mentioned in device tree bindings
+ * @parent_id:	parent clock id as mentioned in device tree bindings
+ * @rate:	rate to set
+ * @state:	enable/disable
+ */
+struct tegra_clk_init_table {
+	unsigned int	clk_id;
+	unsigned int	parent_id;
+	unsigned long	rate;
+	int		state;
+};
+
+/**
+ * struct clk_duplicate - duplicate clocks
+ * @clk_id:	clock id as mentioned in device tree bindings
+ * @lookup:	duplicate lookup entry for the clock
+ */
+struct tegra_clk_duplicate {
+	int			clk_id;
+	struct clk_lookup	lookup;
+};
+
+#define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \
+	{					\
+		.clk_id = _clk_id,		\
+		.lookup = {			\
+			.dev_id = _dev,		\
+			.con_id = _con,		\
+		},				\
+	}
+
+void tegra_init_from_table(struct tegra_clk_init_table *tbl,
+		struct clk *clks[], int clk_max);
+
+void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
+		struct clk *clks[], int clk_max);
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+void tegra20_clock_init(struct device_node *np);
+#else
+static inline void tegra20_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA_2x_SOC */
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void tegra30_clock_init(struct device_node *np);
+#else
+static inline void tegra30_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
+
+#endif /* TEGRA_CLK_H */