Merge branch 'origin'

Conflicts:
	Documentation/video4linux/CARDLIST.cx88
	drivers/media/video/cx88/Kconfig
	drivers/media/video/em28xx/em28xx-video.c
	drivers/media/video/saa7134/saa7134-dvb.c

Resolved as in the original merge by Mauro Carvalho Chehab

1 files changed, 0 insertions, 142 deletions

diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
index 217ff09f2fa1..89bd94eb45be 100644
--- a/drivers/char/rio/cirrus.h
+++ b/drivers/char/rio/cirrus.h
@@ -40,148 +40,6 @@
 #endif
 #define _cirrus_h 1
 
-#ifdef RTA
-#define	TO_UART	RX
-#define TO_DRIVER TX
-#endif
-
-#ifdef HOST
-#define	TO_UART	TX
-#define TO_DRIVER RX
-#endif
-#ifdef RTA
-/* Miscellaneous defines for CIRRUS addresses and related logic for
-   interrupts etc.
-*/
-#define	MAP(a)		((short *)(cirrus_base + (a)))
-#define outp(a,b)	(*MAP (a) =(b))
-#define inp(a)		((*MAP (a)) & 0xff)
-#define	CIRRUS_FIRST	(short*)0x7300
-#define	CIRRUS_SECOND	(short*)0x7200
-#define	CIRRUS_THIRD	(short*)0x7100
-#define	CIRRUS_FOURTH	(short*)0x7000
-#define	PORTS_ON_CIRRUS	4
-#define	CIRRUS_FIFO_SIZE	12
-#define	SPACE		0x20
-#define	TAB		0x09
-#define	LINE_FEED	0x0a
-#define	CARRIAGE_RETURN	0x0d
-#define	BACKSPACE	0x08
-#define	SPACES_IN_TABS	8
-#define	SEND_ESCAPE	0x00
-#define START_BREAK	0x81
-#define	TIMER_TICK	0x82
-#define STOP_BREAK	0x83
-#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
-#define txack1	((short *)0x7104)
-#define rxack1	((short *)0x7102)
-#define mdack1  ((short *)0x7106)
-#define txack2  ((short *)0x7006)
-#define rxack2	((short *)0x7004)
-#define mdack2  ((short *)0x7100)
-#define int_latch       ((short *) 0x7800)
-#define int_status      ((short *) 0x7c00)
-#define tx1_pending     0x20
-#define rx1_pending     0x10
-#define md1_pending     0x40
-#define tx2_pending     0x02
-#define rx2_pending     0x01
-#define md2_pending     0x40
-#define module1_bits	0x07
-#define module1_modern	0x08
-#define module2_bits	0x70
-#define module2_modern	0x80
-#define module_blank	0xf
-#define rs232_d25	0x0
-#define	rs232_rj45	0x1
-#define rs422_d25	0x3
-#define parallel	0x5
-
-#define	CLK0	0x00
-#define CLK1	0x01
-#define CLK2	0x02
-#define CLK3	0x03
-#define CLK4	0x04
-
-#define CIRRUS_REVC    0x42
-#define CIRRUS_REVE    0x44
-
-#define	TURNON	1
-#define TURNOFF 0
-
-/* The list of CIRRUS registers. 
-   NB. These registers are relative values on 8 bit boundaries whereas
-   on the RTA's the CIRRUS registers are on word boundaries. Use pointer
-   arithmetic (short *) to obtain the real addresses required */
-#define ccr	0x05		/* Channel Command Register     */
-#define ier	0x06		/* Interrupt Enable Register    */
-#define cor1	0x08		/* Channel Option Register 1    */
-#define cor2	0x09		/* Channel Option Register 2    */
-#define cor3	0x0a		/* Channel Option Register 3    */
-#define cor4	0x1e		/* Channel Option Register 4    */
-#define	cor5	0x1f		/* Channel Option Register 5    */
-
-#define ccsr	0x0b		/* Channel Control Status Register */
-#define rdcr	0x0e		/* Receive Data Count Register  */
-#define tdcr	0x12		/* Transmit Data Count Register */
-#define mcor1	0x15		/* Modem Change Option Register 1 */
-#define mcor2	0x16		/* Modem Change Option Regsiter 2 */
-
-#define livr	0x18		/* Local Interrupt Vector Register */
-#define schr1	0x1a		/* Special Character Register 1 */
-#define schr2	0x1b		/* Special Character Register 2 */
-#define schr3	0x1c		/* Special Character Register 3 */
-#define schr4	0x1d		/* Special Character Register 4 */
-
-#define rtr	0x20		/* Receive Timer Register */
-#define rtpr	0x21		/* Receive Timeout Period Register */
-#define lnc	0x24		/* Lnext character */
-
-#define rivr	0x43		/* Receive Interrupt Vector Register    */
-#define tivr	0x42		/* Transmit Interrupt Vector Register   */
-#define mivr	0x41		/* Modem Interrupt Vector Register      */
-#define gfrcr	0x40		/* Global Firmware Revision code Reg    */
-#define ricr	0x44		/* Receive Interrupting Channel Reg     */
-#define ticr	0x45		/* Transmit Interrupting Channel Reg    */
-#define micr	0x46		/* Modem Interrupting Channel Register  */
-
-#define gcr	0x4b		/* Global configuration register */
-#define misr    0x4c		/* Modem interrupt status register */
-
-#define rbusr	0x59
-#define tbusr	0x5a
-#define mbusr	0x5b
-
-#define eoir	0x60		/* End Of Interrupt Register */
-#define rdsr	0x62		/* Receive Data / Status Register */
-#define tdr	0x63		/* Transmit Data Register */
-#define svrr	0x67		/* Service Request Register */
-
-#define car	0x68		/* Channel Access Register */
-#define mir	0x69		/* Modem Interrupt Register */
-#define tir	0x6a		/* Transmit Interrupt Register */
-#define rir	0x6b		/* Receive Interrupt Register */
-#define msvr1	0x6c		/* Modem Signal Value Register 1 */
-#define msvr2	0x6d		/* Modem Signal Value Register 2 */
-#define psvr	0x6f		/* Printer Signal Value Register */
-
-#define tbpr	0x72		/* Transmit Baud Rate Period Register */
-#define tcor	0x76		/* Transmit Clock Option Register */
-
-#define rbpr	0x78		/* Receive Baud Rate Period Register */
-#define rber	0x7a		/* Receive Baud Rate Extension Register */
-#define rcor	0x7c		/* Receive Clock Option Register */
-#define ppr	0x7e		/* Prescalar Period Register    */
-
-/* Misc registers used for forcing the 1400 out of its reset woes */
-#define airl	0x6d
-#define airm	0x6e
-#define airh	0x6f
-#define btcr	0x66
-#define mtcr	0x6c
-#define tber	0x74
-
-#endif				/* #ifdef RTA */
 
 
 /* Bit fields for particular registers */