Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (79 commits)
  USB serial: update the console driver
  usb-serial: straighten out serial_open
  usb-serial: add missing tests and debug lines
  usb-serial: rename subroutines
  usb-serial: fix termios initialization logic
  usb-serial: acquire references when a new tty is installed
  usb-serial: change logic of serial lookups
  usb-serial: put subroutines in logical order
  usb-serial: change referencing of port and serial structures
  tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl
  tty: Char: mxser, add support for CP112UL
  uartlite: support shared interrupt lines
  tty: USB: serial/mct_u232, fix tty refcnt
  tty: riscom8, fix tty refcnt
  tty: riscom8, fix shutdown declaration
  TTY: fix typos
  tty: Power: fix suspend vt regression
  tty: vt: use printk_once
  tty: handle VT specific compat ioctls in vt driver
  n_tty: move echoctl check and clean up logic
  ...

1 files changed, 574 insertions, 1737 deletions

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index 2dafc2da0648..df5038bbcbc2 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -11,7 +11,7 @@
  * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>.
  * Modified and maintained by Marcio Saito <marcio@cyclades.com>.
  *
- * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (C) 2007-2009 Jiri Slaby <jirislaby@gmail.com>
  *
  * Much of the design and some of the code came from serial.c
  * which was copyright (C) 1991, 1992  Linus Torvalds.  It was
@@ -19,577 +19,9 @@
  * and then fixed as suggested by Michael K. Johnson 12/12/92.
  * Converted to pci probing and cleaned up by Jiri Slaby.
  *
- * This version supports shared IRQ's (only for PCI boards).
- *
- * Prevent users from opening non-existing Z ports.
- *
- * Revision 2.3.2.8   2000/07/06 18:14:16 ivan
- * Fixed the PCI detection function to work properly on Alpha systems.
- * Implemented support for TIOCSERGETLSR ioctl.
- * Implemented full support for non-standard baud rates.
- *
- * Revision 2.3.2.7   2000/06/01 18:26:34 ivan
- * Request PLX I/O region, although driver doesn't use it, to avoid
- * problems with other drivers accessing it.
- * Removed count for on-board buffer characters in cy_chars_in_buffer
- * (Cyclades-Z only).
- *
- * Revision 2.3.2.6   2000/05/05 13:56:05 ivan
- * Driver now reports physical instead of virtual memory addresses.
- * Masks were added to some Cyclades-Z read accesses.
- * Implemented workaround for PLX9050 bug that would cause a system lockup
- * in certain systems, depending on the MMIO addresses allocated to the
- * board.
- * Changed the Tx interrupt programming in the CD1400 chips to boost up
- * performance (Cyclom-Y only).
- * Code is now compliant with the new module interface (module_[init|exit]).
- * Make use of the PCI helper functions to access PCI resources.
- * Did some code "housekeeping".
- *
- * Revision 2.3.2.5   2000/01/19 14:35:33 ivan
- * Fixed bug in cy_set_termios on CRTSCTS flag turnoff.
- *
- * Revision 2.3.2.4   2000/01/17 09:19:40 ivan
- * Fixed SMP locking in Cyclom-Y interrupt handler.
- *
- * Revision 2.3.2.3   1999/12/28 12:11:39 ivan
- * Added a new cyclades_card field called nports to allow the driver to
- * know the exact number of ports found by the Z firmware after its load;
- * RX buffer contention prevention logic on interrupt op mode revisited
- * (Cyclades-Z only);
- * Revisited printk's for Z debug;
- * Driver now makes sure that the constant SERIAL_XMIT_SIZE is defined;
- *
- * Revision 2.3.2.2   1999/10/01 11:27:43 ivan
- * Fixed bug in cyz_poll that would make all ports but port 0
- * unable to transmit/receive data (Cyclades-Z only);
- * Implemented logic to prevent the RX buffer from being stuck with data
- * due to a driver / firmware race condition in interrupt op mode
- * (Cyclades-Z only);
- * Fixed bug in block_til_ready logic that would lead to a system crash;
- * Revisited cy_close spinlock usage;
- *
- * Revision 2.3.2.1   1999/09/28 11:01:22 ivan
- * Revisited CONFIG_PCI conditional compilation for PCI board support;
- * Implemented TIOCGICOUNT and TIOCMIWAIT ioctl support;
- * _Major_ cleanup on the Cyclades-Z interrupt support code / logic;
- * Removed CTS handling from the driver -- this is now completely handled
- * by the firmware (Cyclades-Z only);
- * Flush RX on-board buffers on a port open (Cyclades-Z only);
- * Fixed handling of ASYNC_SPD_* TTY flags;
- * Module unload now unmaps all memory area allocated by ioremap;
- *
- * Revision 2.3.1.1   1999/07/15 16:45:53 ivan
- * Removed CY_PROC conditional compilation;
- * Implemented SMP-awareness for the driver;
- * Implemented a new ISA IRQ autoprobe that uses the irq_probe_[on|off]
- * functions;
- * The driver now accepts memory addresses (maddr=0xMMMMM) and IRQs
- * (irq=NN) as parameters (only for ISA boards);
- * Fixed bug in set_line_char that would prevent the Cyclades-Z
- * ports from being configured at speeds above 115.2Kbps;
- * Fixed bug in cy_set_termios that would prevent XON/XOFF flow control
- * switching from working properly;
- * The driver now only prints IRQ info for the Cyclades-Z if it's
- * configured to work in interrupt mode;
- *
- * Revision 2.2.2.3   1999/06/28 11:13:29 ivan
- * Added support for interrupt mode operation for the Z cards;
- * Removed the driver inactivity control for the Z;
- * Added a missing MOD_DEC_USE_COUNT in the cy_open function for when
- * the Z firmware is not loaded yet;
- * Replaced the "manual" Z Tx flush buffer by a call to a FW command of
- * same functionality;
- * Implemented workaround for IRQ setting loss on the PCI configuration
- * registers after a PCI bridge EEPROM reload (affects PLX9060 only);
- *
- * Revision 2.2.2.2  1999/05/14 17:18:15 ivan
- * /proc entry location changed to /proc/tty/driver/cyclades;
- * Added support to shared IRQ's (only for PCI boards);
- * Added support for Cobalt Qube2 systems;
- * IRQ [de]allocation scheme revisited;
- * BREAK implementation changed in order to make use of the 'break_ctl'
- * TTY facility;
- * Fixed typo in TTY structure field 'driver_name';
- * Included a PCI bridge reset and EEPROM reload in the board
- * initialization code (for both Y and Z series).
- *
- * Revision 2.2.2.1  1999/04/08 16:17:43 ivan
- * Fixed a bug in cy_wait_until_sent that was preventing the port to be
- * closed properly after a SIGINT;
- * Module usage counter scheme revisited;
- * Added support to the upcoming Y PCI boards (i.e., support to additional
- * PCI Device ID's).
- *
- * Revision 2.2.1.10 1999/01/20 16:14:29 ivan
- * Removed all unnecessary page-alignement operations in ioremap calls
- * (ioremap is currently safe for these operations).
- *
- * Revision 2.2.1.9  1998/12/30 18:18:30 ivan
- * Changed access to PLX PCI bridge registers from I/O to MMIO, in
- * order to make PLX9050-based boards work with certain motherboards.
- *
- * Revision 2.2.1.8  1998/11/13 12:46:20 ivan
- * cy_close function now resets (correctly) the tty->closing flag;
- * JIFFIES_DIFF macro fixed.
- *
- * Revision 2.2.1.7  1998/09/03 12:07:28 ivan
- * Fixed bug in cy_close function, which was not informing HW of
- * which port should have the reception disabled before doing so;
- * fixed Cyclom-8YoP hardware detection bug.
- *
- * Revision 2.2.1.6  1998/08/20 17:15:39 ivan
- * Fixed bug in cy_close function, which causes malfunction
- * of one of the first 4 ports when a higher port is closed
- * (Cyclom-Y only).
- *
- * Revision 2.2.1.5  1998/08/10 18:10:28 ivan
- * Fixed Cyclom-4Yo hardware detection bug.
- *
- * Revision 2.2.1.4  1998/08/04 11:02:50 ivan
- * /proc/cyclades implementation with great collaboration of
- * Marc Lewis <marc@blarg.net>;
- * cyy_interrupt was changed to avoid occurrence of kernel oopses
- * during PPP operation.
- *
- * Revision 2.2.1.3  1998/06/01 12:09:10 ivan
- * General code review in order to comply with 2.1 kernel standards;
- * data loss prevention for slow devices revisited (cy_wait_until_sent
- * was created);
- * removed conditional compilation for new/old PCI structure support
- * (now the driver only supports the new PCI structure).
- *
- * Revision 2.2.1.1  1998/03/19 16:43:12 ivan
- * added conditional compilation for new/old PCI structure support;
- * removed kernel series (2.0.x / 2.1.x) conditional compilation.
- *
- * Revision 2.1.1.3  1998/03/16 18:01:12 ivan
- * cleaned up the data loss fix;
- * fixed XON/XOFF handling once more (Cyclades-Z);
- * general review of the driver routines;
- * introduction of a mechanism to prevent data loss with slow
- * printers, by forcing a delay before closing the port.
- *
- * Revision 2.1.1.2  1998/02/17 16:50:00 ivan
- * fixed detection/handling of new CD1400 in Ye boards;
- * fixed XON/XOFF handling (Cyclades-Z);
- * fixed data loss caused by a premature port close;
- * introduction of a flag that holds the CD1400 version ID per port
- * (used by the CYGETCD1400VER new ioctl).
- *
- * Revision 2.1.1.1  1997/12/03 17:31:19 ivan
- * Code review for the module cleanup routine;
- * fixed RTS and DTR status report for new CD1400's in get_modem_info;
- * includes anonymous changes regarding signal_pending.
- *
- * Revision 2.1  1997/11/01 17:42:41 ivan
- * Changes in the driver to support Alpha systems (except 8Zo V_1);
- * BREAK fix for the Cyclades-Z boards;
- * driver inactivity control by FW implemented;
- * introduction of flag that allows driver to take advantage of
- * a special CD1400 feature related to HW flow control;
- * added support for the CD1400  rev. J (Cyclom-Y boards);
- * introduction of ioctls to:
- *  - control the rtsdtr_inv flag (Cyclom-Y);
- *  - control the rflow flag (Cyclom-Y);
- *  - adjust the polling interval (Cyclades-Z);
- *
- * Revision 1.36.4.33  1997/06/27 19:00:00  ivan
- * Fixes related to kernel version conditional
- * compilation.
- *
- * Revision 1.36.4.32  1997/06/14 19:30:00  ivan
- * Compatibility issues between kernels 2.0.x and
- * 2.1.x (mainly related to clear_bit function).
- *
- * Revision 1.36.4.31  1997/06/03 15:30:00  ivan
- * Changes to define the memory window according to the
- * board type.
- *
- * Revision 1.36.4.30  1997/05/16 15:30:00  daniel
- * Changes to support new cycladesZ boards.
- *
- * Revision 1.36.4.29  1997/05/12 11:30:00  daniel
- * Merge of Bentson's and Daniel's version 1.36.4.28.
- * Corrects bug in cy_detect_pci: check if there are more
- * ports than the number of static structs allocated.
- * Warning message during initialization if this driver is
- * used with the new generation of cycladesZ boards.  Those
- * will be supported only in next release of the driver.
- * Corrects bug in cy_detect_pci and cy_detect_isa that
- * returned wrong number of VALID boards, when a cyclomY
- * was found with no serial modules connected.
- * Changes to use current (2.1.x) kernel subroutine names
- * and created macros for compilation with 2.0.x kernel,
- * instead of the other way around.
- *
- * Revision 1.36.4.28  1997/05/?? ??:00:00  bentson
- * Change queue_task_irq_off to queue_task_irq.
- * The inline function queue_task_irq_off (tqueue.h)
- * was removed from latest releases of 2.1.x kernel.
- * Use of macro __init to mark the initialization
- * routines, so memory can be reused.
- * Also incorporate implementation of critical region
- * in function cleanup_module() created by anonymous
- * linuxer.
- *
- * Revision 1.36.4.28  1997/04/25 16:00:00  daniel
- * Change to support new firmware that solves DCD problem:
- * application could fail to receive SIGHUP signal when DCD
- * varying too fast.
- *
- * Revision 1.36.4.27  1997/03/26 10:30:00  daniel
- * Changed for support linux versions 2.1.X.
- * Backward compatible with linux versions 2.0.X.
- * Corrected illegal use of filler field in
- * CH_CTRL struct.
- * Deleted some debug messages.
- *
- * Revision 1.36.4.26  1997/02/27 12:00:00  daniel
- * Included check for NULL tty pointer in cyz_poll.
- *
- * Revision 1.36.4.25  1997/02/26 16:28:30  bentson
- * Bill Foster at Blarg! Online services noticed that
- * some of the switch elements of -Z modem control
- * lacked a closing "break;"
- *
- * Revision 1.36.4.24  1997/02/24 11:00:00  daniel
- * Changed low water threshold for buffer xmit_buf
- *
- * Revision 1.36.4.23  1996/12/02 21:50:16  bentson
- * Marcio provided fix to modem status fetch for -Z
- *
- * Revision 1.36.4.22  1996/10/28 22:41:17  bentson
- * improve mapping of -Z control page (thanks to Steve
- * Price <stevep@fa.tdktca.com> for help on this)
- *
- * Revision 1.36.4.21  1996/09/10 17:00:10  bentson
- * shift from CPU-bound to memcopy in cyz_polling operation
- *
- * Revision 1.36.4.20  1996/09/09 18:30:32  Bentson
- * Added support to set and report higher speeds.
- *
- * Revision 1.36.4.19c  1996/08/09 10:00:00  Marcio Saito
- * Some fixes in the HW flow control for the BETA release.
- * Don't try to register the IRQ.
- *
- * Revision 1.36.4.19  1996/08/08 16:23:18  Bentson
- * make sure "cyc" appears in all kernel messages; all soft interrupts
- * handled by same routine; recognize out-of-band reception; comment
- * out some diagnostic messages; leave RTS/CTS flow control to hardware;
- * fix race condition in -Z buffer management; only -Y needs to explicitly
- * flush chars; tidy up some startup messages;
- *
- * Revision 1.36.4.18  1996/07/25 18:57:31  bentson
- * shift MOD_INC_USE_COUNT location to match
- * serial.c; purge some diagnostic messages;
- *
- * Revision 1.36.4.17  1996/07/25 18:01:08  bentson
- * enable modem status messages and fetch & process them; note
- * time of last activity type for each port; set_line_char now
- * supports more than line 0 and treats 0 baud correctly;
- * get_modem_info senses rs_status;
- *
- * Revision 1.36.4.16  1996/07/20 08:43:15  bentson
- * barely works--now's time to turn on
- * more features 'til it breaks
- *
- * Revision 1.36.4.15  1996/07/19 22:30:06  bentson
- * check more -Z board status; shorten boot message
- *
- * Revision 1.36.4.14  1996/07/19 22:20:37  bentson
- * fix reference to ch_ctrl in startup; verify return
- * values from cyz_issue_cmd and cyz_update_channel;
- * more stuff to get modem control correct;
- *
- * Revision 1.36.4.13  1996/07/11 19:53:33  bentson
- * more -Z stuff folded in; re-order changes to put -Z stuff
- * after -Y stuff (to make changes clearer)
- *
- * Revision 1.36.4.12  1996/07/11 15:40:55  bentson
- * Add code to poll Cyclades-Z.  Add code to get & set RS-232 control.
- * Add code to send break.  Clear firmware ID word at startup (so
- * that other code won't talk to inactive board).
- *
- * Revision 1.36.4.11  1996/07/09 05:28:29  bentson
- * add code for -Z in set_line_char
- *
- * Revision 1.36.4.10  1996/07/08 19:28:37  bentson
- * fold more -Z stuff (or in some cases, error messages)
- * into driver; add text to "don't know what to do" messages.
- *
- * Revision 1.36.4.9  1996/07/08 18:38:38  bentson
- * moved compile-time flags near top of file; cosmetic changes
- * to narrow text (to allow 2-up printing); changed many declarations
- * to "static" to limit external symbols; shuffled code order to
- * coalesce -Y and -Z specific code, also to put internal functions
- * in order of tty_driver structure; added code to recognize -Z
- * ports (and for moment, do nothing or report error); add cy_startup
- * to parse boot command line for extra base addresses for ISA probes;
- *
- * Revision 1.36.4.8  1996/06/25 17:40:19  bentson
- * reorder some code, fix types of some vars (int vs. long),
- * add cy_setup to support user declared ISA addresses
- *
- * Revision 1.36.4.7  1996/06/21 23:06:18  bentson
- * dump ioctl based firmware load (it's now a user level
- * program); ensure uninitialzed ports cannot be used
- *
- * Revision 1.36.4.6  1996/06/20 23:17:19  bentson
- * rename vars and restructure some code
- *
- * Revision 1.36.4.5  1996/06/14 15:09:44  bentson
- * get right status back after boot load
- *
- * Revision 1.36.4.4  1996/06/13 19:51:44  bentson
- * successfully loads firmware
- *
- * Revision 1.36.4.3  1996/06/13 06:08:33  bentson
- * add more of the code for the boot/load ioctls
- *
- * Revision 1.36.4.2  1996/06/11 21:00:51  bentson
- * start to add Z functionality--starting with ioctl
- * for loading firmware
- *
- * Revision 1.36.4.1  1996/06/10 18:03:02  bentson
- * added code to recognize Z/PCI card at initialization; report
- * presence, but card is not initialized (because firmware needs
- * to be loaded)
- *
- * Revision 1.36.3.8  1996/06/07 16:29:00  bentson
- * starting minor number at zero; added missing verify_area
- * as noted by Heiko Eißfeldt <heiko@colossus.escape.de>
- *
- * Revision 1.36.3.7  1996/04/19 21:06:18  bentson
- * remove unneeded boot message & fix CLOCAL hardware flow
- * control (Miquel van Smoorenburg <miquels@Q.cistron.nl>);
- * remove unused diagnostic statements; minor 0 is first;
- *
- * Revision 1.36.3.6  1996/03/13 13:21:17  marcio
- * The kernel function vremap (available only in later 1.3.xx kernels)
- * allows the access to memory addresses above the RAM. This revision
- * of the driver supports PCI boards below 1Mb (device id 0x100) and
- * above 1Mb (device id 0x101).
- *
- * Revision 1.36.3.5  1996/03/07 15:20:17  bentson
- * Some global changes to interrupt handling spilled into
- * this driver--mostly unused arguments in system function
- * calls.  Also added change by Marcio Saito which should
- * reduce lost interrupts at startup by fast processors.
- *
- * Revision 1.36.3.4  1995/11/13  20:45:10  bentson
- * Changes by Corey Minyard <minyard@wf-rch.cirr.com> distributed
- * in 1.3.41 kernel to remove a possible race condition, extend
- * some error messages, and let the driver run as a loadable module
- * Change by Alan Wendt <alan@ez0.ezlink.com> to remove a
- * possible race condition.
- * Change by Marcio Saito <marcio@cyclades.com> to fix PCI addressing.
- *
- * Revision 1.36.3.3  1995/11/13  19:44:48  bentson
- * Changes by Linus Torvalds in 1.3.33 kernel distribution
- * required due to reordering of driver initialization.
- * Drivers are now initialized *after* memory management.
- *
- * Revision 1.36.3.2  1995/09/08  22:07:14  bentson
- * remove printk from ISR; fix typo
- *
- * Revision 1.36.3.1  1995/09/01  12:00:42  marcio
- * Minor fixes in the PCI board support. PCI function calls in
- * conditional compilation (CONFIG_PCI). Thanks to Jim Duncan
- * <duncan@okay.com>. "bad serial count" message removed.
- *
- * Revision 1.36.3  1995/08/22  09:19:42  marcio
- * Cyclom-Y/PCI support added. Changes in the cy_init routine and
- * board initialization. Changes in the boot messages. The driver
- * supports up to 4 boards and 64 ports by default.
- *
- * Revision 1.36.1.4  1995/03/29  06:14:14  bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Revision 1.36.1.3  1995/03/23  22:15:35  bentson
- * add missing break in modem control block in ioctl switch statement
- * (discovered by Michael Edward Chastain <mec@jobe.shell.portal.com>);
- *
- * Revision 1.36.1.2  1995/03/22  19:16:22  bentson
- * make sure CTS flow control is set as soon as possible (thanks
- * to note from David Lambert <lambert@chesapeake.rps.slb.com>);
- *
- * Revision 1.36.1.1  1995/03/13  15:44:43  bentson
- * initialize defaults for receive threshold and stale data timeout;
- * cosmetic changes;
- *
- * Revision 1.36  1995/03/10  23:33:53  bentson
- * added support of chips 4-7 in 32 port Cyclom-Ye;
- * fix cy_interrupt pointer dereference problem
- * (Joe Portman <baron@aa.net>);
- * give better error response if open is attempted on non-existent port
- * (Zachariah Vaum <jchryslr@netcom.com>);
- * correct command timeout (Kenneth Lerman <lerman@@seltd.newnet.com>);
- * conditional compilation for -16Y on systems with fast, noisy bus;
- * comment out diagnostic print function;
- * cleaned up table of base addresses;
- * set receiver time-out period register to correct value,
- * set receive threshold to better default values,
- * set chip timer to more accurate 200 Hz ticking,
- * add code to monitor and modify receive parameters
- * (Rik Faith <faith@cs.unc.edu> Nick Simicich
- * <njs@scifi.emi.net>);
- *
- * Revision 1.35  1994/12/16  13:54:18  steffen
- * additional patch by Marcio Saito for board detection
- * Accidently left out in 1.34
- *
- * Revision 1.34  1994/12/10  12:37:12  steffen
- * This is the corrected version as suggested by Marcio Saito
- *
- * Revision 1.33  1994/12/01  22:41:18  bentson
- * add hooks to support more high speeds directly; add tytso
- * patch regarding CLOCAL wakeups
- *
- * Revision 1.32  1994/11/23  19:50:04  bentson
- * allow direct kernel control of higher signalling rates;
- * look for cards at additional locations
- *
- * Revision 1.31  1994/11/16  04:33:28  bentson
- * ANOTHER fix from Corey Minyard, minyard@wf-rch.cirr.com--
- * a problem in chars_in_buffer has been resolved by some
- * small changes;  this should yield smoother output
- *
- * Revision 1.30  1994/11/16  04:28:05  bentson
- * Fix from Corey Minyard, Internet: minyard@metronet.com,
- * UUCP: minyard@wf-rch.cirr.com, WORK: minyardbnr.ca, to
- * cy_hangup that appears to clear up much (all?) of the
- * DTR glitches; also he's added/cleaned-up diagnostic messages
- *
- * Revision 1.29  1994/11/16  04:16:07  bentson
- * add change proposed by Ralph Sims, ralphs@halcyon.com, to
- * operate higher speeds in same way as other serial ports;
- * add more serial ports (for up to two 16-port muxes).
- *
- * Revision 1.28  1994/11/04  00:13:16  root
- * turn off diagnostic messages
- *
- * Revision 1.27  1994/11/03  23:46:37  root
- * bunch of changes to bring driver into greater conformance
- * with the serial.c driver (looking for missed fixes)
- *
- * Revision 1.26  1994/11/03  22:40:36  root
- * automatic interrupt probing fixed.
- *
- * Revision 1.25  1994/11/03  20:17:02  root
- * start to implement auto-irq
- *
- * Revision 1.24  1994/11/03  18:01:55  root
- * still working on modem signals--trying not to drop DTR
- * during the getty/login processes
- *
- * Revision 1.23  1994/11/03  17:51:36  root
- * extend baud rate support; set receive threshold as function
- * of baud rate; fix some problems with RTS/CTS;
- *
- * Revision 1.22  1994/11/02  18:05:35  root
- * changed arguments to udelay to type long to get
- * delays to be of correct duration
- *
- * Revision 1.21  1994/11/02  17:37:30  root
- * employ udelay (after calibrating loops_per_second earlier
- * in init/main.c) instead of using home-grown delay routines
- *
- * Revision 1.20  1994/11/02  03:11:38  root
- * cy_chars_in_buffer forces a return value of 0 to let
- * login work (don't know why it does); some functions
- * that were returning EFAULT, now executes the code;
- * more work on deciding when to disable xmit interrupts;
- *
- * Revision 1.19  1994/11/01  20:10:14  root
- * define routine to start transmission interrupts (by enabling
- * transmit interrupts); directly enable/disable modem interrupts;
- *
- * Revision 1.18  1994/11/01  18:40:45  bentson
- * Don't always enable transmit interrupts in startup; interrupt on
- * TxMpty instead of TxRdy to help characters get out before shutdown;
- * restructure xmit interrupt to check for chars first and quit if
- * none are ready to go; modem status (MXVRx) is upright, _not_ inverted
- * (to my view);
- *
- * Revision 1.17  1994/10/30  04:39:45  bentson
- * rename serial_driver and callout_driver to cy_serial_driver and
- * cy_callout_driver to avoid linkage interference; initialize
- * info->type to PORT_CIRRUS; ruggedize paranoia test; elide ->port
- * from cyclades_port structure; add paranoia check to cy_close;
- *
- * Revision 1.16  1994/10/30  01:14:33  bentson
- * change major numbers; add some _early_ return statements;
- *
- * Revision 1.15  1994/10/29  06:43:15  bentson
- * final tidying up for clean compile;  enable some error reporting
- *
- * Revision 1.14  1994/10/28  20:30:22  Bentson
- * lots of changes to drag the driver towards the new tty_io
- * structures and operation.  not expected to work, but may
- * compile cleanly.
- *
- * Revision 1.13  1994/07/21  23:08:57  Bentson
- * add some diagnostic cruft; support 24 lines (for testing
- * both -8Y and -16Y cards; be more thorough in servicing all
- * chips during interrupt; add "volatile" a few places to
- * circumvent compiler optimizations; fix base & offset
- * computations in block_til_ready (was causing chip 0 to
- * stop operation)
- *
- * Revision 1.12  1994/07/19  16:42:11  Bentson
- * add some hackery for kernel version 1.1.8; expand
- * error messages; refine timing for delay loops and
- * declare loop params volatile
- *
- * Revision 1.11  1994/06/11  21:53:10  bentson
- * get use of save_car right in transmit interrupt service
- *
- * Revision 1.10.1.1  1994/06/11  21:31:18  bentson
- * add some diagnostic printing; try to fix save_car stuff
- *
- * Revision 1.10  1994/06/11  20:36:08  bentson
- * clean up compiler warnings
- *
- * Revision 1.9  1994/06/11  19:42:46  bentson
- * added a bunch of code to support modem signalling
- *
- * Revision 1.8  1994/06/11  17:57:07  bentson
- * recognize break & parity error
- *
- * Revision 1.7  1994/06/05  05:51:34  bentson
- * Reorder baud table to be monotonic; add cli to CP; discard
- * incoming characters and status if the line isn't open; start to
- * fold code into cy_throttle; start to port get_serial_info,
- * set_serial_info, get_modem_info, set_modem_info, and send_break
- * from serial.c; expand cy_ioctl; relocate and expand config_setup;
- * get flow control characters from tty struct; invalidate ports w/o
- * hardware;
- *
- * Revision 1.6  1994/05/31  18:42:21  bentson
- * add a loop-breaker in the interrupt service routine;
- * note when port is initialized so that it can be shut
- * down under the right conditions; receive works without
- * any obvious errors
- *
- * Revision 1.5  1994/05/30  00:55:02  bentson
- * transmit works without obvious errors
- *
- * Revision 1.4  1994/05/27  18:46:27  bentson
- * incorporated more code from lib_y.c; can now print short
- * strings under interrupt control to port zero; seems to
- * select ports/channels/lines correctly
- *
- * Revision 1.3  1994/05/25  22:12:44  bentson
- * shifting from multi-port on a card to proper multiplexor
- * data structures;  added skeletons of most routines
- *
- * Revision 1.2  1994/05/19  13:21:43  bentson
- * start to crib from other sources
- *
  */
 
-#define CY_VERSION	"2.5"
+#define CY_VERSION	"2.6"
 
 /* If you need to install more boards than NR_CARDS, change the constant
    in the definition below. No other change is necessary to support up to
@@ -648,9 +80,7 @@
 #include <linux/firmware.h>
 #include <linux/device.h>
 
-#include <asm/system.h>
 #include <linux/io.h>
-#include <asm/irq.h>
 #include <linux/uaccess.h>
 
 #include <linux/kernel.h>
@@ -660,13 +90,11 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 
-static void cy_throttle(struct tty_struct *tty);
 static void cy_send_xchar(struct tty_struct *tty, char ch);
 
 #ifndef SERIAL_XMIT_SIZE
 #define	SERIAL_XMIT_SIZE	(min(PAGE_SIZE, 4096))
 #endif
-#define WAKEUP_CHARS		256
 
 #define STD_COM_FLAGS (0)
 
@@ -756,25 +184,25 @@ static int cy_next_channel;	/* next minor available */
  *                                               HI            VHI
  *     20
  */
-static int baud_table[] = {
+static const int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
 	1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
 	230400, 0
 };
 
-static char baud_co_25[] = {	/* 25 MHz clock option table */
+static const char baud_co_25[] = {	/* 25 MHz clock option table */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
 	0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
-static char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
+static const char baud_bpr_25[] = {	/* 25 MHz baud rate period table */
 	0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
 	0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
 };
 
-static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
+static const char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	/* value =>    00    01   02    03    04 */
 	/* divide by    8    32   128   512  2048 */
 	0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03,
@@ -782,13 +210,13 @@ static char baud_co_60[] = {	/* 60 MHz clock option table (CD1400 J) */
 	0x00
 };
 
-static char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
+static const char baud_bpr_60[] = {	/* 60 MHz baud rate period table (CD1400 J) */
 	0x00, 0x82, 0x21, 0xff, 0xdb, 0xc3, 0x92, 0x62, 0xc3, 0x62,
 	0x41, 0xc3, 0x62, 0xc3, 0x62, 0xc3, 0x82, 0x62, 0x41, 0x32,
 	0x21
 };
 
-static char baud_cor3[] = {	/* receive threshold */
+static const char baud_cor3[] = {	/* receive threshold */
 	0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07,
 	0x07
@@ -805,7 +233,7 @@ static char baud_cor3[] = {	/* receive threshold */
  * cables.
  */
 
-static char rflow_thr[] = {	/* rflow threshold */
+static const char rflow_thr[] = {	/* rflow threshold */
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
 	0x0a
@@ -814,7 +242,7 @@ static char rflow_thr[] = {	/* rflow threshold */
 /*  The Cyclom-Ye has placed the sequential chips in non-sequential
  *  address order.  This look-up table overcomes that problem.
  */
-static int cy_chip_offset[] = { 0x0000,
+static const unsigned int cy_chip_offset[] = { 0x0000,
 	0x0400,
 	0x0800,
 	0x0C00,
@@ -827,7 +255,7 @@ static int cy_chip_offset[] = { 0x0000,
 /* PCI related definitions */
 
 #ifdef CONFIG_PCI
-static struct pci_device_id cy_pci_dev_id[] __devinitdata = {
+static const struct pci_device_id cy_pci_dev_id[] = {
 	/* PCI < 1Mb */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) },
 	/* PCI > 1Mb */
@@ -850,7 +278,7 @@ MODULE_DEVICE_TABLE(pci, cy_pci_dev_id);
 #endif
 
 static void cy_start(struct tty_struct *);
-static void set_line_char(struct cyclades_port *);
+static void cy_set_line_char(struct cyclades_port *, struct tty_struct *);
 static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32);
 #ifdef CONFIG_ISA
 static unsigned detect_isa_irq(void __iomem *);
@@ -869,6 +297,20 @@ static void cyz_rx_restart(unsigned long);
 static struct timer_list cyz_rx_full_timer[NR_PORTS];
 #endif				/* CONFIG_CYZ_INTR */
 
+static inline void cyy_writeb(struct cyclades_port *port, u32 reg, u8 val)
+{
+	struct cyclades_card *card = port->card;
+
+	cy_writeb(port->u.cyy.base_addr + (reg << card->bus_index), val);
+}
+
+static inline u8 cyy_readb(struct cyclades_port *port, u32 reg)
+{
+	struct cyclades_card *card = port->card;
+
+	return readb(port->u.cyy.base_addr + (reg << card->bus_index));
+}
+
 static inline bool cy_is_Z(struct cyclades_card *card)
 {
 	return card->num_chips == (unsigned int)-1;
@@ -893,7 +335,7 @@ static inline bool cyz_is_loaded(struct cyclades_card *card)
 }
 
 static inline int serial_paranoia_check(struct cyclades_port *info,
-		char *name, const char *routine)
+		const char *name, const char *routine)
 {
 #ifdef SERIAL_PARANOIA_CHECK
 	if (!info) {
@@ -909,7 +351,7 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
 	}
 #endif
 	return 0;
-}				/* serial_paranoia_check */
+}
 
 /***********************************************************/
 /********* Start of block of Cyclom-Y specific code ********/
@@ -921,13 +363,14 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
 
    This function is only called from inside spinlock-protected code.
  */
-static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
+static int __cyy_issue_cmd(void __iomem *base_addr, u8 cmd, int index)
 {
+	void __iomem *ccr = base_addr + (CyCCR << index);
 	unsigned int i;
 
 	/* Check to see that the previous command has completed */
 	for (i = 0; i < 100; i++) {
-		if (readb(base_addr + (CyCCR << index)) == 0)
+		if (readb(ccr) == 0)
 			break;
 		udelay(10L);
 	}
@@ -937,10 +380,16 @@ static int cyy_issue_cmd(void __iomem *base_addr, u_char cmd, int index)
 		return -1;
 
 	/* Issue the new command */
-	cy_writeb(base_addr + (CyCCR << index), cmd);
+	cy_writeb(ccr, cmd);
 
 	return 0;
-}				/* cyy_issue_cmd */
+}
+
+static inline int cyy_issue_cmd(struct cyclades_port *port, u8 cmd)
+{
+	return __cyy_issue_cmd(port->u.cyy.base_addr, cmd,
+			port->card->bus_index);
+}
 
 #ifdef CONFIG_ISA
 /* ISA interrupt detection code */
@@ -960,12 +409,12 @@ static unsigned detect_isa_irq(void __iomem *address)
 
 	irqs = probe_irq_on();
 	/* Wait ... */
-	udelay(5000L);
+	msleep(5);
 
 	/* Enable the Tx interrupts on the CD1400 */
 	local_irq_save(flags);
 	cy_writeb(address + (CyCAR << index), 0);
-	cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
+	__cyy_issue_cmd(address, CyCHAN_CTL | CyENB_XMTR, index);
 
 	cy_writeb(address + (CyCAR << index), 0);
 	cy_writeb(address + (CySRER << index),
@@ -973,7 +422,7 @@ static unsigned detect_isa_irq(void __iomem *address)
 	local_irq_restore(flags);
 
 	/* Wait ... */
-	udelay(5000L);
+	msleep(5);
 
 	/* Check which interrupt is in use */
 	irq = probe_irq_off(irqs);
@@ -999,7 +448,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	struct cyclades_port *info;
 	struct tty_struct *tty;
 	int len, index = cinfo->bus_index;
-	u8 save_xir, channel, save_car, data, char_count;
+	u8 ivr, save_xir, channel, save_car, data, char_count;
 
 #ifdef CY_DEBUG_INTERRUPTS
 	printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
@@ -1008,26 +457,25 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 	save_xir = readb(base_addr + (CyRIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
-	save_car = readb(base_addr + (CyCAR << index));
-	cy_writeb(base_addr + (CyCAR << index), save_xir);
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
+	ivr = cyy_readb(info, CyRIVR) & CyIVRMask;
 
+	tty = tty_port_tty_get(&info->port);
 	/* if there is nowhere to put the data, discard it */
-	if (info->port.tty == NULL) {
-		if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
-				CyIVRRxEx) {	/* exception */
-			data = readb(base_addr + (CyRDSR << index));
+	if (tty == NULL) {
+		if (ivr == CyIVRRxEx) {	/* exception */
+			data = cyy_readb(info, CyRDSR);
 		} else {	/* normal character reception */
-			char_count = readb(base_addr + (CyRDCR << index));
+			char_count = cyy_readb(info, CyRDCR);
 			while (char_count--)
-				data = readb(base_addr + (CyRDSR << index));
+				data = cyy_readb(info, CyRDSR);
 		}
 		goto end;
 	}
 	/* there is an open port for this data */
-	tty = info->port.tty;
-	if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
-			CyIVRRxEx) {	/* exception */
-		data = readb(base_addr + (CyRDSR << index));
+	if (ivr == CyIVRRxEx) {	/* exception */
+		data = cyy_readb(info, CyRDSR);
 
 		/* For statistics only */
 		if (data & CyBREAK)
@@ -1041,28 +489,29 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 
 		if (data & info->ignore_status_mask) {
 			info->icount.rx++;
+			tty_kref_put(tty);
 			return;
 		}
 		if (tty_buffer_request_room(tty, 1)) {
 			if (data & info->read_status_mask) {
 				if (data & CyBREAK) {
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_BREAK);
+						cyy_readb(info, CyRDSR),
+						TTY_BREAK);
 					info->icount.rx++;
 					if (info->port.flags & ASYNC_SAK)
 						do_SAK(tty);
 				} else if (data & CyFRAME) {
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_FRAME);
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
 					info->icount.rx++;
 					info->idle_stats.frame_errs++;
 				} else if (data & CyPARITY) {
 					/* Pieces of seven... */
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_PARITY);
+						cyy_readb(info, CyRDSR),
+						TTY_PARITY);
 					info->icount.rx++;
 					info->idle_stats.parity_errs++;
 				} else if (data & CyOVERRUN) {
@@ -1074,8 +523,8 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 					   the next incoming character.
 					 */
 					tty_insert_flip_char(tty,
-						readb(base_addr + (CyRDSR <<
-							index)), TTY_FRAME);
+						cyy_readb(info, CyRDSR),
+						TTY_FRAME);
 					info->icount.rx++;
 					info->idle_stats.overruns++;
 				/* These two conditions may imply */
@@ -1099,7 +548,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		}
 	} else {	/* normal character reception */
 		/* load # chars available from the chip */
-		char_count = readb(base_addr + (CyRDCR << index));
+		char_count = cyy_readb(info, CyRDCR);
 
 #ifdef CY_ENABLE_MONITORING
 		++info->mon.int_count;
@@ -1110,7 +559,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 #endif
 		len = tty_buffer_request_room(tty, char_count);
 		while (len--) {
-			data = readb(base_addr + (CyRDSR << index));
+			data = cyy_readb(info, CyRDSR);
 			tty_insert_flip_char(tty, data, TTY_NORMAL);
 			info->idle_stats.recv_bytes++;
 			info->icount.rx++;
@@ -1121,16 +570,18 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
 		info->idle_stats.recv_idle = jiffies;
 	}
 	tty_schedule_flip(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyRIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyRIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int char_count, index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, outch;
 
@@ -1154,9 +605,9 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 		goto end;
 	}
 	info = &cinfo->ports[channel + chip * 4];
-	if (info->port.tty == NULL) {
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+	tty = tty_port_tty_get(&info->port);
+	if (tty == NULL) {
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
 		goto end;
 	}
 
@@ -1165,7 +616,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 
 	if (info->x_char) {	/* send special char */
 		outch = info->x_char;
-		cy_writeb(base_addr + (CyTDR << index), outch);
+		cyy_writeb(info, CyTDR, outch);
 		char_count--;
 		info->icount.tx++;
 		info->x_char = 0;
@@ -1173,14 +624,14 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 
 	if (info->breakon || info->breakoff) {
 		if (info->breakon) {
-			cy_writeb(base_addr + (CyTDR << index), 0);
-			cy_writeb(base_addr + (CyTDR << index), 0x81);
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x81);
 			info->breakon = 0;
 			char_count -= 2;
 		}
 		if (info->breakoff) {
-			cy_writeb(base_addr + (CyTDR << index), 0);
-			cy_writeb(base_addr + (CyTDR << index), 0x83);
+			cyy_writeb(info, CyTDR, 0);
+			cyy_writeb(info, CyTDR, 0x83);
 			info->breakoff = 0;
 			char_count -= 2;
 		}
@@ -1188,27 +639,23 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 
 	while (char_count-- > 0) {
 		if (!info->xmit_cnt) {
-			if (readb(base_addr + (CySRER << index)) & CyTxMpty) {
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) &
-						~CyTxMpty);
+			if (cyy_readb(info, CySRER) & CyTxMpty) {
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxMpty);
 			} else {
-				cy_writeb(base_addr + (CySRER << index),
-					(readb(base_addr + (CySRER << index)) &
-						~CyTxRdy) | CyTxMpty);
+				cyy_writeb(info, CySRER, CyTxMpty |
+					(cyy_readb(info, CySRER) & ~CyTxRdy));
 			}
 			goto done;
 		}
 		if (info->port.xmit_buf == NULL) {
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) &
-					~CyTxRdy);
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
 			goto done;
 		}
-		if (info->port.tty->stopped || info->port.tty->hw_stopped) {
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) &
-					~CyTxRdy);
+		if (tty->stopped || tty->hw_stopped) {
+			cyy_writeb(info, CySRER,
+				cyy_readb(info, CySRER) & ~CyTxRdy);
 			goto done;
 		}
 		/* Because the Embedded Transmit Commands have been enabled,
@@ -1225,15 +672,15 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 			info->xmit_cnt--;
 			info->xmit_tail = (info->xmit_tail + 1) &
 					(SERIAL_XMIT_SIZE - 1);
-			cy_writeb(base_addr + (CyTDR << index), outch);
+			cyy_writeb(info, CyTDR, outch);
 			info->icount.tx++;
 		} else {
 			if (char_count > 1) {
 				info->xmit_cnt--;
 				info->xmit_tail = (info->xmit_tail + 1) &
 					(SERIAL_XMIT_SIZE - 1);
-				cy_writeb(base_addr + (CyTDR << index), outch);
-				cy_writeb(base_addr + (CyTDR << index), 0);
+				cyy_writeb(info, CyTDR, outch);
+				cyy_writeb(info, CyTDR, 0);
 				info->icount.tx++;
 				char_count--;
 			}
@@ -1241,17 +688,19 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
 	}
 
 done:
-	tty_wakeup(info->port.tty);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyTIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 		void __iomem *base_addr)
 {
 	struct cyclades_port *info;
+	struct tty_struct *tty;
 	int index = cinfo->bus_index;
 	u8 save_xir, channel, save_car, mdm_change, mdm_status;
 
@@ -1259,13 +708,14 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	save_xir = readb(base_addr + (CyMIR << index));
 	channel = save_xir & CyIRChannel;
 	info = &cinfo->ports[channel + chip * 4];
-	save_car = readb(base_addr + (CyCAR << index));
-	cy_writeb(base_addr + (CyCAR << index), save_xir);
+	save_car = cyy_readb(info, CyCAR);
+	cyy_writeb(info, CyCAR, save_xir);
 
-	mdm_change = readb(base_addr + (CyMISR << index));
-	mdm_status = readb(base_addr + (CyMSVR1 << index));
+	mdm_change = cyy_readb(info, CyMISR);
+	mdm_status = cyy_readb(info, CyMSVR1);
 
-	if (!info->port.tty)
+	tty = tty_port_tty_get(&info->port);
+	if (!tty)
 		goto end;
 
 	if (mdm_change & CyANY_DELTA) {
@@ -1279,35 +729,32 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 		if (mdm_change & CyRI)
 			info->icount.rng++;
 
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 	}
 
 	if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
-		if (!(mdm_status & CyDCD)) {
-			tty_hangup(info->port.tty);
-			info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-		}
-		wake_up_interruptible(&info->port.open_wait);
+		if (mdm_status & CyDCD)
+			wake_up_interruptible(&info->port.open_wait);
+		else
+			tty_hangup(tty);
 	}
 	if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
-		if (info->port.tty->hw_stopped) {
+		if (tty->hw_stopped) {
 			if (mdm_status & CyCTS) {
 				/* cy_start isn't used
 				   because... !!! */
-				info->port.tty->hw_stopped = 0;
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) |
-						CyTxRdy);
-				tty_wakeup(info->port.tty);
+				tty->hw_stopped = 0;
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) | CyTxRdy);
+				tty_wakeup(tty);
 			}
 		} else {
 			if (!(mdm_status & CyCTS)) {
 				/* cy_stop isn't used
 				   because ... !!! */
-				info->port.tty->hw_stopped = 1;
-				cy_writeb(base_addr + (CySRER << index),
-					readb(base_addr + (CySRER << index)) &
-						~CyTxRdy);
+				tty->hw_stopped = 1;
+				cyy_writeb(info, CySRER,
+					cyy_readb(info, CySRER) & ~CyTxRdy);
 			}
 		}
 	}
@@ -1315,10 +762,11 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
 	}
 	if (mdm_change & CyRI) {
 	}*/
+	tty_kref_put(tty);
 end:
 	/* end of service */
-	cy_writeb(base_addr + (CyMIR << index), save_xir & 0x3f);
-	cy_writeb(base_addr + (CyCAR << index), save_car);
+	cyy_writeb(info, CyMIR, save_xir & 0x3f);
+	cyy_writeb(info, CyCAR, save_car);
 }
 
 /* The real interrupt service routine is called
@@ -1389,6 +837,56 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }				/* cyy_interrupt */
 
+static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
+		unsigned int clear)
+{
+	struct cyclades_card *card = info->card;
+	int channel = info->line - card->first_line;
+	u32 rts, dtr, msvrr, msvrd;
+
+	channel &= 0x03;
+
+	if (info->rtsdtr_inv) {
+		msvrr = CyMSVR2;
+		msvrd = CyMSVR1;
+		rts = CyDTR;
+		dtr = CyRTS;
+	} else {
+		msvrr = CyMSVR1;
+		msvrd = CyMSVR2;
+		rts = CyRTS;
+		dtr = CyDTR;
+	}
+	if (set & TIOCM_RTS) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, rts);
+	}
+	if (clear & TIOCM_RTS) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrr, ~rts);
+	}
+	if (set & TIOCM_DTR) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, dtr);
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
+#endif
+	}
+	if (clear & TIOCM_DTR) {
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, msvrd, ~dtr);
+#ifdef CY_DEBUG_DTR
+		printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
+			cyy_readb(info, CyMSVR1),
+			cyy_readb(info, CyMSVR2));
+#endif
+	}
+}
+
 /***********************************************************/
 /********* End of block of Cyclom-Y specific code **********/
 /******** Start of block of Cyclades-Z specific code *******/
@@ -1398,15 +896,9 @@ static int
 cyz_fetch_msg(struct cyclades_card *cinfo,
 		__u32 *channel, __u8 *cmd, __u32 *param)
 {
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	unsigned long loc_doorbell;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
-
 	loc_doorbell = readl(&cinfo->ctl_addr.p9060->loc_doorbell);
 	if (loc_doorbell) {
 		*cmd = (char)(0xff & loc_doorbell);
@@ -1422,19 +914,13 @@ static int
 cyz_issue_cmd(struct cyclades_card *cinfo,
 		__u32 channel, __u8 cmd, __u32 param)
 {
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	__u32 __iomem *pci_doorbell;
 	unsigned int index;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
 	if (!cyz_is_loaded(cinfo))
 		return -1;
 
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
-
 	index = 0;
 	pci_doorbell = &cinfo->ctl_addr.p9060->pci_doorbell;
 	while ((readl(pci_doorbell) & 0xff) != 0) {
@@ -1449,11 +935,10 @@ cyz_issue_cmd(struct cyclades_card *cinfo,
 	return 0;
 }				/* cyz_issue_cmd */
 
-static void cyz_handle_rx(struct cyclades_port *info,
-		struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_rx(struct cyclades_port *info, struct tty_struct *tty)
 {
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	unsigned int char_count;
 	int len;
 #ifdef BLOCKMOVE
@@ -1542,11 +1027,10 @@ static void cyz_handle_rx(struct cyclades_port *info,
 	}
 }
 
-static void cyz_handle_tx(struct cyclades_port *info,
-		struct BUF_CTRL __iomem *buf_ctrl)
+static void cyz_handle_tx(struct cyclades_port *info, struct tty_struct *tty)
 {
+	struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 	struct cyclades_card *cinfo = info->card;
-	struct tty_struct *tty = info->port.tty;
 	u8 data;
 	unsigned int char_count;
 #ifdef BLOCKMOVE
@@ -1621,34 +1105,24 @@ ztxdone:
 
 static void cyz_handle_cmd(struct cyclades_card *cinfo)
 {
+	struct BOARD_CTRL __iomem *board_ctrl = cinfo->board_ctrl;
 	struct tty_struct *tty;
 	struct cyclades_port *info;
-	static struct FIRM_ID __iomem *firm_id;
-	static struct ZFW_CTRL __iomem *zfw_ctrl;
-	static struct BOARD_CTRL __iomem *board_ctrl;
-	static struct CH_CTRL __iomem *ch_ctrl;
-	static struct BUF_CTRL __iomem *buf_ctrl;
 	__u32 channel, param, fw_ver;
 	__u8 cmd;
 	int special_count;
 	int delta_count;
 
-	firm_id = cinfo->base_addr + ID_ADDRESS;
-	zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-	board_ctrl = &zfw_ctrl->board_ctrl;
 	fw_ver = readl(&board_ctrl->fw_version);
 
 	while (cyz_fetch_msg(cinfo, &channel, &cmd, &param) == 1) {
 		special_count = 0;
 		delta_count = 0;
 		info = &cinfo->ports[channel];
-		tty = info->port.tty;
+		tty = tty_port_tty_get(&info->port);
 		if (tty == NULL)
 			continue;
 
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
 		switch (cmd) {
 		case C_CM_PR_ERROR:
 			tty_insert_flip_char(tty, 0, TTY_PARITY);
@@ -1669,15 +1143,12 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			info->icount.dcd++;
 			delta_count++;
 			if (info->port.flags & ASYNC_CHECK_CD) {
-				if ((fw_ver > 241 ? ((u_long) param) :
-						readl(&ch_ctrl->rs_status)) &
-						C_RS_DCD) {
+				u32 dcd = fw_ver > 241 ? param :
+					readl(&info->u.cyz.ch_ctrl->rs_status);
+				if (dcd & C_RS_DCD)
 					wake_up_interruptible(&info->port.open_wait);
-				} else {
-					tty_hangup(info->port.tty);
-					wake_up_interruptible(&info->port.open_wait);
-					info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-				}
+				else
+					tty_hangup(tty);
 			}
 			break;
 		case C_CM_MCTS:
@@ -1706,7 +1177,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_rx(info, buf_ctrl);
+			cyz_handle_rx(info, tty);
 			break;
 		case C_CM_TXBEMPTY:
 		case C_CM_TXLOWWM:
@@ -1716,7 +1187,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
 					"port %ld\n", info->card, channel);
 #endif
-			cyz_handle_tx(info, buf_ctrl);
+			cyz_handle_tx(info, tty);
 			break;
 #endif				/* CONFIG_CYZ_INTR */
 		case C_CM_FATAL:
@@ -1726,9 +1197,10 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
 			break;
 		}
 		if (delta_count)
-			wake_up_interruptible(&info->delta_msr_wait);
+			wake_up_interruptible(&info->port.delta_msr_wait);
 		if (special_count)
 			tty_schedule_flip(tty);
+		tty_kref_put(tty);
 	}
 }
 
@@ -1774,10 +1246,6 @@ static void cyz_poll(unsigned long arg)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info;
-	struct tty_struct *tty;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BUF_CTRL __iomem *buf_ctrl;
 	unsigned long expires = jiffies + HZ;
 	unsigned int port, card;
 
@@ -1789,10 +1257,6 @@ static void cyz_poll(unsigned long arg)
 		if (!cyz_is_loaded(cinfo))
 			continue;
 
-		firm_id = cinfo->base_addr + ID_ADDRESS;
-		zfw_ctrl = cinfo->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-
 	/* Skip first polling cycle to avoid racing conditions with the FW */
 		if (!cinfo->intr_enabled) {
 			cinfo->intr_enabled = 1;
@@ -1802,13 +1266,17 @@ static void cyz_poll(unsigned long arg)
 		cyz_handle_cmd(cinfo);
 
 		for (port = 0; port < cinfo->nports; port++) {
+			struct tty_struct *tty;
+
 			info = &cinfo->ports[port];
-			tty = info->port.tty;
-			buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
+			tty = tty_port_tty_get(&info->port);
+			/* OK to pass NULL to the handle functions below.
+			   They need to drop the data in that case. */
 
 			if (!info->throttle)
-				cyz_handle_rx(info, buf_ctrl);
-			cyz_handle_tx(info, buf_ctrl);
+				cyz_handle_rx(info, tty);
+			cyz_handle_tx(info, tty);
+			tty_kref_put(tty);
 		}
 		/* poll every 'cyz_polling_cycle' period */
 		expires = jiffies + cyz_polling_cycle;
@@ -1824,13 +1292,12 @@ static void cyz_poll(unsigned long arg)
 /* This is called whenever a port becomes active;
    interrupts are enabled and DTR & RTS are turned on.
  */
-static int startup(struct cyclades_port *info)
+static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
 	int retval = 0;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long page;
 
 	card = info->card;
@@ -1842,15 +1309,11 @@ static int startup(struct cyclades_port *info)
 
 	spin_lock_irqsave(&card->card_lock, flags);
 
-	if (info->port.flags & ASYNC_INITIALIZED) {
-		free_page(page);
+	if (info->port.flags & ASYNC_INITIALIZED)
 		goto errout;
-	}
 
 	if (!info->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		free_page(page);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		goto errout;
 	}
 
@@ -1861,96 +1324,53 @@ static int startup(struct cyclades_port *info)
 
 	spin_unlock_irqrestore(&card->card_lock, flags);
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
 		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
-#ifdef CY_DEBUG_OPEN
-		printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, "
-				"base_addr %p\n",
-				card, chip, channel, base_addr);
-#endif
 		spin_lock_irqsave(&card->card_lock, flags);
 
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cyy_writeb(info, CyCAR, channel);
 
-		cy_writeb(base_addr + (CyRTPR << index),
+		cyy_writeb(info, CyRTPR,
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
-				index);
-
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
-		cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
-
-#ifdef CY_DEBUG_DTR
-		printk(KERN_DEBUG "cyc:startup raising DTR\n");
-		printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-			readb(base_addr + (CyMSVR1 << index)),
-			readb(base_addr + (CyMSVR2 << index)));
-#endif
-
-		cy_writeb(base_addr + (CySRER << index),
-			readb(base_addr + (CySRER << index)) | CyRxData);
-		info->port.flags |= ASYNC_INITIALIZED;
-
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-		info->breakon = info->breakoff = 0;
-		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
-		info->idle_stats.in_use =
-		info->idle_stats.recv_idle =
-		info->idle_stats.xmit_idle = jiffies;
+		cyy_issue_cmd(info, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR);
 
-		spin_unlock_irqrestore(&card->card_lock, flags);
+		cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
 
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyRxData);
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 
-		base_addr = card->base_addr;
-
-		firm_id = base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return -ENODEV;
 
-		zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
-			"base_addr %p\n", card, channel, base_addr);
+			"base_addr %p\n", card, channel, card->base_addr);
 #endif
 		spin_lock_irqsave(&card->card_lock, flags);
 
-		cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE);
+		cy_writel(&ch_ctrl->op_mode, C_CH_ENABLE);
 #ifdef Z_WAKE
 #ifdef CONFIG_CYZ_INTR
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
 			  C_IN_RXNNDT | C_IN_IOCTLW | C_IN_MDCD);
 #else
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_IOCTLW | C_IN_MDCD);
 #endif				/* CONFIG_CYZ_INTR */
 #else
 #ifdef CONFIG_CYZ_INTR
-		cy_writel(&ch_ctrl[channel].intr_enable,
+		cy_writel(&ch_ctrl->intr_enable,
 			  C_IN_TXBEMPTY | C_IN_TXLOWWM | C_IN_RXHIWM |
 			  C_IN_RXNNDT | C_IN_MDCD);
 #else
-		cy_writel(&ch_ctrl[channel].intr_enable, C_IN_MDCD);
+		cy_writel(&ch_ctrl->intr_enable, C_IN_MDCD);
 #endif				/* CONFIG_CYZ_INTR */
 #endif				/* Z_WAKE */
 
@@ -1969,32 +1389,22 @@ static int startup(struct cyclades_port *info)
 
 		/* set timeout !!! */
 		/* set RTS and DTR !!! */
-		cy_writel(&ch_ctrl[channel].rs_control,
-			readl(&ch_ctrl[channel].rs_control) | C_RS_RTS |
-			C_RS_DTR);
-		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
-		if (retval != 0) {
-			printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
-				"%x\n", info->line, retval);
-		}
-#ifdef CY_DEBUG_DTR
-		printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
-#endif
+		tty_port_raise_dtr_rts(&info->port);
 
 		/* enable send, recv, modem !!! */
+	}
 
-		info->port.flags |= ASYNC_INITIALIZED;
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-		info->breakon = info->breakoff = 0;
-		memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
-		info->idle_stats.in_use =
-		info->idle_stats.recv_idle =
-		info->idle_stats.xmit_idle = jiffies;
+	info->port.flags |= ASYNC_INITIALIZED;
 
-		spin_unlock_irqrestore(&card->card_lock, flags);
-	}
+	clear_bit(TTY_IO_ERROR, &tty->flags);
+	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+	info->breakon = info->breakoff = 0;
+	memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
+	info->idle_stats.in_use =
+	info->idle_stats.recv_idle =
+	info->idle_stats.xmit_idle = jiffies;
+
+	spin_unlock_irqrestore(&card->card_lock, flags);
 
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc startup done\n");
@@ -2003,28 +1413,20 @@ static int startup(struct cyclades_port *info)
 
 errout:
 	spin_unlock_irqrestore(&card->card_lock, flags);
+	free_page(page);
 	return retval;
 }				/* startup */
 
 static void start_xmit(struct cyclades_port *info)
 {
-	struct cyclades_card *card;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel = info->line - card->first_line;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), channel);
-		cy_writeb(base_addr + (CySRER << index),
-			readb(base_addr + (CySRER << index)) | CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
 #ifdef CONFIG_CYZ_INTR
@@ -2047,12 +1449,11 @@ static void start_xmit(struct cyclades_port *info)
  * This routine shuts down a serial port; interrupts are disabled,
  * and DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct cyclades_port *info)
+static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 
 	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
@@ -2060,21 +1461,10 @@ static void shutdown(struct cyclades_port *info)
 	card = info->card;
 	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-#ifdef CY_DEBUG_OPEN
-		printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, "
-				"channel %d, base_addr %p\n",
-				card, chip, channel, base_addr);
-#endif
-
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		/* Clear delta_msr_wait queue to avoid mem leaks. */
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&info->port.delta_msr_wait);
 
 		if (info->port.xmit_buf) {
 			unsigned char *temp;
@@ -2082,47 +1472,25 @@ static void shutdown(struct cyclades_port *info)
 			info->port.xmit_buf = NULL;
 			free_page((unsigned long)temp);
 		}
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
-			cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
-			cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		}
-		cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
+		if (tty->termios->c_cflag & HUPCL)
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
+
+		cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
 		/* it may be appropriate to clear _XMIT at
 		   some later date (after testing)!!! */
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
-		int retval;
-
-		base_addr = card->base_addr;
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
-			"base_addr %p\n", card, channel, base_addr);
+			"base_addr %p\n", card, channel, card->base_addr);
 #endif
 
-		firm_id = base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return;
 
-		zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
 		spin_lock_irqsave(&card->card_lock, flags);
 
 		if (info->port.xmit_buf) {
@@ -2132,23 +1500,10 @@ static void shutdown(struct cyclades_port *info)
 			free_page((unsigned long)temp);
 		}
 
-		if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
-			cy_writel(&ch_ctrl[channel].rs_control,
-				(__u32)(readl(&ch_ctrl[channel].rs_control) &
-					~(C_RS_RTS | C_RS_DTR)));
-			retval = cyz_issue_cmd(info->card, channel,
-					C_CM_IOCTLM, 0L);
-			if (retval != 0) {
-				printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
-					"was %x\n", info->line, retval);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
-#endif
-		}
+		if (tty->termios->c_cflag & HUPCL)
+			tty_port_lower_dtr_rts(&info->port);
 
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		set_bit(TTY_IO_ERROR, &tty->flags);
 		info->port.flags &= ~ASYNC_INITIALIZED;
 
 		spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2165,199 +1520,6 @@ static void shutdown(struct cyclades_port *info)
  * ------------------------------------------------------------
  */
 
-static int
-block_til_ready(struct tty_struct *tty, struct file *filp,
-		struct cyclades_port *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	struct cyclades_card *cinfo;
-	unsigned long flags;
-	int chip, channel, index;
-	int retval;
-	void __iomem *base_addr;
-
-	cinfo = info->card;
-	channel = info->line - cinfo->first_line;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
-		wait_event_interruptible(info->port.close_wait,
-				!(info->port.flags & ASYNC_CLOSING));
-		return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
-	}
-
-	/*
-	 * If non-blocking mode is set, then make the check up front
-	 * and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-					(tty->flags & (1 << TTY_IO_ERROR))) {
-		info->port.flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->port.count is dropped by one, so that
-	 * cy_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->port.open_wait, &wait);
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
-		"count = %d\n", info->line, info->port.count);
-#endif
-	spin_lock_irqsave(&cinfo->card_lock, flags);
-	if (!tty_hung_up_p(filp))
-		info->port.count--;
-	spin_unlock_irqrestore(&cinfo->card_lock, flags);
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
-		"%d\n", current->pid, info->port.count);
-#endif
-	info->port.blocked_open++;
-
-	if (!cy_is_Z(cinfo)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = cinfo->bus_index;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
-		while (1) {
-			spin_lock_irqsave(&cinfo->card_lock, flags);
-			if ((tty->termios->c_cflag & CBAUD)) {
-				cy_writeb(base_addr + (CyCAR << index),
-					  (u_char) channel);
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:block_til_ready raising "
-					"DTR\n");
-				printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-					readb(base_addr + (CyMSVR1 << index)),
-					readb(base_addr + (CyMSVR2 << index)));
-#endif
-			}
-			spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (tty_hung_up_p(filp) ||
-					!(info->port.flags & ASYNC_INITIALIZED)) {
-				retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-					  -EAGAIN : -ERESTARTSYS);
-				break;
-			}
-
-			spin_lock_irqsave(&cinfo->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
-					(readb(base_addr +
-						(CyMSVR1 << index)) & CyDCD))) {
-				spin_unlock_irqrestore(&cinfo->card_lock, flags);
-				break;
-			}
-			spin_unlock_irqrestore(&cinfo->card_lock, flags);
-
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
-#ifdef CY_DEBUG_OPEN
-			printk(KERN_DEBUG "cyc block_til_ready blocking: "
-				"ttyC%d, count = %d\n",
-				info->line, info->port.count);
-#endif
-			schedule();
-		}
-	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct BOARD_CTRL __iomem *board_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
-
-		base_addr = cinfo->base_addr;
-		firm_id = base_addr + ID_ADDRESS;
-		if (!cyz_is_loaded(cinfo)) {
-			__set_current_state(TASK_RUNNING);
-			remove_wait_queue(&info->port.open_wait, &wait);
-			return -EINVAL;
-		}
-
-		zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)
-								& 0xfffff);
-		board_ctrl = &zfw_ctrl->board_ctrl;
-		ch_ctrl = zfw_ctrl->ch_ctrl;
-
-		while (1) {
-			if ((tty->termios->c_cflag & CBAUD)) {
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_RTS | C_RS_DTR);
-				retval = cyz_issue_cmd(cinfo,
-					channel, C_CM_IOCTLM, 0L);
-				if (retval != 0) {
-					printk(KERN_ERR "cyc:block_til_ready "
-						"retval on ttyC%d was %x\n",
-						info->line, retval);
-				}
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:block_til_ready raising "
-					"Z DTR\n");
-#endif
-			}
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (tty_hung_up_p(filp) ||
-					!(info->port.flags & ASYNC_INITIALIZED)) {
-				retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
-					  -EAGAIN : -ERESTARTSYS);
-				break;
-			}
-			if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
-					(readl(&ch_ctrl[channel].rs_status) &
-						C_RS_DCD))) {
-				break;
-			}
-			if (signal_pending(current)) {
-				retval = -ERESTARTSYS;
-				break;
-			}
-#ifdef CY_DEBUG_OPEN
-			printk(KERN_DEBUG "cyc block_til_ready blocking: "
-				"ttyC%d, count = %d\n",
-				info->line, info->port.count);
-#endif
-			schedule();
-		}
-	}
-	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->port.open_wait, &wait);
-	if (!tty_hung_up_p(filp)) {
-		info->port.count++;
-#ifdef CY_DEBUG_COUNT
-		printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
-			"count to %d\n", current->pid, info->port.count);
-#endif
-	}
-	info->port.blocked_open--;
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
-		"count = %d\n", info->line, info->port.count);
-#endif
-	if (retval)
-		return retval;
-	info->port.flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}				/* block_til_ready */
-
 /*
  * This routine is called whenever a serial port is opened.  It
  * performs the serial-specific initialization for the tty structure.
@@ -2436,7 +1598,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
 #endif
 	tty->driver_data = info;
-	info->port.tty = tty;
 	if (serial_paranoia_check(info, tty->name, "cy_open"))
 		return -ENODEV;
 
@@ -2462,11 +1623,11 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Start up serial port
 	 */
-	retval = startup(info);
+	retval = cy_startup(info, tty);
 	if (retval)
 		return retval;
 
-	retval = block_til_ready(tty, filp, info);
+	retval = tty_port_block_til_ready(&info->port, tty, filp);
 	if (retval) {
 #ifdef CY_DEBUG_OPEN
 		printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
@@ -2476,6 +1637,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	}
 
 	info->throttle = 0;
+	tty_port_tty_set(&info->port, tty);
 
 #ifdef CY_DEBUG_OPEN
 	printk(KERN_DEBUG "cyc:cy_open done\n");
@@ -2490,8 +1652,6 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 {
 	struct cyclades_card *card;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
 	unsigned long orig_jiffies;
 	int char_time;
 
@@ -2535,13 +1695,8 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
 		timeout, char_time, jiffies);
 #endif
 	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-		while (readb(base_addr + (CySRER << index)) & CyTxRdy) {
+		while (cyy_readb(info, CySRER) & CyTxRdy) {
 #ifdef CY_DEBUG_WAIT_UNTIL_SENT
 			printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
 #endif
@@ -2595,103 +1750,37 @@ static void cy_flush_buffer(struct tty_struct *tty)
 }				/* cy_flush_buffer */
 
 
-/*
- * This routine is called when a particular tty device is closed.
- */
-static void cy_close(struct tty_struct *tty, struct file *filp)
+static void cy_do_close(struct tty_port *port)
 {
-	struct cyclades_port *info = tty->driver_data;
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+								port);
 	struct cyclades_card *card;
 	unsigned long flags;
-
-#ifdef CY_DEBUG_OTHER
-	printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
-#endif
-
-	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
-		return;
+	int channel;
 
 	card = info->card;
-
-	spin_lock_irqsave(&card->card_lock, flags);
-	/* If the TTY is being hung up, nothing to do */
-	if (tty_hung_up_p(filp)) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		return;
-	}
-#ifdef CY_DEBUG_OPEN
-	printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
-		info->port.count);
-#endif
-	if ((tty->count == 1) && (info->port.count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk(KERN_ERR "cyc:cy_close: bad serial port count; "
-			"tty->count is 1, info->port.count is %d\n", info->port.count);
-		info->port.count = 1;
-	}
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG  "cyc:cy_close at (%d): decrementing count to %d\n",
-		current->pid, info->port.count - 1);
-#endif
-	if (--info->port.count < 0) {
-#ifdef CY_DEBUG_COUNT
-		printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
-#endif
-		info->port.count = 0;
-	}
-	if (info->port.count) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		return;
-	}
-	info->port.flags |= ASYNC_CLOSING;
-
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	spin_unlock_irqrestore(&card->card_lock, flags);
-	if (info->port.closing_wait != CY_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->port.closing_wait);
-
+	channel = info->line - card->first_line;
 	spin_lock_irqsave(&card->card_lock, flags);
 
 	if (!cy_is_Z(card)) {
-		int channel = info->line - card->first_line;
-		int index = card->bus_index;
-		void __iomem *base_addr = card->base_addr +
-			(cy_chip_offset[channel >> 2] << index);
 		/* Stop accepting input */
-		channel &= 0x03;
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyRxData);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyRxData);
 		if (info->port.flags & ASYNC_INITIALIZED) {
 			/* Waiting for on-board buffers to be empty before
 			   closing the port */
 			spin_unlock_irqrestore(&card->card_lock, flags);
-			cy_wait_until_sent(tty, info->timeout);
+			cy_wait_until_sent(port->tty, info->timeout);
 			spin_lock_irqsave(&card->card_lock, flags);
 		}
 	} else {
 #ifdef Z_WAKE
 		/* Waiting for on-board buffers to be empty before closing
 		   the port */
-		void __iomem *base_addr = card->base_addr;
-		struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS;
-		struct ZFW_CTRL __iomem *zfw_ctrl =
-		    base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl;
-		int channel = info->line - card->first_line;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		int retval;
 
-		if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) {
+		if (readl(&ch_ctrl->flow_status) != C_FS_TXIDLE) {
 			retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L);
 			if (retval != 0) {
 				printk(KERN_DEBUG "cyc:cy_close retval on "
@@ -2703,32 +1792,19 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
 		}
 #endif
 	}
-
 	spin_unlock_irqrestore(&card->card_lock, flags);
-	shutdown(info);
-	cy_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	spin_lock_irqsave(&card->card_lock, flags);
-
-	tty->closing = 0;
-	info->port.tty = NULL;
-	if (info->port.blocked_open) {
-		spin_unlock_irqrestore(&card->card_lock, flags);
-		if (info->port.close_delay) {
-			msleep_interruptible(jiffies_to_msecs
-						(info->port.close_delay));
-		}
-		wake_up_interruptible(&info->port.open_wait);
-		spin_lock_irqsave(&card->card_lock, flags);
-	}
-	info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-	wake_up_interruptible(&info->port.close_wait);
-
-#ifdef CY_DEBUG_OTHER
-	printk(KERN_DEBUG "cyc:cy_close done\n");
-#endif
+	cy_shutdown(info, port->tty);
+}
 
-	spin_unlock_irqrestore(&card->card_lock, flags);
+/*
+ * This routine is called when a particular tty device is closed.
+ */
+static void cy_close(struct tty_struct *tty, struct file *filp)
+{
+	struct cyclades_port *info = tty->driver_data;
+	if (!info || serial_paranoia_check(info, tty->name, "cy_close"))
+		return;
+	tty_port_close(&info->port, tty, filp);
 }				/* cy_close */
 
 /* This routine gets called when tty_write has put something into
@@ -2871,18 +1947,13 @@ static int cy_write_room(struct tty_struct *tty)
 
 static int cy_chars_in_buffer(struct tty_struct *tty)
 {
-	struct cyclades_card *card;
 	struct cyclades_port *info = tty->driver_data;
-	int channel;
 
 	if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
 		return 0;
 
-	card = info->card;
-	channel = (info->line) - (card->first_line);
-
 #ifdef Z_EXT_CHARS_IN_BUFFER
-	if (!cy_is_Z(card)) {
+	if (!cy_is_Z(info->card)) {
 #endif				/* Z_EXT_CHARS_IN_BUFFER */
 #ifdef CY_DEBUG_IO
 		printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
@@ -2891,20 +1962,11 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
 		return info->xmit_cnt;
 #ifdef Z_EXT_CHARS_IN_BUFFER
 	} else {
-		static struct FIRM_ID *firm_id;
-		static struct ZFW_CTRL *zfw_ctrl;
-		static struct CH_CTRL *ch_ctrl;
-		static struct BUF_CTRL *buf_ctrl;
+		struct BUF_CTRL __iomem *buf_ctrl = info->u.cyz.buf_ctrl;
 		int char_count;
 		__u32 tx_put, tx_get, tx_bufsize;
 
 		lock_kernel();
-		firm_id = card->base_addr + ID_ADDRESS;
-		zfw_ctrl = card->base_addr +
-			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-		buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]);
-
 		tx_get = readl(&buf_ctrl->tx_get);
 		tx_put = readl(&buf_ctrl->tx_put);
 		tx_bufsize = readl(&buf_ctrl->tx_bufsize);
@@ -2957,48 +2019,44 @@ static void cyy_baud_calc(struct cyclades_port *info, __u32 baud)
  * This routine finds or computes the various line characteristics.
  * It used to be called config_setup
  */
-static void set_line_char(struct cyclades_port *info)
+static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
 {
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned cflag, iflag;
 	int baud, baud_rate = 0;
 	int i;
 
-	if (!info->port.tty || !info->port.tty->termios)
+	if (!tty->termios) /* XXX can this happen at all? */
 		return;
 
 	if (info->line == -1)
 		return;
 
-	cflag = info->port.tty->termios->c_cflag;
-	iflag = info->port.tty->termios->c_iflag;
+	cflag = tty->termios->c_cflag;
+	iflag = tty->termios->c_iflag;
 
 	/*
 	 * Set up the tty->alt_speed kludge
 	 */
-	if (info->port.tty) {
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->port.tty->alt_speed = 57600;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->port.tty->alt_speed = 115200;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->port.tty->alt_speed = 230400;
-		if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->port.tty->alt_speed = 460800;
-	}
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+		tty->alt_speed = 57600;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+		tty->alt_speed = 115200;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+		tty->alt_speed = 230400;
+	if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+		tty->alt_speed = 460800;
 
 	card = info->card;
 	channel = info->line - card->first_line;
 
 	if (!cy_is_Z(card)) {
-
-		index = card->bus_index;
+		u32 cflags;
 
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3107,124 +2165,68 @@ static void set_line_char(struct cyclades_port *info)
 	    cable.  Contact Marcio Saito for details.
 	 ***********************************************/
 
-		chip = channel >> 2;
 		channel &= 0x03;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+		cyy_writeb(info, CyCAR, channel);
 
 		/* tx and rx baud rate */
 
-		cy_writeb(base_addr + (CyTCOR << index), info->tco);
-		cy_writeb(base_addr + (CyTBPR << index), info->tbpr);
-		cy_writeb(base_addr + (CyRCOR << index), info->rco);
-		cy_writeb(base_addr + (CyRBPR << index), info->rbpr);
+		cyy_writeb(info, CyTCOR, info->tco);
+		cyy_writeb(info, CyTBPR, info->tbpr);
+		cyy_writeb(info, CyRCOR, info->rco);
+		cyy_writeb(info, CyRBPR, info->rbpr);
 
 		/* set line characteristics  according configuration */
 
-		cy_writeb(base_addr + (CySCHR1 << index),
-			  START_CHAR(info->port.tty));
-		cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
-		cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
-		cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
-		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
-		cy_writeb(base_addr + (CyCOR4 << index), info->cor4);
-		cy_writeb(base_addr + (CyCOR5 << index), info->cor5);
+		cyy_writeb(info, CySCHR1, START_CHAR(tty));
+		cyy_writeb(info, CySCHR2, STOP_CHAR(tty));
+		cyy_writeb(info, CyCOR1, info->cor1);
+		cyy_writeb(info, CyCOR2, info->cor2);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_writeb(info, CyCOR4, info->cor4);
+		cyy_writeb(info, CyCOR5, info->cor5);
 
-		cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
-				CyCOR3ch, index);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR1ch | CyCOR2ch |
+				CyCOR3ch);
 
 		/* !!! Is this needed? */
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		cy_writeb(base_addr + (CyRTPR << index),
+		cyy_writeb(info, CyCAR, channel);
+		cyy_writeb(info, CyRTPR,
 			(info->default_timeout ? info->default_timeout : 0x02));
 		/* 10ms rx timeout */
 
-		if (C_CLOCAL(info->port.tty)) {
-			/* without modem intr */
-			cy_writeb(base_addr + (CySRER << index),
-				readb(base_addr + (CySRER << index)) | CyMdmCh);
-			/* act on 1->0 modem transitions */
-			if ((cflag & CRTSCTS) && info->rflow) {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  (CyCTS | rflow_thr[i]));
-			} else {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  CyCTS);
-			}
-			/* act on 0->1 modem transitions */
-			cy_writeb(base_addr + (CyMCOR2 << index), CyCTS);
-		} else {
-			/* without modem intr */
-			cy_writeb(base_addr + (CySRER << index),
-				  readb(base_addr +
-					   (CySRER << index)) | CyMdmCh);
-			/* act on 1->0 modem transitions */
-			if ((cflag & CRTSCTS) && info->rflow) {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  (CyDSR | CyCTS | CyRI | CyDCD |
-					   rflow_thr[i]));
-			} else {
-				cy_writeb(base_addr + (CyMCOR1 << index),
-					  CyDSR | CyCTS | CyRI | CyDCD);
-			}
-			/* act on 0->1 modem transitions */
-			cy_writeb(base_addr + (CyMCOR2 << index),
-				  CyDSR | CyCTS | CyRI | CyDCD);
-		}
+		cflags = CyCTS;
+		if (!C_CLOCAL(tty))
+			cflags |= CyDSR | CyRI | CyDCD;
+		/* without modem intr */
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyMdmCh);
+		/* act on 1->0 modem transitions */
+		if ((cflag & CRTSCTS) && info->rflow)
+			cyy_writeb(info, CyMCOR1, cflags | rflow_thr[i]);
+		else
+			cyy_writeb(info, CyMCOR1, cflags);
+		/* act on 0->1 modem transitions */
+		cyy_writeb(info, CyMCOR2, cflags);
 
-		if (i == 0) {	/* baud rate is zero, turn off line */
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		} else {
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			}
-#ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
-#endif
-		}
+		if (i == 0)	/* baud rate is zero, turn off line */
+			cyy_change_rts_dtr(info, 0, TIOCM_DTR);
+		else
+			cyy_change_rts_dtr(info, TIOCM_DTR, 0);
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 	} else {
-		struct FIRM_ID __iomem *firm_id;
-		struct ZFW_CTRL __iomem *zfw_ctrl;
-		struct CH_CTRL __iomem *ch_ctrl;
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
 		__u32 sw_flow;
 		int retval;
 
-		firm_id = card->base_addr + ID_ADDRESS;
 		if (!cyz_is_loaded(card))
 			return;
 
-		zfw_ctrl = card->base_addr +
-			(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-		ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]);
-
 		/* baud rate */
-		baud = tty_get_baud_rate(info->port.tty);
+		baud = tty_get_baud_rate(tty);
 		if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
 				ASYNC_SPD_CUST) {
 			if (info->custom_divisor)
@@ -3335,45 +2337,38 @@ static void set_line_char(struct cyclades_port *info)
 				"was %x\n", info->line, retval);
 		}
 
-		if (info->port.tty)
-			clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	}
 }				/* set_line_char */
 
-static int
-get_serial_info(struct cyclades_port *info,
+static int cy_get_serial_info(struct cyclades_port *info,
 		struct serial_struct __user *retinfo)
 {
-	struct serial_struct tmp;
 	struct cyclades_card *cinfo = info->card;
-
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = (info->card - cy_card) * 0x100 + info->line -
-		cinfo->first_line;
-	tmp.irq = cinfo->irq;
-	tmp.flags = info->port.flags;
-	tmp.close_delay = info->port.close_delay;
-	tmp.closing_wait = info->port.closing_wait;
-	tmp.baud_base = info->baud;
-	tmp.custom_divisor = info->custom_divisor;
-	tmp.hub6 = 0;		/*!!! */
+	struct serial_struct tmp = {
+		.type = info->type,
+		.line = info->line,
+		.port = (info->card - cy_card) * 0x100 + info->line -
+			cinfo->first_line,
+		.irq = cinfo->irq,
+		.flags = info->port.flags,
+		.close_delay = info->port.close_delay,
+		.closing_wait = info->port.closing_wait,
+		.baud_base = info->baud,
+		.custom_divisor = info->custom_divisor,
+		.hub6 = 0,		/*!!! */
+	};
 	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
-}				/* get_serial_info */
+}
 
 static int
-set_serial_info(struct cyclades_port *info,
+cy_set_serial_info(struct cyclades_port *info, struct tty_struct *tty,
 		struct serial_struct __user *new_info)
 {
 	struct serial_struct new_serial;
-	struct cyclades_port old_info;
 
 	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
 		return -EFAULT;
-	old_info = *info;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (new_serial.close_delay != info->port.close_delay ||
@@ -3403,10 +2398,10 @@ set_serial_info(struct cyclades_port *info,
 
 check_and_exit:
 	if (info->port.flags & ASYNC_INITIALIZED) {
-		set_line_char(info);
+		cy_set_line_char(info, tty);
 		return 0;
 	} else {
-		return startup(info);
+		return cy_startup(info, tty);
 	}
 }				/* set_serial_info */
 
@@ -3422,24 +2417,14 @@ check_and_exit:
  */
 static int get_lsr_info(struct cyclades_port *info, unsigned int __user *value)
 {
-	struct cyclades_card *card;
-	int chip, channel, index;
-	unsigned char status;
+	struct cyclades_card *card = info->card;
 	unsigned int result;
 	unsigned long flags;
-	void __iomem *base_addr;
+	u8 status;
 
-	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		status = readb(base_addr + (CySRER << index)) &
-				(CyTxRdy | CyTxMpty);
+		status = cyy_readb(info, CySRER) & (CyTxRdy | CyTxMpty);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 		result = (status ? 0 : TIOCSER_TEMT);
 	} else {
@@ -3453,34 +2438,23 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	int chip, channel, index;
-	void __iomem *base_addr;
-	unsigned long flags;
-	unsigned char status;
-	unsigned long lstatus;
-	unsigned int result;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
+	int result;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
-	lock_kernel();
-
 	card = info->card;
-	channel = info->line - card->first_line;
+
+	lock_kernel();
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+		unsigned long flags;
+		int channel = info->line - card->first_line;
+		u8 status;
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-		status = readb(base_addr + (CyMSVR1 << index));
-		status |= readb(base_addr + (CyMSVR2 << index));
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		status = cyy_readb(info, CyMSVR1);
+		status |= cyy_readb(info, CyMSVR2);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 
 		if (info->rtsdtr_inv) {
@@ -3495,27 +2469,22 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file)
 			((status & CyDSR) ? TIOCM_DSR : 0) |
 			((status & CyCTS) ? TIOCM_CTS : 0);
 	} else {
-		base_addr = card->base_addr;
-		firm_id = card->base_addr + ID_ADDRESS;
-		if (cyz_is_loaded(card)) {
-			zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-			board_ctrl = &zfw_ctrl->board_ctrl;
-			ch_ctrl = zfw_ctrl->ch_ctrl;
-			lstatus = readl(&ch_ctrl[channel].rs_status);
-			result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
-				((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
-				((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
-				((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
-				((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
-				((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
-		} else {
-			result = 0;
-			unlock_kernel();
-			return -ENODEV;
+		u32 lstatus;
+
+		if (!cyz_is_loaded(card)) {
+			result = -ENODEV;
+			goto end;
 		}
 
+		lstatus = readl(&info->u.cyz.ch_ctrl->rs_status);
+		result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) |
+			((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) |
+			((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) |
+			((lstatus & C_RS_RI) ? TIOCM_RNG : 0) |
+			((lstatus & C_RS_DSR) ? TIOCM_DSR : 0) |
+			((lstatus & C_RS_CTS) ? TIOCM_CTS : 0);
 	}
+end:
 	unlock_kernel();
 	return result;
 }				/* cy_tiomget */
@@ -3526,150 +2495,53 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
 {
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
-	int chip, channel, index;
-	void __iomem *base_addr;
 	unsigned long flags;
-	struct FIRM_ID __iomem *firm_id;
-	struct ZFW_CTRL __iomem *zfw_ctrl;
-	struct BOARD_CTRL __iomem *board_ctrl;
-	struct CH_CTRL __iomem *ch_ctrl;
-	int retval;
 
 	if (serial_paranoia_check(info, tty->name, __func__))
 		return -ENODEV;
 
 	card = info->card;
-	channel = (info->line) - (card->first_line);
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+		spin_lock_irqsave(&card->card_lock, flags);
+		cyy_change_rts_dtr(info, set, clear);
+		spin_unlock_irqrestore(&card->card_lock, flags);
+	} else {
+		struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+		int retval, channel = info->line - card->first_line;
+		u32 rs;
 
-		if (set & TIOCM_RTS) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			}
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
-		if (clear & TIOCM_RTS) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			}
-			spin_unlock_irqrestore(&card->card_lock, flags);
-		}
+		if (!cyz_is_loaded(card))
+			return -ENODEV;
+
+		spin_lock_irqsave(&card->card_lock, flags);
+		rs = readl(&ch_ctrl->rs_control);
+		if (set & TIOCM_RTS)
+			rs |= C_RS_RTS;
+		if (clear & TIOCM_RTS)
+			rs &= ~C_RS_RTS;
 		if (set & TIOCM_DTR) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			}
+			rs |= C_RS_DTR;
 #ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
+			printk(KERN_DEBUG "cyc:set_modem_info raising Z DTR\n");
 #endif
-			spin_unlock_irqrestore(&card->card_lock, flags);
 		}
 		if (clear & TIOCM_DTR) {
-			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			} else {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			}
-
+			rs &= ~C_RS_DTR;
 #ifdef CY_DEBUG_DTR
-			printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
-			printk(KERN_DEBUG "     status: 0x%x, 0x%x\n",
-				readb(base_addr + (CyMSVR1 << index)),
-				readb(base_addr + (CyMSVR2 << index)));
+			printk(KERN_DEBUG "cyc:set_modem_info clearing "
+				"Z DTR\n");
 #endif
-			spin_unlock_irqrestore(&card->card_lock, flags);
 		}
-	} else {
-		base_addr = card->base_addr;
-
-		firm_id = card->base_addr + ID_ADDRESS;
-		if (cyz_is_loaded(card)) {
-			zfw_ctrl = card->base_addr +
-				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
-			board_ctrl = &zfw_ctrl->board_ctrl;
-			ch_ctrl = zfw_ctrl->ch_ctrl;
-
-			if (set & TIOCM_RTS) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_RTS);
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (clear & TIOCM_RTS) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) &
-					~C_RS_RTS);
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (set & TIOCM_DTR) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) |
-					C_RS_DTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:set_modem_info raising "
-					"Z DTR\n");
-#endif
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-			if (clear & TIOCM_DTR) {
-				spin_lock_irqsave(&card->card_lock, flags);
-				cy_writel(&ch_ctrl[channel].rs_control,
-					readl(&ch_ctrl[channel].rs_control) &
-					~C_RS_DTR);
-#ifdef CY_DEBUG_DTR
-				printk(KERN_DEBUG "cyc:set_modem_info clearing "
-					"Z DTR\n");
-#endif
-				spin_unlock_irqrestore(&card->card_lock, flags);
-			}
-		} else {
-			return -ENODEV;
-		}
-		spin_lock_irqsave(&card->card_lock, flags);
+		cy_writel(&ch_ctrl->rs_control, rs);
 		retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
+		spin_unlock_irqrestore(&card->card_lock, flags);
 		if (retval != 0) {
 			printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
 				"was %x\n", info->line, retval);
 		}
-		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
-}				/* cy_tiocmset */
+}
 
 /*
  * cy_break() --- routine which turns the break handling on or off
@@ -3734,41 +2606,18 @@ static int cy_break(struct tty_struct *tty, int break_state)
 	return retval;
 }				/* cy_break */
 
-static int get_mon_info(struct cyclades_port *info,
-				struct cyclades_monitor __user *mon)
-{
-
-	if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
-		return -EFAULT;
-	info->mon.int_count = 0;
-	info->mon.char_count = 0;
-	info->mon.char_max = 0;
-	info->mon.char_last = 0;
-	return 0;
-}				/* get_mon_info */
-
 static int set_threshold(struct cyclades_port *info, unsigned long value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr =
-		    card->base_addr + (cy_chip_offset[chip] << index);
-
 		info->cor3 &= ~CyREC_FIFO;
 		info->cor3 |= value & CyREC_FIFO;
 
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
-		cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index);
+		cyy_writeb(info, CyCOR3, info->cor3);
+		cyy_issue_cmd(info, CyCOR_CHANGE | CyCOR3ch);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
@@ -3777,55 +2626,23 @@ static int set_threshold(struct cyclades_port *info, unsigned long value)
 static int get_threshold(struct cyclades_port *info,
 						unsigned long __user *value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
-	unsigned long tmp;
+	struct cyclades_card *card = info->card;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO;
+		u8 tmp = cyy_readb(info, CyCOR3) & CyREC_FIFO;
 		return put_user(tmp, value);
 	}
 	return 0;
 }				/* get_threshold */
 
-static int set_default_threshold(struct cyclades_port *info,
-							unsigned long value)
-{
-	info->default_threshold = value & 0x0f;
-	return 0;
-}				/* set_default_threshold */
-
-static int get_default_threshold(struct cyclades_port *info,
-						unsigned long __user *value)
-{
-	return put_user(info->default_threshold, value);
-}				/* get_default_threshold */
-
 static int set_timeout(struct cyclades_port *info, unsigned long value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
+	struct cyclades_card *card = info->card;
 	unsigned long flags;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&card->card_lock, flags);
-		cy_writeb(base_addr + (CyRTPR << index), value & 0xff);
+		cyy_writeb(info, CyRTPR, value & 0xff);
 		spin_unlock_irqrestore(&card->card_lock, flags);
 	}
 	return 0;
@@ -3834,36 +2651,35 @@ static int set_timeout(struct cyclades_port *info, unsigned long value)
 static int get_timeout(struct cyclades_port *info,
 						unsigned long __user *value)
 {
-	struct cyclades_card *card;
-	void __iomem *base_addr;
-	int channel, chip, index;
-	unsigned long tmp;
+	struct cyclades_card *card = info->card;
 
-	card = info->card;
-	channel = info->line - card->first_line;
 	if (!cy_is_Z(card)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		index = card->bus_index;
-		base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
-		tmp = readb(base_addr + (CyRTPR << index));
+		u8 tmp = cyy_readb(info, CyRTPR);
 		return put_user(tmp, value);
 	}
 	return 0;
 }				/* get_timeout */
 
-static int set_default_timeout(struct cyclades_port *info, unsigned long value)
+static int cy_cflags_changed(struct cyclades_port *info, unsigned long arg,
+		struct cyclades_icount *cprev)
 {
-	info->default_timeout = value & 0xff;
-	return 0;
-}				/* set_default_timeout */
+	struct cyclades_icount cnow;
+	unsigned long flags;
+	int ret;
 
-static int get_default_timeout(struct cyclades_port *info,
-					unsigned long __user *value)
-{
-	return put_user(info->default_timeout, value);
-}				/* get_default_timeout */
+	spin_lock_irqsave(&info->card->card_lock, flags);
+	cnow = info->icount;	/* atomic copy */
+	spin_unlock_irqrestore(&info->card->card_lock, flags);
+
+	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
+		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
+		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
+		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
+
+	*cprev = cnow;
+
+	return ret;
+}
 
 /*
  * This routine allows the tty driver to implement device-
@@ -3875,8 +2691,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 	 unsigned int cmd, unsigned long arg)
 {
 	struct cyclades_port *info = tty->driver_data;
-	struct cyclades_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct __user *p_cuser;	/* user space */
+	struct cyclades_icount cnow;	/* kernel counter temps */
 	int ret_val = 0;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
@@ -3892,7 +2707,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 
 	switch (cmd) {
 	case CYGETMON:
-		ret_val = get_mon_info(info, argp);
+		if (copy_to_user(argp, &info->mon, sizeof(info->mon))) {
+			ret_val = -EFAULT;
+			break;
+		}
+		memset(&info->mon, 0, sizeof(info->mon));
 		break;
 	case CYGETTHRESH:
 		ret_val = get_threshold(info, argp);
@@ -3901,10 +2720,11 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		ret_val = set_threshold(info, arg);
 		break;
 	case CYGETDEFTHRESH:
-		ret_val = get_default_threshold(info, argp);
+		ret_val = put_user(info->default_threshold,
+				(unsigned long __user *)argp);
 		break;
 	case CYSETDEFTHRESH:
-		ret_val = set_default_threshold(info, arg);
+		info->default_threshold = arg & 0x0f;
 		break;
 	case CYGETTIMEOUT:
 		ret_val = get_timeout(info, argp);
@@ -3913,21 +2733,20 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		ret_val = set_timeout(info, arg);
 		break;
 	case CYGETDEFTIMEOUT:
-		ret_val = get_default_timeout(info, argp);
+		ret_val = put_user(info->default_timeout,
+				(unsigned long __user *)argp);
 		break;
 	case CYSETDEFTIMEOUT:
-		ret_val = set_default_timeout(info, arg);
+		info->default_timeout = arg & 0xff;
 		break;
 	case CYSETRFLOW:
 		info->rflow = (int)arg;
-		ret_val = 0;
 		break;
 	case CYGETRFLOW:
 		ret_val = info->rflow;
 		break;
 	case CYSETRTSDTR_INV:
 		info->rtsdtr_inv = (int)arg;
-		ret_val = 0;
 		break;
 	case CYGETRTSDTR_INV:
 		ret_val = info->rtsdtr_inv;
@@ -3938,7 +2757,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 #ifndef CONFIG_CYZ_INTR
 	case CYZSETPOLLCYCLE:
 		cyz_polling_cycle = (arg * HZ) / 1000;
-		ret_val = 0;
 		break;
 	case CYZGETPOLLCYCLE:
 		ret_val = (cyz_polling_cycle * 1000) / HZ;
@@ -3946,16 +2764,15 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 #endif				/* CONFIG_CYZ_INTR */
 	case CYSETWAIT:
 		info->port.closing_wait = (unsigned short)arg * HZ / 100;
-		ret_val = 0;
 		break;
 	case CYGETWAIT:
 		ret_val = info->port.closing_wait / (HZ / 100);
 		break;
 	case TIOCGSERIAL:
-		ret_val = get_serial_info(info, argp);
+		ret_val = cy_get_serial_info(info, argp);
 		break;
 	case TIOCSSERIAL:
-		ret_val = set_serial_info(info, argp);
+		ret_val = cy_set_serial_info(info, tty, argp);
 		break;
 	case TIOCSERGETLSR:	/* Get line status register */
 		ret_val = get_lsr_info(info, argp);
@@ -3971,17 +2788,8 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		/* note the counters on entry */
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		ret_val = wait_event_interruptible(info->delta_msr_wait, ({
-			cprev = cnow;
-			spin_lock_irqsave(&info->card->card_lock, flags);
-			cnow = info->icount;	/* atomic copy */
-			spin_unlock_irqrestore(&info->card->card_lock, flags);
-
-			((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-			((arg & TIOCM_CTS) && (cnow.cts != cprev.cts));
-		}));
+		ret_val = wait_event_interruptible(info->port.delta_msr_wait,
+				cy_cflags_changed(info, arg, &cnow));
 		break;
 
 		/*
@@ -3990,46 +2798,29 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
 		 * NB: both 1->0 and 0->1 transitions are counted except for
 		 *     RI where only 0->1 is counted.
 		 */
-	case TIOCGICOUNT:
+	case TIOCGICOUNT: {
+		struct serial_icounter_struct sic = { };
+
 		spin_lock_irqsave(&info->card->card_lock, flags);
 		cnow = info->icount;
 		spin_unlock_irqrestore(&info->card->card_lock, flags);
-		p_cuser = argp;
-		ret_val = put_user(cnow.cts, &p_cuser->cts);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.dsr, &p_cuser->dsr);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.rng, &p_cuser->rng);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.dcd, &p_cuser->dcd);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.rx, &p_cuser->rx);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.tx, &p_cuser->tx);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.frame, &p_cuser->frame);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.overrun, &p_cuser->overrun);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.parity, &p_cuser->parity);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.brk, &p_cuser->brk);
-		if (ret_val)
-			break;
-		ret_val = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
-		if (ret_val)
-			break;
-		ret_val = 0;
+
+		sic.cts = cnow.cts;
+		sic.dsr = cnow.dsr;
+		sic.rng = cnow.rng;
+		sic.dcd = cnow.dcd;
+		sic.rx = cnow.rx;
+		sic.tx = cnow.tx;
+		sic.frame = cnow.frame;
+		sic.overrun = cnow.overrun;
+		sic.parity = cnow.parity;
+		sic.brk = cnow.brk;
+		sic.buf_overrun = cnow.buf_overrun;
+
+		if (copy_to_user(argp, &sic, sizeof(sic)))
+			ret_val = -EFAULT;
 		break;
+	}
 	default:
 		ret_val = -ENOIOCTLCMD;
 	}
@@ -4055,7 +2846,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
 #endif
 
-	set_line_char(info);
+	cy_set_line_char(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
 			!(tty->termios->c_cflag & CRTSCTS)) {
@@ -4112,8 +2903,6 @@ static void cy_throttle(struct tty_struct *tty)
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
 
 #ifdef CY_DEBUG_THROTTLE
 	char buf[64];
@@ -4135,24 +2924,9 @@ static void cy_throttle(struct tty_struct *tty)
 	}
 
 	if (tty->termios->c_cflag & CRTSCTS) {
-		channel = info->line - card->first_line;
 		if (!cy_is_Z(card)) {
-			chip = channel >> 2;
-			channel &= 0x03;
-			index = card->bus_index;
-			base_addr = card->base_addr +
-				(cy_chip_offset[chip] << index);
-
 			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  ~CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  ~CyRTS);
-			}
+			cyy_change_rts_dtr(info, 0, TIOCM_RTS);
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		} else {
 			info->throttle = 1;
@@ -4170,8 +2944,6 @@ static void cy_unthrottle(struct tty_struct *tty)
 	struct cyclades_port *info = tty->driver_data;
 	struct cyclades_card *card;
 	unsigned long flags;
-	void __iomem *base_addr;
-	int chip, channel, index;
 
 #ifdef CY_DEBUG_THROTTLE
 	char buf[64];
@@ -4192,24 +2964,9 @@ static void cy_unthrottle(struct tty_struct *tty)
 
 	if (tty->termios->c_cflag & CRTSCTS) {
 		card = info->card;
-		channel = info->line - card->first_line;
 		if (!cy_is_Z(card)) {
-			chip = channel >> 2;
-			channel &= 0x03;
-			index = card->bus_index;
-			base_addr = card->base_addr +
-				(cy_chip_offset[chip] << index);
-
 			spin_lock_irqsave(&card->card_lock, flags);
-			cy_writeb(base_addr + (CyCAR << index),
-				  (u_char) channel);
-			if (info->rtsdtr_inv) {
-				cy_writeb(base_addr + (CyMSVR2 << index),
-					  CyDTR);
-			} else {
-				cy_writeb(base_addr + (CyMSVR1 << index),
-					  CyRTS);
-			}
+			cyy_change_rts_dtr(info, TIOCM_RTS, 0);
 			spin_unlock_irqrestore(&card->card_lock, flags);
 		} else {
 			info->throttle = 0;
@@ -4224,8 +2981,7 @@ static void cy_stop(struct tty_struct *tty)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long flags;
 
 #ifdef CY_DEBUG_OTHER
@@ -4238,16 +2994,9 @@ static void cy_stop(struct tty_struct *tty)
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
 	if (!cy_is_Z(cinfo)) {
-		index = cinfo->bus_index;
-		chip = channel >> 2;
-		channel &= 0x03;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&cinfo->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index),
-			(u_char)(channel & 0x0003)); /* index channel */
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) & ~CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) & ~CyTxRdy);
 		spin_unlock_irqrestore(&cinfo->card_lock, flags);
 	}
 }				/* cy_stop */
@@ -4256,8 +3005,7 @@ static void cy_start(struct tty_struct *tty)
 {
 	struct cyclades_card *cinfo;
 	struct cyclades_port *info = tty->driver_data;
-	void __iomem *base_addr;
-	int chip, channel, index;
+	int channel;
 	unsigned long flags;
 
 #ifdef CY_DEBUG_OTHER
@@ -4269,17 +3017,10 @@ static void cy_start(struct tty_struct *tty)
 
 	cinfo = info->card;
 	channel = info->line - cinfo->first_line;
-	index = cinfo->bus_index;
 	if (!cy_is_Z(cinfo)) {
-		chip = channel >> 2;
-		channel &= 0x03;
-		base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index);
-
 		spin_lock_irqsave(&cinfo->card_lock, flags);
-		cy_writeb(base_addr + (CyCAR << index),
-			(u_char) (channel & 0x0003));	/* index channel */
-		cy_writeb(base_addr + (CySRER << index),
-			  readb(base_addr + (CySRER << index)) | CyTxRdy);
+		cyy_writeb(info, CyCAR, channel & 0x03);
+		cyy_writeb(info, CySRER, cyy_readb(info, CySRER) | CyTxRdy);
 		spin_unlock_irqrestore(&cinfo->card_lock, flags);
 	}
 }				/* cy_start */
@@ -4299,17 +3040,84 @@ static void cy_hangup(struct tty_struct *tty)
 		return;
 
 	cy_flush_buffer(tty);
-	shutdown(info);
-	info->port.count = 0;
-#ifdef CY_DEBUG_COUNT
-	printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
-		current->pid);
-#endif
-	info->port.tty = NULL;
-	info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
-	wake_up_interruptible(&info->port.open_wait);
+	cy_shutdown(info, tty);
+	tty_port_hangup(&info->port);
 }				/* cy_hangup */
 
+static int cyy_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	unsigned long flags;
+	int channel = info->line - cinfo->first_line;
+	u32 cd;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cyy_writeb(info, CyCAR, channel & 0x03);
+	cd = cyy_readb(info, CyMSVR1) & CyDCD;
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+
+	return cd;
+}
+
+static void cyy_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cinfo->card_lock, flags);
+	cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
+			raise ? 0 : TIOCM_RTS | TIOCM_DTR);
+	spin_unlock_irqrestore(&cinfo->card_lock, flags);
+}
+
+static int cyz_carrier_raised(struct tty_port *port)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+
+	return readl(&info->u.cyz.ch_ctrl->rs_status) & C_RS_DCD;
+}
+
+static void cyz_dtr_rts(struct tty_port *port, int raise)
+{
+	struct cyclades_port *info = container_of(port, struct cyclades_port,
+			port);
+	struct cyclades_card *cinfo = info->card;
+	struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
+	int ret, channel = info->line - cinfo->first_line;
+	u32 rs;
+
+	rs = readl(&ch_ctrl->rs_control);
+	if (raise)
+		rs |= C_RS_RTS | C_RS_DTR;
+	else
+		rs &= ~(C_RS_RTS | C_RS_DTR);
+	cy_writel(&ch_ctrl->rs_control, rs);
+	ret = cyz_issue_cmd(cinfo, channel, C_CM_IOCTLM, 0L);
+	if (ret != 0)
+		printk(KERN_ERR "%s: retval on ttyC%d was %x\n",
+				__func__, info->line, ret);
+#ifdef CY_DEBUG_DTR
+	printk(KERN_DEBUG "%s: raising Z DTR\n", __func__);
+#endif
+}
+
+static const struct tty_port_operations cyy_port_ops = {
+	.carrier_raised = cyy_carrier_raised,
+	.dtr_rts = cyy_dtr_rts,
+	.shutdown = cy_do_close,
+};
+
+static const struct tty_port_operations cyz_port_ops = {
+	.carrier_raised = cyz_carrier_raised,
+	.dtr_rts = cyz_dtr_rts,
+	.shutdown = cy_do_close,
+};
+
 /*
  * ---------------------------------------------------------------------
  * cy_init() and friends
@@ -4321,8 +3129,7 @@ static void cy_hangup(struct tty_struct *tty)
 static int __devinit cy_init_card(struct cyclades_card *cinfo)
 {
 	struct cyclades_port *info;
-	unsigned int port;
-	unsigned short chip_number;
+	unsigned int channel, port;
 
 	spin_lock_init(&cinfo->card_lock);
 	cinfo->intr_enabled = 0;
@@ -4334,9 +3141,9 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		return -ENOMEM;
 	}
 
-	for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
-			port++) {
-		info = &cinfo->ports[port - cinfo->first_line];
+	for (channel = 0, port = cinfo->first_line; channel < cinfo->nports;
+			channel++, port++) {
+		info = &cinfo->ports[channel];
 		tty_port_init(&info->port);
 		info->magic = CYCLADES_MAGIC;
 		info->card = cinfo;
@@ -4346,10 +3153,19 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 		info->port.close_delay = 5 * HZ / 10;
 		info->port.flags = STD_COM_FLAGS;
 		init_completion(&info->shutdown_wait);
-		init_waitqueue_head(&info->delta_msr_wait);
 
 		if (cy_is_Z(cinfo)) {
+			struct FIRM_ID *firm_id = cinfo->base_addr + ID_ADDRESS;
+			struct ZFW_CTRL *zfw_ctrl;
+
+			info->port.ops = &cyz_port_ops;
 			info->type = PORT_STARTECH;
+
+			zfw_ctrl = cinfo->base_addr +
+				(readl(&firm_id->zfwctrl_addr) & 0xfffff);
+			info->u.cyz.ch_ctrl = &zfw_ctrl->ch_ctrl[channel];
+			info->u.cyz.buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
+
 			if (cinfo->hw_ver == ZO_V1)
 				info->xmit_fifo_size = CYZ_FIFO_SIZE;
 			else
@@ -4359,17 +3175,20 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
 				cyz_rx_restart, (unsigned long)info);
 #endif
 		} else {
+			unsigned short chip_number;
 			int index = cinfo->bus_index;
+
+			info->port.ops = &cyy_port_ops;
 			info->type = PORT_CIRRUS;
 			info->xmit_fifo_size = CyMAX_CHAR_FIFO;
 			info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
 			info->cor2 = CyETC;
 			info->cor3 = 0x08;	/* _very_ small rcv threshold */
 
-			chip_number = (port - cinfo->first_line) / 4;
-			info->chip_rev = readb(cinfo->base_addr +
-				      (cy_chip_offset[chip_number] << index) +
-				      (CyGFRCR << index));
+			chip_number = channel / CyPORTS_PER_CHIP;
+			info->u.cyy.base_addr = cinfo->base_addr +
+				(cy_chip_offset[chip_number] << index);
+			info->chip_rev = cyy_readb(info, CyGFRCR);
 
 			if (info->chip_rev >= CD1400_REV_J) {
 				/* It is a CD1400 rev. J or later */
@@ -5060,8 +3879,14 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
 		}
 		cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
 	} else {
+		struct FIRM_ID __iomem *firm_id = addr2 + ID_ADDRESS;
+		struct ZFW_CTRL __iomem *zfw_ctrl;
+
+		zfw_ctrl = addr2 + (readl(&firm_id->zfwctrl_addr) & 0xfffff);
+
 		cy_card[card_no].hw_ver = mailbox;
 		cy_card[card_no].num_chips = (unsigned int)-1;
+		cy_card[card_no].board_ctrl = &zfw_ctrl->board_ctrl;
 #ifdef CONFIG_CYZ_INTR
 		/* allocate IRQ only if board has an IRQ */
 		if (irq != 0 && irq != 255) {
@@ -5191,18 +4016,30 @@ static int cyclades_proc_show(struct seq_file *m, void *v)
 		for (j = 0; j < cy_card[i].nports; j++) {
 			info = &cy_card[i].ports[j];
 
-			if (info->port.count)
+			if (info->port.count) {
+				/* XXX is the ldisc num worth this? */
+				struct tty_struct *tty;
+				struct tty_ldisc *ld;
+				int num = 0;
+				tty = tty_port_tty_get(&info->port);
+				if (tty) {
+					ld = tty_ldisc_ref(tty);
+					if (ld) {
+						num = ld->ops->num;
+						tty_ldisc_deref(ld);
+					}
+					tty_kref_put(tty);
+				}
 				seq_printf(m, "%3d %8lu %10lu %8lu "
-					"%10lu %8lu %9lu %6ld\n", info->line,
+					"%10lu %8lu %9lu %6d\n", info->line,
 					(cur_jifs - info->idle_stats.in_use) /
 					HZ, info->idle_stats.xmit_bytes,
 					(cur_jifs - info->idle_stats.xmit_idle)/
 					HZ, info->idle_stats.recv_bytes,
 					(cur_jifs - info->idle_stats.recv_idle)/
 					HZ, info->idle_stats.overruns,
-					/* FIXME: double check locking */
-					(long)info->port.tty->ldisc->ops->num);
-			else
+					num);
+			} else
 				seq_printf(m, "%3d %8lu %10lu %8lu "
 					"%10lu %8lu %9lu %6ld\n",
 					info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L);