drivers/block/umem: move private include away from include/linux

Move include/linux/umem.h to drivers/block, as umem.c is the only user,
and its not an exported header.

Move the PCI_{VENDOR,DEVICE}_ID_* constants to include/linux/pci_ids.h.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 133 insertions, 0 deletions

diff --git a/drivers/block/umem.h b/drivers/block/umem.h
new file mode 100644
index 000000000000..3a3819afed92
--- /dev/null
+++ b/drivers/block/umem.h
@@ -0,0 +1,133 @@
+
+/*
+ * This file contains defines for the
+ *   Micro Memory MM5415
+ * family PCI Memory Module with Battery Backup.
+ *
+ * Copyright Micro Memory INC 2001.  All rights reserved.
+ * Release under the terms of the GNU GENERAL PUBLIC LICENSE version 2.
+ * See the file COPYING.
+ */
+
+#ifndef _DRIVERS_BLOCK_MM_H
+#define _DRIVERS_BLOCK_MM_H
+
+
+#define IRQ_TIMEOUT (1 * HZ)
+
+/* CSR register definition */
+#define MEMCTRLSTATUS_MAGIC	0x00
+#define  MM_MAGIC_VALUE		(unsigned char)0x59
+
+#define MEMCTRLSTATUS_BATTERY	0x04
+#define  BATTERY_1_DISABLED	0x01
+#define  BATTERY_1_FAILURE	0x02
+#define  BATTERY_2_DISABLED	0x04
+#define  BATTERY_2_FAILURE	0x08
+
+#define MEMCTRLSTATUS_MEMORY	0x07
+#define  MEM_128_MB		0xfe
+#define  MEM_256_MB		0xfc
+#define  MEM_512_MB		0xf8
+#define  MEM_1_GB		0xf0
+#define  MEM_2_GB		0xe0
+
+#define MEMCTRLCMD_LEDCTRL	0x08
+#define  LED_REMOVE		2
+#define  LED_FAULT		4
+#define  LED_POWER		6
+#define	 LED_FLIP		255
+#define  LED_OFF		0x00
+#define  LED_ON			0x01
+#define  LED_FLASH_3_5		0x02
+#define  LED_FLASH_7_0		0x03
+#define  LED_POWER_ON		0x00
+#define  LED_POWER_OFF		0x01
+#define  USER_BIT1		0x01
+#define  USER_BIT2		0x02
+
+#define MEMORY_INITIALIZED	USER_BIT1
+
+#define MEMCTRLCMD_ERRCTRL	0x0C
+#define  EDC_NONE_DEFAULT	0x00
+#define  EDC_NONE		0x01
+#define  EDC_STORE_READ		0x02
+#define  EDC_STORE_CORRECT	0x03
+
+#define MEMCTRLCMD_ERRCNT	0x0D
+#define MEMCTRLCMD_ERRSTATUS	0x0E
+
+#define ERROR_DATA_LOG		0x20
+#define ERROR_ADDR_LOG		0x28
+#define ERROR_COUNT		0x3D
+#define ERROR_SYNDROME		0x3E
+#define ERROR_CHECK		0x3F
+
+#define DMA_PCI_ADDR		0x40
+#define DMA_LOCAL_ADDR		0x48
+#define DMA_TRANSFER_SIZE	0x50
+#define DMA_DESCRIPTOR_ADDR	0x58
+#define DMA_SEMAPHORE_ADDR	0x60
+#define DMA_STATUS_CTRL		0x68
+#define  DMASCR_GO		0x00001
+#define  DMASCR_TRANSFER_READ	0x00002
+#define  DMASCR_CHAIN_EN	0x00004
+#define  DMASCR_SEM_EN		0x00010
+#define  DMASCR_DMA_COMP_EN	0x00020
+#define  DMASCR_CHAIN_COMP_EN	0x00040
+#define  DMASCR_ERR_INT_EN	0x00080
+#define  DMASCR_PARITY_INT_EN	0x00100
+#define  DMASCR_ANY_ERR		0x00800
+#define  DMASCR_MBE_ERR		0x01000
+#define  DMASCR_PARITY_ERR_REP	0x02000
+#define  DMASCR_PARITY_ERR_DET	0x04000
+#define  DMASCR_SYSTEM_ERR_SIG	0x08000
+#define  DMASCR_TARGET_ABT	0x10000
+#define  DMASCR_MASTER_ABT	0x20000
+#define  DMASCR_DMA_COMPLETE	0x40000
+#define  DMASCR_CHAIN_COMPLETE	0x80000
+
+/* 
+3.SOME PCs HAVE HOST BRIDGES WHICH APPARENTLY DO NOT CORRECTLY HANDLE 
+READ-LINE (0xE) OR READ-MULTIPLE (0xC) PCI COMMAND CODES DURING DMA 
+TRANSFERS. IN OTHER SYSTEMS THESE COMMAND CODES WILL CAUSE THE HOST BRIDGE 
+TO ALLOW LONGER BURSTS DURING DMA READ OPERATIONS. THE UPPER FOUR BITS 
+(31..28) OF THE DMA CSR HAVE BEEN MADE PROGRAMMABLE, SO THAT EITHER A 0x6, 
+AN 0xE OR A 0xC CAN BE WRITTEN TO THEM TO SET THE COMMAND CODE USED DURING 
+DMA READ OPERATIONS.
+*/
+#define        DMASCR_READ   0x60000000
+#define        DMASCR_READLINE   0xE0000000
+#define        DMASCR_READMULTI   0xC0000000
+
+
+#define DMASCR_ERROR_MASK	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR | DMASCR_ANY_ERR)
+#define DMASCR_HARD_ERROR	(DMASCR_MASTER_ABT | DMASCR_TARGET_ABT | DMASCR_SYSTEM_ERR_SIG | DMASCR_PARITY_ERR_DET | DMASCR_MBE_ERR)
+
+#define WINDOWMAP_WINNUM	0x7B
+
+#define DMA_READ_FROM_HOST 0
+#define DMA_WRITE_TO_HOST 1
+
+struct mm_dma_desc {
+	__le64	pci_addr;
+	__le64	local_addr;
+	__le32	transfer_size;
+	u32	zero1;
+	__le64	next_desc_addr;
+	__le64	sem_addr;
+	__le32	control_bits;
+	u32	zero2;
+
+	dma_addr_t data_dma_handle;
+
+	/* Copy of the bits */
+	__le64	sem_control_bits;
+} __attribute__((aligned(8)));
+
+/* bits for card->flags */
+#define UM_FLAG_DMA_IN_REGS		1
+#define UM_FLAG_NO_BYTE_STATUS		2
+#define UM_FLAG_NO_BATTREG		4
+#define	UM_FLAG_NO_BATT			8
+#endif