Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 319 insertions, 0 deletions

diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c
new file mode 100644
index 000000000000..9f837d9a3639
--- /dev/null
+++ b/drivers/block/paride/on26.c
@@ -0,0 +1,319 @@
+/* 
+        on26.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+        on26.c is a low-level protocol driver for the 
+        OnSpec 90c26 parallel to IDE adapter chip.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+	1.02    GRG 1998.09.23 updates for the -E rev chip
+	1.03    GRG 1998.12.14 fix for slave drives
+	1.04    GRG 1998.12.20 yet another bug fix
+
+*/
+
+#define ON26_VERSION      "1.04"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+/* mode codes:  0  nybble reads, 8-bit writes
+                1  8-bit reads and writes
+                2  8-bit EPP mode
+		3  EPP-16
+		4  EPP-32
+*/
+
+#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
+
+#define P1	w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
+#define P2	w2(5);w2(7);w2(5);w2(4);
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int on26_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, r;
+
+	r = (regr<<2) + 1 + cont;
+
+        switch (pi->mode)  {
+
+        case 0: w0(1); P1; w0(r); P2; w0(0); P1; 
+		w2(6); a = r1(); w2(4);
+		w2(6); b = r1(); w2(4);
+		w2(6); w2(4); w2(6); w2(4);
+                return j44(a,b);
+
+        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+		w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
+                return a;
+
+	case 2:
+	case 3:
+        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+		w3(0); w3(0); w2(0x24); a = r4(); w2(4);
+		w2(0x24); r4(); w2(4);
+                return a;
+
+        }
+        return -1;
+}       
+
+static void on26_write_regr( PIA *pi, int cont, int regr, int val )
+
+{       int  r;
+
+        r = (regr<<2) + 1 + cont;
+
+        switch (pi->mode)  {
+
+        case 0:
+        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+		w0(val); P2; w0(val); P2;
+		break;
+
+	case 2:
+	case 3:
+        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+		w3(0); w3(0); 
+		w2(5); w4(val); w2(4);
+		w2(5); w4(val); w2(4);
+                break;
+        }
+}
+
+#define  CCP(x)  w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+		 w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void on26_connect ( PIA *pi )
+
+{       int	x;
+
+	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+        CCP(0x20);
+	x = 8; if (pi->mode) x = 9;
+
+	w0(2); P1; w0(8); P2;
+	w0(2); P1; w0(x); P2;
+}
+
+static void on26_disconnect ( PIA *pi )
+
+{       if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
+	              else { w0(4); P1; w0(4); P1; }
+	CCP(0x30);
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+} 
+
+#define	RESET_WAIT  200
+
+static int on26_test_port( PIA *pi)  /* hard reset */
+
+{       int     i, m, d, x=0, y=0;
+
+        pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+
+        d = pi->delay;
+        m = pi->mode;
+        pi->delay = 5;
+        pi->mode = 0;
+
+        w2(0xc);
+
+        CCP(0x30); CCP(0); 
+
+        w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
+        i = ((r1() & 0xf0) << 4); w0(0x87);
+        i |= (r1() & 0xf0); w0(0x78);
+        w0(0x20);w2(4);w2(5);
+        i |= ((r1() & 0xf0) >> 4);
+        w2(4);w0(0xff);
+
+        if (i == 0xb5f) {
+
+            w0(2); P1; w0(0);   P2;
+            w0(3); P1; w0(0);   P2;
+            w0(2); P1; w0(8);   P2; udelay(100);
+            w0(2); P1; w0(0xa); P2; udelay(100);
+            w0(2); P1; w0(8);   P2; udelay(1000);
+            
+            on26_write_regr(pi,0,6,0xa0);
+
+            for (i=0;i<RESET_WAIT;i++) {
+                on26_write_regr(pi,0,6,0xa0);
+                x = on26_read_regr(pi,0,7);
+                on26_write_regr(pi,0,6,0xb0);
+                y = on26_read_regr(pi,0,7);
+                if (!((x&0x80)||(y&0x80))) break;
+                mdelay(100);
+            }
+
+	    if (i == RESET_WAIT) 
+		printk("on26: Device reset failed (%x,%x)\n",x,y);
+
+            w0(4); P1; w0(4); P1;
+        }
+
+        CCP(0x30);
+
+        pi->delay = d;
+        pi->mode = m;
+        w0(pi->saved_r0);
+        w2(pi->saved_r2);
+
+        return 5;
+}
+
+
+static void on26_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, a, b;
+
+        switch (pi->mode) {
+
+        case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
+		udelay(10);
+		for (k=0;k<count;k++) {
+                        w2(6); a = r1();
+                        w2(4); b = r1();
+                        buf[k] = j44(a,b);
+                }
+		w0(2); P1; w0(8); P2; 
+                break;
+
+        case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+		udelay(10);
+                for (k=0;k<count/2;k++) {
+                        w2(0x26); buf[2*k] = r0();  
+			w2(0x24); buf[2*k+1] = r0();
+                }
+                w0(2); P1; w0(9); P2;
+                break;
+
+        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0x24);
+		udelay(10);
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4);
+                break;
+
+        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0x24);
+                udelay(10);
+                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4);
+                break;
+
+        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0x24);
+                udelay(10);
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4);
+                break;
+
+        }
+}
+
+static void on26_write_block( PIA *pi, char * buf, int count )
+
+{       int	k;
+
+        switch (pi->mode) {
+
+        case 0: 
+        case 1: w0(1); P1; w0(1); P2; 
+		w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
+		udelay(10);
+		for (k=0;k<count/2;k++) {
+                        w2(5); w0(buf[2*k]); 
+			w2(7); w0(buf[2*k+1]);
+                }
+                w2(5); w2(4);
+		w0(2); P1; w0(8+pi->mode); P2;
+                break;
+
+        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0xc5);
+		udelay(10);
+                for (k=0;k<count;k++) w4(buf[k]);
+		w2(0xc4);
+                break;
+
+        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0xc5);
+                udelay(10);
+                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
+                w3(0); w3(0); w2(0xc5);
+                udelay(10);
+                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
+                w2(0xc4);
+                break;
+
+        }
+
+}
+
+static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
+				   "EPP-16","EPP-32"};
+
+        printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
+                pi->device,ON26_VERSION,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol on26 = {
+	.owner		= THIS_MODULE,
+	.name		= "on26",
+	.max_mode	= 5,
+	.epp_first	= 2,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= on26_write_regr,
+	.read_regr	= on26_read_regr,
+	.write_block	= on26_write_block,
+	.read_block	= on26_read_block,
+	.connect	= on26_connect,
+	.disconnect	= on26_disconnect,
+	.test_port	= on26_test_port,
+	.log_adapter	= on26_log_adapter,
+};
+
+static int __init on26_init(void)
+{
+	return pi_register(&on26)-1;
+}
+
+static void __exit on26_exit(void)
+{
+	pi_unregister(&on26);
+}
+
+MODULE_LICENSE("GPL");
+module_init(on26_init)
+module_exit(on26_exit)