Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 297 insertions, 0 deletions

diff --git a/drivers/block/paride/kbic.c b/drivers/block/paride/kbic.c
new file mode 100644
index 000000000000..d983bcea76fe
--- /dev/null
+++ b/drivers/block/paride/kbic.c
@@ -0,0 +1,297 @@
+/*
+        kbic.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
+                              Under the terms of the GNU General Public License.
+
+        This is a low-level driver for the KBIC-951A and KBIC-971A
+        parallel to IDE adapter chips from KingByte Information Systems.
+
+	The chips are almost identical, however, the wakeup code 
+	required for the 971A interferes with the correct operation of
+        the 951A, so this driver registers itself twice, once for
+	each chip.
+
+*/
+
+/* Changes:
+
+        1.01    GRG 1998.05.06 init_proto, release_proto
+
+*/
+
+#define KBIC_VERSION      "1.01"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define r12w()			(delay_p,inw(pi->port+1)&0xffff) 
+
+#define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
+#define j53(w)                  (((w>>3)&0x1f)|((w>>4)&0xe0))
+
+
+/* cont = 0 - access the IDE register file 
+   cont = 1 - access the IDE command set 
+*/
+
+static int  cont_map[2] = { 0x80, 0x40 };
+
+static int kbic_read_regr( PIA *pi, int cont, int regr )
+
+{       int     a, b, s;
+
+        s = cont_map[cont];
+
+	switch (pi->mode) {
+
+	case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
+	        a = r1(); w0(0x28); b = r1(); w2(4);
+		return j44(a,b);
+
+	case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
+		a = r12w(); w2(4);
+		return j53(a);
+
+	case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
+		a = r0(); w2(4);
+       		return a;
+
+	case 3:
+	case 4:
+	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+		a = r4(); b = r4(); w2(4); w2(0); w2(4);
+		return a;
+
+	}
+	return -1;
+}       
+
+static void  kbic_write_regr( PIA *pi, int cont, int regr, int val)
+
+{       int  s;
+
+        s = cont_map[cont];
+
+        switch (pi->mode) {
+
+	case 0: 
+        case 1:
+	case 2:	w0(regr|0x10|s); w2(4); w2(6); w2(4); 
+		w0(val); w2(5); w2(4);
+		break;
+
+	case 3:
+	case 4:
+	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+		w4(val); w4(val);
+		w2(4); w2(0); w2(4);
+                break;
+
+	}
+}
+
+static void k951_connect ( PIA *pi  )
+
+{ 	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+        w2(4); 
+}
+
+static void k951_disconnect ( PIA *pi )
+
+{      	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+}
+
+#define	CCP(x)	w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
+		w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
+
+static void k971_connect ( PIA *pi  )
+
+{ 	pi->saved_r0 = r0();
+        pi->saved_r2 = r2();
+	CCP(0x20);
+        w2(4); 
+}
+
+static void k971_disconnect ( PIA *pi )
+
+{       CCP(0x30);
+	w0(pi->saved_r0);
+        w2(pi->saved_r2);
+}
+
+/* counts must be congruent to 0 MOD 4, but all known applications
+   have this property.
+*/
+
+static void kbic_read_block( PIA *pi, char * buf, int count )
+
+{       int     k, a, b;
+
+        switch (pi->mode) {
+
+        case 0: w0(0x98); w2(4); w2(6); w2(4);
+                for (k=0;k<count/2;k++) {
+			w2(1); w0(8);    a = r1();
+			       w0(0x28); b = r1();
+			buf[2*k]   = j44(a,b);
+			w2(5);           b = r1();
+			       w0(8);    a = r1();
+			buf[2*k+1] = j44(a,b);
+			w2(4);
+                } 
+                break;
+
+        case 1: w0(0xb8); w2(4); w2(6); w2(4); 
+                for (k=0;k<count/4;k++) {
+                        w0(0xb8); 
+			w2(4); w2(5); 
+                        w0(8);    buf[4*k]   = j53(r12w());
+			w0(0xb8); buf[4*k+1] = j53(r12w());
+			w2(4); w2(5);
+			          buf[4*k+3] = j53(r12w());
+			w0(8);    buf[4*k+2] = j53(r12w());
+                }
+                w2(4);
+                break;
+
+        case 2: w0(0x88); w2(4); w2(6); w2(4);
+                for (k=0;k<count/2;k++) {
+                        w2(0xa0); w2(0xa1); buf[2*k] = r0();
+                        w2(0xa5); buf[2*k+1] = r0();
+                }
+                w2(4);
+                break;
+
+        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for (k=0;k<count;k++) buf[k] = r4();
+                w2(4); w2(0); w2(4);
+                break;
+
+	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
+                w2(4); w2(0); w2(4);
+                break;
+
+        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
+                w2(4); w2(0); w2(4);
+                break;
+
+
+        }
+}
+
+static void kbic_write_block( PIA *pi, char * buf, int count )
+
+{       int     k;
+
+        switch (pi->mode) {
+
+        case 0:
+        case 1:
+        case 2: w0(0x90); w2(4); w2(6); w2(4); 
+		for(k=0;k<count/2;k++) {
+			w0(buf[2*k+1]); w2(0); w2(4); 
+			w0(buf[2*k]);   w2(5); w2(4); 
+		}
+		break;
+
+        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for(k=0;k<count/2;k++) {
+			w4(buf[2*k+1]); 
+                        w4(buf[2*k]);
+                }
+		w2(4); w2(0); w2(4);
+		break;
+
+	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
+                w2(4); w2(0); w2(4);
+                break;
+
+        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+                for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
+                w2(4); w2(0); w2(4);
+                break;
+
+        }
+
+}
+
+static void kbic_log_adapter( PIA *pi, char * scratch, 
+			      int verbose, char * chip )
+
+{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
+				   "EPP-8","EPP_16","EPP-32"};
+
+        printk("%s: kbic %s, KingByte %s at 0x%x, ",
+                pi->device,KBIC_VERSION,chip,pi->port);
+        printk("mode %d (%s), delay %d\n",pi->mode,
+		mode_string[pi->mode],pi->delay);
+
+}
+
+static void k951_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{	kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
+}
+
+static void k971_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{       kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
+}
+
+static struct pi_protocol k951 = {
+	.owner		= THIS_MODULE,
+	.name		= "k951",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= kbic_write_regr,
+	.read_regr	= kbic_read_regr,
+	.write_block	= kbic_write_block,
+	.read_block	= kbic_read_block,
+	.connect	= k951_connect,
+	.disconnect	= k951_disconnect,
+	.log_adapter	= k951_log_adapter,
+};
+
+static struct pi_protocol k971 = {
+	.owner		= THIS_MODULE,
+	.name		= "k971",
+	.max_mode	= 6,
+	.epp_first	= 3,
+	.default_delay	= 1,
+	.max_units	= 1,
+	.write_regr	= kbic_write_regr,
+	.read_regr	= kbic_read_regr,
+	.write_block	= kbic_write_block,
+	.read_block	= kbic_read_block,
+	.connect	= k971_connect,
+	.disconnect	= k971_disconnect,
+	.log_adapter	= k971_log_adapter,
+};
+
+static int __init kbic_init(void)
+{
+	return (pi_register(&k951)||pi_register(&k971))-1;
+}
+
+static void __exit kbic_exit(void)
+{
+	pi_unregister(&k951);
+	pi_unregister(&k971);
+}
+
+MODULE_LICENSE("GPL");
+module_init(kbic_init)
+module_exit(kbic_exit)